CDD-564: View SNMP OID List / Download MIB

VENDOR: COMTECH EFDATA CORPORATION


 Home MIB: CDD-564
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, ComtechEFData

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cdd564 1.3.6.1.4.1.6247.25
Module for CDD-564 Satellite Demod
       cdd564Objects 1.3.6.1.4.1.6247.25.1
           cdd564Administration 1.3.6.1.4.1.6247.25.1.1
               cdd564AccessLists 1.3.6.1.4.1.6247.25.1.1.1
                   cdd564AccessListTable 1.3.6.1.4.1.6247.25.1.1.1.1 no-access
The table for the access list.
                       cdd564AccessListEntry 1.3.6.1.4.1.6247.25.1.1.1.1.1 no-access
The entry for the access list table.
                           cdd564AccessListIndex 1.3.6.1.4.1.6247.25.1.1.1.1.1.1 integer read-only
The index for the access list from 1..4.
                           cdd564AccessIPAddress 1.3.6.1.4.1.6247.25.1.1.1.1.1.2 ipaddress read-write
The IP addresses that can access the unit. The value of 0.0.0.0 means not defined.
                           cdd564AccessSubnetMaskLength 1.3.6.1.4.1.6247.25.1.1.1.1.1.3 integer read-write
The subnet mask length of the IP address for the access list. Subnet mask can be from 8..32. The value of 0 means not defined.
                   cdd564AccessListEnforcement 1.3.6.1.4.1.6247.25.1.1.1.2 integer read-write
Enable or disable enforcement of the the access list. Note: Be sure that you have added the SNMP browser's/manager's IP Address to the access list before enabling access list filtering. Otherwise, the SNMP browser/manager will no longer be able to gain access to the unit. Enumeration: 'disabled': 0, 'enabled': 1.
               cdd564Features 1.3.6.1.4.1.6247.25.1.1.2
                   cdd564PingReply 1.3.6.1.4.1.6247.25.1.1.2.1 integer read-write
Enable or disable ping reply from unit. Enumeration: 'disabled': 0, 'enabled': 1.
                   cdd564Telnet 1.3.6.1.4.1.6247.25.1.1.2.2 integer read-write
Enable or disable telnet access to unit. Enumeration: 'disabled': 0, 'enabled': 1.
                   cdd564IGMP 1.3.6.1.4.1.6247.25.1.1.2.3 integer read-write
Enable or disable the Internet Group Management Protocol (IGMP). Enumeration: 'disabled': 0, 'enabled': 1.
                   cdd564ForwardMulticasts 1.3.6.1.4.1.6247.25.1.1.2.4 integer read-write
Enable or disable forwarding all multicasts received from the Satellite interface to the Ethernet interface. Enumeration: 'disabled': 0, 'enabled': 1.
                   cdd564FeaturesTable 1.3.6.1.4.1.6247.25.1.1.2.5 no-access
The table (per demodulator) of FAST Features.
                       cdd564FeaturesEntry 1.3.6.1.4.1.6247.25.1.1.2.5.1 no-access
The entry for the FAST Feature (per demod) table.
                           cdd564FeatureIndex 1.3.6.1.4.1.6247.25.1.1.2.5.1.1 integer read-only
The index for the FAST Feature (per demod) table.
                           cdd564HeaderCompression 1.3.6.1.4.1.6247.25.1.1.2.5.1.2 integer read-write
Availability of header compression is based on FAST features Note: To use header compression, it must be FAST available and enabled on both the transmit and receive sides. Enumeration: 'disabled': 2, 'enabled': 1, 'unavailable': 0.
                   cdd564WorkingMode 1.3.6.1.4.1.6247.25.1.1.2.6 integer read-write
Configure the system's working mode. The CDM-IP can operate in any of these modes. 1. Router - Small Network Mode - The system functions as router and uses the route table to determine how to forward packets in a small network HDLC address mode. The HDLC packet uses a 1 byte HDLC address. The valid values are from 1 to 254 (0x1 - 0xFE). 2. Router - Small Network Mode - The system functions as router and uses the route table to determine how to forward packets in a large network HDLC address mode. The HDLC packet uses a 2- byte HDLC address. The valid values are from 1 to 32766 (0x1 - 0x7FFE). 3. Router - Point To Point Mode - The system functions as router but does not use HDLC addresses. 4. Router - Vipersat Mode - The system functions as router and is configured to work in a Vipersat network. *** IMPORTANT NOTE *** Changing Working mode requires the system to reboot. System configuration is saved before rebooting. Please make sure you are setting the correct value. Enumeration: 'routerVipersatMode': 4, 'routerPointToPointMode': 3, 'routerSmallNetworkMode': 1, 'routerLargeNetworkMode': 2.
               cdd5643xDESEncryption 1.3.6.1.4.1.6247.25.1.1.3
                   cdd5643xDESRxKeyTable 1.3.6.1.4.1.6247.25.1.1.3.1 no-access
The table (one row per demod) for triple DES (3xDES) receive decrypt keys.
                       cdd5643xDESRxKeyEntry 1.3.6.1.4.1.6247.25.1.1.3.1.1 no-access
The entry (per demod) of the 3xDES receive decrypt key table.
                           cdd5643xDESRxKeyIndex 1.3.6.1.4.1.6247.25.1.1.3.1.1.1 integer read-only
The index (per demod) of the 3xDES receive decrypt key table.
                           cdd5643xDESRxKey1 1.3.6.1.4.1.6247.25.1.1.3.1.1.2 displaystring read-write
The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters).
                           cdd5643xDESRxKey2 1.3.6.1.4.1.6247.25.1.1.3.1.1.3 displaystring read-write
The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters).
                           cdd5643xDESRxKey3 1.3.6.1.4.1.6247.25.1.1.3.1.1.4 displaystring read-write
The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters).
                           cdd5643xDESRxKey4 1.3.6.1.4.1.6247.25.1.1.3.1.1.5 displaystring read-write
The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters).
                           cdd5643xDESRxKey5 1.3.6.1.4.1.6247.25.1.1.3.1.1.6 displaystring read-write
The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters).
                           cdd5643xDESRxKey6 1.3.6.1.4.1.6247.25.1.1.3.1.1.7 displaystring read-write
The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters).
                           cdd5643xDESRxKey7 1.3.6.1.4.1.6247.25.1.1.3.1.1.8 displaystring read-write
The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters).
