BCN-NTP-MIB: View SNMP OID List / Download MIB

VENDOR: BLUECAT NETWORKS


 Home MIB: BCN-NTP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, BCN-SMI-MIB, INET-ADDRESS-MIB, BCN-TC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 bcnNtp 1.3.6.1.4.1.13315.3.1.4
     bcnNtpMIB 1.3.6.1.4.1.13315.3.1.4.1
This module provides status as well as statistical information about the NTP service. Most of the OIDs defined on this MIB are based on the work done by A.S. Sethi and Dave Mills in the University of Delaware and published as: Management of the Network Time Protocol (NTP) with SNMP Technical Report No. 98-09 Other references used in the creation of this MIB are RFC-1305 and RFC-5905
     bcnNtpObjects 1.3.6.1.4.1.13315.3.1.4.2
         bcnNtpServiceStatus 1.3.6.1.4.1.13315.3.1.4.2.1
General state of the NTP Service.
             bcnNtpSerOperState 1.3.6.1.4.1.13315.3.1.4.2.1.1 integer read-only
Operational state of the Service. The possible states are: running(1) The service is running normally. notRunning(2) The service is stopped either intentionally (i.e.: the service is not supposed to run on this node) or unintentionally (a problem has occurred). starting(3) The service is in the process of starting, either for the first time of after an event occurred. stopping(4) The service is in the process of stopping. Stopping a service might be necessary after a configuration change. fault(5) An error has been detected and the state is undefined. Enumeration: 'stopping': 4, 'fault': 5, 'running': 1, 'starting': 3, 'notRunning': 2.
         bcnNtpSystem 1.3.6.1.4.1.13315.3.1.4.2.2
General NTP system information.
             bcnNtpSysLeap 1.3.6.1.4.1.13315.3.1.4.2.2.1 ntpleapindicator read-only
Two-bit code warning of an impending leap second to be inserted in the NTP timescale.
             bcnNtpSysStratum 1.3.6.1.4.1.13315.3.1.4.2.2.2 integer32 read-only
Indicating the stratum of the local clock. 0, unspecified 1, primary reference (e.g., calibrated atomic clock, radio clock) 2-255, secondary reference (via NTP)
             bcnNtpSysPrecision 1.3.6.1.4.1.13315.3.1.4.2.2.3 integer32 read-only
Signed integer indicating the precision of the various clocks, in seconds to the nearest power of two.
             bcnNtpSysRootDelay 1.3.6.1.4.1.13315.3.1.4.2.2.4 displaystring read-only
The total roundtrip delay to the primary reference source at the root of the synchronization subnet, in seconds. This is an ASCII string representing a floating point number.
             bcnNtpSysRootDispersion 1.3.6.1.4.1.13315.3.1.4.2.2.5 displaystring read-only
The maximum error relative to the primary reference source at the root of the synchronization subnet, in seconds. Only positive values greater than zero are possible. This is an ASCII string representing a floating point number.
             bcnNtpSysRefId 1.3.6.1.4.1.13315.3.1.4.2.2.6 ntprefid read-only
The particular reference clock.
             bcnNtpSysRefTime 1.3.6.1.4.1.13315.3.1.4.2.2.7 ntptimestamp read-only
The local time when the local clock was last updated. If the local clock has never been synchronized, the value is zero.
             bcnNtpSysPoll 1.3.6.1.4.1.13315.3.1.4.2.2.8 integer32 read-only
The minimum interval between transmitted messages, in seconds as a power of two. For instance, a value of six indicates a minimum interval of 64 seconds.
             bcnNtpSysPeer 1.3.6.1.4.1.13315.3.1.4.2.2.9 unsigned32 read-only
The current synchronization source. This is the association ID of the system peer. The special value NULL indicates there is no currently valid synchronization source.
             bcnNtpSysFreq 1.3.6.1.4.1.13315.3.1.4.2.2.10 displaystring read-only
The clock frequency offset (PPM) This is an ASCII string representing a floating point number.
             bcnNtpSysClock 1.3.6.1.4.1.13315.3.1.4.2.2.11 ntptimestamp read-only
The current local time. Local time is derived from the hardware clock of the particular machine and increments at intervals depending on the design used.
             bcnNtpSysSystem 1.3.6.1.4.1.13315.3.1.4.2.2.12 displaystring read-only
The type of the local Operating System
             bcnNtpSysProcessor 1.3.6.1.4.1.13315.3.1.4.2.2.13 displaystring read-only
The type of the local Processor
             bcnNtpSysJitter 1.3.6.1.4.1.13315.3.1.4.2.2.14 displaystring read-only
Indicates how much the individual pulses vary from second to second (as measured by the operating system's clock). This is an ASCII string representing a floating point number.
         bcnNtpPeers 1.3.6.1.4.1.13315.3.1.4.2.3
NTP peers information.
             bcnNtpPeersVarTable 1.3.6.1.4.1.13315.3.1.4.2.3.1 no-access
A table listing the peers known to the server as well as summary information of their state.
                 bcnNtpPeersVarEntry 1.3.6.1.4.1.13315.3.1.4.2.3.1.1 no-access
A logical row in the bcnNtpPeersVarTable.
                     bcnNtpPeersAssocId 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.1 unsigned32 no-access
Association ID of the peer.
                     bcnNtpPeersConfigured 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.2 truthvalue read-only
This is a bit indicating that the association was created from configuration information and should not be demobilized if the peer becomes unreachable.
