BLADETYPE2-SWITCH-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: BLADETYPE2-SWITCH-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, HP-SWITCH-PL-MIB, BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 agent 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1
The MIB module for the general switch configuration and information .
     agentConfig 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1
         agSystem 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1
             agApplyConfiguration 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.2 integer read-write
This is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply are written to the new_config block. other(1) is returned when this object ie read. Enumeration: 'apply': 2, 'other': 1.
             agSavePending 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.3 integer read-only
This object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash. Enumeration: 'noSaveNeeded': 2, 'saveNeeded': 1.
             agSaveConfiguration 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.4 integer read-write
This is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to backup in flash and then the new configuration is saved to the active configuration in flash. When issued with notSaveActive, the active configuration is NOT saved to the flash and the active configuration is overwritten with the new configuration. ok(1) is returned always when read. Enumeration: 'notSaveActive': 3, 'ok': 1, 'saveActive': 2.
             agRevert 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.5 integer read-write
This is an action object to revert the unapplied changes made to the switch. By setting the value to revert(2), all the unapplied changes will be reverted. This action will copy the current_config to the new_config block. other(1) is returned when this object is read. Enumeration: 'other': 1, 'revert': 2.
             agRevertApply 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.6 integer read-write
This is an action object to revert the unsaved changes made to the switch. By setting the value to revertApply(2), all the unsaved as well as unapplied changes will be reverted. other(1) is returned when this object is read. Enumeration: 'revertApply': 2, 'other': 1.
             agReset 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.7 integer read-write
This is an action object to reboot the switch. other(1) is returned always when read. The following values are writable: coldReset(2)... warmReset(3)... Enumeration: 'warmReset': 3, 'other': 1, 'coldReset': 2.
             agConfigForNxtReset 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.8 integer read-write
The configuration information to be loaded from at next reset. The following values are writable: active(2)...active configuration block backup(3)...backup configuration block default(4)..default configuration block Enumeration: 'active': 2, 'default': 4, 'backup': 3.
             agImageForNxtReset 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.9 integer read-write
The software image to be booted from at next reset. The following values are writable: image1(2)...image 1 image2(3)...image 2 Enumeration: 'image2': 3, 'image1': 2.
             agSoftwareVersion 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.10 displaystring read-only
The version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if version is not available.
             agBootVer 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.11 displaystring read-only
The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available.
             agImage1Ver 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.12 displaystring read-only
The version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image.
             agImage2Ver 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.13 displaystring read-only
The version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image.
             agRtcDate 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.14 displaystring read-write
The date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available.
             agRtcTime 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.15 displaystring read-write
The time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if time is not available.
             agLastSetErrorReason 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.16 displaystring read-only
The error reason of the last SET failure.
             agCurCfgHttpServerPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.17 integer read-only
The TCP port number that the HTTP server is listening to in the current_configuration block.
             agNewCfgHttpServerPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.18 integer read-write
The TCP port number that the HTTP server is listening to in the new_configuration block.
             agCurCfgLoginBanner 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.19 displaystring read-only
The user defined login banner.
             agNewCfgLoginBanner 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.20 displaystring read-write
The user defined login banner.
             agCurCfgConsole 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.23 integer read-only
Enable or disable console output of syslog messages. Enumeration: 'disabled': 2, 'enabled': 1.
             agNewCfgConsole 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.24 integer read-write
Enable or disable console output of syslog messages. Enumeration: 'disabled': 2, 'enabled': 1.
             agCurCfgBootp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.29 integer read-only
Enable or disable the use of BootP, as currently configured in the current_configuration block. Enumeration: 'disabled': 3, 'enabled': 2.
             agNewCfgBootp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.30 integer read-write
Enable or disable the use of BootP, in the new_configuration block. Enumeration: 'disabled': 3, 'enabled': 2.
             agSlotNumber 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.31 integer read-only
Identifies the slot in which this switch is installed. If the agent implementing this MIB is not a blade in a chassis this value has no meaning.
             agCurCfgSnmpTimeout 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.32 integer read-only
Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user.
             agNewCfgSnmpTimeout 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.33 integer read-write
Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user.
             agCurCfgTelnetServerPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.34 integer read-only
The TCP port number that the telnet server listens for telnet sessions.
             agNewCfgTelnetServerPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.35 integer read-write
The TCP port number that the telnet server listens for telnet sessions.
             agClearFlashDump 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.36 integer read-write
This is an action object to clear the FLASH dump. ok(1) is returned when this object is read. Enumeration: 'clear': 2, 'ok': 1.
             agRackId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.37 displaystring read-only
The rack unique identifier.
             agChassis 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.38 displaystring read-only
Chassis serial number.
             agCurCfgTftpServerPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.39 integer read-only
The TCP port number that the TFTP server is listening to in the current_configuration block.
             agNewCfgTftpServerPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.40 integer read-write
The TCP port number that the TFTP server is listening to in the new_configuration block.
             agCurCfgHttpsServerPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.49 integer read-only
The TCP port number that the HTTPS server is listening to in the current_configuration block.
             agNewCfgHttpsServerPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.50 integer read-write
The TCP port number that the HTTPS server is listening to in the new_configuration block.
             agCurDaylightSavings 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.51 integer read-only
The daylight savings location. Enumeration: 'africa-Mali-SouthWestMali': 29, 'asia-Bhutan': 187, 'asia-Russia-Moscow04YeniseiRiver': 239, 'pacificOcean-USMinorOutlyingIslands-WakeIsland': 418, 'americas-Suriname': 142, 'americas-NetherlandsAntilles': 132, 'asia-Russia-Moscow-01Kaliningrad': 233, 'africa-Niger': 35, 'africa-Tunisia': 50, 'americas-Martinique': 122, 'americas-Antigua-Barbuda': 56, 'antarctica-DavisStationVestfoldHills': 175, 'americas-Mexico-CentTime-CampecheYucatan': 125, 'pacificOceanUSA-CentTime': 402, 'europe-Spain-CeutaAndMelilla': 338, 'pacificOcean-FrenchPolynesia-SocietyIslands': 365, 'americas-Per': 136, 'europe-Russia-Moscow01CaspianSea': 322, 'africa-Guinea-Bissa': 23, 'europe-Portugal-MadeiraIslands': 317, 'europe-Croatia': 293, 'asia-Jordan': 208, 'asia-Georgia': 197, 'asia-Tajikistan': 252, 'americas-Anguilla': 55, 'pacificOceanUSA-AlaskaTime-AlaskaPanhandleNeck': 412, 'australia-WesternAustralia': 283, 'europe-Romania': 319, 'indianOcean-Reunion': 358, 'australia-Victoria': 276, 'americas-Panama': 134, 'asia-Philippines': 231, 'europe-Russia-Moscow00WestRussia': 321, 'americas-Brazil-Acre': 79, 'pacificOcean-Kiribati-PhoenixIslands': 370, 'americas-Venezuela': 168, 'arcticOcean-JanMayen': 181, 'africa-Zimbabwe': 54, 'asia-Iraq': 205, 'asia-Iran': 204, 'asia-Uzbekistan-EastUzbekistan': 257, 'asia-Mongolia-MostLocations': 223, 'africa-Somalia': 41, 'asia-Russia-Moscow02Urals': 236, 'atlanticOcean-Bermuda': 260, 'asia-Mongolia-DornodSukhbaatar': 225, 'africa-Namibia': 34, 'americas-Brazil-SSEBrazil': 73, 'indianOcean-Mauritius': 356, 'pacificOcean-Guam': 368, 'indianOcean-ChristmasIsland': 350, 'europe-Greece': 301, 'americas-USA-EastTime-KentuckyLouisvilleArea': 147, 'asia-China-CentralChinaGansuGuizhouSichuanYunnan': 192, 'americas-Canada-AtlanTime-ELabrador': 82, 'europe-Luxembourg': 308, 'europe-VaticanCity': 347, 'pacificOceanUSA-AleutianIslands': 414, 'africa-Tanzania': 48, 'americas-Canada-CenTime-ManitobaWestOntario': 88, 'americas-USA-CentTime': 153, 'pacificOceanUSA-CentTime-MichiganWisconsinborder': 403, 'europe-Malta': 310, 'asia-Afghanistan': 182, 'europe-Russia-Moscow04YeniseiRiver': 326, 'atlanticOcean-Spain-CanaryIslands': 271, 'asia-Russia-Moscow06LenaRiver': 241, 'africa-Morocco': 32, 'pacificOcean-Micronesia-PonapeOrPohnpei': 376, 'europe-Gibraltar': 300, 'americas-StPierreAndMiquelon': 140, 'none': 0, 'australia-NorthernTerritory': 282, 'australia-NewSouthWales-Yancowinna': 278, 'europe-Russia-Moscow06LenaRiver': 328, 'asia-SaudiArabia': 247, 'africa-Spain-CanaryIslands': 45, 'europe-Ukraine-Zaporozhye-ELugansk': 345, 'americas-Chile-MostLocation': 101, 'americas-Mexico-CentTime-QuintanaRoo': 124, 'europe-Estonia': 296, 'africa-Burkina-Faso': 5, 'pacificOcean-Tokela': 391, 'pacificOcean-PapuaNewGuinea': 386, 'asia-Armenia': 183, 'americas-USA-EastStdTime-IndianaCrawfordCounty': 150, 'indianOcean-Seychelles': 359, 'pacificOcean-Niue': 382, 'europe-Moldova': 311, 'americas-Canada-CenTime-RainyRiver': 89, 'indianOcean-FrenchSouthernAndAntarcticLands': 