BIANCA-BRICK-RADIUS-MIB: View SNMP OID List / Download MIB

VENDOR: BINTEC COMMUNICATIONS GMBH


 Home MIB: BIANCA-BRICK-RADIUS-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 org 1.3
     dod 1.3.6
         internet 1.3.6.1
             private 1.3.6.1.4
                 enterprises 1.3.6.1.4.1
                     bintec 1.3.6.1.4.1.272
                             bintecsec 1.3.6.1.4.1.272.254
                                     radius 1.3.6.1.4.1.272.254.8
                                         radiusServerTable 1.3.6.1.4.1.272.254.8.1 no-access
                                             radiusServerEntry 1.3.6.1.4.1.272.254.8.1.1 no-access
                                                 radiusSrvProtocol 1.3.6.1.4.1.272.254.8.1.1.1 integer read-write
Type of authentication server. To configure the radius authentication use authentication(1), for radius accounting accounting(2), for user authentication on login shell login(3). Enumeration: 'accounting': 2, 'authentication': 1, 'login': 3.
                                                 radiusSrvAddress 1.3.6.1.4.1.272.254.8.1.1.2 ipaddress read-write
The Radius Server IP Address.
                                                 radiusSrvPort 1.3.6.1.4.1.272.254.8.1.1.3 integer read-write
The radius server port. Please notice that RFC2138 assigns port 1812 and 1813 for authentication and accounting, respectively. Many Radius servers still use the former assigned port 1645 and 1646 instead. The default value is 1812 and 1813.
                                                 radiusSrvSecret 1.3.6.1.4.1.272.254.8.1.1.4 displaystring read-write
The shared secret between radius server and Brick.
                                                 radiusSrvPriority 1.3.6.1.4.1.272.254.8.1.1.5 integer read-write
The radius server with the lowest priority is the first used for request. If there is no response (see also the values Timeout and Retries) the radius server with the next lowest priority will be used. Default value is 0.
                                                 radiusSrvTimeout 1.3.6.1.4.1.272.254.8.1.1.6 integer read-write
The amount of milliseconds (1/1000s) waiting for an outstanding request. Default is 1000 (1 second).
                                                 radiusSrvRetries 1.3.6.1.4.1.272.254.8.1.1.7 integer read-write
The number of retries sent for each request, until the server state is set to inactive. Default value is 1. To prevent the radiusSrvState ever switch to inactive, set this value to 0.
                                                 radiusSrvState 1.3.6.1.4.1.272.254.8.1.1.8 integer read-write
When operational, the server state is active(1). If the radius server does not respond, its state is set to inactive(2). The administrator can set the state manually to disabled(3), or delete(4) the entry. Enumeration: 'active': 1, 'disabled': 3, 'inactive': 2, 'delete': 4.
                                                 radiusSrvPolicy 1.3.6.1.4.1.272.254.8.1.1.9 integer read-write
If set to authoritative(1), a negative answer to a request will be accepted. This is not necessarily true when set to non-authoritative(2), where the next radius server will be asked until there is finally an authoritative(1) server configured. Enumeration: 'authoritative': 1, 'non-authoritative': 2.
                                                 radiusSrvValidate 1.3.6.1.4.1.272.254.8.1.1.10 integer read-write
This additional option is only used for bogus RADIUS servers, which send response messages with a wrong calculated MD5 checksum. All messages generated by the brick, however, will always use the proper authentication scheme. For security reasons, this option should always be set to enabled(1). Enumeration: 'disabled': 2, 'enabled': 1.
                                                 radiusSrvDialout 1.3.6.1.4.1.272.254.8.1.1.11 integer read-write
This option provides a means for RADIUS dialout configuration. When set to enabled(1), routing information is read into the brick after system startup. This information must be configured in the RADIUS server as dialout-1 to dialout-n, where n is a value of range 1-99. The end is automatically determined when the brick gets a negative response. This means, all entrys must be consecutive. The default value is disabled(2). Enumeration: 'disabled': 2, 'reload': 3, 'enabled': 1.
                                                 radiusSrvDefaultPW 1.3.6.1.4.1.272.254.8.1.1.12 displaystring read-write
This is the default USER-PASSWORD the brick sends where no password is available (for example, in requests for the calling number or boot requests). Some RADIUS servers rely on a configured USER- or CHAP-PASSWORD for any RADIUS request. The default value is an empty string.
                                                 radiusSrvReloadInterval 1.3.6.1.4.1.272.254.8.1.1.13 integer read-write
Reload interval for RADIUS dialout configuration in minutes. The default is 0 (no reload is performed automatically.
                                                 radiusSrvAuthRequests 1.3.6.1.4.1.272.254.8.1.1.14 counter read-only
Total number of access requests sent.
                                                 radiusSrvAuthAccepts 1.3.6.1.4.1.272.254.8.1.1.15 counter read-only
Total number of access accepts received.
                                                 radiusSrvAuthRejects 1.3.6.1.4.1.272.254.8.1.1.16 counter read-only
Total number of access rejects received.
                                                 radiusSrvAuthReqRetrans 1.3.6.1.4.1.272.254.8.1.1.17 counter read-only
Total number of retransmitted access requests.
                                                 radiusSrvAuthReqFailed 1.3.6.1.4.1.272.254.8.1.1.18 counter read-only
Total number of failed (not rejected) access requests.
                                                 radiusSrvAuthReqPending 1.3.6.1.4.1.272.254.8.1.1.19 counter read-only
Total number of pending access requests.
                                                 radiusSrvAcctStarts 1.3.6.1.4.1.272.254.8.1.1.20 counter read-only
Total number of accounting starts sent.
                                                 radiusSrvAcctStops 1.3.6.1.4.1.272.254.8.1.1.21 counter read-only
Total number of accounting stops sent.
                                                 radiusSrvKeepalive 1.3.6.1.4.1.272.254.8.1.1.22 integer read-write
Enables the periodicaly keep alive check of 'inactive' (see radiusSrvState) server. Enumeration: 'disabled': 2, 'enabled': 1.