CIENA-WS-SYSTEM-MIB: View SNMP OID List / Download MIB

VENDOR: CIENA CORPORATION


 Home MIB: CIENA-WS-SYSTEM-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, CIENA-WS-MIB, CIENA-WS-TYPEDEFS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cienaWsSystemMIB 1.3.6.1.4.1.1271.3.4.12
This YANG module defines Ciena's WaveServer System representation for the NETCONF protocol
       cienaWsSystemObjects 1.3.6.1.4.1.1271.3.4.12.1
       cienaWsSystemConformance 1.3.6.1.4.1.1271.3.4.12.2
           cienaWsSystemGroups 1.3.6.1.4.1.1271.3.4.12.2.1
               cienaWsSystemGroup 1.3.6.1.4.1.1271.3.4.12.2.1.1
Conformance Group
           cienaWsSystemCompliances 1.3.6.1.4.1.1271.3.4.12.2.2
               cienaWsSystemCompliance 1.3.6.1.4.1.1271.3.4.12.2.2.1
Compliance
       cwsSystemSiteTable 1.3.6.1.4.1.1271.3.4.12.3 no-access
Waveserver system site attributes.
           cwsSystemSiteEntry 1.3.6.1.4.1.1271.3.4.12.3.1 no-access
Entry for cwsSystemSiteTable.
               cwsSystemSiteTableSnmpKey 1.3.6.1.4.1.1271.3.4.12.3.1.1 integer32 no-access
Unique key for cwsSystemSite
               cwsSystemSiteId 1.3.6.1.4.1.1271.3.4.12.3.1.2 unsigned32 read-write
An integer to uniquely identify the site where this Waveserver is located. This is used to help group Waveservers together with line system equipment. All equipment in a common site should share the same site identifier.
               cwsSystemSiteName 1.3.6.1.4.1.1271.3.4.12.3.1.3 octet string read-write
The name for the site where the Waveserver is located.
               cwsSystemSiteDescription 1.3.6.1.4.1.1271.3.4.12.3.1.4 octet string read-write
The site description
               cwsSystemSiteLatitude 1.3.6.1.4.1.1271.3.4.12.3.1.5 decimal32len5 read-write
Geographic coordinate for the site location in degrees.
               cwsSystemSiteLongitude 1.3.6.1.4.1.1271.3.4.12.3.1.6 decimal32len5 read-write
Geographic coordinate for the site location in degrees.
               cwsSystemSiteAddress 1.3.6.1.4.1.1271.3.4.12.3.1.7 octet string read-write
The street address of the site.
       cwsSystemGroupTable 1.3.6.1.4.1.1271.3.4.12.4 no-access
Waveserver system group attributes.
           cwsSystemGroupEntry 1.3.6.1.4.1.1271.3.4.12.4.1 no-access
Entry for cwsSystemGroupTable.
               cwsSystemGroupTableSnmpKey 1.3.6.1.4.1.1271.3.4.12.4.1.1 integer32 no-access
Unique key for cwsSystemGroup
               cwsSystemGroupId 1.3.6.1.4.1.1271.3.4.12.4.1.2 unsigned32 read-write
An integer to uniquely identify a group of Waveservers within a site.
               cwsSystemGroupName 1.3.6.1.4.1.1271.3.4.12.4.1.3 octet string read-write
A name for the group of Waveservers.
               cwsSystemGroupDescription 1.3.6.1.4.1.1271.3.4.12.4.1.4 octet string read-write
A description for the group of Waveservers.
       cwsSystemMemberTable 1.3.6.1.4.1.1271.3.4.12.5 no-access
Waveserver system member attributes.
           cwsSystemMemberEntry 1.3.6.1.4.1.1271.3.4.12.5.1 no-access
Entry for cwsSystemMemberTable.
