AWCVX-MIB: View SNMP OID List / Download MIB

VENDOR: TELESYSTEMS SLW INC.


 Home MIB: AWCVX-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 aironet 1.3.6.1.4.1.522
         awcVx 1.3.6.1.4.1.522.3
The MIB module for Aironet entities. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).aironet(522).awcVx(3). This MIB provides network management support for Cisco IEEE 802.11 Wireless LAN type devices such as Access Point and Wireless Access Bridge.
             awcSystem 1.3.6.1.4.1.522.3.1
                 vxWorksVersion 1.3.6.1.4.1.522.3.1.1 displaystring read-only
The version of the underlying VxWorks operating system.
                 creationDate 1.3.6.1.4.1.522.3.1.2 displaystring read-only
The date and time the Access Point system code was initially compiled.
                 awcVxVersion 1.3.6.1.4.1.522.3.1.3 displaystring read-only
The version of the Access Point system code.
                 sysFlags 1.3.6.1.4.1.522.3.1.4 unsigned32 read-write
The VxWorks sysFlags system-configuration flags in use by the Access Point system. Not used by system code with awcVxVersion from 10.00 to 11.06.
                 languageCode 1.3.6.1.4.1.522.3.1.5 displaystring read-write
The language currently in use by the system. Max. string length is 128 octets.
                 awcDevID 1.3.6.1.4.1.522.3.1.6 unsigned32 read-only
The Aironet DDP protocol device ID of the system when using the full capabilities with which the system is licensed. Note that a system may be configured to use fewer capabilities that those for which it is licensed. For example, a Bridge may be configured for use as an Access Point.
                 awcDevIDtxt 1.3.6.1.4.1.522.3.1.7 displaystring read-only
Textual representation of awcDevID. Max. string length is 128 octets.
                 enableHTTP 1.3.6.1.4.1.522.3.1.8 truthvalue read-write
If true, the Access Point's HTTP server can accept connections from other network devices. If false, the Access Point's HTTP server will only accept connections from the Access Point's console or indirectly over TELNET.
                 enableTelnet 1.3.6.1.4.1.522.3.1.9 truthvalue read-write
If true, the Access Point's TELNET server can accept connections from other network devices. If false, all TELNET connections will be refused.
                 enableSNMP 1.3.6.1.4.1.522.3.1.10 truthvalue read-write
If true, the Access Point's SNMP agent can accept connections from other network devices. If false, all SNMP connections will be refused. Note that this can only be set to false by an SNMP management station. If false, it can only be set to true by non-SNMP means.
                 enableDnsResolver 1.3.6.1.4.1.522.3.1.11 truthvalue read-write
If true, the Access Point will attempt to resolve IP address references through all configured DNS servers and will attempt to perform reverse-lookup via all configured DNS servers when displaying IP addresses. If false, the Access Point will interpret and display only explicit numeric IP addresses.
                 enableSNTP 1.3.6.1.4.1.522.3.1.13 truthvalue read-write
If true, the Access Point will attempt to periodically update its wall-clock time via a configured SNTP server. If false, the Access Point wall-clock time must be manually adjusted.
                 enableWDB 1.3.6.1.4.1.522.3.1.14 truthvalue read-write
If true, the Access Point will enable use of the VxWorks WDB debugger upon its next reboot. If false, no WDB debugging services will be available after the next reboot. The value of enableWDB is applicable only to special diagnostic versions of the Access Point system code.
                 pingTxLen 1.3.6.1.4.1.522.3.1.15 unsigned32 read-write
The size in octets of ping packets transmitted by the Access Point. Default 64.
                 awcFirstBoot 1.3.6.1.4.1.522.3.1.16 truthvalue read-write
If true, no user-specified configuration has been saved by the Access Point since either the system left Cisco manufacturing or since the user performed a Reset All System Factory Defaults operation. If false, a change in configuration has been saved by the user. Note that configurations specified solely via boot protocols such as DHCP or BOOTP are not considered user-specified for purposes of changing awcFirstBoot.
                 awcOemOUI 1.3.6.1.4.1.522.3.1.17 macaddress read-only
The IEEE Organizationally Unique Identifier of the reseller for which this system is branded.
                 awcOemName 1.3.6.1.4.1.522.3.1.18 displaystring read-only
The full name of the reseller for which this system is branded.
                 awcOemNameShort 1.3.6.1.4.1.522.3.1.19 displaystring read-only
An abbreviated name of the reseller for which this system is branded.
                 awcOemHomeURL 1.3.6.1.4.1.522.3.1.20 displaystring read-only
The URL of the corporate HTML home page of the reseller for which this system is branded.
                 enablePSPF 1.3.6.1.4.1.522.3.1.21 truthvalue read-write
If true, Publicly-Secure Packet Forwarding mode is enabled (i.e. clients can not communicate with each other). If false, normal packet forwarding is used.
                 sysExceptionReboot 1.3.6.1.4.1.522.3.1.24 truthvalue read-write
If true, all access violations or other general faults in any task will result in a reboot of the system. If false, such errors will not result in a reboot, and thus diagnostics can be performed on the system.
                 bootblockVersion 1.3.6.1.4.1.522.3.1.25 displaystring read-only
The version of the Access Point boot block (bootstrap loader) code.
                 motherboardRevision 1.3.6.1.4.1.522.3.1.26 unsigned32 read-only
Revision number of the Access Point system motherboard.
                 enableSTP 1.3.6.1.4.1.522.3.1.27 truthvalue read-write
If true and the system is licensed with Bridge capabilities, the IEEE 802.1D Spanning Tree Protocol will be be used to control packet forwarding on all network interfaces. If false or the system is not licensed with Bridge capabilities, the system will use Access Point heuristics to control packet forwarding on all network interfaces.
                 enableRebootKey 1.3.6.1.4.1.522.3.1.28 truthvalue read-write
If true, the VxWorks Monitor Trap keystroke is enabled from the console and from Telnet. By default, this is . Entering this character initiates a warm-restart of the system. If false, the VxWorks Monitor Trap keystroke is disabled.
                 awcLocateUnit 1.3.6.1.4.1.522.3.1.29 truthvalue read-write
If true, the unit will immediately begin flashing all three of its Status LEDs with an alternating pattern of amber and off. If false, the Status LEDs operate in their normal fashion.
             bootconfigVx 1.3.6.1.4.1.522.3.2
                 bootconfigBootProtocol 1.3.6.1.4.1.522.3.2.1 integer read-write
The protocol to be used for automatic configuration at the time of system bootstrap/reboot. Options BOOTP, DHCP, or none. Enumeration: 'dhcp': 3, 'none': 1, 'bootp': 2.
                 bootconfigReadINI 1.3.6.1.4.1.522.3.2.2 integer read-write
If always, the system will attempt to read a .ini-formatted configuration file upon every reboot. If never, the system will not attempt to read a .ini file upon reboot, even if a boot protocol is in use and the boot server specifies a file to be read. If ifSpecified, the system will attempt to read a .ini file upon reboot if and only if a boot protocol is in use and the boot server explicitly specifies a file to be read. The system attempts several filenames in the process of retrieving a .ini file without error. In order, these filenames are based on the system's BOOTP- or DHCP-assigned client name, then the MIB2 sysName, then the system's IP address, then, as a last resort, the BOOTP- or DHCP-assigned boot file name. For each filename, the system attempts to read first from the designated defaultFileServer, then, if not successful, from one of either the BOOTP/DHCP server itself or bootconfigFileServerAddr (if specified by the BOOTP/DHCP server). Enumeration: 'always': 1, 'ifSpecified': 3, 'never': 2.
                 bootconfigServerConfigTimeout 1.3.6.1.4.1.522.3.2.3 unsigned32 read-write
The time in seconds which the system should wait for a configuration response from a BOOTP server before falling back to the stored configuration.
                 bootconfigMultOfferTimeout 1.3.6.1.4.1.522.3.2.4 unsigned32 read-write
The time, in seconds, which the system should wait for a better offer configuration response from a DHCP or BOOTP server before choosing the best current offer.
                 bootconfigReqLeaseDuration 1.3.6.1.4.1.522.3.2.5 unsigned32 read-write
The requested DHCP lease duration, in minutes.
                 bootconfigMinLeaseDuration 1.3.6.1.4.1.522.3.2.6 unsigned32 read-write
The minimum acceptable DHCP lease duration, in minutes.
                 bootconfigDev 1.3.6.1.4.1.522.3.2.7 displaystring read-write
Text string identifying the network device used for bootstrapping the system via BOOTP or DHCP. This is only applicable in BOOTP mode or when the system is configured as a router, when not all the network interfaces share the same ifPhysAddress.
                 bootconfigClientAddr 1.3.6.1.4.1.522.3.2.8 ipaddress read-only
IPv4 network address of this device, as determined by the BOOTP or DHCP protocol.
                 bootconfigHostAddr 1.3.6.1.4.1.522.3.2.9 ipaddress read-only
IPv4 network address of the BOOTP or DHCP server from which the configuration of this device was leased.
                 bootconfigBootFile 1.3.6.1.4.1.522.3.2.10 displaystring read-only
Name of the default boot configuration file, specified by the BOOTP or DHCP server, containing the system configuration to be utilized by this device. This is considered a default configuration file because many DHCP servers are not capable of distinguishing boot files between different clients.
                 bootconfigSubnetMask 1.3.6.1.4.1.522.3.2.11 ipaddress read-only
IPv4 network subnet mask to be used by this device, as determined by the BOOTP or DHCP protocol.
                 bootconfigGateway 1.3.6.1.4.1.522.3.2.12 ipaddress read-only
IPv4 network address of the default network gateway to be used by this device, as determined by the BOOTP or DHCP protocol.
                 bootconfigHostName 1.3.6.1.4.1.522.3.2.13 displaystring read-only
Textual name of the BOOTP or DHCP server from which the configuration of this device was leased. This should be a DNS-recognizable host name.
                 bootconfigClientName 1.3.6.1.4.1.522.3.2.14 displaystring read-only
Textual name of this device, as determined by the BOOTP or DHCP protocol. This should be a DNS-recognizable host name.
                 bootconfigNameServerTable 1.3.6.1.4.1.522.3.2.15 no-access
Table of DNS Name Servers provided by the bootconfigHostAddr Boot Server.
                       bootconfigNameServerEntry 1.3.6.1.4.1.522.3.2.15.1 no-access
An entry in bootconfigNameServerTable.
                           bootconfigNameServerPriority 1.3.6.1.4.1.522.3.2.15.1.1 integer read-only
The priority order in which a domain name server is queried. Lower values are queried first.
                           bootconfigNameServer 1.3.6.1.4.1.522.3.2.15.1.2 ipaddress read-only
The IPv4 address of a domain name server.
                 bootconfigDomainName 1.3.6.1.4.1.522.3.2.16 displaystring read-only
Name of the IP domain of which this device is a member, as determined by the BOOTP or DHCP protocol.
                 bootconfigSntpServer 1.3.6.1.4.1.522.3.2.17 ipaddress read-only
IPv4 network address of SNTP server for use by this device, as determined by the BOOTP or DHCP protocol.
                 bootconfigSaveServerResponse 1.3.6.1.4.1.522.3.2.18 truthvalue read-write
If true, the leased configuration from a boot server is saved as the new system defaults. If false, system defaults remain unchanged when a new configuration is leased.
                 bootconfigCmdInvokeIniLoad 1.3.6.1.4.1.522.3.2.19 awcinvokecommand read-write
Initiate loading of an initialization script '.ini' file from the file server into the system FLASH. Commands recognized: start.
                 bootconfigCmdStatusIniLoad 1.3.6.1.4.1.522.3.2.20 integer32 read-only
Status of the most recent command to load an initialization script '.ini' file. Possible values: 0 = Operation completed successfully (or has not taken place). 2 = The '.ini' file was not found on the file server. 12 = Insufficient memory to load the '.ini' file. 22 = Invalid '.ini' file format. 35 = File format of the '.ini' file is not supported. 68 = Operation is still in progress. Poll again later. 72 = Operation was started, but later was canceled.
                 bootconfigDhcpClassID 1.3.6.1.4.1.522.3.2.24 displaystring read-write
Specification of the DHCP Class Identifier presented by the system when requesting DHCP leases.
                 bootconfigFileServerAddr 1.3.6.1.4.1.522.3.2.25 ipaddress read-only
IPv4 network address of the file server from which to read configuration files, as determined by the BOOTP or DHCP protocol.
                 bootconfigLogServerAddr 1.3.6.1.4.1.522.3.2.26 ipaddress read-only
IPv4 network address of the host to receive SYSLOG messages, as determined by the BOOTP or DHCP protocol.
                 bootconfigBootCount 1.3.6.1.4.1.522.3.2.27 unsigned32 read-only
The number of times the system code has been restarted since the system left Cisco manufacturing.
                 bootconfigDhcpClientIdType 1.3.6.1.4.1.522.3.2.28 integer read-write
The ARP hardware type, per RFC 1700, of bootconfigDhcpClientIdValue. If it is not a hardware address (e.g. is a fully-qualified domain name), a value of 0 will be used for the DHCP Client Identifier 'htype' field. Enumeration: 'localNet': 12, 'ethernet10Mb': 1, 'experimentalEthernet3Mb': 2, 'ieee802Networks': 6, 'autonet': 10, 'localTalk': 11, 'hyperchannel': 8, 'amateurRadioAxDot25': 3, 'chaos': 5, 'arcnet': 7, 'lanstar': 9, 'nonHardware': 128, 'proteonProNetTokenRing': 4.
                 bootconfigDhcpClientIdValue 1.3.6.1.4.1.522.3.2.29 displaystring read-write
Specification of the DHCP unique client Identifier presented by the system when requesting DHCP leases.
             awcSerialDev 1.3.6.1.4.1.522.3.3
                 awcSerialConfigTable 1.3.6.1.4.1.522.3.3.1 no-access
SerialConfigTable attributes. In tabular form to allow for multiple instances on an agent.
                     awcSerialConfigEntry 1.3.6.1.4.1.522.3.3.1.1 no-access
An entry in the awcSerialConfigEntry table.
                         serialDevIndex 1.3.6.1.4.1.522.3.3.1.1.1 integer32 read-only
The index used to access rows in the awcSerialConfig table.
                         serialAdminStatus 1.3.6.1.4.1.522.3.3.1.1.2 integer read-write
The requested status of the serial port. Enumeration: 'down': 2, 'testing': 3, 'up': 1, 'error': 4.
                         serialOperStatus 1.3.6.1.4.1.522.3.3.1.1.3 integer read-only
The actual status of the serial port. Enumeration: 'down': 2, 'testing': 3, 'up': 1, 'error': 4.
                         serialBaud 1.3.6.1.4.1.522.3.3.1.1.4 unsigned32 read-write
The baud rate of the serial port.
                         serialParity 1.3.6.1.4.1.522.3.3.1.1.5 integer read-write
The parity of the serial port. Enumeration: 'even': 2, 'none': 1, 'odd': 3, 'zero': 5, 'one': 4.
                         serialDataBits 1.3.6.1.4.1.522.3.3.1.1.6 unsigned32 read-write
The number of data bits per character recognized by the serial port.
                         serialStopBits 1.3.6.1.4.1.522.3.3.1.1.7 unsigned32 read-write
The number of stop bits of the serial port.
                         serialFlowControl 1.3.6.1.4.1.522.3.3.1.1.8 integer read-write
The flow control method used by the serial port. Enumeration: 'swHwBoth': 4, 'none': 1, 'hwRtsCts': 3, 'swXonXoff': 2.
                         serialTerminalType 1.3.6.1.4.1.522.3.3.1.1.9 integer read-write
The terminal type of the serial port. Enumeration: 'teletype': 1, 'ansi': 2.
                         serialTerminalLines 1.3.6.1.4.1.522.3.3.1.1.10 unsigned32 read-write
The number of horizontal lines available on each terminal page. Default 24.
