ALTEON-PRIVATE-MIBS: View SNMP OID List / Download MIB

VENDOR: ALTEON NETWORKS


 Home MIB: ALTEON-PRIVATE-MIBS
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 alteon 1.3.6.1.4.1.1872
           registration 1.3.6.1.4.1.1872.1
           private_mibs 1.3.6.1.4.1.1872.2
               switch 1.3.6.1.4.1.1872.2.1
                   hardware 1.3.6.1.4.1.1872.2.1.1
                       hwPartNumber 1.3.6.1.4.1.1872.2.1.1.1 displaystring read-only
The hardware part number of the Alteon Switch.
                       hwRevision 1.3.6.1.4.1.1872.2.1.1.2 displaystring read-only
The hardware revision. If the revision is not available, a zero length string should be returned.
                       hwPowerSupplyStatus 1.3.6.1.4.1.1872.2.1.1.3 integer read-only
The status of the internal power supply. Enumeration: 'bad': 2, 'ok': 1.
                       hwRedundantPSPresent 1.3.6.1.4.1.1872.2.1.1.4 integer read-only
Existence of redundant power supply. Enumeration: 'notPresent': 3, 'present': 4.
                       hwRedundantPSStatus 1.3.6.1.4.1.1872.2.1.1.5 integer read-only
The status of the redundant power supply. Enumeration: 'bad': 2, 'ok': 1, 'notPresent': 3.
                       hwSensor1Temp 1.3.6.1.4.1.1872.2.1.1.6 integer read-only
The temperature in degrees Celcius of the sensor number 1.
                       hwSensor2Temp 1.3.6.1.4.1.1872.2.1.1.7 integer read-only
The temperature in degrees Celcius of the sensor number 2.
                       hwSensor3Temp 1.3.6.1.4.1.1872.2.1.1.8 integer read-only
The temperature in degrees Celcius of the sensor number 3.
                       hwSensor4Temp 1.3.6.1.4.1.1872.2.1.1.9 integer read-only
The temperature in degrees Celcius of the sensor number 4.
                   agent 1.3.6.1.4.1.1872.2.1.2
                       agGeneral 1.3.6.1.4.1.1872.2.1.2.1
                           agSaveConfiguration 1.3.6.1.4.1.1872.2.1.2.1.1 integer read-write
This is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to backup in flash and then the new configuration is saved to the active configuration in flash. When issued with notSaveActive, the active configuration is NOT saved to the flash and the active configuration is overwritten with the new configuration. ok(1) is returned always when read. Enumeration: 'notSaveActive': 3, 'ok': 1, 'saveActive': 2.
                           agApplyConfiguration 1.3.6.1.4.1.1872.2.1.2.1.2 integer read-write
This is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply are written to the new_config block. other(1) is returned when this object ie read. Enumeration: 'apply': 2, 'other': 1.
                           agApplyPending 1.3.6.1.4.1.1872.2.1.2.1.3 integer read-only
This object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user then can apply the changes by setting proper value to the object agApplyConfiguration described above. Enumeration: 'applyNeeded': 2, 'other': 1, 'noApplyNeeded': 3.
                           agReset 1.3.6.1.4.1.1872.2.1.2.1.4 integer read-write
This is an action object to reboot the agent. other(1) is returned always when read. The following values are writable: coldReset(2)... warmReset(3)... Enumeration: 'warmReset': 3, 'other': 1, 'coldReset': 2.
                           agConfigForNxtReset 1.3.6.1.4.1.1872.2.1.2.1.5 integer read-write
The configuration information to be loaded from at next reset. other(1)...unknown configuration (read-only) The following values are writable: active(2)...active configuration block backup(3)...backup configuration block default(4)..default configuration block Enumeration: 'active': 2, 'default': 4, 'other': 1, 'backup': 3.
                           agImageForNxtReset 1.3.6.1.4.1.1872.2.1.2.1.6 integer read-write
The software image to be booted from at next reset. other(1)...unknown image (read-only) The following values are writable: image1(2)...image 1 image2(3)...image 2 Enumeration: 'image2': 3, 'image1': 2, 'other': 1.
                           agSoftwareVersion 1.3.6.1.4.1.1872.2.1.2.1.7 displaystring read-only
The version of the software image that is currently running on the system in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available.
                           agBootVer 1.3.6.1.4.1.1872.2.1.2.1.8 displaystring read-only
The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available.
                           agImage1Ver 1.3.6.1.4.1.1872.2.1.2.1.9 displaystring read-only
The version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image.
                           agImage2Ver 1.3.6.1.4.1.1872.2.1.2.1.10 displaystring read-only
The version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image.
                           agRtcDate 1.3.6.1.4.1.1872.2.1.2.1.11 displaystring read-write
The date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available.
                           agRtcTime 1.3.6.1.4.1.1872.2.1.2.1.12 displaystring read-write
The time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if date is not available.
                           agTftpServerIpAddr 1.3.6.1.4.1.1872.2.1.2.1.13 ipaddress read-write
The TFTP server IP address.
                           agTftpImageFileName 1.3.6.1.4.1.1872.2.1.2.1.14 displaystring read-write
The image file name to be downloaded.
                           agTftpImage 1.3.6.1.4.1.1872.2.1.2.1.15 integer read-write
Whether the image file should be loaded in image1 or image2 in flash. Enumeration: 'image2': 3, 'image1': 2, 'other': 1.
                           agTftpDownload 1.3.6.1.4.1.1872.2.1.2.1.16 integer read-write
This is an action object to cause to download software image according to the setup of agTftpServerIpAddr, agTftpImageFileName, agTftpImage when download(2) is issued. other(1) is returned always when read. Enumeration: 'download': 2, 'other': 1.
                           agLastSetErrorReason 1.3.6.1.4.1.1872.2.1.2.1.17 displaystring read-only
The error reason of the last SET failure.
                           agTftpServer 1.3.6.1.4.1.1872.2.1.2.1.18 displaystring read-write
The TFTP server IP address or domain name.
                           agTftpCfgFileName 1.3.6.1.4.1.1872.2.1.2.1.19 displaystring read-write
The configuration file name.
                           agTftpDumpFileName 1.3.6.1.4.1.1872.2.1.2.1.20 displaystring read-write
The file name for core dump.
                           agTftpAction 1.3.6.1.4.1.1872.2.1.2.1.21 integer read-write
This is an action object to perform various TFTP Get or Put functions. The TFTP sever is specified in agTftpServer object. img-get(2) - Download switch image from a specified image file (agTftpImageFileName) on the TFTP server to the destinated storage (agTftpImage). cfg-get(3) - Download switch configuration from a specified file (agTftpCfgFileName) on the TFTP server. cfg-put(4) - Upload switch configuration to a specified file (agTftpCfgFileName) on the TFTP server. dump-put(5)- Download switch core dump to a specified file (agTftpDumpFileName) on the TFTP server. other(1) is returned always when read. Enumeration: 'img-get': 2, 'other': 1, 'dump-put': 5, 'cfg-get': 3, 'cfg-put': 4.
                           agTftpLastActionStatus 1.3.6.1.4.1.1872.2.1.2.1.22 displaystring read-only
The recorded status of the previous TFTP activity.
                           agEnabledSwFeatures 1.3.6.1.4.1.1872.2.1.2.1.25 displaystring read-only
The software features that are enabled on the switch.
                       agGeneralConfig 1.3.6.1.4.1.1872.2.1.2.2
                           agNewCfgSyslogHost 1.3.6.1.4.1.1872.2.1.2.2.1 ipaddress read-write
The syslog host IP address, in the new_configuration block.
                           agCurCfgSyslogHost 1.3.6.1.4.1.1872.2.1.2.2.2 ipaddress read-only
The syslog host IP address, as currently configured in the current_configuration block.
                           agNewCfgBootp 1.3.6.1.4.1.1872.2.1.2.2.3 integer read-write
Enable or disable the use of BootP, in the new_configuration block. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                           agCurCfgBootp 1.3.6.1.4.1.1872.2.1.2.2.4 integer read-only
Enable or disable the use of BootP, as currently configured in the current_configuration block. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                           agNewCfgSpanningTree 1.3.6.1.4.1.1872.2.1.2.2.5 integer read-write
Turn On or Off Spanning Tree Protocol for the switch, in the new_configuration block. Enumeration: 'on': 2, 'other': 1, 'off': 3.
                           agCurCfgSpanningTree 1.3.6.1.4.1.1872.2.1.2.2.6 integer read-only
The state of Spanning Tree Protocol for the switch, as currently configured in the current_configuration block. Enumeration: 'on': 2, 'other': 1, 'off': 3.
                           agTrapHostTableMaxEnt 1.3.6.1.4.1.1872.2.1.2.2.7 integer read-only
The maximum number of rows in the trap host table.
                           agCurCfgTrapHostTable 1.3.6.1.4.1.1872.2.1.2.2.8 no-access
The table of trap hosts which to send SNMP traps in the current_configuration block.
                               agCurCfgTrapHostEntry 1.3.6.1.4.1.1872.2.1.2.2.8.1 no-access
A row in the trap host table in the current_configuration block.
                                   agCurCfgTrapHostIndx 1.3.6.1.4.1.1872.2.1.2.2.8.1.1 integer read-only
The index of the row in trap host table.
                                   agCurCfgTrapHostIpAddr 1.3.6.1.4.1.1872.2.1.2.2.8.1.2 ipaddress read-only
The IP address of a trap host.
                                   agCurCfgTrapHostCommString 1.3.6.1.4.1.1872.2.1.2.2.8.1.3 displaystring read-only
The SNMP community string to use with the trap host
                           agNewCfgTrapHostTable 1.3.6.1.4.1.1872.2.1.2.2.9 no-access
The table of trap hosts which to send SNMP traps in the new_configuration block.
                               agNewCfgTrapHostEntry 1.3.6.1.4.1.1872.2.1.2.2.9.1 no-access
A row in the trap host table in the new_configuration block.
                                   agNewCfgTrapHostIndx 1.3.6.1.4.1.1872.2.1.2.2.9.1.1 integer read-only
The index of the row in trap host table.
                                   agNewCfgTrapHostIpAddr 1.3.6.1.4.1.1872.2.1.2.2.9.1.2 ipaddress read-write
The IP address of a trap host.
                                   agNewCfgTrapHostCommString 1.3.6.1.4.1.1872.2.1.2.2.9.1.3 displaystring read-write
The SNMP community string to use with the trap host
                           agCurCfgHttpServerPort 1.3.6.1.4.1.1872.2.1.2.2.10 integer read-only
The TCP port number that the HTTP server is listening to in the new_configuration block. Enumeration: 'on': 2, 'other': 1, 'off': 3.
                           agNewCfgHttpServerPort 1.3.6.1.4.1.1872.2.1.2.2.11 integer read-write
The TCP port number that the HTTP server is listening to in the new_configuration block.
                           agCurCfgLoginBanner 1.3.6.1.4.1.1872.2.1.2.2.12 displaystring read-only
The user defined login banner.
                           agNewCfgLoginBanner 1.3.6.1.4.1.1872.2.1.2.2.13 displaystring read-write
The user defined login banner.
                           agNewCfgSyslog2Host 1.3.6.1.4.1.1872.2.1.2.2.14 ipaddress read-write
The second syslog host IP address, in the new_configuration block.
                           agCurCfgSyslog2Host 1.3.6.1.4.1.1872.2.1.2.2.15 ipaddress read-only
The second syslog host IP address, as currently configured in the current_configuration block.
                           agCurCfgSyslogFac 1.3.6.1.4.1.1872.2.1.2.2.16 integer read-only
The facility of syslog host in the current_configuration block. Enumeration: 'local5': 6, 'local4': 5, 'local7': 8, 'local6': 7, 'local1': 2, 'local0': 1, 'local3': 4, 'local2': 3.
                           agNewCfgSyslogFac 1.3.6.1.4.1.1872.2.1.2.2.17 integer read-write
The facility of syslog host in the new_configuration block. Enumeration: 'local5': 6, 'local4': 5, 'local7': 8, 'local6': 7, 'local1': 2, 'local0': 1, 'local3': 4, 'local2': 3.
                           agCurCfgSyslog2Fac 1.3.6.1.4.1.1872.2.1.2.2.18 integer read-only
The facility of syslog2 host in the current_configuration block. Enumeration: 'local5': 6, 'local4': 5, 'local7': 8, 'local6': 7, 'local1': 2, 'local0': 1, 'local3': 4, 'local2': 3.
                           agNewCfgSyslog2Fac 1.3.6.1.4.1.1872.2.1.2.2.19 integer read-write
The facility of syslogs host in the new_configuration block. Enumeration: 'local5': 6, 'local4': 5, 'local7': 8, 'local6': 7, 'local1': 2, 'local0': 1, 'local3': 4, 'local2': 3.
                           agCurCfgSmtpHost 1.3.6.1.4.1.1872.2.1.2.2.20 displaystring read-only
The user defined SMTP host.
                           agNewCfgSmtpHost 1.3.6.1.4.1.1872.2.1.2.2.21 displaystring read-write
The user defined SMTP host.
                       agPortConfig 1.3.6.1.4.1.1872.2.1.2.3
                           agPortTableMaxEnt 1.3.6.1.4.1.1872.2.1.2.3.1 integer read-only
The maximum number of rows in the port configuration host table.
                           agPortCurCfgTable 1.3.6.1.4.1.1872.2.1.2.3.2 no-access
The table of port configuration in the current_configuration block.
                               agPortCurCfgTableEntry 1.3.6.1.4.1.1872.2.1.2.3.2.1 no-access
A row in the port configuration table in the current_configuration block.
                                   agPortCurCfgIndx 1.3.6.1.4.1.1872.2.1.2.3.2.1.1 integer read-only
The index of the row in port configurations table.
                                   agPortCurCfgPrefLink 1.3.6.1.4.1.1872.2.1.2.3.2.1.2 integer read-only
This is the preferred link. Enumeration: 'other': 1, 'fast-ethernet': 2, 'gigabit-ethernet': 3.
                                   agPortCurCfgBackLink 1.3.6.1.4.1.1872.2.1.2.3.2.1.3 integer read-only
This is the backup link. Enumeration: 'none': 4, 'other': 1, 'fast-ethernet': 2, 'gigabit-ethernet': 3.
                                   agPortCurCfgState 1.3.6.1.4.1.1872.2.1.2.3.2.1.4 integer read-only
This is the state of the port. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                                   agPortCurCfgVlanTag 1.3.6.1.4.1.1872.2.1.2.3.2.1.5 integer read-only
This is VLAN tag state of the port Enumeration: 'untagged': 3, 'tagged': 2, 'other': 1.
                                   agPortCurCfgStp 1.3.6.1.4.1.1872.2.1.2.3.2.1.6 integer read-only
This object is used to turn Spanning Tree on or off for the port. Enumeration: 'on': 2, 'other': 1, 'off': 3.
                                   agPortCurCfgRmon 1.3.6.1.4.1.1872.2.1.2.3.2.1.7 integer read-only
This object is used to turn RMON on or off on the port. Enumeration: 'on': 2, 'other': 1, 'off': 3.
                                   agPortCurCfgPVID 1.3.6.1.4.1.1872.2.1.2.3.2.1.8 integer read-only
The default VLAN ID for the port.
                                   agPortCurCfgFastEthAutoNeg 1.3.6.1.4.1.1872.2.1.2.3.2.1.9 integer read-only
This object is used to turn the autonegotiation on or off for fast Ethernet connection. Enumeration: 'on': 2, 'other': 1, 'off': 3.
                                   agPortCurCfgFastEthSpeed 1.3.6.1.4.1.1872.2.1.2.3.2.1.10 integer read-only
This object is used to select port speed for fast Ethernet connection. Enumeration: 'mbs10or100': 4, 'mbs10': 2, 'other': 1, 'mbs100': 3.
                                   agPortCurCfgFastEthMode 1.3.6.1.4.1.1872.2.1.2.3.2.1.11 integer read-only
This object is used to select port mode for fast Ethernet connection. Enumeration: 'half-duplex': 3, 'other': 1, 'full-duplex': 2, 'full-or-half-duplex': 4.
                                   agPortCurCfgFastEthFctl 1.3.6.1.4.1.1872.2.1.2.3.2.1.12 integer read-only
This object is used to select port flow control for fast Ethernet connection. Enumeration: 'transmit': 2, 'receive': 3, 'none': 5, 'other': 1, 'both': 4.
                                   agPortCurCfgGigEthAutoNeg 1.3.6.1.4.1.1872.2.1.2.3.2.1.13 integer read-only
This object is used to turn the autonegotiation on or off for gigabit Ethernet connection. Enumeration: 'on': 2, 'other': 1, 'off': 3.
                                   agPortCurCfgGigEthFctl 1.3.6.1.4.1.1872.2.1.2.3.2.1.14 integer read-only
This object is used to select port flow control for gigabit Ethernet connection. Enumeration: 'transmit': 2, 'receive': 3, 'none': 5, 'other': 1, 'both': 4.
                                   agPortCurCfgPortName 1.3.6.1.4.1.1872.2.1.2.3.2.1.15 displaystring read-only
The switch port name.
                                   agPortCurCfgBwmContract 1.3.6.1.4.1.1872.2.1.2.3.2.1.16 integer read-only
The switch port Bandwidth Management contract number.
                                   agPortCurCfgDiscardNonIPs 1.3.6.1.4.1.1872.2.1.2.3.2.1.17 integer read-only
Enable or disable to discard all non-IP traffic on the switch port. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                           agPortNewCfgTable 1.3.6.1.4.1.1872.2.1.2.3.3 no-access
The table of port configuration in the new_configuration block.
                               agPortNewCfgTableEntry 1.3.6.1.4.1.1872.2.1.2.3.3.1 no-access
A row in the port configuration table in the new_configuration block.
                                   agPortNewCfgIndx 1.3.6.1.4.1.1872.2.1.2.3.3.1.1 integer read-only
The index of the row in port configurations table.
                                   agPortNewCfgPrefLink 1.3.6.1.4.1.1872.2.1.2.3.3.1.2 integer read-write
This is the preferred link. Enumeration: 'other': 1, 'fast-ethernet': 2, 'gigabit-ethernet': 3.
                                   agPortNewCfgBackLink 1.3.6.1.4.1.1872.2.1.2.3.3.1.3 integer read-write
This is the backup link. Enumeration: 'other': 1, 'fast-ethernet': 2, 'gigabit-ethernet': 3.
                                   agPortNewCfgState 1.3.6.1.4.1.1872.2.1.2.3.3.1.4 integer read-write
This is the state of the port. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                                   agPortNewCfgVlanTag 1.3.6.1.4.1.1872.2.1.2.3.3.1.5 integer read-write
This is VLAN tag state of the port Enumeration: 'untagged': 3, 'tagged': 2, 'other': 1.
                                   agPortNewCfgStp 1.3.6.1.4.1.1872.2.1.2.3.3.1.6 integer read-write
This object is used to turn Spanning Tree on or off for the port. Enumeration: 'on': 2, 'other': 1, 'off': 3.
                                   agPortNewCfgRmon 1.3.6.1.4.1.1872.2.1.2.3.3.1.7 integer read-write
This object is used to turn RMON on or off on the port. Enumeration: 'on': 2, 'other': 1, 'off': 3.
                                   agPortNewCfgPVID 1.3.6.1.4.1.1872.2.1.2.3.3.1.8 integer read-write
The default VLAN ID for the port.
                                   agPortNewCfgFastEthAutoNeg 1.3.6.1.4.1.1872.2.1.2.3.3.1.9 integer read-write
This object is used to turn the autonegotiation on or off for fast Ethernet connection. Enumeration: 'on': 2, 'other': 1, 'off': 3.
                                   agPortNewCfgFastEthSpeed 1.3.6.1.4.1.1872.2.1.2.3.3.1.10 integer read-write
This object is used to select port speed for fast Ethernet connection. Enumeration: 'mbs10or100': 4, 'mbs10': 2, 'other': 1, 'mbs100': 3.
                                   agPortNewCfgFastEthMode 1.3.6.1.4.1.1872.2.1.2.3.3.1.11 integer read-write
This object is used to select port mode for fast Ethernet connection. Enumeration: 'half-duplex': 3, 'other': 1, 'full-duplex': 2, 'full-or-half-duplex': 4.
                                   agPortNewCfgFastEthFctl 1.3.6.1.4.1.1872.2.1.2.3.3.1.12 integer read-write
This object is used to select port flow control for fast Ethernet connection. Enumeration: 'transmit': 2, 'receive': 3, 'none': 5, 'other': 1, 'both': 4.
                                   agPortNewCfgGigEthAutoNeg 1.3.6.1.4.1.1872.2.1.2.3.3.1.13 integer read-write
This object is used to turn the autonegotiation on or off for gigabit Ethernet connection. Enumeration: 'on': 2, 'other': 1, 'off': 3.
                                   agPortNewCfgGigEthFctl 1.3.6.1.4.1.1872.2.1.2.3.3.1.14 integer read-write
This object is used to select port flow control for gigabit Ethernet connection. Enumeration: 'transmit': 2, 'receive': 3, 'none': 5, 'other': 1, 'both': 4.
                                   agPortNewCfgPortName 1.3.6.1.4.1.1872.2.1.2.3.3.1.15 displaystring read-write
The switch port name.
                                   agPortNewCfgBwmContract 1.3.6.1.4.1.1872.2.1.2.3.3.1.16 integer read-write
The switch port Bandwidth Management contract number.
                                   agPortNewCfgDiscardNonIPs 1.3.6.1.4.1.1872.2.1.2.3.3.1.17 integer read-write
Enable or disable to discard all non-IP traffic on the switch port. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                   iprouting 1.3.6.1.4.1.1872.2.1.3
                       ipInterfaceTableMax 1.3.6.1.4.1.1872.2.1.3.1 integer read-only
The maximum number of rows in the Ip interface table.
                       ipCurCfgIntfTable 1.3.6.1.4.1.1872.2.1.3.2 no-access
The table of IP interface configuration.
                           ipCurCfgIntfEntry 1.3.6.1.4.1.1872.2.1.3.2.1 no-access
A row in the Ip interface table
                               ipCurCfgIntfIndex 1.3.6.1.4.1.1872.2.1.3.2.1.1 integer read-only
The interface number for which the IP information is related.