353, 'pacificOcean-USMinorOutlyingIslands-JohnstonAtoll': 416, 'africa-SaoTome-And-Principe': 38, 'asia-Kazakhstan-AtyrauMangghysta': 212, 'asia-Korea-South': 215, 'asia-Kuwait': 216, 'pacificOcean-FrenchPolynesia-GambierIslands': 367, 'americas-Jamaica': 121, 'europe-Netherlands': 313, 'africa-Kenya': 24, 'africa-Djibouti': 14, 'americas-StKittsAndNevis': 138, 'americas-TrinidadAndTobago': 143, 'americas-Brazil-WParaRondonia': 75, 'atlanticOcean-FaeroeIslands': 262, 'atlanticOcean-StHelena': 272, 'australia-Tasmania': 275, 'americas-Canada-NewfoundlandIsland': 80, 'africa-Senegal': 39, 'americas-Brazil-AlagoasSergipe': 72, 'europe-Spain-Mainland': 337, 'pacificOcean-NorfolkIsland': 383, 'americas-Canada-EastStdTime-EastNunavut': 86, 'americas-Canada-EastTime-OntarioMostlocation': 83, 'europe-Belgium': 288, 'americas-USA-AleutianIslands': 165, 'europe-Andorra': 285, 'indianOcean-CocosOrKeelingIslands': 351, 'europe-Albania': 284, 'africa-Botswana': 4, 'europe-Portugal-Azores': 318, 'atlanticOcean-Portugal-MadeiraIslands': 266, 'americas-USA-AlaskaTime-AlaskaPanhandleNeck': 163, 'europe-Russia-Moscow03Novosibirsk': 325, 'africa-Equatorial-Guinea': 16, 'pacificOceanUSA-AlaskaTime': 410, 'asia-China-SouthwestXinjiangUyghur': 194, 'asia-Russia-Moscow07SakhalinIsland': 243, 'africa-Mozambique': 33, 'europe-France': 298, 'americas-Bolivia': 66, 'americas-Montserrat': 131, 'americas-Brazil-NEBrazil': 69, 'pacificOceanUSA-EastTime-KentuckyLouisvilleArea': 396, 'indianOcean-Madagascar': 354, 'asia-India': 199, 'pacificOcean-Kiribati-GilbertIslands': 369, 'africa-Congo-Rep': 12, 'pacificOcean-Kiribati-LineIslands': 371, 'africa-Lesotho': 25, 'americas-USA-CentTime-NorthDakotaOliverCounty': 155, 'asia-Israel': 206, 'europe-Switzerland': 341, 'europe-Ukraine-MostLocations': 343, 'americas-Mexico-MountStdTime-Sonora': 129, 'asia-Russia-Moscow03Novosibirsk': 238, 'africa-Libya': 27, 'africa-Spain-CeutaMelilla': 44, 'asia-Yemen': 259, 'pacificOceanUSA-EastStdTime-IndianaSwitzerlandCounty': 401, 'americas-StVincent': 141, 'pacificOcean-Vanuat': 419, 'americas-Canada-MountTime-WestNorthwestTerritories': 95, 'pacificOceanUSA-PacificTime': 409, 'americas-Canada-EastTime-ThunderBay': 84, 'australia-LordHoweIsland': 274, 'atlanticOcean-Portugal-Azores': 267, 'africa-Zambia': 53, 'asia-Indonesia-WestCentralBorneo': 201, 'pacificOcean-Micronesia-Yap': 374, 'asia-Russia-Moscow01CaspianSea': 235, 'americas-Argentina-Mendoza': 61, 'asia-Syria': 250, 'asia-Thailand': 253, 'americas-Canada-CenStdTime-SaskatchewanMidwest': 92, 'americas-Guyana': 118, 'europe-Russia-Moscow09Kamchatka': 332, 'asia-Russia-Moscow10BeringSea': 246, 'africa-Mali-NorthEastMali': 30, 'americas-USA-EastStdTime-IndianaMostLocations': 149, 'americas-USA-EastTime': 145, 'pacificOcean-Ecuador': 363, 'americas-Honduras': 120, 'americas-Greenland-EastCoastNorthScoresbysund': 112, 'asia-Uzbekistan-WestUzbekistan': 256, 'africa-Malawi': 28, 'americas-Brazil-WAmazonas': 78, 'europe-Slovenia': 336, 'africa-Spain-Mainland': 43, 'americas-Brazil-AmapaEPara': 68, 'americas-Canada-PacificTime-WestBritishColumbia': 97, 'asia-Kazakhstan-WestKazakhstan': 213, 'europe-CzechRepublic': 294, 'asia-Russia-Moscow07AmurRiver': 242, 'asia-Brunei': 188, 'pacificOcean-NewZealand-MostLocations': 380, 'asia-Cyprus': 195, 'asia-Kyrgyzstan': 217, 'americas-Guatemala': 117, 'americas-USA-AlaskaTime-AlaskaPanhandle': 162, 'europe-Denmark': 295, 'europe-Spain-CanaryIslands': 339, 'europe-Poland': 315, 'africa-Egypt': 15, 'pacificOcean-SolomonIslands': 390, 'pacificOceanUSA-EastStdTime-IndianaMostLocations': 398, 'americas-USA-MountStdTime-Arizona': 159, 'antarctica-McMurdoStationRossIsland': 171, 'americas-Canada-PacificTime-SouthYukon': 98, 'antarctica-SyowaStationEOngulI': 179, 'americas-Mexico-CentTime-CoahuilaDurangoNuevoLeonTamaulipas': 126, 'americas-Bahamas': 63, 'pacificOceanUSA-EastTime-KentuckyWayneCounty': 397, 'asia-Myanmar': 226, 'americas-Greenland-MostLocation': 111, 'americas-Mexico-MountTime-Chihuahua': 128, 'americas-VirginIslands-UK': 169, 'pacificOcean-Chile-EasterIslandSalayGomez': 361, 'americas-USA-EastStdTime-IndianaSwitzerlandCounty': 152, 'americas-USA-EastTime-MichiganMostLocation': 146, 'pacificOcean-MarshallIslands-Kwajalein': 373, 'africa-Chad': 9, 'americas-VirginIslands-US': 170, 'asia-Azerbaijan': 184, 'africa-Gabon': 19, 'antarctica-PalmerStationAnversIsland': 173, 'arcticOcean-Svalbard': 180, 'asia-Russia-Moscow09Kamchatka': 245, 'asia-Maca': 220, 'africa-SouthAfrica': 42, 'asia-Bahrain': 185, 'americas-Dominica': 106, 'australia-SouthAustralia': 281, 'americas-Aruba': 62, 'africa-Cote-dIvoire': 13, 'asia-China-Heilongjiang': 191, 'africa-Central-African-Rep': 8, 'pacificOcean-Chile-MostLocations': 360, 'antarctica-Amundsen-ScottStationSouthPole': 172, 'americas-Uruguay': 167, 'europe-Russia-Moscow02Urals': 323, 'europe-Ireland': 303, 'pacificOcean-FrenchPolynesia-MarquesasIslands': 366, 'pacificOcean-Pitcairn': 387, 'europe-Britain-UKGreatBritain': 290, 'americas-Mexico-CentTime-Mostlocations': 123, 'americas-Brazil-Tocantins': 71, 'asia-China-EastChinaBeijingGuangdongShanghai': 190, 'antarctica-MawsonStationHolmeBay': 174, 'atlanticOcean-Svalbard-JanMayen': 273, 'asia-Nepal': 227, 'africa-Angola': 2, 'asia-Palestine': 230, 'indianOcean-Mayotte': 357, 'africa-Burundi': 6, 'pacificOceanUSA-MountTime-SouthIdahoAndEastOregon': 406, 'asia-UnitedArabEmirates': 255, 'asia-Oman': 228, 'pacificOceanUSA-AlaskaTime-AlaskaPanhandle': 411, 'asia-China-TibetmostofXinjiangUyghur': 193, 'europe-SanMarino': 334, 'europe-Belarus': 287, 'europe-Slovakia': 335, 'pacificOcean-WallisAndFutuna': 420, 'americas-Brazil-EAmazonas': 77, 'europe-Ukraine-Ruthenia': 344, 'americas-Colombia': 103, 'asia-Kazakhstan-QyzylordaKyzylorda': 210, 'asia-Russia-Moscow03WestSiberia': 237, 'africa-Sudan': 46, 'europe-Turkey': 342, 'pacificOcean-NewCaledonia': 379, 'africa-Togo': 49, 'europe-Latvia': 305, 'europe-Liechtenstein': 306, 'europe-Austria': 286, 'africa-Ethiopia': 18, 'americas-DominicanRepublic': 107, 'asia-Russia-Moscow05LakeBaikal': 240, 'asia-Indonesia-IrianJayaAndMoluccas': 203, 'americas-Grenada': 115, 'americas-USA-EastTime-KentuckyWayneCounty': 148, 'atlanticOcean-CapeVerde': 261, 'americas-FrenchGuiana': 110, 'africa-Algeria': 1, 'americas-USA-MountTime-SouthIdahoAndEastOregon': 157, 'pacificOcean-Fiji': 364, 'asia-Taiwan': 251, 'europe-Monaco': 312, 'pacificOceanUSA-AlaskaTime-WestAlaska': 413, 'europe-BosniaHerzegovina': 289, 'europe-Macedonia': 309, 'americas-Nicaragua': 133, 'americas-Argentina-Jujuy': 59, 'americas-USA-Hawaii': 166, 'africa-Liberia': 26, 'atlanticOcean-FalklandIslands': 263, 'americas-Canada-CenStdTime-SaskatchewanMostlocation': 91, 'pacificOceanUSA-MountTime': 405, 'africa-Uganda': 51, 'asia-Japan': 207, 'africa-Swaziland': 47, 'americas-Brazil-Pernambuco': 70, 'antarctica-CaseyStationBaileyPeninsula': 176, 'asia-Vietnam': 258, 'africa-SierraLeone': 40, 'americas-Canada-EastStdTime-CenNunavut': 87, 'australia-NewSouthWales-MostLocations': 277, 'pacificOceanUSA-EastStdTime-IndianaStarkeCounty': 400, 'americas-CaymanIslands': 100, 'asia-Pakistan': 229, 'pacificOcean-USMinorOutlyingIslands-MidwayIslands': 417, 'asia-Kazakhstan-MostLocations': 209, 'africa-Mauritania': 31, 'europe-Britain-UKNorthernIreland': 291, 'africa-Nigeria': 36, 'pacificOceanUSA-MountTime-Navajo': 407, 'americas-CostaRica': 104, 'asia-Lebanon': 219, 'americas-Canada-AtlanTime-NovaScotia': 81, 'australia-Queensland-MostLocations': 279, 'europe-Russia-Moscow-01Kaliningrad': 320, 'africa-Western-Sahara': 52, 'pacificOcean-Tuval': 393, 'americas-USA-AlaskaTime': 161, 'atlanticOcean-Iceland': 264, 'asia-Korea-North': 214, 'americas-Brazil-MatoGrossoDoSul': 74, 'africa-Guinea': 22, 'asia-Kazakhstan-Aqtobe': 211, 'pacificOcean-SamoaWestern': 389, 'europe-Russia-Moscow03WestSiberia': 324, 'pacificOceanUSA-EastTime-MichiganMostLocations': 395, 'pacificOcean-CookIslands': 362, 'atlanticOcean-Spain-CeutaMelilla': 270, 'atlanticOcean-SouthGeorgia-SouthSandwichIslands': 268, 'americas-PuertoRico': 137, 'asia-Malaysia-PeninsularMalaysia': 221, 'pacificOcean-MarshallIslands-MostLocations': 372, 'asia-Indonesia-JavaAndSumatra': 200, 'pacificOceanUSA-MountStdTime-Arizona': 408, 'americas-Greenland-ThulePituffik': 114, 'asia-Mongolia-BayanOlgiyGoviAltaiHovdUvsZavkhan': 224, 'americas-Belize': 65, 'asia-SriLanka': 249, 'americas-USA-MountTime-Navajo': 158, 'americas-Canada-EastStdTime-PangnirtungNunavut': 85, 'antarctica-Dumont-dUrvilleBaseTerreAdelie': 178, 'pacificOceanUSA-EastStdTime-IndianaCrawfordCounty': 399, 'asia-Cambodia': 189, 'americas-Haiti': 119, 'americas-Canada-PacificTime-NorthYukon': 99, 'europe-Portugal-Mainland': 316, 'indianOcean-Comoros': 352, 'asia-Qatar': 232, 'americas-Barbados': 64, 'americas-Cuba': 105, 'americas-ElSalvado': 109, 'americas-USA-CentTime-MichiganWisconsinborder': 154, 'atlanticOcean-Spain-Mainland': 269, 'africa-Ghana': 21, 'africa-Congo-EastDemRepCongo': 11, 'africa-Congo-WestDemRepCongo': 10, 'americas-Canada-MountTime-CentralNorthwestTerritories': 94, 'africa-Benin': 3, 'americas-USA-PacificTime': 160, 'americas-Brazil-Roraima': 76, 'europe-Hungary': 302, 'pacificOceanUSA-Hawaii': 415, 'americas-Argentina-MostLocations': 58, 'pacificOcean-Tonga': 392, 'americas-StLucia': 139, 'antarctica-VostokStationSMagneticPole': 177, 'americas-TurksAndCaicosIs': 144, 'indianOcean-BritishIndianOceanTerritory': 349, 'europe-Russia-Moscow07AmurRiver': 329, 'americas-Mexico-PacificTime': 130, 'europe-Lithuania': 307, 'indianOcean-Maldives': 355, 'asia-Malaysia-SabahSarawak': 222, 'americas-Guadeloupe': 116, 'americas-Canada-MountTime-AlbertaEastBritishColumbia': 93, 'americas-Ecuador': 108, 'americas-Canada-CenTime-WestNunavut': 90, 'pacificOcean-Pala': 385, 'europe-Finland': 297, 'africa-Eritrea': 17, 'americas-Argentina-EArgentina': 57, 'pacificOcean-Micronesia-TrukOrChuuk': 375, 'americas-USA-MountTime': 156, 'europe-Russia-Moscow07SakhalinIsland': 330, 'pacificOceanUSA-EastTime': 394, 'europe-Yugoslavia': 348, 'atlanticOcean-Portugal-Mainland': 265, 'americas-Argentina-Catamarca': 60, 'americas-Greenland-ScoresbysundIttoqqortoormiit': 113, 'americas-Chile-EasterIsland': 102, 'europe-Russia-Moscow05LakeBaikal': 327, 'pacificOcean-SamoaAmerican': 388, 'pacificOceanUSA-CentTime-NorthDakotaOliverCounty': 404, 'asia-Bangladesh': 186, 'asia-Russia-Moscow00WestRussia': 234, 'europe-Italy': 304, 'asia-Laos': 218, 'pacificOcean-NorthernMarianaIslands': 384, 'asia-HongKong': 198, 'pacificOcean-Micronesia-Kosrae': 377, 'asia-Indonesia-EastSouthBorneoCelebesBaliNusaTengarraWestTimor': 202, 'europe-Sweden': 340, 'pacificOcean-Naur': 378, 'europe-Germany': 299, 'asia-Singapore': 248, 'americas-USA-AlaskaTime-WestAlaska': 164, 'asia-EastTimor': 196, 'europe-Norway': 314, 'americas-Paraguay': 135, 'pacificOcean-NewZealand-ChathamIslands': 381, 'asia-Russia-Moscow08Magadan': 244, 'americas-Mexico-MountTime-SBajaNayaritSinaloa': 127, 'africa-Gambia': 20, 'europe-Russia-Moscow08Magadan': 331, 'australia-Queensland-HolidayIslands': 280, 'africa-Cameroon': 7, 'europe-Ukraine-CentralCrimea': 346, 'europe-Bulgaria': 292, 'europe-Russia-Moscow10BeringSea': 333, 'americas-USA-EastStdTime-IndianaStarkeCounty': 151, 'asia-Turkmenistan': 254, 'americas-Brazil-AtlanticIslands': 67, 'africa-Rwanda': 37, 'americas-Canada-MountStdTime-DawsonCreekFortSaintJohnBritishColumbia': 96.