                           cdd5643xDESRxKey8 1.3.6.1.4.1.6247.25.1.1.3.1.1.9 displaystring read-write
The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters).
               cdd564SMTP 1.3.6.1.4.1.6247.25.1.1.4
                   cdd564SMTPServerIPAddress 1.3.6.1.4.1.6247.25.1.1.4.1 ipaddress read-write
The IP address of the SMTP server for sending problem reports. This IP adderess should correspond to a local Mail server.
                   cdd564SMTPDomain 1.3.6.1.4.1.6247.25.1.1.4.2 displaystring read-write
The SMTP Domain for sending problem reports. This value should be comtechefdata.com.
                   cdd564SMTPUserName 1.3.6.1.4.1.6247.25.1.1.4.3 displaystring read-write
The user name for sending problem reports. This value should be cdmipsupport.
               cdd564SNMP 1.3.6.1.4.1.6247.25.1.1.5
                   cdd564SNMPTrapDestinationIPAddress 1.3.6.1.4.1.6247.25.1.1.5.1 ipaddress read-write
The IP address were SNMP notifications (traps) are to be sent. This IP address should correspond to a SNMP manager or browser.
                   cdd564SNMPTrapCommunity 1.3.6.1.4.1.6247.25.1.1.5.2 displaystring read-write
The community that will be included in SNMP notifications (traps) that are sent from unit.
                   cdd564SNMPTrapVersion 1.3.6.1.4.1.6247.25.1.1.5.3 integer read-write
The SNMP version that will be used when sending traps from the unit. SNMPv1 will send V1 traps. SNMPv2 will send V2 notifications. Enumeration: 'snmpV1': 1, 'snmpV2': 2.
                   cdd564SNMPAuthenticationFailureCommunity 1.3.6.1.4.1.6247.25.1.1.5.4 displaystring no-access
The community that did not match valid SNMP Read or Write community. Note: This is ONLY used in the Authentication Failure trap.
                   cdd564SNMPAuthenticationFailureIPAddress 1.3.6.1.4.1.6247.25.1.1.5.5 ipaddress no-access
The IP address that did not send a valid SNMP Read or Write community. Note: This is ONLY used in the Authentication Failure trap.
                   cdd564SNMPTrapDestinationIPAddress2 1.3.6.1.4.1.6247.25.1.1.5.6 ipaddress read-write
The secondary IP address were SNMP notifications (traps) are to be sent. This IP address should correspond to a secondary SNMP manager or browser.
           cdd564Interfaces 1.3.6.1.4.1.6247.25.1.2
               cdd564EthernetInterface 1.3.6.1.4.1.6247.25.1.2.1
                   cdd564MACAddress 1.3.6.1.4.1.6247.25.1.2.1.1 displaystring read-only
The MAC address assigned to the Ethernet interface.
                   cdd564EthernetSpeed 1.3.6.1.4.1.6247.25.1.2.1.2 integer read-write
The speed of the Ethernet interface. Enumeration: 'auto': 1, 'fullDuplex10M': 4, 'fullDuplex100M': 5, 'halfDuplex10M': 2, 'halfDuplex100M': 3.
                   cdd564IPAddress 1.3.6.1.4.1.6247.25.1.2.1.3 ipaddress read-write
The IP address assigned to the Ethernet interface.
                   cdd564SubnetMaskLen 1.3.6.1.4.1.6247.25.1.2.1.4 integer read-write
The subnet mask length of the IP address.
               cdd564DemodulatorInterfaces 1.3.6.1.4.1.6247.25.1.2.2
                   cdd564HDLCAddressMode 1.3.6.1.4.1.6247.25.1.2.2.2 integer read-only
The size of HDLC address used for sending packets over satellite interface can range from 0 - 2 bytes. The satellite interface will operate in one of the following modes: 1.Small Network mode - The packet uses a 1 byte HDLC address. The valid values are from 1 to 254 (0x1 - 0xFE). 2.Large Network mode - The packet uses a 2 byte HDLC address. The valid values are from 1 to 32766 (0x1 - 0x7FFE). 3. Point To Point mode - The packet does not use a HDLC address. An HDLC address cannot have 0x00 or 0xFF in least Significant Byte. i.e., 0x400 or 0x6ff or 0x11ff are NOT valid HDLC addresses. Enumeration: 'smallNetworkMode': 1, 'largeNetworkMode': 2, 'pointToPointMode': 3.
                   cdd564HDLCAddressTable 1.3.6.1.4.1.6247.25.1.2.2.3 no-access
The table for the Demodulator HDLC Addresses.
                       cdd564HDLCAddressEntry 1.3.6.1.4.1.6247.25.1.2.2.3.1 no-access
The entry of the HDLC Address table.
                           cdd564HDLCAddressIndex 1.3.6.1.4.1.6247.25.1.2.2.3.1.1 integer read-only
The Demod number corresponding to 1 of 4 demodulators.
                           cdd564HDLCAddress1 1.3.6.1.4.1.6247.25.1.2.2.3.1.3 integer read-write
The HDLC address #1 for the satellite interface. The valid values are: 1. Small network, 1 to 254 (0x1 - 0xFE). 2. Large network, 1 to 32766 (0x1 - 0x0x7FFE). 3. Point to point, not used. 4. EasyConnect, not used. HDLC address can not have 0x00 or 0xFF in least significant byte, i.e., 0x400 or 0x6ff or 0x11ff are NOT valid HDLC addresses. Deletion: To delete the HDLC address, set it to zero.
                           cdd564HDLCAddress2 1.3.6.1.4.1.6247.25.1.2.2.3.1.4 integer read-write
The HDLC address #2 for the satellite interface. The valid values are: 1. Small network, 1 to 254 (0x1 - 0xFE). 2. Large network, 1 to 32766 (0x1 - 0x0x7FFE). 3. Point to point, not used. 4. EasyConnect, not used. HDLC address can not have 0x00 or 0xFF in least significant byte, i.e., 0x400 or 0x6ff or 0x11ff are NOT valid HDLC addresses. Deletion: To delete the HDLC address, set it to zero.
                           cdd564HDLCAddress3 1.3.6.1.4.1.6247.25.1.2.2.3.1.5 integer read-write
The HDLC address #3 for the satellite interface. The valid values are: 1. Small network, 1 to 254 (0x1 - 0xFE). 2. Large network, 1 to 32766 (0x1 - 0x0x7FFE). 3. Point to point, not used. 4. EasyConnect, not used. HDLC address can not have 0x00 or 0xFF in least significant byte, i.e., 0x400 or 0x6ff or 0x11ff are NOT valid HDLC addresses. Deletion: To delete the HDLC address, set it to zero.
                           cdd564HDLCAddress4 1.3.6.1.4.1.6247.25.1.2.2.3.1.6 integer read-write
The HDLC address #4 for the satellite interface. The valid values are: 1. Small network, 1 to 254 (0x1 - 0xFE). 2. Large network, 1 to 32766 (0x1 - 0x0x7FFE). 3. Point to point, not used. 4. EasyConnect, not used. HDLC address can not have 0x00 or 0xFF in least significant byte, i.e., 0x400 or 0x6ff or 0x11ff are NOT valid HDLC addresses. Deletion: To delete the HDLC address, set it to zero.
           cdd564Routes 1.3.6.1.4.1.6247.25.1.3
               cdd564RouteTable 1.3.6.1.4.1.6247.25.1.3.1 no-access
The route table used in Router mode.
                   cdd564RouteEntry 1.3.6.1.4.1.6247.25.1.3.1.1 no-access
The entry for the the route table.
                       cdd564RouteIndex 1.3.6.1.4.1.6247.25.1.3.1.1.1 integer read-write
The index for the route table.
                       cdd564RouteName 1.3.6.1.4.1.6247.25.1.3.1.1.2 displaystring read-write
The name of the route. All routes must be named.