               cwsSystemMemberTableSnmpKey 1.3.6.1.4.1.1271.3.4.12.5.1.1 integer32 no-access
Unique key for cwsSystemMember
               cwsSystemMemberId 1.3.6.1.4.1.1271.3.4.12.5.1.2 unsigned32 read-write
An integer to uniquely identify a Waveserver chassis within a group of Waveservers. Initial configuration of this identifier automatically assigns 2 specific wavelengths for the Ciena wavelength grid to the Wavelogic 3 Extreme ports 1 and 12. Wavelengths can also be manually assigned independently.
               cwsSystemMemberName 1.3.6.1.4.1.1271.3.4.12.5.1.3 octet string read-write
A name for the Waveserver chassis.
               cwsSystemMemberDescription 1.3.6.1.4.1.1271.3.4.12.5.1.4 octet string read-write
A description for the Waveserver chassis.
               cwsSystemMemberFrameIdentification 1.3.6.1.4.1.1271.3.4.12.5.1.5 octet string read-write
A description to identify the location of the Waveserver chassis within the data center. For example, the building, floor, aisle, frame number, etc.
               cwsSystemMemberRackUnitNumber 1.3.6.1.4.1.1271.3.4.12.5.1.6 unsigned32 read-write
A logical identifier for the Waveservers location within the frame or rack. For example, the device at the top could be labelled unit 1.
       cwsSystemHostNameTable 1.3.6.1.4.1.1271.3.4.12.6 no-access
Waveserver system host name attributes.
           cwsSystemHostNameEntry 1.3.6.1.4.1.1271.3.4.12.6.1 no-access
Entry for cwsSystemHostNameTable.
               cwsSystemHostNameTableSnmpKey 1.3.6.1.4.1.1271.3.4.12.6.1.1 integer32 no-access
Unique key for cwsSystemHostName
               cwsSystemHostNameCurrentHostName 1.3.6.1.4.1.1271.3.4.12.6.1.2 stringmaxl64 read-only
Current host name.
               cwsSystemHostNameConfigHostName 1.3.6.1.4.1.1271.3.4.12.6.1.3 stringmaxl64 read-write
User configured host name.
               cwsSystemHostNameDhcpHostName 1.3.6.1.4.1.1271.3.4.12.6.1.4 stringmaxl64 read-only
DHCP Host name.
       cwsSystemTimeConfigTable 1.3.6.1.4.1.1271.3.4.12.7 no-access
Waveserver system time configuration attributes.
           cwsSystemTimeConfigEntry 1.3.6.1.4.1.1271.3.4.12.7.1 no-access
Entry for cwsSystemTimeConfigTable.
               cwsSystemTimeConfigTableSnmpKey 1.3.6.1.4.1.1271.3.4.12.7.1.1 integer32 no-access
Unique key for cwsSystemTimeConfig
               cwsSystemTimeConfigDate 1.3.6.1.4.1.1271.3.4.12.7.1.2 octet string read-write
Date: must be in format: yyyy-mm-dd, or yy-mm-dd, or mm-dd.
               cwsSystemTimeConfigTime 1.3.6.1.4.1.1271.3.4.12.7.1.3 octet string read-write
Time: must be in format: hh:mm:ss
               cwsSystemTimeConfigTimeOffset 1.3.6.1.4.1.1271.3.4.12.7.1.4 decimal32len2 read-write
System time-offset from UTC in seconds.
               cwsSystemTimeConfigTimeStamp 1.3.6.1.4.1.1271.3.4.12.7.1.5 integer read-write
System time stamp format: local time or UTC time. Enumeration: 'utc': 0, 'local': 1.
               cwsSystemTimeConfigLocalDateTime 1.3.6.1.4.1.1271.3.4.12.7.1.6 octet string read-only
Local date and time Time
               cwsSystemTimeConfigCoordinatedUniversalTime 1.3.6.1.4.1.1271.3.4.12.7.1.7 octet string read-only
UTC date and time Time
               cwsSystemTimeConfigSystemUptime 1.3.6.1.4.1.1271.3.4.12.7.1.8 octet string read-only
Time since last reboot, in format: xxxd xxh xxm xxs
       cwsSystemServerConfigTable 1.3.6.1.4.1.1271.3.4.12.8 no-access
Waveserver system server configuration attributes.
