ALTIGA-PPTP-STATS-MIB: View SNMP OID List / Download MIB

VENDOR: ALTIGA NETWORKS


 Home MIB: ALTIGA-PPTP-STATS-MIB
Download as:   
SNMPv2-CONF, ALTIGA-GLOBAL-REG, SNMPv2-SMI, ALTIGA-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 altigaPptpStatsMibModule 1.3.6.1.4.1.3076.1.1.10.2
The Altiga PPTP Statistics MIB models counters and objects that are of management interest for PPTP tunnels. Acronyms The following acronyms are used in this document: MIB: Management Information Base PPTP: Point-to-Point Tunneling Protocol
     altigaPptpStatsMibConformance 1.3.6.1.4.1.3076.1.1.10.2.1
         altigaPptpStatsMibCompliances 1.3.6.1.4.1.3076.1.1.10.2.1.1
             altigaPptpStatsMibCompliance 1.3.6.1.4.1.3076.1.1.10.2.1.1.1
The compliance statement for agents which implement the Altiga PPTP Statistics MIB.
       altigaPptpStatsGroup 1.3.6.1.4.1.3076.2.1.1.1.3.2
The objects for PPTP statistics.
   alStatsPptpGlobal 1.3.6.1.4.1.3076.2.1.2.3.1
       alPptpStatsLocalProtVers 1.3.6.1.4.1.3076.2.1.2.3.1.1 octet string read-only
This object describes the protocol version and revision of the local implementation. The first octet contains the protocol version. The second octet contains the protocol revision.
       alPptpStatsLocalFraming 1.3.6.1.4.1.3076.2.1.2.3.1.2 integer32 read-only
A set of bits indicating the PPTP framing capabilities of this system.
       alPptpStatsLocalBearer 1.3.6.1.4.1.3076.2.1.2.3.1.3 integer32 read-only
A set of bits indicating the PPTP bearer capabilities of this system.
       alPptpStatsLocalFirmwareRev 1.3.6.1.4.1.3076.2.1.2.3.1.4 octet string read-only
This object defines the local firmware revision.
       alPptpStatsTotalTunnels 1.3.6.1.4.1.3076.2.1.2.3.1.5 gauge32 read-only
This object returns the total number of tunnels, including those that did not reach the established state.
       alPptpStatsActiveTunnels 1.3.6.1.4.1.3076.2.1.2.3.1.6 gauge32 read-only
This object returns the number of tunnels that are currently active.
       alPptpStatsMaxTunnels 1.3.6.1.4.1.3076.2.1.2.3.1.7 gauge32 read-only
The maximum number of simultaneously active PPTP tunnels since the system was booted.
       alPptpStatsTotalSessions 1.3.6.1.4.1.3076.2.1.2.3.1.8 gauge32 read-only
This object returns the total number of sessions, including those that did not reach the established state.
       alPptpStatsActiveSessions 1.3.6.1.4.1.3076.2.1.2.3.1.9 gauge32 read-only
This object returns the number of sessions that are currently active.
       alPptpStatsMaxSessions 1.3.6.1.4.1.3076.2.1.2.3.1.10 gauge32 read-only
The maximum number of simultaneously active PPTP sessions since the system was booted.
       alPptpStatsControlRecvOctets 1.3.6.1.4.1.3076.2.1.2.3.1.11 counter32 read-only
This object returns the number of control channel octets received.
       alPptpStatsControlRecvPackets 1.3.6.1.4.1.3076.2.1.2.3.1.12 counter32 read-only
This object returns the number of control packets received.
       alPptpStatsControlRecvDiscards 1.3.6.1.4.1.3076.2.1.2.3.1.13 counter32 read-only
This object returns the number of control packets received that were discarded.
       alPptpStatsControlSendOctets 1.3.6.1.4.1.3076.2.1.2.3.1.14 counter32 read-only
This object returns the number of control channel octets that were transmitted to tunnel endpoints.
       alPptpStatsControlSendPackets 1.3.6.1.4.1.3076.2.1.2.3.1.15 counter32 read-only
This object returns the number of control packets that were transmitted to tunnel endpoints.
       alPptpStatsPayloadRecvOctets 1.3.6.1.4.1.3076.2.1.2.3.1.16 counter32 read-only
This object returns the number of payload channel octets that were received.
       alPptpStatsPayloadRecvPackets 1.3.6.1.4.1.3076.2.1.2.3.1.17 counter32 read-only
This object returns the number of payload packets that were received.
       alPptpStatsPayloadRecvDiscards 1.3.6.1.4.1.3076.2.1.2.3.1.18 counter32 read-only
This object returns the number of received payload packets that were discarded.
       alPptpStatsPayloadSendOctets 1.3.6.1.4.1.3076.2.1.2.3.1.19 counter32 read-only
This object returns the number of payload channel octets that were transmitted to tunnel peers.