                         serialTerminalColumns 1.3.6.1.4.1.522.3.3.1.1.11 unsigned32 read-write
The number of vertical columns available on each terminal page. Default 80.
                         serialDevFd 1.3.6.1.4.1.522.3.3.1.1.12 integer32 read-only
The VxWorks I/O File Descriptor used to access the serial device.
             awcFtp 1.3.6.1.4.1.522.3.4
                 defaultFileServer 1.3.6.1.4.1.522.3.4.1 displaystring read-write
The name of the preferred file server to be used for all FTP and TFTP Put and Get operations. Max. name length is 128 octets.
                 awcFileXferProtocol 1.3.6.1.4.1.522.3.4.2 integer read-write
The protocol to be used by the system for file transfer (TFTP or FTP). Enumeration: 'ftp': 2, 'tftp': 1.
                 awcFileXferUser 1.3.6.1.4.1.522.3.4.3 displaystring read-write
The name of the user, as required by all FTP file transfers. Max. name length is 128 octets.
                 awcFileXferPassword 1.3.6.1.4.1.522.3.4.4 displaystring read-write
The password of the user, as required by all FTP file transfers. Max. password length is 128 octets.
                 awcFileXferCmdInvokeFileLoad 1.3.6.1.4.1.522.3.4.5 awcinvokecommand read-write
Initiate loading of all specified files from the file server into the system FLASH. Commands recognized: start.
                 awcFileXferCmdStatusFileLoad 1.3.6.1.4.1.522.3.4.6 integer32 read-only
Status of the most recent command to load the specified fileXferFile* files. Possible values: 0 = Operation completed successfully (or has not taken place). 2 = At least one file was not found on the file server. 12 = Insufficient memory to load all files. 22 = No file specified, or invalid file format. 35 = File format of at least one of the files is not supported. 68 = Operation is still in progress. Poll again later. 72 = Operation was started, but later was canceled.
                 awcFileXferCmdInvokeFileSave 1.3.6.1.4.1.522.3.4.7 awcinvokecommand read-write
Initiate saving of all specified fileXferFile* files to the file server from the system FLASH. Commands recognized: start.
                 awcFileXferCmdStatusFileSave 1.3.6.1.4.1.522.3.4.8 integer32 read-only
Status of the most recent command to save the specified fileXferFile* files. Possible values: 0 = Operation completed successfully (or has not taken place). 1 = Insufficient permission to save the files. 2 = A directory specified for saving at least one of the files was not found. 22 = No file specified, or invalid file format. 68 = Operation is still in progress. Poll again later. 72 = Operation was started, but later was canceled.
                 awcFileXferFileFirmwareSystem 1.3.6.1.4.1.522.3.4.9 displaystring read-write
The filename of the system firmware image. Max. string length is 128 octets.
                 awcFileXferFileFirmwareRadio0 1.3.6.1.4.1.522.3.4.10 displaystring read-write
The filename of the radio firmware image. Max. string length is 128 octets.
                 awcFileXferFileWebUI 1.3.6.1.4.1.522.3.4.11 displaystring read-write
The filename of the system Web pages image. Max. string length is 128 octets.
                 awcFileXferFileFpgaPcmcia 1.3.6.1.4.1.522.3.4.12 displaystring read-write
The filename of the FPGA image for the PCMCIA controller. Max. string length is 128 octets.
                 awcFileXferTftpPort 1.3.6.1.4.1.522.3.4.13 integer read-write
IP port number over which to perform TFTP operations. Default 69.
                 awcFileXferFtpDirectory 1.3.6.1.4.1.522.3.4.14 displaystring read-write
Directory on defaultFileServer in which files are located.
                 awcFileXferFilesFLASH 1.3.6.1.4.1.522.3.4.17 displaystring read-write
The filename of a complete FLASH firmware image for the system, including all non-configuration files within the system FLASH file system. Max. string length is 128 octets.
                 awcFileXferFileFirmwareRadio1 1.3.6.1.4.1.522.3.4.18 displaystring read-write
The filename of the radio firmware image. Max. string length is 128 octets.
             awcIfTable 1.3.6.1.4.1.522.3.5 no-access
IfTable attributes. In tabular form to allow for multiple instances on an agent.
                 awcIfEntry 1.3.6.1.4.1.522.3.5.1 no-access
An entry in the awcIfEntry table.
                     awcIfDefaultPhysAddress 1.3.6.1.4.1.522.3.5.1.1 macaddress read-only
The default, factory-assigned MAC address of the interface. Guaranteed to be unique across all IEEE 802 devices.
                     awcIfPhysAddress 1.3.6.1.4.1.522.3.5.1.2 macaddress read-write
The MAC address to be used by the interface. If awcIfDefaultPhysAddress is to be used, this is 00:00:00:00:00:00.
                     awcIfAdoptPrimaryIdentity 1.3.6.1.4.1.522.3.5.1.3 truthvalue read-write
If true, this interface adopts the identity of bootconfigDev, the primary interface. This includes MAC address, IP address, etc. This is the conventional mode of operation when operating as a transparent bridge. If false, this interface always has a unique MAC address.
                     awcIfDefaultIpAddress 1.3.6.1.4.1.522.3.5.1.4 ipaddress read-write
The default IPv4 Address of the interface. If BOOTP or DHCP is enabled, this may be overridden by the BOOTP or DHCP server.
                     awcIfDefaultIpNetMask 1.3.6.1.4.1.522.3.5.1.5 ipaddress read-write
The default IPv4 netmask of the interface. If BOOTP or DHCP is enabled, this may be overridden by the BOOTP or DHCP server.
                     awcIfIpAddress 1.3.6.1.4.1.522.3.5.1.6 ipaddress read-only
The IPv4 Address currently in use by the interface.
                     awcIfIpNetMask 1.3.6.1.4.1.522.3.5.1.7 ipaddress read-only
The IPv4 netmask currently in use by the interface.
                     awcIfMSDUMaxLength 1.3.6.1.4.1.522.3.5.1.8 unsigned32 read-only
Maximum length of the data portion of a packet for this particular interface. This is the maximum MAC Service Data Unit length, which is greater than or equal to ifMtu, depending on the configured MAC-level encapsulation.
                     awcIfOutDiscardsCoS0 1.3.6.1.4.1.522.3.5.1.9 counter32 read-only
The number of outbound packets of CoS 0 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
                     awcIfOutDiscardsCoS1 1.3.6.1.4.1.522.3.5.1.10 counter32 read-only
The number of outbound packets of CoS 1 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
                     awcIfOutDiscardsCoS2 1.3.6.1.4.1.522.3.5.1.11 counter32 read-only
The number of outbound packets of CoS 2 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
                     awcIfOutDiscardsCoS3 1.3.6.1.4.1.522.3.5.1.12 counter32 read-only
The number of outbound packets of CoS 3 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
                     awcIfOutDiscardsCoS4 1.3.6.1.4.1.522.3.5.1.13 counter32 read-only
The number of outbound packets of CoS 4 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
                     awcIfOutDiscardsCoS5 1.3.6.1.4.1.522.3.5.1.14 counter32 read-only
The number of outbound packets of CoS 5 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
                     awcIfOutDiscardsCoS6 1.3.6.1.4.1.522.3.5.1.15 counter32 read-only
The number of outbound packets of CoS 6 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
                     awcIfOutDiscardsCoS7 1.3.6.1.4.1.522.3.5.1.16 counter32 read-only
The number of outbound packets of CoS 7 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
             awc802dot11 1.3.6.1.4.1.522.3.6
                 awcDot11smt 1.3.6.1.4.1.522.3.6.1
                     awcDot11StationConfigTable 1.3.6.1.4.1.522.3.6.1.1 no-access
Station Config Table attributes. In tabular form to allow for multiple instances on an agent.
                         awcDot11StationConfigEntry 1.3.6.1.4.1.522.3.6.1.1.1 no-access
An entry in the awcDot11StationConfigTable table.
                             awcDot11StationRole 1.3.6.1.4.1.522.3.6.1.1.1.1 integer read-write
The role of this station itself within the 802.11 BSS (radio cell) of which it is a member. Enumeration: 'roleRepeater': 3, 'roleIBSS': 2, 'roleAP': 4, 'roleClient': 1.
                             awcDot11PowerManagementSubMode 1.3.6.1.4.1.522.3.6.1.1.1.2 unsigned32 read-write
When configured as roleClient, the Power Management Submode of the device.
                             awcDot11UseAWCExtensions 1.3.6.1.4.1.522.3.6.1.1.1.3 truthvalue read-write
If true, Aironet extensions to the basic 802.11 protocol are enabled. This results in better BSS performance and faster roaming. If false, only the basic 802.11 protocols are used. This ensures maximum compatibility with non-Aironet equipment.
                             awcDot11AllowAssocBroadcastSSID 1.3.6.1.4.1.522.3.6.1.1.1.4 truthvalue read-write
If true and awcDot11StationRole is either roleAP or roleRepeater, the radio will respond to Broadcast SSID Probe Requests and will broadcast its own SSID within its Beacons. If false, the radio will not respond to the Broadcast SSID and will not broadcast its SSID within Beacons.
                             awcDot11PrivacyOptionImplementedMaxRate 1.3.6.1.4.1.522.3.6.1.1.1.5 integer32 read-only
The maximum Transmit bit rate supported by the radio when using WEP encryption. Expressed in standard 802.11 increments of 500Kb/sec.
                             awcDot11DesiredBSSLength 1.3.6.1.4.1.522.3.6.1.1.1.6 integer read-only
The number of entries in awcDot11DesiredBSSTable.
                             awcDot11EnetEncapsulationDefault 1.3.6.1.4.1.522.3.6.1.1.1.7 integer read-write
The Ethernet Encapsulation Transform type used within the BSS. Either IEEE 802.1H or RFC 1042 can be utilized. IEEE 802.1H provides exceptions for the Novel IPX and AARP protocols. Enumeration: 'encap802dot1H': 1, 'encapRfc1042': 2.
                             awcDot11ForceReqFirmwareVersion 1.3.6.1.4.1.522.3.6.1.1.1.8 truthvalue read-write
If true, the radio driver will only allow operation with the specific radio firmware revision with which it was originally tested. If false, the radio driver will allow operation with the radio firmware revision with which it was tested, or any later radio firmware revision.
                             awcDot11BridgeSpacing 1.3.6.1.4.1.522.3.6.1.1.1.9 unsigned32 read-write
If this device is the root side of a Bridge configuration, this value is the distance in kilometers reported between this device and its farthest non-root Bridge.
                             awcDot11DesiredSSIDMaxAssociatedSTA 1.3.6.1.4.1.522.3.6.1.1.1.10 integer read-write
The maximum number of 802.11 Stations which may Associate with this access point through either the Broadcast SSID or through dot11DesiredSSID. If 0, the maximum number is limited only by the 802.11 standard and by any hardware or radio firmware limitations of the access point.
                             awcDot11DesiredSSIDNumAssociatedSTA 1.3.6.1.4.1.522.3.6.1.1.1.11 integer read-only
The current number of 802.11 Stations which are Associated with this access point through either the Broadcast SSID or through dot11DesiredSSID.
                             awcDot11AuxiliarySSIDLength 1.3.6.1.4.1.522.3.6.1.1.1.12 integer read-only
The maximum number of entries in awcDot11AuxiliarySSIDTable. If awcDot11MultipleSSIDPerBSSImplemented is FALSE, awcDot11AuxiliarySSIDLength must be 0.
                             awcDot11MultipleSSIDPerBSSImplemented 1.3.6.1.4.1.522.3.6.1.1.1.13 truthvalue read-only
This attribute, when TRUE, indicates that the station implementation is capable of responding to 802.11 Probe Requests for SSIDs other than dot11DesiredSSID. The default value of this attribute is FALSE.
                             awcDot11SymbolExtensionsImplemented 1.3.6.1.4.1.522.3.6.1.1.1.14 truthvalue read-only
This attribute, when TRUE, indicates that the station implementation is capable of generating Symbol, Inc. proprietary elements in its Beacons and Probe Responses. These elements enable support for Symbol Voice-over-IP (VoIP) phones. The default value of this attribute is FALSE.
                             awcDot11SymbolExtensionsEnabled 1.3.6.1.4.1.522.3.6.1.1.1.15 truthvalue read-write
Should the Radio generate Symbol, Inc. proprietary elements in its Beacons and Probe Responses in support of Symbol VoIP phones?
                             awcDot11DesiredSSIDMicAlgorithm 1.3.6.1.4.1.522.3.6.1.1.1.16 awcdot11micalgorithm read-write
Auxiliary Message Integrity Check (MIC) calculated on WEP-encoded packets of stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID.
                             awcDot11DesiredSSIDWEPKeyPermuteAlgorithm 1.3.6.1.4.1.522.3.6.1.1.1.17 awcdot11wepkeypermutealgorithm read-write
Function through which the WEP encryption key is permuted between key renewal periods for stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID.
                             awcDot11DesiredSSIDInfrastructureWGB 1.3.6.1.4.1.522.3.6.1.1.1.18 truthvalue read-write
When true, Workgroup Bridge-class devices Associated to this access point through either the Broadcast SSID or dot11DesiredSSID are provided the class of service which is provided to network infrastructure stations by their parent access point. This includes use of the 802.11 reliable multicast protocol (4-address packets for multicast). When false, Workgroup Bridge-class devices are provided the class of service which is provided to ordinary client stations.
                             awcDot11DesiredSSIDDefaultPolId 1.3.6.1.4.1.522.3.6.1.1.1.19 awcpolid read-write
Default Policy Group Identifier for stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID. A value of 0 indicates that no special policies are to be applied by default.
                             awcDot11DesiredSSIDDefaultVlanId 1.3.6.1.4.1.522.3.6.1.1.1.20 awcvlanid read-write
Default VLAN Identifier for stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID. A value of 0 indicates that either VLANs are disabled or that the default VLAN is awcNativeVlanId.
                             awcDot11DesiredSSIDEnableProxyMobileIP 1.3.6.1.4.1.522.3.6.1.1.1.21 truthvalue read-write
If true, Proxy Mobile IP is enabled for use by all stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID.
                             awcDot11InfrastructureSSID 1.3.6.1.4.1.522.3.6.1.1.1.22 integer read-write
Index of the SSID which all 802.11 infrastructure stations shall use for Association. If 0, an access point and its repeaters and other subordinate infrastructure devices will Associate through dot11DesiredSSID. If non-0, an access point and its subordinate infrastructure devices will Associate through the auxiliary SSID with awcDot11AuxSSIDIndex equal to awcDot11InfrastructureSSID.
                             awcDot11QBSSElementImplemented 1.3.6.1.4.1.522.3.6.1.1.1.23 truthvalue read-only
This attribute, when TRUE, indicates that the station implementation is capable of generating 802.11e QBSS elements in its Beacons and Probe Responses. These elements enable support for basic 802.11 Quality of Service. The default value of this attribute is FALSE.
                             awcDot11QBSSElementEnabled 1.3.6.1.4.1.522.3.6.1.1.1.24 truthvalue read-write
Should the Radio generate 802.11e QBSS elements in its Beacons and Probe Responses in support of 802.11 Quality of Service?
                             awcDot11InfrastructureSSIDExclusive 1.3.6.1.4.1.522.3.6.1.1.1.25 truthvalue read-write
Should this access point restrict all infrastructure stations to associate only through the SSID specified by awcDot11InfrastructureSSID?
                             awcDot11SendIGMPGeneralQuery 1.3.6.1.4.1.522.3.6.1.1.1.26 truthvalue read-write
Should this access point issue an IGMP General Query to all associated stations when they complete all required high-level authentication? Such an IGMP query can help configure multicast groups efficiently.
