ALU-MICROWAVE-MIB: View SNMP OID List / Download MIB

This document is the SNMP MIB module to manage and provision the microwave components on the Nokia 7xxx device. Copyright 2012-2014 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.

The compliance statement for revision 1.0 of ALU-MICROWAVE-MIB.

The group of objects supporting management of the microwave aware ports for the remote management of Microwave Awareness on Nokia SAR series systems.

The group of notifications supporting the management of microwave awareness on Nokia SAR series systems.

The group of notifications objs supporting the management of microwave awareness on Nokia SAR series systems.

The group of objects supporting management of the peer discovery management of Microwave Awareness on Nokia SAR series systems.

The group of objects supporting management of the alarm management of Microwave Awareness on Nokia SAR series systems.

The aluMwLinkTable has an entry for each Packet Microwave Link in the system.

Each row entry represents a Packet Microwave Link that is provisioned on the system. Entries can be created and deleted on the system via SNMP SET operations operations using the aluMwLinkRowStatus object. Creation of this entry enables management of Packet Microwave (MW) Links that contain Microwave Radios. The operational state of the link is based on the state of the contained radios and protection scheme provisioned.

aluMwLinkID identifies this Packet Microwave Link. The value of this object is calculated using the TiMOS encoding scheme described in AluMwLinkID.

aluMwLinkRowStatus controls the creation and deletion of row entries in the aluMwLinkTable. The manager has to first calculate the aluMwLinkID based on the TiMOS encoding.

This object specifies all the conditions that affect the operating status of this Packet Microwave Link. Bits: 'noRadiosPresent': 2, 'receptionFailure': 6, 'di': 7, 'noRadioCfg': 0, 'noRadiosReady': 3, 'radioFailure': 5, 'incompatibleConfig': 4, 'txMuted': 8, 'linkAdminDown': 1.

aluMwLinkRadioScheme specifies the scheme all the radios contained in this link are operating in. Enumeration: 'unknown': 0, 'onePlusOneHSB': 2, 'onePlusZero': 1.

aluMwLinkAlarmState summarizes the alarm state of the link. A value of 'notSupported' indicates the link does not support alarm management. Enumeration: 'major': 2, 'ok': 0, 'inderminate': 5, 'unknown': 7, 'warning': 4, 'critical': 1, 'notSupported': 6, 'minor': 3.

aluMwLinkAlarmsCritical indicates the number of critical alarms that are raised on this microwave link.

aluMwLinkAlarmsMajor indicates the number of major alarms that are raised on this microwave link.

aluMwLinkAlarmsMinor indicates the number of minor alarms that are raised on this microwave link.

aluMwLinkAlarmsWarning indicates the number of warning alarms that are raised on this microwave link.

aluMwLinkAlarmsInd indicates the number of indeterminate alarms that are raised on this microwave link.

aluMwLinkAlarmsCommunication indicates the number of alarms related to radio communications that are raised on this microwave link.

aluMwLinkAlarmsEquipment indicates the number of alarms related to equipment that are raised on this microwave link.

aluMwLinkEPSActivity indicates the current activity of the equipment protection scheme

aluMwLinkTPSActivity indicates the current activity of the transport protection scheme

aluMwLinkRPSActivity indicates the current activity of the radio protection scheme

aluMwLinkEPSRevertiveness configures the revertiveness of the equipment protection scheme

aluMwLinkTPSRevertiveness indicates the revertiveness of the transport protection scheme. This is inherited from the aluMwLinkEPSRevertiveness

aluMwLinkRPSRevertiveness configures the revertiveness of the radio protection scheme

aluMwLinkEPSMainMaintOp applies maintenance operations to the main radio in the equipment protection scheme

aluMwLinkEPSSpareMaintOp applies maintenance operations to the spare radio in the equipment protection scheme

aluMwLinkTPSMainMaintOp applies maintenance operations to the main radio in the transport protection scheme

aluMwLinkTPSSpareMaintOp applies maintenance operations to the spare radio in the transport protection scheme

aluMwLinkRPSMainMaintOp applies maintenance operations to the main radio in the radio protection scheme

aluMwLinkRPSSpareMaintOp applies maintenance operations to the spare radio in the radio protection scheme

aluMwLinkPeerID identifies the peer Microwave Link. The value of this object is calculated using the TiMOS encoding scheme described in AluMwLinkID when connected to 7705 SAR systems and based on peer encoding scheme for other peer types.

aluMwLinkPeerNEIpAddress identifies the peer NE IPv4 address.

aluMwLinkClearStatistics clears all link level statistics.

aluMwLinkPeerDiscovery enables and disables discovery of peer information on managed microwave links. The value of aluMwLinkPeerDiscovery is not used for standalone microwave links.