                               ipCurCfgIntfAddr 1.3.6.1.4.1.1872.2.1.3.2.1.2 ipaddress read-only
The IP address of the interface.
                               ipCurCfgIntfMask 1.3.6.1.4.1.1872.2.1.3.2.1.3 ipaddress read-only
The subnet mask of the interface.
                               ipCurCfgIntfBroadcast 1.3.6.1.4.1.1872.2.1.3.2.1.4 ipaddress read-only
The broadcast address of the interface.
                               ipCurCfgIntfVlan 1.3.6.1.4.1.1872.2.1.3.2.1.5 integer read-only
The VLAN associated with the interface.
                               ipCurCfgIntfState 1.3.6.1.4.1.1872.2.1.3.2.1.6 integer read-only
The state of the interface. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                       ipNewCfgIntfTable 1.3.6.1.4.1.1872.2.1.3.3 no-access
The table of interface configuration in the New Configuration Block.
                           ipNewCfgIntfEntry 1.3.6.1.4.1.1872.2.1.3.3.1 no-access
A row in the Ip interface table
                               ipNewCfgIntfIndex 1.3.6.1.4.1.1872.2.1.3.3.1.1 integer read-only
The interface number for which the IP information is related.
                               ipNewCfgIntfAddr 1.3.6.1.4.1.1872.2.1.3.3.1.2 ipaddress read-write
The IP address of the interface.
                               ipNewCfgIntfMask 1.3.6.1.4.1.1872.2.1.3.3.1.3 ipaddress read-write
The subnet mask of the interface.
                               ipNewCfgIntfBroadcast 1.3.6.1.4.1.1872.2.1.3.3.1.4 ipaddress read-write
The broadcast address of the interface.
                               ipNewCfgIntfVlan 1.3.6.1.4.1.1872.2.1.3.3.1.5 integer read-write
The VLAN associated with the interface.
                               ipNewCfgIntfState 1.3.6.1.4.1.1872.2.1.3.3.1.6 integer read-write
The state of the interface. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                               ipNewCfgIntfDelete 1.3.6.1.4.1.1872.2.1.3.3.1.7 integer read-write
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                       ipGatewayTableMax 1.3.6.1.4.1.1872.2.1.3.4 integer read-only
The maximum number of rows in the IP gateway table.
                       ipCurCfgGwTable 1.3.6.1.4.1.1872.2.1.3.5 no-access
The table of gateway configuration in the Current configuration Block.
                           ipCurCfgGwEntry 1.3.6.1.4.1.1872.2.1.3.5.1 no-access
A row in the Ip gateway table
                               ipCurCfgGwIndex 1.3.6.1.4.1.1872.2.1.3.5.1.1 integer read-only
The gateway number for which the information is related.
                               ipCurCfgGwAddr 1.3.6.1.4.1.1872.2.1.3.5.1.2 ipaddress read-only
The IP address of the default gateway.
                               ipCurCfgGwInterval 1.3.6.1.4.1.1872.2.1.3.5.1.3 integer read-only
The interval between ping attempts.
                               ipCurCfgGwRetry 1.3.6.1.4.1.1872.2.1.3.5.1.4 integer read-only
The number of failed attempts to declare the default gateway DOWN.
                               ipCurCfgGwState 1.3.6.1.4.1.1872.2.1.3.5.1.5 integer read-only
The state of the default gateway. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                               ipCurCfgGwArp 1.3.6.1.4.1.1872.2.1.3.5.1.6 integer read-only
The state of ARP only health checks. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                       ipNewCfgGwTable 1.3.6.1.4.1.1872.2.1.3.6 no-access
The table of default gateway configuration in the New Configuration Block.
                           ipNewCfgGwEntry 1.3.6.1.4.1.1872.2.1.3.6.1 no-access
A row in the Ip default gateway table
                               ipNewCfgGwIndex 1.3.6.1.4.1.1872.2.1.3.6.1.1 integer read-only
The gateway number for which the information is related.
                               ipNewCfgGwAddr 1.3.6.1.4.1.1872.2.1.3.6.1.2 ipaddress read-write
The IP address of the default gateway.
                               ipNewCfgGwInterval 1.3.6.1.4.1.1872.2.1.3.6.1.3 integer read-write
The interval in seconds between ping attempts.
                               ipNewCfgGwRetry 1.3.6.1.4.1.1872.2.1.3.6.1.4 integer read-write
The number of failed attempts to declare the default gateway DOWN.
                               ipNewCfgGwState 1.3.6.1.4.1.1872.2.1.3.6.1.5 integer read-write
The state of the default gateway. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                               ipNewCfgGwDelete 1.3.6.1.4.1.1872.2.1.3.6.1.6 integer read-write
When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                               ipNewCfgGwArp 1.3.6.1.4.1.1872.2.1.3.6.1.7 integer read-write
The state of the ARP only health checks. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                       ipCurCfgStaticRouteTable 1.3.6.1.4.1.1872.2.1.3.7 no-access
The table of static routes in the current configuration block.
                           ipCurCfgStaticRouteEntry 1.3.6.1.4.1.1872.2.1.3.7.1 no-access
A row in the static IP route table
                               ipCurCfgStaticRouteIndx 1.3.6.1.4.1.1872.2.1.3.7.1.1 integer read-only
The index of the static routing table.
                               ipCurCfgStaticRouteDestIp 1.3.6.1.4.1.1872.2.1.3.7.1.2 ipaddress read-only
The destination IP address of this route.
                               ipCurCfgStaticRouteMask 1.3.6.1.4.1.1872.2.1.3.7.1.3 ipaddress read-only
The destination IP address of this route.
                               ipCurCfgStaticRouteGateway 1.3.6.1.4.1.1872.2.1.3.7.1.4 ipaddress read-only
The destination IP address of this route.
                               ipCurCfgStaticRouteInterface 1.3.6.1.4.1.1872.2.1.3.7.1.5 integer read-only
The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
                       ipNewCfgStaticRouteTable 1.3.6.1.4.1.1872.2.1.3.8 no-access
The table of static routes in the new configuration block.
                           ipNewCfgStaticRouteEntry 1.3.6.1.4.1.1872.2.1.3.8.1 no-access
A row in the static IP route table
                               ipNewCfgStaticRouteIndx 1.3.6.1.4.1.1872.2.1.3.8.1.1 integer read-only
The index of the static routing table.
                               ipNewCfgStaticRouteDestIp 1.3.6.1.4.1.1872.2.1.3.8.1.2 ipaddress read-write
The destination IP address of this route.
                               ipNewCfgStaticRouteMask 1.3.6.1.4.1.1872.2.1.3.8.1.3 ipaddress read-write
The subnet mask of this route.
                               ipNewCfgStaticRouteGateway 1.3.6.1.4.1.1872.2.1.3.8.1.4 ipaddress read-write
The IP address of the gateway for this route.
                               ipNewCfgStaticRouteAction 1.3.6.1.4.1.1872.2.1.3.8.1.5 integer read-write
When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                               ipNewCfgStaticRouteInterface 1.3.6.1.4.1.1872.2.1.3.8.1.6 integer read-write
The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
                       ipForward 1.3.6.1.4.1.1872.2.1.3.9
                           ripConfig 1.3.6.1.4.1.1872.2.1.3.9.1
                               ripCurCfgSupply 1.3.6.1.4.1.1872.2.1.3.9.1.1 integer read-only
Enable or disable supplying route updates. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                               ripNewCfgSupply 1.3.6.1.4.1.1872.2.1.3.9.1.2 integer read-write
Enable or disable supplying route updates. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                               ripCurCfgListen 1.3.6.1.4.1.1872.2.1.3.9.1.3 integer read-only
Enable or disable listening to route updates. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                               ripNewCfgListen 1.3.6.1.4.1.1872.2.1.3.9.1.4 integer read-write
Enable or disable listening to route updates. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                               ripCurCfgDefListen 1.3.6.1.4.1.1872.2.1.3.9.1.5 integer read-only
Enable or disable listening to default routes. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                               ripNewCfgDefListen 1.3.6.1.4.1.1872.2.1.3.9.1.6 integer read-write
Enable or disable listening to default routes. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                               ripCurCfgStaticSupply 1.3.6.1.4.1.1872.2.1.3.9.1.7 integer read-only
Enable or disable supplying static route updates. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                               ripNewCfgStaticSupply 1.3.6.1.4.1.1872.2.1.3.9.1.8 integer read-write
Enable or disable supplying static route updates. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                               ripCurCfgUpdatePeriod 1.3.6.1.4.1.1872.2.1.3.9.1.9 integer read-only
Update Period in seconds.
                               ripNewCfgUpdatePeriod 1.3.6.1.4.1.1872.2.1.3.9.1.10 integer read-write
Update period in seconds.
                               ripCurCfgState 1.3.6.1.4.1.1872.2.1.3.9.1.11 integer read-only
RIP global state. Enumeration: 'on': 2, 'other': 1, 'off': 3.
                               ripNewCfgState 1.3.6.1.4.1.1872.2.1.3.9.1.12 integer read-write
Globally turn RIP on or off. Enumeration: 'on': 2, 'other': 1, 'off': 3.
                               ripCurCfgPoisonReverse 1.3.6.1.4.1.1872.2.1.3.9.1.13 integer read-only
RIP poison reverse. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                               ripNewCfgPoisonReverse 1.3.6.1.4.1.1872.2.1.3.9.1.14 integer read-write
RIP poison reverse. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                           ipFwdCurCfgPortTable 1.3.6.1.4.1.1872.2.1.3.9.2 no-access
The table of ports and their forwarding states
                               ipFwdCurCfgPortEntry 1.3.6.1.4.1.1872.2.1.3.9.2.1 no-access
A row in the ipFwdCurCfgPortTable
                                   ipFwdCurCfgPortIndex 1.3.6.1.4.1.1872.2.1.3.9.2.1.1 integer read-only
The port number for which the forwarding state information pertains.
                                   ipFwdCurCfgPortState 1.3.6.1.4.1.1872.2.1.3.9.2.1.2 integer read-only
The forwarding state of the port. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                           ipFwdNewCfgPortTable 1.3.6.1.4.1.1872.2.1.3.9.3 no-access
The table of ports and their forwarding states
                               ipFwdNewCfgPortEntry 1.3.6.1.4.1.1872.2.1.3.9.3.1 no-access
A row in the ipFwdNewCfgPortTable
                                   ipFwdNewCfgPortIndex 1.3.6.1.4.1.1872.2.1.3.9.3.1.1 integer read-only
The port number for which the forwarding state information pertains.
                                   ipFwdNewCfgPortState 1.3.6.1.4.1.1872.2.1.3.9.3.1.2 integer read-write
The forwarding state of the port. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                           ipFwdCurCfgLocalSubnet 1.3.6.1.4.1.1872.2.1.3.9.4 ipaddress read-only
The current local IP subnet.
                           ipFwdNewCfgLocalSubnet 1.3.6.1.4.1.1872.2.1.3.9.5 ipaddress read-write
The new local IP subnet.
                           ipFwdCurCfgLocalMask 1.3.6.1.4.1.1872.2.1.3.9.6 ipaddress read-only
The current local IP subnet mask.
                           ipFwdNewCfgLocalMask 1.3.6.1.4.1.1872.2.1.3.9.7 ipaddress read-write
The new local IP subnet mask.
                           ipFwdCurCfgState 1.3.6.1.4.1.1872.2.1.3.9.8 integer read-only
IP forwarding global state. Enumeration: 'on': 2, 'other': 1, 'off': 3.
                           ipFwdNewCfgState 1.3.6.1.4.1.1872.2.1.3.9.9 integer read-write
IP forwarding global state. Enumeration: 'on': 2, 'other': 1, 'off': 3.
                           ipFwdCurCfgDirectedBcast 1.3.6.1.4.1.1872.2.1.3.9.10 integer read-only
Enable or disable forwarding directed broadcasts. Enumeration: 'disabled': 3, 'enabled': 2.
                           ipFwdNewCfgDirectedBcast 1.3.6.1.4.1.1872.2.1.3.9.11 integer read-write
Enable or disable forwarding directed broadcasts. Enumeration: 'disabled': 3, 'enabled': 2.
                       arpCurCfgReARPPeriod 1.3.6.1.4.1.1872.2.1.3.10 integer read-only
Re-ARP Period in seconds.
                       arpNewCfgReARPPeriod 1.3.6.1.4.1.1872.2.1.3.11 integer read-write
Re-ARP Period in seconds.
                       ipCurCfgGwMetric 1.3.6.1.4.1.1872.2.1.3.12 integer read-only
The default gateway metric. Enumeration: 'strict': 1, 'roundrobin': 2.
                       ipNewCfgGwMetric 1.3.6.1.4.1.1872.2.1.3.13 integer read-write
The default gateway metric. Enumeration: 'strict': 1, 'roundrobin': 2.
                   vlans 1.3.6.1.4.1.1872.2.1.4
                       vlanMaxEnt 1.3.6.1.4.1.1872.2.1.4.1 integer read-only
The maximum number of rows in the VLAN configuration table.
                       vlanCurCfgTable 1.3.6.1.4.1.1872.2.1.4.2 no-access
The table of VLAN configuration.
                           vlanCurCfgTableEntry 1.3.6.1.4.1.1872.2.1.4.2.1 no-access
A row in the VLAN configuration table.
                               vlanCurCfgVlanId 1.3.6.1.4.1.1872.2.1.4.2.1.1 integer read-only
The VLAN identifier.
                               vlanCurCfgVlanName 1.3.6.1.4.1.1872.2.1.4.2.1.2 displaystring read-only
The VLAN name.
                               vlanCurCfgPorts 1.3.6.1.4.1.1872.2.1.4.2.1.3 octet string read-only
The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN
                               vlanCurCfgState 1.3.6.1.4.1.1872.2.1.4.2.1.4 integer read-only
Enable or disable a VLAN Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                               vlanCurCfgJumbo 1.3.6.1.4.1.1872.2.1.4.2.1.5 integer read-only
Enable or Disable the Jumbo frame support for the VLAN Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                               vlanCurCfgBwmContract 1.3.6.1.4.1.1872.2.1.4.2.1.6 integer read-only
Default contract number the VLAN
                       vlanNewCfgTable 1.3.6.1.4.1.1872.2.1.4.3 no-access
The table of VLAN configuration.
                           vlanNewCfgTableEntry 1.3.6.1.4.1.1872.2.1.4.3.1 no-access
A row in the VLAN configuration table.
                               vlanNewCfgVlanId 1.3.6.1.4.1.1872.2.1.4.3.1.1 integer read-only
The VLAN identifier.
                               vlanNewCfgVlanName 1.3.6.1.4.1.1872.2.1.4.3.1.2 displaystring read-write
The VLAN name.
                               vlanNewCfgPorts 1.3.6.1.4.1.1872.2.1.4.3.1.3 octet string read-only
The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN
                               vlanNewCfgState 1.3.6.1.4.1.1872.2.1.4.3.1.4 integer read-write
Enable or disable a VLAN Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                               vlanNewCfgJumbo 1.3.6.1.4.1.1872.2.1.4.3.1.5 integer read-write
Enable or Disable the Jumbo frame support for the VLAN Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                               vlanNewCfgAddPort 1.3.6.1.4.1.1872.2.1.4.3.1.6 integer read-write
The port to be added to the specified VLAN. A '0' value is returned when read.
                               vlanNewCfgRemovePort 1.3.6.1.4.1.1872.2.1.4.3.1.7 integer read-write
The port to be removed from the specified VLAN. A '0' value is returned when read.
                               vlanNewCfgDelete 1.3.6.1.4.1.1872.2.1.4.3.1.8 integer read-write
This is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN Enumeration: 'other': 1, 'delete': 2.
                               vlanNewCfgBwmContract 1.3.6.1.4.1.1872.2.1.4.3.1.9 integer read-write
Default contract number for the VLAN.
                   serverloadbalance 1.3.6.1.4.1.1872.2.1.5
                       slbRealServerMaxSize 1.3.6.1.4.1.1872.2.1.5.1 integer read-only
The maximum number of entries in SLB RealServerTable.
                       slbCurCfgRealServerTable 1.3.6.1.4.1.1872.2.1.5.2 no-access
The table of Real Server configuration in the current_config.
                           slbCurCfgRealServerEntry 1.3.6.1.4.1.1872.2.1.5.2.1 no-access
Information about a particular Real Server configuration.
                               slbCurCfgRealServerIndex 1.3.6.1.4.1.1872.2.1.5.2.1.1 integer read-only
The real server number
                               slbCurCfgRealServerIpAddr 1.3.6.1.4.1.1872.2.1.5.2.1.2 ipaddress read-only
IP address of the real server identified by the instance of slbRealServerIndex.
                               slbCurCfgRealServerWeight 1.3.6.1.4.1.1872.2.1.5.2.1.3 integer read-only
The server weight.
                               slbCurCfgRealServerMaxConns 1.3.6.1.4.1.1872.2.1.5.2.1.4 integer read-only
The maximum number of connections that are allowed.
                               slbCurCfgRealServerTimeOut 1.3.6.1.4.1.1872.2.1.5.2.1.5 integer read-only
The maximum number of minutes an inactive connection remains open.
                               slbCurCfgRealServerBackUp 1.3.6.1.4.1.1872.2.1.5.2.1.6 integer read-only
The backup server number for this server. Enumeration: 'none': 0.
                               slbCurCfgRealServerPingInterval 1.3.6.1.4.1.1872.2.1.5.2.1.7 integer read-only
The interval between keep-alive (ping) attempts in number of seconds. Zero means disabling ping attempt.
                               slbCurCfgRealServerFailRetry 1.3.6.1.4.1.1872.2.1.5.2.1.8 integer read-only
The number of failed attempts to declare this server DOWN.
                               slbCurCfgRealServerSuccRetry 1.3.6.1.4.1.1872.2.1.5.2.1.9 integer read-only
The number of successful attempts to declare a server UP.
                               slbCurCfgRealServerState 1.3.6.1.4.1.1872.2.1.5.2.1.10 integer read-only
Enable or disable this server. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                               slbCurCfgRealServerType 1.3.6.1.4.1.1872.2.1.5.2.1.11 integer read-only
The server type. It participates in global server load balancing when it is configured as remote-server. Enumeration: 'local-server': 1, 'remote-server': 2.
                               slbCurCfgRealServerName 1.3.6.1.4.1.1872.2.1.5.2.1.12 displaystring read-only
The name of the real server.
                               slbCurCfgRealServerUrlBmap 1.3.6.1.4.1.1872.2.1.5.2.1.13 octet string read-only
The URL Pathes selected for URL load balancing for by the real server. The selected URL Pathes are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ URL Path 9 || || || ||___ URL Path 8 || |____ URL Path 7 || . . . ||_________ URL Path 2 |__________ URL Path 1 where x : 1 - The represented URL Path is selected 0 - The represented URL Path is not selected
                               slbCurCfgRealServerCookie 1.3.6.1.4.1.1872.2.1.5.2.1.14 integer read-only
The real server that will handle client requests that don't contain an URL cookie if Cookie loadbalance is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbCurCfgRealServerExcludeStr 1.3.6.1.4.1.1872.2.1.5.2.1.15 integer read-only
The real server will handle requests that don't match the loadbalance string if it is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbCurCfgRealServerSubmac 1.3.6.1.4.1.1872.2.1.5.2.1.16 integer read-only
The real server config to enable/disable MAC SA substitution for L4 traffic. If disabled (the default) we will NOT substitute the MAC SA of client-to-server frames. If enabled, we will substitute the MAC SA. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbNewCfgRealServerTable 1.3.6.1.4.1.1872.2.1.5.3 no-access
The table of Real Server configuration in the new_config.
                           slbNewCfgRealServerEntry 1.3.6.1.4.1.1872.2.1.5.3.1 no-access
Information about a particular Real Server configuration.
                               slbNewCfgRealServerIndex 1.3.6.1.4.1.1872.2.1.5.3.1.1 integer read-only
The real server number
                               slbNewCfgRealServerIpAddr 1.3.6.1.4.1.1872.2.1.5.3.1.2 ipaddress read-write
IP address of the real server identified by the instance of slbRealServerIndex.
                               slbNewCfgRealServerWeight 1.3.6.1.4.1.1872.2.1.5.3.1.3 integer read-write
The server weight.
                               slbNewCfgRealServerMaxConns 1.3.6.1.4.1.1872.2.1.5.3.1.4 integer read-write
The maximum number of connections that are allowed.
                               slbNewCfgRealServerTimeOut 1.3.6.1.4.1.1872.2.1.5.3.1.5 integer read-write
The maximum number of minutes an inactive connection remains open.
                               slbNewCfgRealServerBackUp 1.3.6.1.4.1.1872.2.1.5.3.1.6 integer read-write
The backup server number for this server. Enumeration: 'none': 0.
                               slbNewCfgRealServerPingInterval 1.3.6.1.4.1.1872.2.1.5.3.1.7 integer read-write
The interval between keep-alive (ping) attempts in number of seconds. Zero means disabling ping attempt.
                               slbNewCfgRealServerFailRetry 1.3.6.1.4.1.1872.2.1.5.3.1.8 integer read-write
The number of failed attempts to declare this server DOWN.
                               slbNewCfgRealServerSuccRetry 1.3.6.1.4.1.1872.2.1.5.3.1.9 integer read-write
The number of successful attempts to declare a server UP.
                               slbNewCfgRealServerState 1.3.6.1.4.1.1872.2.1.5.3.1.10 integer read-write
Enable or disable this server. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                               slbNewCfgRealServerDelete 1.3.6.1.4.1.1872.2.1.5.3.1.11 integer read-write
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                               slbNewCfgRealServerType 1.3.6.1.4.1.1872.2.1.5.3.1.12 integer read-write
The server type. It participates in global server load balancing when it is configured as remote-server. Enumeration: 'local-server': 1, 'remote-server': 2.
                               slbNewCfgRealServerName 1.3.6.1.4.1.1872.2.1.5.3.1.13 displaystring read-write
The name of the real server.