                       cdd564RouteDestAddress 1.3.6.1.4.1.6247.25.1.3.1.1.3 ipaddress read-write
The destination IP address for the route.
                       cdd564RouteDestMaskLen 1.3.6.1.4.1.6247.25.1.3.1.1.4 integer read-write
The subnet mask lenght for the destination IP address.
                       cdd564RouteNextHopAddress 1.3.6.1.4.1.6247.25.1.3.1.1.5 ipaddress read-write
The next hop IP address for the route.
                       cdd564RouteMulticast 1.3.6.1.4.1.6247.25.1.3.1.1.6 integer read-write
If the route is a multicast, packets can be: 1. forwarded 2. filtered If the route is unicast, the field is not applicable. Enumeration: 'forward': 1, 'notApplicable': 0, 'filtered': 2.
                       cdd564RouteInterface 1.3.6.1.4.1.6247.25.1.3.1.1.7 integer read-write
Routes are destined to the Ethernet interface. Enumeration: 'toEthernet': 2.
                       cdd564RouteRowStatus 1.3.6.1.4.1.6247.25.1.3.1.1.8 integer read-write
This value is used for status of route: active(1) - The route is active. These values are used to create or delete route: createAndGo(4) - The route is to be created. destroy(6) - The route to be deleted. Enumeration: 'createAndWait': 5, 'notInService': 2, 'notReady': 3, 'createAndGo': 4, 'active': 1, 'destroy': 6.
           cdd564Protocols 1.3.6.1.4.1.6247.25.1.4
               cdd564IGMPConfig 1.3.6.1.4.1.6247.25.1.4.1
                   cdd564IGMPServer 1.3.6.1.4.1.6247.25.1.4.1.1
                       cdd564IGMPQueryPeriod 1.3.6.1.4.1.6247.25.1.4.1.1.1 integer read-write
The IGMP query period, in seconds.
                       cdd564IGMPMaxResponseTime 1.3.6.1.4.1.6247.25.1.4.1.1.2 integer read-write
The IGMP maximum response time, in seconds.
                       cdd564IGMPMaxMissBeforeLeavingGroup 1.3.6.1.4.1.6247.25.1.4.1.1.3 integer read-write
The maximum number of missed responses before leaving the IGMP group.
                   cdd564IGMPTable 1.3.6.1.4.1.6247.25.1.4.1.3 no-access
The table for IGMP groups.
                       cdd564IGMPEntry 1.3.6.1.4.1.6247.25.1.4.1.3.1 no-access
The entry for the IGMP group table.
                           cdd564IGMPIndex 1.3.6.1.4.1.6247.25.1.4.1.3.1.1 integer read-only
The index for the IGMP group table.
                           cdd564IGMPTTL 1.3.6.1.4.1.6247.25.1.4.1.3.1.2 integer read-only
The TTL for the multicast group.
                           cdd564IGMPClientState 1.3.6.1.4.1.6247.25.1.4.1.3.1.3 integer read-only
The state for the multicast group. Enumeration: 'active': 2, 'idle': 1, 'closing': 3.
                           cdd564IGMPSrc 1.3.6.1.4.1.6247.25.1.4.1.3.1.4 integer read-only
The interface from which the multicast group was received. Enumeration: 'ethernet': 1, 'satellite': 2.
                           cdd564IGMPGroupIPAddress 1.3.6.1.4.1.6247.25.1.4.1.3.1.5 ipaddress read-only
The multicast group address.
           cdd564Maint 1.3.6.1.4.1.6247.25.1.5
               cdd564UnitInformation 1.3.6.1.4.1.6247.25.1.5.1
                   cdd564BootInfo 1.3.6.1.4.1.6247.25.1.5.1.1 displaystring read-only
The version and revision information for the boot application.
                   cdd564Bulk1Info 1.3.6.1.4.1.6247.25.1.5.1.2 displaystring read-only
The version and revision information for the bulk application in image 1.
                   cdd564Bulk2Info 1.3.6.1.4.1.6247.25.1.5.1.3 displaystring read-only
The version and revision information for the bulk application in image 2.
                   cdd564FPGARx1Info 1.3.6.1.4.1.6247.25.1.5.1.4 displaystring read-only
The version and revision information for the Rx FPGA in image 1.
                   cdd564FPGARx2Info 1.3.6.1.4.1.6247.25.1.5.1.5 displaystring read-only
The version and revision information for the Rx FPGA in image 2.
               cdd564BulkDatabase 1.3.6.1.4.1.6247.25.1.5.2
                   cdd564BootImage 1.3.6.1.4.1.6247.25.1.5.2.1 integer read-write
Specifies which image will be booted: latest - boots the latest image determined by the most recent build date image 1 - boots image from bulk #1 image 2 - boots image from bulk #2 Enumeration: 'image2': 2, 'image1': 1, 'latest': 0.
                   cdd564UpgradeImage 1.3.6.1.4.1.6247.25.1.5.2.2 integer read-write
Specifies which image will be overwritten during an upgrade: oldest - overwrites the oldest image determined by build date. image 1 - overwrites image 1 image 2 - overwrites image 2 NOTE: Set this value before performing an upgrade. Enumeration: 'image2': 2, 'image1': 1, 'oldest': 0.
               cdd564ParamDatabase 1.3.6.1.4.1.6247.25.1.5.3
                   cdd564ParamImage 1.3.6.1.4.1.6247.25.1.5.3.1 integer read-write
Specifies if configuration should be read from: paramFile - parameter file stored in flash factoryDefaults - the factory defaults Enumeration: 'paramFile': 1, 'factoryDefaults': 2.
                   cdd564SaveParamToFlash 1.3.6.1.4.1.6247.25.1.5.3.2 integer read-write
This is a SET command to save the configuration to the parameter file in flash. Enumeration: 'save': 1.
                   cdd564ReloadParamFromFlash 1.3.6.1.4.1.6247.25.1.5.3.3 integer read-write
This is a SET command to reload the configuration from the parameter file in flash. Enumeration: 'reload': 1.
                   cdd564RestoreFactoryDefaults 1.3.6.1.4.1.6247.25.1.5.3.4 integer read-write
This is a SET command that restore the configuration to the factory defaults. *** Imporant *** Setting this command ERASES the parameter file in flash. Enumeration: 'restore': 1.
               cdd564RebootUnit 1.3.6.1.4.1.6247.25.1.5.4
                   cdd564Reboot 1.3.6.1.4.1.6247.25.1.5.4.1 integer read-write
The is a SET command that will reboot the unit. *** Important *** The command will reboot the unit without saving the configuration to the parameter file in flash. Enumeration: 'reboot': 1.
           cdd564Statistics 1.3.6.1.4.1.6247.25.1.6
               cdd564IPRoutingStatistics 1.3.6.1.4.1.6247.25.1.6.1
                   cdd564IPRoutingEthernet 1.3.6.1.4.1.6247.25.1.6.1.1
                       cdd564TotalPacketsToEthernet 1.3.6.1.4.1.6247.25.1.6.1.1.1 counter32 read-only
The total number of IP packets routed to the Ethernet interface.
                       cdd564TotalUnicastsToEthernet 1.3.6.1.4.1.6247.25.1.6.1.1.2 counter32 read-only
The total number of Unicast packets routed to the Ethernet interface.