       alPptpStatsPayloadSendPackets 1.3.6.1.4.1.3076.2.1.2.3.1.20 counter32 read-only
This object returns the number of payload packets that were transmitted to tunnel peers.
   alPptpStatsTunnelTable 1.3.6.1.4.1.3076.2.1.2.3.2 no-access
The PPTP tunnel status and statistics table.
       alPptpStatsTunnelEntry 1.3.6.1.4.1.3076.2.1.2.3.2.1 no-access
An entry in the alPptpStatsTunnelTable.
           alPptpStatsTunnelRowStatus 1.3.6.1.4.1.3076.2.1.2.3.2.1.1 rowstatus read-write
The status of this row. Used to terminate the tunnel, cannot be used to create a tunnel.
           alPptpStatsTunnelPeerIpAddr 1.3.6.1.4.1.3076.2.1.2.3.2.1.2 ipaddress read-only
The peer's IP address for this tunnel.
           alPptpStatsTunnelDatastreamId 1.3.6.1.4.1.3076.2.1.2.3.2.1.3 integer32 read-only
The IP-GRE datastream ID of this tunnel.
           alPptpStatsTunnelLocalIpAddr 1.3.6.1.4.1.3076.2.1.2.3.2.1.4 ipaddress read-only
The local IP address for this tunnel.
           alPptpStatsTunnelPeerHostName 1.3.6.1.4.1.3076.2.1.2.3.2.1.5 displaystring read-only
The peer's host name, as indicated by the peer in a Start-Control-Connection packet.
           alPptpStatsTunnelPeerVendorName 1.3.6.1.4.1.3076.2.1.2.3.2.1.6 displaystring read-only
The peer's vendor name, as indicated by the peer in a Start-Control-Connection packet.
           alPptpStatsTunnelPeerFirmwareRev 1.3.6.1.4.1.3076.2.1.2.3.2.1.7 octet string read-only
This object contains the tunnel peer's firmware revision number. If the tunnel is idle this object should maintain its value from the last time it was connected.
           alPptpStatsTunnelPeerProtVers 1.3.6.1.4.1.3076.2.1.2.3.2.1.8 octet string read-only
This object describes the protocol version and revision of the tunnel peers implementation. The first octet contains the protocol version. The second octet contains the protocol revision.
           alPptpStatsTunnelPeerFramingCap 1.3.6.1.4.1.3076.2.1.2.3.2.1.9 integer32 read-only
This object describes the Framing Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected.
           alPptpStatsTunnelPeerBearerCap 1.3.6.1.4.1.3076.2.1.2.3.2.1.10 integer32 read-only
This object describes the Bearer Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected.
           alPptpStatsTunnelPeerMaxChan 1.3.6.1.4.1.3076.2.1.2.3.2.1.11 integer32 read-only
The peer's maximum channels value, as indicated by the peer in a Start-Control-Connection packet.
           alPptpStatsTunnelActiveSessions 1.3.6.1.4.1.3076.2.1.2.3.2.1.12 counter32 read-only
This object contains the total number of sessions for this tunnel.
   alPptpStatsSessionTable 1.3.6.1.4.1.3076.2.1.2.3.3 no-access
List of active sessions within tunnels.
       alPptpStatsSessionEntry 1.3.6.1.4.1.3076.2.1.2.3.3.1 no-access
An entry in the alPptpStatsSessionTable.
           alPptpStatsSessionRowStatus 1.3.6.1.4.1.3076.2.1.2.3.3.1.1 rowstatus read-write
The status of this row. Used to terminate the session, cannot be used to create a Session.
           alPptpStatsSessionDatastreamId 1.3.6.1.4.1.3076.2.1.2.3.3.1.2 integer32 read-only
The GRE-PPP datastream ID of this tunnel, used as the index for this row.
           alPptpStatsSessionLocalCallId 1.3.6.1.4.1.3076.2.1.2.3.3.1.3 integer32 read-only
The local call ID within the tunnel of the session represented by this row.
           alPptpStatsSessionPeerCallId 1.3.6.1.4.1.3076.2.1.2.3.3.1.4 integer32 read-only
The peer call ID within the tunnel of the session represented by this row.
           alPptpStatsSessionUserName 1.3.6.1.4.1.3076.2.1.2.3.3.1.5 displaystring read-only
This object identifies the peer session name on this interface. This is typically the login name of the remote user. If the user name is unknown to the local tunnel peer then this object will contain a null string.
           alPptpStatsSessionSerial 1.3.6.1.4.1.3076.2.1.2.3.3.1.6 integer32 read-only
The call serial number within the tunnel of the session represented by this row.
           alPptpStatsSessionMinimumSpeed 1.3.6.1.4.1.3076.2.1.2.3.3.1.7 integer32 read-only
The lowest acceptable line speed (in bits/second) for this session, as indicated in the Call-Request packet.