                               slbNewCfgRealServerUrlBmap 1.3.6.1.4.1.1872.2.1.5.3.1.14 octet string read-only
The URL Pathes selected for URL load balancing for by the real server. The selected URL Pathes are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ URL Path 9 || || || ||___ URL Path 8 || |____ URL Path 7 || . . . ||_________ URL Path 2 |__________ URL Path 1 where x : 1 - The represented URL Path is selected 0 - The represented URL Path is not selected
                               slbNewCfgRealServerAddUrl 1.3.6.1.4.1.1872.2.1.5.3.1.15 integer read-write
The URL Path (slbCurCfgUrlLbPathIndex) to be added to the real server. A zero is returned when read.
                               slbNewCfgRealServerRemUrl 1.3.6.1.4.1.1872.2.1.5.3.1.16 integer read-write
The URL Path (slbCurCfgUrlLbPathIndex) to be removed from the real server. A zero is returned when read.
                               slbNewCfgRealServerCookie 1.3.6.1.4.1.1872.2.1.5.3.1.17 integer read-write
Enable or disable real server to handle client requests that don't contain a cookie if cookie loadbalance is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewCfgRealServerExcludeStr 1.3.6.1.4.1.1872.2.1.5.3.1.18 integer read-write
Enable or disable exclusionary matching string on real server. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewCfgRealServerSubmac 1.3.6.1.4.1.1872.2.1.5.3.1.19 integer read-write
The real server config to enable/disable MAC SA substitution for L4 traffic. If disabled (the default) we will NOT substitute the MAC SA of client-to-server frames. If enabled, we will substitute the MAC SA. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbVirtServerTableMaxSize 1.3.6.1.4.1.1872.2.1.5.4 integer read-only
The maximum number of entries in SLB VirtServerTable.
                       slbCurCfgVirtServerTable 1.3.6.1.4.1.1872.2.1.5.5 no-access
The table of virtual Servers.
                           slbCurCfgVirtualServerEntry 1.3.6.1.4.1.1872.2.1.5.5.1 no-access
A row in the virtual server table.
                               slbCurCfgVirtServerIndex 1.3.6.1.4.1.1872.2.1.5.5.1.1 integer read-only
Virtual Server Number
                               slbCurCfgVirtServerIpAddress 1.3.6.1.4.1.1872.2.1.5.5.1.2 ipaddress read-only
IP address of the virtual server.
                               slbCurCfgVirtServerLayer3Only 1.3.6.1.4.1.1872.2.1.5.5.1.3 integer read-only
Enable or disable layer3 only balancing. Enumeration: 'disabled': 2, 'layer3Only': 1.
                               slbCurCfgVirtServerState 1.3.6.1.4.1.1872.2.1.5.5.1.4 integer read-only
Enable or disable the virtual server. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                               slbCurCfgVirtServerDname 1.3.6.1.4.1.1872.2.1.5.5.1.5 displaystring read-only
The domain name of the virtual server.
                               slbCurCfgVirtServerCname 1.3.6.1.4.1.1872.2.1.5.5.1.6 displaystring read-only
The cookie name of the virtual server used for cookie load balance.
                               slbCurCfgVirtServerCoffset 1.3.6.1.4.1.1872.2.1.5.5.1.7 integer read-only
The starting byte offset of the cookie value.
                               slbCurCfgVirtServerClength 1.3.6.1.4.1.1872.2.1.5.5.1.8 integer read-only
The number of bytes to extract from the cookie value.
                               slbCurCfgVirtServerUriCookie 1.3.6.1.4.1.1872.2.1.5.5.1.9 integer read-only
Enable or disable cookie search in URI Enumeration: 'disabled': 2, 'enabled': 1.
                               slbCurCfgVirtServerFtpParsing 1.3.6.1.4.1.1872.2.1.5.5.1.10 integer read-only
Enable or Disable the ftp parsing for the virtual server. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbCurCfgVirtServerUrlHashLen 1.3.6.1.4.1.1872.2.1.5.5.1.11 integer read-only
The number of bytes used to hash onto server, A zero means URL hashing disabled.
                               slbCurCfgVirtServerHttpHdrName 1.3.6.1.4.1.1872.2.1.5.5.1.12 displaystring read-only
The HTTP header name of the virtual server.
                               slbCurCfgVirtServerBwmContract 1.3.6.1.4.1.1872.2.1.5.5.1.13 integer read-only
The default BW contract of virtual server.
                       slbNewCfgVirtServerTable 1.3.6.1.4.1.1872.2.1.5.6 no-access
The table of virtual Servers.
                           slbNewCfgVirtualServerEntry 1.3.6.1.4.1.1872.2.1.5.6.1 no-access
A row in the virtual server table.
                               slbNewCfgVirtServerIndex 1.3.6.1.4.1.1872.2.1.5.6.1.1 integer read-only
Virtual Server Number
                               slbNewCfgVirtServerIpAddress 1.3.6.1.4.1.1872.2.1.5.6.1.2 ipaddress read-write
IP address of the virtual server.
                               slbNewCfgVirtServerLayer3Only 1.3.6.1.4.1.1872.2.1.5.6.1.3 integer read-write
Enable or disable layer3 only balancing. Enumeration: 'disabled': 2, 'layer3Only': 1.
                               slbNewCfgVirtServerState 1.3.6.1.4.1.1872.2.1.5.6.1.4 integer read-write
Enable or disable the virtual server. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                               slbNewCfgVirtServerDelete 1.3.6.1.4.1.1872.2.1.5.6.1.5 integer read-write
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                               slbNewCfgVirtServerDname 1.3.6.1.4.1.1872.2.1.5.6.1.6 displaystring read-write
The domain name of the virtual server.
                               slbNewCfgVirtServerCname 1.3.6.1.4.1.1872.2.1.5.6.1.7 displaystring read-write
The cookie name of the virtual server used for cookie load balance.
                               slbNewCfgVirtServerCoffset 1.3.6.1.4.1.1872.2.1.5.6.1.8 integer read-write
The starting byte offset of the cookie value.
                               slbNewCfgVirtServerClength 1.3.6.1.4.1.1872.2.1.5.6.1.9 integer read-write
The number of bytes to extract from the cookie value.
                               slbNewCfgVirtServerUriCookie 1.3.6.1.4.1.1872.2.1.5.6.1.10 integer read-write
Enable or disable cookie search in URI Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewCfgVirtServerFtpParsing 1.3.6.1.4.1.1872.2.1.5.6.1.11 integer read-write
Enable or Disable the ftp parsing for the virtual server. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewCfgVirtServerUrlHashLen 1.3.6.1.4.1.1872.2.1.5.6.1.12 integer read-write
The number of bytes used to hash onto server, A zero means URL hashing disabled.
                               slbNewCfgVirtServerHttpHdrName 1.3.6.1.4.1.1872.2.1.5.6.1.13 displaystring read-write
The HTTP header name of the virtual server.
                               slbNewCfgVirtServerBwmContract 1.3.6.1.4.1.1872.2.1.5.6.1.14 integer read-write
The default BW contract number of the virtual server.
                       slbCurCfgVirtServicesTable 1.3.6.1.4.1.1872.2.1.5.7 no-access
The table of virtual Services.
                           slbCurCfgVirtServicesEntry 1.3.6.1.4.1.1872.2.1.5.7.1 no-access
A row in the virtual services table.
                               slbCurCfgVirtServIndex 1.3.6.1.4.1.1872.2.1.5.7.1.1 integer read-only
The number of the virtual server.
                               slbCurCfgVirtServiceIndex 1.3.6.1.4.1.1872.2.1.5.7.1.2 integer read-only
The service index. This has no external meaning
                               slbCurCfgVirtServiceVirtPort 1.3.6.1.4.1.1872.2.1.5.7.1.3 integer read-only
The layer4 virtual port number of the service.
                               slbCurCfgVirtServiceRealGroup 1.3.6.1.4.1.1872.2.1.5.7.1.4 integer read-only
The real server group number for this service.
                               slbCurCfgVirtServiceRealPort 1.3.6.1.4.1.1872.2.1.5.7.1.5 integer read-only
The layer4 real port number of the service.
                               slbCurCfgVirtServiceUDPBalance 1.3.6.1.4.1.1872.2.1.5.7.1.6 integer read-only
Enable, disable or stateless the UDP balancing for the virtual port. Enumeration: 'disabled': 3, 'stateless': 4, 'other': 1, 'enabled': 2.
                               slbCurCfgVirtServicePBind 1.3.6.1.4.1.1872.2.1.5.7.1.7 integer read-only
Enable or disable persistent bindings for the virtual port. Enumeration: 'disabled': 3, 'cookie': 5, 'other': 1, 'enabled': 2, 'sessid': 4.
                               slbCurCfgVirtServiceHname 1.3.6.1.4.1.1872.2.1.5.7.1.8 displaystring read-only
The host name of the virtual service.
                               slbCurCfgVirtServiceHttpSlb 1.3.6.1.4.1.1872.2.1.5.7.1.9 integer read-only
Select HTTP server loadbalancing for the virtual port. Enumeration: 'urlslb': 2, 'disabled': 1, 'host': 5, 'cookie': 4, 'others': 7, 'urlhash': 3, 'browser': 6.
                               slbCurCfgVirtServiceBwmContract 1.3.6.1.4.1.1872.2.1.5.7.1.10 integer read-only
The BWM contract number for this service.
                               slbCurCfgVirtServiceDirServerRtn 1.3.6.1.4.1.1872.2.1.5.7.1.11 integer read-only
Enable or disable direct server return feature. To translate only MAC addresses in performing server load balancing when enabled. This allow servers to return directly to client since IP addresses have not been changed. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbNewCfgVirtServicesTable 1.3.6.1.4.1.1872.2.1.5.8 no-access
The table of virtual Services.
                           slbNewCfgVirtServicesEntry 1.3.6.1.4.1.1872.2.1.5.8.1 no-access
A row in the virtual services table.
                               slbNewCfgVirtServIndex 1.3.6.1.4.1.1872.2.1.5.8.1.1 integer read-only
The number of the virtual server.
                               slbNewCfgVirtServiceIndex 1.3.6.1.4.1.1872.2.1.5.8.1.2 integer read-only
The service index. This has no external meaning
                               slbNewCfgVirtServiceVirtPort 1.3.6.1.4.1.1872.2.1.5.8.1.3 integer read-write
The layer4 virtual port number of the service.
                               slbNewCfgVirtServiceRealGroup 1.3.6.1.4.1.1872.2.1.5.8.1.4 integer read-write
The real server group number for this service.
                               slbNewCfgVirtServiceRealPort 1.3.6.1.4.1.1872.2.1.5.8.1.5 integer read-write
The layer4 real port number of the service.
                               slbNewCfgVirtServiceUDPBalance 1.3.6.1.4.1.1872.2.1.5.8.1.6 integer read-write
Enable, disable or stateless the UDP balancing for the virtual port. Enumeration: 'disabled': 3, 'stateless': 4, 'other': 1, 'enabled': 2.
                               slbNewCfgVirtServicePBind 1.3.6.1.4.1.1872.2.1.5.8.1.7 integer read-write
Enable or disable persistent bindings for the virtual port. Enumeration: 'disabled': 3, 'cookie': 5, 'other': 1, 'enabled': 2, 'sessid': 4.
                               slbNewCfgVirtServiceHname 1.3.6.1.4.1.1872.2.1.5.8.1.8 displaystring read-write
The host name of the virtual service.
                               slbNewCfgVirtServiceHttpSlb 1.3.6.1.4.1.1872.2.1.5.8.1.9 integer read-write
Select HTTP server loadbalancing for the virtual port. Enumeration: 'urlslb': 2, 'disabled': 1, 'host': 5, 'cookie': 4, 'others': 7, 'urlhash': 3, 'browser': 6.
                               slbNewCfgVirtServiceBwmContract 1.3.6.1.4.1.1872.2.1.5.8.1.10 integer read-write
The BWM contract number for this service.
                               slbNewCfgVirtServiceDirServerRtn 1.3.6.1.4.1.1872.2.1.5.8.1.11 integer read-write
Enable or disable direct server return feature. To translate only MAC addresses in performing server load balancing when enabled. This allow servers to return directly to client since IP addresses have not been changed. Enumeration: 'disabled': 2, 'enabled': 1.
                               slbNewCfgVirtServiceDelete 1.3.6.1.4.1.1872.2.1.5.8.1.12 integer read-write
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                       slbGroupTableMaxSize 1.3.6.1.4.1.1872.2.1.5.9 integer read-only
The maximum number of entries in slbCurCfgGroupTable.
                       slbCurCfgGroupTable 1.3.6.1.4.1.1872.2.1.5.10 no-access
The table of groups
                             slbCurCfgGroupEntry 1.3.6.1.4.1.1872.2.1.5.10.1 no-access
A row in the slbCurCfgGroupTable
                                 slbCurCfgGroupIndex 1.3.6.1.4.1.1872.2.1.5.10.1.1 integer read-only
The group number for which the information pertains.
                                 slbCurCfgGroupRealServers 1.3.6.1.4.1.1872.2.1.5.10.1.2 octet string read-only
The Real servers in the group. The servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented server belongs to the group 0 - The represented server does not belong to the group
                                 slbCurCfgGroupMetric 1.3.6.1.4.1.1872.2.1.5.10.1.3 integer read-only
The metric used to select next server in group. Enumeration: 'minMisses': 3, 'roundRobin': 1, 'hash': 4, 'leastConnections': 2.
                                 slbCurCfgGroupBackupServer 1.3.6.1.4.1.1872.2.1.5.10.1.4 integer read-only
The backup real server for this group. Enumeration: 'none': 0.
                                 slbCurCfgGroupHealthCheckUrl 1.3.6.1.4.1.1872.2.1.5.10.1.5 displaystring read-only
The URL used to verify HTTP content availability for the real servers of this group.
                                 slbCurCfgGroupHealthCheckLayer 1.3.6.1.4.1.1872.2.1.5.10.1.6 integer read-only
The OSI layer at which servers are health checked. Enumeration: 'ftp': 8, 'script4': 15, 'http': 3, 'script2': 13, 'script8': 19, 'smtp': 5, 'tcp': 2, 'pop3': 6, 'script5': 16, 'script6': 17, 'script7': 18, 'radius': 10, 'script1': 12, 'dns': 4, 'script3': 14, 'sslh': 11, 'icmp': 1, 'nntp': 7, 'imap': 9.
                                 slbCurCfgGroupName 1.3.6.1.4.1.1872.2.1.5.10.1.7 displaystring read-only
The name of the real server group.
                                 slbCurCfgGroupRealThreshold 1.3.6.1.4.1.1872.2.1.5.10.1.8 integer read-only
The server failure syslog threshold of the real server group.
                                 slbCurCfgGroupBackupGroup 1.3.6.1.4.1.1872.2.1.5.10.1.9 integer read-only
The backup real server group for this group. Enumeration: 'none': 0.
                       slbNewCfgGroupTable 1.3.6.1.4.1.1872.2.1.5.11 no-access
The table of groups
                             slbNewCfgGroupEntry 1.3.6.1.4.1.1872.2.1.5.11.1 no-access
A row in the slbNewCfgGroupTable
                                 slbNewCfgGroupIndex 1.3.6.1.4.1.1872.2.1.5.11.1.1 integer read-only
The group number for which the information pertains.
                                 slbNewCfgGroupRealServers 1.3.6.1.4.1.1872.2.1.5.11.1.2 octet string read-only
The Real servers in the group. The servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented server belongs to the group 0 - The represented server does not belong to the group
                                 slbNewCfgGroupAddServer 1.3.6.1.4.1.1872.2.1.5.11.1.3 integer read-write
The real server to be added to the group. When read, 0 is returned.
                                 slbNewCfgGroupRemoveServer 1.3.6.1.4.1.1872.2.1.5.11.1.4 integer read-write
The real server to be removed from the group. When read, 0 is returned.
                                 slbNewCfgGroupMetric 1.3.6.1.4.1.1872.2.1.5.11.1.5 integer read-write
The metric used to select next server in group. Enumeration: 'minMisses': 3, 'roundRobin': 1, 'hash': 4, 'leastConnections': 2.
                                 slbNewCfgGroupBackupServer 1.3.6.1.4.1.1872.2.1.5.11.1.6 integer read-write
The backup real server for this group. Enumeration: 'none': 0.
                                 slbNewCfgGroupDelete 1.3.6.1.4.1.1872.2.1.5.11.1.7 integer read-write
By setting the value to delete(2), the entire group is deleted. Enumeration: 'other': 1, 'delete': 2.
                                 slbNewCfgGroupHealthCheckUrl 1.3.6.1.4.1.1872.2.1.5.11.1.8 displaystring read-write
The URL for health check among the real servers of this group.
                                 slbNewCfgGroupHealthCheckLayer 1.3.6.1.4.1.1872.2.1.5.11.1.9 integer read-write
The OSI layer at which servers are health checked. Enumeration: 'ftp': 8, 'script4': 15, 'http': 3, 'script2': 13, 'script8': 19, 'smtp': 5, 'tcp': 2, 'pop3': 6, 'script5': 16, 'script6': 17, 'script7': 18, 'radius': 10, 'script1': 12, 'dns': 4, 'script3': 14, 'sslh': 11, 'icmp': 1, 'nntp': 7, 'imap': 9.
                                 slbNewCfgGroupName 1.3.6.1.4.1.1872.2.1.5.11.1.10 displaystring read-write
The name of the real server group.
                                 slbNewCfgGroupRealThreshold 1.3.6.1.4.1.1872.2.1.5.11.1.11 integer read-write
The server failure syslog threshold of the real server group.
                                 slbNewCfgGroupBackupGroup 1.3.6.1.4.1.1872.2.1.5.11.1.12 integer read-write
The backup real server group for this group. Enumeration: 'none': 0.
                       slbCurCfgPortTable 1.3.6.1.4.1.1872.2.1.5.12 no-access
The table of ports and their SLB states
                             slbCurCfgPortEntry 1.3.6.1.4.1.1872.2.1.5.12.1 no-access
A row in the slbPortTable
                                 slbCurCfgPortIndex 1.3.6.1.4.1.1872.2.1.5.12.1.1 integer read-only
The port number for which the SLB information pertains.
                                 slbCurCfgPortProxyIpAddr 1.3.6.1.4.1.1872.2.1.5.12.1.2 ipaddress read-only
The proxy IP address of the interface.
                                 slbCurCfgPortSlbState 1.3.6.1.4.1.1872.2.1.5.12.1.3 integer read-only
The SLB state of the port. none(1) - not SLB port client(2) - SLB client port server(3) - SLB server port client-server(4) - SLB client and server port FailOver(5) - SLB fail over port failOver-stanby(6) - SLB fail port operating as standby (a read-only state) Enumeration: 'none': 1, 'client-server': 4, 'failOver': 5, 'failOver-stanby': 6, 'client': 2, 'server': 3.
                                 slbCurCfgPortSlbHotStandby 1.3.6.1.4.1.1872.2.1.5.12.1.4 integer read-only
Enable or disable hot standby processing on the switch port. Enumeration: 'disabled': 2, 'enabled': 1.
                                 slbCurCfgPortSlbInterSwitch 1.3.6.1.4.1.1872.2.1.5.12.1.5 integer read-only
Enable or disable inter-switch processing on the switch port. Enumeration: 'disabled': 2, 'enabled': 1.
                                 slbCurCfgPortSlbPipState 1.3.6.1.4.1.1872.2.1.5.12.1.6 integer read-only
Enable or disable use of proxy IP address on the switch port. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbNewCfgPortTable 1.3.6.1.4.1.1872.2.1.5.13 no-access
The table of ports and their SLB states
                             slbNewCfgPortEntry 1.3.6.1.4.1.1872.2.1.5.13.1 no-access
A row in the slbPortTable
                                 slbNewCfgPortIndex 1.3.6.1.4.1.1872.2.1.5.13.1.1 integer read-only
The port number for which the SLB information pertains.
                                 slbNewCfgPortProxyIpAddr 1.3.6.1.4.1.1872.2.1.5.13.1.2 ipaddress read-write
The proxy IP address of the interface.
                                 slbNewCfgPortSlbState 1.3.6.1.4.1.1872.2.1.5.13.1.3 integer read-write
The SLB state of the port. none(1) - not SLB port client(2) - SLB client port server(3) - SLB server port client-server(4) - SLB client and server port FailOver(5) - SLB fail over port failOver-stanby(6) - SLB fail port operating as standby (a read-only state) Enumeration: 'none': 1, 'client-server': 4, 'failOver': 5, 'failOver-stanby': 6, 'client': 2, 'server': 3.
                                 slbNewCfgPortSlbHotStandby 1.3.6.1.4.1.1872.2.1.5.13.1.4 integer read-write
Enable or disable hot standby processing on the switch port. Enumeration: 'disabled': 2, 'enabled': 1.
                                 slbNewCfgPortSlbInterSwitch 1.3.6.1.4.1.1872.2.1.5.13.1.5 integer read-write
Enable or disable inter-switch processing on the switch port. Enumeration: 'disabled': 2, 'enabled': 1.
                                 slbNewCfgPortSlbPipState 1.3.6.1.4.1.1872.2.1.5.13.1.6 integer read-write
Enable or disable use of proxy IP address on the switch port. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbCurCfgImask 1.3.6.1.4.1.1872.2.1.5.14 ipaddress read-only
The virtual and real IP address mask - corresponding to the imask command of the slb configuration menu.
                       slbNewCfgImask 1.3.6.1.4.1.1872.2.1.5.15 ipaddress read-write
The virtual and real IP address mask - corresponding to the imask command of the slb configuration menu.
                       slbfailover 1.3.6.1.4.1.1872.2.1.5.16
                             slbCurCfgFailOverTable 1.3.6.1.4.1.1872.2.1.5.16.1 no-access
The table of current switch fail-over configuration.
                                 slbCurCfgFailOverTblEntry 1.3.6.1.4.1.1872.2.1.5.16.1.1 no-access
A row in the current switch fail-over configuration table.
                                     slbCurCfgFailOverIndex 1.3.6.1.4.1.1872.2.1.5.16.1.1.1 integer read-only
The index of current switch fail-over configuration table.