                       cdd564TotalMulticastsToEthernet 1.3.6.1.4.1.6247.25.1.6.1.1.3 counter32 read-only
The total number of Multicast packets routed to the Ethernet interface.
                       cdd564TotalBroadcastsToEthernet 1.3.6.1.4.1.6247.25.1.6.1.1.4 counter32 read-only
The total number of Broadcast packets routed to the Ethernet interface.
                       cdd564TotalPacketsFromEthernet 1.3.6.1.4.1.6247.25.1.6.1.1.5 counter32 read-only
The total number of IP packets received from the Ethernet interface.
                   cdd564IPRoutingSatellite 1.3.6.1.4.1.6247.25.1.6.1.2
                       cdd564TotalPacketsFromSatellite 1.3.6.1.4.1.6247.25.1.6.1.2.1 counter32 read-only
The total number of IP packets received from the satellite interfaces.
                   cdd564IPRoutingEndstation 1.3.6.1.4.1.6247.25.1.6.1.3
                       cdd564TotalPacketsFromEndstation 1.3.6.1.4.1.6247.25.1.6.1.3.1 counter32 read-only
The total number of packets received from the Endstation to be sent out one of the interfaces.
                       cdd564TotalPacketsToEndstation 1.3.6.1.4.1.6247.25.1.6.1.3.2 counter32 read-only
The total number of packets sent to the Endstation from one of the interfaces.
                   cdd564IPRoutingMisc 1.3.6.1.4.1.6247.25.1.6.1.4
                       cdd564IGMPPacketsReceived 1.3.6.1.4.1.6247.25.1.6.1.4.1 counter32 read-only
The total number of IGMP packets received by the endstation.
                       cdd564IPOptionPacketsReceived 1.3.6.1.4.1.6247.25.1.6.1.4.2 counter32 read-only
The total number of packets received with IP Options in the IP header.
                   cdd564IPRoutingDropped 1.3.6.1.4.1.6247.25.1.6.1.5
                       cdd564TotalDroppedPackets 1.3.6.1.4.1.6247.25.1.6.1.5.1 counter32 read-only
The total number of packets dropped by the router.
                       cdd564DroppedPacketsBadIPHeader 1.3.6.1.4.1.6247.25.1.6.1.5.2 counter32 read-only
The total number of packets dropped by the router because of a bad checksum in the IP header.
                       cdd564DroppedPacketsBadBufferLength 1.3.6.1.4.1.6247.25.1.6.1.5.3 counter32 read-only
The total number of packets dropped by the router because of a bad packet buffer length.
                       cdd564DroppedPacketsBadIPVersion 1.3.6.1.4.1.6247.25.1.6.1.5.4 counter32 read-only
The total number of packets dropped by the router because of the packet is not IPv4. Note: IPv6 packets are not support by the router.
                       cdd564DroppedPacketsTTLExpired 1.3.6.1.4.1.6247.25.1.6.1.5.5 counter32 read-only
The total number of packets dropped by the router because the TTL (time to live) in the IP header had expired (i.e. reached zero).
                       cdd564DroppedPacketsNoRoute 1.3.6.1.4.1.6247.25.1.6.1.5.6 counter32 read-only
The total number of packets dropped by the router because the packet did not match any route in the route table and could not be forwarded.
                       cdd564DroppedPacketsNoARPEntry 1.3.6.1.4.1.6247.25.1.6.1.5.7 counter32 read-only
The total number of packets dropped by the router because the ARP table did not have an ARP entry for the packet's next hop.
                       cdd564DroppedPacketsFilteredMulticast 1.3.6.1.4.1.6247.25.1.6.1.5.8 counter32 read-only
The total number of multicast packets dropped by the router because the multicast address is not being forwarded.
                       cdd564DroppedPacketsMulticastDisableGroup 1.3.6.1.4.1.6247.25.1.6.1.5.9 counter32 read-only
The total number of multicast packets dropped by the router because the multicast group is not being forwarded.
                       cdd564DroppedPacketsFiltered 1.3.6.1.4.1.6247.25.1.6.1.5.10 counter32 read-only
The total number of packets dropped by the router for the following reasons: 1. Boot 2. Flow Descriptor 3. Unknown Reason Code 4. Flow Correlator 5. Management Path 6. Ping 7. Access Control 8. Vipersat Multicommand 9. Vipersat Unicommand 10. Codeload 11. Multicast 12. Bad Packet 13. Route 14. Bad Header Len 15. Bad Data Ptr 16. MAC Split Err 17. L3Type Err 18. Local Destination 19. ICMP Filter 20. Port Err 21. Per port route rule
                       cdd564DroppedPacketsRouterQueueFull 1.3.6.1.4.1.6247.25.1.6.1.5.11 counter32 read-only
The total number of packets dropped by the router because the router queue is full.
                   cdd564IPRoutingClearCounters 1.3.6.1.4.1.6247.25.1.6.1.6 integer read-write
This is a SET command to clear the IP routing counters. Enumeration: 'clear': 1.
               cdd564EthernetStatistics 1.3.6.1.4.1.6247.25.1.6.2
                   cdd564EthernetTxStats 1.3.6.1.4.1.6247.25.1.6.2.1
                       cdd564EtherTxGoodFrames 1.3.6.1.4.1.6247.25.1.6.2.1.1 counter32 read-only
The number of transmitted good frames from the Ethernet interface.
                       cdd564EtherTxMaxCollisions 1.3.6.1.4.1.6247.25.1.6.2.1.2 counter32 read-only
The number of frames that were NOT transmitted because they encountered the maximum configured collisions. This counter should only increment when network is heavily saturated with traffic.
                       cdd564EtherTxLateCollisions 1.3.6.1.4.1.6247.25.1.6.2.1.3 counter32 read-only
The number of frames that were NOT transmitted because they encountered collision outside the normal collision window.
                       cdd564EtherTxDMAUnderrun 1.3.6.1.4.1.6247.25.1.6.2.1.4 counter32 read-only
The number of frames that were either NOT transmitted or retransmitted due to Transmit DMA underrun. Underruns occur due to lack of PCI bandwidth resulting in the internal transmit FIFO running dry during the transmission of a frame.
                       cdd564EtherTxLostCarrierSense 1.3.6.1.4.1.6247.25.1.6.2.1.5 counter32 read-only
The number of frames transmitted by the device despite the fact that it detected the de-assertion of Transmit Lost Carrier Sense (CRS) during the transmission.
                       cdd564EtherTxDeferred 1.3.6.1.4.1.6247.25.1.6.2.1.6 counter32 read-only
The number of frames deferred before transmission due to activity on the link.
                       cdd564EtherTxSingleCollisions 1.3.6.1.4.1.6247.25.1.6.2.1.7 counter32 read-only
The number of transmitted frames that encountered only 1 collision.
                       cdd564EtherTxMultipleCollisions 1.3.6.1.4.1.6247.25.1.6.2.1.8 counter32 read-only
The number of transmitted frames that encountered more than 1 collision.
