ASCEND-ADVANCED-AGENT-MIB: View SNMP OID List / Download MIB

VENDOR: ASCEND COMMUNICATIONS INC.


 Home MIB: ASCEND-ADVANCED-AGENT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, ASCEND-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wanUseTrunkGroups 1.3.6.1.4.1.529.4.20 integer read-only
System wide parameter dictating the use of trunk groups. Enumeration: 'use': 2, 'do-not-use': 1.
 wanLineTable 1.3.6.1.4.1.529.4.21 no-access
The wan line table.
       wanLineEntry 1.3.6.1.4.1.529.4.21.1 no-access
An entry in the wan line table.
           wanLineIfIndex 1.3.6.1.4.1.529.4.21.1.1 integer read-only
This value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213).
           wanLineName 1.3.6.1.4.1.529.4.21.1.2 displaystring read-only
A textual name of the wanLine as assigned through the menu sytem.
           wanLineType 1.3.6.1.4.1.529.4.21.1.3 object identifier read-only
One of 'wanTypes'.
           wanLineChannels 1.3.6.1.4.1.529.4.21.1.4 integer read-only
The number of ds0 channels supported.
           wanLineState 1.3.6.1.4.1.529.4.21.1.5 integer read-only
The state of the line. Enumeration: 'ls-multipoint-2': 8, 'ls-multipoint-1': 7, 'ls-maintenance': 14, 'ls-does-not-exist': 2, 'ls-no-logical': 5, 'ls-loss-of-sync': 9, 'ls-active': 13, 'ls-disabled': 3, 'ls-point-to-point': 6, 'ls-ais-receive': 11, 'ls-no-d-channel': 12, 'ls-yellow-alarm': 10, 'ls-unknown': 1, 'ls-no-physical': 4.
           wanLineStateString 1.3.6.1.4.1.529.4.21.1.6 displaystring read-only
A textual representation of the wanLineState as displayed by the menu sytem.
           wanLineActiveChannels 1.3.6.1.4.1.529.4.21.1.7 integer read-only
The number of switched DS0 channels of the line. This variable counts the number of wanLineChannels on an enabled line with the wanLineChannelUsage of ds0-switched-channel(3) and with any following wanLineChannelState bs-clear-pending(8), bs-dialing(9), bs-ringing(10),and bs-connected(11) for all the entries in its wanLineChannelEntry table.
           wanLineUsage 1.3.6.1.4.1.529.4.21.1.8 integer read-write
The usage of the line. SETting values are supported only for T1/E1 links. Only lu-disabled(3), lu-trunk(5), and lu-quiesced(6) for T1/PRI are currently supported for SETs. Enumeration: 'lu-quiesced': 6, 'lu-t-online-user': 8, 'lu-trunk': 5, 'lu-unavailable': 2, 'lu-disabled': 3, 'lu-unknown': 1, 'lu-t-online-zgr': 9, 'lu-enabled': 4, 'lu-drop-and-insert': 7.
           wanLineHuntGrpPhoneNumber1 1.3.6.1.4.1.529.4.21.1.9 displaystring read-write
The hunt group phone number associated with the line. This entry is manually entered in the line configurations options.
           wanLineHuntGrpPhoneNumber2 1.3.6.1.4.1.529.4.21.1.10 displaystring read-write
The hunt group phone number associated with the line. This entry is manually entered in the line configurations options.
           wanLineHuntGrpPhoneNumber3 1.3.6.1.4.1.529.4.21.1.11 displaystring read-write
The hunt group phone number associated with the line. This entry is manually entered in the line configurations options.
           wanLineAvailableChannels 1.3.6.1.4.1.529.4.21.1.12 integer read-only
The number of DS0 channels of the line configured as Switched and available for making or accepting calls. This variable counts the number of wanLineChannels with the wanLineChannelState of bs-idle(7) for all the entries in its wanLineChannelEntry table.
           wanLineSwitchedChannels 1.3.6.1.4.1.529.4.21.1.13 integer read-only
The number of DS0 channels of the line configured as switched. This variable counts the number of wanLineChannels on an enabled line with the wanLineChannelUsage of ds0-switched-channel(3) and with wanLineChannelState not bs-disabled(18) for all the entries in its wanLineChannelEntry table.
           wanLineDisabledChannels 1.3.6.1.4.1.529.4.21.1.14 integer read-only
The number of disabled DS0 channels of the line. This variable counts the number of wanLineChannels with the wanLineChannelState of bs-disabled(18) and with any wanLineChannelUsage for all the entries in its wanLineChannelEntry table.
           wanLineNailedChannels 1.3.6.1.4.1.529.4.21.1.15 integer read-only
The number of DS0 channels of the line configured as nailed. This variable counts the number of wanLineChannels on an enabled line with the wanLineChannelUsage of ds0-clear-64(5) and with wanLineChannelState not bs-disabled(18) for all the entries in its wanLineChannelEntry table.
           wanLineOutOfServiceChannels 1.3.6.1.4.1.529.4.21.1.16 integer read-only
The number of out-of-service DS0 channels of the line. This variable counts the number of wanLineChannels on an enabled line with the wanLineChannelUsage of ds0-switched-channel and wanLineChannelState of bs-unavailable(2), bs-out-of-service(4), bs-maintenance(16) for all the entries in its wanLineChannelEntry table.