                                     slbCurCfgFailOverPrimaryIp 1.3.6.1.4.1.1872.2.1.5.16.1.1.2 ipaddress read-only
The IP address of the Primary switch.
                                     slbCurCfgFailOverSecondaryIp 1.3.6.1.4.1.1872.2.1.5.16.1.1.3 ipaddress read-only
The IP address of the Secondary switch.
                                     slbCurCfgFailOverSilenceInterval 1.3.6.1.4.1.1872.2.1.5.16.1.1.4 integer read-only
Number of seconds before a silent peer is assumed down.
                                     slbCurCfgFailOverState 1.3.6.1.4.1.1872.2.1.5.16.1.1.5 integer read-only
Enable or disable slb switch failover feature. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                                     slbCurCfgFailOverRouteSupply 1.3.6.1.4.1.1872.2.1.5.16.1.1.6 integer read-only
Enable or disable to supply network routes update when switch is a standby switch. Enumeration: 'disabled': 2, 'enabled': 1.
                             slbNewCfgFailOverTable 1.3.6.1.4.1.1872.2.1.5.16.2 no-access
The table of new switch fail-over configuration.
                                 slbNewCfgFailOverTblEntry 1.3.6.1.4.1.1872.2.1.5.16.2.1 no-access
A row in the new switch fail-over configuration table.
                                     slbNewCfgFailOverIndex 1.3.6.1.4.1.1872.2.1.5.16.2.1.1 integer read-only
The index of new switch fail-over configuration table.
                                     slbNewCfgFailOverPrimaryIp 1.3.6.1.4.1.1872.2.1.5.16.2.1.2 ipaddress read-write
The IP address of the Primary switch.
                                     slbNewCfgFailOverSecondaryIp 1.3.6.1.4.1.1872.2.1.5.16.2.1.3 ipaddress read-write
The IP address of the Secondary switch.
                                     slbNewCfgFailOverSilenceInterval 1.3.6.1.4.1.1872.2.1.5.16.2.1.4 integer read-write
Number of seconds before a silent peer is assumed down.
                                     slbNewCfgFailOverState 1.3.6.1.4.1.1872.2.1.5.16.2.1.5 integer read-write
Enable or disable slb switch failover feature. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                                     slbNewCfgFailOverRouteSupply 1.3.6.1.4.1.1872.2.1.5.16.2.1.6 integer read-only
Enable or disable to supply network routes update when switch is a standby switch. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbCurCfgGlobalControl 1.3.6.1.4.1.1872.2.1.5.17 integer read-only
The global state of Server Load Balancing. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                       slbNewCfgGlobalControl 1.3.6.1.4.1.1872.2.1.5.18 integer read-write
The global state of Server Load Balancing. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                       slbCurCfgMnet 1.3.6.1.4.1.1872.2.1.5.19 ipaddress read-only
The management network - corresponding to the mnet command of the slb configuration menu.
                       slbNewCfgMnet 1.3.6.1.4.1.1872.2.1.5.20 ipaddress read-write
The management network - corresponding to the mnet command of the slb configuration menu.
                       slbCurCfgMmask 1.3.6.1.4.1.1872.2.1.5.21 ipaddress read-only
The management subnet mask - corresponding to the mmask command of the slb configuration menu.
                       slbNewCfgMmask 1.3.6.1.4.1.1872.2.1.5.22 ipaddress read-write
The management subnet mask - corresponding to the mmask command of the slb configuration menu.
                       slbCurCfgRadiusAuthenString 1.3.6.1.4.1.1872.2.1.5.23 displaystring read-only
The RADIUS authentication string. The string is used for generating encrypted authentication string for RADIUS health check.
                       slbNewCfgRadiusAuthenString 1.3.6.1.4.1.1872.2.1.5.24 displaystring read-write
The RADIUS authentication string. The string is used for generating encrypted authentication string for RADIUS health check.
                       slbCurCfgDirectMode 1.3.6.1.4.1.1872.2.1.5.25 integer read-only
Enable or disable direct access mode. It allows direct access to real servers and any combination of virtual and real servers when set to enabled(1). Enumeration: 'disabled': 2, 'enabled': 1.
                       slbNewCfgDirectMode 1.3.6.1.4.1.1872.2.1.5.26 integer read-write
Enable or disable direct access mode. It allows direct access to real servers and any combination of virtual and real servers when set to enabled(1). Enumeration: 'disabled': 2, 'enabled': 1.
                       slbUrl 1.3.6.1.4.1.1872.2.1.5.27
                             slbUrlRedir 1.3.6.1.4.1.1872.2.1.5.27.1
                                 slbCurCfgUrlExpTable 1.3.6.1.4.1.1872.2.1.5.27.1.1 no-access
The table of URL expressions in the current_config.
                                     slbCurCfgUrlExpTableEntry 1.3.6.1.4.1.1872.2.1.5.27.1.1.1 no-access
Information about a expression for URL parsing.
                                         slbCurCfgUrlExpIndex 1.3.6.1.4.1.1872.2.1.5.27.1.1.1.1 integer read-only
The URL expressions table index.
                                         slbCurCfgUrlExpression 1.3.6.1.4.1.1872.2.1.5.27.1.1.1.2 displaystring read-only
The expressions for URL parsing.
                                 slbNewCfgUrlExpTable 1.3.6.1.4.1.1872.2.1.5.27.1.2 no-access
The table of URL expressions in the new_config.
                                     slbNewCfgUrlExpTableEntry 1.3.6.1.4.1.1872.2.1.5.27.1.2.1 no-access
Information about a expression for URL parsing.
                                         slbNewCfgUrlExpIndex 1.3.6.1.4.1.1872.2.1.5.27.1.2.1.1 integer read-only
The URL expressions table index.
                                         slbNewCfgUrlExpression 1.3.6.1.4.1.1872.2.1.5.27.1.2.1.2 displaystring read-write
The expressions for URL parsing.
                                         slbNewCfgUrlExpDelete 1.3.6.1.4.1.1872.2.1.5.27.1.2.1.3 integer read-write
Action object to delete an URL expression. When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                                 slbCurCfgUrlRedirNonGetOrigSrv 1.3.6.1.4.1.1872.2.1.5.27.1.3 integer read-only
This is for controlling if the switch should redirect packet to the origin server when HTTP non-GETs are detected. enabled(1) - Allow redirect traffic to the origin server disabled(2)- redirect to a group of servers Enumeration: 'disabled': 2, 'enabled': 1.
                                 slbNewCfgUrlRedirNonGetOrigSrv 1.3.6.1.4.1.1872.2.1.5.27.1.4 integer read-write
This is for controlling if the switch should redirect packet to the origin server when HTTP non-GETs are detected. enabled(1) - Allow redirect traffic to the origin server disabled(2)- redirect to a group of servers Enumeration: 'disabled': 2, 'enabled': 1.
                                 slbCurCfgUrlRedirCookieOrigSrv 1.3.6.1.4.1.1872.2.1.5.27.1.5 integer read-only
This is for controlling if the switch should redirect packet to the origin server when user cookies are detected. enabled(1) - Allow redirect traffic to the origin server disabled(2)- redirect to a group of servers Enumeration: 'disabled': 2, 'enabled': 1.
                                 slbNewCfgUrlRedirCookieOrigSrv 1.3.6.1.4.1.1872.2.1.5.27.1.6 integer read-write
This is for controlling if the switch should redirect packet to the origin server when user cookies are detected. enabled(1) - Allow redirect traffic to the origin server disabled(2)- redirect to a group of servers Enumeration: 'disabled': 2, 'enabled': 1.
                                 slbCurCfgUrlRedirNoCacheOrigSrv 1.3.6.1.4.1.1872.2.1.5.27.1.7 integer read-only
This is for controlling if the switch should redirect packet to the origin server when no-cache header are detected. enabled(1) - Allow redirect traffic to the origin server disabled(2)- redirect to a group of servers Enumeration: 'disabled': 2, 'enabled': 1.
                                 slbNewCfgUrlRedirNoCacheOrigSrv 1.3.6.1.4.1.1872.2.1.5.27.1.8 integer read-write
This is for controlling if the switch should redirect packet to the origin server when no-cache header are detected. enabled(1) - Allow redirect traffic to the origin server disabled(2)- redirect to a group of servers Enumeration: 'disabled': 2, 'enabled': 1.
                                 slbCurCfgUrlRedirUriHashLength 1.3.6.1.4.1.1872.2.1.5.27.1.9 integer read-only
Specify the number of bytes in the URI will be used to hash onto server
                                 slbNewCfgUrlRedirUriHashLength 1.3.6.1.4.1.1872.2.1.5.27.1.10 integer read-write
Specify the number of bytes in the URI will be used to hash onto server
                                 slbCurCfgUrlRedirHeader 1.3.6.1.4.1.1872.2.1.5.27.1.11 integer read-only
This is for controlling if the switch should redirect packet to the cache server based on HTTP header. enabled(1) - Redirect web traffic based on HTTP header disabled(2)- Redirect web traffic based on URI Enumeration: 'disabled': 2, 'enabled': 1.
                                 slbNewCfgUrlRedirHeader 1.3.6.1.4.1.1872.2.1.5.27.1.12 integer read-write
This is for controlling if the switch should redirect packet to the cache server based on HTTP header. enabled(1) - Redirect web traffic based on HTTP header disabled(2)- Redirect web traffic based on URI Enumeration: 'disabled': 2, 'enabled': 1.
                                 slbCurCfgUrlRedirHeaderName 1.3.6.1.4.1.1872.2.1.5.27.1.13 displaystring read-only
HTTP header name
                                 slbNewCfgUrlRedirHeaderName 1.3.6.1.4.1.1872.2.1.5.27.1.14 displaystring read-write
HTTP header name
                             slbUrlBalance 1.3.6.1.4.1.1872.2.1.5.27.2
                                 slbCurCfgUrlLbPathTable 1.3.6.1.4.1.1872.2.1.5.27.2.1 no-access
The table of URL path for URL load balancing in the current_config.
                                     slbCurCfgUrlLbPathTableEntry 1.3.6.1.4.1.1872.2.1.5.27.2.1.1 no-access
Information about an URL path for URL load balancing.
                                         slbCurCfgUrlLbPathIndex 1.3.6.1.4.1.1872.2.1.5.27.2.1.1.1 integer read-only
The URL path table index.
                                         slbCurCfgUrlLbPathString 1.3.6.1.4.1.1872.2.1.5.27.2.1.1.2 displaystring read-only
The URL path for URL load balancing.
                                 slbNewCfgUrlLbPathTable 1.3.6.1.4.1.1872.2.1.5.27.2.2 no-access
The table of URL path for URL load balancing in the new_config.
                                     slbNewCfgUrlLbPathTableEntry 1.3.6.1.4.1.1872.2.1.5.27.2.2.1 no-access
Information about an URL path for URL load balancing.
                                         slbNewCfgUrlLbPathIndex 1.3.6.1.4.1.1872.2.1.5.27.2.2.1.1 integer read-only
The URL path table index.
                                         slbNewCfgUrlLbPathString 1.3.6.1.4.1.1872.2.1.5.27.2.2.1.2 displaystring read-write
The URL path for URL load balancing.
                                         slbNewCfgUrlLbPathDelete 1.3.6.1.4.1.1872.2.1.5.27.2.2.1.3 integer read-write
Action object to delete an URL Path. When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                                 slbCurCfgUrlLbErrorMsg 1.3.6.1.4.1.1872.2.1.5.27.2.3 displaystring read-only
Customize error message to send back to client when switch cannot bind client's request to servers.
                                 slbNewCfgUrlLbErrorMsg 1.3.6.1.4.1.1872.2.1.5.27.2.4 displaystring read-write
Customize error message to send back to client when switch cannot bind client's request to servers.
                       slbCurCfgPmask 1.3.6.1.4.1.1872.2.1.5.28 ipaddress read-only
The persistent mask - corresponding to the pmask command of the slb configuration menu.
                       slbNewCfgPmask 1.3.6.1.4.1.1872.2.1.5.29 ipaddress read-write
The persistent mask - corresponding to the pmask command of the slb configuration menu.
                       slbCurCfgGrace 1.3.6.1.4.1.1872.2.1.5.30 integer read-only
Enable or disable graceful server failure. It allows to keep the connection to the failure real servers when set to enabled(1). Enumeration: 'disabled': 2, 'enabled': 1.
                       slbNewCfgGrace 1.3.6.1.4.1.1872.2.1.5.31 integer read-write
Enable or disable graceful server failure. It allows to keep the connection to the failure real servers when set to enabled(1). Enumeration: 'disabled': 2, 'enabled': 1.
                       slbCurCfgPeerTable 1.3.6.1.4.1.1872.2.1.5.32 no-access
The table of Synch Peer Switch configuration in the current_config.
                             slbCurCfgPeerEntry 1.3.6.1.4.1.1872.2.1.5.32.1 no-access
Information about Synch Peer Switch configuration.
                                 slbCurCfgPeerIndex 1.3.6.1.4.1.1872.2.1.5.32.1.1 integer read-only
The index for synch peer switchs.
                                 slbCurCfgPeerIpAddr 1.3.6.1.4.1.1872.2.1.5.32.1.2 ipaddress read-only
The IP address of the peer switch.
                                 slbCurCfgPeerState 1.3.6.1.4.1.1872.2.1.5.32.1.3 integer read-only
Enable or disable the peer switch. Enumeration: 'enable': 1, 'disable': 2.
                       slbNewCfgPeerTable 1.3.6.1.4.1.1872.2.1.5.33 no-access
The table of Synch Peer Switch configuration in the new_config.
                             slbNewCfgPeerEntry 1.3.6.1.4.1.1872.2.1.5.33.1 no-access
Information about synch peer switch configuration.
                                 slbNewCfgPeerIndex 1.3.6.1.4.1.1872.2.1.5.33.1.1 integer read-only
The index number for synch peer switchs.
                                 slbNewCfgPeerIpAddr 1.3.6.1.4.1.1872.2.1.5.33.1.2 ipaddress read-write
The IP address of the peer switch.
                                 slbNewCfgPeerState 1.3.6.1.4.1.1872.2.1.5.33.1.3 integer read-write
Enable or disable the peer switch. Enumeration: 'enable': 1, 'disable': 2.
                                 slbNewCfgPeerDelete 1.3.6.1.4.1.1872.2.1.5.33.1.4 integer read-write
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                       slbCurCfgSyncFilt 1.3.6.1.4.1.1872.2.1.5.34 integer read-only
Enable or disable synch filter configuration. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbNewCfgSyncFilt 1.3.6.1.4.1.1872.2.1.5.35 integer read-write
Enable or disable synch filter configuration. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbCurCfgSyncPort 1.3.6.1.4.1.1872.2.1.5.36 integer read-only
Enable or disable synch port configuration. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbNewCfgSyncPort 1.3.6.1.4.1.1872.2.1.5.37 integer read-write
Enable or disable synch port configuration. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbCurCfgSyncVrrp 1.3.6.1.4.1.1872.2.1.5.38 integer read-only
Enable or disable synch VRRP Priorities. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbNewCfgSyncVrrp 1.3.6.1.4.1.1872.2.1.5.39 integer read-write
Enable or disable synch VRRP Priorities. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbCurCfgSyncPip 1.3.6.1.4.1.1872.2.1.5.40 integer read-only
Enable or disable synch proxy IP addresses. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbNewCfgSyncPip 1.3.6.1.4.1.1872.2.1.5.41 integer read-write
Enable or disable synch proxy IP addresses. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbCurCfgVirtMatrixArch 1.3.6.1.4.1.1872.2.1.5.42 integer read-only
Enable or disable Virtual Matrix Architecture. Enumeration: 'disabled': 2, 'enabled': 1.
                       slbNewCfgVirtMatrixArch 1.3.6.1.4.1.1872.2.1.5.43 integer read-write
Enable or disable Virtual Matrix Architecture. Enumeration: 'disabled': 2, 'enabled': 1.
                   portmirroring 1.3.6.1.4.1.1872.2.1.6
                       pmCurCfgMonitoringPort 1.3.6.1.4.1.1872.2.1.6.1 integer read-only
The port number of the monitoring port.
                       pmNewCfgMonitoringPort 1.3.6.1.4.1.1872.2.1.6.2 integer read-write
The port number of the monitoring port.
                       pmCurCfgMirroredPort 1.3.6.1.4.1.1872.2.1.6.3 integer read-only
The port number of the mirrored port.
                       pmNewCfgMirroredPort 1.3.6.1.4.1.1872.2.1.6.4 integer read-write
The port number of the mirrored port.
                       pmCurCfgMonitoredTraffic 1.3.6.1.4.1.1872.2.1.6.5 integer read-only
The type of traffic to be monitored with respect to the mirrored port. Enumeration: 'received': 3, 'none': 2, 'other': 1, 'transmitted': 4, 'both': 5.
                       pmNewCfgMonitoredTraffic 1.3.6.1.4.1.1872.2.1.6.6 integer read-write
The type of traffic to be monitored with respect to the mirrored port. Enumeration: 'received': 3, 'none': 2, 'other': 1, 'transmitted': 4, 'both': 5.
                       pmCurCfgState 1.3.6.1.4.1.1872.2.1.6.7 integer read-only
The state of Port mirroring. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                       pmNewCfgState 1.3.6.1.4.1.1872.2.1.6.8 integer read-write
The state of Port mirroring. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                   trunkgroup 1.3.6.1.4.1.1872.2.1.7
                       trunkGroupTableMaxSize 1.3.6.1.4.1.1872.2.1.7.1 integer read-only
The maximum number of entries in trunk group table.
                       trunkGroupCurCfgTable 1.3.6.1.4.1.1872.2.1.7.2 no-access
The table of trunk group configuration.
                           trunkGroupCurCfgTableEntry 1.3.6.1.4.1.1872.2.1.7.2.1 no-access
A row in the trunk group configuration table.
                               trunkGroupCurCfgIndex 1.3.6.1.4.1.1872.2.1.7.2.1.1 integer read-only
The identifier of the trunk group.
                               trunkGroupCurCfgPorts 1.3.6.1.4.1.1872.2.1.7.2.1.2 octet string read-only
The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group
                               trunkGroupCurCfgState 1.3.6.1.4.1.1872.2.1.7.2.1.3 integer read-only
Enable or disable a trunk group. Enumeration: 'enable': 1, 'disable': 2.
                               trunkGroupCurCfgBwmContract 1.3.6.1.4.1.1872.2.1.7.2.1.4 integer read-only
Default BW contract of a trunk group.
                       trunkGroupNewCfgTable 1.3.6.1.4.1.1872.2.1.7.3 no-access
The table of trunk group configuration.
                           trunkGroupNewCfgTableEntry 1.3.6.1.4.1.1872.2.1.7.3.1 no-access
A row in the trunk group configuration table.
                               trunkGroupNewCfgIndex 1.3.6.1.4.1.1872.2.1.7.3.1.1 integer read-only
The identifier of the trunk group.
                               trunkGroupNewCfgPorts 1.3.6.1.4.1.1872.2.1.7.3.1.2 octet string read-only
The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group
                               trunkGroupNewCfgAddPort 1.3.6.1.4.1.1872.2.1.7.3.1.3 integer read-write
The port to be added in the trunk group. When read, 0 is returned.
                               trunkGroupNewCfgRemovePort 1.3.6.1.4.1.1872.2.1.7.3.1.4 integer read-write
The port to be deleted from the trunk group. when read, 0 is returned.
                               trunkGroupNewCfgState 1.3.6.1.4.1.1872.2.1.7.3.1.5 integer read-write
Enable or disable a trunk group. Enumeration: 'enable': 1, 'disable': 2.
                               trunkGroupNewCfgDelete 1.3.6.1.4.1.1872.2.1.7.3.1.6 integer read-write
Setting the value to delete(2) will delete the entire row. When read, other(1) is returned. Enumeration: 'other': 1, 'delete': 2.
                               trunkGroupNewCfgBwmContract 1.3.6.1.4.1.1872.2.1.7.3.1.7 integer read-write
Default BW contract of a trunk group.
                   stats 1.3.6.1.4.1.1872.2.1.8
                       ripStats 1.3.6.1.4.1.1872.2.1.8.1
                           ripStatInPkts 1.3.6.1.4.1.1872.2.1.8.1.1 counter read-only
The total number of good RIP packets recieved.
                           ripStatOutPkts 1.3.6.1.4.1.1872.2.1.8.1.2 counter read-only
The total number of RIP packets transmitted.
                           ripStatInErrorPkts 1.3.6.1.4.1.1872.2.1.8.1.3 counter read-only
The total number of error RIP packets recieved.
                       slbStats 1.3.6.1.4.1.1872.2.1.8.2
                           slbStatPortMaintTable 1.3.6.1.4.1.1872.2.1.8.2.1 no-access
The table of SLB port maintenance statistics.
                               slbStatPortMaintEntry 1.3.6.1.4.1.1872.2.1.8.2.1.1 no-access
A row in the SLB port maintenance statistcs table.
                                   slbStatPortMaintPortIndex 1.3.6.1.4.1.1872.2.1.8.2.1.1.1 integer read-only
The port number for which the statistics apply.
                                   slbStatPortMaintCurBindings 1.3.6.1.4.1.1872.2.1.8.2.1.1.2 gauge read-only
The current number of bindings on the port.
                                   slbStatPortMaintBindingFails 1.3.6.1.4.1.1872.2.1.8.2.1.1.3 counter read-only
The total number of Binding failures on the port. A Binding Failure occurs when a port runs out of binding table entries.
                                   slbStatPortMaintNonTcpFrames 1.3.6.1.4.1.1872.2.1.8.2.1.1.4 counter read-only
The total number of non-TCP/IP frames dropped on the port.
                                   slbStatPortMaintTcpFragments 1.3.6.1.4.1.1872.2.1.8.2.1.1.5 counter read-only
The total number of TCP fragments dropped on the port.
                                   slbStatPortMaintUdpDatagrams 1.3.6.1.4.1.1872.2.1.8.2.1.1.6 counter read-only
The total number of UDP datagrams dropped on the port.