                             awcDot11NonRootMobility 1.3.6.1.4.1.522.3.6.1.1.1.27 integer read-write
This object is used to determine if the radio should look for a better parent AP in heavy traffic condition when the awcDot11StationRole is roleClient(1) or roleRepeater(3). It will look for better parent if it is mobile(1) and will not look for better parent if it is stationary(2). Enumeration: 'mobile': 1, 'stationary': 2.
                     awcDot11AuthenticationAlgorithmsTable 1.3.6.1.4.1.522.3.6.1.2 no-access
This table contains attributes to configure authentication algorithm parameters for associations through the SSID defined by IEEE802dot11-MIB dot11DesiredSSID object. It defines attributes additional to those defined in the IEEE802dot11-MIB dot11AuthenticationAlgorithmsTable. An interface may support multiple authentication algorithms. This table has an expansion dependent relationship on the ifTable. For each entry in this table, there exists at least an entry in the ifTable of ifType ieee80211(71). This table uses the dot11AuthenticationAlgorithmsIndex of the dot11AuthenticationAlgorithmsTable defined in the IEEE802dot11-MIB as the expansion index. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent.
                         awcDot11AuthenticationAlgorithmsEntry 1.3.6.1.4.1.522.3.6.1.2.1 no-access
Each entry specifies Cisco Aironet product specific authentication algorithm configuration attributes of the dot11DesiredSSID on a radio interface.
                             awcDot11AuthenticationAlgorithmsIndex 1.3.6.1.4.1.522.3.6.1.2.1.1 integer32 no-access
The auxiliary variable used to identify instances of the columnar objects in the Aironet Authentication Algorithms Table. This variable corresponds directly to the 802.11 dot11AuthenticationAlgorithmsIndex.
                             awcDot11AuthenticationRequireEAP 1.3.6.1.4.1.522.3.6.1.2.1.2 truthvalue read-write
If true, stations authenticating with the corresponding dot11AuthenticationAlgorithm must complete network-level EAP authentication before they will be unblocked. If false, stations authenticating with the corresponding dot11AuthenticationAlgorithm will be unblocked as soon as they complete the requirements of 802.11 authentication.
                             awcDot11AuthenticationDefaultUcastAllowedToGoTo 1.3.6.1.4.1.522.3.6.1.2.1.3 octet string read-write
The set of ports to which frames received from a specific port and destined for a MAC address which is not already listed in dot1dStaticTable and authenticates with the corresponding dot11AuthenticationAlgorithm, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length.
                     awcDot11WEPDefaultKeysTable 1.3.6.1.4.1.522.3.6.1.3 no-access
Extension of dot11WEPDefaultKeysTable to allow for key lengths other than 40 bits.
                         awcDot11WEPDefaultKeysEntry 1.3.6.1.4.1.522.3.6.1.3.1 no-access
An entry in the awcDot11WEPDefaultKeysTable table.
                             awcDot11WEPDefaultKeyIndex 1.3.6.1.4.1.522.3.6.1.3.1.1 integer read-only
The auxiliary variable used to identify instances of the columnar objects in the WEP Default Keys Table. The value of this variable is equal to the WEPDefaultKeyID + 1
                             awcDot11WEPDefaultKeyLen 1.3.6.1.4.1.522.3.6.1.3.1.2 integer read-write
Length in octets of awcDot11WEPDefaultKeyValue. If 0, the corresponding awcDot11WEPDefaultKeyValue is not configured.
                             awcDot11WEPDefaultKeyValue 1.3.6.1.4.1.522.3.6.1.3.1.3 wepkeytype128 read-write
A WEP default secret key value. The value is write-only (attempt to read will result in return of a zero-length string).
                     awcDot11PrivacyTable 1.3.6.1.4.1.522.3.6.1.5 no-access
Additional information about the WEP capabilities of the device. In tabular form to allow for multiple instances on an agent.
                         awcDot11PrivacyEntry 1.3.6.1.4.1.522.3.6.1.5.1 no-access
An entry in the awcDot11PrivacyTable table.
                             awcDot11WEPDefaultKeyMaxIndex 1.3.6.1.4.1.522.3.6.1.5.1.1 integer read-only
The maximum WEP Default Key index which the radio supports. Range 1..4, or 0 if the radio does not support WEP.
                             awcDot11AllowEncrypted 1.3.6.1.4.1.522.3.6.1.5.1.2 truthvalue read-write
When this attribute is true, the STA shall indicate at the MAC service interface received MSDUs regardless of the setting of the WEP subfield of the Frame Control field, so long as the dot11ExcludeUnencrypted attribute is false. The default value of this attribute shall be false.
                             awcDot11WEPKeyMaxLen 1.3.6.1.4.1.522.3.6.1.5.1.3 integer read-only
The maximum WEP Key Length which the radio supports. Range 0..16, or 0 if the radio does not support WEP. Note that, even if the radio supports more than 13 octets of key value, the current 802.11 standard only makes use of the first 13 octets.
                             awcDot11LEAPUserName 1.3.6.1.4.1.522.3.6.1.5.1.4 octet string read-write
User Name assigned to the system for use when authenticating with AAA servers.
                             awcDot11LEAPPassword 1.3.6.1.4.1.522.3.6.1.5.1.5 octet string read-write
User Password (shared secret) assigned to the system for use when authenticating with AAA servers.
                     awcDot11DesiredBSSTable 1.3.6.1.4.1.522.3.6.1.6 no-access
When the radio is not in roleAP, a list of preferred Access Points with which the radio should Associate. In tabular form to allow for multiple instances on an agent.
                         awcDot11DesiredBSSEntry 1.3.6.1.4.1.522.3.6.1.6.1 no-access
An entry in the awcDot11DesiredBSSTable table.
                             awcDot11DesiredBSSIndex 1.3.6.1.4.1.522.3.6.1.6.1.1 integer read-only
The priority order in which Preferred Access Points should be probed. Lower indices are probed first.
                             awcDot11DesiredBSS 1.3.6.1.4.1.522.3.6.1.6.1.2 macaddress read-write
The BSS identifier (MAC address) of the Access Point with which the radio should try to Associate, or 00:00:00:00:00:00 if the BSS identifier for this priority is unspecified.
                     awcDot11AuxiliarySSIDTable 1.3.6.1.4.1.522.3.6.1.7 no-access
When the radio is not in roleClient, a list of Stations which, when Associated to this system, shall always have the same AID.
                         awcDot11AuxiliarySSIDEntry 1.3.6.1.4.1.522.3.6.1.7.1 no-access
An entry in the awcDot11AuxiliarySSIDTable table.
                             awcDot11AuxSSIDIndex 1.3.6.1.4.1.522.3.6.1.7.1.1 integer read-only
Identifier of auxiliary SSIDs supported by the access point in addition to dot11DesiredSSID. Domain from 1 to awcDot11AuxiliarySSIDLength.
                             awcDot11AuxSSID 1.3.6.1.4.1.522.3.6.1.7.1.2 octet string read-write
This attribute reflects a Service Set ID recognized by the access point. The access point shall respond to Probe Requests specifying this SSID, but does not advertise this SSID in its Beacons.
                             awcDot11AuxSSIDMaxAssociatedSTA 1.3.6.1.4.1.522.3.6.1.7.1.3 integer read-write
The maximum number of 802.11 Stations which may Associate with this access point through awcDot11AuxSSID. If 0, the maximum number is limited only by the 802.11 standard and by any hardware or radio firmware limitations of the access point.
                             awcDot11AuxSSIDNumAssociatedSTA 1.3.6.1.4.1.522.3.6.1.7.1.4 integer read-only
The current number of 802.11 Stations which are Associated with this access point through awcDot11AuxSSID.
                             awcDot11AuxSSIDDefaultPolId 1.3.6.1.4.1.522.3.6.1.7.1.6 awcpolid read-write
Default Policy Group Identifier for stations Associated to this access point over awcDot11AuxSSID. A value of 0 indicates that no special policies are to be applied by default.
                             awcDot11AuxSSIDDefaultVlanId 1.3.6.1.4.1.522.3.6.1.7.1.7 awcvlanid read-write
Default VLAN Identifier for stations Associated to this access point over awcDot11AuxSSID. A value of 0 indicates that either VLANs are disabled or that the default VLAN is awcNativeVlanId.
                             awcDot11AuxSSIDEnableProxyMobileIP 1.3.6.1.4.1.522.3.6.1.7.1.8 truthvalue read-write
If true, Proxy Mobile IP is enabled for use by all stations Associated to this access point over awcDot11AuxSSID.
                     awcDot11AuxSSIDAuthAlgTable 1.3.6.1.4.1.522.3.6.1.8 no-access
This (conceptual) table of attributes shall be a set of all the Aironet-specific parameters for each authentication algorithm supported by the station for each auxiliary SSID listed in awcDot11AuxiliarySSIDTable.
                         awcDot11AuxSSIDAuthAlgEntry 1.3.6.1.4.1.522.3.6.1.8.1 no-access
An Entry (conceptual row) in the Aironet Auxiliary SSID Authentication Algorithms Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
                             awcDot11AuxSSIDAuthAlgIndex 1.3.6.1.4.1.522.3.6.1.8.1.1 integer32 no-access
The auxiliary variable used to identify instances of the columnar objects in the Aironet Auxiliary SSID Authentication Algorithms Table. This variable corresponds directly to the 802.11 dot11AuthenticationAlgorithmsIndex.
                             awcDot11AuxSSIDAuthAlgEnable 1.3.6.1.4.1.522.3.6.1.8.1.2 truthvalue read-write
If true, stations may authenticate to the SSID specified by awcDot11AuxSSIDIndex with the algorithm corresponding to dot11AuthenticationAlgorithmsIndex.
                             awcDot11AuxSSIDAuthAlgRequireEAP 1.3.6.1.4.1.522.3.6.1.8.1.3 truthvalue read-write
If true, stations authenticating to the SSID specified by awcDot11AuxSSIDIndex with the corresponding dot11AuthenticationAlgorithm must complete network-level EAP authentication before they will be unblocked. If false, stations authenticating with the corresponding dot11AuthenticationAlgorithm will be unblocked as soon as they complete the requirements of 802.11 authentication.
                             awcDot11AuxSSIDAuthAlgDefaultUcastAllowedToGoTo 1.3.6.1.4.1.522.3.6.1.8.1.4 octet string read-write
The set of ports to which frames received from a specific port and destined for a MAC address which is not already listed in dot1dStaticTable and authenticates to the SSID specified by awcDot11AuxSSIDIndex with the corresponding dot11AuthenticationAlgorithm, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length.
                     awcDot11AssignedAIDTable 1.3.6.1.4.1.522.3.6.1.9 no-access
When the radio is not functioning as a client station (i.e., awcDot11StationRole is not 'roleClient'), this is the list of AIDs which this agent will assign to the clients associating with it. An AID is assigned if the corresponding MAC address matches that of the client. This table has an expansion dependent relationship on the ifTable. For each entry in this table, there exists at least an entry in the ifTable of ifType ieee80211(71).
                         awcDot11AssignedAIDEntry 1.3.6.1.4.1.522.3.6.1.9.1 no-access
An entry in the awcDot11AssignedAIDTable table.
                             awcDot11AssignedAID 1.3.6.1.4.1.522.3.6.1.9.1.1 integer read-only
An AID which shall be reserved for the exclusive use of a single Station.
                             awcDot11AssignedSTA 1.3.6.1.4.1.522.3.6.1.9.1.2 macaddress read-write
The Station (MAC address) which, when Associated to this system, shall always be assigned awcDot11AssignedAID as its 802.11 AID.
                     awcDot11AccessPointCountersTable 1.3.6.1.4.1.522.3.6.1.10 no-access
This table includes radio statistics collected by the IEEE 802.11 radio interface. This table has a sparse dependent relationship on the ifTable. For each entry in this table, there exists an entry in the ifTable of ifType ieee80211(71).
                           awcDot11AccessPointCountersEntry 1.3.6.1.4.1.522.3.6.1.10.1 no-access
Each entry contains counters of frame transmissions and client associations for a radio interface.
                               awcDot11AssociatedStationCount 1.3.6.1.4.1.522.3.6.1.10.1.1 counter32 read-only
Total number of successful 802.11 Association Request operations to this radio of this access point since system startup.
                               awcDot11AuthenticatedStationCount 1.3.6.1.4.1.522.3.6.1.10.1.2 counter32 read-only
Total number of successful 802.11 MAC-level Authentication operations to this radio of this access point since system startup.
                               awcDot11ReassociatedStationCount 1.3.6.1.4.1.522.3.6.1.10.1.3 counter32 read-only
Total number of successful 802.11 Reassociation Request operations to this radio of this access point since system startup.
                               awcDot11RoamedStationCount 1.3.6.1.4.1.522.3.6.1.10.1.4 counter32 read-only
Total number of times that clients which had successfully (re)associated with this access point successfully reassociated with another access point since system startup.
                               awcDot11DeauthenticateCount 1.3.6.1.4.1.522.3.6.1.10.1.5 counter32 read-only
Total number of Deauthenticate frames sent over this radio of this access point since system startup.
                               awcDot11DisassociateCount 1.3.6.1.4.1.522.3.6.1.10.1.6 counter32 read-only
Total number of Disassociate frames sent over this radio of this access point since system startup.
                               awcDot11EncapPktsMMH 1.3.6.1.4.1.522.3.6.1.10.1.7 counter32 read-only
Total number of packets for which the a MIC has been requested to be calculated with the MMH algorithm before being submitted for transmission over this radio of this access point since system startup.
                               awcDot11DecapPktsMMH 1.3.6.1.4.1.522.3.6.1.10.1.8 counter32 read-only
Total number of packets received over this radio of this access point since system startup and for which a MIC has been requested to be validated with the MMH algorithm.
                               awcDot11EncapErrorsMMH 1.3.6.1.4.1.522.3.6.1.10.1.9 counter32 read-only
Total number of packets which have failed MIC calculation with the MMH algorithm before being submitted for transmission over this radio of this access point since system startup.
                               awcDot11DecapErrorsMMH 1.3.6.1.4.1.522.3.6.1.10.1.10 counter32 read-only
Total number of packets received over this radio of this access point since system startup which have failed MIC validation with the MMH algorithm.
                               awcDot11DecapExistsMMH 1.3.6.1.4.1.522.3.6.1.10.1.11 counter32 read-only
Total number of packets received over this radio of this access point since system startup which have failed MIC validation with the MMH algorithm specifically due to sequence number and duplicate packet errors.
                               awcDot11DecapAccessMMH 1.3.6.1.4.1.522.3.6.1.10.1.12 counter32 read-only
Total number of packets received over this radio of this access point since system startup which have failed MIC validation with the MMH algorithm specifically due to cryptographic key-mismatch errors.
                 awcDot11mac 1.3.6.1.4.1.522.3.6.2
                     awcDot11CountersTable 1.3.6.1.4.1.522.3.6.2.2 no-access
This table contains MAC statistics on each of IEEE 802.11 interface. This table has a sparse dependent relationship on the ifTable. For each entry in this table, there exists an entry in the ifTable of ifType ieee80211(71).
                         awcDot11CountersEntry 1.3.6.1.4.1.522.3.6.2.2.1 no-access
Each entry contains counters of frame transmissions for a radio interface.
                             awcDot11TxDeferEnergyCount 1.3.6.1.4.1.522.3.6.2.2.1.1 counter32 read-only
Total number of frames deferred transmission due to energy detect since system startup.
                             awcDot11RxMacCrcErrorCount 1.3.6.1.4.1.522.3.6.2.2.1.2 counter32 read-only
Total number of frames received with MAC CRC errors since system startup.
                             awcDot11SsidMismatchCount 1.3.6.1.4.1.522.3.6.2.2.1.3 counter32 read-only
Total number of Beacon or Probe Response frames received for which the SSID does not match dot11DesiredSSID since system startup.
                     awcDot11QoSTable 1.3.6.1.4.1.522.3.6.2.4 no-access
This (conceptual) table of attributes shall be a set of parameters for each traffic category (i.e. 802.1D priority) of packet passed over the radio.
