ASCEND-MIBATMP-MIB: View SNMP OID List / Download MIB

VENDOR: ASCEND COMMUNICATIONS INC.


 Home MIB: ASCEND-MIBATMP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, ASCEND-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mibatmpProfile 1.3.6.1.4.1.529.23.42
       mibatmpProfileTable 1.3.6.1.4.1.529.23.42.1 no-access
A list of mibatmpProfile profile entries.
           mibatmpProfileEntry 1.3.6.1.4.1.529.23.42.1.1 no-access
A mibatmpProfile entry containing objects that maps to the parameters of mibatmpProfile profile.
               atmpProfile_Index_o 1.3.6.1.4.1.529.23.42.1.1.1 integer read-only
               atmpProfile_AgentMode 1.3.6.1.4.1.529.23.42.1.1.2 integer read-write
The valid modes for this ATMP agent. Enumeration: 'tunnelDisabled': 1, 'homeAndForeignAgent': 4, 'homeAgent': 2, 'foreignAgent': 3.
               atmpProfile_AgentType 1.3.6.1.4.1.529.23.42.1.1.3 integer read-write
The type of Home Agent. Enumeration: 'gatewayHomeAgent': 2, 'routerHomeAgent': 1.
               atmpProfile_UdpPort 1.3.6.1.4.1.529.23.42.1.1.4 integer read-write
UDP port number to use locally.
               atmpProfile_HomeAgentPassword 1.3.6.1.4.1.529.23.42.1.1.5 displaystring read-write
The password required to access this home agent.
               atmpProfile_AtmpSapReply 1.3.6.1.4.1.529.23.42.1.1.6 integer read-write
Whether an ATMP Home Agent should reply to IPX SAP Nearest Server queries from the Mobile Client. Enumeration: 'yes': 2, 'no': 1.
               atmpProfile_RetryTimeout 1.3.6.1.4.1.529.23.42.1.1.7 integer read-write
The number of seconds between retries to establish a tunnel.
               atmpProfile_RetryLimit 1.3.6.1.4.1.529.23.42.1.1.8 integer read-write
The maximum number of failed attempts to establish a tunnel before switching to the alternate home agent.
               atmpProfile_IdleTimer 1.3.6.1.4.1.529.23.42.1.1.9 integer read-write
The number of minutes of no activity before an ATMP Home Agent will drop a tunnel. The value 0 disables the idle timer.
               atmpProfile_MtuLimit 1.3.6.1.4.1.529.23.42.1.1.10 integer read-write
The maximum IP packet size that can be transmitted to a remote agent without performing pre-fragmentation. The value 0 disables this feature. If enabled, the smallest size the system will use is 68, even if a smaller size is specified. This is to comply with the minimum IP packet size requirement per RFC 791.
               atmpProfile_ForceFragmentation 1.3.6.1.4.1.529.23.42.1.1.11 integer read-write
When set to NO, an ICMP message will be sent if a frame needs fragmentation and the DF bit is set. This is the standard behavior. When set to YES, it forces pre-fragmentation of large IP frames before they are sent to the remote agent, even if the frame has the DF bit set. This behavior is not standard and prevents MTU discovery mechanisms. Enumeration: 'yes': 2, 'no': 1.
               atmpProfile_AtmpSnmpTrap 1.3.6.1.4.1.529.23.42.1.1.12 integer read-write
When set to No, do not send ATMP SNMP traps. If Yes, send traps. The default is No. Enumeration: 'yes': 2, 'no': 1.
               atmpProfile_Action_o 1.3.6.1.4.1.529.23.42.1.1.13 integer read-write
Enumeration: 'deleteProfile': 3, 'createProfile': 2, 'noAction': 1.