BKTEL-HFC862-OVTX-V11-MIB: View SNMP OID List / Download MIB

VENDOR: HUBER+SUHNER BKTEL GMBH (HFC)


 Home MIB: BKTEL-HFC862-OVTX-V11-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, BKTEL-HFC862-BASE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ovtx 1.3.6.1.4.1.7501.1.2.101
         ovtxCommon 1.3.6.1.4.1.7501.1.2.101.1
             ovtxCommonNumberOfModules 1.3.6.1.4.1.7501.1.2.101.1.1 integer read-only
Number of modules in table.
             ovtxCommonTable 1.3.6.1.4.1.7501.1.2.101.1.2 no-access
The table contains all modules of the OVTX-type in the NE
                 ovtxCommonEntry 1.3.6.1.4.1.7501.1.2.101.1.2.1 no-access
Common-Values for a module.
                     ovtxNESlot 1.3.6.1.4.1.7501.1.2.101.1.2.1.1 neslotvalue read-only
The slot number of the chassis for which this entry contains management information. Equal to: modOVTXv11UniqueID
                     ovtxCommonType 1.3.6.1.4.1.7501.1.2.101.1.2.1.2 displaystring read-only
The type of physical module. modSlotEmpty indicates an empty slot. A Value of modSlotUnknown indicates that the type of module is unknown.
                     ovtxCommonDescr 1.3.6.1.4.1.7501.1.2.101.1.2.1.3 displaystring read-write
A textual description of the module. If not available, this Value should be set to a zero length string.
                     ovtxCommonFirmwareId 1.3.6.1.4.1.7501.1.2.101.1.2.1.4 displaystring read-only
The firmware Id of the module.
                     ovtxCommonModuleWidth 1.3.6.1.4.1.7501.1.2.101.1.2.1.5 modulewidthvalue read-only
The width of the module in multiples of slots (1, 2, ...)
         ovtxStates 1.3.6.1.4.1.7501.1.2.101.2
             ovtxStatesTable 1.3.6.1.4.1.7501.1.2.101.2.1 no-access
                 ovtxStatesEntry 1.3.6.1.4.1.7501.1.2.101.2.1.1 no-access
Alarms for a module.
                     ovtxStatesOutputLow 1.3.6.1.4.1.7501.1.2.101.2.1.1.1 perceivedseverityvalue read-only
Optical output power low
                     ovtxStatesOutputHigh 1.3.6.1.4.1.7501.1.2.101.2.1.1.2 perceivedseverityvalue read-only
Optical output power high
                     ovtxStatesInputLow 1.3.6.1.4.1.7501.1.2.101.2.1.1.3 perceivedseverityvalue read-only
RF input power low (CATV input)
                     ovtxStatesLaserAging 1.3.6.1.4.1.7501.1.2.101.2.1.1.4 perceivedseverityvalue read-only
The laser is aging
                     ovtxStatesTecHigh 1.3.6.1.4.1.7501.1.2.101.2.1.1.5 perceivedseverityvalue read-only
Laser cooler limit reached
                     ovtxStatesLaserTempLow 1.3.6.1.4.1.7501.1.2.101.2.1.1.6 perceivedseverityvalue read-only
Laser temperature low
                     ovtxStatesLaserTempHigh 1.3.6.1.4.1.7501.1.2.101.2.1.1.7 perceivedseverityvalue read-only
Laser temperature high
                     ovtxStatesOmiOrRfgainLow 1.3.6.1.4.1.7501.1.2.101.2.1.1.8 perceivedseverityvalue read-only
Omi or rf-gain (depending on mode) low (CATV input)
                     ovtxStatesOmiOrRfgainHigh 1.3.6.1.4.1.7501.1.2.101.2.1.1.9 perceivedseverityvalue read-only
Omi or rf-gain (depending on mode) high (CATV input)
                     ovtxStatesPowerSupplyLeft 1.3.6.1.4.1.7501.1.2.101.2.1.1.10 perceivedseverityvalue read-only
The left (looking from front) power supply unit fails
                     ovtxStatesPowerSupplyRight 1.3.6.1.4.1.7501.1.2.101.2.1.1.11 perceivedseverityvalue read-only
The right (looking from front) power supply unit fails
                     ovtxStatesFanLeft 1.3.6.1.4.1.7501.1.2.101.2.1.1.12 perceivedseverityvalue read-only
The left (looking from front) fan unit fails
                     ovtxStatesFanRight 1.3.6.1.4.1.7501.1.2.101.2.1.1.13 perceivedseverityvalue read-only
The right (looking from front) fan unit fails
                     ovtxStatesTemperatureLow 1.3.6.1.4.1.7501.1.2.101.2.1.1.14 perceivedseverityvalue read-only