                       cdd564EtherTxTotalCollisions 1.3.6.1.4.1.6247.25.1.6.2.1.9 counter32 read-only
The total number of collisions that were encountered while attempting to transmit. This count includes late collisions and collisions from frames that encountered maximum collisions.
                       cdd564EtherTxFlowControlPauseFrames 1.3.6.1.4.1.6247.25.1.6.2.1.10 counter32 read-only
The number of flow control frames transmitted by the device. This count includes both the XOFF and XON frames transmitted by the device.
                   cdd564EthernetRxStats 1.3.6.1.4.1.6247.25.1.6.2.2
                       cdd564EtherRxGoodFrames 1.3.6.1.4.1.6247.25.1.6.2.2.1 counter32 read-only
The number of frames properly received from the link. It is updated only after actual reception from the link is completed and all data bytes are stored in memory.
                       cdd564EtherRxCRCErrorFrames 1.3.6.1.4.1.6247.25.1.6.2.2.2 counter32 read-only
The number of aligned frames discarded due to CRC Errors.
                       cdd564EtherRxAllignmentErrors 1.3.6.1.4.1.6247.25.1.6.2.2.3 counter32 read-only
The number of frames that are both misaligned [in other words, CRS de-asserts on a non-octet boundary] and contain a CRC error.
                       cdd564EtherRxResourceErrors 1.3.6.1.4.1.6247.25.1.6.2.2.4 counter32 read-only
The number of good frames discarded due to unavailable resources.
                       cdd564EtherRxFIFOOverrunErrors 1.3.6.1.4.1.6247.25.1.6.2.2.5 counter32 read-only
The number of frames known to be lost because the internal receive FIFO overflowed [also known as receive overrun]. This can occur if the device is unable to get necessary PCI bandwidth. If the overflow condition persists for more than one frame, the frames that follow the first can also be lost. A frame that was counted as an overrun will not be counted in other error counters like (short frames, misaligned, CRC error).
                       cdd564EtherRxCollisionDetectErrors 1.3.6.1.4.1.6247.25.1.6.2.2.6 counter32 read-only
The number of frames that encountered collision during reception. This is always zero.
                       cdd564EtherRxShortFrames 1.3.6.1.4.1.6247.25.1.6.2.2.7 counter32 read-only
The number of received frames that are shorter than the minimum frame length.
                       cdd564EtherRxFlowControlPauseFrames 1.3.6.1.4.1.6247.25.1.6.2.2.8 counter32 read-only
The number of flow control frames received by the device. This count includes both XOFF and XON frames received.
                   cdd564EthernetClearCounters 1.3.6.1.4.1.6247.25.1.6.2.3 integer read-write
Reset all ethernet transmit & receive counters. Enumeration: 'clear': 1.
               cdd564SatelliteStatistics 1.3.6.1.4.1.6247.25.1.6.3
                   cdd564SatelliteRxStatsTable 1.3.6.1.4.1.6247.25.1.6.3.1 no-access
The table for Satellite interface statistics.
                       cdd564SatelliteRxStatsEntry 1.3.6.1.4.1.6247.25.1.6.3.1.1 no-access
The entry for the Satellite interface statistics table.
                           cdd564RxStatsIndex 1.3.6.1.4.1.6247.25.1.6.3.1.1.1 integer read-only
The Rx index for the satellite interface, where index can be from 1 to 4.
                           cdd564RxGoodFrames 1.3.6.1.4.1.6247.25.1.6.3.1.1.2 counter32 read-only
The total number of good frames received over satellite interface.
                           cdd564RxHeaderBytes 1.3.6.1.4.1.6247.25.1.6.3.1.1.3 counter32 read-only
The count of HDLC header bytes received over the satellite interface. HDLC header = Control + HDLC address + Flow ID + CRC
                           cdd564RxPayloadBytes 1.3.6.1.4.1.6247.25.1.6.3.1.1.4 counter32 read-only
The count of payload bytes that were received over satellite interface, excluding any frame overhead.
                           cdd564RxBadHDLCAddressErrors 1.3.6.1.4.1.6247.25.1.6.3.1.1.5 counter32 read-only
The count of received frames that did not match any of the Rx HDLC addresses.
                           cdd564RxPktProcCRCErrors 1.3.6.1.4.1.6247.25.1.6.3.1.1.6 counter32 read-only
The Packet Processor CRC check is the second CRC check performed after the HDLC CRC check. It is the checksum calculated after Decryption and Payload Decompression. Failures due to 3xDES and Payload Comp are detected at this level.
                           cdd564RxAbortOctetErrors 1.3.6.1.4.1.6247.25.1.6.3.1.1.7 counter32 read-only
The count of aborted frames and octet error frames. Aborted frame: A frame is aborted when the frame is not complete and is terminated prematurely with the Abort signal, which is 8 consecutive '1's. Octet error: A frames that was not on a byte boudary or on a multiple of 8-bit boundary.
                           cdd564RxOverrunErrors 1.3.6.1.4.1.6247.25.1.6.3.1.1.8 counter32 read-only
The count of received frames that exceeded the maximum frame length of 2K bytes or overflowed the buffer which stores complete HDLC frames.
                           cdd564RxHDLCCRCErrors 1.3.6.1.4.1.6247.25.1.6.3.1.1.9 counter32 read-only
The HDLC CRC is the first stage of the CRC check, before 3xDES and paylod Decompression. It indicates any errors due to the satellite link only.
                           cdd564RxInvalidFlowIDErrors 1.3.6.1.4.1.6247.25.1.6.3.1.1.10 counter32 read-only
The number of frames received where the flow ID did not match to a valid flow descriptor.
                           cdd564RxSARReassembleErrors 1.3.6.1.4.1.6247.25.1.6.3.1.1.11 counter32 read-only
The number of frames corresponding to a packet which had undergone segmentation and encountered an error in reassembly.
                           cdd564RxHeaderDecompressionErrors 1.3.6.1.4.1.6247.25.1.6.3.1.1.12 counter32 read-only
The number of frames with a compressed IP header that encountered an error in decompressing (rebuilding) the full IP header.
                           cdd564RxMemoryAlignmentErrors 1.3.6.1.4.1.6247.25.1.6.3.1.1.13 counter32 read-only
The number of frames which were incorrectly transferred (frame too small) from the Rx FPGA.
                           cdd564RxCRCErrors 1.3.6.1.4.1.6247.25.1.6.3.1.1.14 counter32 read-only
The number of frames with a CRC error detected by the Rx FPGA.
                   cdd564SatelliteClearCounters 1.3.6.1.4.1.6247.25.1.6.3.2 integer read-write
This is a SET command for clearing all the Satellite statistic counters. Enumeration: 'clear': 1.
           cdd564Config 1.3.6.1.4.1.6247.25.1.7
               cdd564Rx 1.3.6.1.4.1.6247.25.1.7.1
                   cdd564RxTable 1.3.6.1.4.1.6247.25.1.7.1.1 no-access
The table of Demodulators.
                       cdd564RxEntry 1.3.6.1.4.1.6247.25.1.7.1.1.1 no-access
The entry for the Demodulator table.
                           cdd564RxTableIndex 1.3.6.1.4.1.6247.25.1.7.1.1.1.1 integer read-only
The index for the Rx table, where index can be from 1 to 4.
