CIENA-CES-RSVPTE-MIB: View SNMP OID List / Download MIB

VENDOR: CIENA CORPORATION


 Home MIB: CIENA-CES-RSVPTE-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, CIENA-SMI, CIENA-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cienaCesRsvpteMIB 1.3.6.1.4.1.1271.2.1.16
This MIB module is for the RSVP-TE configuration for MPLS tunnels
       cienaCesRsvpteMIBObjects 1.3.6.1.4.1.1271.2.1.16.1
           cienaCesRsvpteObjects 1.3.6.1.4.1.1271.2.1.16.1.1
               cienaCesRsvpteAdminStatus 1.3.6.1.4.1.1271.2.1.16.1.1.1 cienaglobalstate read-only
The desired administrative status of RSVP-TE.
               cienaCesRsvpteOperStatus 1.3.6.1.4.1.1271.2.1.16.1.1.2 rsvpoperstatus read-only
The current operational status of RSVP-TE.
               cienaCesRsvpteRetryInterval 1.3.6.1.4.1.1271.2.1.16.1.1.3 unsigned32 read-only
The persistent tunnel retry interval. This is the interval between the first failure of a persistent tunnel and the first attempt to re-establish the tunnel. This cannot be changed while the administrative status is enabled or the operational status is up.
               cienaCesRsvpteRetryInfiniteState 1.3.6.1.4.1.1271.2.1.16.1.1.4 integer read-only
The persistent tunnel retry infinity. This is the state which when on, triggers RSVP-TE to try to restore the tunnels infinite times. This object can only be set if RSVP-TE is globally disabled. Enumeration: 'on': 1, 'off': 2.
               cienaCesRsvpteRetryMax 1.3.6.1.4.1.1271.2.1.16.1.1.5 integer read-only
The maximum number of retry attempts that will be made before a persistent tunnel is deemed inoperable. Once in this state, a management agent should set mplsTunnelAdminStatus to 'up' to attempt to re-establish the tunnel. This field is not used when cienaCesRsvpteRetryInfiniteState is on.
               cienaCesRsvpteRefreshInterval 1.3.6.1.4.1.1271.2.1.16.1.1.6 integer32 read-only
The RSVP-TE value, R, which is used to set the average interval between refresh path and RESV messages.
               cienaCesRsvpteRefreshMultiple 1.3.6.1.4.1.1271.2.1.16.1.1.7 integer32 read-only
The RSVP-TE value, K, which is the number of unresponded path or RESV refresh attempts that must be made, spaced by the refresh interval, before the state is deemed to have timed out.
               cienaCesRsvpteRfrshSlewDenom 1.3.6.1.4.1.1271.2.1.16.1.1.8 integer32 read-only
This object is deprecated and the new object to provide this information is cienaCesRsvpteRefreshSlewDenominator in this table.
               cienaCesRsvpteRfrshSlewNumerator 1.3.6.1.4.1.1271.2.1.16.1.1.9 integer32 read-only
This object is deprecated and the new object to provide this information is cienaCesRsvpteRefreshSlewNumerator in this table.
               cienaCesRsvpteBlockadeMultiple 1.3.6.1.4.1.1271.2.1.16.1.1.10 integer32 read-only
The RSVP-TE value, Kb, which is the number of refresh timeout periods after which the blockade state is deleted.
               cienaCesRsvpteLSPSetupPriority 1.3.6.1.4.1.1271.2.1.16.1.1.11 integer32 read-only
The setup priority to apply to LSPs that are not signaling this parameter. 0 represents the highest priority and 7 the lowest. The value of this object must be numerically greater than or equal to (lower or equal priority) than the value of the holding priority object.
               cienaCesRsvpteLSPHoldingPriority 1.3.6.1.4.1.1271.2.1.16.1.1.12 integer32 read-only
The holding priority to apply to LSPs that are not signaling this parameter. 0 represents the highest priority and 7 the lowest. The value of this object must be numerically less than or equal to (higher or equal priority) than the value of the holding priority object.
               cienaCesRsvpteUseHopByHop 1.3.6.1.4.1.1271.2.1.16.1.1.13 truthvalue read-only
A flag to indicate that RSVP-TE should use the hop by hop addressing scheme for the PATH and PATH-TEAR messages it sends. If set, then the IP addresses used in the IP header of the PATH messages forwarded by RSVP-TE set the source as the local outgoing interface IP address, and set the destination as the next hop router IP address.