Device internal temperature low
                     ovtxStatesTemperatureHigh 1.3.6.1.4.1.7501.1.2.101.2.1.1.15 perceivedseverityvalue read-only
Device internal temperature high
                     ovtxStatesPlus3p3VLow 1.3.6.1.4.1.7501.1.2.101.2.1.1.16 perceivedseverityvalue read-only
3.3 Volt supply low
                     ovtxStatesPlus3p3VHigh 1.3.6.1.4.1.7501.1.2.101.2.1.1.17 perceivedseverityvalue read-only
3.3 Volt supply high
                     ovtxStatesPlus5VLow 1.3.6.1.4.1.7501.1.2.101.2.1.1.18 perceivedseverityvalue read-only
5 Volt supply low
                     ovtxStatesPlus5VHigh 1.3.6.1.4.1.7501.1.2.101.2.1.1.19 perceivedseverityvalue read-only
5 Volt supply high
                     ovtxStatesPlus12VLow 1.3.6.1.4.1.7501.1.2.101.2.1.1.20 perceivedseverityvalue read-only
12 Volt supply low
                     ovtxStatesPlus12VHigh 1.3.6.1.4.1.7501.1.2.101.2.1.1.21 perceivedseverityvalue read-only
12 Volt supply high
                     ovtxStatesPlus24VLow 1.3.6.1.4.1.7501.1.2.101.2.1.1.22 perceivedseverityvalue read-only
24 Volt supply low
                     ovtxStatesPlus24VHigh 1.3.6.1.4.1.7501.1.2.101.2.1.1.23 perceivedseverityvalue read-only
24 Volt supply high
                     ovtxStatesMinus5VLow 1.3.6.1.4.1.7501.1.2.101.2.1.1.24 perceivedseverityvalue read-only
-5 Volt supply low
                     ovtxStatesMinus5VHigh 1.3.6.1.4.1.7501.1.2.101.2.1.1.25 perceivedseverityvalue read-only
-5 Volt supply high
                     ovtxStatesMinus12VLow 1.3.6.1.4.1.7501.1.2.101.2.1.1.26 perceivedseverityvalue read-only
-12 Volt supply low
                     ovtxStatesMinus12VHigh 1.3.6.1.4.1.7501.1.2.101.2.1.1.27 perceivedseverityvalue read-only
-12 Volt supply high
                     ovtxStatesLaserShutdown 1.3.6.1.4.1.7501.1.2.101.2.1.1.28 perceivedseverityvalue read-only
Laser is shutdown, no optical output
                     ovtxStatesInitializing 1.3.6.1.4.1.7501.1.2.101.2.1.1.29 perceivedseverityvalue read-only
The device is initializing
                     ovtxStatesBootloader 1.3.6.1.4.1.7501.1.2.101.2.1.1.30 perceivedseverityvalue read-only
The device is running in bootloader mode without a legal application software.
                     ovtxStatesCommLoss 1.3.6.1.4.1.7501.1.2.101.2.1.1.31 perceivedseverityvalue read-only
The NEC has lost the connection to the device. Reason may be a removed or defective device. Note that this state is set by the NEC and not by the device
                     ovtxStatesInputHigh 1.3.6.1.4.1.7501.1.2.101.2.1.1.32 perceivedseverityvalue read-only
RF input power high (CATV input)
                     ovtxStatesRedundancySwitch 1.3.6.1.4.1.7501.1.2.101.2.1.1.33 perceivedseverityvalue read-only
This (redundant) device has been activated (redundancy switchover)
                     ovtxStatesSatInputLow 1.3.6.1.4.1.7501.1.2.101.2.1.1.34 perceivedseverityvalue read-only
RF input power low (SAT input) Only used if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports clear(5).
                     ovtxStatesSatInputHigh 1.3.6.1.4.1.7501.1.2.101.2.1.1.35 perceivedseverityvalue read-only
RF input power high (SAT input) Only used if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports clear(5).
                     ovtxStatesSatOmiOrRfgainLow 1.3.6.1.4.1.7501.1.2.101.2.1.1.36 perceivedseverityvalue read-only
Omi or rf-gain (depending on mode) low (SAT input) Only used if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports clear(5).
                     ovtxStatesSatOmiOrRfgainHigh 1.3.6.1.4.1.7501.1.2.101.2.1.1.37 perceivedseverityvalue read-only
Omi or rf-gain (depending on mode) high (SAT input) Only used if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports clear(5).