                         awcDot11QoSEntry 1.3.6.1.4.1.522.3.6.2.4.1 no-access
An Entry (conceptual row) in the Aironet Quality of Service Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
                             awcDot11QoSCoS 1.3.6.1.4.1.522.3.6.2.4.1.1 integer no-access
The auxiliary variable used to identify instances of the columnar objects in the Aironet Quality of Service Table. This variable corresponds directly to the 802.1D traffic category ID, plus 1.
                             awcDot11QoSCWmin 1.3.6.1.4.1.522.3.6.2.4.1.2 integer read-write
802.11 CWmin of the traffic category. The value of this OID must be one of the set 0, 1, 3, 7, 15, 31, 63, 127, 255, 511, or 1023, and must be less than or equal to awcDot11QoSCWmax.
                             awcDot11QoSCWmax 1.3.6.1.4.1.522.3.6.2.4.1.3 integer read-write
802.11 CWmax of the traffic category. The value of this OID must be one of the set 1, 3, 7, 15, 31, 63, 127, 255, 511, or 1023, and must be greater than or equal to awcDot11QoSCWmin.
                 awcDot11res 1.3.6.1.4.1.522.3.6.3
                     awcDot11resAttribute 1.3.6.1.4.1.522.3.6.3.1
                         awcDot11ResourceInfoTable 1.3.6.1.4.1.522.3.6.3.1.2 no-access
Resource Info Table attributes. In tabular form to allow for multiple instances on an agent.
                             awcDot11ResourceInfoEntry 1.3.6.1.4.1.522.3.6.3.1.2.1 no-access
An entry in the awcDot11ResourceInfoTable table.
                                 awcDot11FirmwareBootstrapVersion 1.3.6.1.4.1.522.3.6.3.1.2.1.1 displaystring read-only
The firmware version of the radio boot block. Max. string length is 128 octets.
                 awcDot11phy 1.3.6.1.4.1.522.3.6.4
                     awcDot11PhyOperationTable 1.3.6.1.4.1.522.3.6.4.1 no-access
awcDot11PhyOperationTable attributes. In tabular form to allow for multiple instances on an agent.
                         awcDot11PhyOperationEntry 1.3.6.1.4.1.522.3.6.4.1.1 no-access
An entry in the awcDot11PhyOperationTable table.
                             awcDot11CurrentCarrierSet 1.3.6.1.4.1.522.3.6.4.1.1.1 integer read-only
The carrier set of the device. The Carrier Set implies a Regulatory Domain, but geographic-specific restrictions within a Regulatory Domain may necessitate several Carrier Sets within the Regulatory Domain. Enumeration: 'europe': 1, 'canada': 7, 'israel': 6, 'australia': 8, 'usa5GHz': 11, 'singapore5GHz': 14, 'usa': 0, 'europe5GHz': 12, 'france': 4, 'china': 16, 'belgium': 5, 'japan': 2, 'taiwan5GHz': 15, 'japanWide': 9, 'spain': 3, 'japan5GHz': 13.
                             awcDot11ModulationType 1.3.6.1.4.1.522.3.6.4.1.1.2 integer read-write
The RF modulation of the radio. Enumeration: 'mok': 2, 'standard': 1.
                             awcDot11PreambleType 1.3.6.1.4.1.522.3.6.4.1.1.3 integer read-write
The current radio preamble type in use by the Station. Possible values: 1 = Use long preambles whenever possible. 2 = Use only short preambles. Enumeration: 'short': 2, 'long': 1.
                             awcDot11PHYType 1.3.6.1.4.1.522.3.6.4.1.1.5 integer read-only
This is an 8-bit integer value that identifies the PHY type supported by the attached PLCP and PMD. Currently defined values and their corresponding PHY types are: FHSS 2.4 GHz = 01 , DSSS 2.4 GHz = 02, IR Baseband = 03, DSSS 5.0 GHz = 11 Enumeration: 'fhss': 1, 'dsssDot11A': 11, 'dsss': 2, 'irbaseband': 3.
                     awcDot11PhyFHSSTable 1.3.6.1.4.1.522.3.6.4.4 no-access
awcDot11PhyFHSSTable attributes. In tabular form to allow for multiple instances on an agent.
                         awcDot11PhyFHSSEntry 1.3.6.1.4.1.522.3.6.4.4.1 no-access
An entry in the awcDot11PhyFHSSTable table.
                             awcDot11Compatible3100 1.3.6.1.4.1.522.3.6.4.4.1.1 truthvalue read-write
Boolean on whether or not the Station should use 1Mb/sec management frames to be compatible with Aironet 3100 series radios.
                     awcDot11PhyDSSSTable 1.3.6.1.4.1.522.3.6.4.5 no-access
awcDot11PhyDSSSTable attributes. In tabular form to allow for multiple instances on an agent.
                         awcDot11PhyDSSSEntry 1.3.6.1.4.1.522.3.6.4.5.1 no-access
An entry in the awcDot11PhyDSSSTable table.
                             awcDot11Compatible4500 1.3.6.1.4.1.522.3.6.4.5.1.1 truthvalue read-write
Boolean on whether or not the Station should use 2Mb/sec management frames to be compatible with Aironet 4500 series radios.
                             awcDot11ChannelAutoImplemented 1.3.6.1.4.1.522.3.6.4.5.1.2 truthvalue read-only
If true, the radio can, when awcDot11StationRole is roleAP, scan for other BSS activity on all channels available in the current awcDot11CurrentCarrierSet before establishing its own BSS. If false, the radio can only establish its BSS on dot11CurrentChannel.
                             awcDot11ChannelAutoEnabled 1.3.6.1.4.1.522.3.6.4.5.1.3 truthvalue read-write
If true and awcDot11StationRole is roleAP, the radio will scan for other BSS activity on all channels available in the current awcDot11CurrentCarrierSet before establishing its own BSS. After the scan, this station will establish its own BSS on the channel it considers to have the least probability of congestion. If false, this station always establishes its BSS on dot11CurrentChannel.
                             awcDot11CurrentChannel 1.3.6.1.4.1.522.3.6.4.5.1.4 integer read-only
The current operating frequency channel of the DSSS PHY, as selected either by selective scanning or via dot11CurrentChannel. Valid channel numbers are as defined in 15.4.6.2
                     awcDot11SupportedDataRatesPrivacyTable 1.3.6.1.4.1.522.3.6.4.11 no-access
For each transmit and receive bit rate, whether or not the radio can support WEP encryption at that rate.
                           awcDot11SupportedDataRatesPrivacyEntry 1.3.6.1.4.1.522.3.6.4.11.1 no-access
An Entry (conceptual row) in the awcDot11SupportedDataRatesPrivacy Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
                               awcDot11SupportedDataRatesPrivacyIndex 1.3.6.1.4.1.522.3.6.4.11.1.1 integer32 read-only
Index object which identifies which data rate to access. Range is 1..8.
                               awcDot11SupportedDataRatesPrivacyValue 1.3.6.1.4.1.522.3.6.4.11.1.2 integer32 read-only
The receive or transmit bit rates supported by the PLCP and PMD, represented by a count from X02-X7f, corresponding to data rates in increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s.
                               awcDot11SupportedDataRatesPrivacyImplemented 1.3.6.1.4.1.522.3.6.4.11.1.3 truthvalue read-only
Whether or not WEP encryption is supported by the radio for both Transmit and Receive operations at the corresponding bit rate specified by awcDot11SupportedDataRatesPrivacyValue.
                     awcDot11ChanSelectTable 1.3.6.1.4.1.522.3.6.4.12 no-access
This table specifies for each 802.11 channel, whether the scanning process controlled by the awcDot11ChannelAutoEnabled can select a particular channel for use. This table has an expansion dependent relationship on the ifTable. For each entry in this table, there exists at least an entry in the ifTable of ifType ieee80211(71). Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent.
                           awcDot11ChanSelectEntry 1.3.6.1.4.1.522.3.6.4.12.1 no-access
Each entry specifies if a particular radio channel is enabled on a radio interface.
                               awcDot11ChanSelectChannel 1.3.6.1.4.1.522.3.6.4.12.1.1 integer read-only
802.11 channel which is a candidate for low-occupancy scanning.
                               awcDot11ChanSelectEnable 1.3.6.1.4.1.522.3.6.4.12.1.2 truthvalue read-write
If true, awcDot11ChanSelectChannel is available for the system to use as its awcDot11CurrentChannel after scanning for channel occupancy. If false, awcDot11ChanSelectChannel is not available.
             awcUserMgr 1.3.6.1.4.1.522.3.7
                 userMgrConfigTable 1.3.6.1.4.1.522.3.7.1 no-access
System User attributes.
                     userMgrConfigEntry 1.3.6.1.4.1.522.3.7.1.1 no-access
An entry in the user manager table.
                         userMgrUserIndex 1.3.6.1.4.1.522.3.7.1.1.1 unsigned32 read-only
The index of the user.
                         userMgrUserName 1.3.6.1.4.1.522.3.7.1.1.2 displaystring read-only
The name of the user. This should be unique across all users. Max. string length is 32 octets.
                         userMgrPassword 1.3.6.1.4.1.522.3.7.1.1.3 octet string read-only
The SHA-1 hashed password of the user in the user manager. When a plaintext password is written, it is automatically replaced by the SHA-1 Secure Hash of that plaintext, prefixed by a 4-octet magic cookie. Max. string length is 24 octets.
                         userMgrCapabilities 1.3.6.1.4.1.522.3.7.1.1.4 unsigned32 read-only
Bitmask of the capabilities of the user. The value may be any combination (sum) of the following capability values: 0 = none 1 = Administrator 2 = Write 4 = Firmware Update 8 = Identity Update 16 = SNMP Community
                         userMgrStatus 1.3.6.1.4.1.522.3.7.1.1.5 rowstatus read-only
Row status of the user. Allows deletion via SNMP.
                 enableUserMgr 1.3.6.1.4.1.522.3.7.2 truthvalue read-write
If true, the User Manager subsystem is active. Web page, console, and SNMP access is restricted in accordance with userMgrCapabilities. If false, all users have full access to the system.
                 allowBrowseWithoutLogin 1.3.6.1.4.1.522.3.7.3 truthvalue read-write
If true, the HTTP user interface to read-only web pages can be accessed without passing HTTP authentication. If false, any HTTP access requires the user to pass HTTP authentication.
                 protectLegalPage 1.3.6.1.4.1.522.3.7.4 truthvalue read-write
Should the legal credits page be protected or not.
             awcHttpd 1.3.6.1.4.1.522.3.8
                 defaultWebRoot 1.3.6.1.4.1.522.3.8.1 displaystring read-write
File directory which contains the system's web site root file index.shm. Max. string length is 128 octets.
                 defaultHelpRoot 1.3.6.1.4.1.522.3.8.2 displaystring read-write
URL identifying the directory in which help pages for the system are located. This URL is prefixed to all help page links. Max. string length is 128 octets.
                 getWebUI 1.3.6.1.4.1.522.3.8.3 displaystring read-write
The name of an auxilliary set of HTML user interface files to be loaded at system boot time from defaultFileServer. Archive formats accepted include .tar and .tar.gz. Max. string length is 128 octets.
                 cmdInvokeGetWebUI 1.3.6.1.4.1.522.3.8.4 awcinvokecommand read-write
Initiate loading of the getWebUI file. Commands recognized: start.
                 cmdStatusGetWebUI 1.3.6.1.4.1.522.3.8.5 integer32 read-only
Status of the most recent command to load the auxilliary web User Interface pages. Possible values: 0 = Operation completed successfully (or has not taken place). 2 = File not found on the file server. 12 = Insufficient memory to load all files. 20 = Identifier encountered while decoding is an ordinary file, not a directory. 22 = No file specified, or invalid file format. 35 = File format is not supported. 68 = Operation is still in progress. Poll again later. 72 = Operation was started, but later was canceled.
                 awcHttpdPort 1.3.6.1.4.1.522.3.8.6 integer read-write
IP port number over which to perform HTTP operations.
                 awcConsoleAutoApply 1.3.6.1.4.1.522.3.8.7 truthvalue read-write
The current state of 'auto apply' mode on the console browser.
             awcDnsRes 1.3.6.1.4.1.522.3.9
                 resolverDomain 1.3.6.1.4.1.522.3.9.1 displaystring read-only
The name of the resolver domain currently in use by the system. Max. string length of 128 octets.
                 resolverDomainSuffix 1.3.6.1.4.1.522.3.9.2 displaystring read-write
The suffix name of the resolver domain. Used to abbreviate displayed host names. Max. string length is 128 octets.
                 resolverDomainServerTable 1.3.6.1.4.1.522.3.9.3 no-access
Table of DNS Name Servers currently in use by the system.
                     resolverDomainServerEntry 1.3.6.1.4.1.522.3.9.3.1 no-access
An entry in resolverDomainServerTable.
                         resolverDomainServerPriority 1.3.6.1.4.1.522.3.9.3.1.1 integer read-only
The priority order in which a domain name server is queried.
                         resolverDomainServer 1.3.6.1.4.1.522.3.9.3.1.2 displaystring read-only
The IP Address of a domain name server currently in use by the system.
                 defaultResolverDomain 1.3.6.1.4.1.522.3.9.4 displaystring read-write
The name of the resolver domain to be used by the system unless overridden by a BOOTP or DHCP server. Max. string length of 128 octets.
                 defaultResolverDomainServerTable 1.3.6.1.4.1.522.3.9.5 no-access
Table of DNS Name Servers to be used by the system unless overridden by a BOOTP or DHCP server.
                     defaultResolverDomainServerEntry 1.3.6.1.4.1.522.3.9.5.1 no-access
An entry in defaultResolverDomainServerTable.
                         defaultResolverDomainServerPriority 1.3.6.1.4.1.522.3.9.5.1.1 integer read-only
The priority order in which a domain name server is queried.