             agNewDaylightSavings 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.52 integer read-write
The daylight savings location. Enumeration: 'africa-Mali-SouthWestMali': 29, 'asia-Bhutan': 187, 'asia-Russia-Moscow04YeniseiRiver': 239, 'pacificOcean-USMinorOutlyingIslands-WakeIsland': 418, 'americas-Suriname': 142, 'americas-NetherlandsAntilles': 132, 'asia-Russia-Moscow-01Kaliningrad': 233, 'africa-Niger': 35, 'africa-Tunisia': 50, 'americas-Martinique': 122, 'americas-Antigua-Barbuda': 56, 'antarctica-DavisStationVestfoldHills': 175, 'americas-Mexico-CentTime-CampecheYucatan': 125, 'pacificOceanUSA-CentTime': 402, 'europe-Spain-CeutaAndMelilla': 338, 'pacificOcean-FrenchPolynesia-SocietyIslands': 365, 'americas-Per': 136, 'europe-Russia-Moscow01CaspianSea': 322, 'africa-Guinea-Bissa': 23, 'europe-Portugal-MadeiraIslands': 317, 'europe-Croatia': 293, 'asia-Jordan': 208, 'asia-Georgia': 197, 'asia-Tajikistan': 252, 'americas-Anguilla': 55, 'pacificOceanUSA-AlaskaTime-AlaskaPanhandleNeck': 412, 'australia-WesternAustralia': 283, 'europe-Romania': 319, 'indianOcean-Reunion': 358, 'australia-Victoria': 276, 'americas-Panama': 134, 'asia-Philippines': 231, 'europe-Russia-Moscow00WestRussia': 321, 'americas-Brazil-Acre': 79, 'pacificOcean-Kiribati-PhoenixIslands': 370, 'americas-Venezuela': 168, 'arcticOcean-JanMayen': 181, 'africa-Zimbabwe': 54, 'asia-Iraq': 205, 'asia-Iran': 204, 'asia-Uzbekistan-EastUzbekistan': 257, 'asia-Mongolia-MostLocations': 223, 'africa-Somalia': 41, 'asia-Russia-Moscow02Urals': 236, 'atlanticOcean-Bermuda': 260, 'asia-Mongolia-DornodSukhbaatar': 225, 'africa-Namibia': 34, 'americas-Brazil-SSEBrazil': 73, 'indianOcean-Mauritius': 356, 'pacificOcean-Guam': 368, 'indianOcean-ChristmasIsland': 350, 'europe-Greece': 301, 'americas-USA-EastTime-KentuckyLouisvilleArea': 147, 'asia-China-CentralChinaGansuGuizhouSichuanYunnan': 192, 'americas-Canada-AtlanTime-ELabrador': 82, 'europe-Luxembourg': 308, 'europe-VaticanCity': 347, 'pacificOceanUSA-AleutianIslands': 414, 'africa-Tanzania': 48, 'americas-Canada-CenTime-ManitobaWestOntario': 88, 'americas-USA-CentTime': 153, 'pacificOceanUSA-CentTime-MichiganWisconsinborder': 403, 'europe-Malta': 310, 'asia-Afghanistan': 182, 'europe-Russia-Moscow04YeniseiRiver': 326, 'atlanticOcean-Spain-CanaryIslands': 271, 'asia-Russia-Moscow06LenaRiver': 241, 'africa-Morocco': 32, 'pacificOcean-Micronesia-PonapeOrPohnpei': 376, 'europe-Gibraltar': 300, 'americas-StPierreAndMiquelon': 140, 'none': 0, 'australia-NorthernTerritory': 282, 'australia-NewSouthWales-Yancowinna': 278, 'europe-Russia-Moscow06LenaRiver': 328, 'asia-SaudiArabia': 247, 'africa-Spain-CanaryIslands': 45, 'europe-Ukraine-Zaporozhye-ELugansk': 345, 'americas-Chile-MostLocation': 101, 'americas-Mexico-CentTime-QuintanaRoo': 124, 'europe-Estonia': 296, 'africa-Burkina-Faso': 5, 'pacificOcean-Tokela': 391, 'pacificOcean-PapuaNewGuinea': 386, 'asia-Armenia': 183, 'americas-USA-EastStdTime-IndianaCrawfordCounty': 150, 'indianOcean-Seychelles': 359, 'pacificOcean-Niue': 382, 'europe-Moldova': 311, 'americas-Canada-CenTime-RainyRiver': 89, 'indianOcean-FrenchSouthernAndAntarcticLands': 353, 'pacificOcean-USMinorOutlyingIslands-JohnstonAtoll': 416, 'africa-SaoTome-And-Principe': 38, 'asia-Kazakhstan-AtyrauMangghysta': 212, 'asia-Korea-South': 215, 'asia-Kuwait': 216, 'pacificOcean-FrenchPolynesia-GambierIslands': 367, 'americas-Jamaica': 121, 'europe-Netherlands': 313, 'africa-Kenya': 24, 'africa-Djibouti': 14, 'americas-StKittsAndNevis': 138, 'americas-TrinidadAndTobago': 143, 'americas-Brazil-WParaRondonia': 75, 'atlanticOcean-FaeroeIslands': 262, 'atlanticOcean-StHelena': 272, 'australia-Tasmania': 275, 'americas-Canada-NewfoundlandIsland': 80, 'africa-Senegal': 39, 'americas-Brazil-AlagoasSergipe': 72, 'europe-Spain-Mainland': 337, 'pacificOcean-NorfolkIsland': 383, 'americas-Canada-EastStdTime-EastNunavut': 86, 'americas-Canada-EastTime-OntarioMostlocation': 83, 'europe-Belgium': 288, 'americas-USA-AleutianIslands': 165, 'europe-Andorra': 285, 'indianOcean-CocosOrKeelingIslands': 351, 'europe-Albania': 284, 'africa-Botswana': 4, 'europe-Portugal-Azores': 318, 'atlanticOcean-Portugal-MadeiraIslands': 266, 'americas-USA-AlaskaTime-AlaskaPanhandleNeck': 163, 'europe-Russia-Moscow03Novosibirsk': 325, 'africa-Equatorial-Guinea': 16, 'pacificOceanUSA-AlaskaTime': 410, 'asia-China-SouthwestXinjiangUyghur': 194, 'asia-Russia-Moscow07SakhalinIsland': 243, 'africa-Mozambique': 33, 'europe-France': 298, 'americas-Bolivia': 66, 'americas-Montserrat': 131, 'americas-Brazil-NEBrazil': 69, 'pacificOceanUSA-EastTime-KentuckyLouisvilleArea': 396, 'indianOcean-Madagascar': 354, 'asia-India': 199, 'pacificOcean-Kiribati-GilbertIslands': 369, 'africa-Congo-Rep': 12, 'pacificOcean-Kiribati-LineIslands': 371, 'africa-Lesotho': 25, 'americas-USA-CentTime-NorthDakotaOliverCounty': 155, 'asia-Israel': 206, 'europe-Switzerland': 341, 'europe-Ukraine-MostLocations': 343, 'americas-Mexico-MountStdTime-Sonora': 129, 'asia-Russia-Moscow03Novosibirsk': 238, 'africa-Libya': 27, 'africa-Spain-CeutaMelilla': 44, 'asia-Yemen': 259, 'pacificOceanUSA-EastStdTime-IndianaSwitzerlandCounty': 401, 'americas-StVincent': 141, 'pacificOcean-Vanuat': 419, 'americas-Canada-MountTime-WestNorthwestTerritories': 95, 'pacificOceanUSA-PacificTime': 409, 'americas-Canada-EastTime-ThunderBay': 84, 'australia-LordHoweIsland': 274, 'atlanticOcean-Portugal-Azores': 267, 'africa-Zambia': 53, 'asia-Indonesia-WestCentralBorneo': 201, 'pacificOcean-Micronesia-Yap': 374, 'asia-Russia-Moscow01CaspianSea': 235, 'americas-Argentina-Mendoza': 61, 'asia-Syria': 250, 'asia-Thailand': 253, 'americas-Canada-CenStdTime-SaskatchewanMidwest': 92, 'americas-Guyana': 118, 'europe-Russia-Moscow09Kamchatka': 332, 'asia-Russia-Moscow10BeringSea': 246, 'africa-Mali-NorthEastMali': 30, 'americas-USA-EastStdTime-IndianaMostLocations': 149, 'americas-USA-EastTime': 145, 'pacificOcean-Ecuador': 363, 'americas-Honduras': 120, 'americas-Greenland-EastCoastNorthScoresbysund': 112, 'asia-Uzbekistan-WestUzbekistan': 256, 'africa-Malawi': 28, 'americas-Brazil-WAmazonas': 78, 'europe-Slovenia': 336, 'africa-Spain-Mainland': 43, 'americas-Brazil-AmapaEPara': 68, 'americas-Canada-PacificTime-WestBritishColumbia': 97, 'asia-Kazakhstan-WestKazakhstan': 213, 'europe-CzechRepublic': 294, 'asia-Russia-Moscow07AmurRiver': 242, 'asia-Brunei': 188, 'pacificOcean-NewZealand-MostLocations': 380, 'asia-Cyprus': 195, 'asia-Kyrgyzstan': 217, 'americas-Guatemala': 117, 'americas-USA-AlaskaTime-AlaskaPanhandle': 162, 'europe-Denmark': 295, 'europe-Spain-CanaryIslands': 339, 'europe-Poland': 315, 'africa-Egypt': 15, 'pacificOcean-SolomonIslands': 390, 'pacificOceanUSA-EastStdTime-IndianaMostLocations': 398, 'americas-USA-MountStdTime-Arizona': 159, 'antarctica-McMurdoStationRossIsland': 171, 'americas-Canada-PacificTime-SouthYukon': 98, 'antarctica-SyowaStationEOngulI': 179, 'americas-Mexico-CentTime-CoahuilaDurangoNuevoLeonTamaulipas': 126, 'americas-Bahamas': 63, 'pacificOceanUSA-EastTime-KentuckyWayneCounty': 397, 'asia-Myanmar': 226, 'americas-Greenland-MostLocation': 111, 'americas-Mexico-MountTime-Chihuahua': 128, 'americas-VirginIslands-UK': 169, 'pacificOcean-Chile-EasterIslandSalayGomez': 361, 