The aluMwRadioTable has an entry for each Microwave Radio in the system.

Each row entry represents a Microwave Radio that is connected off a physical port on the system. The aluMwRadioPortID contains this port encoded in it. Entries can be created and deleted on microwave-aware ports via SNMP SET operations using the aluMwRadioRowStatus object. Creation of this entry enables management of connected Microwave (MW) Packet Transport Radios. The operational state of the connected radio and it's Microwave Link is represented in the operational state of this entry. Microwave Radios may only be created on ports that support microwave-awareness. There can be only one Microwave Radio on each port.

aluMwRadioPortID identifies the port of this microwave radio. The value of this object is calculated using the TiMOS encoding scheme described in TmnxPortID.

aluMwRadioRowStatus controls the creation and deletion of row entries in the aluMwRadioTable. The manager has to first calculate the aluMwRadioPortID based on the TiMOS encoding. Setting aluMwRadioRowStatus to 'createAndGo(4)', 'createAndWait(5)' or 'destroy(6)' will be rejected if aluMwRadioPortID is set to a TmnxPortID that is the same as either TIMETRA-CHASSIS-MIB::tmnxSyncIfTimingRef1SrcPort or TIMETRA-CHASSIS-MIB::tmnxSyncIfTimingRef2SrcPort.

aluMwRadioMode specifies the role this microwave radio is operating with respect to the 'mw-link' that it is part of. This radio will be a 'main (1)' or 'spare (2)' radio in an mw-link. This object can only be set with aluMwRadioRowStatus during the creation of the mw-link. Enumeration: 'unknown': 0, 'main': 2, 'spare': 3, 'onePlusZero': 1.

aluMwRadioMwLinkID indicates the AluMwLinkID of the mw-link that this radio is part of. This object must be set during conjunction with aluMwRadioRowStatus during mw-link creation.

The current operational status of this microwave radio.

This object specifies all the conditions that affect the operating status of this radio. Only 'portOperDown' is applicable to radios operating as standalone devices as indicated by aluMwRadioStandalone. Bits: 'radioCommError': 3, 'incompatiblePower': 11, 'incompatibleFreq': 10, 'noDbConfig': 21, 'incompatibleModParms': 12, 'incompatibleShifter': 9, 'iss': 25, 'lof': 16, 'noSoftware': 23, 'radioEqFailure': 8, 'radioNotPresent': 2, 'txMuted': 6, 'proxyActive': 18, 'radioInit': 4, 'di': 13, 'protectionFail': 17, 'dbSyncInProgress': 20, 'softwareDownload': 5, 'highBer': 26, 'portOperDown': 1, 'softwareMismatch': 24, 'radioNotReady': 7, 'noDbFile': 19, 'rslThresholdFail': 15, 'portNotPresent': 0, 'radioLinkDown': 14, 'tpsTxMuted': 22.

This object specifies whether the radio is operating as a standalone network element or if it is managed by this router. A value of 'true' indicates it is operating as a standalone device.

The textual name of the radio.

aluMwRadioDatabaseFilename specifies the filename of the radio's database. This file must be located at the same path as the system configuration file.

aluMwRadioType specifies the device type of microwave radio. The type of radio is only available when the microwave radio is managed and is present. aluMwRadioType returns a value of '0' when the radio type is unknown.

aluMwRadioType specifies the frequency of the microwave radio. The frequency of the radio is only available when the microwave radio is managed and is present.

aluMwRadioAlarmState summarizes the alarm state of the radio. Enumeration: 'major': 2, 'ok': 0, 'inderminate': 5, 'unknown': 7, 'warning': 4, 'critical': 1, 'notSupported': 6, 'minor': 3.

aluMwRadioAlarmsCritical indicates the number of critical alarms that are raised on this microwave radio.

aluMwRadioAlarmsMajor indicates the number of major alarms that are raised on this microwave radio.

aluMwRadioAlarmsMinor indicates the number of minor alarms that are raised on this microwave radio.

aluMwRadioAlarmsWarning indicates the number of warning alarms that are raised on this microwave radio.

aluMwRadioAlarmsInd indicates the number of indeterminate alarms that are raised on this microwave radio.

aluMwRadioAlarmsCommunication indicates the number of alarms related to radio communications that are raised on this microwave radio.

aluMwRadioAlarmsEquipment indicates the number of alarms related to equipment that are raised on this microwave radio.

aluMwRadioTxMuted indicates the current state of the transmitter. Enumeration: 'unknown': 0, 'none': 1, 'manual': 2, 'auto': 3.

aluMwRadioReboot performs a reset of the radio device.