                         defaultResolverDomainServer 1.3.6.1.4.1.522.3.9.5.1.2 displaystring read-write
The IP Address of a domain name server to be used by the system unless overridden by a BOOTP or DHCP server.
             awcSnmp 1.3.6.1.4.1.522.3.10
                   snmpTrapDest 1.3.6.1.4.1.522.3.10.1 displaystring read-write
The destination of an SNMP trap. This may be any DNS-recognizable IP address. Max. string length is 128 octets.
                   snmpTrapCommunity 1.3.6.1.4.1.522.3.10.2 displaystring read-write
The community name of the trap. Max. string length is 128 octets.
             awcSntp 1.3.6.1.4.1.522.3.11
                   defaultSntpServer 1.3.6.1.4.1.522.3.11.1 displaystring read-write
The name of the SNTP server to be use by the system, unless overridden by a BOOTP or DHCP server. Max. string length is 128 octets.
                   sntpServer 1.3.6.1.4.1.522.3.11.2 displaystring read-only
The name of the SNTP server currently in use by the system. Max. string length is 128 octets.
             awcForwardTbl 1.3.6.1.4.1.522.3.12
                   awcFtStatistics 1.3.6.1.4.1.522.3.12.1
                       awcFtMcastAddr 1.3.6.1.4.1.522.3.12.1.1 integer32 read-only
Count of multicast addresses observed by the system.
                       awcFtDsHost 1.3.6.1.4.1.522.3.12.1.3 integer32 read-only
Count of DS (infrastructure) host addresses observed by the system over its own DS network interface (Ethernet).
                       awcFtBridgeHost 1.3.6.1.4.1.522.3.12.1.5 integer32 read-only
Count of DS (infrastructure) host addresses observed by the system on the remote side of a bridge.
                       awcFtClientSTA 1.3.6.1.4.1.522.3.12.1.7 integer32 read-only
Count of Client Station addresses observed by the system.
                       awcFtClientSTASelf 1.3.6.1.4.1.522.3.12.1.8 integer32 read-only
Count of Client Stations which are Associated to the system.
                       awcFtBridge 1.3.6.1.4.1.522.3.12.1.9 integer32 read-only
Count of non-root Bridge addresses observed by the system.
                       awcFtBridgeSelf 1.3.6.1.4.1.522.3.12.1.10 integer32 read-only
Count of non-root Bridges which are Associated to the system.
                       awcFtRepeater 1.3.6.1.4.1.522.3.12.1.11 integer32 read-only
Count of Repeater addresses observed by the system.
                       awcFtRepeaterSelf 1.3.6.1.4.1.522.3.12.1.12 integer32 read-only
Count of Repeater devices which are Associated to the system.
                       awcFtAccessPoint 1.3.6.1.4.1.522.3.12.1.13 integer32 read-only
Count of Access Point addresses observed by the system.
                       awcFtBridgeRoot 1.3.6.1.4.1.522.3.12.1.15 integer32 read-only
Count of Root Bridge addresses observed by the system.
                   awcFtConfig 1.3.6.1.4.1.522.3.12.2
                       awcFtMaxNumEntries 1.3.6.1.4.1.522.3.12.2.1 integer32 read-write
The maximum number of entries in the forwarding table. Must be a power of 2 from 1024 to 65536. The number of entries controls the size of the forwarding table and the hash algorithm used by the forwarding table. Changing the number of entries requires a system reboot.
                       awcFtTimeoutSecUnknown 1.3.6.1.4.1.522.3.12.2.2 unsigned32 read-write
The default number of seconds an Entry with awcTpFdbClassID=unknown will remain in the Forwarding Table before being staled-out.
                       awcFtTimeoutSecMcastAddr 1.3.6.1.4.1.522.3.12.2.3 unsigned32 read-write
The default number of seconds an Entry with awcTpFdbClassID=multicast will remain in the Forwarding Table before being staled-out.
                       awcFtTimeoutSecDsHost 1.3.6.1.4.1.522.3.12.2.4 unsigned32 read-write
The default number of seconds an Entry with awcTpFdbClassID=dsHost will remain in the Forwarding Table before being staled-out.
                       awcFtTimeoutSecBridgeHost 1.3.6.1.4.1.522.3.12.2.5 unsigned32 read-write
The default number of seconds an Entry with awcTpFdbClassID=bridgeHost will remain in the Forwarding Table before being staled-out.
                       awcFtTimeoutSecClientSTA 1.3.6.1.4.1.522.3.12.2.6 unsigned32 read-write
The default number of seconds an Entry with awcTpFdbClassID=clientStation will remain in the Forwarding Table before being staled-out.
                       awcFtTimeoutSecBridge 1.3.6.1.4.1.522.3.12.2.7 unsigned32 read-write
The default number of seconds an Entry with awcTpFdbClassID=bridge will remain in the Forwarding Table before being staled-out.
                       awcFtTimeoutSecRepeater 1.3.6.1.4.1.522.3.12.2.8 unsigned32 read-write
The default number of seconds an Entry with awcTpFdbClassID=repeater will remain in the Forwarding Table before being staled-out.
                       awcFtTimeoutSecAccessPoint 1.3.6.1.4.1.522.3.12.2.9 unsigned32 read-write
The default number of seconds an Entry with awcTpFdbClassID=accessPoint will remain in the Forwarding Table before being staled-out.
                       awcFtTimeoutSecBridgeRoot 1.3.6.1.4.1.522.3.12.2.10 unsigned32 read-write
The default number of seconds an Entry with awcTpFdbClassID=bridgeRoot will remain in the Forwarding Table before being staled-out.
                       awcFtEnableAwcTpFdbTable 1.3.6.1.4.1.522.3.12.2.11 truthvalue read-write
If true, the system will populate the awcTpFdbEntry MIB for all forwarding table entries. This improves management statistics. If false, the system will not populate the awcTpFdbEntry MIB for any forwarding table entries. This improves speed and memory utilization.
                       awcFtEnableMacAuthServer 1.3.6.1.4.1.522.3.12.2.12 truthvalue read-write
If true, the system will contact a AAA server for retrieving dot1dStaticTable information for new forwarding table entries if a dot1dStaticTable entry does not already exist for the host address.
                       awcFtRogueApAlertTimeout 1.3.6.1.4.1.522.3.12.2.13 integer read-write
The minimum number of minutes after a Possible Rogue status is reported about a device before another Possible Rogue status report is issued by this system about the same device.
                       awcFtEnableMacOrEapAuth 1.3.6.1.4.1.522.3.12.2.14 truthvalue read-write
If true, the system grants full access to those clients which have successfully completed either MAC or EAP authentication.
                       awcFtDot1dTpFdbTableEnable 1.3.6.1.4.1.522.3.12.2.15 truthvalue read-write
If true, the system will populate the dot1dTpFdbEntry MIB for all forwarding table entries. This improves management statistics. If false, the system will not populate the dot1dTpFdbEntry MIB for any forwarding table entries. This improves speed and memory utilization.
                       awcFtEnableMcastMapping 1.3.6.1.4.1.522.3.12.2.16 truthvalue read-write
If true, the system will map multicast forwarding table entries to the broadcast entry. This improves speed and memory utilization. If false, the system will create an entry for each unique multicast address. This improves management statistics and allows filtering of specific multicast addresses.
                   awcTpFdbTable 1.3.6.1.4.1.522.3.12.3 no-access
A table that contains information about entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function for maintaining statistics about each entry.
                       awcTpFdbEntry 1.3.6.1.4.1.522.3.12.3.1 no-access
Information about a specific MAC address for which the bridge has some forwarding and/or filtering information.
                           awcTpFdbAddress 1.3.6.1.4.1.522.3.12.3.1.1 macaddress read-only
A MAC address for which the bridge has forwarding and/or filtering information.
                           awcTpFdbClassID 1.3.6.1.4.1.522.3.12.3.1.2 awctpfdbclassid read-only
Observed general 802.11 classification of the entry.
                           awcTpFdbSrcPktsImmed 1.3.6.1.4.1.522.3.12.3.1.3 counter32 read-only
Number of observed packets for which this entry was the source.
                           awcTpFdbSrcOctetsImmed 1.3.6.1.4.1.522.3.12.3.1.4 counter32 read-only
Number of observed octets for which this entry was the source.
                           awcTpFdbSrcErrorPktsImmed 1.3.6.1.4.1.522.3.12.3.1.5 counter32 read-only
Number of observed error packets for which this entry was the source.
                           awcTpFdbSrcErrorOctetsImmed 1.3.6.1.4.1.522.3.12.3.1.6 counter32 read-only
Number of observed error octets for which this entry was the source.
                           awcTpFdbDestPktsImmed 1.3.6.1.4.1.522.3.12.3.1.7 counter32 read-only
Number of observed packets for which this entry was the destination.
                           awcTpFdbDestOctetsImmed 1.3.6.1.4.1.522.3.12.3.1.8 counter32 read-only
Number of observed octets for which this entry was the destination.
                           awcTpFdbDestErrorPktsImmed 1.3.6.1.4.1.522.3.12.3.1.9 counter32 read-only
Number of observed error packets for which this entry was the destination. This count includes awcTpFdbDestMaxRetryErrorsImmed.
                           awcTpFdbDestErrorOctetsImmed 1.3.6.1.4.1.522.3.12.3.1.10 counter32 read-only
Number of observed error octets for which this entry was the destination.
                           awcTpFdbDestMaxRetryErrorsImmed 1.3.6.1.4.1.522.3.12.3.1.11 counter32 read-only
Number of observed max-retry error packets for which this entry was the destination.
                           awcTpFdbIPv4Addr 1.3.6.1.4.1.522.3.12.3.1.16 ipaddress read-only
Observed IPv4 network address of the entry.
                   awcTpFdbDdpTable 1.3.6.1.4.1.522.3.12.4 no-access
A table that contains information about entries for which the bridge has forwarding and/or filtering information. This table maintains only Aironet-specific information about each entry.
                       awcTpFdbDdpEntry 1.3.6.1.4.1.522.3.12.4.1 no-access
Information about a specific MAC address for which the bridge has some forwarding and/or filtering information.
                           awcTpFdbDdpAddress 1.3.6.1.4.1.522.3.12.4.1.1 macaddress read-only
A MAC address for which the bridge has forwarding and/or filtering information.
                           awcTpFdbDdpSysName 1.3.6.1.4.1.522.3.12.4.1.2 displaystring read-only
The Aironet DDP System Name of the entry.
                           awcTpFdbDdpProdDevID 1.3.6.1.4.1.522.3.12.4.1.3 awcddpproddevid read-only
The Aironet DDP Product Device ID of the entry.
                           awcTpFdbDdpRadioDevID 1.3.6.1.4.1.522.3.12.4.1.4 awcddpradiodevid read-only
The Aironet DDP Radio Device ID of the entry.
                           awcTpFdbDdpSwVerMajor 1.3.6.1.4.1.522.3.12.4.1.5 integer read-only
The Aironet DDP Major Software Version Number of the entry. If unknown, the value 0 is returned.
                           awcTpFdbDdpSwVerMinor 1.3.6.1.4.1.522.3.12.4.1.6 integer read-only
The Aironet DDP Minor Software Version Number of the entry.
                           awcTpFdbDdpSwVerBeta 1.3.6.1.4.1.522.3.12.4.1.7 integer read-only
The Aironet DDP Beta Software Version Number of the entry. This number is always 0 for officially-released software.
                           awcTpFdbDdpUptime 1.3.6.1.4.1.522.3.12.4.1.8 unsigned32 read-only
The time in seconds that the entry has been operational.
                           awcTpFdbDdpNumAnnounceSent 1.3.6.1.4.1.522.3.12.4.1.9 unsigned32 read-only
The number of times the entry itself believes that it has issued some form of Aironet DDP Presense Announcement. If this field decreases, the entry has probably been reset.
                           awcTpFdbDdpNumAssociated 1.3.6.1.4.1.522.3.12.4.1.10 integer read-only
The number of Stations currently Associated with the entry.
                           awcTpFdbDdpLoad 1.3.6.1.4.1.522.3.12.4.1.11 integer read-only
An approximation of the percentage of offered vs. theoretically-available load on the host's radio interface.
                           awcTpFdbDdpDistFromDS 1.3.6.1.4.1.522.3.12.4.1.12 integer read-only
The Bridging Distance or Number of Hops between the entry and the backbone Distribution System (DS). If 0, the entry is directly connected to the DS.
                   awcDot11TpFdbTable 1.3.6.1.4.1.522.3.12.5 no-access
A table that contains information about entries for which the bridge has forwarding and/or filtering information. This table maintains only 802.11-specific information about each entry.
                       awcDot11TpFdbEntry 1.3.6.1.4.1.522.3.12.5.1 no-access
Information about a specific MAC address for which the bridge has some forwarding and/or filtering information.
                           awcDot11TpFdbAddress 1.3.6.1.4.1.522.3.12.5.1.1 macaddress read-only
A MAC address for which the bridge has forwarding and/or filtering information.
                           awcDot11TpFdbAID 1.3.6.1.4.1.522.3.12.5.1.2 unsigned32 read-only
AID with which the Station is associated with this system, or 2008 if the Station is not currently known to be associated. If the entry is multicast, awcDot11TpFdbAID is 0. Note that the uplink from a Client or Repeater AP to its parent is always AID 1.
                           awcDot11TpFdbClientState 1.3.6.1.4.1.522.3.12.5.1.3 awcdot11clientstate read-only
802.11 Service State of the Station.
                           awcDot11TpFdbTxShortRetries 1.3.6.1.4.1.522.3.12.5.1.4 counter32 read-only
The total number of 802.11 Short Retries incurred across all packet Transmission Attempts to this Station.
                           awcDot11TpFdbTxLongRetries 1.3.6.1.4.1.522.3.12.5.1.5 counter32 read-only
The total number of 802.11 Long Retries incurred across all packet Transmission Attempts to this Station.
                           awcDot11TpFdbLatestTxShortRetries 1.3.6.1.4.1.522.3.12.5.1.6 counter32 read-only
The number of 802.11 Short Retries incurred during the most recent packet Transmission Attempts to this Station.
                           awcDot11TpFdbLatestTxLongRetries 1.3.6.1.4.1.522.3.12.5.1.7 counter32 read-only
The number of 802.11 Long Retries incurred during the most recent packet Transmission Attempts to this Station.
                           awcDot11TpFdbRxWEPErrors 1.3.6.1.4.1.522.3.12.5.1.8 counter32 read-only
The total number of packets received from this Station which failed to be properly decrypted via the WEP security mechanism.
                           awcDot11TpFdbLatestRxSignalStrength 1.3.6.1.4.1.522.3.12.5.1.9 unsigned32 read-only
A device-dependent measure of the signal strength of the most recently received packet from this Station. Might be normalized or unnormalized.
                           awcDot11TpFdbLatestRxSignalQuality 1.3.6.1.4.1.522.3.12.5.1.10 unsigned32 read-only
A device-dependent measure of the signal quality of the most recently received packet from this Station.
                           awcDot11TpFdbCapabilities 1.3.6.1.4.1.522.3.12.5.1.11 unsigned32 read-only
The possible 802.11 capabilities of the Station's radio.
                           awcDot11TpFdbListenInterval 1.3.6.1.4.1.522.3.12.5.1.12 unsigned32 read-only
The number of beacon intervals across which a the Station will sleep in power-save mode, or 1 if the Station will never be in power-save mode.
                           awcDot11TpFdbSupportedDataRates 1.3.6.1.4.1.522.3.12.5.1.13 octet string read-only
This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representing a rate. Each rate shall be within the range from 2 to 255, the lower seven bits 0..6 of which corresponding to data rates in increments of 500 kb/s from 1 Mb/s to 63.5 Mb/s, and shall be supported (as indicated in the supported rates table) for receiving data. This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the station desires to synchronize is suitable. If set, Bit 7 of the rate specification indicates that rate is a member of the Basic Rate Set of the access point.
                           awcDot11TpFdbPreferredTxRate 1.3.6.1.4.1.522.3.12.5.1.14 unsigned32 read-only
The transmission rate at which a packet should currently be transmitted from an AP to this Station. This rate does not carry information about whether or not the rate is in the Basic Rate Set (i.e. bit 0x80 is never set).
                           awcDot11TpFdbCurrentBSS 1.3.6.1.4.1.522.3.12.5.1.15 macaddress read-only
BSS to which the station is currently Associated, or 00:00:00:00:00:00 if the station's current AP is unknown.
                           awcDot11TpFdbSSID 1.3.6.1.4.1.522.3.12.5.1.16 integer read-only
If the Station is Associated to this AP, the SSID via which the Station Associated. If 0, the Station Associated via dot11DesiredSSID. If greater than 0, the Station Associated through the auxiliary SSID with awcDot11AuxSSIDIndex equal to awcDot11TpFdbSSID. If -1, the Station is not currently Associated to this AP.
                           awcDot11TpFdbVlanId 1.3.6.1.4.1.522.3.12.5.1.17 awcvlanid read-only
Numeric ID of the VLAN over which the Station is communicating. If 0, the Station is not known to be communicating over any specific VLAN.
                   awcDot1dTpPortTable 1.3.6.1.4.1.522.3.12.6 no-access
A table that contains information about every port that is associated with this transparent bridge. This table contains information about host and protocol filtering for the port. Each entry represents a transparent bridge port on the device. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent.
                       awcDot1dTpPortEntry 1.3.6.1.4.1.522.3.12.6.1 no-access
A list of filtering information for each port of a transparent bridge. This information includes packet forwarding permission for unicast and non-unicast frames and filters ID used for the filtering.
                           awcDot1dTpPortDefaultUcastAllowedToGoTo 1.3.6.1.4.1.522.3.12.6.1.1 octet string read-write
The set of ports to which frames received from a specific port and destined for a unicast MAC address which is not already listed in dot1dStaticTable are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length.