                     ovtxStatesSatLnbShortCircuit 1.3.6.1.4.1.7501.1.2.101.2.1.1.38 perceivedseverityvalue read-only
Short-circuit at SAT LNB Only used if ovtxDisplaySatLnbSupplySupported != notSupported(1), otherwise always reports clear(5).
                     ovtxStatesSbs1Level 1.3.6.1.4.1.7501.1.2.101.2.1.1.39 perceivedseverityvalue read-only
SBS #1 level alarm Only used if ovtxDisplaySbsExtensionsSupported == true(1), otherwise always reports clear(5).
                     ovtxStatesSbs2Level 1.3.6.1.4.1.7501.1.2.101.2.1.1.40 perceivedseverityvalue read-only
SBS #2 level alarm Only used if ovtxDisplaySbsExtensionsSupported == true(1), otherwise always reports clear(5).
                     ovtxStatesSbs1PllNotLocked 1.3.6.1.4.1.7501.1.2.101.2.1.1.41 perceivedseverityvalue read-only
SBS #1 PLL not locked Only used if ovtxDisplaySbsExtensionsSupported == true(1), otherwise always reports clear(5).
                     ovtxStatesSbs2PllNotLocked 1.3.6.1.4.1.7501.1.2.101.2.1.1.42 perceivedseverityvalue read-only
SBS #2 PLL not locked Only used if ovtxDisplaySbsExtensionsSupported == true(1), otherwise always reports clear(5).
                     ovtxStatesInternalAlarm 1.3.6.1.4.1.7501.1.2.101.2.1.1.43 perceivedseverityvalue read-only
Internal hardware failure
         ovtxConfiguration 1.3.6.1.4.1.7501.1.2.101.3
             ovtxConfigurationTable 1.3.6.1.4.1.7501.1.2.101.3.1 no-access
                 ovtxConfigurationEntry 1.3.6.1.4.1.7501.1.2.101.3.1.1 no-access
                     ovtxConfigurationNESlotWrite 1.3.6.1.4.1.7501.1.2.101.3.1.1.1 neslotwritevalue read-write
By writing this variable a slot can be assigned for devices that dont support hardware slot detection. Reading '-1' means that the slot position is NOT writable.
                     ovtxConfigurationModeAGC 1.3.6.1.4.1.7501.1.2.101.3.1.1.2 agcmode read-write
The AGC mode of the optical transmitter (CATV input).
                     ovtxConfigurationOmi 1.3.6.1.4.1.7501.1.2.101.3.1.1.3 integer read-write
The desired offset from nominal OMI in 0.1dB units (CATV input). This parameter is only used if AGC is on.
                     ovtxConfigurationRfGain 1.3.6.1.4.1.7501.1.2.101.3.1.1.4 integer read-write
The desired offset from nominal gain in 0.1dB units (CATV input). This parameter is only used if AGC is off.
                     ovtxConfigurationSbsSuppression 1.3.6.1.4.1.7501.1.2.101.3.1.1.5 integer read-write
The sbs suppression in 0.1dBm units.
                     ovtxConfigurationChannelDistance 1.3.6.1.4.1.7501.1.2.101.3.1.1.6 integer read-write
The channel raster in MHz units.
                     ovtxConfigurationLaserFrequency 1.3.6.1.4.1.7501.1.2.101.3.1.1.7 integer read-write
The laser frequency in GHz units.