'americas-USA-EastStdTime-IndianaSwitzerlandCounty': 152, 'americas-USA-EastTime-MichiganMostLocation': 146, 'pacificOcean-MarshallIslands-Kwajalein': 373, 'africa-Chad': 9, 'americas-VirginIslands-US': 170, 'asia-Azerbaijan': 184, 'africa-Gabon': 19, 'antarctica-PalmerStationAnversIsland': 173, 'arcticOcean-Svalbard': 180, 'asia-Russia-Moscow09Kamchatka': 245, 'asia-Maca': 220, 'africa-SouthAfrica': 42, 'asia-Bahrain': 185, 'americas-Dominica': 106, 'australia-SouthAustralia': 281, 'americas-Aruba': 62, 'africa-Cote-dIvoire': 13, 'asia-China-Heilongjiang': 191, 'africa-Central-African-Rep': 8, 'pacificOcean-Chile-MostLocations': 360, 'antarctica-Amundsen-ScottStationSouthPole': 172, 'americas-Uruguay': 167, 'europe-Russia-Moscow02Urals': 323, 'europe-Ireland': 303, 'pacificOcean-FrenchPolynesia-MarquesasIslands': 366, 'pacificOcean-Pitcairn': 387, 'europe-Britain-UKGreatBritain': 290, 'americas-Mexico-CentTime-Mostlocations': 123, 'americas-Brazil-Tocantins': 71, 'asia-China-EastChinaBeijingGuangdongShanghai': 190, 'antarctica-MawsonStationHolmeBay': 174, 'atlanticOcean-Svalbard-JanMayen': 273, 'asia-Nepal': 227, 'africa-Angola': 2, 'asia-Palestine': 230, 'indianOcean-Mayotte': 357, 'africa-Burundi': 6, 'pacificOceanUSA-MountTime-SouthIdahoAndEastOregon': 406, 'asia-UnitedArabEmirates': 255, 'asia-Oman': 228, 'pacificOceanUSA-AlaskaTime-AlaskaPanhandle': 411, 'asia-China-TibetmostofXinjiangUyghur': 193, 'europe-SanMarino': 334, 'europe-Belarus': 287, 'europe-Slovakia': 335, 'americas-Brazil-EAmazonas': 77, 'europe-Ukraine-Ruthenia': 344, 'americas-Colombia': 103, 'asia-Kazakhstan-QyzylordaKyzylorda': 210, 'asia-Russia-Moscow03WestSiberia': 237, 'africa-Sudan': 46, 'europe-Turkey': 342, 'pacificOcean-NewCaledonia': 379, 'africa-Togo': 49, 'europe-Latvia': 305, 'europe-Liechtenstein': 306, 'europe-Austria': 286, 'africa-Ethiopia': 18, 'americas-DominicanRepublic': 107, 'asia-Russia-Moscow05LakeBaikal': 240, 'asia-Indonesia-IrianJayaAndMoluccas': 203, 'americas-Grenada': 115, 'americas-USA-EastTime-KentuckyWayneCounty': 148, 'atlanticOcean-CapeVerde': 261, 'americas-FrenchGuiana': 110, 'africa-Algeria': 1, 'americas-USA-MountTime-SouthIdahoAndEastOregon': 157, 'pacificOcean-Fiji': 364, 'asia-Taiwan': 251, 'europe-Monaco': 312, 'pacificOceanUSA-AlaskaTime-WestAlaska': 413, 'europe-BosniaHerzegovina': 289, 'europe-Macedonia': 309, 'americas-Nicaragua': 133, 'americas-Argentina-Jujuy': 59, 'americas-USA-Hawaii': 166, 'africa-Liberia': 26, 'atlanticOcean-FalklandIslands': 263, 'americas-Canada-CenStdTime-SaskatchewanMostlocation': 91, 'pacificOceanUSA-MountTime': 405, 'africa-Uganda': 51, 'asia-Japan': 207, 'africa-Swaziland': 47, 'americas-Brazil-Pernambuco': 70, 'antarctica-CaseyStationBaileyPeninsula': 176, 'asia-Vietnam': 258, 'africa-SierraLeone': 40, 'americas-Canada-EastStdTime-CenNunavut': 87, 'australia-NewSouthWales-MostLocations': 277, 'pacificOceanUSA-EastStdTime-IndianaStarkeCounty': 400, 'americas-CaymanIslands': 100, 'asia-Pakistan': 229, 'pacificOcean-USMinorOutlyingIslands-MidwayIslands': 417, 'asia-Kazakhstan-MostLocations': 209, 'africa-Mauritania': 31, 'europe-Britain-UKNorthernIreland': 291, 'africa-Nigeria': 36, 'pacificOceanUSA-MountTime-Navajo': 407, 'americas-CostaRica': 104, 'asia-Lebanon': 219, 'americas-Canada-AtlanTime-NovaScotia': 81, 'australia-Queensland-MostLocations': 279, 'europe-Russia-Moscow-01Kaliningrad': 320, 'africa-Western-Sahara': 52, 'pacificOceanWallisAndFutuna': 420, 'pacificOcean-Tuval': 393, 'americas-USA-AlaskaTime': 161, 'atlanticOcean-Iceland': 264, 'asia-Korea-North': 214, 'americas-Brazil-MatoGrossoDoSul': 74, 'africa-Guinea': 22, 'asia-Kazakhstan-Aqtobe': 211, 'pacificOcean-SamoaWestern': 389, 'europe-Russia-Moscow03WestSiberia': 324, 'pacificOceanUSA-EastTime-MichiganMostLocations': 395, 'pacificOcean-CookIslands': 362, 'atlanticOcean-Spain-CeutaMelilla': 270, 'atlanticOcean-SouthGeorgia-SouthSandwichIslands': 268, 'americas-PuertoRico': 137, 'asia-Malaysia-PeninsularMalaysia': 221, 'pacificOcean-MarshallIslands-MostLocations': 372, 'asia-Indonesia-JavaAndSumatra': 200, 'pacificOceanUSA-MountStdTime-Arizona': 408, 'americas-Greenland-ThulePituffik': 114, 'asia-Mongolia-BayanOlgiyGoviAltaiHovdUvsZavkhan': 224, 'americas-Belize': 65, 'asia-SriLanka': 249, 'americas-USA-MountTime-Navajo': 158, 'americas-Canada-EastStdTime-PangnirtungNunavut': 85, 'antarctica-Dumont-dUrvilleBaseTerreAdelie': 178, 'pacificOceanUSA-EastStdTime-IndianaCrawfordCounty': 399, 'asia-Cambodia': 189, 'americas-Haiti': 119, 'americas-Canada-PacificTime-NorthYukon': 99, 'europe-Portugal-Mainland': 316, 'indianOcean-Comoros': 352, 'asia-Qatar': 232, 'americas-Barbados': 64, 'americas-Cuba': 105, 'americas-ElSalvado': 109, 'americas-USA-CentTime-MichiganWisconsinborder': 154, 'atlanticOcean-Spain-Mainland': 269, 'africa-Ghana': 21, 'africa-Congo-EastDemRepCongo': 11, 'africa-Congo-WestDemRepCongo': 10, 'americas-Canada-MountTime-CentralNorthwestTerritories': 94, 'africa-Benin': 3, 'americas-USA-PacificTime': 160, 'americas-Brazil-Roraima': 76, 'europe-Hungary': 302, 'pacificOceanUSA-Hawaii': 415, 'americas-Argentina-MostLocations': 58, 'pacificOcean-Tonga': 392, 'americas-StLucia': 139, 'antarctica-VostokStationSMagneticPole': 177, 'americas-TurksAndCaicosIs': 144, 'indianOcean-BritishIndianOceanTerritory': 349, 'europe-Russia-Moscow07AmurRiver': 329, 'americas-Mexico-PacificTime': 130, 'europe-Lithuania': 307, 'indianOcean-Maldives': 355, 'asia-Malaysia-SabahSarawak': 222, 'americas-Guadeloupe': 116, 'americas-Canada-MountTime-AlbertaEastBritishColumbia': 93, 'americas-Ecuador': 108, 'americas-Canada-CenTime-WestNunavut': 90, 'pacificOcean-Pala': 385, 'europe-Finland': 297, 'africa-Eritrea': 17, 'americas-Argentina-EArgentina': 57, 'pacificOcean-Micronesia-TrukOrChuuk': 375, 'americas-USA-MountTime': 156, 'europe-Russia-Moscow07SakhalinIsland': 330, 'pacificOceanUSA-EastTime': 394, 'europe-Yugoslavia': 348, 'atlanticOcean-Portugal-Mainland': 265, 'americas-Argentina-Catamarca': 60, 'americas-Greenland-ScoresbysundIttoqqortoormiit': 113, 'americas-Chile-EasterIsland': 102, 'europe-Russia-Moscow05LakeBaikal': 327, 'pacificOcean-SamoaAmerican': 388, 'pacificOceanUSA-CentTime-NorthDakotaOliverCounty': 404, 'asia-Bangladesh': 186, 'asia-Russia-Moscow00WestRussia': 234, 'europe-Italy': 304, 'asia-Laos': 218, 'pacificOcean-NorthernMarianaIslands': 384, 'asia-HongKong': 198, 'pacificOcean-Micronesia-Kosrae': 377, 'asia-Indonesia-EastSouthBorneoCelebesBaliNusaTengarraWestTimor': 202, 'europe-Sweden': 340, 'pacificOcean-Naur': 378, 'europe-Germany': 299, 'asia-Singapore': 248, 'americas-USA-AlaskaTime-WestAlaska': 164, 'asia-EastTimor': 196, 'europe-Norway': 314, 'americas-Paraguay': 135, 'pacificOcean-NewZealand-ChathamIslands': 381, 'asia-Russia-Moscow08Magadan': 244, 'americas-Mexico-MountTime-SBajaNayaritSinaloa': 127, 'africa-Gambia': 20, 'europe-Russia-Moscow08Magadan': 331, 'australia-Queensland-HolidayIslands': 280, 'africa-Cameroon': 7, 'europe-Ukraine-CentralCrimea': 346, 'europe-Bulgaria': 292, 'europe-Russia-Moscow10BeringSea': 333, 'americas-USA-EastStdTime-IndianaStarkeCounty': 151, 'asia-Turkmenistan': 254, 'americas-Brazil-AtlanticIslands': 67, 'africa-Rwanda': 37, 'americas-Canada-MountStdTime-DawsonCreekFortSaintJohnBritishColumbia': 96.