                           awcDot1dTpPortDefaultNUcastAllowedToGoTo 1.3.6.1.4.1.522.3.12.6.1.2 octet string read-write
The set of ports to which frames received from a specific port and destined for a multicast MAC address which is not already listed in dot1dStaticTable are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length.
                           awcDot1dTpPortMaxNUcastPerSecond 1.3.6.1.4.1.522.3.12.6.1.3 unsigned32 read-write
The maximum number of multicast packets allowed to be forwarded over the port each second. If 0, the number of multicasts is unlimited.
                           awcDot1dTpPortDefaultInEthertypeFilterId 1.3.6.1.4.1.522.3.12.6.1.4 unsigned32 read-write
awcPfEtSetId of the Ethertype Filter Set to apply to packets received over this port. If 0, no filters are applied.
                           awcDot1dTpPortDefaultOutEthertypeFilterId 1.3.6.1.4.1.522.3.12.6.1.5 unsigned32 read-write
awcPfEtSetId of the Ethertype Filter Set to apply to packets transmitted over this port. If 0, no filters are applied.
                           awcDot1dTpPortDefaultInIpProtoFilterId 1.3.6.1.4.1.522.3.12.6.1.6 unsigned32 read-write
awcPfIppSetId of the IP Protocol Filter Set to apply to packets received over this port. If 0, no filters are applied.
                           awcDot1dTpPortDefaultOutIpProtoFilterId 1.3.6.1.4.1.522.3.12.6.1.7 unsigned32 read-write
awcPfIppSetId of the IP Protocol Filter Set to apply to packets transmitted over this port. If 0, no filters are applied.
                           awcDot1dTpPortDefaultInIpPortFilterId 1.3.6.1.4.1.522.3.12.6.1.8 unsigned32 read-write
awcPfIptSetId of the IP Port Filter Set to apply to packets received over this port. If 0, no filters are applied.
                           awcDot1dTpPortDefaultOutIpPortFilterId 1.3.6.1.4.1.522.3.12.6.1.9 unsigned32 read-write
awcPfIptSetId of the IP Port Filter Set to apply to packets transmitted over this port. If 0, no filters are applied.
                   awcTpFdbAlertTable 1.3.6.1.4.1.522.3.12.7 no-access
A table that contains information about entries for which the bridge has forwarding and/or filtering information. This table maintains only packet-trace alert statistics. Each entry is indexed by a MAC address in the packet forwarding. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent.
                       awcTpFdbAlertEntry 1.3.6.1.4.1.522.3.12.7.1 no-access
Information about a specific MAC address for which the bridge has some forwarding and/or filtering information.
                           awcTpFdbAlertAddress 1.3.6.1.4.1.522.3.12.7.1.1 macaddress read-only
A MAC address for which the bridge has forwarding and/or filtering information.
                           awcTpFdbFromAlertSrcPktsImmed 1.3.6.1.4.1.522.3.12.7.1.2 counter32 read-only
The total number of packets directed to this entry, over any interface, from a source host designated Alert From in the forwarding table.
                           awcTpFdbFromAlertSrcOctetsImmed 1.3.6.1.4.1.522.3.12.7.1.3 counter32 read-only
The total number of octets directed to this entry, over any interface, from a source host designated Alert From in the forwarding table.
                           awcTpFdbToAlertDestPktsImmed 1.3.6.1.4.1.522.3.12.7.1.4 counter32 read-only
The total number of packets sent by this entry, over any interface, to a destination MAC address designated Alert To in the forwarding table.
                           awcTpFdbToAlertDestOctetsImmed 1.3.6.1.4.1.522.3.12.7.1.5 counter32 read-only
The total number of packets sent by this entry, over any interface, to a destination MAC address designated Alert To in the forwarding table.
                           awcTpFdbAlertSentAlertTypePktsImmed 1.3.6.1.4.1.522.3.12.7.1.6 counter32 read-only
The total number of packets sent by this entry, over any interface, with a packet type designated Alert in an applicable protocol filter.
                           awcTpFdbAlertSentAlertTypeOctetsImmed 1.3.6.1.4.1.522.3.12.7.1.7 counter32 read-only
The total number of octets sent by this entry, over any interface, with a packet type designated Alert in an applicable protocol filter.
                           awcTpFdbAlertRcvdAlertTypePktsImmed 1.3.6.1.4.1.522.3.12.7.1.8 counter32 read-only
The total number of packets directed to this entry, over any interface, with a packet type designated Alert in an applicable protocol filter.
                           awcTpFdbAlertRcvdAlertTypeOctetsImmed 1.3.6.1.4.1.522.3.12.7.1.9 counter32 read-only
The total number of octets directed to this entry, over any interface, with a packet type designated Alert in an applicable protocol filter.
             awcRipConfig 1.3.6.1.4.1.522.3.13
             awcEventLog 1.3.6.1.4.1.522.3.14
                   awcEventOffsetGMT 1.3.6.1.4.1.522.3.14.1 integer32 read-write
The current offset from GMT in minutes.
                   awcEventUseDaylightSavingsTime 1.3.6.1.4.1.522.3.14.2 truthvalue read-write
If true, daylight savings time is used.
                   awcEventTimestampGMT 1.3.6.1.4.1.522.3.14.3 integer32 read-write
GMT Time, in seconds since January 1, 1970, when the system wall-clock time was last set.
                   awcEventUptimeModifiedGMT 1.3.6.1.4.1.522.3.14.4 integer32 read-only
System uptime, in seconds, when the system wall-clock time was last set.
                   awcEventDisplayWallClockTime 1.3.6.1.4.1.522.3.14.5 truthvalue read-write
If true, time display on the system's web pages and console is in wall-clock time. If false, time display is in system uptime.
                   awcEventDisplayUptimeAscending 1.3.6.1.4.1.522.3.14.6 truthvalue read-write
If true, time display in system uptime is measured from the time the system boots, forward. If false, time display in measured from the current time backwards.
                   awcEventDetailDefault 1.3.6.1.4.1.522.3.14.7 integer32 read-write
Detail level at which, by default, events are displayed. General detail level classifications are: 8 - no display at all 16 - sparse detail 24 - normal detail 32 - verbose detail 40 - exhaustive detail
                   awcEventSeverityDispConsole 1.3.6.1.4.1.522.3.14.8 awceventseverity read-write
If an event has a severity level greater than or equal to awcEventSeverityDispConsole, it is displayed on the console shortly after it occurs.
                   awcEventSeverityDispHtmlGUI 1.3.6.1.4.1.522.3.14.9 awceventseverity read-write
If an event has a severity level greater than or equal to awcEventSeverityDispHtmlGUI, it is displayed on the the Event Log GUI web pages.
                   awcEventSeverityDispHtmlConsole 1.3.6.1.4.1.522.3.14.10 awceventseverity read-write
If an event has a severity level greater than or equal to awcEventSeverityDispHtmlConsole, it is displayed on the the Event Log console browser pages.
                   awcEventAlertSNMP 1.3.6.1.4.1.522.3.14.11 truthvalue read-write
If true, events of a severity with Disposition set to notify will generate an SNMP trap.
                   awcEventAlertSyslog 1.3.6.1.4.1.522.3.14.12 truthvalue read-write
If true, events of a severity with Disposition set to notify will generate a sysLog message.
                   awcEventStatistics 1.3.6.1.4.1.522.3.14.14
                         awcEventCntSeverityNULL 1.3.6.1.4.1.522.3.14.14.1 counter32 read-only
NULL message counter.
                         awcEventCntSeveritySilent 1.3.6.1.4.1.522.3.14.14.2 counter32 read-only
Silent message counter.
                         awcEventCntSeveritySystemFatal 1.3.6.1.4.1.522.3.14.14.3 counter32 read-only
Fatal system message counter.
                         awcEventCntSeverityProtocolFatal 1.3.6.1.4.1.522.3.14.14.4 counter32 read-only
Fatal Protocol message counter.
                         awcEventCntSeverityPortFatal 1.3.6.1.4.1.522.3.14.14.5 counter32 read-only
Fatal Port message counter.
                         awcEventCntSeveritySystemAlert 1.3.6.1.4.1.522.3.14.14.6 counter32 read-only
System Alert message counter.
                         awcEventCntSeverityProtocolAlert 1.3.6.1.4.1.522.3.14.14.7 counter32 read-only
Protocol Alert message counter.
                         awcEventCntSeverityPortAlert 1.3.6.1.4.1.522.3.14.14.8 counter32 read-only
Port Alert message counter.
                         awcEventCntSeverityExternalAlert 1.3.6.1.4.1.522.3.14.14.9 counter32 read-only
External Alert message counter.
                         awcEventCntSeveritySystemWarning 1.3.6.1.4.1.522.3.14.14.10 counter32 read-only
System Warning message counter.
                         awcEventCntSeverityProtocolWarning 1.3.6.1.4.1.522.3.14.14.11 counter32 read-only
Protocol Warning message counter.
                         awcEventCntSeverityPortWarning 1.3.6.1.4.1.522.3.14.14.12 counter32 read-only
Port Warning message counter.
                         awcEventCntSeverityExternalWarning 1.3.6.1.4.1.522.3.14.14.13 counter32 read-only
External Warning message counter.
                         awcEventCntSeveritySystemInfo 1.3.6.1.4.1.522.3.14.14.14 counter32 read-only
System Info message counter.
                         awcEventCntSeverityProtocolInfo 1.3.6.1.4.1.522.3.14.14.15 counter32 read-only
Protocol Info message counter.
                         awcEventCntSeverityPortInfo 1.3.6.1.4.1.522.3.14.14.16 counter32 read-only
Port Info message counter.
                         awcEventCntSeverityExternalInfo 1.3.6.1.4.1.522.3.14.14.17 counter32 read-only
External Info message counter.
                   awcEventDisposition 1.3.6.1.4.1.522.3.14.15
                         awcEventDispSeverityNULL 1.3.6.1.4.1.522.3.14.15.1 awceventdisposition read-write
NULL message disposition.
                         awcEventDispSeveritySilent 1.3.6.1.4.1.522.3.14.15.2 awceventdisposition read-write
Silent message disposition.
                         awcEventDispSeveritySystemFatal 1.3.6.1.4.1.522.3.14.15.3 awceventdisposition read-write
Fatal system message disposition.
                         awcEventDispSeverityProtocolFatal 1.3.6.1.4.1.522.3.14.15.4 awceventdisposition read-write
Fatal Protocol message disposition.
                         awcEventDispSeverityPortFatal 1.3.6.1.4.1.522.3.14.15.5 awceventdisposition read-write
Fatal Port message disposition.
                         awcEventDispSeveritySystemAlert 1.3.6.1.4.1.522.3.14.15.6 awceventdisposition read-write
System Alert message disposition.
                         awcEventDispSeverityProtocolAlert 1.3.6.1.4.1.522.3.14.15.7 awceventdisposition read-write
Protocol Alert message disposition.
                         awcEventDispSeverityPortAlert 1.3.6.1.4.1.522.3.14.15.8 awceventdisposition read-write
Port Alert message disposition.
                         awcEventDispSeverityExternalAlert 1.3.6.1.4.1.522.3.14.15.9 awceventdisposition read-write
External Alert message disposition.
                         awcEventDispSeveritySystemWarning 1.3.6.1.4.1.522.3.14.15.10 awceventdisposition read-write
System Warning message disposition.
                         awcEventDispSeverityProtocolWarning 1.3.6.1.4.1.522.3.14.15.11 awceventdisposition read-write
Protocol Warning message disposition.
                         awcEventDispSeverityPortWarning 1.3.6.1.4.1.522.3.14.15.12 awceventdisposition read-write
Port Warning message disposition.
                         awcEventDispSeverityExternalWarning 1.3.6.1.4.1.522.3.14.15.13 awceventdisposition read-write
External Warning message disposition.
                         awcEventDispSeveritySystemInfo 1.3.6.1.4.1.522.3.14.15.14 awceventdisposition read-write
System Info message disposition.
                         awcEventDispSeverityProtocolInfo 1.3.6.1.4.1.522.3.14.15.15 awceventdisposition read-write
Protocol Info message disposition.
                         awcEventDispSeverityPortInfo 1.3.6.1.4.1.522.3.14.15.16 awceventdisposition read-write
Port Info message disposition.
                         awcEventDispSeverityExternalInfo 1.3.6.1.4.1.522.3.14.15.17 awceventdisposition read-write
External Info message disposition.
                   awcEventSyslogAddr 1.3.6.1.4.1.522.3.14.16 displaystring read-write
The destination of a sysLog message. This address must be numeric or DNS resolvable. Max. string length is 128 octets.
                   awcEventSyslogFacility 1.3.6.1.4.1.522.3.14.17 integer read-write
The facility number encoded within a sysLog message.
                   awcEventTraceStationSeverity 1.3.6.1.4.1.522.3.14.20 awceventseverity read-write
Severity at which all Detailed Packet Trace events shall be handled.
                   awcEventTraceLogSize 1.3.6.1.4.1.522.3.14.21 unsigned32 read-write
Size in octets of the system Detailed Event Trace Buffer. Note that this buffer is statically allocated at system initialization time. Changing the size of the buffer requires a system reboot.
                   awcEventTracePacketLen 1.3.6.1.4.1.522.3.14.22 unsigned32 read-write
Maximum size in octets of each Packet Trace Event recorded in the Detailed Event Trace Buffer.
                   awcEventTable 1.3.6.1.4.1.522.3.14.23 no-access
SNMP access to Event Log table.
                         awcEventEntry 1.3.6.1.4.1.522.3.14.23.1 no-access
An entry in awcEventTable.
                             awcEventID 1.3.6.1.4.1.522.3.14.23.1.1 unsigned32 read-only
System-unique identifier of the event.
                             awcEventTime 1.3.6.1.4.1.522.3.14.23.1.2 displaystring read-only
System time at which the event occurred.
                             awcEventSeverity 1.3.6.1.4.1.522.3.14.23.1.3 awceventseverity read-only
Severity of the event.
                             awcEventDescription 1.3.6.1.4.1.522.3.14.23.1.4 displaystring read-only
Detailed description of the event.