           cwsSystemServerConfigEntry 1.3.6.1.4.1.1271.3.4.12.8.1 no-access
Entry for cwsSystemServerConfigTable.
               cwsSystemServerConfigTableSnmpKey 1.3.6.1.4.1.1271.3.4.12.8.1.1 integer32 no-access
Unique key for cwsSystemServerConfig
               cwsSystemServerConfigSftpServerState 1.3.6.1.4.1.1271.3.4.12.8.1.2 enableddisabledenum read-write
Indicate whether SFTP server is enabled.
               cwsSystemServerConfigWebServerState 1.3.6.1.4.1.1271.3.4.12.8.1.3 enableddisabledenum read-write
Indicate whether web server is enabled, HTTPS only.
               cwsSystemServerConfigNetconfServerState 1.3.6.1.4.1.1271.3.4.12.8.1.4 enableddisabledenum read-write
Indicate whether netconf server is enabled.
               cwsSystemServerConfigRestconfServerState 1.3.6.1.4.1.1271.3.4.12.8.1.5 enableddisabledenum read-write
Indicate whether RESTCONF server is enabled, HTTPS only.
       cwsSystemXftpConfigTable 1.3.6.1.4.1.1271.3.4.12.9 no-access
Waveserver system XFTP configuration attributes.
           cwsSystemXftpConfigEntry 1.3.6.1.4.1.1271.3.4.12.9.1 no-access
Entry for cwsSystemXftpConfigTable.
               cwsSystemXftpConfigTableSnmpKey 1.3.6.1.4.1.1271.3.4.12.9.1.1 integer32 no-access
Unique key for cwsSystemXftpConfig
               cwsSystemXftpConfigMode 1.3.6.1.4.1.1271.3.4.12.9.1.2 integer read-only
XFTP mode: FTP, SFTP, or TFTP Enumeration: 'ftp': 2, 'none': 0, 'scp': 4, 'tftp': 1, 'sftp': 3.
       cwsSystemTftpTable 1.3.6.1.4.1.1271.3.4.12.10 no-access
Waveserver system TFTP configuration.
             cwsSystemTftpEntry 1.3.6.1.4.1.1271.3.4.12.10.1 no-access
Entry for cwsSystemTftpTable.
                 cwsSystemTftpTableSnmpKey 1.3.6.1.4.1.1271.3.4.12.10.1.1 integer32 no-access
Unique key for cwsSystemTftp
                 cwsSystemTftpConfigHostName 1.3.6.1.4.1.1271.3.4.12.10.1.2 stringmaxl64 read-write
TFTP host name configured by user.
                 cwsSystemTftpDhcpHostName 1.3.6.1.4.1.1271.3.4.12.10.1.3 stringmaxl64 read-write
TFTP DHCP host name.
                 cwsSystemTftpCurrentHostName 1.3.6.1.4.1.1271.3.4.12.10.1.4 stringmaxl64 read-write
TFTP current host name.
       cwsSystemFtpTable 1.3.6.1.4.1.1271.3.4.12.11 no-access
Waveserver system FTP configuration.
             cwsSystemFtpEntry 1.3.6.1.4.1.1271.3.4.12.11.1 no-access
Entry for cwsSystemFtpTable.
                 cwsSystemFtpTableSnmpKey 1.3.6.1.4.1.1271.3.4.12.11.1.1 integer32 no-access
Unique key for cwsSystemFtp
                 cwsSystemFtpHostName 1.3.6.1.4.1.1271.3.4.12.11.1.2 stringmaxl64 read-write
FTP host name configured by user.
                 cwsSystemFtpUserName 1.3.6.1.4.1.1271.3.4.12.11.1.3 stringmaxl32 read-write
FTP user name.