The aluMwRadioLastStateChange variable contains the value of the sysUpTime the last time the operational status of the radio link changed state.

The aluMwRadioCommEstablished variable contains the value of the sysUpTime the last time the radio managment communications was established.

The aluMwRadioCommLost variable contains the value of the sysUpTime the last time the radio managment communications was lost.

aluMwRadioSwState indicates the state of software on the MPT.

aluMwRadioSwDnldProgress indicates the progress percentage of an in-progress software download to the MPT.

aluMwRadioRslHistoryUrl specifies the URL of the radio's RSL history. This file must be located on the local compact flash.

aluMwRadioRslHistoryClear performs a clear of the MPT RSL history.

This object specifies the MPT radio fault conditions which can be suppressed. Bits: 'highBer': 1, 'rslThreshold': 3, 'di': 2, 'allfaults': 0.

This object enables normalized G.826 performance monitoring statistics to be collected.

The current operational status of normalized G.826 performance monitoring statistics.

Clears the recorded current and historical normalized G.826 statistics.

This object enables Adaptive Coding and Modulation performance monitoring statistics to be collected.

The current operational status of Adaptive Coding and Modulation performance monitoring statistics.

Clears the recorded current and historical Adaptive Coding and Modulation statistics.

This object enables RX and TX power performance monitoring statistics to be collected.

The current operational status of RX and TX power performance monitoring statistics.

Clears the recorded current and historical RX and TX power statistics.

This table contains the radio analogue measurements.

An entry of the analogue measurements table. Each entry corresponds to a Radio Synchronous or Plesiochronous Physical Interface (RSPI or RPPI).

This object represents the local transmitted power level. It is an integer with associated measure unit expressed in decade of dBm.

This object represents the local received power level. In case of space diversity configuration with combiner function in base band it is used to represent the power at the input of the local main receiver. It is a negative integer with associated measure unit expressed in decade of dBm.

This object represents the remote transmitted power level. It is an integer with associated measure unit expressed in decade of dBm.

This object represents the remote received power level. In case of space diversity configuration with combiner function in base band it is used to represent the power at the input of the remote main receiver. It is a negative integer with associated measure unit expressed in decade of dBm.

This object represents the local RSL power for SD (combiner) module input. It is an integer with associated measure unit expressed in decade of dBm.

This object represents the remote RSL power for SD (combiner) module input. It is a negative integer with associated measure unit expressed in decade of dBm.

This table contains the radio alarm conditions.

An entry of the alarms table. Each entry corresponds to a Radio alarm conditions that is currently raised or cleared.

Used by Microwave notifications, the OID indicates the identifier of an alarm condition on the radio device.

Used by Microwave notifications, the OID indicates the time at which the event occured on the radio device.

This object contains the alarm name of the condition.

Used by Microwave notifications, the OID indicates the severity of an alarm condition on the radio device. Enumeration: 'major': 2, 'indeterminate': 5, 'critical': 1, 'cleared': 6, 'warning': 4, 'minor': 3.

This object contains the alarm specific problem description. Indicates further refinements to the problem identified by the alarm type. If more than one specific problem is described in this object, the problem descriptions are separated by <;> characters. The format of the DisplayString is defined as follow: String | OID | ({String;}((OID | Integer);)*)

Used by Microwave notifications, the OID indicates the type of alarm condition on the radio device. Enumeration: 'environment': 5, 'communication': 1, 'processing': 3, 'qos': 2, 'equipment': 4.

Used by Microwave notifications, the OID indicates the object on the radio device that has the alarm condition.

Used by Microwave notifications, the OID indicates the sub-object on the radio device that has the alarm condition.

The aluMwLinkStatisticsTable has an entry for each Packet Microwave Link in the system.