                     ovtxConfigurationRfInputLimitLoLo 1.3.6.1.4.1.7501.1.2.101.3.1.1.8 integer read-write
The rf input power low alarm limit in 0.1 dBm units
                     ovtxConfigurationRfInputLimitLo 1.3.6.1.4.1.7501.1.2.101.3.1.1.9 integer read-write
The rf input power low warning limit in 0.1 dBm units
                     ovtxConfigurationRfInputLimitHi 1.3.6.1.4.1.7501.1.2.101.3.1.1.10 integer read-write
The rf input power high warning limit in 0.1 dBm units
                     ovtxConfigurationRfInputLimitHiHi 1.3.6.1.4.1.7501.1.2.101.3.1.1.11 integer read-write
The rf input power high alarm limit in 0.1 dBm units
                     ovtxConfigurationRfGainMeasuredLimitLoLo 1.3.6.1.4.1.7501.1.2.101.3.1.1.12 integer read-write
The Measured-Rf-Gain offset low alarm limit in 0.1 dB units (in AGC ON mode)
                     ovtxConfigurationRfGainMeasuredLimitLo 1.3.6.1.4.1.7501.1.2.101.3.1.1.13 integer read-write
The Measured-Rf-Gain offset low warning limit in 0.1 dB units (in AGC ON mode)
                     ovtxConfigurationRfGainMeasuredLimitHi 1.3.6.1.4.1.7501.1.2.101.3.1.1.14 integer read-write
The Measured-Rf-Gain offset high warning limit in 0.1 dB units (in AGC ON mode)
                     ovtxConfigurationRfGainMeasuredLimitHiHi 1.3.6.1.4.1.7501.1.2.101.3.1.1.15 integer read-write
The Measured-Rf-Gain offset high alarm limit in 0.1 dB units (in AGC ON mode)
                     ovtxConfigurationOmiMeasuredLimitLoLo 1.3.6.1.4.1.7501.1.2.101.3.1.1.16 integer read-write
The Measured-OMI offset low alarm limit in 0.1 dB units (in AGC OFF mode)
                     ovtxConfigurationOmiMeasuredLimitLo 1.3.6.1.4.1.7501.1.2.101.3.1.1.17 integer read-write
The Measured-OMI offset low warning limit in 0.1 dB units(in AGC OFF mode)
                     ovtxConfigurationOmiMeasuredLimitHi 1.3.6.1.4.1.7501.1.2.101.3.1.1.18 integer read-write
The Measured-OMI offset high warning limit in 0.1 dB units(in AGC OFF mode)
                     ovtxConfigurationOmiMeasuredLimitHiHi 1.3.6.1.4.1.7501.1.2.101.3.1.1.19 integer read-write
The Measured-OMI offset high alarm limit in 0.1 dB units(in AGC OFF mode)
                     ovtxConfigurationOutputPwrLimitLoLo 1.3.6.1.4.1.7501.1.2.101.3.1.1.20 integer read-write
The output power low alarm limit in 0.1 dBm units
                     ovtxConfigurationOutputPwrLimitLo 1.3.6.1.4.1.7501.1.2.101.3.1.1.21 integer read-write
The output power low warning limit in 0.1 dBm units
                     ovtxConfigurationOutputPwrLimitHi 1.3.6.1.4.1.7501.1.2.101.3.1.1.22 integer read-write
The output power high warning limit in 0.1 dBm units
                     ovtxConfigurationOutputPwrLimitHiHi 1.3.6.1.4.1.7501.1.2.101.3.1.1.23 integer read-write
The output power high alarm limit in 0.1 dBm units
                     ovtxConfigurationRedundancyMode 1.3.6.1.4.1.7501.1.2.101.3.1.1.24 redundancymode read-write
The device's redundancy mode.
                     ovtxConfigurationRedundancyMask 1.3.6.1.4.1.7501.1.2.101.3.1.1.25 redundancymask read-write
The device's redundancy mask setings.
                     ovtxConfigurationCsoRegulationMode 1.3.6.1.4.1.7501.1.2.101.3.1.1.26 csoregulationmode read-write
The desired CSO regulation mode of the optical transmitter. Only usable if ovtxDisplayExtendedCapabilities == true(1), otherwise always reports csoRegModeChannelControlled(1)
                     ovtxConfigurationSlope 1.3.6.1.4.1.7501.1.2.101.3.1.1.27 integer read-write
The desired slope in 0.1 dB units (CATV input). Only usable if ovtxDisplayExtendedCapabilities == true(1), otherwise always reports zero
                     ovtxConfigurationFiberLength 1.3.6.1.4.1.7501.1.2.101.3.1.1.28 integer read-write
The optical fiber length in meter units. Only usable if ovtxDisplayExtendedCapabilities == true(1), otherwise always reports zero
                     ovtxConfigurationSatModeAGC 1.3.6.1.4.1.7501.1.2.101.3.1.1.29 satagcmode read-write
The AGC mode of the optical transmitter (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports satAgcOff(1)
                     ovtxConfigurationSatOmi 1.3.6.1.4.1.7501.1.2.101.3.1.1.30 integer read-write
The desired offset from nominal OMI in 0.1dB units (SAT input). This parameter is only used if AGC is on. Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero
                     ovtxConfigurationSatRfGain 1.3.6.1.4.1.7501.1.2.101.3.1.1.31 integer read-write
The desired offset from nominal gain in 0.1dB units (SAT input). This parameter is only used if AGC is off. Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero
                     ovtxConfigurationSatSlope 1.3.6.1.4.1.7501.1.2.101.3.1.1.32 integer read-write