           alPptpStatsSessionMaximumSpeed 1.3.6.1.4.1.3076.2.1.2.3.3.1.8 integer32 read-only
The highest acceptable line speed (in bits/second) for this session, as indicated in the Call-Request packet.
           alPptpStatsSessionConnectSpeed 1.3.6.1.4.1.3076.2.1.2.3.3.1.9 integer32 read-only
The actual line speed (in bits/second) for this session.
           alPptpStatsSessionBearerType 1.3.6.1.4.1.3076.2.1.2.3.3.1.10 integer read-only
A value indicating the bearer capability required for this session. Enumeration: 'any': 3, 'analog': 1, 'digital': 2.
           alPptpStatsSessionFramingType 1.3.6.1.4.1.3076.2.1.2.3.3.1.11 integer read-only
A value indicating the framing capability required for this session. Enumeration: 'synchronous': 2, 'asynchronous': 1, 'either': 3.
           alPptpStatsSessionPhysicalChannel 1.3.6.1.4.1.3076.2.1.2.3.3.1.12 integer32 read-only
The physical channel number used for this session.
           alPptpStatsSessionLocalWindowSize 1.3.6.1.4.1.3076.2.1.2.3.3.1.13 integer32 read-only
The number of received data packets this system will buffer for this session, as indicated in the setup packets for this session.
           alPptpStatsSessionPeerWindowSize 1.3.6.1.4.1.3076.2.1.2.3.3.1.14 integer32 read-only
The number of received data packets the peer will buffer for this session, as indicated in the setup packets for this session.
           alPptpStatsSessionLocalPpd 1.3.6.1.4.1.3076.2.1.2.3.3.1.15 integer32 read-only
A measure of the packet processing delay that might be imposed on data sent to this system, in units of 1/10 seconds.
           alPptpStatsSessionPeerPpd 1.3.6.1.4.1.3076.2.1.2.3.3.1.16 integer32 read-only
A measure of the packet processing delay that might be imposed on data sent to the peer, in units of 1/10 seconds.
           alPptpStatsSessionRecvOctets 1.3.6.1.4.1.3076.2.1.2.3.3.1.17 counter32 read-only
This object returns the total number payload octets received for this session.
           alPptpStatsSessionRecvPackets 1.3.6.1.4.1.3076.2.1.2.3.3.1.18 counter32 read-only
This object returns the total number of payload packets received for this session.
           alPptpStatsSessionRecvDiscards 1.3.6.1.4.1.3076.2.1.2.3.3.1.19 counter32 read-only
This object returns the total number of payload packets received that were discarded for this session.
           alPptpStatsSessionRecvZLB 1.3.6.1.4.1.3076.2.1.2.3.3.1.20 counter32 read-only
This object returns the total number of Zero Length Body acknowlegement payload packets received for this session.
           alPptpStatsSessionSendOctets 1.3.6.1.4.1.3076.2.1.2.3.3.1.21 counter32 read-only
This object returns the total number of payload octets transmitted for this session.
           alPptpStatsSessionSendPackets 1.3.6.1.4.1.3076.2.1.2.3.3.1.22 counter32 read-only
This object returns the total number of payload packets transmitted for this session.
           alPptpStatsSessionSendZLB 1.3.6.1.4.1.3076.2.1.2.3.3.1.23 counter32 read-only
This object returns the total number of Zero Length Body acknowledgement packets transmitted for this session.
           alPptpStatsSessionAckTimeouts 1.3.6.1.4.1.3076.2.1.2.3.3.1.24 counter32 read-only
This object returns the total number of acknowledgement timeouts seen on payload packets for this session.
           alPptpStatsSessionLocalFlowOff 1.3.6.1.4.1.3076.2.1.2.3.3.1.25 truthvalue read-only
Indicates whether the session is in a locally flowed-off state because the number of outstanding unacknowledged packets received from the peer is equal to the local window size.
           alPptpStatsSessionPeerFlowOff 1.3.6.1.4.1.3076.2.1.2.3.3.1.26 truthvalue read-only
Indicates whether the session peer is in a flowed-off state because the number of outstanding unacknowledged packets sent to the peer is equal to the peer's window size.
           alPptpStatsSessionOutOfWindow 1.3.6.1.4.1.3076.2.1.2.3.3.1.27 counter32 read-only
The number of data packets received from the peer which were received outside of the offered receive window.
           alPptpStatsSessionOutOfSequence 1.3.6.1.4.1.3076.2.1.2.3.3.1.28 counter32 read-only
The number of data packets that were not received in the correct order (as per the sequence number).
           alPptpStatsSessionTunnelPeerIpAddr 1.3.6.1.4.1.3076.2.1.2.3.3.1.29 ipaddress read-only
The peer's IP address for the tunnel over which this session is established.