ARUBAWIRED-LOOPPROTECT-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT PACKARD


 Home MIB: ARUBAWIRED-LOOPPROTECT-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SMON-MIB, ARUBAWIRED-NETWORKING-OID, SNMPv2-SMI, Q-BRIDGE-MIB, BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 arubaWiredLoopProtectMIB 1.3.6.1.4.1.47196.4.1.1.3.1
This MIB module contains HP proprietary extensions to the standard Loop Protect MIBs.
     arubaWiredLoopProtectObjects 1.3.6.1.4.1.47196.4.1.1.3.1.1
         arubaWiredLoopProtect 1.3.6.1.4.1.47196.4.1.1.3.1.1.5
             arubaWiredLoopProtectNotifications 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.0
                 arubaWiredLoopProtectLoopDetectedNotification 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.0.1
A arubaWiredLoopProtectLoopDetectedNotification signifies that a loop is detected by the Loop Protection Protocol. Generation of this notification is controlled by arubaWiredLoopProtectTrapLoopDetectEnable. To prevent excessive notifications, this trap allows only one notifications every 30 seconds. Notifications that are missed due to this limitation are dropped and are not sent later.
                 arubaWiredLoopProtectVlanLoopDetectedNotification 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.0.2
A arubaWiredLoopProtectVlanLoopDetectedNotification signifies that a loop is detected by the Loop Protection feature while operating in VLAN mode. Generation of this notification is controlled by arubaWiredLoopProtectTrapLoopDetectEnable. To prevent excessive notifications, this trap allows only one notifications every 30 seconds. Notifications that are missed due to this limitation are dropped and are not sent later.
             arubaWiredLoopProtectBase 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1
                 arubaWiredLoopProtectInterval 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1.1 integer32 read-write
The interval in seconds at which Loop Protection packets are transmitted. The default value is 5 seconds.
                 arubaWiredLoopProtectTrapLoopDetectEnable 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1.2 truthvalue read-write
Indicates whether notifications should be sent when a loop is detected on a port. By default this object will have a value of false(2).
                 arubaWiredLoopProtectEnableTimer 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1.3 integer32 read-write
The time in seconds to wait before re-enabling a port disabled by Loop Protection. When a port is disabled by Loop Protection, a re-enable timer for the port is initialized. If the re-enable timer value is specified as zero seconds the port remains disabled, else the port is re-enabled after the specified time.
                 arubaWiredLoopProtectMode 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1.4 integer read-write
This object is used to configure the operational mode of Loop Protection feature. The Loop Protection feature can be configured to operate in port mode or VLAN mode. Enumeration: 'vlan': 2, 'port': 1.
                 arubaWiredLoopProtectVIDList 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1.5 vidlist read-write
A list of VLANs on which Loop Protection is enabled.
             arubaWiredLoopProtectPort 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2
                 arubaWiredLoopProtectPortTable 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1 no-access
Per-interface configuration for Loop Protection.
                     arubaWiredLoopProtectPortEntry 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1 no-access
Loop Protection configuration information for a single port.
                         arubaWiredLoopProtectPortInterfaceIndex 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.1 interfaceindex no-access
The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
                         arubaWiredLoopProtectPortEnable 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.2 truthvalue read-write
This object indicates whether the Loop Protection is enabled on a port. The default value is FALSE
                         arubaWiredLoopProtectPortLoopDetected 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.3 truthvalue read-only
This object will be set to TRUE when a loop is detected on the port. The value of this object will be reset to FALSE when the port's arubaWiredLoopProtectPortEnable is set to FALSE.
                         arubaWiredLoopProtectPortLastLoopTime 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.4 timestamp read-only
The value of sysUpTime when a loop was last detected on this port. A value of 0 means that the timestamp has not been set.
                         arubaWiredLoopProtectPortLoopCount 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.5 counter32 read-only
This object provides the number of loops detected on a Loop Protection enabled port. The value of this object is set to zero when Loop Protection is disabled on a port.
                         arubaWiredLoopProtectPortReceiverAction 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.6 loopprotectreceiveraction read-write
Controls the action taken when a Loop Protection packet is received on this port. When set to 'disableTx' the port that transmitted the packet is disabled. When set to 'noDisable' the transmitting port is not disabled. When set to 'disableTxRx' the ports transmitting and receiving the packets are disabled.
                         arubaWiredLoopProtectLoopDetectedVlan 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.7 integer32 read-only
Refers to this object for the port on which loop is detected.
                         arubaWiredLoopProtectPortVlanList 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.8 vidlist read-write
A list of VLANs for this interface in which Loop Protection is enabled.
             arubaWiredLoopProtectConformance 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.3
                 arubaWiredLoopProtectGroups 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.3.1
                     arubaWiredLoopProtectBaseGroup 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.3.1.4
A collection of objects providing basic instrumentation and control of the HP Loop protection entity.
                     arubaWiredLoopProtectVLANGroup 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.3.1.10
A collection of objects providing support for Loop Protect per VLAN feature.
                 arubaWiredLoopProtectCompliances 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.3.2
                     arubaWiredLoopProtectCompliance 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.3.2.5
The compliance statement for HP Switches with support for arubaWired loop protection objects.