                 cwsSystemFtpPassword 1.3.6.1.4.1.1271.3.4.12.11.1.4 stringmaxl128 read-write
FTP password string.
                 cwsSystemFtpSecret 1.3.6.1.4.1.1271.3.4.12.11.1.5 stringmaxl256 read-write
FTP secret string.
       cwsSystemSftpTable 1.3.6.1.4.1.1271.3.4.12.12 no-access
Waveserver system SFTP configuration.
             cwsSystemSftpEntry 1.3.6.1.4.1.1271.3.4.12.12.1 no-access
Entry for cwsSystemSftpTable.
                 cwsSystemSftpTableSnmpKey 1.3.6.1.4.1.1271.3.4.12.12.1.1 integer32 no-access
Unique key for cwsSystemSftp
                 cwsSystemSftpHostName 1.3.6.1.4.1.1271.3.4.12.12.1.2 stringmaxl64 read-write
SFTP host name configured by user.
                 cwsSystemSftpUserName 1.3.6.1.4.1.1271.3.4.12.12.1.3 stringmaxl32 read-write
SFTP user name.
                 cwsSystemSftpPassword 1.3.6.1.4.1.1271.3.4.12.12.1.4 stringmaxl128 read-write
SFTP password string.
                 cwsSystemSftpSecret 1.3.6.1.4.1.1271.3.4.12.12.1.5 stringmaxl256 read-write
SFTP secret string.
       cwsSystemGlobalProvisioningTable 1.3.6.1.4.1.1271.3.4.12.13 no-access
Waveserver system global provisioning attributes.
             cwsSystemGlobalProvisioningEntry 1.3.6.1.4.1.1271.3.4.12.13.1 no-access
Entry for cwsSystemGlobalProvisioningTable.
                 cwsSystemGlobalProvisioningTableSnmpKey 1.3.6.1.4.1.1271.3.4.12.13.1.1 integer32 no-access
Unique key for cwsSystemGlobalProvisioning
                 cwsSystemGlobalProvisioningLowPowerMode 1.3.6.1.4.1.1271.3.4.12.13.1.2 enableddisabledenum read-write
Low power mode is enabled or disabled
                 cwsSystemGlobalProvisioningLampTest 1.3.6.1.4.1.1271.3.4.12.13.1.3 enableddisabledenum read-write
Enable to initiate chassis level lamp test. Disable to end the test.
                 cwsSystemGlobalProvisioningResetToFactoryDefaultButton 1.3.6.1.4.1.1271.3.4.12.13.1.4 enableddisabledenum read-write
Indicate whether the reset button for reset to factory default is enabled. If enabled, the reset button on the faceplate will trigger a reset to factory default settings
                 cwsSystemGlobalProvisioningFcsErrorForwarding 1.3.6.1.4.1.1271.3.4.12.13.1.5 truthvalue read-write
FCS error forwarding settings.
                 cwsSystemGlobalProvisioningChassisFunctionality 1.3.6.1.4.1.1271.3.4.12.13.1.6 stringmaxl16 read-write
Description of chassis functionality, used by MCP.
       cwsSystemFrontDisplayTable 1.3.6.1.4.1.1271.3.4.12.14 no-access
Waveserver system front display configuration.
             cwsSystemFrontDisplayEntry 1.3.6.1.4.1.1271.3.4.12.14.1 no-access
Entry for cwsSystemFrontDisplayTable.
                 cwsSystemFrontDisplayTableSnmpKey 1.3.6.1.4.1.1271.3.4.12.14.1.1 integer32 no-access
Unique key for cwsSystemFrontDisplay
                 cwsSystemFrontDisplayAdminState 1.3.6.1.4.1.1271.3.4.12.14.1.2 enableddisabledenum read-write
Display is enabled or disabled. When the display is disabled, it will be turned off and will not be woken up by pressing on the faceplate navigation buttons
                 cwsSystemFrontDisplayScreensaverState 1.3.6.1.4.1.1271.3.4.12.14.1.3 enableddisabledenum read-write
Screensaver is enabled or disabled. When the screensaver is enabled, the LED display on the faceplate will be automatically turned off after N minutes of inactivity. If an input button is pressed, it will turn the display back on. The length of the screensaver idle time is controlled by the screensaver-timeout parameter.