                           cdd564RxFEC 1.3.6.1.4.1.6247.25.1.7.1.1.1.2 integer read-write
Rx FEC type where: 0 = Uncoded 6 = Turbo Enumeration: 'uncoded': 0, 'turbo': 6.
                           cdd564RxDemodulation 1.3.6.1.4.1.6247.25.1.7.1.1.1.3 integer read-write
Rx demodulation type, where: 1 = QPSK 3 = 8-PSK 4 = 16-QAM Enumeration: 'demodQPSK': 1, 'demod8PSK': 3, 'demod16QAM': 4.
                           cdd564RxCodeRate 1.3.6.1.4.1.6247.25.1.7.1.1.1.4 integer read-write
Rx code rate, where 4 = Rate 3/4 5 = Rate 7/8 6 = Rate 0.95 7 = Rate 1/1 (Uncoded) Enumeration: 'uncoded': 7, 'rate7over8': 5, 'rate095': 6, 'rate3over4': 4.
                           cdd564RxDataRate 1.3.6.1.4.1.6247.25.1.7.1.1.1.5 integer read-write
Rx data rate in bps (Varies based on chart below.) Units = bps Resolution = 1 bps FEC Type Modulation Code Rate Data Rate High Rate -------- ----------- ---------- --------------------- --------- Turbo QPSK Rate 3/4 16.0 Kbps to 4.5 Mbps N/A Turbo QPSK Rate 7/8 16.0 Kbps to 5.0 Mbps 5.25 Mbps Turbo QPSK Rate 0.95 16.0 Kbps to 5.0 Mbps 5.667 Mbps Turbo 8-PSK Rate 3/4 16.0 Kbps to 5.0 Mbps 6.75 Mbps Turbo 8-PSK Rate 7/8 16.0 Kbps to 5.0 Mbps 7.875 Mbps Turbo 8-PSK Rate 0.95 16.0 Kbps to 5.0 Mbps 8.5 Mbps Turbo 16-QAM Rate 3/4 16.0 Kbps to 5.0 Mbps 9.0 Mbps Turbo 16-QAM Rate 7/8 16.8 Kbps to 5.0 Mbps 9.98 Mbps
                           cdd564RxFrequency 1.3.6.1.4.1.6247.25.1.7.1.1.1.6 integer read-write
Rx frequency for L-Band and IF-Band modes. L-Band is 950 MHz to 1950 MHz. IF-Band is 50 MHz to 90 MHz and 100 MHz to 180 MHz. Units = Hz. Resolution = 100 Hz.
                           cdd564RxAcquisitionSweepWidth 1.3.6.1.4.1.6247.25.1.7.1.1.1.7 integer read-write
Rx +/- acquisition sweep range of demodulator, in KHz, ranging from: +/- 1 to +/- 32 KHz (rates < 625 ksym/second) or +/- 1 to 200 KHz (rates >= 625 ksym/second)
                           cdd564RxDescrambling 1.3.6.1.4.1.6247.25.1.7.1.1.1.8 integer read-write
Rx descrambler state, where: 0 = Off 1 = On (default descrambler type) 2 = On - IESS-315 (Turbo only) Enumeration: 'off': 0, 'onIESS315': 2, 'onDefault': 1.
                           cdd564RxBufferSize 1.3.6.1.4.1.6247.25.1.7.1.1.1.9 integer read-write
Rx buffer size, where: 0 = Buffer disabled (Clock mode = Rx satellite) Enumeration: 'disabled': 0.
                           cdd546RxSpectrumInversion 1.3.6.1.4.1.6247.25.1.7.1.1.1.10 integer read-write
Rx spectrum inversion, where: 0 = Normal 1 = Rx spectrum inverted Enumeration: 'inverted': 1, 'normal': 0.
                           cdd564RxDataInversion 1.3.6.1.4.1.6247.25.1.7.1.1.1.11 integer read-write
Invert receive data, where: 0 = Normal 1 = Inverted Enumeration: 'inverted': 1, 'normal': 0.
                           cdd564RxEbNoAlarmPoint 1.3.6.1.4.1.6247.25.1.7.1.1.1.12 integer read-write
Rx Eb/No alarm point in 0.1 dB, with a range between 0.1 dB and 16 dB. Units = 0.1 dB Resolution = 0.1 dB
                           cdd564RxRecenterBuffer 1.3.6.1.4.1.6247.25.1.7.1.1.1.13 integer read-write
This is a SET command that recenters the receive Plesiochronous/Doppler buffer. Enumeration: 'recenter': 1.
                           cdd564RxSymbolRate 1.3.6.1.4.1.6247.25.1.7.1.1.1.14 integer read-only
Rx symbol rate in symbols per second (sym) Units = sym Resolution = 1 sym
               cdd564AlarmMask 1.3.6.1.4.1.6247.25.1.7.2
                   cdd564AlarmMaskTable 1.3.6.1.4.1.6247.25.1.7.2.1 no-access
Description.
                       cdd564AlarmMaskEntry 1.3.6.1.4.1.6247.25.1.7.2.1.1 no-access
Description.
                           cdd564AlarmMaskIndex 1.3.6.1.4.1.6247.25.1.7.2.1.1.1 integer read-only
The index for the Demodulator.
                           cdd564AGCAlarmMask 1.3.6.1.4.1.6247.25.1.7.2.1.1.2 integer read-write
Rx AGC alarm mask, where: 0 = Unmasked 1 = Masked Enumeration: 'active': 0, 'masked': 1.
                           cdd564EbNoAlarmMask 1.3.6.1.4.1.6247.25.1.7.2.1.1.3 integer read-write
Eb/No alarm mask, where: 0 = Unmasked 1 = Masked Enumeration: 'active': 0, 'masked': 1.
                           cdd564LNBAlarmMask 1.3.6.1.4.1.6247.25.1.7.2.1.1.5 integer read-write
LNB alarm mask, where: 0 = Unmasked 1 = Masked Enumeration: 'active': 0, 'masked': 1.
               cdd564Reference 1.3.6.1.4.1.6247.25.1.7.3
                   cdd564ReferenceFrequency 1.3.6.1.4.1.6247.25.1.7.3.1 integer read-write
External reference frequency, where: 0 = Internal 10 MHz Enumeration: 'int10MHz': 0.
                   cdd564InternalReferenceAdjust 1.3.6.1.4.1.6247.25.1.7.3.2 integer read-write
Internal Reference Adjust, from -999 to +999. Units = KHz
               cdd564LNB 1.3.6.1.4.1.6247.25.1.7.4
                   cdd564LNBTable 1.3.6.1.4.1.6247.25.1.7.4.1 no-access
The table for LNBs.
                       cdd564LNBEntry 1.3.6.1.4.1.6247.25.1.7.4.1.1 no-access
The entry for the LNBs table.
                           cdd564LNBIndex 1.3.6.1.4.1.6247.25.1.7.4.1.1.1 integer read-only
The index for the LNB..