             agCurCfgIdleCLITimeout 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.53 integer32 read-only
Set idle CLI sessions timeout.
             agNewCfgIdleCLITimeout 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.54 integer32 read-write
Set idle CLI sessions timeout.
             agCurCfgUfdTrap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.55 integer read-only
The current status of the UFDFO SNMP trap. Enumeration: 'disabled': 3, 'enabled': 2.
             agNewCfgUfdTrap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.56 integer read-write
Enable or disable sending UFDFO SNMP trap. Enumeration: 'disabled': 3, 'enabled': 2.
             agCurBootNxtCliMode 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.64 integer read-only
Current boot mode. Enumeration: 'iscli': 2, 'aoscli': 1.
             agNewBootNxtCliMode 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.65 integer read-write
Next cli boot mode. Enumeration: 'iscli': 2, 'aoscli': 1.
             agCurCfgReminders 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.70 integer read-only
Current status of reminders feature. Enumeration: 'enable': 1, 'disable': 2.
             agNewCfgReminders 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.71 integer read-write
Enable or disable reminders feature. Enumeration: 'enable': 1, 'disable': 2.
         agPortConfig 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2
             agPortTableMaxEnt 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.1 integer32 read-only
The maximum number of rows in the port configuration host table.
             agPortCurCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2 no-access
The table of port configuration in the current_configuration block.
                 agPortCurCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1 no-access
A row in the port table in the current_configuration block.
                     agPortCurCfgIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.1 integer32 read-only
The index of the row in port configurations table.
                     agPortCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.2 integer read-only
This is the state of the port. Enumeration: 'disabled': 3, 'enabled': 2.
                     agPortCurCfgVlanTag 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.3 integer read-only
This is VLAN tag state of the port Enumeration: 'untagged': 3, 'tagged': 2.
                     agPortCurCfgStp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.4 integer read-only
This object is used to turn Spanning Tree on or off for the port. Enumeration: 'on': 2, 'off': 3.
                     agPortCurCfgRmon 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.5 integer read-only
This object is used to turn RMON on or off on the port. Enumeration: 'on': 2, 'off': 3.
                     agPortCurCfgPVID 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.6 integer read-only
The default VLAN ID for the port.
                     agPortCurCfgGigEthAutoNeg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.11 integer read-only
This object is used to turn the autonegotiation on or off for gigabit Ethernet connection. Enumeration: 'on': 2, 'off': 3.
                     agPortCurCfgGigEthSpeed 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.12 integer read-only
Selects the port speed for gigabit Ethernet connection. Enumeration: 'mbs1000': 5, 'mbs10': 2, 'mbs100': 3, 'any': 4.
                     agPortCurCfgGigEthMode 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.13 integer read-only
This object is used to select port mode for gigabit Ethernet connection. Enumeration: 'half-duplex': 3, 'full-duplex': 2, 'full-or-half-duplex': 4.
                     agPortCurCfgGigEthFctl 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.14 integer read-only
This object is used to select port flow control for gigabit Ethernet connection. Enumeration: 'transmit': 2, 'receive': 3, 'none': 5, 'both': 4.
                     agPortCurCfgPortName 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.15 displaystring read-only
The switch port name.
                     agPortCurCfgLinkTrap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.18 integer read-only
Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise. Enumeration: 'disabled': 2, 'enabled': 1.
                     agPortCurCfgTagPVID 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.19 integer read-only
This is PVID tag state of the port Enumeration: 'untagged': 3, 'tagged': 2.
                     agPortCurCfgMulticastThreshold 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.20 integer read-only
Current status of the port's Multicast Threshold. Enumeration: 'disabled': 2, 'enabled': 1.
                     agPortCurCfgMulticastThresholdRate 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.21 integer read-only
Current port's Multicast Threshold Rate.
                     agPortCurCfgBroadcastThreshold 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.22 integer read-only
Current status of the port's Broadcast Threshold. Enumeration: 'disabled': 2, 'enabled': 1.
                     agPortCurCfgBroadcastThresholdRate 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.23 integer read-only
Current port's Broadcast Threshold Rate.
                     agPortCurCfgDLFThreshold 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.24 integer read-only
Current status of the port's Destination Lookup Fail Threshold. Enumeration: 'disabled': 2, 'enabled': 1.
                     agPortCurCfgDLFThresholdRate 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.25 integer read-only
Current port's Destination Lookup Fail Threshold Rate.
                 agPortFiberCurCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2 no-access
The table of fiber port configuration in the current_configuration block.
                     agPortFiberCurCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1 no-access
A row in the fiber port table in the current_configuration block.
                         agPortFiberCurCfgIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.1 integer32 read-only
The index of the row in fiber port current configuration table.
                         agPortFiberCurCfgTxCtrl 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.2 integer read-only
This is the state of the TX control. Enumeration: 'disabled': 0, 'enabled': 1.
                         agPortFiberCurCfgTxPulse 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.3 integer read-only
This is the state of the TX pulse. Enumeration: 'disabled': 0, 'enabled': 1.
                         agPortFiberCurCfgTxUp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.4 integer read-only
Current TX up time.
                         agPortFiberCurCfgTxDn 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.5 integer read-only
Current TX dn time.
             agPortNewCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3 no-access
The table of port configuration in the new_configuration block.
                 agPortNewCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1 no-access
A row in the port configuration table in the new_configuration block.
                     agPortNewCfgIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.1 integer32 read-only
The index of the row in port configurations table.
                     agPortNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.2 integer read-write
This is the state of the port. Enumeration: 'disabled': 3, 'enabled': 2.
                     agPortNewCfgVlanTag 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.3 integer read-write
This is VLAN tag state of the port Enumeration: 'untagged': 3, 'tagged': 2.
                     agPortNewCfgStp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.4 integer read-write
This object is used to turn Spanning Tree on or off for the port. Enumeration: 'on': 2, 'off': 3.
                     agPortNewCfgRmon 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.5 integer read-write
This object is used to turn RMON on or off on the port. Enumeration: 'on': 2, 'off': 3.
                     agPortNewCfgPVID 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.6 integer read-write
The default VLAN ID for the port.
                     agPortNewCfgGigEthAutoNeg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.11 integer read-write
This object is used to turn the autonegotiation on or off for gigabit Ethernet connection. Enumeration: 'on': 2, 'off': 3.
                     agPortNewCfgGigEthSpeed 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.12 integer read-write
Selects the port speed for gigabit Ethernet connection. Enumeration: 'mbs1000': 5, 'mbs10': 2, 'mbs100': 3, 'any': 4.
                     agPortNewCfgGigEthMode 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.13 integer read-write
This object is used to select port mode for gigabit Ethernet connection. Enumeration: 'half-duplex': 3, 'full-duplex': 2, 'full-or-half-duplex': 4.
                     agPortNewCfgGigEthFctl 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.14 integer read-write
This object is used to select port flow control for gigabit Ethernet connection. Enumeration: 'transmit': 2, 'receive': 3, 'none': 5, 'both': 4.
                     agPortNewCfgPortName 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.15 displaystring read-write
The switch port name.
                     agPortNewCfgLinkTrap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.18 integer read-write
Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise. Enumeration: 'disabled': 2, 'enabled': 1.
                     agPortNewCfgTagPVID 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.19 integer read-write
This is PVID tag state of the port Enumeration: 'untagged': 3, 'tagged': 2.
                     agPortNewCfgMulticastThreshold 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.20 integer read-write
New status of the port's Multicast Threshold. Enumeration: 'disabled': 2, 'enabled': 1.
                     agPortNewCfgMulticastThresholdRate 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.21 integer read-write
New port's Multicast Threshold Rate.
                     agPortNewCfgBroadcastThreshold 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.22 integer read-write
New status of the port's Broadcast Threshold. Enumeration: 'disabled': 2, 'enabled': 1.
                     agPortNewCfgBroadcastThresholdRate 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.23 integer read-write
New port's Broadcast Threshold Rate.
                     agPortNewCfgDLFThreshold 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.24 integer read-write
New status of the port's Destination Lookup Fail Threshold. Enumeration: 'disabled': 2, 'enabled': 1.
                     agPortNewCfgDLFThresholdRate 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.25 integer read-write
New port's Destination Lookup Fail Threshold Rate.
                 agPortFiberNewCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2 no-access
The table of fiber port configuration in the new_configuration block.
                     agPortFiberNewCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1 no-access
A row in the fiber port table in the new_configuration block.
                         agPortFiberNewCfgIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.1 integer32 read-only
The index of the row in fiber port new configuration table.
                         agPortFiberNewCfgTxCtrl 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.2 integer read-write
New TX control. Enumeration: 'disabled': 0, 'enabled': 1.
                         agPortFiberNewCfgTxPulse 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.3 integer read-write
New TX pulse. Enumeration: 'disabled': 0, 'enabled': 1.
                         agPortFiberNewCfgTxUp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.4 integer read-write
New TX up time.