                                   slbStatPortMaintIncorrectVIPs 1.3.6.1.4.1.1872.2.1.8.2.1.1.7 counter read-only
The total number of frames with incorrect VIPs that are dropped on the port.
                                   slbStatPortMaintIncorrectVports 1.3.6.1.4.1.1872.2.1.8.2.1.1.8 counter read-only
The total number of frames with incorrect Virtual Port that are dropped on the port.
                                   slbStatPortMaintRealServerNoAvails 1.3.6.1.4.1.1872.2.1.8.2.1.1.9 counter read-only
The total number of frames that are dropped on the port because no real server is available.
                                   slbStatPortMaintFilteredDeniedFrames 1.3.6.1.4.1.1872.2.1.8.2.1.1.10 counter read-only
The total number of frames that are denied on the port by the filter.
                           slbStatPortRealServerTable 1.3.6.1.4.1.1872.2.1.8.2.2 no-access
The port-server statistics table. This table shows the statistics of real servers that are connectted to switch ports.
                               slbStatPortRealServerEntry 1.3.6.1.4.1.1872.2.1.8.2.2.1 no-access
A row in the port-server statistics table.
                                   slbStatPortRealServerPortIndex 1.3.6.1.4.1.1872.2.1.8.2.2.1.1 integer read-only
The port number that identifies the switch port.
                                   slbStatPortRealServerServerIndex 1.3.6.1.4.1.1872.2.1.8.2.2.1.2 integer read-only
The real server number that identifies the server.
                                   slbStatPortRealServerCurrSessions 1.3.6.1.4.1.1872.2.1.8.2.2.1.3 gauge read-only
The current sessions for the real server.
                                   slbStatPortRealServerTotalSessions 1.3.6.1.4.1.1872.2.1.8.2.2.1.4 counter read-only
The total number of sessions for the real server.
                                   slbStatPortRealServerHCOctets 1.3.6.1.4.1.1872.2.1.8.2.2.1.5 counter64 read-only
The total number of octets received and transmitted out of the real server on a particular port.
                                   slbStatPortRealServerHCOctetsLow32 1.3.6.1.4.1.1872.2.1.8.2.2.1.6 counter read-only
The lower 32 bit value of the total octets received and transmitted out of the real server on a particular port.
                                   slbStatPortRealServerHCOctetsHigh32 1.3.6.1.4.1.1872.2.1.8.2.2.1.7 counter read-only
The higher 32 bit value of the total octets received and transmitted out of the real server on a particular port.
                           slbStatMaintBackupServActs 1.3.6.1.4.1.1872.2.1.8.2.3 counter read-only
The total number of times that backup servers become active due to failure of primary servers.
                           slbStatMaintOverflowServActs 1.3.6.1.4.1.1872.2.1.8.2.4 counter read-only
The total number of times that backup servers become active due to primary servers reach overflow situation.
                           slbStatRServerTable 1.3.6.1.4.1.1872.2.1.8.2.5 no-access
The real server statistics table.
                               slbStatRServerEntry 1.3.6.1.4.1.1872.2.1.8.2.5.1 no-access
The statistics of a particular real server.
                                   slbStatRServerIndex 1.3.6.1.4.1.1872.2.1.8.2.5.1.1 integer read-only
The real server number that identifies the server.
                                   slbStatRServerCurrSessions 1.3.6.1.4.1.1872.2.1.8.2.5.1.2 gauge read-only
The number of sessions that are currently handled by the real server.
                                   slbStatRServerTotalSessions 1.3.6.1.4.1.1872.2.1.8.2.5.1.3 counter read-only
The total number of sessions that are handled by the real server.
                                   slbStatRServerFailures 1.3.6.1.4.1.1872.2.1.8.2.5.1.4 counter read-only
The total number of times that the real server is claimed down.
                                   slbStatRServerHighestSessions 1.3.6.1.4.1.1872.2.1.8.2.5.1.5 counter read-only
The highest sessions that have been handled by the real server.
                                   slbStatRServerHCOctets 1.3.6.1.4.1.1872.2.1.8.2.5.1.6 counter64 read-only
The total number of octets received and transmitted out of the real server.
                                   slbStatRServerHCOctetsLow32 1.3.6.1.4.1.1872.2.1.8.2.5.1.7 counter read-only
The lower 32 bit value of octets received and transmitted out of the real server.
                                   slbStatRServerHCOctetsHigh32 1.3.6.1.4.1.1872.2.1.8.2.5.1.8 counter read-only
The higher 32 bit value of octets received and transmitted out of the real server.
                           slbStatGroupTable 1.3.6.1.4.1.1872.2.1.8.2.6 no-access
The real server group statistics table.
                               slbStatGroupEntry 1.3.6.1.4.1.1872.2.1.8.2.6.1 no-access
The statistics of a particular real server group.
                                   slbStatGroupIndex 1.3.6.1.4.1.1872.2.1.8.2.6.1.1 integer read-only
The real server group number that identifies the group.
                                   slbStatGroupCurrSessions 1.3.6.1.4.1.1872.2.1.8.2.6.1.2 gauge read-only
The number of sessions that are currently handled by the real server group.
                                   slbStatGroupTotalSessions 1.3.6.1.4.1.1872.2.1.8.2.6.1.3 counter read-only
The total number of sessions that are handled by the real server group.
                                   slbStatGroupHighestSessions 1.3.6.1.4.1.1872.2.1.8.2.6.1.4 counter read-only
The highest sessions that have been handled by the real server.
                                   slbStatGroupHCOctets 1.3.6.1.4.1.1872.2.1.8.2.6.1.5 counter64 read-only
The total number of octets received and transmitted out of the real server group.
                                   slbStatGroupHCOctetsLow32 1.3.6.1.4.1.1872.2.1.8.2.6.1.6 counter read-only
The lower 32 bit value of octets received and transmitted out of the real server group.
                                   slbStatGroupHCOctetsHigh32 1.3.6.1.4.1.1872.2.1.8.2.6.1.7 counter read-only
The higher 32 bit value of octets received and transmitted out of the real server group.
                           slbStatVServerTable 1.3.6.1.4.1.1872.2.1.8.2.7 no-access
The virtual server statistics table.
                               slbStatVServerEntry 1.3.6.1.4.1.1872.2.1.8.2.7.1 no-access
The statistics of a particular virtual server group.
                                   slbStatVServerIndex 1.3.6.1.4.1.1872.2.1.8.2.7.1.1 integer read-only
The virtual server number that identifies the server.
                                   slbStatVServerCurrSessions 1.3.6.1.4.1.1872.2.1.8.2.7.1.2 gauge read-only
The number of sessions that are currently handled by the virtual server.
                                   slbStatVServerTotalSessions 1.3.6.1.4.1.1872.2.1.8.2.7.1.3 counter read-only
The total number of sessions that are handled by the virtual server.
                                   slbStatVServerHighestSessions 1.3.6.1.4.1.1872.2.1.8.2.7.1.4 counter read-only
The highest sessions that have been handled by the real server.
                                   slbStatVServerHCOctets 1.3.6.1.4.1.1872.2.1.8.2.7.1.5 counter64 read-only
The total number of octets received and transmitted out of the virtual server.
                                   slbStatVServerHCOctetsLow32 1.3.6.1.4.1.1872.2.1.8.2.7.1.6 counter read-only
The lower 32 bit value of octets received and transmitted out of the virtual server.
                                   slbStatVServerHCOctetsHigh32 1.3.6.1.4.1.1872.2.1.8.2.7.1.7 counter read-only
The higher 32 bit value of octets received and transmitted out of the virtual server.
                                   slbStatVServerHeaderHits 1.3.6.1.4.1.1872.2.1.8.2.7.1.8 counter read-only
The current HTTP header hits.
                                   slbStatVServerHeaderMisses 1.3.6.1.4.1.1872.2.1.8.2.7.1.9 counter read-only
The current HTTP header misses.
                                   slbStatVServerHeaderTotalSessions 1.3.6.1.4.1.1872.2.1.8.2.7.1.10 counter read-only
The total HTTP header sessions.
                       arpStats 1.3.6.1.4.1.1872.2.1.8.3
                           arpStatEntries 1.3.6.1.4.1.1872.2.1.8.3.1 gauge read-only
The current number of ARP entries.
                           arpStatHighWater 1.3.6.1.4.1.1872.2.1.8.3.2 gauge read-only
The highest number of ARP entries.
                           arpStatMaxEntries 1.3.6.1.4.1.1872.2.1.8.3.3 gauge read-only
The maximum number of ARP entries.
                       routeStats 1.3.6.1.4.1.1872.2.1.8.4
                           routeStatEntries 1.3.6.1.4.1.1872.2.1.8.4.1 gauge read-only
The current number of IP routes.
                           routeStatHighWater 1.3.6.1.4.1.1872.2.1.8.4.2 gauge read-only
The highest number of IP routes.
                           routeStatMaxEntries 1.3.6.1.4.1.1872.2.1.8.4.3 gauge read-only
The maximum number of IP routes.
                       dnsStats 1.3.6.1.4.1.1872.2.1.8.5
                           dnsStatInGoodDnsRequests 1.3.6.1.4.1.1872.2.1.8.5.1 counter read-only
The number of good DNS requests which are received.
                           dnsStatInBadDnsRequests 1.3.6.1.4.1.1872.2.1.8.5.2 counter read-only
The number of bad DNS requests which are received.
                       filterStats 1.3.6.1.4.1.1872.2.1.8.6
                           fltStatTable 1.3.6.1.4.1.1872.2.1.8.6.1 no-access
The filter statistics table.
                               fltStatTableEntry 1.3.6.1.4.1.1872.2.1.8.6.1.1 no-access
A row in filter statistics table.
                                   fltStatFltIndex 1.3.6.1.4.1.1872.2.1.8.6.1.1.1 integer read-only
The number that identifies the filter.
                                   fltStatFltFirings 1.3.6.1.4.1.1872.2.1.8.6.1.1.2 counter read-only
The number of instances that the received packet matches the filter rule.
                       gslbStats 1.3.6.1.4.1.1872.2.1.8.7
                           gslbStatRemRealServerTable 1.3.6.1.4.1.1872.2.1.8.7.1 no-access
The GSLB remote real server statistics table.
                               gslbStatRemRealServerEntry 1.3.6.1.4.1.1872.2.1.8.7.1.1 no-access
A row in the remote real server statistics table.
                                   gslbStatRemRealServerIndex 1.3.6.1.4.1.1872.2.1.8.7.1.1.1 integer read-only
The server number that identifies the remote real server.
                                   gslbStatRemRealServerDnsHandoffs 1.3.6.1.4.1.1872.2.1.8.7.1.1.2 counter read-only
The number of DNS hanfoffs by the remote real server.
                                   gslbStatRemRealServerHttpRedirs 1.3.6.1.4.1.1872.2.1.8.7.1.1.3 counter read-only
The number of HTTP redirections by the remote real server.
                       gslbMaintStats 1.3.6.1.4.1.1872.2.1.8.8
                           gslbStatMaintInGoodSiteUpdates 1.3.6.1.4.1.1872.2.1.8.8.1 counter read-only
The number of good remote site updates which are received.
                           gslbStatMaintInBadSiteUpdates 1.3.6.1.4.1.1872.2.1.8.8.2 counter read-only
The number of bad remote site updates which are received.
                       vrrpStats 1.3.6.1.4.1.1872.2.1.8.9
                           vrrpStatInAdvers 1.3.6.1.4.1.1872.2.1.8.9.1 counter read-only
The number of good VRRP advertisements which are received.
                           vrrpStatOutAdvers 1.3.6.1.4.1.1872.2.1.8.9.2 counter read-only
The number of good VRRP advertisements which are transmitted.
                           vrrpStatOutBadAdvers 1.3.6.1.4.1.1872.2.1.8.9.3 counter read-only
The number of bad VRRP advertisements which are received.
                       urlStats 1.3.6.1.4.1.1872.2.1.8.10
                             urlRedirStats 1.3.6.1.4.1.1872.2.1.8.10.1
                                 urlStatRedRedirs 1.3.6.1.4.1.1872.2.1.8.10.1.1 counter read-only
The number of instances that the received packet matches the specified URL expressions and redirected to specified group of real servers.
                                 urlStatRedOrigSrvs 1.3.6.1.4.1.1872.2.1.8.10.1.2 counter read-only
The number of instances that the received packet is sent to the origin server due to mis-match with the specified URL expressions or detecting of HTTP non-GETs,user cookies, and no-cache as users configuration.
                                 urlStatRedNonGets 1.3.6.1.4.1.1872.2.1.8.10.1.3 counter read-only
The number of instances that the received packet contains none GETs(POST ,HEAD ,PUT..) methods.
                                 urlStatRedCookie 1.3.6.1.4.1.1872.2.1.8.10.1.4 counter read-only
The number of instances that the received packet contains a 'Cookie: ' header.
                                 urlStatRedNoCache 1.3.6.1.4.1.1872.2.1.8.10.1.5 counter read-only
The number of instances that the received packet contains a no-cache header value.
                             urlSlbStats 1.3.6.1.4.1.1872.2.1.8.10.2
                                 urlStatSlbPathTable 1.3.6.1.4.1.1872.2.1.8.10.2.1 no-access
The statistics table of instances that URL pathes matched.
                                     urlStatSlbPathTableEntry 1.3.6.1.4.1.1872.2.1.8.10.2.1.1 no-access
Information about the number of instances that are load-balanced due to match of a particular URL path.
                                         urlStatSlbPathIndex 1.3.6.1.4.1.1872.2.1.8.10.2.1.1.1 integer read-only
The URL path table index.
                                         urlStatSlbPathHits 1.3.6.1.4.1.1872.2.1.8.10.2.1.1.2 counter read-only
The number of instances that are load-balanced due to match of the particular URL path.
                       tcpStats 1.3.6.1.4.1.1872.2.1.8.11
                             tcpStatCurConns 1.3.6.1.4.1.1872.2.1.8.11.1 gauge read-only
The total number of outstanding TCP connections have been established.
                             tcpStatHalfOpens 1.3.6.1.4.1.1872.2.1.8.11.2 gauge read-only
The total number of outstanding TCP connections have been half opened. This statistics is valid only when URL parsing has been truned on. It is incremented when the switch respond to TCP SYN packet and decremented upon receiving TCP SYN ACK packet from the requester.
                       memStats 1.3.6.1.4.1.1872.2.1.8.12
                             memStatsAllocs 1.3.6.1.4.1.1872.2.1.8.12.1 counter read-only
The total number of memory allocations.
                             memStatsFrees 1.3.6.1.4.1.1872.2.1.8.12.2 counter read-only
The total number of memory frees.
                             memStatsAllocFails 1.3.6.1.4.1.1872.2.1.8.12.3 counter read-only
The total number of memory allocations failed.
                             memStatsBytesCurr 1.3.6.1.4.1.1872.2.1.8.12.4 gauge read-only
The outstanding memory in bytes have been allocated.
                             memStatsBytesHiwat 1.3.6.1.4.1.1872.2.1.8.12.5 gauge read-only
The highest number of bytes have even been allocated.
                             memStatsPoolBytes 1.3.6.1.4.1.1872.2.1.8.12.6 gauge read-only
The total bytes in the memory pool.
                             memStatsLargest 1.3.6.1.4.1.1872.2.1.8.12.7 gauge read-only
The largest block has been allocated.
                       pktStats 1.3.6.1.4.1.1872.2.1.8.13
                             pktStatsAllocs 1.3.6.1.4.1.1872.2.1.8.13.1 counter read-only
The total packets have been allocated.
                             pktStatsFrees 1.3.6.1.4.1.1872.2.1.8.13.2 counter read-only
The total packets have been freed.
                             pktStatsAllocFails 1.3.6.1.4.1.1872.2.1.8.13.3 counter read-only
The total packet allocations failed.
                             pktStatsMediums 1.3.6.1.4.1.1872.2.1.8.13.4 counter read-only
The number of medium size packets have been allocated.
                             pktStatsJumbos 1.3.6.1.4.1.1872.2.1.8.13.5 counter read-only
The number of jumbo size packets have been allocated.
                             pktStatsSmalls 1.3.6.1.4.1.1872.2.1.8.13.6 counter read-only
The number of small size packets have been allocated.
                       ftpStats 1.3.6.1.4.1.1872.2.1.8.14
                             ftpSlbStats 1.3.6.1.4.1.1872.2.1.8.14.1
                                 ftpSlbStatTotal 1.3.6.1.4.1.1872.2.1.8.14.1.1 counter read-only
The total number of ftp control sesssion for SLB received after FTP parsing turn on.
                                 ftpNatStatTotal 1.3.6.1.4.1.1872.2.1.8.14.1.2 counter read-only
The total number of FTP control session for NAT received after active FTP is turn on.
                       bwmStats 1.3.6.1.4.1.1872.2.1.8.15
                             bwmStatTcTable 1.3.6.1.4.1.1872.2.1.8.15.1 no-access
The table of Bandwidth Management Traffic Contract statistics.
                                 bwmStatTcEntry 1.3.6.1.4.1.1872.2.1.8.15.1.1 no-access
A row in the BWM traffic contract table.
                                     bwmStatTcContractIndex 1.3.6.1.4.1.1872.2.1.8.15.1.1.1 integer read-only
The contract queue number for which the statistics apply.
                                     bwmStatTcName 1.3.6.1.4.1.1872.2.1.8.15.1.1.2 displaystring read-only
The name of the traffic contract queue.
                                     bwmStatTcOutoct 1.3.6.1.4.1.1872.2.1.8.15.1.1.3 counter read-only
The total number of octets sent out from the traffic contract queue.
                                     bwmStatTcOutdisoct 1.3.6.1.4.1.1872.2.1.8.15.1.1.4 counter read-only
The total number of octets dropped from the traffic contract queue.
                                     bwmStatTcBufferUsed 1.3.6.1.4.1.1872.2.1.8.15.1.1.5 counter read-only
The total number of buffers used by the traffic contract queue.
                                     bwmStatTcBufferMax 1.3.6.1.4.1.1872.2.1.8.15.1.1.6 counter read-only
The total number of buffers assigned to the traffic contract queue.
                             bwmStatTcrTable 1.3.6.1.4.1.1872.2.1.8.15.2 no-access
The table of Bandwidth Management Traffic Contract Rate statistics.
                                 bwmStatTcrEntry 1.3.6.1.4.1.1872.2.1.8.15.2.1 no-access
A row in the BWM traffic contract rate table.
                                     bwmStatTcrContractIndex 1.3.6.1.4.1.1872.2.1.8.15.2.1.1 integer read-only
The contract queue number for which the statistics apply.
                                     bwmStatTcrName 1.3.6.1.4.1.1872.2.1.8.15.2.1.2 displaystring read-only
The name of the traffic contract queue.
                                     bwmStatTcrRate 1.3.6.1.4.1.1872.2.1.8.15.2.1.3 integer read-only
The rate of octets sent out from the traffic contract queue.
                                     bwmStatTcrOutoct 1.3.6.1.4.1.1872.2.1.8.15.2.1.4 counter read-only
The of octets sent out from the traffic contract queue.
                                     bwmStatTcrOutdisoct 1.3.6.1.4.1.1872.2.1.8.15.2.1.5 counter read-only
The total number of octets dropped from the traffic contract queue.
                                     bwmStatTcrBufferUsed 1.3.6.1.4.1.1872.2.1.8.15.2.1.6 counter read-only
The total number of buffers used by the traffic contract queue.
                                     bwmStatTcrBufferMax 1.3.6.1.4.1.1872.2.1.8.15.2.1.7 counter read-only
The total number of buffers assigned to the traffic contract queue.
                             bwmStatSpTcTable 1.3.6.1.4.1.1872.2.1.8.15.3 no-access
The table of Bandwidth Management Switch Port Traffic Contract statistics.
                                 bwmStatSpTcEntry 1.3.6.1.4.1.1872.2.1.8.15.3.1 no-access
A row in the BWM SP traffic contract table.
                                     bwmStatSpTcPortIndex 1.3.6.1.4.1.1872.2.1.8.15.3.1.1 integer read-only
The Switch Port number for which the statistics apply.
                                     bwmStatSpTcContractIndex 1.3.6.1.4.1.1872.2.1.8.15.3.1.2 integer read-only
The contract queue number for which the statistics apply.
                                     bwmStatSpTcName 1.3.6.1.4.1.1872.2.1.8.15.3.1.3 displaystring read-only
The name of the traffic contract queue.
                                     bwmStatSpTcOutoct 1.3.6.1.4.1.1872.2.1.8.15.3.1.4 counter read-only
The total number of octets sent out from the traffic contract queue.
                                     bwmStatSpTcOutdisoct 1.3.6.1.4.1.1872.2.1.8.15.3.1.5 counter read-only
The total number of octets dropped from the traffic contract queue.
                                     bwmStatSpTcBufferUsed 1.3.6.1.4.1.1872.2.1.8.15.3.1.6 counter read-only
The total number of buffers used by the traffic contract queue.
                                     bwmStatSpTcBufferMax 1.3.6.1.4.1.1872.2.1.8.15.3.1.7 counter read-only
The total number of buffers assigned to the traffic contract queue.
                             bwmStatSpTcrTable 1.3.6.1.4.1.1872.2.1.8.15.4 no-access
The table of Bandwidth Management Switch Port Traffic Contract Rate statistics.
                                 bwmStatSpTcrEntry 1.3.6.1.4.1.1872.2.1.8.15.4.1 no-access
A row in the BWM traffic contract rate table.
                                     bwmStatSpTcrPortIndex 1.3.6.1.4.1.1872.2.1.8.15.4.1.1 integer read-only
The switch port number for which the statistics apply.
                                     bwmStatSpTcrContractIndex 1.3.6.1.4.1.1872.2.1.8.15.4.1.2 integer read-only
The contract queue number for which the statistics apply.
                                     bwmStatSpTcrName 1.3.6.1.4.1.1872.2.1.8.15.4.1.3 displaystring read-only
The name of the traffic contract queue.
                                     bwmStatSpTcrRate 1.3.6.1.4.1.1872.2.1.8.15.4.1.4 integer read-only
The rate of octets sent out from the traffic contract queue.