                             awcEventType 1.3.6.1.4.1.522.3.14.23.1.5 displaystring read-only
Specific type of the event. The type is unique for each test condition which can result in event generation.
                   awcEventUseCiscoFormat 1.3.6.1.4.1.522.3.14.25 truthvalue read-write
If true, the system will generate syslog messages using Cisco standard EMBLEM- compliant format. If false, syslog will use legacy Aironet format.
                   awcDot11AuthenticateFailDisposition 1.3.6.1.4.1.522.3.14.26 awcdot11eventdisposition read-write
Specifies how standard IEEE trap dot11AuthenticateFail is handled on the system.
                   awcDot11DeauthenticateDisposition 1.3.6.1.4.1.522.3.14.27 awcdot11eventdisposition read-write
Specifies how standard IEEE 802.11 trap dot11Deauthenticate is handled on the system.
                   awcDot11DisassociateDisposition 1.3.6.1.4.1.522.3.14.28 awcdot11eventdisposition read-write
Specifies how standard IEEE 802.11 trap dot11Disassociate is handled on the system.
             awcEtherMIB 1.3.6.1.4.1.522.3.15
                   awcEtherIfSpeedSelect 1.3.6.1.4.1.522.3.15.1 integer read-write
Requested Ethernet interface speed and duplex. Enumeration: 'oneHundredBaseTfull': 7, 'autoDetect': 8, 'oneHundredBaseT': 5, 'tenBaseT': 3, 'tenBaseTfull': 6.
                   awcEtherDuplex 1.3.6.1.4.1.522.3.15.5 integer read-only
Actual Ethernet interface duplex, after any line negotiation has taken place. Enumeration: 'full': 2, 'half': 1.
                   awcEtherCamSize 1.3.6.1.4.1.522.3.15.7 unsigned32 read-only
Number of entries in the hardware Content Addressible Memory MAC address filter available to the Ethernet controller.
                   awcEtherEnableSwCam 1.3.6.1.4.1.522.3.15.8 truthvalue read-write
If true, the Ethernet driver makes use of a Software Content Addressible Memory when making packet-forwarding decisions. When true, forwarding decisions are much faster, but network statistics collection is much coarser. If false, all packet-forwarding decisions are made by the higher-level packet-bridging logic.
                   awcEtherForcePortUnblock 1.3.6.1.4.1.522.3.15.9 truthvalue read-write
If true, the Ethernet port has dot1dStpPortState forced to forwarding even when the Spanning Tree Protocol is not enabled. This provides rapid port re-establishment at the potential cost of not detecting network topology loops involving the Ethernet and other network interfaces such as the radio. If false, the Ethernet port is blocked whenever there exists the potential for a network topology loop and the Spanning Tree Protocol is not enabled to guard against such loops.
                   awcEtherLostEthernetSeconds 1.3.6.1.4.1.522.3.15.10 integer read-write
Number of seconds the system must detect loss of backbone connectivity (i.e. loss of Ethernet link and no active trunks available on any of the radios) before taking the action specified by awcEtherLostEthernetAction.
                   awcEtherLostEthernetAction 1.3.6.1.4.1.522.3.15.11 integer read-write
Action taken by the system when a loss of backbone connectivity condition occurs for a period of time longer than awcEtherLostEthernetSeconds. Enumeration: 'radioOff': 3, 'restrictSSID': 4, 'switchRepeater': 2, 'noAction': 1.
                   awcEtherLostEthernetSSID 1.3.6.1.4.1.522.3.15.12 unsigned32 read-write
The single SSID index required by the system if awcEtherLostEthernetAction is restrictSSID and backbone connectivity is lost for a period of time longer than awcEtherLostEthernetSeconds. If 0, only Association to dot11DesiredSSID is allowed. If non-0, only Association to the auxiliary SSID with the corresponding awcDot11AuxSSIDIndex is allowed.
             awcPolicyGroups 1.3.6.1.4.1.522.3.16
                   awcPolGrpTable 1.3.6.1.4.1.522.3.16.1 no-access
Table of named groups of related protocol filters
                       awcPolGrpEntry 1.3.6.1.4.1.522.3.16.1.1 no-access
An entry in awcPolGrpTable.
                           awcPolGrpId 1.3.6.1.4.1.522.3.16.1.1.1 unsigned32 no-access
Numeric identifier of the Policy Group.
                           awcPolGrpName 1.3.6.1.4.1.522.3.16.1.1.2 displaystring read-only
Descriptive name of the Policy Group. Max. string length is 64 octets.
                           awcPolGrpStatus 1.3.6.1.4.1.522.3.16.1.1.3 rowstatus read-only
Row status of the entire Policy Group.
                           awcPolGrpInEthertypeFilterId 1.3.6.1.4.1.522.3.16.1.1.4 unsigned32 read-only
awcPfEtSetId of the Ethertype Filter Set to apply to packets received subject to this policy. If 0, no filters are applied.
                           awcPolGrpOutEthertypeFilterId 1.3.6.1.4.1.522.3.16.1.1.5 unsigned32 read-only
awcPfEtSetId of the Ethertype Filter Set to apply to packets transmitted subject to this policy. If 0, no filters are applied.
                           awcPolGrpInIpProtoFilterId 1.3.6.1.4.1.522.3.16.1.1.6 unsigned32 read-only
awcPfIppSetId of the IP Protocol Filter Set to apply to packets received subject to this policy. If 0, no filters are applied.
                           awcPolGrpOutIpProtoFilterId 1.3.6.1.4.1.522.3.16.1.1.7 unsigned32 read-only
awcPfIppSetId of the IP Protocol Filter Set to apply to packets transmitted subject to this policy. If 0, no filters are applied.
                           awcPolGrpInIpPortFilterId 1.3.6.1.4.1.522.3.16.1.1.8 unsigned32 read-only
awcPfIptSetId of the IP Port Filter Set to apply to packets received subject to this policy. If 0, no filters are applied.
                           awcPolGrpOutIpPortFilterId 1.3.6.1.4.1.522.3.16.1.1.9 unsigned32 read-only
awcPfIptSetId of the IP Port Filter Set to apply to packets transmitted subject to this policy. If 0, no filters are applied.
                   awcDscpToCosMapEnable 1.3.6.1.4.1.522.3.16.2 truthvalue read-write
If true, IP packets which are not already classified with a non-default Class of Service (CoS) can be classified by reference to their Differentiated Services Code-Point (DSCP) value. If false, unclassified IP packets are not subject to DSCP classification.
                   awcDscpToCosMapTable 1.3.6.1.4.1.522.3.16.3 no-access
This (conceptual) table to statically map Differentiated Services Code-Point (DSCP) values to corresponding Class of Service (CoS) values.
                       awcDscpToCosMapEntry 1.3.6.1.4.1.522.3.16.3.1 no-access
An Entry (conceptual row) in the Aironet DSCP To CoS mapping table to statically map a Differentiated Services Code-Point (DSCP) value to corresponding Class of Service (CoS) value.
                           awcDscpToCosMapDscp 1.3.6.1.4.1.522.3.16.3.1.1 integer no-access
The auxiliary variable used to identify instances of the columnar objects in the Aironet Differentiated Services Code-Point (DSCP) to Class of Service (CoS) Mapping Table. This variable directly corresponds to a Differentiated Services Code-Point, plus 1. The value may be used for marking a traffic stream.
                           awcDscpToCosMapCos 1.3.6.1.4.1.522.3.16.3.1.2 integer read-write
A value of Class of Service (CoS) mapped to the DSCP value awcDscpToCosMapDscp. This object corresponds directly to the 802.1D traffic category ID, plus 1. The matching values are therefore in the range 1 through 8. The value 0 indicates that no matching CoS is configured for the corresponding awcDscpToCosMapDscp.
             awcDdpIAPP 1.3.6.1.4.1.522.3.17
                   awcIappMcastIpAddr 1.3.6.1.4.1.522.3.17.1 ipaddress read-write
Multicast IP network address over which applicable packets of the DDP and IAPP protocols are exchanged between stations. Default 224.0.1.40.
                   awcIappPort 1.3.6.1.4.1.522.3.17.2 integer read-write
IP port identifier through which applicable packets of the DDP and IAPP protocols are exchanged between stations. Default 2887.
                   awcP802dot1XVersion 1.3.6.1.4.1.522.3.17.100 integer read-write
Version of the 802.1X Protocol specification which the AP will apply for incoming and outgoing EAPOL traffic. Versions with 'd' designators are draft specifications. The 802.1x-2001 standard is the same as draft 10. Enumeration: 'd7': 7, 'd10': 10, 'd8': 8.
             awcHotStandby 1.3.6.1.4.1.522.3.18
                   awcHotStandbyMACAddr 1.3.6.1.4.1.522.3.18.1 macaddress read-write
The MAC address of the target unit which is being monitored.
                   awcHotStandbyPollingFrequency 1.3.6.1.4.1.522.3.18.2 integer read-write
The frequency (in seconds) that the monitored target unit is being polled for testing its health.
                   awcHotStandbyPollingTimeOut 1.3.6.1.4.1.522.3.18.3 integer read-write
The total time (in seconds) that the monitoring unit can tolerate the failure at polling the monitored target unit. After this duration, one more failure of the polling will trigger the standby unit to take the role of monitored unit.
                   awcHotStandbyInHotStandby 1.3.6.1.4.1.522.3.18.4 truthvalue read-write
If true, the current unit is in its monitoring mode, i.e., if the unit is or will be a hot standby device.
                   awcHotStandbyState 1.3.6.1.4.1.522.3.18.5 awchotstandbystate read-only
The current state, e.g., running, stopped, ... of the hotstandby.
                   awcHotStandbyStatus 1.3.6.1.4.1.522.3.18.6 awchotstandbystatus read-only
The current stateus, e.g., error, OK, ... of the hotstandby.
             awcAaa 1.3.6.1.4.1.522.3.19
                   awcAaaServerTable 1.3.6.1.4.1.522.3.19.1 no-access
This table provides information of AAA servers currently available to this access point and the parameters used to connect to the servers. Each entry corresponds to an AAA server and is indexed by the priority in which the server should be used. AAA server of lowest priority value should be used first. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent.
                       awcAaaServerEntry 1.3.6.1.4.1.522.3.19.1.1 no-access
An entry provide the AAA server usage priority, protocol, name, IP port, request timeout, and authentication mechanisms supported.
                           awcAaaServerPriority 1.3.6.1.4.1.522.3.19.1.1.1 integer read-only
The priority of the server for when multiple servers are configured for the same service. Lower priority servers are used, in sequence, as backups.
                           awcAaaServerProtocol 1.3.6.1.4.1.522.3.19.1.1.2 integer read-write
The protocol used to communicate with the AAA server. Enumeration: 'radius': 1, 'tacacsPlus': 2.
                           awcAaaServerName 1.3.6.1.4.1.522.3.19.1.1.3 displaystring read-write
The DNS-resolvable name or numeric IP address of the AAA server.
                           awcAaaServerPort 1.3.6.1.4.1.522.3.19.1.1.4 unsigned32 read-write
The IP port number of the AAA server.
                           awcAaaServerTimeout 1.3.6.1.4.1.522.3.19.1.1.5 unsigned32 read-write
The amount of time (in seconds) that an Access Point should wait for a response from the AAA server before retransmitting the request. If the Access Point does not receive a response within the timeout period, it retransmits the request. If no response is received for a maximum of awcAaaServerMaxRetransmission retransmissions, the server is considered not reachable and a secondary server (if any) will be chosen. If the AP and the AAA server are connected through a low-speed network and the awcAaaServerTimeout value is set to too low, the network may become congested, as the AP retransmits unacknowledged requests that have not yet reached the server
                           awcAaaClientName 1.3.6.1.4.1.522.3.19.1.1.6 displaystring read-write
The name the Access Point uses to identify itself when acting as the supplicant.
                           awcAaaServerSharedSecret 1.3.6.1.4.1.522.3.19.1.1.7 displaystring read-write
The textual string shared between the AAA server and the access point, used to authenticate the messages delivered between them.
                           awcAaaServer8021xCapabilityEnabled 1.3.6.1.4.1.522.3.19.1.1.8 truthvalue read-write
Is this server to be used for 802.1X authentication?
                           awcAaaServerMacAddrAuthEnabled 1.3.6.1.4.1.522.3.19.1.1.9 truthvalue read-write
Is this server to be used for MAC-address authentication?
                           awcAaaServerAdminAuthEnabled 1.3.6.1.4.1.522.3.19.1.1.10 truthvalue read-write
Is this server to be used for AP Admin authentication?
                           awcAaaServerMipAuthEnabled 1.3.6.1.4.1.522.3.19.1.1.11 truthvalue read-write
Is this server to be used for Proxy Mobile IP authentication?
                           awcAaaServerMaxRetransmission 1.3.6.1.4.1.522.3.19.1.1.12 unsigned32 read-write
The maximum number of retransmission of a request. If an Access Point does not receive a response within awcAaaServerTimeout, it retransmits the request. If no response is received for a maximum number of retransmissions, the server is considered not reachable and a secondary server (if any) will be chosen temporarily.
                   awcAcctServerTable 1.3.6.1.4.1.522.3.19.2 no-access
This table provides information of AAA accounting servers currently available to this access point and the parameters used to connect to the servers. Each entry corresponds to an AAA server and is indexed by the priority in which the server should be used. AAA server of lowest priority value should be used first. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent.
                       awcAcctServerEntry 1.3.6.1.4.1.522.3.19.2.1 no-access
An entry provide the AAA server usage priority, protocol, name, IP port, request timeout, and security mechanisms supported.
                           awcAcctServerPriority 1.3.6.1.4.1.522.3.19.2.1.1 integer read-only
The priority of the server for when multiple servers are configured for the same service. Lower priority servers are used, in sequence, as backups.
                           awcAcctServerProtocol 1.3.6.1.4.1.522.3.19.2.1.2 integer read-write
The protocol used to communicate with the AAA server. Enumeration: 'radius': 1, 'tacacsPlus': 2.
                           awcAcctServerName 1.3.6.1.4.1.522.3.19.2.1.3 displaystring read-write
The DNS-resolvable name or numeric IP address of the AAA server.
                           awcAcctServerPort 1.3.6.1.4.1.522.3.19.2.1.4 unsigned32 read-write
The IP port number of the AAA server.
                           awcAcctServerTimeout 1.3.6.1.4.1.522.3.19.2.1.5 unsigned32 read-write
The amount of time (in seconds) that an Access Point should wait for a response from the Accounting server before retransmitting the request. If the Access Point does not receive a response within the timeout period, it retransmits the request. If no response is received for a maximum of awcAcctServerMaxRetransmission retransmissions, the server is considered not reachable and a secondary server (if any) will be chosen. If the AP and the Accounting server are connected through a low-speed network and the awcAcctServerTimeout value is set to too low, the network may become congested, as the AP retransmits unacknowledged accounting requests that have not yet reached the server
                           awcAcctServerUpdateEnable 1.3.6.1.4.1.522.3.19.2.1.6 truthvalue read-write
Is the Acct update to this server enabled?.
                           awcAcctServerUpdateDelay 1.3.6.1.4.1.522.3.19.2.1.7 unsigned32 read-write
The amount of time (in seconds) that the Access Point should send to the AAA server an update of accounting information.
                           awcAcctClientName 1.3.6.1.4.1.522.3.19.2.1.8 displaystring read-write
The name the Access Point uses to identify itself when acting as the supplicant.
                           awcAcctSecureEnabled 1.3.6.1.4.1.522.3.19.2.1.9 truthvalue read-write
Is this server to be used for accounting with security AUTH?
                           awcAcctGeneralEnabled 1.3.6.1.4.1.522.3.19.2.1.10 truthvalue read-write
Is this server to be used for accounting without security AUTH?
                           awcAcctServerSharedSecret 1.3.6.1.4.1.522.3.19.2.1.11 displaystring read-write
The textual string shared between the ACCT server and the access point, used to authenticate the messages delivered between them.
                           awcAcctServerMaxRetransmission 1.3.6.1.4.1.522.3.19.2.1.12 unsigned32 read-write
The maximum number of retransmissions of an accounting request. If an Access Point does not receive a response within awcAcctServerTimeout, it retransmits the request. If no response is received for a maximum number of retransmissions, the server is considered not reachable and a secondary server (if any) will be chosen.
                   awcAcctConfig 1.3.6.1.4.1.522.3.19.3
                       awcAcctEnable 1.3.6.1.4.1.522.3.19.3.1 truthvalue read-write
The boolean indicating if the accounting is enabled.
                       awcAcctStopDelayEnable 1.3.6.1.4.1.522.3.19.3.2 truthvalue read-write
The boolean indicating if the accounting stop request should be delayed before sent.
                       awcAcctStopDelayTime 1.3.6.1.4.1.522.3.19.3.3 unsigned32 read-write
The duration for the AP to delay sending the STOP message if any.
                   awcAaaAuthConfig 1.3.6.1.4.1.522.3.19.4
                       awcAaaServerPrimaryReattemptPeriod 1.3.6.1.4.1.522.3.19.4.1 unsigned32 read-write
While the primary authentication server serving a given authentication function is not reachable, the duration, in minutes, at which the AP should reattempt to return to its primary server serving that authentication function. A value of zero indicates that primary authentication server reattempt is disabled.
                       awcAaaServerDot1xAuthCurrent 1.3.6.1.4.1.522.3.19.4.2 integer read-only
The index of the currently selected AAA server for 802.1X user authentication. A value of zero indicates that no authentication server is available to service 802.1X authentication function to this AP. The value of 1 to 4 indicates the corresponding server for 802.1X authentication.
                       awcAaaServerMacAddrAuthCurrent 1.3.6.1.4.1.522.3.19.4.3 integer read-only
The index of the currently selected AAA server for MAC address authentication. A value of zero indicates that no authentication server is available to service MAC address authentication function to this AP. The value of 1 to 4 indicates the corresponding server in use for MAC address authentication function.
                       awcAaaServerAdminAuthCurrent 1.3.6.1.4.1.522.3.19.4.4 integer read-only
The index of the currently selected AAA server for the Access Point administrator authentication function. A value of zero indicates that no authentication server is available to service admin login authentication function to this AP. The value of 1 to 4 indicates the corresponding server in use for the AP admin authentication function.
                       awcAaaServerMipAuthCurrent 1.3.6.1.4.1.522.3.19.4.5 integer read-only
The index of the currently selected AAA server used to retrieve authentication data requied for Proxy Mobile registration and authentication function. A value of zero indicates that no authentication server is available for this function. The value of 1 to 4 indicates the corresponding server in use for proxy mobile IP related authentication function.
             awcProtocolFilters 1.3.6.1.4.1.522.3.20
                   awcPrFltEthertypeSetTable 1.3.6.1.4.1.522.3.20.1 no-access
Table of static Ethertype Filters
                       awcPrFltEthertypeSetEntry 1.3.6.1.4.1.522.3.20.1.1 no-access
An entry in awcPrFltEthertypeTable.