                 cwsSystemFrontDisplayScreensaverTimeout 1.3.6.1.4.1.1271.3.4.12.14.1.4 unsigned32 read-write
Number of minutes before screensaver activates. The screensaver can be disabled via the display-screensaver-state attribute. The display can be completely disabled via the display-admin-state attribute.
                 cwsSystemFrontDisplayInputButtonState 1.3.6.1.4.1.1271.3.4.12.14.1.5 enableddisabledenum read-write
Enable or disable display input control.
                 cwsSystemFrontDisplayUserMessageState 1.3.6.1.4.1.1271.3.4.12.14.1.6 enableddisabledenum read-write
Enable or disable user message display. If a user-message has been provisioned, enabling it via this parameter will display that message on the LED display. This leaf is now obsolete in WS 1.5
                 cwsSystemFrontDisplayUserMessage 1.3.6.1.4.1.1271.3.4.12.14.1.7 octet string read-write
Message to be shown on the display. This is a custom message to be displayed on the LED display.
       cwsSystemLineConfigTable 1.3.6.1.4.1.1271.3.4.12.15 no-access
Waveserver system line configuration.
             cwsSystemLineConfigEntry 1.3.6.1.4.1.1271.3.4.12.15.1 no-access
Entry for cwsSystemLineConfigTable.
                 cwsSystemLineConfigTableSnmpKey 1.3.6.1.4.1.1271.3.4.12.15.1.1 integer32 no-access
Unique key for cwsSystemLineConfig
                 cwsSystemLineConfigBandPlan 1.3.6.1.4.1.1271.3.4.12.15.1.2 bandplanenum read-write
Band Plan. The band plan is a way of selecting a mapping between channels and wavelengths/frequencies. The selected band plan should correspond to the band plan on the line system. The band plan is used to automatically select the next wavelength or frequency for newly installed Waveservers based on the member-id assigned to the device. Modifying Band plan will have an effect on PTP attributes. Software will automatically assign a per-defined PTP Wavelength, Frequency, and Channel combination from selected Band Plan. Note that the automatic reassignment will only occur when a valid Band Plan is already provisioned (i.e. existing Band Plan is not equal to None), the existing PTP Wavelength, Frequency, and Channel have value of zero, and user provisions Member ID from 0 to a non-zero value (i.e. from 'uncommisioned' state to 'commissioned' state) that's within the maximum wavelength allocation specified in the Band Plan (each Member ID reserves two wavelengths) . Software shall automatically update existing channel number provisioning when user changes Band Plan provisioning. Channel number shall be set to 0 if provisioned wavelength/frequency is not found in the new Band Plan or the new Band Plan equals to None.
                 cwsSystemLineConfigLineProtection 1.3.6.1.4.1.1271.3.4.12.15.1.3 lineprotectionenum read-write
Line protection settings. If line protection is enabled, this means that the photonic line the Waveserver is connected to has protection enabled. In the event of a line side fault, the protection card on the line side will select the protection path and the modems will reacquire the signal on the alternate path. While the switch is occuring, link state messaging will be disabled to the clients so that the connected devices do not attempt a switch or a restoration.
       cwsSystemLampFlashTestTable 1.3.6.1.4.1.1271.3.4.12.16 no-access
Waveserver lamp flash test attributes.
             cwsSystemLampFlashTestEntry 1.3.6.1.4.1.1271.3.4.12.16.1 no-access
Entry for cwsSystemLampFlashTestTable.