                                     bwmStatSpTcrOutoct 1.3.6.1.4.1.1872.2.1.8.15.4.1.5 counter read-only
The of octets sent out from the traffic contract queue.
                                     bwmStatSpTcrOutdisoct 1.3.6.1.4.1.1872.2.1.8.15.4.1.6 counter read-only
The total number of octets dropped from the traffic contract queue.
                                     bwmStatSpTcrBufferUsed 1.3.6.1.4.1.1872.2.1.8.15.4.1.7 counter read-only
The total number of buffers used by the traffic contract queue.
                                     bwmStatSpTcrBufferMax 1.3.6.1.4.1.1872.2.1.8.15.4.1.8 counter read-only
The total number of buffers assigned to the traffic contract queue.
                   information 1.3.6.1.4.1.1872.2.1.9
                       port_info 1.3.6.1.4.1.1872.2.1.9.1
                           portInfoTable 1.3.6.1.4.1.1872.2.1.9.1.1 no-access
The table of port information.
                               portInfoTableEntry 1.3.6.1.4.1.1872.2.1.9.1.1.1 no-access
A row in the port information table.
                                   portInfoIndx 1.3.6.1.4.1.1872.2.1.9.1.1.1.1 integer read-only
The port index.
                                   portInfoSpeed 1.3.6.1.4.1.1872.2.1.9.1.1.1.2 integer read-only
The current operational speed of the port. Enumeration: 'mbs1000': 4, 'mbs10': 2, 'other': 1, 'mbs100': 3.
                                   portInfoMode 1.3.6.1.4.1.1872.2.1.9.1.1.1.3 integer read-only
The current operational mode of the port. Enumeration: 'half-duplex': 3, 'other': 1, 'full-duplex': 2.
                                   portInfoFlowCtrl 1.3.6.1.4.1.1872.2.1.9.1.1.1.4 integer read-only
The current operational flow control of the port. Enumeration: 'transmit': 2, 'receive': 3, 'none': 5, 'other': 1, 'both': 4.
                                   portInfoLink 1.3.6.1.4.1.1872.2.1.9.1.1.1.5 integer read-only
The current operational link status of the port. Enumeration: 'down': 2, 'disabled': 3, 'inoperative': 4, 'up': 1.
                       slb_info 1.3.6.1.4.1.1872.2.1.9.2
                           slbFailOverInfoTable 1.3.6.1.4.1.1872.2.1.9.2.1 no-access
The table of switch fail-over run-time status.
                               slbFailOverInfoEntry 1.3.6.1.4.1.1872.2.1.9.2.1.1 no-access
A row in the switch fail-over information table.
                                   slbFailOverInfoIndex 1.3.6.1.4.1.1872.2.1.9.2.1.1.1 integer read-only
The index of switch fail-over information table.
                                   slbFailOverInfoPrimaryIp 1.3.6.1.4.1.1872.2.1.9.2.1.1.2 ipaddress read-only
IP address of the primary switch.
                                   slbFailOverInfoPrimaryStatus 1.3.6.1.4.1.1872.2.1.9.2.1.1.3 integer read-only
The current operational status of the primary switch. Enumeration: 'down': 2, 'up': 1.
                                   slbFailOverInfoPrimaryState 1.3.6.1.4.1.1872.2.1.9.2.1.1.4 integer read-only
The current operational state of the primary switch. Enumeration: 'active': 1, 'standby': 2.
                                   slbFailOverInfoSecondaryIp 1.3.6.1.4.1.1872.2.1.9.2.1.1.5 ipaddress read-only
IP address of the secondary switch.
                                   slbFailOverInfoSecondaryStatus 1.3.6.1.4.1.1872.2.1.9.2.1.1.6 integer read-only
The current operational status of the secondary switch. Enumeration: 'down': 2, 'up': 1.
                                   slbFailOverInfoSecondaryState 1.3.6.1.4.1.1872.2.1.9.2.1.1.7 integer read-only
The current operational state of the secondary switch. Enumeration: 'active': 1, 'standby': 2.
                           slbRealServerInfoTable 1.3.6.1.4.1.1872.2.1.9.2.2 no-access
The table of real server run-time information.
                               slbRealServerInfoEntry 1.3.6.1.4.1.1872.2.1.9.2.2.1 no-access
A row in the real server information table.
                                   slbRealServerInfoIndex 1.3.6.1.4.1.1872.2.1.9.2.2.1.1 integer read-only
The real server index
                                   slbRealServerInfoIpAddr 1.3.6.1.4.1.1872.2.1.9.2.2.1.2 ipaddress read-only
IP address of the real server.
                                   slbRealServerMacAddr 1.3.6.1.4.1.1872.2.1.9.2.2.1.3 physaddress read-only
The MAC address of the real server.
                                   slbRealServerInfoSwitchPort 1.3.6.1.4.1.1872.2.1.9.2.2.1.4 integer read-only
The switch port that the real server is connected to.
                                   slbRealServerInfoHealthLayer 1.3.6.1.4.1.1872.2.1.9.2.2.1.5 integer read-only
The OSI layer at whitch real server functionality is verified. Enumeration: 'layer3': 2, 'other': 1, 'layer4': 3.
                                   slbRealServerInfoOverflow 1.3.6.1.4.1.1872.2.1.9.2.2.1.6 integer read-only
The overflow state of the real server. Enumeration: 'overflow': 1, 'no-overflow': 2.
                                   slbRealServerInfoState 1.3.6.1.4.1.1872.2.1.9.2.2.1.7 integer read-only
The state of the real server. Enumeration: 'disabled': 4, 'failed': 3, 'running': 2, 'other': 1.
                       ip_info 1.3.6.1.4.1.1872.2.1.9.3
                           ipRouteInfoTable 1.3.6.1.4.1.1872.2.1.9.3.1 no-access
The table of run-time IP routes.
                               ipRouteInfoEntry 1.3.6.1.4.1.1872.2.1.9.3.1.1 no-access
A row in the run-time IP route table
                                   ipRouteInfoIndx 1.3.6.1.4.1.1872.2.1.9.3.1.1.1 integer read-only
The index of this route table.
                                   ipRouteInfoDestIp 1.3.6.1.4.1.1872.2.1.9.3.1.1.2 ipaddress read-only
The destination IP address of this route.
                                   ipRouteInfoMask 1.3.6.1.4.1.1872.2.1.9.3.1.1.3 ipaddress read-only
The destination IP mask of this route.
                                   ipRouteInfoGateway 1.3.6.1.4.1.1872.2.1.9.3.1.1.4 ipaddress read-only
The next-hop router address for this route.
                                   ipRouteInfoTag 1.3.6.1.4.1.1872.2.1.9.3.1.1.5 integer read-only
The tag-type for this route. Enumeration: 'fixed': 1, 'addr': 5, 'multicast': 9, 'snmp': 4, 'rip': 6, 'broadcast': 7, 'martian': 8, 'static': 3, 'icmp': 2.
                                   ipRouteInfoType 1.3.6.1.4.1.1872.2.1.9.3.1.1.6 integer read-only
The type of the route. Enumeration: 'multicast': 6, 'direct': 2, 'broadcast': 4, 'martian': 5, 'indirect': 1, 'local': 3, 'other': 7.
                                   ipRouteInfoInterface 1.3.6.1.4.1.1872.2.1.9.3.1.1.7 integer read-only
The interface number for which the destination address is applicable.
                           arpInfoTable 1.3.6.1.4.1.1872.2.1.9.3.2 no-access
The table of ARP entries.
                               arpInfoEntry 1.3.6.1.4.1.1872.2.1.9.3.2.1 no-access
A row in the ARP table
                                   arpInfoDestIp 1.3.6.1.4.1.1872.2.1.9.3.2.1.1 ipaddress read-only
The destination IP address of the ARP entry.
                                   arpInfoMacAddr 1.3.6.1.4.1.1872.2.1.9.3.2.1.2 physaddress read-only
The MAC address for the ARP entry.
                                   arpInfoVLAN 1.3.6.1.4.1.1872.2.1.9.3.2.1.3 integer read-only
The VLAN identifier for the ARP entry.
                                   arpInfoSrcPort 1.3.6.1.4.1.1872.2.1.9.3.2.1.4 integer read-only
The port number on which this entry's equivalence is effective.
                                   arpInfoRefPorts 1.3.6.1.4.1.1872.2.1.9.3.2.1.5 integer read-only
The rference ports associated with this ARP entry.
                                   arpInfoFlag 1.3.6.1.4.1.1872.2.1.9.3.2.1.6 integer read-only
The flag associated with this ARP entry. Enumeration: 'permanent': 3, 'clear': 1, 'unresolved': 2, 'indirect': 4.
                       vrrp_info 1.3.6.1.4.1.1872.2.1.9.4
                           vrrpInfoVirtRtrTable 1.3.6.1.4.1.1872.2.1.9.4.1 no-access
The table of VRRP virtual router run-time information.
                               vrrpInfoVirtRtrTableEntry 1.3.6.1.4.1.1872.2.1.9.4.1.1 no-access
The run-time information about a VRRP virtual router.
                                   vrrpInfoVirtRtrIndex 1.3.6.1.4.1.1872.2.1.9.4.1.1.1 integer read-only
The VRRP virtual router index.
                                   vrrpInfoVirtRtrState 1.3.6.1.4.1.1872.2.1.9.4.1.1.2 integer read-only
The VRRP virtual router state. Enumeration: 'backup': 3, 'init': 1, 'master': 2.
                   filtering 1.3.6.1.4.1.1872.2.1.10
                         fltCfgTableMaxSize 1.3.6.1.4.1.1872.2.1.10.1 integer read-only
The maximum number of filtering table entries.
                         fltCurCfgTable 1.3.6.1.4.1.1872.2.1.10.2 no-access
The filtering table in the new configuration block.
                             fltCurCfgTableEntry 1.3.6.1.4.1.1872.2.1.10.2.1 no-access
A row in the filtering table.
                                 fltCurCfgIndx 1.3.6.1.4.1.1872.2.1.10.2.1.1 integer read-only
The filtering table index.
                                 fltCurCfgSrcIp 1.3.6.1.4.1.1872.2.1.10.2.1.2 ipaddress read-only
The source IP address to be filtered.
                                 fltCurCfgSrcIpMask 1.3.6.1.4.1.1872.2.1.10.2.1.3 ipaddress read-only
The source IP sub-net mask for filtering.
                                 fltCurCfgDstIp 1.3.6.1.4.1.1872.2.1.10.2.1.4 ipaddress read-only
The destination IP address to be filtered.
                                 fltCurCfgDstIpMask 1.3.6.1.4.1.1872.2.1.10.2.1.5 ipaddress read-only
The destination IP sub-net mask for filtering.
                                 fltCurCfgProtocol 1.3.6.1.4.1.1872.2.1.10.2.1.6 integer read-only
The protocol to be filtered.
                                 fltCurCfgRangeHighSrcPort 1.3.6.1.4.1.1872.2.1.10.2.1.7 integer read-only
The higher source TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
                                 fltCurCfgRangeLowSrcPort 1.3.6.1.4.1.1872.2.1.10.2.1.8 integer read-only
The lower source TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
                                 fltCurCfgRangeLowDstPort 1.3.6.1.4.1.1872.2.1.10.2.1.9 integer read-only
The lower destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
                                 fltCurCfgRangeHighDstPort 1.3.6.1.4.1.1872.2.1.10.2.1.10 integer read-only
The higher destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
                                 fltCurCfgAction 1.3.6.1.4.1.1872.2.1.10.2.1.11 integer read-only
The action for the filtering rule. Enumeration: 'redirect': 3, 'deny': 2, 'nat': 4, 'allow': 1.
                                 fltCurCfgRedirPort 1.3.6.1.4.1.1872.2.1.10.2.1.12 integer read-only
The real server port number used for redirection.
                                 fltCurCfgRedirGroup 1.3.6.1.4.1.1872.2.1.10.2.1.13 integer read-only
The real server group to be redirected to.
                                 fltCurCfgLog 1.3.6.1.4.1.1872.2.1.10.2.1.14 integer read-only
Enable or disable logging. Enumeration: 'disabled': 2, 'enabled': 1.
                                 fltCurCfgState 1.3.6.1.4.1.1872.2.1.10.2.1.15 integer read-only
The state of this filtering rule. Enumeration: 'disabled': 2, 'enabled': 1.
                                 fltCurCfgNat 1.3.6.1.4.1.1872.2.1.10.2.1.16 integer read-only
The selection of destination or source for network address translatin. Enumeration: 'destination-address': 1, 'source-address': 2.
                                 fltCurCfgCache 1.3.6.1.4.1.1872.2.1.10.2.1.17 integer read-only
Enable or disable caching sessions that match filter. Enumeration: 'disabled': 2, 'enabled': 1.
                                 fltCurCfgInvert 1.3.6.1.4.1.1872.2.1.10.2.1.18 integer read-only
Turn the invert logic on or off for the filter entry. Enumeration: 'invert-off': 2, 'invert-on': 1.
                                 fltCurCfgClientProxy 1.3.6.1.4.1.1872.2.1.10.2.1.19 integer read-only
Enable or disable client proxy. Enumeration: 'disabled': 2, 'enabled': 1.
                                 fltCurCfgTcpAck 1.3.6.1.4.1.1872.2.1.10.2.1.20 integer read-only
Enable or disable filtering on matching TCP ACK and RST flag. Enumeration: 'disabled': 2, 'enabled': 1.
                                 fltCurCfgUrlRedir 1.3.6.1.4.1.1872.2.1.10.2.1.21 integer read-only
Enable or disable URL redirection. The URL expressions are defined in slbCurCfgUrlTable. Enumeration: 'disabled': 2, 'enabled': 1.
                                 fltCurCfgSrcMac 1.3.6.1.4.1.1872.2.1.10.2.1.22 physaddress read-only
The source MAC address to be filtered.
                                 fltCurCfgDstMac 1.3.6.1.4.1.1872.2.1.10.2.1.23 physaddress read-only
The Destination MAC address to be filtered.
                                 fltCurCfgFtpNatActive 1.3.6.1.4.1.1872.2.1.10.2.1.24 integer read-only
Enable or disable FTP NAT for active ftp only. Enumeration: 'disabled': 2, 'enabled': 1.
                                 fltCurCfgAclTcpUrg 1.3.6.1.4.1.1872.2.1.10.2.1.25 integer read-only
Enable or disable TCP URG packet. Enumeration: 'enable': 1, 'disable': 2.
                                 fltCurCfgAclTcpAck 1.3.6.1.4.1.1872.2.1.10.2.1.26 integer read-only
Enable or disable TCP ACK packet. Enumeration: 'enable': 1, 'disable': 2.
                                 fltCurCfgAclTcpPsh 1.3.6.1.4.1.1872.2.1.10.2.1.27 integer read-only
Enable or disable TCP PSH packet. Enumeration: 'enable': 1, 'disable': 2.
                                 fltCurCfgAclTcpRst 1.3.6.1.4.1.1872.2.1.10.2.1.28 integer read-only
Enable or disable TCP RST packet. Enumeration: 'enable': 1, 'disable': 2.
                                 fltCurCfgAclTcpSyn 1.3.6.1.4.1.1872.2.1.10.2.1.29 integer read-only
Enable or disable TCP SYN packet. Enumeration: 'enable': 1, 'disable': 2.
                                 fltCurCfgAclTcpFin 1.3.6.1.4.1.1872.2.1.10.2.1.30 integer read-only
Enable or disable TCP FIN packet. Enumeration: 'enable': 1, 'disable': 2.
                                 fltCurCfgAclIcmp 1.3.6.1.4.1.1872.2.1.10.2.1.31 integer read-only
ICMP type to be filtered.
                                 fltCurCfgAclIpOption 1.3.6.1.4.1.1872.2.1.10.2.1.32 integer read-only
Select an IP option to filter. Enumeration: 'strict': 5, 'rroute': 2, 'any': 1, 'loose': 4, 'tstamp': 3.
                                 fltCurCfgBwmContract 1.3.6.1.4.1.1872.2.1.10.2.1.33 integer read-only
Filt default BW contract number.
                                 fltCurCfgAclIpTos 1.3.6.1.4.1.1872.2.1.10.2.1.34 integer read-only
The IP TOS value to be filtered.
                                 fltCurCfgAclIpTosMask 1.3.6.1.4.1.1872.2.1.10.2.1.35 integer read-only
The IP TOS mask for filtering.
                                 fltCurCfgAclIpTosNew 1.3.6.1.4.1.1872.2.1.10.2.1.36 integer read-only
The new IP TOS value to over-write when filtering fired.
                                 fltCurCfgFwlb 1.3.6.1.4.1.1872.2.1.10.2.1.37 integer read-only
Enable or disable filtering on firewall redirect hash method. Enumeration: 'disabled': 2, 'enabled': 1.
                         fltNewCfgTable 1.3.6.1.4.1.1872.2.1.10.3 no-access
The filtering table in the new configuration block.
                             fltNewCfgTableEntry 1.3.6.1.4.1.1872.2.1.10.3.1 no-access
A row in the filtering table.
                                 fltNewCfgIndx 1.3.6.1.4.1.1872.2.1.10.3.1.1 integer read-only
The filtering table index.
                                 fltNewCfgSrcIp 1.3.6.1.4.1.1872.2.1.10.3.1.2 ipaddress read-write
The source IP address to be filtered.
                                 fltNewCfgSrcIpMask 1.3.6.1.4.1.1872.2.1.10.3.1.3 ipaddress read-write
The source IP sub-net mask for filtering.
                                 fltNewCfgDstIp 1.3.6.1.4.1.1872.2.1.10.3.1.4 ipaddress read-write
The destination IP address to be filtered.
                                 fltNewCfgDstIpMask 1.3.6.1.4.1.1872.2.1.10.3.1.5 ipaddress read-write
The destination IP sub-net mask for filtering.
                                 fltNewCfgProtocol 1.3.6.1.4.1.1872.2.1.10.3.1.6 integer read-write
The protocol to be filtered.
                                 fltNewCfgRangeHighSrcPort 1.3.6.1.4.1.1872.2.1.10.3.1.7 integer read-write
The higher source TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
                                 fltNewCfgRangeLowSrcPort 1.3.6.1.4.1.1872.2.1.10.3.1.8 integer read-write
The lower source TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
                                 fltNewCfgRangeLowDstPort 1.3.6.1.4.1.1872.2.1.10.3.1.9 integer read-write
The lower destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
                                 fltNewCfgRangeHighDstPort 1.3.6.1.4.1.1872.2.1.10.3.1.10 integer read-write
The higher destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
                                 fltNewCfgAction 1.3.6.1.4.1.1872.2.1.10.3.1.11 integer read-write
The action for the filtering rule. Enumeration: 'redirect': 3, 'deny': 2, 'nat': 4, 'allow': 1.
                                 fltNewCfgRedirPort 1.3.6.1.4.1.1872.2.1.10.3.1.12 integer read-write
The real server port number used for redirection.
                                 fltNewCfgRedirGroup 1.3.6.1.4.1.1872.2.1.10.3.1.13 integer read-write
The real server group to be redirected to.
                                 fltNewCfgLog 1.3.6.1.4.1.1872.2.1.10.3.1.14 integer read-write
Enable or disable logging. Enumeration: 'disabled': 2, 'enabled': 1.
                                 fltNewCfgState 1.3.6.1.4.1.1872.2.1.10.3.1.15 integer read-write
The state of this filtering rule. Enumeration: 'disabled': 2, 'enabled': 1.
                                 fltNewCfgDelete 1.3.6.1.4.1.1872.2.1.10.3.1.16 integer read-write
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                                 fltNewCfgNat 1.3.6.1.4.1.1872.2.1.10.3.1.17 integer read-write
The selection of destination or source for network address translatin. Enumeration: 'destination-address': 1, 'source-address': 2.
                                 fltNewCfgCache 1.3.6.1.4.1.1872.2.1.10.3.1.18 integer read-write
Enable or disable caching sessions that match filter. Enumeration: 'disabled': 2, 'enabled': 1.
                                 fltNewCfgInvert 1.3.6.1.4.1.1872.2.1.10.3.1.19 integer read-write
Turn the invert logic on or off for the filter entry. Enumeration: 'invert-off': 2, 'invert-on': 1.
                                 fltNewCfgClientProxy 1.3.6.1.4.1.1872.2.1.10.3.1.20 integer read-write
Enable or disable client proxy. Enumeration: 'disabled': 2, 'enabled': 1.
                                 fltNewCfgTcpAck 1.3.6.1.4.1.1872.2.1.10.3.1.21 integer read-write
Enable or disable filtering on matching TCP ACK and RST flag. Enumeration: 'disabled': 2, 'enabled': 1.
                                 fltNewCfgUrlRedir 1.3.6.1.4.1.1872.2.1.10.3.1.22 integer read-write
Enable or disable URL redirection. The URL expressions are defined in slbNewCfgUrlTable. Enumeration: 'disabled': 2, 'enabled': 1.
                                 fltNewCfgSrcMac 1.3.6.1.4.1.1872.2.1.10.3.1.23 physaddress read-write
The source MAC address to be filtered.
                                 fltNewCfgDstMac 1.3.6.1.4.1.1872.2.1.10.3.1.24 physaddress read-write
The Destination MAC address to be filtered.
                                 fltNewCfgFtpNatActive 1.3.6.1.4.1.1872.2.1.10.3.1.25 integer read-write
Enable or disable FTP NAT for active ftp. Enumeration: 'disabled': 2, 'enabled': 1.
                                 fltNewCfgAclTcpUrg 1.3.6.1.4.1.1872.2.1.10.3.1.26 integer read-write
E or disable TCP URG packet. Enumeration: 'enable': 1, 'disable': 2.
                                 fltNewCfgAclTcpAck 1.3.6.1.4.1.1872.2.1.10.3.1.27 integer read-write
Enable or disable TCP ACK packet. Enumeration: 'enable': 1, 'disable': 2.
                                 fltNewCfgAclTcpPsh 1.3.6.1.4.1.1872.2.1.10.3.1.28 integer read-write
Enable or disable TCP PSH packet. Enumeration: 'enable': 1, 'disable': 2.