                         agPortFiberNewCfgTxDn 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.5 integer read-write
New TX dn time.
         agRadiusConfig 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3
             radCurCfgPrimaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.1 ipaddress read-only
The IP address of the Primary RADIUS server.
             radNewCfgPrimaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.2 ipaddress read-write
The IP address of the Primary RADIUS server.
             radCurCfgSecondaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.3 ipaddress read-only
The IP address of the Secondary RADIUS server.
             radNewCfgSecondaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.4 ipaddress read-write
The IP address of the Secondary RADIUS server.
             radCurCfgPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.5 integer read-only
Specify the RADIUS port number.
             radNewCfgPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.6 integer read-write
Speicfy the RADIUS port number.
             radCurCfgTimeout 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.7 integer read-only
The maximum number of seconds before resending authentication to RADIUS server.
             radNewCfgTimeout 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.8 integer read-write
The maximum number of seconds before resending authentication to RADIUS server.
             radCurCfgRetries 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.9 integer read-only
Number of retries to the RADIUS server.
             radNewCfgRetries 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.10 integer read-write
Number of retries to the RADIUS server.
             radCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.11 integer read-only
Enable or disbale RADIUS authentication. Enumeration: 'disabled': 3, 'enabled': 2.
             radNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.12 integer read-write
Enable or disable RADIUS authentication. Enumeration: 'disabled': 3, 'enabled': 2.
             radCurCfgAuthenString 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.13 displaystring read-only
The RADIUS authentication string.
             radNewCfgAuthenString 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.14 displaystring read-write
The RADIUS authentication string.
             radCurCfgTelnet 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.15 integer read-only
Enable or disbale RADIUS backdoor for telnet. Enumeration: 'disabled': 2, 'enabled': 1.
             radNewCfgTelnet 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.16 integer read-write
Enable or disable RADIUS backdoor for telnet. Enumeration: 'disabled': 2, 'enabled': 1.
             radCurCfgAuthenSecondString 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.17 displaystring read-only
The second RADIUS authentication string.
             radNewCfgAuthenSecondString 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.18 displaystring read-write
The second RADIUS authentication string.
             radCurCfgSecBd 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.19 integer read-only
Enable or disbale RADIUS secure backdoor for telnet. Enumeration: 'disabled': 2, 'enabled': 1.
             radNewCfgSecBd 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.20 integer read-write
Enable or disable RADIUS secure backdoor for telnet. Enumeration: 'disabled': 2, 'enabled': 1.
         agNTP 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4
             agCurCfgNTPServer 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.1 ipaddress read-only
The NTP Server Address.
             agNewCfgNTPServer 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.2 ipaddress read-write
The NTP Server Address.
             agCurCfgNTPResyncInterval 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.3 integer read-only
The NTP Server resync interval in minutes.
             agNewCfgNTPResyncInterval 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.4 integer read-write
The NTP Server resync interval in minutes.
             agCurCfgNTPTzoneHHMM 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.5 displaystring read-only
The NTP Server timezone offset from GMT formatted as (+/-)HH:MM.
             agNewCfgNTPTzoneHHMM 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.6 displaystring read-write
The NTP Server timezone offset from GMT formatted as (+/-)HH:MM. The valid range is from -12:59 to +12:59.
             agCurCfgNTPDlight 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.7 integer read-only
Enable/disable daylight savings time. Enumeration: 'disabled': 2, 'enabled': 1.
             agNewCfgNTPDlight 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.8 integer read-write
Enable/disable daylight savings time. Enumeration: 'disabled': 2, 'enabled': 1.
             agCurCfgNTPService 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.9 integer read-only
Enable/disable NTP Service. Enumeration: 'disabled': 2, 'enabled': 1.
             agNewCfgNTPService 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.10 integer read-write
Enable/disable NTP Service. Enumeration: 'disabled': 2, 'enabled': 1.
             agCurCfgNTPSecServer 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.11 ipaddress read-only
The Secondary NTP Server Address.
             agNewCfgNTPSecServer 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.12 ipaddress read-write
The Secondary NTP Server Address.
         agSyslog 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5
             agCurCfgSyslogHost 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.1 ipaddress read-only
The syslog host IP address, as currently configured in the current_configuration block.
             agNewCfgSyslogHost 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.2 ipaddress read-write
The syslog host IP address, in the new_configuration block.
             agCurCfgSyslog2Host 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.3 ipaddress read-only
The second syslog host IP address, as currently configured in the current_configuration block.
             agNewCfgSyslog2Host 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.4 ipaddress read-write
The second syslog host IP address, in the new_configuration block.
             agCurCfgSyslogFac 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.5 integer read-only
The facility of syslog host in the current_configuration block. Enumeration: 'local5': 6, 'local4': 5, 'local7': 8, 'local6': 7, 'local1': 2, 'local0': 1, 'local3': 4, 'local2': 3.
             agNewCfgSyslogFac 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.6 integer read-write
The facility of syslog host in the new_configuration block. Enumeration: 'local5': 6, 'local4': 5, 'local7': 8, 'local6': 7, 'local1': 2, 'local0': 1, 'local3': 4, 'local2': 3.
             agCurCfgSyslog2Fac 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.7 integer read-only
The facility of syslog2 host in the current_configuration block. Enumeration: 'local5': 6, 'local4': 5, 'local7': 8, 'local6': 7, 'local1': 2, 'local0': 1, 'local3': 4, 'local2': 3.
             agNewCfgSyslog2Fac 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.8 integer read-write
The facility of syslogs host in the new_configuration block. Enumeration: 'local5': 6, 'local4': 5, 'local7': 8, 'local6': 7, 'local1': 2, 'local0': 1, 'local3': 4, 'local2': 3.
             agClrSyslogMsgs 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.9 integer read-write
Clears all current Syslog messages. Enumeration: 'reset': 2, 'other': 1.
             agSyslogMsgTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.10 integer32 read-only
The maximum number of rows in the syslog message table.
             agSyslogMsgTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11 no-access
The table of syslog messages.
                   agSyslogMsgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11.1 no-access
A syslog message stored on the switch.
                       agSyslogMsgIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11.1.1 integer32 read-only
The syslog message table index.
                       agSyslogMessage 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11.1.2 displaystring read-only
The syslog message.
             agLog 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12
                   agNewCfgSyslogTrapConsole 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.1 integer read-write
Enable or disable console syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapConsole 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.2 integer read-only
Enable or disable console syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapSystem 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.3 integer read-write
Enable or disable system level syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapSystem 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.4 integer read-only
Enable or disable system level syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapMgmt 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.5 integer read-write
Enable or disable management(flash, config, login) syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapMgmt 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.6 integer read-only
Enable or disable management(flash, config, login) syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapCli 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.7 integer read-write
Enable or disable CLI generated error syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapCli 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.8 integer read-only
Enable or disable CLI generated error syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapStg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.9 integer read-write
Enable or disable spanning tree syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapStg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.10 integer read-only
Enable or disable spanning tree syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapVlan 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.11 integer read-write
Enable or disable VLAN syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapVlan 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.12 integer read-only
Enable or disable VLAN syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapSsh 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.19 integer read-write
Enable or disable SSH, RADIUS syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapSsh 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.20 integer read-only
Enable or disable SSH, RADIUS syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapVrrp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.21 integer read-write
Enable or disable VRRP syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapVrrp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.22 integer read-only
Enable or disable VRRP syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapNtp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.25 integer read-write
Enable or disable NTP syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapNtp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.26 integer read-only
Enable or disable NTP syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapIp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.31 integer read-write
Enable or disable IP related syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapIp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.32 integer read-only
Enable or disable IP related syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapWeb 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.35 integer read-write
Enable or disable WEBUI related syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapWeb 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.36 integer read-only
Enable or disable WEBUI related syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapOspf 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.41 integer read-write
Enable or disable OSPF related syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapOspf 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.42 integer read-only
Enable or disable OSPF related syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapRmon 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.45 integer read-write
Enable or disable rmon related syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapRmon 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.46 integer read-only
Enable or disable rmon related syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapUfd 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.47 integer read-write
Enable or disable UFD related syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapUfd 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.48 integer read-only
Enable or disable UFD related syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapCfg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.49 integer read-write
Enable or disable CFG related syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapCfg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.50 integer read-only
Enable or disable CFG related syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrap8021x 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.51 integer read-write
Enable or disable 802.1X protocol related syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrap8021x 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.52 integer read-only
Enable or disable 802.1X protocol related syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapHotlinks 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.53 integer read-write
Enable or disable Hot Links related syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapHotlinks 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.54 integer read-only
Enable or disable Hot Links related syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
             agCurCfgSyslogSev 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.13 integer read-only
The severity of syslog host in the current configuration block. Enumeration: 'warning4': 5, 'crit2': 3, 'debug7': 8, 'alert1': 2, 'emerg0': 1, 'err3': 4, 'notice5': 6, 'info6': 7.
             agNewCfgSyslogSev 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.14 integer read-write
The severity of syslog host in the new configuration block. Enumeration: 'warning4': 5, 'crit2': 3, 'debug7': 8, 'alert1': 2, 'emerg0': 1, 'err3': 4, 'notice5': 6, 'info6': 7.
             agCurCfgSyslog2Sev 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.15 integer read-only
The severity of syslog2 host in the current configuration block. Enumeration: 'warning4': 5, 'crit2': 3, 'debug7': 8, 'alert1': 2, 'emerg0': 1, 'err3': 4, 'notice5': 6, 'info6': 7.
             agNewCfgSyslog2Sev 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.16 integer read-write
The severity of syslogs host in the new configuration block. Enumeration: 'warning4': 5, 'crit2': 3, 'debug7': 8, 'alert1': 2, 'emerg0': 1, 'err3': 4, 'notice5': 6, 'info6': 7.
         agTrapHost 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6
             agTrapHostTableMaxEnt 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.1 integer32 read-only
The maximum number of rows in the trap host table.
             agCurCfgTrapHostTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2 no-access
The table of trap hosts which to send SNMP traps in the current_configuration block.
                 agCurCfgTrapHostEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1 no-access
A row in the trap host table in the current_configuration block.
                     agCurCfgTrapHostIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1.1 integer32 read-only
The index of the row in trap host table.
                     agCurCfgTrapHostIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1.2 ipaddress read-only
The IP address of a trap host.
                     agCurCfgTrapHostCommString 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1.3 displaystring read-only
The SNMP community string to use with the trap host
             agNewCfgTrapHostTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3 no-access
The table of trap hosts which to send SNMP traps in the new_configuration block.
                 agNewCfgTrapHostEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1 no-access
A row in the trap host table in the new_configuration block.
                     agNewCfgTrapHostIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1.1 integer32 read-only
The index of the row in trap host table.
                     agNewCfgTrapHostIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1.2 ipaddress read-write
The IP address of a trap host.
                     agNewCfgTrapHostCommString 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1.3 displaystring read-write
The SNMP community string to use with the trap host
         agTftp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7
             agTftpServer 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.1 displaystring read-write
The TFTP server IP address or domain name.
             agTftpImage 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.2 integer read-write
Whether the image file should be loaded in image1 or image2 or boot in flash. Enumeration: 'image2': 3, 'image1': 2, 'boot': 4.
             agTftpImageFileName 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.3 displaystring read-write
The image file name to be downloaded.
             agTftpCfgFileName 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.4 displaystring read-write
The configuration file name.
             agTftpDumpFileName 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.5 displaystring read-write
The file name for core dump.
             agTftpAction 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.6 integer read-write
This is an action object to perform various TFTP Get or Put functions. The TFTP sever is specified in agTftpServer object. img-get(2) - Download switch image from a specified image file (agTftpImageFileName) on the TFTP server to the destinated storage (agTftpImage). cfg-get(3) - Download switch configuration from a specified file (agTftpCfgFileName) on the TFTP server. cfg-put(4) - Upload switch configuration to a specified file (agTftpCfgFileName) on the TFTP server. dump-put(5)- Download switch core dump to a specified file (agTftpDumpFileName) on the TFTP server. img-put(7) - Upload specified switch image to a specified image file (agTftpImageFileName) on the TFTP server. tsdump-put(5)- Download switch core dump to a specified file (agTftpTSDumpFileName) on the TFTP server. other(1) is returned always when read. Enumeration: 'img-get': 2, 'dump-put': 5, 'other': 1, 'cfg-get': 3, 'img-put': 7, 'cfg-put': 4, 'tsdump-put': 8.
             agTftpLastActionStatus 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.7 displaystring read-only
The recorded status of the previous TFTP activity.
             agTftpUserName 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.9 displaystring read-write
The username for FTP server or blank for TFTP server.
             agTftpPassword 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.10 displaystring read-write
The password for FTP server.
             agTftpTSDumpFileName 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.11 displaystring read-write
The file name for TS dump.
         agApply 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8
             agApplyPending 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.1 integer read-only
This object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user then can apply the changes by setting proper value to the object agApplyConfiguration described above. Enumeration: 'applyNeeded': 2, 'noApplyNeeded': 3.