           wanLineNet2NetChannels 1.3.6.1.4.1.529.4.21.1.17 integer read-only
The number of NET2NET DS0 channels of the line. This variable counts the number of wanLineChannels on an enabled line with the wanLineChannelUsage of ds0-switched-channel and wanLineChannelState of bs-net2net-dialing, bs-net2net-ringing and bs-net2net-connected for all the entries in its wanLineChannelEntry table.
           wanLineDtptChannels 1.3.6.1.4.1.529.4.21.1.18 integer read-only
The number of DTPT DS0 channels of the line. This variable counts the number of wanLineChannels on an enabled line with the wanLineChannelUsage of ds0-switched-channel and wanLineChannelState of bs-dtpt-dialing, bs-dtpt-ringing and bs-dtpt-connected for all the entries in its wanLineChannelEntry table.
 wanLineChannelTable 1.3.6.1.4.1.529.4.22 no-access
The wan line table.
       wanLineChannelEntry 1.3.6.1.4.1.529.4.22.1 no-access
An entry in the wan line table.
           wanLineChannelIfIndex 1.3.6.1.4.1.529.4.22.1.1 integer read-only
This value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213).
           wanLineChannelIndex 1.3.6.1.4.1.529.4.22.1.2 integer read-only
The ds0 channel number with the line.
           wanLineChannelState 1.3.6.1.4.1.529.4.22.1.3 integer read-only
The state of the ds0 channel. Enumeration: 'bs-ringing-dtpt': 23, 'bs-dialing-net2net': 19, 'bs-connected-net2net': 21, 'bs-out-of-service': 4, 'bs-connected': 11, 'bs-maintenance': 16, 'bs-dialing-dtpt': 22, 'bs-ringing-net2net': 20, 'bs-unused': 3, 'bs-clear-pending': 8, 'bs-nailed-up': 5, 'bs-unknown': 1, 'bs-idle': 7, 'bs-signaling': 12, 'bs-spc-up': 17, 'bs-dialing': 9, 'bs-cut-through': 13, 'bs-current-d': 14, 'bs-held': 6, 'bs-disabled': 18, 'bs-ringing': 10, 'bs-connected-dtpt': 24, 'bs-backup-d': 15, 'bs-unavailable': 2.
           wanLineChannelStateString 1.3.6.1.4.1.529.4.22.1.4 displaystring read-only
A textual representation of the wanLineChannelState as displayed by the menu sytem.
           wanLineChannelErrorCount 1.3.6.1.4.1.529.4.22.1.5 integer read-only
The error count encountered on the channel.
           wanLineChannelUsage 1.3.6.1.4.1.529.4.22.1.6 integer read-only
The usage for this ds0 channel. Enumeration: 'ds0-cas-channel': 9, 'ds0-cut-through': 4, 'ds0-switched-channel': 3, 'ds0-clear-64': 5, 'ds0-nfas-sec-d': 8, 'ds0-unknown-channel': 1, 'ds0-nfas-prime-d': 7, 'ds0-unused-channel': 2, 'ds0-spc-channel': 10, 'ds0-pri-d-channel': 6.
           wanLineChannelTrunkGroup 1.3.6.1.4.1.529.4.22.1.7 integer read-only
The trunk group assigned to this channel. Note: This attribute returns 0 if wanUseTrunkGroup is set to do-not-use(1).
           wanLineChannelPhoneNumber 1.3.6.1.4.1.529.4.22.1.8 displaystring read-only
The phone number of this channel. This is the number sent to the far end in an inverse multiplexed call when instructing the far end to add more bandwidth. The number should contain the minimum number of digits to identify the channel. If the channel is part of a hunt group, the phone number should be blank.
           wanLineChannelSlot 1.3.6.1.4.1.529.4.22.1.9 integer read-only
A slot number for routing incoming calls associated with the channel. A slot-port number zero means calls arriving on this channel can be routed to any port.
           wanLineChannelPort 1.3.6.1.4.1.529.4.22.1.10 integer read-only
A port number for routing incoming calls associated with the channel. A slot-port number zero means calls arriving on this channel can be routed to any port.
           wanLineChannelNailedState 1.3.6.1.4.1.529.4.22.1.11 integer read-only
The nailed group associated with the channel. Enumeration: 'nailed-active': 3, 'not-applicable': 1, 'nailed-held': 2.
 wanAvailableChannels 1.3.6.1.4.1.529.4.23 integer read-only
The sum of wanLineAvailableChannels for all lines.
 wanSwitchedChannels 1.3.6.1.4.1.529.4.24 integer read-only
The sum of wanLineSwitchedChannels for all lines.
 wanDisabledChannels 1.3.6.1.4.1.529.4.25 integer read-only
The sum of wanLineDisabledChannels for all lines.
 wanActiveChannels 1.3.6.1.4.1.529.4.26 integer read-only
The sum of wanLineActiveChannels for all lines.
 wanNailedChannels 1.3.6.1.4.1.529.4.27 integer read-only
The sum of wanLineNailedChannels for all lines.
 wanOutOfServiceChannels 1.3.6.1.4.1.529.4.28 integer read-only
The sum of wanLineOutOfChannels for all lines.
 wanLineChannelUsageTable 1.3.6.1.4.1.529.4.29 no-access
Table of channel state summaries per line type.
       wanLineChannelUsageEntry 1.3.6.1.4.1.529.4.29.1 no-access
An entry in the channel state summary table for the given wanLineUsage and wanLineChannelState.
           wanLineChannelUsageCount 1.3.6.1.4.1.529.4.29.1.1 integer read-only
The count of channels in the selected wanLineChannelState for the selected wanLineUsage.