                 cwsSystemLampFlashTestTableSnmpKey 1.3.6.1.4.1.1271.3.4.12.16.1.1 integer32 no-access
Unique key for cwsSystemLampFlashTest
                 cwsSystemLampFlashTestOperationalState 1.3.6.1.4.1.1271.3.4.12.16.1.2 enableddisabledenum read-only
Lamp flash test operational state. It reflects whether the lamp flash test is enabled or disabled.
                 cwsSystemLampFlashTestMode 1.3.6.1.4.1.1271.3.4.12.16.1.3 lampmodeenum read-only
Lamp mode selection. The default mode is flash. It is the only mode supported
                 cwsSystemLampFlashTestTargetType 1.3.6.1.4.1.1271.3.4.12.16.1.4 lamptargettypeenum read-write
Lamp testing target type. It can be chassis or port. The default type is chassis. When the target-type is port, the port list should be set for the selected ports to be tested.
                 cwsSystemLampFlashTestTimeout 1.3.6.1.4.1.1271.3.4.12.16.1.5 unsigned32 read-write
The number of minutes the lamp flash testing will be operating when enabled. The default timeout value is 30 minutes
                 cwsSystemLampFlashTestPorts 1.3.6.1.4.1.1271.3.4.12.16.1.6 bits read-write
Ports selected for lamp flash test. The bits in this leaf represent port number from 1 to 12, starting from position 1. When target-type is port and lamp-flash-test is enabled, the selected ports (bit is set) will have its lamp operate in the mode set. When the target-type is chassis, this leaf should not be specified or should be empty. Bits: 'port12': 11, 'port11': 10, 'port10': 9, 'port8': 7, 'port9': 8, 'port6': 5, 'port7': 6, 'port4': 3, 'port5': 4, 'port2': 1, 'port3': 2, 'port1': 0.
       cwsSystemRootTable 1.3.6.1.4.1.1271.3.4.12.18 no-access
Waveserver system user root configuration.
             cwsSystemRootEntry 1.3.6.1.4.1.1271.3.4.12.18.1 no-access
Entry for cwsSystemRootTable.
                 cwsSystemRootTableSnmpKey 1.3.6.1.4.1.1271.3.4.12.18.1.1 integer32 no-access
Unique key for cwsSystemRoot
                 cwsSystemRootPassword 1.3.6.1.4.1.1271.3.4.12.18.1.2 stringmaxl128 read-only
User root password string.
       cwsSystemScpTable 1.3.6.1.4.1.1271.3.4.12.19 no-access
Waveserver system SCP configuration.
             cwsSystemScpEntry 1.3.6.1.4.1.1271.3.4.12.19.1 no-access
Entry for cwsSystemScpTable.
                 cwsSystemScpTableSnmpKey 1.3.6.1.4.1.1271.3.4.12.19.1.1 integer32 no-access
Unique key for cwsSystemScp
                 cwsSystemScpHostName 1.3.6.1.4.1.1271.3.4.12.19.1.2 stringmaxl64 read-write
SCP host name configured by user.
                 cwsSystemScpUserName 1.3.6.1.4.1.1271.3.4.12.19.1.3 stringmaxl32 read-write
SCP user name.
                 cwsSystemScpPassword 1.3.6.1.4.1.1271.3.4.12.19.1.4 stringmaxl128 read-write
SCP password string.
                 cwsSystemScpSecret 1.3.6.1.4.1.1271.3.4.12.19.1.5 stringmaxl256 read-write
SCP secret string.
       cwsSystemDhcpTable 1.3.6.1.4.1.1271.3.4.12.21 no-access
Waveserver DHCP client configuration attributes.
             cwsSystemDhcpEntry 1.3.6.1.4.1.1271.3.4.12.21.1 no-access
Entry for cwsSystemDhcpTable.
                 cwsSystemDhcpTableSnmpKey 1.3.6.1.4.1.1271.3.4.12.21.1.1 integer32 no-access
Unique key for cwsSystemDhcp
                 cwsSystemDhcpAdminState 1.3.6.1.4.1.1271.3.4.12.21.1.2 enableddisabledenum read-only
DHCP Client Administrative State