             agApplyConfig 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.2 integer read-write
When this object is read the current state is returned. idle(3) indicates that there is no apply in progess. complete(5) indicates that the last apply operation is completed. Setting the value to apply(1), will write all the changes made since the last apply to the current configuration block. If the apply is successful this variable will return the state 'complete' else it will return 'failed'. In case of failure, to read the reason for failure use the agApplyTable. Enumeration: 'apply': 1, 'idle': 2, 'inprogress': 3, 'failed': 5, 'complete': 4.
             agApplyTableSize 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.4 integer32 read-only
The number of strings in the apply table.
             agApplyTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5 no-access
The table of URL path for URL load balancing in the current_config.
                 agApplyTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5.1 no-access
Information about an URL path for URL load balancing.
                     agApplyIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5.1.1 integer32 read-only
The table index.
                     agApplyString 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5.1.2 octet string read-only
A string in the apply table.
         agTacacsConfig 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10
               tacCurCfgPrimaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.1 ipaddress read-only
The IP address of the Primary TACACS+ server.
               tacNewCfgPrimaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.2 ipaddress read-write
The IP address of the Primary TACACS+ server.
               tacCurCfgSecondaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.3 ipaddress read-only
The IP address of the Secondary TACSACS server.
               tacNewCfgSecondaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.4 ipaddress read-write
The IP address of the Secondary TACACS+ server.
               tacCurCfgPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.5 integer read-only
Specify the TACACS+ port number.
               tacNewCfgPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.6 integer read-write
Specify the TACACS+ port number.
               tacCurCfgTimeout 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.7 integer read-only
The maximum number of seconds before resending authentication to TACACS+ server.
               tacNewCfgTimeout 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.8 integer read-write
The maximum number of seconds before resending authentication to TACACS+ server.
               tacCurCfgRetries 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.9 integer read-only
Number of retries to the TACACS+ server.
               tacNewCfgRetries 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.10 integer read-write
Number of retries to the TACACS+ server.
               tacCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.11 integer read-only
Enable or disbale TACACS+ authentication. Enumeration: 'disabled': 3, 'enabled': 2.
               tacNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.12 integer read-write
Enable or disable TACACS+ authentication. Enumeration: 'disabled': 3, 'enabled': 2.
               tacCurCfgAuthenString 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.13 displaystring read-only
The TACACS+ authentication string.
               tacNewCfgAuthenString 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.14 displaystring read-write
The TACACS+ authentication string.
               tacCurCfgTelnet 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.15 integer read-only
Enable or disbale TACACS+ backdoor for telnet. Enumeration: 'disabled': 2, 'enabled': 1.
               tacNewCfgTelnet 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.16 integer read-write
Enable or disable TACACS+ backdoor for telnet. Enumeration: 'disabled': 2, 'enabled': 1.
               tacCurCfgAuthenSecondString 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.17 displaystring read-only
The second TACACS+ authentication string.
               tacNewCfgAuthenSecondString 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.18 displaystring read-write
The second TACACS+ authentication string.
               tacCurCfgSecBd 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.23 integer read-only
Enable or disbale TACACS+ secure backdoor for telnet. Enumeration: 'disabled': 2, 'enabled': 1.
               tacNewCfgSecBd 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.24 integer read-write
Enable or disable TACACS+ secure backdoor for telnet. Enumeration: 'disabled': 2, 'enabled': 1.
               tacCurCfgCmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.25 integer read-only
Enable/Disable Tacacs+ new prividlege level maping. Enumeration: 'disabled': 2, 'enabled': 1.
               tacNewCfgCmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.26 integer read-write
Enable/Disable Tacacs+ new prividlege level maping. Enumeration: 'disabled': 2, 'enabled': 1.
               agTacacsUserMapCurCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31 no-access
The table of tacacs+ user map current configuration.
                     agTacacsUserMapCurCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31.1 no-access
A row in the tacacs+ user mapping table.
                         agTacacsUserMapCurCfgUId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31.1.1 integer32 read-only
The current config remote privilege identifier.
                         agTacacsUserMapCurCfgMapping 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31.1.2 integer read-only
Current Tacacs+ user privilege mappings. Enumeration: 'oper': 2, 'admin': 3, 'user': 1, 'invalid': 0.
               agTacacsUserMapNewCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32 no-access
The table of tacacs+ user map new configuration.
                     agTacacsUserMapNewCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32.1 no-access
A row in the tacacs+ user mapping table.
                         agTacacsUserMapNewCfgUId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32.1.1 integer32 read-only
The new config remote privilege identifier.
                         agTacacsUserMapNewCfgMapping 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32.1.2 integer read-only
Set new Tacacs+ user privilege mappings. Enumeration: 'oper': 2, 'admin': 3, 'user': 1, 'invalid': 0.
         agMgmtNetConfig 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11
               agMgmtNetTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.1 integer32 read-only
The maximum number of entries in the Management Network Table.
               agCurCfgMgmtNetTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2 no-access
The table for Management Network definitions in the current configuration block.
                   agCurCfgMgmtNetEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1 no-access
A row in the management network definition table.
                       agCurCfgMgmtNetIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1.1 integer32 read-only
The index of the Management Network Definition table.
                       agCurCfgMgmtNetSubnet 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1.2 ipaddress read-only
The Management Network Address in the current_configuration block.
                       agCurCfgMgmtNetMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1.3 ipaddress read-only
The Management Network Mask in the current_configuration block.
               agNewCfgMgmtNetTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3 no-access
The table for Management Network definitions in the new configuration block.
                   agNewCfgMgmtNetEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1 no-access
A row in the management network definition table.
                       agNewCfgMgmtNetIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.1 integer32 read-only
The index of the Management Network Definition table.
                       agNewCfgMgmtNetSubnet 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.2 ipaddress read-only
The Management Network Address in the new_configuration block.
                       agNewCfgMgmtNetMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.3 ipaddress read-only
The Management Network Mask in the new_configuration block.
                       agNewCfgMgmtNetDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.4 integer read-only
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
         agAccess 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12
               agAccessUserMaxUserID 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.1 integer32 read-only
The maximum number of Users ID.
               agAccessUserCurCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2 no-access
The table of Access user configuration.
                   agAccessUserCurCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1 no-access
A row in the Access user configuration table.
                       agAccessUserCurCfgUId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.1 integer32 read-only
The User identifier.
                       agAccessUserCurCos 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.2 integer read-only
The user class of service. Enumeration: 'oper': 3, 'admin': 6, 'user': 0.
                       agAccessUserCurCfgName 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.3 displaystring read-only
The user name.
                       agAccessUserCurCfgPswd 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.4 displaystring read-only
The character string representing the user passworde.
                       agAccessUserCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.5 integer read-only
Enable or disable a user. Enumeration: 'disabled': 3, 'enabled': 2.
               agAccessUserNewCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3 no-access
The table of Access user configuration.
                   agAccessUserNewCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1 no-access
A row in the Access user configuration table.
                       agAccessUserNewCfgUId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.1 integer32 read-only
The User identifier.
                       agAccessUserNewCos 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.2 integer read-only
The user class of service. Enumeration: 'oper': 3, 'admin': 6, 'user': 0.
                       agAccessUserNewCfgName 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.3 displaystring read-only
The user name.
                       agAccessUserNewCfgPswd 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.4 displaystring read-only
The character string representing the user passworde.
                       agAccessUserNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.5 integer read-only
Enable or disable a user. Enumeration: 'disabled': 3, 'enabled': 2.
                       agAccessUserNewCfgDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.6 integer read-only
This is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a User Enumeration: 'other': 1, 'delete': 2.
     agentStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2
         pktStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1
             pktStatsAllocs 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.1 counter32 read-only
Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack.
             pktStatsFrees 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.2 counter32 read-only
Total number of times the packet buffers are freed(released) to the packet buffer pool by the TCP/IP protocol stack.
             pktStatsAllocFails 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.3 counter32 read-only
Total number of packet allocation failures from the packet buffer pool by the TCP/IP protocol stack.
             pktStatsMediums 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.4 gauge32 read-only
Total number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
             pktStatsJumbos 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.5 gauge32 read-only
Total number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
             pktStatsSmalls 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.6 gauge32 read-only
Total number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack.
             pktStatsMediumsHiWatermark 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.7 counter32 read-only
The highest number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
             pktStatsJumbosHiWatermark 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.8 counter32 read-only
The highest number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
             pktStatsSmallsHiWatermark 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.9 counter32 read-only
The highest number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack.
         mpCpuStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.2
             mpCpuStatsUtil1Second 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.2.1 integer32 read-only
The utilization of MP CPU over 1 second. It shows the percentage.
             mpCpuStatsUtil4Seconds 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.2.2 integer32 read-only
The utilization of MP CPU over 4 seconds. It shows the percentage.
             mpCpuStatsUtil64Seconds 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.2.3 integer32 read-only
The utilization of MP CPU over 64 seconds. It shows the percentage.
         portStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3
             portStatsTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1 no-access
The table of port statistics.
                 portStatsTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1 no-access
A row in the port stats table.
                     portStatsIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.1 integer32 read-only
The port index.
                     portStatsPhyIfInOctets 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.2 counter32 read-only
The total number of octets received on the interface, including framing characters.
                     portStatsPhyIfInUcastPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.3 counter32 read-only
The number of subnetwork-unicast packets delivered to a higher-layer protocol.
                     portStatsPhyIfInNUcastPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.4 counter32 read-only
The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
                     portStatsPhyIfInDiscards 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.5 counter32 read-only
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
                     portStatsPhyIfInErrors 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.6 counter32 read-only
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
                     portStatsPhyIfInUnknownProtos 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.7 counter32 read-only
The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
                     portStatsPhyIfOutOctets 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.8 counter32 read-only
The total number of octets transmitted out of the interface, including framing characters.
                     portStatsPhyIfOutUcastPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.9 counter32 read-only
The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
                     portStatsPhyIfOutNUcastPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.10 counter32 read-only
The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
                     portStatsPhyIfOutDiscards 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.11 counter32 read-only
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
                     portStatsPhyIfOutErrors 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.12 counter32 read-only
The number of outbound packets that could not be transmitted because of errors.
                     portStatsPhyIfOutQLen 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.13 gauge32 read-only
The length of the output packet queue (in packets).
                     portStatsPhyIfInBroadcastPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.14 counter32 read-only
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.
                     portStatsPhyIfOutBroadcastPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.15 counter32 read-only
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.
                     portStatsClear 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.16 integer read-write
Setting this value to clear(1) clears the stats for this port. Enumeration: 'clear': 1, 'ok': 2.
                     portStatsPhyIfInMulticastPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.17 counter32 read-only
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer.
                     portStatsPhyIfOutMulticastPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.18 counter32 read-only
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent.
             dot1xPortStatsTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2 no-access
The table of 802.1x port statistics.
                 dot1xPortStatsTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1 no-access
A row in the 802.1x port stats table.
                     dot1xPortStatsIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.1 integer32 read-only
The 802.1x port stats index.