The desired slope in 0.1 dB units (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero
                     ovtxConfigurationRfInputAlarmMode 1.3.6.1.4.1.7501.1.2.101.3.1.1.33 rfinputalarmmode read-write
The RF input alarm mode (Can be used to disable alarms of unused RF inputs) Only usable if ovtxDisplayRfInputCapabilities == rfInputCatvAndSatSupported(3), otherwise always reports alarmEnableAll(1)
                     ovtxConfigurationSatLnbSupply 1.3.6.1.4.1.7501.1.2.101.3.1.1.34 lnbsupplyvalue read-write
SAT LNB supply control. This feature is not supported by all transmitter devices, see ovtxDisplaySatLnbSupplySupported
                     ovtxConfigurationSbsSuppressionMode 1.3.6.1.4.1.7501.1.2.101.3.1.1.35 sbssuppressionmodevalue read-write
SBS suppression mode. This feature is not supported by all transmitter devices, see ovtxDisplaySbsSuppressionModeSupported
                     ovtxConfigurationSbsFiberType 1.3.6.1.4.1.7501.1.2.101.3.1.1.36 sbsfibertypevalue read-write
SBS fiber type. This feature is not supported by all transmitter devices, see ovtxDisplaySbsFiberParametersSupported
                     ovtxConfigurationSbsFiberLength 1.3.6.1.4.1.7501.1.2.101.3.1.1.37 sbsfiberlengthvalue read-write
SBS suppression mode. This feature is not supported by all transmitter devices, see ovtxDisplaySbsFiberParametersSupported
         ovtxControl 1.3.6.1.4.1.7501.1.2.101.4
             ovtxControlTable 1.3.6.1.4.1.7501.1.2.101.4.1 no-access
                 ovtxControlEntry 1.3.6.1.4.1.7501.1.2.101.4.1.1 no-access
Alarms for a module.
                     ovtxControlLaserOutputMode 1.3.6.1.4.1.7501.1.2.101.4.1.1.1 laseroutputmode read-write
The output mode of the laser. NOTE: The error mask used for parameter 'laserShutdownOnMaskedError(3)' is the same mask used for external IO port, 'ovtxConfigurationRedundancyMask'
                     ovtxControlReset 1.3.6.1.4.1.7501.1.2.101.4.1.1.2 truthvalue read-write
Reset the module.
                     ovtxControlModuleLedBlink 1.3.6.1.4.1.7501.1.2.101.4.1.1.3 truthvalue read-write
Writing this variable to true(1) lets the device's modul LED blink green for 10 seconds. Writing this variable to false(2) stops blinking at once. This variable always returns false(2) on read requests
         ovtxMeasuringValues 1.3.6.1.4.1.7501.1.2.101.5
             ovtxMeasuringValuesTable 1.3.6.1.4.1.7501.1.2.101.5.1 no-access
                 ovtxMeasuringValuesEntry 1.3.6.1.4.1.7501.1.2.101.5.1.1 no-access
Common-Values for a module.
                     ovtxOmiMeasuredLoLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.1 integer read-write
Measured-OMI offset low alarm threshold in steps of 0.1dB (CATV input).
                     ovtxOmiMeasuredLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.2 integer read-write
Measured-OMI offset low warning threshold in steps of 0.1dB (CATV input).
                     ovtxOmiMeasuredValue 1.3.6.1.4.1.7501.1.2.101.5.1.1.3 integer read-only
The offset from nominal OMI in steps of 0.1dB (CATV input). If AGC is on this parameter is equal to ovtxConfigurationOmi. If AGC is off this paramters shows the Measured-OMI for the adjusted gain.
                     ovtxOmiMeasuredHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.4 integer read-write
Measured-OMI offset high warning threshold in steps of 0.1dB (CATV input).
                     ovtxOmiMeasuredHiHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.5 integer read-write
Measured-OMI offset high alarm threshold in steps of 0.1dB (CATV input).
                     ovtxRfGainMeasuredLoLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.6 integer read-write
Measured-Rf-Gain offset low alarm threshold in steps of 0.1dB (CATV input).
                     ovtxRfGainMeasuredLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.7 integer read-write
Measured-Rf-Gain offset low warning threshold in steps of 0.1dB (CATV input).
                     ovtxRfGainMeasuredValue 1.3.6.1.4.1.7501.1.2.101.5.1.1.8 integer read-only
The offset from nominal gain in steps of 0.1dB (CATV input). If AGC is off this parameter is equal to ovtxConfigurationRfGain. If AGC is on this paramters shows the Measured-Rf-Gain for the adjusted omi.
                     ovtxRfGainMeasuredHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.9 integer read-write
Measured-Rf-Gain offset high warning threshold in steps of 0.1dB (CATV input).
                     ovtxRfGainMeasuredHiHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.10 integer read-write
Measured-Rf-Gain offset high alarm threshold in steps of 0.1dB (CATV input).
                     ovtxLaserCurrentRelLoLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.11 integer read-only
Relative laser current low alarm threshold in steps of 0.1%.
                     ovtxLaserCurrentRelLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.12 integer read-only
Relative laser current low warning threshold in steps of 0.1%.
                     ovtxLaserCurrentRelValue 1.3.6.1.4.1.7501.1.2.101.5.1.1.13 integer read-only
The laser current relative to the current at begin of life in steps of 0.1%.
                     ovtxLaserCurrentRelHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.14 integer read-only
Relative laser current high warning threshold in steps of 0.1%.
                     ovtxLaserCurrentRelHiHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.15 integer read-only
Relative laser current high alarm threshold in steps of 0.1%.
                     ovtxTecCurrentRelLoLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.16 integer read-only
Thermo-electric-cooler current low alarm threshold in steps of 0.1%.
                     ovtxTecCurrentRelLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.17 integer read-only
Thermo-electric-cooler current low warning threshold in steps of 0.1%.
                     ovtxTecCurrentRelValue 1.3.6.1.4.1.7501.1.2.101.5.1.1.18 integer read-only
The thermo-electric-cooler current relative to its absolute high alarm threshold in steps of 0.1%.
                     ovtxTecCurrentRelHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.19 integer read-only
Thermo-electric-cooler current high warning threshold in steps of 0.1%.
                     ovtxTecCurrentRelHiHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.20 integer read-only
Thermo-electric-cooler current high alarm threshold in steps of 0.1%.
                     ovtxOutputPowerLoLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.21 integer read-write
Output power low alarm threshold in steps of 0.1dBm.
                     ovtxOutputPowerLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.22 integer read-write
Output power low warning threshold in steps of 0.1dBm.
                     ovtxOutputPowerValue 1.3.6.1.4.1.7501.1.2.101.5.1.1.23 integer read-only
Output power in steps of 0.1dBm.
                     ovtxOutputPowerHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.24 integer read-write
Output power high warning threshold in steps of 0.1dBm.
                     ovtxOutputPowerHiHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.25 integer read-write
Output power high alarm threshold in steps of 0.1dBm.
                     ovtxPlus3p3VLoLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.26 integer read-only
The +3.3V supply voltage low alarm threshold in steps of 0.1V.
                     ovtxPlus3p3VLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.27 integer read-only
The +3.3V supply voltage low warning threshold in steps of 0.1V.
                     ovtxPlus3p3VValue 1.3.6.1.4.1.7501.1.2.101.5.1.1.28 integer read-only
The +3.3V supply voltage in steps of 0.1V.
                     ovtxPlus3p3VHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.29 integer read-only
The +3.3V supply voltage high warning threshold in steps of 0.1V.
                     ovtxPlus3p3VHiHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.30 integer read-only
The +3.3V supply voltage high alarm threshold in steps of 0.1V.
                     ovtxPlus5VLoLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.31 integer read-only
The +5V supply voltage low alarm threshold in steps of 0.1V.
                     ovtxPlus5VLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.32 integer read-only
The +5V supply voltage low warning threshold in steps of 0.1V.
                     ovtxPlus5VValue 1.3.6.1.4.1.7501.1.2.101.5.1.1.33 integer read-only
The +5V supply voltage in steps of 0.1V.
                     ovtxPlus5VHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.34 integer read-only
The +5V supply voltage high warning threshold in steps of 0.1V.
                     ovtxPlus5VHiHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.35 integer read-only
The +5V supply voltage high alarm threshold in steps of 0.1V.
                     ovtxPlus12VLoLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.36 integer read-only
The +12V supply voltage low alarm threshold in steps of 0.1V.
                     ovtxPlus12VLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.37 integer read-only
The +12V supply voltage low warning threshold in steps of 0.1V.
                     ovtxPlus12VValue 1.3.6.1.4.1.7501.1.2.101.5.1.1.38 integer read-only
The +12V supply voltage in steps of 0.1V.
                     ovtxPlus12VHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.39 integer read-only
The +12V supply voltage high warning threshold in steps of 0.1V.
                     ovtxPlus12VHiHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.40 integer read-only
The +12V supply voltage high alarm threshold in steps of 0.1V.
                     ovtxPlus24VLoLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.41 integer read-only
The +24V supply voltage low alarm threshold in steps of 0.1V.
                     ovtxPlus24VLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.42 integer read-only
The +24V supply voltage low warning threshold in steps of 0.1V.
                     ovtxPlus24VValue 1.3.6.1.4.1.7501.1.2.101.5.1.1.43 integer read-only
The +24V supply voltage in steps of 0.1V.