Each row entry represents a Packet Microwave Link that is provisioned on the system.

aluMwLinkAggrFramesTx specifies the number of ethernet frames to be transmitted over radio link.

aluMwLinkAggrOctetsTx specifies the number of octets to be transmitted over radio link.

aluMwLinkAggrDiscardedTx specifies the number of frames discarded on the radio before transmission.

aluMwLinkQueue1FramesTx specifies the number of ethernet frames to be transmitted from queue 1 over radio link.

aluMwLinkQueue1OctetsTx specifies the number of octets to be transmitted from queue 1 over radio link.

aluMwLinkQueue1DiscardedTx specifies the number of frames discarded on the radio from queue 1 before transmission.

aluMwLinkQueue2FramesTx specifies the number of ethernet frames to be transmitted from queue 2 over radio link.

aluMwLinkQueue2OctetsTx specifies the number of octets transmitted to be from queue 2 over radio link.

aluMwLinkQueue2DiscardedTx specifies the number of frames discarded on the radio from queue 2 before transmission.

aluMwLinkQueue3FramesTx specifies the number of ethernet frames to be transmitted from queue 3 over radio link.

aluMwLinkQueue3OctetsTx specifies the number of octets to be transmitted from queue 3 over radio link.

aluMwLinkQueue3DiscardedTx specifies the number of frames discarded on the radio from queue 3 before transmission.

aluMwLinkQueue4FramesTx specifies the number of ethernet frames to be transmitted from queue 4 over radio link.

aluMwLinkQueue4OctetsTx specifies the number of octets to be transmitted from queue 4 over radio link.

aluMwLinkQueue4DiscardedTx specifies the number of frames discarded on the radio from queue 4 before transmission.

aluMwLinkQueue5FramesTx specifies the number of ethernet frames to be transmitted from queue 5 over radio link.

aluMwLinkQueue5OctetsTx specifies the number of octets to be transmitted from queue 5 over radio link.

aluMwLinkQueue5DiscardedTx specifies the number of frames discarded on the radio from queue 5 before transmission.

The aluMwRadioInfoTable has an entry for each Microwave Radio in the system.

Each row entry represents a Microwave Radio that is connected off a physical port on the system. The aluMwRadioPortID contains this port encoded in it.

aluMwRadioInfoValid indicates whether the info of the MPT is valid.

The inventory company identifier for the microwave radio.

The mnemonic inventory value for the microwave radio.

The inventory CLEI value for the microwave radio.

The inventory Hardware Part + ICS value for the microwave radio.

The inventory Software Part number for the microwave radio.

The inventory factory identifier for the microwave radio.

The unique inventory serial number for the microwave radio.

The inventory manufacturing date identifier for the microwave radio.

The inventory manufacturing date for the microwave radio.

The inventory customer field for the microwave radio.

aluMwRadioTemperature indicates the temperature of the MPT.

The aluMwTable has system information for microwave.

Each row entry represents a Microwave System.

aluMwSwPackageValid indicates whether SAR has detected a valid Software package for managed radios.

aluMwSwDownloadTool is used to initiate a software download of radio software to all managed radios. Enumeration: 'notApplicable': 0, 'startForcedDownload': 2, 'startDownload': 1.

aluMwSwDownloadState is used to indicate the state of the of radio software to all managed radios. noSoftwarePackage - No Valid Software Package Found ready - Software is Ready downloadInProgress - Software Tool Download downloadFailed - Software Tool Failed Enumeration: 'ready': 2, 'notApplicable': 0, 'downloadInProgress': 3, 'noSoftwarePackage': 1, 'downloadFailed': 5.

This table contains the MW link Transmit Diversity Antenna status.

An entry of the Transmit Diversity Antenna status table.

aluMwLinkTdaCmdState is used to get the TDA command state. Enumeration: 'disabled': 0, 'enabled': 1, 'error': 2.

aluMwLinkTdaManualCmdStatus is used to get the TDA manual command status. Enumeration: 'main': 1, 'diversity': 2, 'notForced': 0, 'error': 3.

aluMwLinkTdaSwitchPosition is used to get the TDA switch position. Enumeration: 'main': 0, 'diversity': 1, 'error': 2.

This table contains the current and historic normalized G.826 performance monitoring statistics for the given radio.

An entry of the microwave radio G.826 performance monitoring table.

Index to select the radio link or radio hop.

Index to select the 15 minute or 24 hour counters.

Index to select the current (0) or historic counters.

The number of seconds since midnight, January 1st 1970 to the start of this counting period (even 15 minutes or beginning of day, depending on selected period).

The number of seconds recorded in this period.

The EPS state at the time of recording this period.