                           cdd564LNBDCPower 1.3.6.1.4.1.6247.25.1.7.4.1.1.2 integer read-write
LNB power control, where: 0 = Off 1 = On, 13V LNB voltage 2 = On, 18V LNB voltage 3 = On, 24V LNB voltage Enumeration: 'on13volts': 1, 'off': 0, 'on18volts': 2, 'on24volts': 3.
                           cdd564LNB10MHzReference 1.3.6.1.4.1.6247.25.1.7.4.1.1.3 integer read-write
LNB 10MHz frequency reference, where: 0 = Disable LNB 10MHz reference 1 = Enable LNB 10MHz reference Enumeration: 'enable': 1, 'disable': 0.
                           cdm564LLNBLowCurrentLimit 1.3.6.1.4.1.6247.25.1.7.4.1.1.4 integer read-write
LNB lower alarm limit for current, between 10 and 400 mA.
                           cdd564LNBHighCurrentLimit 1.3.6.1.4.1.6247.25.1.7.4.1.1.5 integer read-write
LNB upper alarm limit for current, between 50 and 600 mA.
                           cdd564LNBLOFrequency 1.3.6.1.4.1.6247.25.1.7.4.1.1.6 integer read-write
LNB receieve LO frequency, in the range of 3000 to 65000 MHz. Setting a 0 disables the feature. Terminal Frequency = LNB_LO +/- Rx_Frequency (depending on High/Low Mix)
                           cdd564LNBLOMix 1.3.6.1.4.1.6247.25.1.7.4.1.1.7 integer read-write
LO frequency mix, where: 0 = Low-side mix 1 = High-side mix Enumeration: 'lowSideMix': 0, 'highSideMix': 1.
           cdd564Monitor 1.3.6.1.4.1.6247.25.1.8
               cdd564UnitMonitor 1.3.6.1.4.1.6247.25.1.8.1
                   cdd564SerialNumber 1.3.6.1.4.1.6247.25.1.8.1.1 displaystring read-only
Unit's 9-digit serial number.
                   cdd564SoftwareRevision 1.3.6.1.4.1.6247.25.1.8.1.2 displaystring read-only
Unit returns the value of the internal software revision installed in the unit, in the form of x.x.x.
                   cdd564ModelNumber 1.3.6.1.4.1.6247.25.1.8.1.3 integer read-only
Unit's model number.
                   cdd564UnitAlarm 1.3.6.1.4.1.6247.25.1.8.1.4 integer read-only
Modem Unit Faults: Value Description of unit fault 0 No faults 1 +5 Volt power supply 2 +12 Volt power supply 3 -5 Volt power supply 4 +23 Volt power supply 5 -12 Volt power supply 6 Rx 1st LO synthesize lock 7 Rx 2nd LO synthesize lock 8 Ref PLL lock 9 EEPROM checksum error Enumeration: 'rx1stLOSynthesizerLock': 6, 'rx2ndLOSynthesizerLock': 7, 'powerSupply5volts': 1, 'powerSupplyNeg12volts': 5, 'noFaults': 0, 'powerSupply12volts': 2, 'refPLLLock': 8, 'powerSupply23volts': 4, 'checksumErrorEEPROM': 9, 'powerSupplyNeg5volts': 3.
                   cdd564Temperature 1.3.6.1.4.1.6247.25.1.8.1.5 integer read-only
Unit returns the value of the internal temperature, in degrees Celsius.
               cdd564RxMonitor 1.3.6.1.4.1.6247.25.1.8.2
                   cdd564RxMonitorTable 1.3.6.1.4.1.6247.25.1.8.2.1 no-access
The table for monitoring demodulators.
                       cdd564RxMonitorEntry 1.3.6.1.4.1.6247.25.1.8.2.1.1 no-access
The entry for the demoduator monitor table.
                           cdd564RxMonitorIndex 1.3.6.1.4.1.6247.25.1.8.2.1.1.1 integer read-only
The index for the demodulator monitor table.
                           cdd564RxAlarm 1.3.6.1.4.1.6247.25.1.8.2.1.1.2 integer read-only
Modem RX Traffic Faults Value Description of status parameter 0 Rx Traffic OK 1 Demodulator unlocked 3 AGC Alarm - signal out of range 10 Buffer underflow 11 Buffer overflow 13 Eb/No alarm 15 AIS detected on incoming data Enumeration: 'demodulatorUnlocked': 1, 'ebNoAlarm': 13, 'rxTrafficOK': 0, 'aisDetectedOnIncomingData': 15, 'agcAlarmSignalOutOfRange': 3, 'bufferOverflow': 11, 'bufferUnderflow': 10.
                           cdd564RxEbNo 1.3.6.1.4.1.6247.25.1.8.2.1.1.3 integer read-only
Unit returns the value of Eb/No, between 0 and 16 db. Units = 0.1 dB Resolution 0.1 dB Returns 999 if demod is unlocked. For values greater than 16 dB, the reply will be 160.
                           cdd564RxSignalLevel 1.3.6.1.4.1.6247.25.1.8.2.1.1.4 integer read-only
Unit returns the value of the Rx signal level, in dBm, between -20 and -99 dBm, Returns -100 if signal is less than -99dBm. Returns -19 if signal is greater than -20dBm.
                           cdd564RxFreqOffset 1.3.6.1.4.1.6247.25.1.8.2.1.1.5 integer read-only
Unit returns the value of the measured frequency offset of the carrier being demodulated in Hz. Units = Hz. Resolution 100 Hz. Range = -200,000 Hz to 0 Hz and 0 Hz to 200,000 Hz.
                           cddRxBERMultiplier 1.3.6.1.4.1.6247.25.1.8.2.1.1.7 integer read-only
Estimated corrected BER. The BER is calculated by multiplying the Multiplier by 10E-10. Calculuation: RxBER = (Multiplier) * 0.0000000001 Returns 2147483647 (max int) if demod is unlocked.
               cdd564LNBMonitor 1.3.6.1.4.1.6247.25.1.8.3
                   cdd564LNBMonitorTable 1.3.6.1.4.1.6247.25.1.8.3.1 no-access
The table for monitoring LNBs.
                       cdd564LNBMonitorEntry 1.3.6.1.4.1.6247.25.1.8.3.1.1 no-access
The entry for the LNBs monitoring table.
                           cdd564LNBMonitorIndex 1.3.6.1.4.1.6247.25.1.8.3.1.1.1 integer read-only
The index for the LNBs monitoring table.
                           cdd564LNBAlarm 1.3.6.1.4.1.6247.25.1.8.3.1.1.2 integer read-only
LNB alarms Value Description of status parameter 0 No LNB faults 7 LNB current 9 LNB voltage Enumeration: 'lnbCurrent': 7, 'lnbVoltage': 9, 'noLNBfaults': 0.
                           cdd564LNBCurrent 1.3.6.1.4.1.6247.25.1.8.3.1.1.3 integer read-only
Indicates the value of the LNB current, between 0 and 999 mA.
                           cdd564LNBVoltage 1.3.6.1.4.1.6247.25.1.8.3.1.1.4 integer read-only
Indicates the value of the LNB voltage, between 0 and 30 volts. Units = 0.1 volts If not available, response is 0.