                     ovtxPlus24VHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.44 integer read-only
The +24V supply voltage high warning threshold in steps of 0.1V.
                     ovtxPlus24VHiHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.45 integer read-only
The +24V supply voltage high alarm threshold in steps of 0.1V.
                     ovtxMinus5VLoLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.46 integer read-only
The -5V supply voltage low alarm threshold in steps of 0.1V.
                     ovtxMinus5VLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.47 integer read-only
The -5V supply voltage low warning threshold in steps of 0.1V.
                     ovtxMinus5VValue 1.3.6.1.4.1.7501.1.2.101.5.1.1.48 integer read-only
The -5V supply voltage in steps of 0.1V.
                     ovtxMinus5VHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.49 integer read-only
The -5V supply voltage high warning threshold in steps of 0.1V.
                     ovtxMinus5VHiHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.50 integer read-only
The -5V supply voltage high alarm threshold in steps of 0.1V.
                     ovtxMinus12VLoLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.51 integer read-only
The -12V supply voltage low alarm threshold in steps of 0.1V.
                     ovtxMinus12VLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.52 integer read-only
The -12V supply voltage low warning threshold in steps of 0.1V.
                     ovtxMinus12VValue 1.3.6.1.4.1.7501.1.2.101.5.1.1.53 integer read-only
The -12V supply voltage in steps of 0.1V.
                     ovtxMinus12VHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.54 integer read-only
The -12V supply voltage high warning threshold in steps of 0.1V.
                     ovtxMinus12VHiHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.55 integer read-only
The -12V supply voltage high alarm threshold in steps of 0.1V.
                     ovtxTemperatureLoLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.56 integer read-only
The module temperature low alarm threshold in steps of 0.1 celsius degrees.
                     ovtxTemperatureLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.57 integer read-only
The module temperature low warning threshold in steps of 0.1 celsius degrees.
                     ovtxTemperatureValue 1.3.6.1.4.1.7501.1.2.101.5.1.1.58 integer read-only
The module temperature in steps of 0.1 celsius degrees.
                     ovtxTemperatureHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.59 integer read-only
The module temperature high warning threshold in steps of 0.1 celsius degrees.
                     ovtxTemperatureHiHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.60 integer read-only
The module temperature high alarm threshold in steps of 0.1 celsius degrees.
                     ovtxRfInputLoLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.61 integer read-write
RfInput (total rms) low alarm threshold in steps of 0.1 dBm (CATV input).
                     ovtxRfInputLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.62 integer read-write
RfInput (total rms) low warning threshold in steps of 0.1 dBm (CATV input).
                     ovtxRfInputValue 1.3.6.1.4.1.7501.1.2.101.5.1.1.63 integer read-only
RfInput (total rms) in steps of 0.1 dBm (CATV input).
                     ovtxRfInputHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.64 integer read-write
RfInput (total rms) high warning threshold in steps of 0.1 dBm (CATV input).
                     ovtxRfInputHiHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.65 integer read-write
RfInput (total rms) high alarm threshold in steps of 0.1 dBm (CATV input).
                     ovtxSatRfInputLoLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.66 integer read-write
RfInput (total rms) low alarm threshold in steps of 0.1 dBm (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero.
                     ovtxSatRfInputLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.67 integer read-write
RfInput (total rms) low warning threshold in steps of 0.1 dBm (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero.
                     ovtxSatRfInputValue 1.3.6.1.4.1.7501.1.2.101.5.1.1.68 integer read-only
RfInput (total rms) in steps of 0.1 dBm (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero.
                     ovtxSatRfInputHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.69 integer read-write
RfInput (total rms) high warning threshold in steps of 0.1 dBm (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero.
                     ovtxSatRfInputHiHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.70 integer read-write
RfInput (total rms) high alarm threshold in steps of 0.1 dBm (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero.
                     ovtxSatOmiMeasuredLoLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.71 integer read-write
Measured-OMI offset low alarm threshold in steps of 0.1dB (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero.
                     ovtxSatOmiMeasuredLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.72 integer read-write
Measured-OMI offset low warning threshold in steps of 0.1dB (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero.
                     ovtxSatOmiMeasuredValue 1.3.6.1.4.1.7501.1.2.101.5.1.1.73 integer read-only
The offset from nominal OMI in steps of 0.1dB (SAT input). If SAT AGC is on this parameter is equal to ovtxConfigurationSatOmi. If SAT AGC is off this paramters shows the measured-OMI for the adjusted gain. Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero.
                     ovtxSatOmiMeasuredHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.74 integer read-write
Measured-OMI offset high warning threshold in steps of 0.1dB (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero.
                     ovtxSatOmiMeasuredHiHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.75 integer read-write
Measured-OMI offset high alarm threshold in steps of 0.1dB (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero.
                     ovtxSatRfGainMeasuredLoLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.76 integer read-write
Measured-Rf-Gain offset low alarm threshold in steps of 0.1dB (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero.
                     ovtxSatRfGainMeasuredLo 1.3.6.1.4.1.7501.1.2.101.5.1.1.77 integer read-write
Measured-Rf-Gain offset low warning threshold in steps of 0.1dB (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero.
                     ovtxSatRfGainMeasuredValue 1.3.6.1.4.1.7501.1.2.101.5.1.1.78 integer read-only
The offset from nominal gain in steps of 0.1dB (SAT input). If AGC is off this parameter is equal to ovtxConfigurationSatRfGain. If AGC is on this paramters shows the measured-Rf-Gain for the adjusted omi. Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero.
                     ovtxSatRfGainMeasuredHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.79 integer read-write
Measured-Rf-Gain offset high warning threshold in steps of 0.1dB (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero.
                     ovtxSatRfGainMeasuredHiHi 1.3.6.1.4.1.7501.1.2.101.5.1.1.80 integer read-write
Measured-Rf-Gain offset high alarm threshold in steps of 0.1dB (SAT input). Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero.
         ovtxDisplay 1.3.6.1.4.1.7501.1.2.101.6
             ovtxDisplayTable 1.3.6.1.4.1.7501.1.2.101.6.1 no-access
                 ovtxDisplayEntry 1.3.6.1.4.1.7501.1.2.101.6.1.1 no-access
                     ovtxDisplayRfInputValue 1.3.6.1.4.1.7501.1.2.101.6.1.1.1 integer read-only
RfInput (total rms) in steps of 0.1 dBm.
                     ovtxDisplayLaserFrequencyMin 1.3.6.1.4.1.7501.1.2.101.6.1.1.2 integer read-only
The minimum adjustable laser frequency in GHz units.
                     ovtxDisplayLaserFrequencyMax 1.3.6.1.4.1.7501.1.2.101.6.1.1.3 integer read-only
The maximum adjustable laser frequency in GHz units.
                     ovtxDisplayLaserFrequencyStep 1.3.6.1.4.1.7501.1.2.101.6.1.1.4 integer read-only
The supported laser frequency stepsize in GHz units.
                     ovtxDisplayOmiNominal 1.3.6.1.4.1.7501.1.2.101.6.1.1.5 integer read-only
The nominal OMI in 0.1 percent units (CATV input)
                     ovtxDisplaySatOmiNominal 1.3.6.1.4.1.7501.1.2.101.6.1.1.6 integer read-only
The nominal OMI in 0.1 percent units (SAT input) Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), otherwise always reports zero
                     ovtxDisplayRegulationState 1.3.6.1.4.1.7501.1.2.101.6.1.1.7 regulationstate read-only
The transmitters current regulation state Only usable if ovtxDisplayExtendedCapabilities == true(1), otherwise always reports regulationStateUnknownOrNotSupported(1)
                     ovtxDisplayExtendedCapabilities 1.3.6.1.4.1.7501.1.2.101.6.1.1.8 truthvalue read-only
Returns true(1) if the transmitter supports the extended features represented by the variables ovtxConfigurationCsoRegulationMode, ovtxConfigurationSlope and ovtxConfigurationFiberLength
                     ovtxDisplayRfInputCapabilities 1.3.6.1.4.1.7501.1.2.101.6.1.1.9 rfinputcapabilities read-only
Returns the transmitter supported RF input capabilities
                     ovtxDisplaySatLnbSupplySupported 1.3.6.1.4.1.7501.1.2.101.6.1.1.10 lnbsupplysupportedvalue read-only
Returns the supported SAT LNB supply features
                     ovtxDisplaySbsExtensionsSupported 1.3.6.1.4.1.7501.1.2.101.6.1.1.11 truthvalue read-only
Returns true(1) if the transmitter supports the extended SBS alarm features
                     ovtxDisplaySbsSuppressionModeSupported 1.3.6.1.4.1.7501.1.2.101.6.1.1.12 truthvalue read-only
Returns true(1) if the transmitter supports the SbsSuppressionMode configuration feature
                     ovtxDisplaySbsFiberParametersSupported 1.3.6.1.4.1.7501.1.2.101.6.1.1.13 truthvalue read-only
Returns true(1) if the transmitter supports the SbsFiber configuration feature