If the stats are incomplete for this period, they will be considered suspect.

The number of errored seconds.

The number severely errored seconds.

The number of background block errors.

The number of unavailable seconds.

This table contains the current and historic adaptive coding and modulation performance monitoring statistics for the given radio.

An entry of the microwave ACM performance monitoring table.

Index to select the 15 minute or 24 hour counters.

Index to select the current (0) or historic counters.

Index to select the modulation ID.

The number of seconds since midnight, January 1st 1970 to the start of this counting period (even 15 minutes or beginning of day, depending on selected period).

The number of seconds recorded in this period.

If the stats are incomplete for this period, they will be considered suspect.

The number of milliseconds spent at this modulation.

This table contains the current and historic RX and TX power performance monitoring statistics for the given radio.

An entry of the microwave Power performance monitoring table.

Index to select the received or transmitted power levels. Enumeration: 'rx': 0, 'tx': 1.

Index to select the radio link or radio hop. Radio link is not applicable when the direction is tx.

Index to select the 15 minute or 24 hour counters.

Index to select the current (0) or historic counters.

The number of seconds since midnight, January 1st 1970 to the start of this counting period (even 15 minutes or beginning of day, depending on selected period).

The number of seconds recorded in this period.

The EPS state at the time of recording this period. If the direction is tx, EPS state is always notRelevant.

If the stats are incomplete for this period, they will be considered suspect.

The minimum power level.

The maximum power level.

The average power level.

Used by Microwave notifications, the OID indicates the port id where a radio is connected.

Used by Microwave notifications, the OID indicates the time at which the event occured on the radio device.

Used by Microwave notifications, the OID indicates the identifier of an alarm condition on the radio device.

This object contains the alarm name of the condition.

This object contains the alarm specific problem description. Indicates further refinements to the problem identified by the alarm type. If more than one specific problem is described in this object, the problem descriptions are separated by <;> characters. The format of the DisplayString is defined as follow: String | OID | ({String;}((OID | Integer);)*)

Used by Microwave notifications, the OID indicates the type of alarm condition on the radio device. Enumeration: 'environment': 5, 'communication': 1, 'processing': 3, 'qos': 2, 'equipment': 4.

Used by Microwave notifications, the OID indicates the object on the radio device that has the alarm condition.

Used by Microwave notifications, the OID indicates the sub-object on the radio device that has the alarm condition.

Used by Microwave notifications, the OID indicates the type of mute on the radio transmitter. Enumeration: 'noMute': 1, 'mute': 2.

Used by Microwave notifications, the OID indicates the port id where a microwave link.

Used by Microwave notifications, the OID indicates the the activity of the link of a protection scheme. Enumeration: 'both': 3, 'main': 1, 'spare': 2.

Used by Microwave notifications, the OID indicates the the type of protection. Enumeration: 'rps': 3, 'tps': 2, 'eps': 1.

Used by Microwave notifications, the OID indicates the the state of radio software.

Generated when a microwave radio link goes up.

Generated when a microwave radio link goes down.

Generated when a microwave radio device is detected.

Generated when a microwave radio device is no longer detected.

Generated when a valid microwave radio software package is not present at startup.

Generated when a microwave radio database has been updated.

This notification reports the critical radio defect raise.

This notification reports critical defect radio clear.

This notification reports the major radio defect raise.

This notification reports major defect radio clear.

This notification reports the minor radio defect raise.

This notification reports minor defect radio clear.

This notification reports the warning radio defect raise.

This notification reports warning defect radio clear.

This notification reports the indeterminate radio defect raise.

This notification reports indeterminate defect radio clear.

Generated when a microwave radio transmitter changes state.

Generated when a microwave link changes activity for EPS.

Generated when a microwave link changes activity for TPS.

Generated when a microwave link changes activity for RPS.

Generated when a microwave link maintenance command changes.

Generated when a microwave link discovered peer changes.

Generated when on microwave radio software state changes.

Generated when microwave radio RSL History upload fails.

Generated when microwave MPT sw reconcile fails.

Generated when microwave radio RSL History is cleared.

Generated when microwave radio G826 PM becomes operationally up.

Generated when microwave radio G826 PM becomes operationally down.

Generated when microwave radio ACM PM becomes operationally up.

Generated when microwave radio ACM PM becomes operationally down.

Generated when microwave radio power PM becomes operationally up.

Generated when microwave radio power PM becomes operationally down.