                     eapolFramesRx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.2 integer32 read-only
                     eapolFramesTx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.3 integer32 read-only
                     eapolStartFramesRx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.4 integer32 read-only
                     eapolLogoffFramesRx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.5 integer32 read-only
                     eapolRespIdFramesRx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.6 integer32 read-only
                     eapolRespFramesRx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.7 integer32 read-only
                     eapolReqIdFramesTx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.8 integer32 read-only
                     eapolReqFramesTx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.9 integer32 read-only
                     invalidEapolFramesRx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.10 integer32 read-only
                     eapLengthErrorFramesRx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.11 integer32 read-only
                     authEntersConnecting 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.12 integer32 read-only
                     authEapLogoffsWhileConnecting 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.13 integer32 read-only
                     authEntersAuthenticating 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.14 integer32 read-only
                     authSuccessesWhileAuthenticating 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.15 integer32 read-only
                     authTimeoutsWhileAuthenticating 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.16 integer32 read-only
                     authFailWhileAuthenticating 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.17 integer32 read-only
                     authReauthsWhileAuthenticating 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.18 integer32 read-only
                     authEapStartsWhileAuthenticating 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.19 integer32 read-only
                     authEapLogoffWhileAuthenticating 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.20 integer32 read-only
                     authReauthsWhileAuthenticated 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.21 integer32 read-only
                     authEapStartsWhileAuthenticated 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.22 integer32 read-only
                     authEapLogoffWhileAuthenticated 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.23 integer32 read-only
                     backendResponses 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.24 integer32 read-only
                     backendAccessChallenges 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.25 integer32 read-only
                     backendOtherRequestsToSupplicant 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.26 integer32 read-only
                     backendNonNakResponsesFromSupplicant 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.27 integer32 read-only
                     backendAuthSuccesses 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.28 integer32 read-only
                     backendAuthFails 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.29 integer32 read-only
                     lastEapolFrameVersion 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.30 integer32 read-only
                     lastEapolFrameSource 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.31 macaddress read-only
         spStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.4
         mgmtStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.5
         ntpStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9
             ntpPrimaryServerReqSent 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.1 integer32 read-only
The total number of NTP requests sent to Primary NTP Server.
             ntpPrimaryServerRespRcvd 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.2 integer32 read-only
The total number of NTP responces received from Primary NTP Server.
             ntpPrimaryServerUpdates 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.3 integer32 read-only
The total number of NTP Updates by Primary NTP Server.
             ntpSecondaryServerReqSent 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.4 integer32 read-only
The total number of NTP requests sent to Secondary NTP Server.
             ntpSecondaryServerRespRcvd 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.5 integer32 read-only
The total number of NTP responces received from Secondary NTP Server.
             ntpSecondaryServerUpdates 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.6 integer32 read-only
The total number of NTP Updates by Secondary NTP Server.
             ntpLastUpdateServer 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.7 integer read-only
The type of ntp server updated last time. Enumeration: 'none': 0, 'primary': 1, 'secondary': 2.
             ntpLastUpdateTime 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.8 displaystring read-only
The last time updated by ntp server.
             ntpClearStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.9 integer read-write
Setting this value to clear(2) clears the stats for ntp. Enumeration: 'clear': 2, 'ok': 1.
             ntpSystemCurrentTime 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.10 displaystring read-only
The current system time.
         aclPortStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10
               aclPortStatsTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1 no-access
The table of aclPort statistics.
                   aclPortStatsTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1 no-access
A row in the aclPort stats table.
                       aclPortStatsIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1.1 integer32 read-only
The aclPort index.
                       aclPortStatsHits 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1.2 counter32 read-only
Total number of hits for this ACL entry on given port
                       aclPortClearStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1.3 integer read-write
Setting this value to clear(2) clears the stats for the ACL. Enumeration: 'clear': 2, 'ok': 1.
         aclMeterPortStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11
               aclMeterPortStatsTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1 no-access
The table of aclMeterPort statistics.
                   aclMeterPortStatsTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1 no-access
A row in the aclMeterPort stats table.
                       aclMeterPortStatsIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1.1 integer32 read-only
The aclMeterPort index.
                       aclMeterPortStatsHits 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1.2 counter32 read-only
Total number of hits for this ACL Meter entry on given port
                       aclMeterPortClearStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1.3 integer read-write
Setting this value to clear(2) clears the stats for the ACL meter. Enumeration: 'clear': 2, 'ok': 1.
     agentInfo 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3
         hardware 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1
             hwPartNumber 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.1 displaystring read-only
The hardware part number of the Bladetype2 Switch.
             hwRevision 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.2 displaystring read-only
The hardware revision. If the revision is not available, a zero length string should be returned.
             hwPowerSupplyStatus 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.3 integer read-only
The status of the internal power supply. Enumeration: 'bad': 2, 'ok': 1.
             hwSensor1Temp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.4 integer32 read-only
The temperature of the rear left sensor in degrees Celsius.
             hwInsertedCubeType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.5 integer read-only
The inserted cube type. Enumeration: 'copperCube': 2, 'fiberCube': 1, 'none': 3.
         portInfo 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2
             portInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1 no-access
The table of port information.
                 portInfoTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1 no-access
A row in the port information table.
                     portInfoIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.1 integer32 read-only
The port index.
                     portInfoSpeed 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.2 integer read-only
The current operational speed of the port. Enumeration: 'mbs1000': 4, 'mbs10': 2, 'mbs100': 3, 'any': 5.
                     portInfoMode 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.3 integer read-only
The current operational mode of the port. Enumeration: 'half-duplex': 3, 'full-duplex': 2.
                     portInfoFlowCtrl 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.4 integer read-only
The current operational flow control of the port. Enumeration: 'transmit': 2, 'receive': 3, 'none': 5, 'both': 4.
                     portInfoLink 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.5 integer read-only
The current operational link status of the port. Enumeration: 'down': 2, 'disabled': 3, 'inoperative': 4, 'up': 1.
                     portInfoPhyIfDescr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.6 displaystring read-only
A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.
                     portInfoPhyIfType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.7 integer read-only
The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack. Enumeration: 'propPointToPointSerial': 22, 'frame-relay': 32, 'softwareLoopback': 24, 'rfc877-x25': 5, 'ds3': 30, 'ppp': 23, 'ddn-x25': 4, 'slip': 28, 'proteon-10Mbit': 12, 'ethernet-3Mbit': 26, 'sip': 31, 'iso88023-csmacd': 7, 'other': 1, 'sdlc': 17, 'lapb': 16, 'iso88024-tokenBus': 8, 'hyperchannel': 14, 'basicISDN': 20, 'ethernet-csmacd': 6, 'primaryISDN': 21, 'e1': 19, 'fddi': 15, 'proteon-80Mbit': 13, 'starLan': 11, 'eon': 25, 'iso88025-tokenRing': 9, 'ds1': 18, 'hdh1822': 3, 'nsip': 27, 'regular1822': 2, 'iso88026-man': 10, 'ultra': 29.
                     portInfoPhyIfMtu 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.8 integer32 read-only
The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
                     portInfoPhyIfPhysAddress 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.9 physaddress read-only
The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
                     portInfoPhyIfOperStatus 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.10 integer read-only
The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. Enumeration: 'down': 2, 'testing': 3, 'up': 1.
                     portInfoPhyIfLastChange 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.11 timeticks read-only
The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
         swKeyInfo 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.3
         agDiff 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4
             agDiffState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.2 integer read-write
When this object is read the current state is returned. idle(3) indicates that there is no diff in progess. complete(5) indicates that the last diff operation is completed. Setting the value to diff(1), will start a new diff operation Diff compares the new configuration with the current configuration and shows the pending configuration changes. Setting the value to flashdiff(1), will start a new diff operation. flashdiff compares new configuration with the flash configuration. To read the configuration changes use the agDiffTable once the state of this variable returns complete. Enumeration: 'diff': 1, 'flashdiff': 2, 'inprogress': 4, 'idle': 3, 'complete': 5.
             agDiffTableSize 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.3 integer32 read-only
The number of strings in the diff table.
             agDiffTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4 no-access
The table of URL path for URL load balancing in the current_config.
                 agDiffTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4.1 no-access
Information about an URL path for URL load balancing.
                     agDiffIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4.1.1 integer32 read-only
The table index.
                     agDiffString 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4.1.2 octet string read-only
A string in the diff table.
         agCfgDump 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5
             agCfgDumpState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.2 integer read-write
When this object is read the current state is returned. idle(2) indicates that there is no dump in progess. complete(4) indicates that the last dump operation is completed. Setting the value to dump(1), will start a new dump operation Dump will show the current configuration. To read the configuration dump use the agCfgDumpTable once the state of this variable returns complete. Once the agCfgDumpTable is read the state should be set back to 'idle' which frees the dump buffer and others can issue a dump command via SNMP. Enumeration: 'idle': 2, 'inprogress': 3, 'dump': 1, 'complete': 4.
             agCfgDumpTableSize 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.3 integer32 read-only
The number of strings in the dump table.
             agCfgDumpTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4 no-access
The table of dump strings.
                 agCfgDumpTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4.1 no-access
An entry in the dump table.
                     agCfgDumpIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4.1.1 integer32 read-only
The table index.
                     agCfgDumpString 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4.1.2 octet string read-only
A string in the dump table.
         mgmtInfo 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.6
         geaportInfo 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7
             geaportInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1 no-access
The table of gea port mapping.
                 geaportInfoTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1 no-access
An entry in the geaport table mapping.
                     geaportInfoLogicalIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1.1 integer32 read-only
The logical port index.
                     geaportInfoPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1.2 integer read-only
The GEA Port (0-based).
                     geaportInfoUnit 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1.3 integer read-only
The GEA Unit.
         ufdInfo 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8
             ufdInfoState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.1 integer read-only
Uplink Failure Detection State. Enumeration: 'disabled': 2, 'enabled': 1.
             ufdInfoLtMStatus 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.2 integer read-only
LtM Status. Enumeration: 'down': 2, 'forwarding': 3, 'up': 1, 'blocked': 4.
             ufdInfoLtMPorts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.3 octet string read-only
The LtM port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtM 0 - The represented port does not belong to LtM.
             ufdInfoLtMTrunks 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.4 octet string read-only
The LtM trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtM 0 - The represented trunk does not belong to LtM.
             ufdInfoLtDStatus 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.5 integer read-only
LtD status. Enumeration: 'autoDisabled': 2, 'up': 1.
             ufdInfoLtDPorts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.6 octet string read-only
The LtD port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtD 0 - The represented port does not belong to LtD.
             ufdInfoLtDTrunks 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.7 integer read-only
The LtD trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtD 0 - The represented trunk does not belong to LtD.
     agentOper 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4
         agPortOperTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1 no-access
The table of port operations.
             agPortOperTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1 no-access
A row in the port operations table.
                 portOperIdx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1.1 integer32 read-only
The port index.
                 portOperState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1.2 integer read-write
Enable/Disable port. Enumeration: 'disabled': 2, 'enabled': 1.
                 portOperRmon 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1.3 integer read-write
Enable/Disable RMON for port. Enumeration: 'disabled': 2, 'enabled': 1.
             portOperDot1xTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2 no-access
The table of port operations.
                 portOperDot1xTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1 no-access
A row in the port 802.1x operation table.
                     portOperDot1xIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1.1 integer32 read-only
The port index.
                     portOperDot1xReset 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1.2 integer read-write
Reinitialize 802.1x access control on port. Enumeration: 'yes': 2, 'no': 1.
                     portOperDot1xReauth 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1.3 integer read-write
Initiate reauthentication on port. Enumeration: 'yes': 2, 'no': 1.
         agNTPOper 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.2
             ntpOperSendReq 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.2.1 integer read-write
Allows the user to send requests to the NTP server. Enumeration: 'yes': 2, 'no': 1.