                                 fltNewCfgAclTcpRst 1.3.6.1.4.1.1872.2.1.10.3.1.29 integer read-write
Enable or disable TCP RST packet. Enumeration: 'enable': 1, 'disable': 2.
                                 fltNewCfgAclTcpSyn 1.3.6.1.4.1.1872.2.1.10.3.1.30 integer read-write
Enable or disable TCP SYN packet. Enumeration: 'enable': 1, 'disable': 2.
                                 fltNewCfgAclTcpFin 1.3.6.1.4.1.1872.2.1.10.3.1.31 integer read-write
Enable or disable TCP FIN packet. Enumeration: 'enable': 1, 'disable': 2.
                                 fltNewCfgAclIcmp 1.3.6.1.4.1.1872.2.1.10.3.1.32 integer read-write
ICMP type to be filtered.
                                 fltNewCfgAclIpOption 1.3.6.1.4.1.1872.2.1.10.3.1.33 integer read-write
Select an IP option to filter. Enumeration: 'strict': 5, 'rroute': 2, 'any': 1, 'loose': 4, 'tstamp': 3.
                                 fltNewCfgBwmContract 1.3.6.1.4.1.1872.2.1.10.3.1.34 integer read-write
Filt default BW contract number.
                                 fltNewCfgAclIpTos 1.3.6.1.4.1.1872.2.1.10.3.1.35 integer read-write
The IP TOS value to be filtered.
                                 fltNewCfgAclIpTosMask 1.3.6.1.4.1.1872.2.1.10.3.1.36 integer read-write
The IP TOS mask for filtering.
                                 fltNewCfgAclIpTosNew 1.3.6.1.4.1.1872.2.1.10.3.1.37 integer read-write
The new IP TOS value to over-write when filtering fired.
                                 fltNewCfgFwlb 1.3.6.1.4.1.1872.2.1.10.3.1.38 integer read-write
Enable or disable filtering on firewall redirect hash method. Enumeration: 'disabled': 2, 'enabled': 1.
                         fltCurCfgPortTable 1.3.6.1.4.1.1872.2.1.10.4 no-access
The filtering port table in the current configuration block.
                             fltCurCfgPortTableEntry 1.3.6.1.4.1.1872.2.1.10.4.1 no-access
A row in the filtering port table.
                                 fltCurCfgPortIndx 1.3.6.1.4.1.1872.2.1.10.4.1.1 integer read-only
The port index.
                                 fltCurCfgPortState 1.3.6.1.4.1.1872.2.1.10.4.1.2 integer read-only
Enable or disable filtering. Enumeration: 'disabled': 2, 'enabled': 1.
                                 fltCurCfgPortFiltBmap 1.3.6.1.4.1.1872.2.1.10.4.1.3 octet string read-only
The filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to fltCurCfgTable) where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port
                         fltNewCfgPortTable 1.3.6.1.4.1.1872.2.1.10.5 no-access
The filtering port table in the new configuration block.
                             fltNewCfgPortTableEntry 1.3.6.1.4.1.1872.2.1.10.5.1 no-access
A row in the filtering port table.
                                 fltNewCfgPortIndx 1.3.6.1.4.1.1872.2.1.10.5.1.1 integer read-only
The port index.
                                 fltNewCfgPortState 1.3.6.1.4.1.1872.2.1.10.5.1.2 integer read-write
Enable or disable filtering. Enumeration: 'disabled': 2, 'enabled': 1.
                                 fltNewCfgPortFiltBmap 1.3.6.1.4.1.1872.2.1.10.5.1.3 octet string read-only
The filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to fltNewCfgTable) where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port
                                 fltNewCfgPortAddFiltRule 1.3.6.1.4.1.1872.2.1.10.5.1.4 integer read-write
This is an action object to add filtering rule to a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be added to the port. The range of the valid index is between 1 and fltCurCfgTableMaxSize. When read, the value '0' is returned always.
                                 fltNewCfgPortRemFiltRule 1.3.6.1.4.1.1872.2.1.10.5.1.5 integer read-write
This is an action object to remove filtering rule from a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be removed from the port. The range of the valid index is between 1 and fltCurCfgTableMaxSize. When read, the value '0' is returned always.
                   globalSLB 1.3.6.1.4.1.1872.2.1.11
                         gslbGeneral 1.3.6.1.4.1.1872.2.1.11.1
                             gslbCurCfgGenState 1.3.6.1.4.1.1872.2.1.11.1.1 integer read-only
Trun on or off Distributed Server Load Balance in the current_configuration block. Enumeration: 'on': 1, 'off': 2.
                             gslbNewCfgGenState 1.3.6.1.4.1.1872.2.1.11.1.2 integer read-write
Trun on or off Distributed Server Load Balance in the new_configuration block. Enumeration: 'on': 1, 'off': 2.
                             gslbCurCfgGenDnsHandoff 1.3.6.1.4.1.1872.2.1.11.1.3 integer read-only
Enable/Disable DNS handoffs in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                             gslbNewCfgGenDnsHandoff 1.3.6.1.4.1.1872.2.1.11.1.4 integer read-write
Enable/Disable DNS handoffs in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                             gslbCurCfgGenDnsTTL 1.3.6.1.4.1.1872.2.1.11.1.5 integer read-only
Time to live value in minute of DNS resource records in the current_configuration block.
                             gslbNewCfgGenDnsTTL 1.3.6.1.4.1.1872.2.1.11.1.6 integer read-write
Time to live value in minute of DNS resource records in the new_configuration block.
                             gslbCurCfgGenHttpRedirect 1.3.6.1.4.1.1872.2.1.11.1.7 integer read-only
Enable/Disable DNS handoffs in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                             gslbNewCfgGenHttpRedirect 1.3.6.1.4.1.1872.2.1.11.1.8 integer read-write
Enable/Disable DNS handoffs in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                             gslbCurCfgGenRemSiteUpdateInterval 1.3.6.1.4.1.1872.2.1.11.1.9 integer read-only
The time interval in minute for updating remote site status in the current_configuration block.
                             gslbNewCfgGenRemSiteUpdateInterval 1.3.6.1.4.1.1872.2.1.11.1.10 integer read-write
The time interval in minute for updating remote site status in the new_configuration block.
                             gslbCurCfgGenDnsLocalPref 1.3.6.1.4.1.1872.2.1.11.1.11 integer read-only
Enable/Disable DNS responses with only local addresses. Enumeration: 'disabled': 2, 'enabled': 1.
                             gslbNewCfgGenDnsLocalPref 1.3.6.1.4.1.1872.2.1.11.1.12 integer read-write
Enable/Disable DNS responses with only local addresses. Enumeration: 'disabled': 2, 'enabled': 1.
                             gslbCurCfgGenMinco 1.3.6.1.4.1.1872.2.1.11.1.13 integer read-only
Minmum number of site connections in the current_configuration block.
                             gslbNewCfgGenMinco 1.3.6.1.4.1.1872.2.1.11.1.14 integer read-write
Minmum number of site connections in the new_configuration block.
                             gslbCurCfgGenOne 1.3.6.1.4.1.1872.2.1.11.1.15 integer read-only
Enable/Disable DNS responses with only one address in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                             gslbNewCfgGenOne 1.3.6.1.4.1.1872.2.1.11.1.16 integer read-write
Enable/Disable DNS responses with only one address in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                             gslbCurCfgGenUsern 1.3.6.1.4.1.1872.2.1.11.1.17 integer read-only
Enable/Disable HTTP redirect to real server name in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                             gslbNewCfgGenUsern 1.3.6.1.4.1.1872.2.1.11.1.18 integer read-write
Enable/Disable HTTP redirect to real server name in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                             gslbCurCfgGenGeo 1.3.6.1.4.1.1872.2.1.11.1.19 integer read-only
Enable/Disable geographic awareness in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                             gslbNewCfgGenGeo 1.3.6.1.4.1.1872.2.1.11.1.20 integer read-write
Enable/Disable geographic awareness in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                         gslbDNS 1.3.6.1.4.1.1872.2.1.11.2
                             dnsCurCfgPrimaryIpAddr 1.3.6.1.4.1.1872.2.1.11.2.1 ipaddress read-only
The DNS primary IP address in the current_configuration block.
                             dnsNewCfgPrimaryIpAddr 1.3.6.1.4.1.1872.2.1.11.2.2 ipaddress read-write
The DNS primary IP address in the new_configuration block.
                             dnsCurCfgSecondaryIpAddr 1.3.6.1.4.1.1872.2.1.11.2.3 ipaddress read-only
The DNS primary IP address in the current_configuration block.
                             dnsNewCfgSecondaryIpAddr 1.3.6.1.4.1.1872.2.1.11.2.4 ipaddress read-write
The DNS primary IP address in the new_configuration block.
                             dnsCurCfgDomainName 1.3.6.1.4.1.1872.2.1.11.2.5 displaystring read-only
The DNS doamin name in the current_configuration block.
                             dnsNewCfgDomainName 1.3.6.1.4.1.1872.2.1.11.2.6 displaystring read-write
The DNS doamin name in the new_configuration block.
                         gslbSites 1.3.6.1.4.1.1872.2.1.11.3
                             gslbRemSiteTableMaxSize 1.3.6.1.4.1.1872.2.1.11.3.1 integer read-only
The maximum number of GSLB remote sites.
                             gslbCurCfgRemSiteTable 1.3.6.1.4.1.1872.2.1.11.3.2 no-access
The GSLB remote sites table in the current configuration block.
                                 gslbCurCfgRemSiteTableEntry 1.3.6.1.4.1.1872.2.1.11.3.2.1 no-access
A row in the GSLB remote sites table.
                                     gslbCurCfgRemSiteIndx 1.3.6.1.4.1.1872.2.1.11.3.2.1.1 integer read-only
The GSLB remote sites table index.
                                     gslbCurCfgRemSitePrimaryIp 1.3.6.1.4.1.1872.2.1.11.3.2.1.2 ipaddress read-only
The primary IP address of the remote site in the current_configuration block.
                                     gslbCurCfgRemSiteSecondaryIp 1.3.6.1.4.1.1872.2.1.11.3.2.1.3 ipaddress read-only
The secondary IP address of the remote site in the current_configuration block.
                                     gslbCurCfgRemSiteState 1.3.6.1.4.1.1872.2.1.11.3.2.1.4 integer read-only
Enable/Disable GSLB for the remote site in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                                     gslbCurCfgRemSiteUpdate 1.3.6.1.4.1.1872.2.1.11.3.2.1.5 integer read-only
Enable/Disable GSLB for the remote site status update in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                             gslbNewCfgRemSiteTable 1.3.6.1.4.1.1872.2.1.11.3.3 no-access
The GSLB remote sites table in the current configuration block.
                                 gslbNewCfgRemSiteTableEntry 1.3.6.1.4.1.1872.2.1.11.3.3.1 no-access
A row in the GSLB remote sites table.
                                     gslbNewCfgRemSiteIndx 1.3.6.1.4.1.1872.2.1.11.3.3.1.1 integer read-only
The GSLB remote sites table index.
                                     gslbNewCfgRemSitePrimaryIp 1.3.6.1.4.1.1872.2.1.11.3.3.1.2 ipaddress read-write
The primary IP address of the remote site in the new_configuration block.
                                     gslbNewCfgRemSiteSecondaryIp 1.3.6.1.4.1.1872.2.1.11.3.3.1.3 ipaddress read-write
The secondary IP address of the remote site in the new_configuration block.
                                     gslbNewCfgRemSiteState 1.3.6.1.4.1.1872.2.1.11.3.3.1.4 integer read-write
Enable/Disable GSLB for the remote site in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                                     gslbNewCfgRemSiteUpdate 1.3.6.1.4.1.1872.2.1.11.3.3.1.5 integer read-write
Enable/Disable GSLB for the remote site status update in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                         gslbLookup 1.3.6.1.4.1.1872.2.1.11.4
                             gslbCurCfgGenLookups 1.3.6.1.4.1.1872.2.1.11.4.1 integer read-only
Enable or disable network preference lookups. Enumeration: 'disabled': 2, 'enabled': 1.
                             gslbNewCfgGenLookups 1.3.6.1.4.1.1872.2.1.11.4.2 integer read-write
Enable or disable network preference lookups. Enumeration: 'disabled': 2, 'enabled': 1.
                             gslbCurCfgGenLookupDname 1.3.6.1.4.1.1872.2.1.11.4.3 displaystring read-only
Domain name for internal lookup table
                             gslbNewCfgGenLookupDname 1.3.6.1.4.1.1872.2.1.11.4.4 displaystring read-write
Domain name for internal lookup table
                             gslbNetwork 1.3.6.1.4.1.1872.2.1.11.4.5
                                 gslbNetworkTableMaxSize 1.3.6.1.4.1.1872.2.1.11.4.5.1 integer read-only
The maximum number of GSLB Internet network preference entries.
                                 gslbCurCfgNetworkTable 1.3.6.1.4.1.1872.2.1.11.4.5.2 no-access
The table of Internet network preference configuration in the current_config.
                                     gslbCurCfgNetworkTableEntry 1.3.6.1.4.1.1872.2.1.11.4.5.2.1 no-access
The table about a network preference entry configuration.
                                         gslbCurCfgNetworkIndx 1.3.6.1.4.1.1872.2.1.11.4.5.2.1.1 integer read-only
The current Internet network preference table index.
                                         gslbCurCfgNetworkSourceIp 1.3.6.1.4.1.1872.2.1.11.4.5.2.1.2 ipaddress read-only
The Source IP address of the network table.
                                         gslbCurCfgNetworkNetMask 1.3.6.1.4.1.1872.2.1.11.4.5.2.1.3 ipaddress read-only
The Net mask of the network table.
                                         gslbCurCfgNetworkVip1 1.3.6.1.4.1.1872.2.1.11.4.5.2.1.4 ipaddress read-only
The Vip1 of the network table.
                                         gslbCurCfgNetworkVip2 1.3.6.1.4.1.1872.2.1.11.4.5.2.1.5 ipaddress read-only
The Vip2 of the network table.
                                 gslbNewCfgNetworkTable 1.3.6.1.4.1.1872.2.1.11.4.5.3 no-access
The table of Internet network preference configuration in the new_config.
                                     gslbNewCfgNetworkTableEntry 1.3.6.1.4.1.1872.2.1.11.4.5.3.1 no-access
The table about a network preference entry configuration.
                                         gslbNewCfgNetworkIndx 1.3.6.1.4.1.1872.2.1.11.4.5.3.1.1 integer read-only
The new Internet network preference table index.
                                         gslbNewCfgNetworkSourceIp 1.3.6.1.4.1.1872.2.1.11.4.5.3.1.2 ipaddress read-write
The Source IP address of the network table.
                                         gslbNewCfgNetworkNetMask 1.3.6.1.4.1.1872.2.1.11.4.5.3.1.3 ipaddress read-write
The Net mask of the network table.
                                         gslbNewCfgNetworkVip1 1.3.6.1.4.1.1872.2.1.11.4.5.3.1.4 ipaddress read-write
The Vip1 of the network table.
                                         gslbNewCfgNetworkVip2 1.3.6.1.4.1.1872.2.1.11.4.5.3.1.5 ipaddress read-write
The Vip2 of the network table.
                                         gslbNewCfgNetworkDelete 1.3.6.1.4.1.1872.2.1.11.4.5.3.1.12 integer read-write
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
                             gslbCurCfgGenExternal 1.3.6.1.4.1.1872.2.1.11.4.6 integer read-only
Enable or disable external lookups. Enumeration: 'disabled': 2, 'enabled': 1.
                             gslbNewCfgGenExternal 1.3.6.1.4.1.1872.2.1.11.4.7 integer read-write
Enable or disable external lookups. Enumeration: 'disabled': 2, 'enabled': 1.
                             gslbCurCfgGenEip 1.3.6.1.4.1.1872.2.1.11.4.8 ipaddress read-only
External lookup IP address
                             gslbNewCfgGenEip 1.3.6.1.4.1.1872.2.1.11.4.9 ipaddress read-write
External lookup IP address
                             gslbCurCfgGenLookupPort 1.3.6.1.4.1.1872.2.1.11.4.10 integer read-only
External lookup UDP port number
                             gslbNewCfgGenLookupPort 1.3.6.1.4.1.1872.2.1.11.4.11 integer read-write
External lookup UDP port number
                             gslbCurCfgGenLookupTimeout 1.3.6.1.4.1.1872.2.1.11.4.12 integer read-only
External lookup Timeout Interval
                             gslbNewCfgGenLookupTimeout 1.3.6.1.4.1.1872.2.1.11.4.13 integer read-write
External lookup Timeout Interval
                   dynamicSLB 1.3.6.1.4.1.1872.2.1.12
                         dynSLBRealServerTable 1.3.6.1.4.1.1872.2.1.12.1 no-access
The table of Real Servers.
                             dynSLBRealServerEntry 1.3.6.1.4.1.1872.2.1.12.1.1 no-access
A row in the Real Server table.
                                 dynSLBRealServerIpAddr 1.3.6.1.4.1.1872.2.1.12.1.1.1 ipaddress read-only
IP address of the Real Server.
                                 dynSLBRealServerPortNum 1.3.6.1.4.1.1872.2.1.12.1.1.2 integer read-only
The switch port that the Real Server is connected to.
                                 dynSLBRealServerWeight 1.3.6.1.4.1.1872.2.1.12.1.1.3 integer read-write
The Real Server weight. The higher the server weight means the Real Server is allowed to receive more traffic load.
                   altswitchTraps 1.3.6.1.4.1.1872.2.1.13
                   operCmds 1.3.6.1.4.1.1872.2.1.14
                         operSlbPortTable 1.3.6.1.4.1.1872.2.1.14.1 no-access
The table of ports that the Oper commands apply to.
                             operSlbPortEntry 1.3.6.1.4.1.1872.2.1.14.1.1 no-access
A row in the operSlbPortTable
                                 operSlbPortIndex 1.3.6.1.4.1.1872.2.1.14.1.1.1 integer read-only
The switch port number.
                                 operSlbPortClrSessionTab 1.3.6.1.4.1.1872.2.1.14.1.1.2 integer read-only
This an action object to clear session buinding table for the specified port. ok(1) is returned when read. Enumeration: 'clear': 2, 'ok': 1.
                   vrrp 1.3.6.1.4.1.1872.2.1.15
                         vrrpGeneral 1.3.6.1.4.1.1872.2.1.15.1
                             vrrpCurCfgGenState 1.3.6.1.4.1.1872.2.1.15.1.1 integer read-only
Enable or disable VRRP operation globally. Enumeration: 'disabled': 2, 'enabled': 1.
                             vrrpNewCfgGenState 1.3.6.1.4.1.1872.2.1.15.1.2 integer read-write
Enable or disable VRRP operation globally. Enumeration: 'disabled': 2, 'enabled': 1.
                             vrrpCurCfgGenTckVirtRtrInc 1.3.6.1.4.1.1872.2.1.15.1.3 integer read-only
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers.
                             vrrpNewCfgGenTckVirtRtrInc 1.3.6.1.4.1.1872.2.1.15.1.4 integer read-write
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers.
                             vrrpCurCfgGenTckIpIntfInc 1.3.6.1.4.1.1872.2.1.15.1.5 integer read-only
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces.
                             vrrpNewCfgGenTckIpIntfInc 1.3.6.1.4.1.1872.2.1.15.1.6 integer read-write
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces.
                             vrrpCurCfgGenTckVlanPortInc 1.3.6.1.4.1.1872.2.1.15.1.7 integer read-only
The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router.
                             vrrpNewCfgGenTckVlanPortInc 1.3.6.1.4.1.1872.2.1.15.1.8 integer read-write
The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router.
                             vrrpCurCfgGenTckL4PortInc 1.3.6.1.4.1.1872.2.1.15.1.9 integer read-only
The increment of VRRP virtual router priority. The priority is adjusted by tracking the Layer 4 port states. This is valid when virtual server is configured as a VRRP virtual router.
                             vrrpNewCfgGenTckL4PortInc 1.3.6.1.4.1.1872.2.1.15.1.10 integer read-write
The increment of VRRP virtual router priority. The priority is adjusted by tracking the Layer 4 port states. This is valid when virtual server is configured as a VRRP virtual router.
                             vrrpCurCfgGenTckRServerInc 1.3.6.1.4.1.1872.2.1.15.1.11 integer read-only
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of real servers under the virtual server which is configured as a VRRP virtual router.
                             vrrpNewCfgGenTckRServerInc 1.3.6.1.4.1.1872.2.1.15.1.12 integer read-write
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of real servers under the virtual server which is configured as a VRRP virtual router.
                             vrrpCurCfgGenTckHsrpInc 1.3.6.1.4.1.1872.2.1.15.1.13 integer read-only
The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements.
                             vrrpNewCfgGenTckHsrpInc 1.3.6.1.4.1.1872.2.1.15.1.14 integer read-write
The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements.
                             vrrpCurCfgGenHotstandby 1.3.6.1.4.1.1872.2.1.15.1.15 integer read-only
Enable or disable hotstandby processing. Enumeration: 'disabled': 2, 'enabled': 1.
                             vrrpNewCfgGenHotstandby 1.3.6.1.4.1.1872.2.1.15.1.16 integer read-write
Enable or disable hotstandby processing. Enumeration: 'disabled': 2, 'enabled': 1.
                         vrrpCurCfgVirtRtrTable 1.3.6.1.4.1.1872.2.1.15.2 no-access
The table of VRRP virtual routers configuration in current_config.
                             vrrpCurCfgVirtRtrTableEntry 1.3.6.1.4.1.1872.2.1.15.2.1 no-access
Information about a VRRP virtual router.
                                 vrrpCurCfgVirtRtrIndx 1.3.6.1.4.1.1872.2.1.15.2.1.1 integer read-only
The VRRP virtual router table index.
                                 vrrpCurCfgVirtRtrID 1.3.6.1.4.1.1872.2.1.15.2.1.2 integer read-only
The VRRP virtual router identifier.
                                 vrrpCurCfgVirtRtrAddr 1.3.6.1.4.1.1872.2.1.15.2.1.3 ipaddress read-only
The VRRP virtual router IP address.