                           cdd564LNBTerminalRxFreq 1.3.6.1.4.1.6247.25.1.8.3.1.1.5 integer read-only
Terminal Rx frequency = LNB LO +/- Rx_Frequency (depending on LO mix) Units = 100 Hz Resolution = 100 Hz Returns 0 if LNB_LO is zero.
               cdd564StoredEvents 1.3.6.1.4.1.6247.25.1.8.4
                   cdd564StoredEventsTable 1.3.6.1.4.1.6247.25.1.8.4.1 no-access
The table of stored events for all four demods.
                       cdd564StoredEventsEntry 1.3.6.1.4.1.6247.25.1.8.4.1.1 no-access
The entry for stored events table for all 4 demods.
                           cdd564EventDemod 1.3.6.1.4.1.6247.25.1.8.4.1.1.1 integer read-only
The demodulator index for which event log is being returned.
                           cdd564EventIndex 1.3.6.1.4.1.6247.25.1.8.4.1.1.2 integer read-only
The index for a demod's stored events table.
                           cdd564EventDescription 1.3.6.1.4.1.6247.25.1.8.4.1.1.3 displaystring read-only
Event description string with the following format seprated by commas: 1. Date in form dd/mm/yy, where: dd = day of the month (01 to 31) mm = month (01 to 12) yy = year (00 to 99) 2. Time in form hh:mm:ss, where: hh = hours (00 to 23) mm = minutes (00 to 59) ss = seconds (00 to 59) 3. Event Type in form xxxxx, where xxxxx is Clear = fault cleared Fault = fault occurred Info = information 4. Texual Description of Event
                   cdd564ClearAllStoredEvents 1.3.6.1.4.1.6247.25.1.8.4.2 integer read-write
This is a SET command to clear the event log for one of the four demods (1 - 4).
               cdd564StoredStatistics 1.3.6.1.4.1.6247.25.1.8.5
                   cdd564StoredStatisticsTable 1.3.6.1.4.1.6247.25.1.8.5.1 no-access
The table of stored statistics for all four demods.
                       cdd564StoredStatisticsEntry 1.3.6.1.4.1.6247.25.1.8.5.1.1 no-access
The entry for stored statistics table for all four demods.
                           cdd564StatisticDemod 1.3.6.1.4.1.6247.25.1.8.5.1.1.1 integer read-only
The demod index for which statistics table is being returned.
                           cdd564StatisticIndex 1.3.6.1.4.1.6247.25.1.8.5.1.1.2 integer read-only
The index in one of the four demod's stored statistics table.
                           cdd564StatisticDate 1.3.6.1.4.1.6247.25.1.8.5.1.1.3 displaystring read-only
The date of the statistic in the form dd/mm/yy, where: dd = day of the month (01 to 31) mm = month (01 to 12) yy = year (00 to 99)
                           cdd564StatisticTime 1.3.6.1.4.1.6247.25.1.8.5.1.1.4 displaystring read-only
The time of the statistic in the form hh:mm:ss, indicating the time from midnight, where: hh = hours (00 to 23) mm = minutes (00 to 59) ss = seconds (00 to 59)
                           cdd564StatisticAvgEbNo 1.3.6.1.4.1.6247.25.1.8.5.1.1.5 integer read-only
Minimum Eb/No during sample period. Units = 0.1 dB. Returns 999 if demod was unlocked during sample period.
                           cdd564StatisticMinEbNo 1.3.6.1.4.1.6247.25.1.8.5.1.1.6 integer read-only
Minimum Eb/No during sample period. Units = 0.1 dB. Returns 999 if demod was unlocked during sample period.
                   cdd564StoredStatisticsConfigTable 1.3.6.1.4.1.6247.25.1.8.5.2 no-access
The configuration for the stored statistics (per Demod).
                       cdd564StoredStatisticsConfigEntry 1.3.6.1.4.1.6247.25.1.8.5.2.1 no-access
The entry for the stored statistics configuration table.
                           cdd564StoredStatisticsConfigIndex 1.3.6.1.4.1.6247.25.1.8.5.2.1.1 integer read-only
The index for the Demodulator.
                           cdd564StatisticsSampleInterval 1.3.6.1.4.1.6247.25.1.8.5.2.1.2 integer read-write
Used to set the sample interval for the statistics logging function, where the enumerated lists goes from 0 to 9 in 10 minute steps. Setting 0 disables the statistics logging function. Enumeration: 'mins70': 7, 'mins40': 4, 'mins50': 5, 'disabled': 0, 'mins10': 1, 'mins60': 6, 'mins80': 8, 'mins90': 9, 'mins20': 2, 'mins30': 3.
                   cdd564ClearAllStoredStatistics 1.3.6.1.4.1.6247.25.1.8.5.3 integer read-write
This is a SET command to clear the statistics log for one of the four demods (1 - 4).
           cdd564Util 1.3.6.1.4.1.6247.25.1.9
               cdd564RTCDate 1.3.6.1.4.1.6247.25.1.9.4 displaystring read-write
A date in the form dd/mm/yy, where dd = day of the month (01 to 31) mm = month (01 to 12) yy = year (00 to 99)
               cdd564RTCTime 1.3.6.1.4.1.6247.25.1.9.5 displaystring read-write
A time in the form hh:mm:ss, indicating the time from midnight, where: hh = hours (00 to 23) mm = minutes (00 to 59) ss = seconds (00 to 59)
               cdd564CircuitIDTable 1.3.6.1.4.1.6247.25.1.9.6 no-access
The table for Circuit IDs (Per Demod).
                   cdd564CircuitIDEntry 1.3.6.1.4.1.6247.25.1.9.6.1 no-access
The entry for the circuit ID table.
                       cdd564CircuitIDIndex 1.3.6.1.4.1.6247.25.1.9.6.1.1 integer read-only
The index for the Demodulator.
                       cdd564CircuitID 1.3.6.1.4.1.6247.25.1.9.6.1.2 displaystring read-write
Sets or queries the user-defined Circuit ID string, which is a fixed length of 24 characters. Valid characters include: Space ( ) * + - , . / 0 thru 9 and A thru Z.
       cdd564Notifications 1.3.6.1.4.1.6247.25.2
           cdd564NotificationsPrefix 1.3.6.1.4.1.6247.25.2.0
               cdd564UnitAlarmNotification 1.3.6.1.4.1.6247.25.2.0.1
Trap for Unit alarms.
               cdd564RxAlarmNotification 1.3.6.1.4.1.6247.25.2.0.2
Trap for Rx alarms.
               cdd564LNBAlarmNotification 1.3.6.1.4.1.6247.25.2.0.3
Trap for LNB alarms.
       cdd564Conformance 1.3.6.1.4.1.6247.25.3
           cdd564Groups 1.3.6.1.4.1.6247.25.3.1
               cdd564ObjectsGroup 1.3.6.1.4.1.6247.25.3.1.1
CDD-564 Objects Group.
               cdd564NotificationsGroup 1.3.6.1.4.1.6247.25.3.1.2
CDD-564 Trap Group.
           cdd564Compliances 1.3.6.1.4.1.6247.25.3.2
               cdd564Compliance 1.3.6.1.4.1.6247.25.3.2.1
CDD-564 Compliance.