                           awcPfEtSetId 1.3.6.1.4.1.522.3.20.1.1.1 unsigned32 read-only
Numeric identifier of the static Ethertype filters set.
                           awcPfEtSetName 1.3.6.1.4.1.522.3.20.1.1.2 displaystring read-only
Descriptive name of the static Ethertype filters set. Max. string length is 64 octets.
                           awcPfEtDefaultDisposition 1.3.6.1.4.1.522.3.20.1.1.3 awcpfdisposition read-only
Default packet disposition of the static Ethertype filters set.
                           awcPfEtDefaultUcastTimeToLive 1.3.6.1.4.1.522.3.20.1.1.4 unsigned32 read-only
Default time-to-live for unicast (directed) packets. A value of 0 means to use the system defaults.
                           awcPfEtDefaultNUcastTimeToLive 1.3.6.1.4.1.522.3.20.1.1.5 unsigned32 read-only
Default time-to-live for non-unicast (multicast) packets. A value of 0 means to use the system defaults.
                           awcPfEtSetStatus 1.3.6.1.4.1.522.3.20.1.1.6 rowstatus read-only
Row status of the entire static Ethertype filters set.
                   awcPrFltEthertypeTable 1.3.6.1.4.1.522.3.20.2 no-access
Table of individual static Ethertype filters.
                       awcPrFltEthertypeEntry 1.3.6.1.4.1.522.3.20.2.1 no-access
An entry in the individual static Ethertype filter table.
                           awcPfEtEthertype 1.3.6.1.4.1.522.3.20.2.1.1 integer read-only
Ethertype (protocol) to which this individual static filter applies
                           awcPfEtDisposition 1.3.6.1.4.1.522.3.20.2.1.2 awcpfdisposition read-only
Designation of how the protocol should be handled.
                           awcPfEtUserPriority 1.3.6.1.4.1.522.3.20.2.1.3 awcpfpriority read-only
Designation of the priority assigned to packets of the Ethertype.
                           awcPfEtUcastTimeToLive 1.3.6.1.4.1.522.3.20.2.1.4 unsigned32 read-only
Time-to-live for unicast (directed) packets. A value of 0 means to use the Filter Set defaults.
                           awcPfEtNUcastTimeToLive 1.3.6.1.4.1.522.3.20.2.1.5 unsigned32 read-only
Time-to-live for non-unicast (multicast) packets. A value of 0 means to use the Filter Set defaults.
                           awcPfEtAlert 1.3.6.1.4.1.522.3.20.2.1.6 truthvalue read-only
Should an alert be registered when a packet of this Ethertype is observed?
                           awcPfEtStatus 1.3.6.1.4.1.522.3.20.2.1.7 rowstatus read-only
Row status of the individual static Ethertype filters.
                   awcPrFltIpProtocolSetTable 1.3.6.1.4.1.522.3.20.3 no-access
Table of static IP Protocol Filters
                       awcPrFltIpProtocolSetEntry 1.3.6.1.4.1.522.3.20.3.1 no-access
An entry in awcPrFltIpProtocolTable.
                           awcPfIppSetId 1.3.6.1.4.1.522.3.20.3.1.1 unsigned32 read-only
Numeric identifier of the static IP Protocol filters set.
                           awcPfIppSetName 1.3.6.1.4.1.522.3.20.3.1.2 displaystring read-only
Descriptive name of the static IP Protocol filters set. Max. string length is 64 octets.
                           awcPfIppDefaultDisposition 1.3.6.1.4.1.522.3.20.3.1.3 awcpfdisposition read-only
Default packet disposition of the static IP Protocol filters set.
                           awcPfIppDefaultUcastTimeToLive 1.3.6.1.4.1.522.3.20.3.1.4 unsigned32 read-only
Default time-to-live for unicast (directed) packets. A value of 0 means to use the system defaults.
                           awcPfIppDefaultNUcastTimeToLive 1.3.6.1.4.1.522.3.20.3.1.5 unsigned32 read-only
Default time-to-live for non-unicast (multicast) packets. A value of 0 means to use the system defaults.
                           awcPfIppSetStatus 1.3.6.1.4.1.522.3.20.3.1.6 rowstatus read-only
Row status of the entire static IP Protocol filters set.
                   awcPrFltIpProtocolTable 1.3.6.1.4.1.522.3.20.4 no-access
Table of individual static IP Protocol filters.
                       awcPrFltIpProtocolEntry 1.3.6.1.4.1.522.3.20.4.1 no-access
An entry in the individual static IP Protocol filter table.
                           awcPfIppIpProtocol 1.3.6.1.4.1.522.3.20.4.1.1 integer read-only
IP Protocol to which this individual static filter applies
                           awcPfIppDisposition 1.3.6.1.4.1.522.3.20.4.1.2 awcpfdisposition read-only
Designation of how the protocol should be handled.
                           awcPfIppUserPriority 1.3.6.1.4.1.522.3.20.4.1.3 awcpfpriority read-only
Designation of the priority assigned to packets of the IP Protocol.
                           awcPfIppUcastTimeToLive 1.3.6.1.4.1.522.3.20.4.1.4 unsigned32 read-only
Time-to-live for unicast (directed) packets. A value of 0 means to use the Filter Set defaults.
                           awcPfIppNUcastTimeToLive 1.3.6.1.4.1.522.3.20.4.1.5 unsigned32 read-only
Time-to-live for non-unicast (multicast) packets. A value of 0 means to use the Filter Set defaults.
                           awcPfIppAlert 1.3.6.1.4.1.522.3.20.4.1.6 truthvalue read-only
Should an alert be registered when a packet of this IP Protocol is observed?
                           awcPfIppStatus 1.3.6.1.4.1.522.3.20.4.1.7 rowstatus read-only
Row status of the individual static IP Protocol filters.
                   awcPrFltIpPortSetTable 1.3.6.1.4.1.522.3.20.5 no-access
Table of static IP Port Filters
                       awcPrFltIpPortSetEntry 1.3.6.1.4.1.522.3.20.5.1 no-access
An entry in awcPrFltIpPortTable.
                           awcPfIptSetId 1.3.6.1.4.1.522.3.20.5.1.1 unsigned32 read-only
Numeric identifier of the static IP Port filters set.
                           awcPfIptSetName 1.3.6.1.4.1.522.3.20.5.1.2 displaystring read-only
Descriptive name of the static IP Port filters set. Max. string length is 64 octets.
                           awcPfIptDefaultDisposition 1.3.6.1.4.1.522.3.20.5.1.3 awcpfdisposition read-only
Default packet disposition of the static IP Port filters set.
                           awcPfIptDefaultUcastTimeToLive 1.3.6.1.4.1.522.3.20.5.1.4 unsigned32 read-only
Default time-to-live for unicast (directed) packets. A value of 0 means to use the system defaults.
                           awcPfIptDefaultNUcastTimeToLive 1.3.6.1.4.1.522.3.20.5.1.5 unsigned32 read-only
Default time-to-live for non-unicast (multicast) packets. A value of 0 means to use the system defaults.
                           awcPfIptSetStatus 1.3.6.1.4.1.522.3.20.5.1.6 rowstatus read-only
Row status of the entire static IP Port filters set.
                   awcPrFltIpPortTable 1.3.6.1.4.1.522.3.20.6 no-access
Table of individual static IP Port filters.
                       awcPrFltIpPortEntry 1.3.6.1.4.1.522.3.20.6.1 no-access
An entry in the individual static IP Port filter table.
                           awcPfIptIpPort 1.3.6.1.4.1.522.3.20.6.1.1 integer read-only
IP Port to which this individual static filter applies
                           awcPfIptDisposition 1.3.6.1.4.1.522.3.20.6.1.2 awcpfdisposition read-only
Designation of how the Port should be handled.
                           awcPfIptUserPriority 1.3.6.1.4.1.522.3.20.6.1.3 awcpfpriority read-only
Designation of the priority assigned to packets of the IP Port.
                           awcPfIptUcastTimeToLive 1.3.6.1.4.1.522.3.20.6.1.4 unsigned32 read-only
Time-to-live for unicast (directed) packets. A value of 0 means to use the Filter Set defaults.
                           awcPfIptNUcastTimeToLive 1.3.6.1.4.1.522.3.20.6.1.5 unsigned32 read-only
Time-to-live for non-unicast (multicast) packets. A value of 0 means to use the Filter Set defaults.
                           awcPfIptAlert 1.3.6.1.4.1.522.3.20.6.1.6 truthvalue read-only
Should an alert be registered when a packet of this IP Port is observed?
                           awcPfIptStatus 1.3.6.1.4.1.522.3.20.6.1.7 rowstatus read-only
Row status of the individual static IP Port filters.
             awcMobileIP 1.3.6.1.4.1.522.3.22
                   enableMobileIP 1.3.6.1.4.1.522.3.22.1 truthvalue read-write
If true, the Access Point's proxy mobile IP service is enabled. If false, proxy mobile IP service is disabled.
                   awcprimAAP 1.3.6.1.4.1.522.3.22.2 displaystring read-write
The first AAP hostname or IP address from a list of 3 AAPs.
                   awcsec1AAP 1.3.6.1.4.1.522.3.22.3 displaystring read-write
The second AAP hostname or IP address from a list of 3 AAPs.
                   awcsec2AAP 1.3.6.1.4.1.522.3.22.4 displaystring read-write
The third AAP hostname or IP address from a list of 3 AAPs.
                   mipSATable 1.3.6.1.4.1.522.3.22.5 no-access
This entity's Mobile IP Local SA Bindings table.
                       mipSAEntry 1.3.6.1.4.1.522.3.22.5.1 no-access
An entry of SA bindings for a range of IP Addresses.
                           mipSAIpStart 1.3.6.1.4.1.522.3.22.5.1.1 ipaddress no-access
Starting IP Address of a range for the SA binding.
                           mipSAIpEnd 1.3.6.1.4.1.522.3.22.5.1.2 ipaddress read-only
Ending IP Address of the range for the SA binding.
                           mipSAGroupSPI 1.3.6.1.4.1.522.3.22.5.1.3 displaystring read-only
Group SPI for the range of IP Address in the Local SA binding
                           mipSAGroupKey 1.3.6.1.4.1.522.3.22.5.1.4 displaystring read-only
Group Key for the range of IP Address in the Local SA binding
                           mipSAStatus 1.3.6.1.4.1.522.3.22.5.1.5 rowstatus read-only
Row status of the pMIP SA. Allows deletion via SNMP.
                   awcmipDebug 1.3.6.1.4.1.522.3.22.6 truthvalue read-write
If true, the Access Point's proxy mobile IP debug information is printed on the console. If false, debug messages are not printed.
             awcVxConformance 1.3.6.1.4.1.522.3.100
                     awcVxCompliances 1.3.6.1.4.1.522.3.100.1
                         awcVxCompliance 1.3.6.1.4.1.522.3.100.1.1
The compliance statement for the awcVx group.
                     awcVxGroups 1.3.6.1.4.1.522.3.100.2
                         awcSystemGroup 1.3.6.1.4.1.522.3.100.2.1
Standard information to support operation of an Aironet Access Point such as versions, system flags, and what features are enabled.
                         bootconfigVxGroup 1.3.6.1.4.1.522.3.100.2.2
Standard information to support operation of the boot server.
                         awcSerialDevGroup 1.3.6.1.4.1.522.3.100.2.3
Standard information to support configuration of serial ports.
                         awcFtpGroup 1.3.6.1.4.1.522.3.100.2.4
Standard information to support configuration of the FTP protocol.
                         awcIfTableGroup 1.3.6.1.4.1.522.3.100.2.5
Standard information to support configuration of network interfaces.
                         awc802dot11Group 1.3.6.1.4.1.522.3.100.2.6
Standard information to support configuration of the 802.11 protocol.
                         awcUserMgrGroup 1.3.6.1.4.1.522.3.100.2.7
Standard information to support configuration of the User Manager.
                         awcHttpdGroup 1.3.6.1.4.1.522.3.100.2.8
Standard information to support configuration of the Web Server.
                         awcDnsResGroup 1.3.6.1.4.1.522.3.100.2.9
Standard information to support configuration of the DNS Resolver.
                         awcSnmpGroup 1.3.6.1.4.1.522.3.100.2.10
Standard information to support configuration of the SNMP protocol.
                         awcSntpGroup 1.3.6.1.4.1.522.3.100.2.11
Standard information to support configuration of the SNTP protocol.
                         awcForwardTblGroup 1.3.6.1.4.1.522.3.100.2.12
Standard information to support configuration of the Forwarding Table.
                         awcEventLogGroup 1.3.6.1.4.1.522.3.100.2.14
Standard information to support operation of the Event Log.
                         awcEtherMIBGroup 1.3.6.1.4.1.522.3.100.2.15
Standard information to support operation of the Ethernet Controller.
                         awcPolicyGroupsGroup 1.3.6.1.4.1.522.3.100.2.16
Standard information to support operation of Policy Groups.
                         awcDdpIAPPGroup 1.3.6.1.4.1.522.3.100.2.17
Standard information to support operation of the DDP and IAPP protocols.
                         awcHotStandbyGroup 1.3.6.1.4.1.522.3.100.2.18
Standard information to support operation of an AP in the Hot Standby mode.
                         awcAaaGroup 1.3.6.1.4.1.522.3.100.2.19
Standard information to support configuration of RADIUS and TACACS+ client operation.
                         awcProtocolFiltersGroup 1.3.6.1.4.1.522.3.100.2.20
Standard information to support configuration of static protocol filters on the AP.
                         awcMobileIpGroup 1.3.6.1.4.1.522.3.100.2.21
Information to support configuration of proxy mobile IP on the AP.
                         awcEthernetLostGroup 1.3.6.1.4.1.522.3.100.2.22
Information to support AP in case Ethernet connection is lost.
                         awc802dot11GroupExt1 1.3.6.1.4.1.522.3.100.2.23
Configuration information for IEEE 802.11 radio driver and firmware.
                         awcForwardTblGroupExt1 1.3.6.1.4.1.522.3.100.2.24
Information to support configuration of the Forwarding Table.
                         awcTrapLogGroup 1.3.6.1.4.1.522.3.100.2.100
SNMP trap corresponding to an event with a Severity Level requiring Notify Disposition while awcEventAlertSNMP is true.
         awcTrapLog 1.3.6.1.4.1.522.4
SNMP trap corresponding to an event with a Severity Level requiring Notify Disposition while awcEventAlertSNMP is true.