                     bcnNtpPeersPeerAddressType 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.3 inetaddresstype read-only
The Internet address type of the peer.
                     bcnNtpPeersPeerAddress 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.4 inetaddress read-only
The Internet address of the peer.
                     bcnNtpPeersPeerPort 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.5 inetportnumber read-only
16-bit port number of the peer.
                     bcnNtpPeersHostAddressType 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.6 inetaddresstype read-only
The Internet address type of the host.
                     bcnNtpPeersHostAddress 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.7 inetaddress read-only
The Internet address of the host.
                     bcnNtpPeersHostPort 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.8 inetportnumber read-only
16-bit port number of the host.
                     bcnNtpPeersLeap 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.9 ntpleapindicator read-only
Two-bit code warning of an impending leap second to be inserted in the NTP timescale.
                     bcnNtpPeersMode 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.10 integer read-only
The association mode,with values coded as follows: 0, unspecified 1, symmetric active 2, symmetric passive 3, client 4, server 5, broadcast 6, reserved for NTP control messages 7, reserved for private use Enumeration: 'symmetricActive': 1, 'reservedPrivate': 7, 'reservedControl': 6, 'unspecified': 0, 'server': 4, 'broadcast': 5, 'client': 3, 'symmetricPassive': 2.
                     bcnNtpPeersStratum 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.11 integer32 read-only
Indicates the stratum of the peer clock. 0, unspecified 1, primary reference (e.g., calibrated atomic clock, radio clock) 2-255, secondary reference (via NTP)
                     bcnNtpPeersPeerPoll 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.12 integer32 read-only
Poll interval of the peer
                     bcnNtpPeersHostPoll 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.13 integer32 read-only
Poll interval of the host
                     bcnNtpPeersPrecision 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.14 integer32 read-only
The same as the systemPrecision except this is for the peer.
                     bcnNtpPeersRootDelay 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.15 displaystring read-only
The same as the systemRootDealy except this is for the peer.
                     bcnNtpPeersRootDispersion 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.16 displaystring read-only
The same as the systemDispersion except this is for the peer.
                     bcnNtpPeersRefId 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.17 ntprefid read-only
The same as the systemRefid except this is for the peer.
                     bcnNtpPeersRefTime 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.18 ntptimestamp read-only
The same as the systemRefTime except this is for the peer.
                     bcnNtpPeersOrgTime 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.19 ntptimestamp read-only
The local time at the peer when its latest NTP message was sent. If the peer becomes unreachable the value is set to zero.
                     bcnNtpPeersReceiveTime 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.20 ntptimestamp read-only
The local time when the latest NTP message from the peer arrived. If the peer becomes unreachable the value is set to zero.
                     bcnNtpPeersTransmitTime 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.21 ntptimestamp read-only
The local time at which the NTP message departed the sender.
                     bcnNtpPeersReach 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.22 unsigned32 read-only
A shift register of NTP.WINDOW bits used to determine the reachability status of the peer, with bits entering from the least significant (rightmost) end. A peer is considered reachable if at least one bit in this register is set to one.
                     bcnNtpPeersOffset 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.23 displaystring read-only
Filter offset. This is an ASCII string representing a floating point number.
                     bcnNtpPeersDelay 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.24 displaystring read-only
Filter delay. This is an ASCII string representing a floating point number.
                     bcnNtpPeersDispersion 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.25 displaystring read-only
Filter dispersion. This is an ASCII string representing a floating point number.
                     bcnNtpPeersJitter 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.26 displaystring read-only
bcnNtpPeersJitter indicates how much the individual pulses vary from second to second (as measured by the operating system's clock). This is an ASCII string representing a floating point number.
     bcnNtpNotification 1.3.6.1.4.1.13315.3.1.4.3
         bcnNtpNotificationEvents 1.3.6.1.4.1.13315.3.1.4.3.0
             bcnNtpAlarmNotif 1.3.6.1.4.1.13315.3.1.4.3.0.1
A bcnNtpAlarmNotif signifies that the NTP service has transitioned state or a particular event has been detected on the service.
         bcnNtpNotificationData 1.3.6.1.4.1.13315.3.1.4.3.1
             bcnNtpAlarmSeverity 1.3.6.1.4.1.13315.3.1.4.3.1.1 bcnalarmseverity no-access
Severity classification for the alarm.
             bcnNtpAlarmInfo 1.3.6.1.4.1.13315.3.1.4.3.1.2 displaystring no-access
Descriptive information about the alarm event.
     bcnNtpConformance 1.3.6.1.4.1.13315.3.1.4.4
         bcnNtpServiceCompliances 1.3.6.1.4.1.13315.3.1.4.4.1
             bcnNtpStatusCompliance 1.3.6.1.4.1.13315.3.1.4.4.1.1
Basic conformance
         bcnNtpServiceGroups 1.3.6.1.4.1.13315.3.1.4.4.2
             bcnNtpServiceStatusGroup 1.3.6.1.4.1.13315.3.1.4.4.2.1
Status conformance.
             bcnNtpSystemGroup 1.3.6.1.4.1.13315.3.1.4.4.2.2
System variables conformance.
             bcnNtpPeersGroup 1.3.6.1.4.1.13315.3.1.4.4.2.3
Peer variables conformance.
             bcnNtpNotificationEventGroup 1.3.6.1.4.1.13315.3.1.4.4.2.4
Server statistics conformance.
             bcnNtpNotificationDataGroup 1.3.6.1.4.1.13315.3.1.4.4.2.5
Server statistics conformance.