               cienaCesRsvpteRestartCapable 1.3.6.1.4.1.1271.2.1.16.1.1.14 truthvalue read-only
A flag to indicate whether the local node should advertise itself as restart capable.
               cienaCesRsvpteRestartTime 1.3.6.1.4.1.1271.2.1.16.1.1.15 unsigned32 read-only
The time in milliseconds that the local node takes to restart RSVP-TE and the communication channel used for RSVP-TE communication. This is advertised to neighbors in the Restart_Cap object in Hello messages. Only used if cienaCesRsvpteRestartCapable is set to true. For devices which only act as the Helper node, this timer is unused and will return value 0.
               cienaCesRsvpteRecoveryTime 1.3.6.1.4.1.1271.2.1.16.1.1.16 unsigned32 read-only
The period of time in milliseconds that the local node would like neighbors to take to resyncronize RSVP-TE and MPLS forwarding information after the re-establishment of Hello connectivity. This is advertised to neighbors in the Restart_Cap object in Hello messages. A value of zero indicates that the node does not support resynchronization following failure of the local node. A value of 0xFFFFFFFF indicates an infinite recovery time. Only used if cienaCesRsvpteRestartCapable is set to true. For devices which only act as the Helper node, this timer is unused and will return value 0.
               cienaCesRsvpteMinPeerRestart 1.3.6.1.4.1.1271.2.1.16.1.1.17 integer32 read-only
The mininum period of time in milliseconds that RSVP-TE should wait for a restart capable neighbor to regain Hello connectivity before invoking procedures related to communication loss. RSVP-TE waits for the maximum of this time and the restart_time advertised in the RESTART_CAP object in Hello messages from the neighbor.
               cienaCesRsvpteRefreshSlewDenominator 1.3.6.1.4.1.1271.2.1.16.1.1.18 integer32 read-only
The denominator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is increased by this fraction until it reaches the new desired value.
               cienaCesRsvpteRefreshSlewNumerator 1.3.6.1.4.1.1271.2.1.16.1.1.19 integer32 read-only
The numerator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is increased by this fraction until it reaches the new desired value.
               cienaCesRsvpteGRAdminStatus 1.3.6.1.4.1.1271.2.1.16.1.1.20 cienaglobalstate read-only
RSVP-TE Graceful restart status (Enabled/Disabled).
               cienaCesRsvpteGRMode 1.3.6.1.4.1.1271.2.1.16.1.1.21 rsvpgrmode read-only
RSVP-TE Graceful restart Operational status.
           cienaCesRsvpte 1.3.6.1.4.1.1271.2.1.16.1.2
               cienaCesRsvpteIfTable 1.3.6.1.4.1.1271.2.1.16.1.2.1 no-access
A table of interfaces on which RSVP-TE can be enabled.
                   cienaCesRsvpteIfEntry 1.3.6.1.4.1.1271.2.1.16.1.2.1.1 no-access
An entry in the RSVP-TE interface table.
                       cienaCesRsvpteIfIndex 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.1 integer no-access
Interface index.
                       cienaCesRsvpteIfName 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.2 octet string read-only
Interface name.
                       cienaCesRsvpteIfIpAddr 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.3 ipaddress read-only
Interface IP address.
                       cienaCesRsvpteIfMtu 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.4 integer read-only
This object is deprecated and no longer in use.
                       cienaCesRsvpteIfAdminStatus 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.5 cienaglobalstate read-only
RSVP-TE administrative status on this interface.
                       cienaCesRsvpteIfOperStatus 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.6 integer read-only
RSVP-TE operational status on this interface. Enumeration: 'down': 2, 'up': 1.
                       cienaCesRsvpteIfHelloInterval 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.7 unsigned32 read-only
RSVP-TE Hello message interval.
                       cienaCesRsvpteIfHelloTolerance 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.8 unsigned32 read-only
RSVP-TE Hello tolerance defines the number of Hello intervals that can pass without receiving a successful Hello message from a partner before the Hello session times out.
                       cienaCesRsvpteIfAdvertisedLabel 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.9 advertisedlabel read-only
This object indicates what kind of label will be advertised by RSVP-TE for a Label Request received on this L3 interface.