                                 vrrpCurCfgVirtRtrIfIndex 1.3.6.1.4.1.1872.2.1.15.2.1.4 integer read-only
The IfIndex that the VRRP virtual router is representing.
                                 vrrpCurCfgVirtRtrInterval 1.3.6.1.4.1.1872.2.1.15.2.1.5 integer read-only
The time interval between VRRP advertisements in seconds.
                                 vrrpCurCfgVirtRtrPriority 1.3.6.1.4.1.1872.2.1.15.2.1.6 integer read-only
The priority value to be used by the specified VRRP virtual routers.
                                 vrrpCurCfgVirtRtrPreempt 1.3.6.1.4.1.1872.2.1.15.2.1.7 integer read-only
This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpCurCfgVirtRtrState 1.3.6.1.4.1.1872.2.1.15.2.1.8 integer read-only
Enable or disable the VRRP virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpCurCfgVirtRtrSharing 1.3.6.1.4.1.1872.2.1.15.2.1.9 integer read-only
Enable or disable load sharing of non-master virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpCurCfgVirtRtrTckVirtRtr 1.3.6.1.4.1.1872.2.1.15.2.1.10 integer read-only
Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVirtRtrInc. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpCurCfgVirtRtrTckIpIntf 1.3.6.1.4.1.1872.2.1.15.2.1.11 integer read-only
Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckIpIntfInc. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpCurCfgVirtRtrTckVlanPort 1.3.6.1.4.1.1872.2.1.15.2.1.12 integer read-only
Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVlanPortInc. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpCurCfgVirtRtrTckL4Port 1.3.6.1.4.1.1872.2.1.15.2.1.13 integer read-only
Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpCurCfgVirtRtrTckRServer 1.3.6.1.4.1.1872.2.1.15.2.1.14 integer read-only
Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpCurCfgVirtRtrTckHsrp 1.3.6.1.4.1.1872.2.1.15.2.1.15 integer read-only
Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                         vrrpNewCfgVirtRtrTable 1.3.6.1.4.1.1872.2.1.15.3 no-access
The table of VRRP virtual routers configuration in current_config.
                             vrrpNewCfgVirtRtrTableEntry 1.3.6.1.4.1.1872.2.1.15.3.1 no-access
Information about a VRRP virtual router.
                                 vrrpNewCfgVirtRtrIndx 1.3.6.1.4.1.1872.2.1.15.3.1.1 integer read-only
The VRRP virtual router table index.
                                 vrrpNewCfgVirtRtrID 1.3.6.1.4.1.1872.2.1.15.3.1.2 integer read-write
The VRRP virtual router identifier.
                                 vrrpNewCfgVirtRtrAddr 1.3.6.1.4.1.1872.2.1.15.3.1.3 ipaddress read-write
The VRRP virtual router IP address.
                                 vrrpNewCfgVirtRtrIfIndex 1.3.6.1.4.1.1872.2.1.15.3.1.4 integer read-write
The IfIndex that the VRRP virtual router is representing.
                                 vrrpNewCfgVirtRtrInterval 1.3.6.1.4.1.1872.2.1.15.3.1.5 integer read-write
The time interval between VRRP advertisements in seconds.
                                 vrrpNewCfgVirtRtrPriority 1.3.6.1.4.1.1872.2.1.15.3.1.6 integer read-write
The priority value to be used by the specified VRRP virtual router.
                                 vrrpNewCfgVirtRtrPreempt 1.3.6.1.4.1.1872.2.1.15.3.1.7 integer read-write
This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpNewCfgVirtRtrState 1.3.6.1.4.1.1872.2.1.15.3.1.8 integer read-write
Enable or disable the VRRP virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpNewCfgVirtRtrDelete 1.3.6.1.4.1.1872.2.1.15.3.1.9 integer read-write
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                                 vrrpNewCfgVirtRtrSharing 1.3.6.1.4.1.1872.2.1.15.3.1.10 integer read-write
Enable or disable load sharing of non-master virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpNewCfgVirtRtrTckVirtRtr 1.3.6.1.4.1.1872.2.1.15.3.1.11 integer read-write
Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpNewCfgVirtRtrTckIpIntf 1.3.6.1.4.1.1872.2.1.15.3.1.12 integer read-write
Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpNewCfgVirtRtrTckVlanPort 1.3.6.1.4.1.1872.2.1.15.3.1.13 integer read-write
Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpNewCfgVirtRtrTckL4Port 1.3.6.1.4.1.1872.2.1.15.3.1.14 integer read-write
Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpNewCfgVirtRtrTckRServer 1.3.6.1.4.1.1872.2.1.15.3.1.15 integer read-write
Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpNewCfgVirtRtrTckHsrp 1.3.6.1.4.1.1872.2.1.15.3.1.16 integer read-write
Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                         vrrpCurCfgIfTable 1.3.6.1.4.1.1872.2.1.15.4 no-access
The table of VRRP interface configuration in current_config.
                             vrrpCurCfgIfTableEntry 1.3.6.1.4.1.1872.2.1.15.4.1 no-access
Information about a VRRP interface.
                                 vrrpCurCfgIfIndx 1.3.6.1.4.1.1872.2.1.15.4.1.1 integer read-only
The VRRP interface index. This is eqivalent to IfIndex.
                                 vrrpCurCfgIfAuthType 1.3.6.1.4.1.1872.2.1.15.4.1.2 integer read-only
Type of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpCurCfgIfPasswd for authentication. Enumeration: 'simple-text-password': 2, 'none': 1.
                                 vrrpCurCfgIfPasswd 1.3.6.1.4.1.1872.2.1.15.4.1.3 displaystring read-only
The password for authentication.
                         vrrpNewCfgIfTable 1.3.6.1.4.1.1872.2.1.15.5 no-access
The table of VRRP interface configuration in current_config.
                             vrrpNewCfgIfTableEntry 1.3.6.1.4.1.1872.2.1.15.5.1 no-access
Information about a VRRP interface.
                                 vrrpNewCfgIfIndx 1.3.6.1.4.1.1872.2.1.15.5.1.1 integer read-only
The VRRP interface index. This is eqivalent to IfIndex.
                                 vrrpNewCfgIfAuthType 1.3.6.1.4.1.1872.2.1.15.5.1.2 integer read-write
Type of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpNewCfgIfPasswd for authentication. Enumeration: 'simple-text-password': 2, 'none': 1.
                                 vrrpNewCfgIfPasswd 1.3.6.1.4.1.1872.2.1.15.5.1.3 displaystring read-write
The password for authentication.
                                 vrrpNewCfgIfDelete 1.3.6.1.4.1.1872.2.1.15.5.1.4 integer read-write
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                         vrrpCurCfgVirtRtrGrpTable 1.3.6.1.4.1.1872.2.1.15.6 no-access
The table of VRRP virtual router group configuration in current_config.
                             vrrpCurCfgVirtRtrGrpTableEntry 1.3.6.1.4.1.1872.2.1.15.6.1 no-access
Information about a VRRP failover virtual router.
                                 vrrpCurCfgVirtRtrGrpIndx 1.3.6.1.4.1.1872.2.1.15.6.1.1 integer read-only
The VRRP virtual router table index.
                                 vrrpCurCfgVirtRtrGrpID 1.3.6.1.4.1.1872.2.1.15.6.1.2 integer read-only
The VRRP virtual router identifier.
                                 vrrpCurCfgVirtRtrGrpIfIndex 1.3.6.1.4.1.1872.2.1.15.6.1.3 integer read-only
The IfIndex that the VRRP virtual router is representing.
                                 vrrpCurCfgVirtRtrGrpInterval 1.3.6.1.4.1.1872.2.1.15.6.1.4 integer read-only
The time interval between VRRP advertisements in seconds.
                                 vrrpCurCfgVirtRtrGrpPriority 1.3.6.1.4.1.1872.2.1.15.6.1.5 integer read-only
The priority value to be used by the specified VRRP virtual routers.
                                 vrrpCurCfgVirtRtrGrpPreempt 1.3.6.1.4.1.1872.2.1.15.6.1.6 integer read-only
This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpCurCfgVirtRtrGrpState 1.3.6.1.4.1.1872.2.1.15.6.1.7 integer read-only
Enable or disable the VRRP virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpCurCfgVirtRtrGrpSharing 1.3.6.1.4.1.1872.2.1.15.6.1.8 integer read-only
Enable or disable load sharing of non-master virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpCurCfgVirtRtrGrpTckVirtRtr 1.3.6.1.4.1.1872.2.1.15.6.1.9 integer read-only
Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVirtRtrInc. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpCurCfgVirtRtrGrpTckIpIntf 1.3.6.1.4.1.1872.2.1.15.6.1.10 integer read-only
Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckIpIntfInc. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpCurCfgVirtRtrGrpTckVlanPort 1.3.6.1.4.1.1872.2.1.15.6.1.11 integer read-only
Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVlanPortInc. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpCurCfgVirtRtrGrpTckL4Port 1.3.6.1.4.1.1872.2.1.15.6.1.12 integer read-only
Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpCurCfgVirtRtrGrpTckRServer 1.3.6.1.4.1.1872.2.1.15.6.1.13 integer read-only
Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpCurCfgVirtRtrGrpTckHsrp 1.3.6.1.4.1.1872.2.1.15.6.1.14 integer read-only
Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                         vrrpNewCfgVirtRtrGrpTable 1.3.6.1.4.1.1872.2.1.15.7 no-access
The table of VRRP virtual router group configuration in new_config.
                             vrrpNewCfgVirtRtrGrpTableEntry 1.3.6.1.4.1.1872.2.1.15.7.1 no-access
Information about a VRRP failover virtual router.
                                 vrrpNewCfgVirtRtrGrpIndx 1.3.6.1.4.1.1872.2.1.15.7.1.1 integer read-only
The VRRP virtual router table index.
                                 vrrpNewCfgVirtRtrGrpID 1.3.6.1.4.1.1872.2.1.15.7.1.2 integer read-write
The VRRP virtual router identifier.
                                 vrrpNewCfgVirtRtrGrpIfIndex 1.3.6.1.4.1.1872.2.1.15.7.1.3 integer read-write
The IfIndex that the VRRP virtual router is representing.
                                 vrrpNewCfgVirtRtrGrpInterval 1.3.6.1.4.1.1872.2.1.15.7.1.4 integer read-write
The time interval between VRRP advertisements in seconds.
                                 vrrpNewCfgVirtRtrGrpPriority 1.3.6.1.4.1.1872.2.1.15.7.1.5 integer read-write
The priority value to be used by the specified VRRP virtual router.
                                 vrrpNewCfgVirtRtrGrpPreempt 1.3.6.1.4.1.1872.2.1.15.7.1.6 integer read-write
This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpNewCfgVirtRtrGrpState 1.3.6.1.4.1.1872.2.1.15.7.1.7 integer read-write
Enable or disable the VRRP virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpNewCfgVirtRtrGrpDelete 1.3.6.1.4.1.1872.2.1.15.7.1.8 integer read-write
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                                 vrrpNewCfgVirtRtrGrpSharing 1.3.6.1.4.1.1872.2.1.15.7.1.9 integer read-write
Enable or disable load sharing of non-master virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpNewCfgVirtRtrGrpTckVirtRtr 1.3.6.1.4.1.1872.2.1.15.7.1.10 integer read-write
Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpNewCfgVirtRtrGrpTckIpIntf 1.3.6.1.4.1.1872.2.1.15.7.1.11 integer read-write
Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpNewCfgVirtRtrGrpTckVlanPort 1.3.6.1.4.1.1872.2.1.15.7.1.12 integer read-write
Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpNewCfgVirtRtrGrpTckL4Port 1.3.6.1.4.1.1872.2.1.15.7.1.13 integer read-write
Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpNewCfgVirtRtrGrpTckRServer 1.3.6.1.4.1.1872.2.1.15.7.1.14 integer read-write
Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                                 vrrpNewCfgVirtRtrGrpTckHsrp 1.3.6.1.4.1.1872.2.1.15.7.1.15 integer read-write
Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                   radius 1.3.6.1.4.1.1872.2.1.16
                         radCurCfgPrimaryIpAddr 1.3.6.1.4.1.1872.2.1.16.1 ipaddress read-only
The IP address of the Primary RADIUS server.
                         radNewCfgPrimaryIpAddr 1.3.6.1.4.1.1872.2.1.16.2 ipaddress read-write
The IP address of the Primary RADIUS server.
                         radCurCfgSecondaryIpAddr 1.3.6.1.4.1.1872.2.1.16.3 ipaddress read-only
The IP address of the Secondary RADIUS server.
                         radNewCfgSecondaryIpAddr 1.3.6.1.4.1.1872.2.1.16.4 ipaddress read-write
The IP address of the Secondary RADIUS server.
                         radCurCfgPort 1.3.6.1.4.1.1872.2.1.16.5 integer read-only
Specify the RADIUS port number.
                         radNewCfgPort 1.3.6.1.4.1.1872.2.1.16.6 integer read-write
Speicfy the RADIUS port number.
                         radCurCfgTimeout 1.3.6.1.4.1.1872.2.1.16.7 integer read-only
The maximum number of seconds before resending authentication to RADIUS server.
                         radNewCfgTimeout 1.3.6.1.4.1.1872.2.1.16.8 integer read-write
The maximum number of seconds before resending authentication to RADIUS server.
                         radCurCfgRetries 1.3.6.1.4.1.1872.2.1.16.9 integer read-only
Number of retries to the RADIUS server.
                         radNewCfgRetries 1.3.6.1.4.1.1872.2.1.16.10 integer read-write
Number of retries to the RADIUS server.
                         radCurCfgState 1.3.6.1.4.1.1872.2.1.16.11 integer read-only
Enable or disbale RADIUS authentication. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                         radNewCfgState 1.3.6.1.4.1.1872.2.1.16.12 integer read-write
Enable or disable RADIUS authentication. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                         radCurCfgAuthenString 1.3.6.1.4.1.1872.2.1.16.13 displaystring read-only
The RADIUS authentication string.
                         radNewCfgAuthenString 1.3.6.1.4.1.1872.2.1.16.14 displaystring read-write
The RADIUS authentication string.
                   bwm 1.3.6.1.4.1.1872.2.1.17
                         bwmGeneralConfig 1.3.6.1.4.1.1872.2.1.17.1
                             bwmCurCfgGenState 1.3.6.1.4.1.1872.2.1.17.1.1 integer read-only
The state of BWM in the current configuration block. Enumeration: 'on': 2, 'other': 1, 'off': 3.
                             bwmNewCfgGenState 1.3.6.1.4.1.1872.2.1.17.1.2 integer read-write
The state of BWM in the new configuration block. Enumeration: 'on': 2, 'other': 1, 'off': 3.
                             bwmCurCfgGenEnforcePolicy 1.3.6.1.4.1.1872.2.1.17.1.3 integer read-only
The state of BWM enforce policy in the current configuration block. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                             bwmNewCfgGenEnforcePolicy 1.3.6.1.4.1.1872.2.1.17.1.4 integer read-write
The state of BWM enforce policy in the new configuration block. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                             bwmCurCfgGenSmtpUser 1.3.6.1.4.1.1872.2.1.17.1.5 displaystring read-only
The SMTP user name for BWM in the current configuration block.
                             bwmNewCfgGenSmtpUser 1.3.6.1.4.1.1872.2.1.17.1.6 displaystring read-write
The SMTP user name for BWM in the new configuration block.
                         bwmPolicyConfig 1.3.6.1.4.1.1872.2.1.17.2
                             bwmPolicyTableMaxEnt 1.3.6.1.4.1.1872.2.1.17.2.1 integer read-only
The maximum number of rows in the BWM policy configuration table.
                             bwmCurCfgPolicyTable 1.3.6.1.4.1.1872.2.1.17.2.2 no-access
The table of BWM traffic policy configuration in the current_configuration block.
                                 bwmCurCfgPolicyTableEntry 1.3.6.1.4.1.1872.2.1.17.2.2.1 no-access
A row in the BWM traffic policy configuration table in the current_configuration block.
                                     bwmCurCfgPolicyIndx 1.3.6.1.4.1.1872.2.1.17.2.2.1.1 integer read-only
The index of the row in BWM traffic policy configurations table.
                                     bwmCurCfgPolicyTosIn 1.3.6.1.4.1.1872.2.1.17.2.2.1.2 integer read-only
This is IP TOS in the profile state of the traffic policy
                                     bwmCurCfgPolicyTosOut 1.3.6.1.4.1.1872.2.1.17.2.2.1.3 integer read-only
This is IP TOS out of profile state of the traffic policy
                                     bwmCurCfgPolicyHard 1.3.6.1.4.1.1872.2.1.17.2.2.1.4 displaystring read-only
The hard speed limit for the traffic policy.
                                     bwmCurCfgPolicySoft 1.3.6.1.4.1.1872.2.1.17.2.2.1.5 displaystring read-only
The soft speed limit for the traffic policy.
                                     bwmCurCfgPolicyResv 1.3.6.1.4.1.1872.2.1.17.2.2.1.6 displaystring read-only
The reservation speed limit for the traffic policy.
                                     bwmCurCfgPolicyBuffer 1.3.6.1.4.1.1872.2.1.17.2.2.1.7 integer read-only
The buffer limit for the traffic policy.
                             bwmNewCfgPolicyTable 1.3.6.1.4.1.1872.2.1.17.2.3 no-access
The table of BWM traffi policy configuration in the current_configuration block.
                                 bwmNewCfgPolicyTableEntry 1.3.6.1.4.1.1872.2.1.17.2.3.1 no-access
A row in the BWM traffic policy configuration table in the current_configuration block.
                                     bwmNewCfgPolicyIndx 1.3.6.1.4.1.1872.2.1.17.2.3.1.1 integer read-only
The index of the row in BWM traffic policy configurations table.
                                     bwmNewCfgPolicyTosIn 1.3.6.1.4.1.1872.2.1.17.2.3.1.2 integer read-write
This is IP TOS in the profile state of the traffic policy
                                     bwmNewCfgPolicyTosOut 1.3.6.1.4.1.1872.2.1.17.2.3.1.3 integer read-write
This is IP TOS out of profile state of the traffic policy
                                     bwmNewCfgPolicyHard 1.3.6.1.4.1.1872.2.1.17.2.3.1.4 displaystring read-write
The hard speed limit for the traffic policy.
                                     bwmNewCfgPolicySoft 1.3.6.1.4.1.1872.2.1.17.2.3.1.5 displaystring read-write
The soft speed limit for the traffic policy.
                                     bwmNewCfgPolicyResv 1.3.6.1.4.1.1872.2.1.17.2.3.1.6 displaystring read-write
The reservation speed limit for the traffic policy.
                                     bwmNewCfgPolicyBuffer 1.3.6.1.4.1.1872.2.1.17.2.3.1.7 integer read-write
The buffer limit for the traffic policy.
                         bwmContractConfig 1.3.6.1.4.1.1872.2.1.17.3
                             bwmContractTableMaxEnt 1.3.6.1.4.1.1872.2.1.17.3.1 integer read-only
The maximum number of rows in the BWM contract configuration table.
                             bwmCurCfgContractTable 1.3.6.1.4.1.1872.2.1.17.3.2 no-access
The table of BWM traffic contract configuration in the current_configuration block.
                                 bwmCurCfgContractTableEntry 1.3.6.1.4.1.1872.2.1.17.3.2.1 no-access
A row in the BWM traffic contract configuration table in the current_configuration block.
                                     bwmCurCfgContractIndx 1.3.6.1.4.1.1872.2.1.17.3.2.1.1 integer read-only
The index of the row in BWM traffic contract configurations table.
                                     bwmCurCfgContractName 1.3.6.1.4.1.1872.2.1.17.3.2.1.2 displaystring read-only
The traffic contract name.
                                     bwmCurCfgContractState 1.3.6.1.4.1.1872.2.1.17.3.2.1.3 integer read-only
This is the state of the traffic contract. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                                     bwmCurCfgContractPolicy 1.3.6.1.4.1.1872.2.1.17.3.2.1.4 integer read-only
This is policy number of the traffic contract
                                     bwmCurCfgContractPrec 1.3.6.1.4.1.1872.2.1.17.3.2.1.5 integer read-only
The precedence value of the traffic contract
                                     bwmCurCfgContractUseTos 1.3.6.1.4.1.1872.2.1.17.3.2.1.6 integer read-only
Enable/disable the TOS overwrite of the traffic contract. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                                     bwmCurCfgContractHistory 1.3.6.1.4.1.1872.2.1.17.3.2.1.7 integer read-only
Enable/disable save contract statistics on the TFTP server of the traffic contract. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                             bwmNewCfgContractTable 1.3.6.1.4.1.1872.2.1.17.3.3 no-access
The table of BWM traffic contract configuration in the current_configuration block.
                                 bwmNewCfgContractTableEntry 1.3.6.1.4.1.1872.2.1.17.3.3.1 no-access
A row in the BWM traffic contract configuration table in the current_configuration block.
                                     bwmNewCfgContractIndx 1.3.6.1.4.1.1872.2.1.17.3.3.1.1 integer read-only
The index of the row in BWM traffic contract configurations table.
                                     bwmNewCfgContractName 1.3.6.1.4.1.1872.2.1.17.3.3.1.2 displaystring read-write
The traffic contract name.
                                     bwmNewCfgContractState 1.3.6.1.4.1.1872.2.1.17.3.3.1.3 integer read-write
This is the state of the traffic contract. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                                     bwmNewCfgContractPolicy 1.3.6.1.4.1.1872.2.1.17.3.3.1.4 integer read-write
This is policy number of the traffic contract
                                     bwmNewCfgContractDelete 1.3.6.1.4.1.1872.2.1.17.3.3.1.5 integer read-write
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                                     bwmNewCfgContractPrec 1.3.6.1.4.1.1872.2.1.17.3.3.1.6 integer read-write
The precedence value of the traffic contract
                                     bwmNewCfgContractUseTos 1.3.6.1.4.1.1872.2.1.17.3.3.1.7 integer read-write
Enable/disable the TOS overwrite of the traffic contract. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                                     bwmNewCfgContractHistory 1.3.6.1.4.1.1872.2.1.17.3.3.1.8 integer read-write
Enable/disable save contract statistics on the TFTP server of the traffic contract. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.