ALCATEL-IND1-ROUTEMAP-MIB: View SNMP OID List / Download MIB

VENDOR: ALCATEL


 Home MIB: ALCATEL-IND1-ROUTEMAP-MIB
Download as:   
SNMPv2-CONF, ALCATEL-IND1-BASE, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 alcatelIND1RouteMapMIB 1.3.6.1.4.1.6486.801.1.2.1.10.2.3
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB contains management information for the configuration of IP Route Maps global configuration parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2006 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
     alcatelIND1RouteMapMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1
         alaRouteMapConfig 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1
             alaRouteMapRedistProtoTable 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1 no-access
Protocol based configuration for route redistribution.
                 alaRouteMapRedistProtoEntry 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1 no-access
Identifies the source protocol and Route Map to be matched for route redistribution. If the route matches one of the source protocols Route Maps, and the Route Map is of type permit, then the route will be redistributed to the destination protocol.
                     alaRouteMapRedistSrcProtoId 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.1 integer no-access
The source protocol of the route to be redistributed. Enumeration: 'isis': 10, 'isis6': 11, 'ospf': 5, 'bgp6': 9, 'rip': 4, 'ospfv3': 8, 'bgp': 6, 'other': 1, 'static': 3, 'ripng': 7, 'local': 2.
                     alaRouteMapRedistDestProtoId 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.2 integer no-access
The protocol that a route is distributed into. Enumeration: 'isis': 7, 'bgp6': 6, 'rip': 1, 'ospfv3': 5, 'bgp': 3, 'isis6': 8, 'ripng': 4, 'ospf': 2.
                     alaRouteMapRedistRouteMapIndex 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.3 unsigned32 no-access
Index indicating Route Map to use for redistribution match. In the destroy case the value 0 indicates all route-maps.
                     alaRouteMapRedistStatus 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.4 integer read-only
Enable or disable the reditribution of routes into the specified protocol. Enumeration: 'enable': 1, 'disable': 2.
                     alaRouteMapRedistAddressType 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.5 inetaddresstype read-only
The address family of the source and destination protocols. The set is constrained to ipv4 and ipv6.
                     alaRouteMapRedistRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.6 rowstatus read-only
Controls creation and deletion of Row Status entries.
             alaRouteMapAccessListNameTable 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2 no-access
Table containing Access List name to Access List bindings.
                 alaRouteMapAccessListNameEntry 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2.1 no-access
Each entry binds an Access List Name to an Access List index.
                     alaRouteMapAccessListName 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2.1.1 displaystring no-access
The name of an Access List.
                     alaRouteMapAccessListNameIndex 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2.1.2 unsigned32 read-only
The index associated with the Access List name.
                     alaRouteMapAccessListNameAddressType 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2.1.3 inetaddresstype read-only
The type of address in this Access List. The set is constrained to ipv4 and ipv6.
                     alaRouteMapAccessListNameRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2.1.4 rowstatus read-only
Controls creation and deletion of Row Status entries.
             alaRouteMapAccessListTable 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3 no-access
This table contains all Access Lists configured on the switch.
                 alaRouteMapAccessListEntry 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1 no-access
Each entry identifies an IPv4 or IPv6 address or subnet to match for route redistribution.
                     alaRouteMapAccessListIndex 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.1 unsigned32 no-access
The index associated with the Access List name.
                     alaRouteMapAccessListAddressType 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.2 inetaddresstype no-access
The type of address in this Access List Table Entry. The set is constrained to ipv4 and ipv6.
                     alaRouteMapAccessListAddress 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.3 inetaddress no-access
The IPv4 or IPv6 address associated with this access list entry. The type is identified by alaRouteMapAccessListAddressType.
                     alaRouteMapAccessListPrefixLength 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.4 unsigned32 no-access
The prefix length in bits of the IPv4 or IPv6 address associated with this Access List entry. The maximum for IPv4 is 32.
                     alaRouteMapAccessListRedistControl 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.5 alaroutemapredistcontrol read-only
Controls how a route is matched and redistributed. allSubnets matches all subnets of the prefix. noSubnets only matches the exact prefix. aggregate matches all subnets of the prefix, but only redistributes the prefix.
                     alaRouteMapAccessListAction 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.6 alaroutemapaction read-only
Controls whether an address should be redistributed or denied, if an Access list entry is matched.
                     alaRouteMapAccessListRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.7 rowstatus read-only
Controls creation and deletion of Row Status entries.
             alaRouteMapNameTable 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.4 no-access
Table containing Route Map name to Route Map index bindings.
                 alaRouteMapNameEntry 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.4.1 no-access
Each entry binds a Route Map Name to a Route Map index.
                     alaRouteMapName 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.4.1.1 displaystring no-access
The name of a Route Map.
                     alaRouteMapNameIndex 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.4.1.2 unsigned32 read-only
The index associated with the Route Map name.
                     alaRouteMapNameRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.4.1.3 rowstatus read-only
Controls creation and deletion of Row Status entries.
             alaRouteMapSequenceTable 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5 no-access
Table binds a sequence to a Route Map.
                 alaRouteMapSequenceEntry 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5.1 no-access
Each entry binds a Route Map and a Sequence.
                     alaRouteMapSequenceIndex 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5.1.1 unsigned32 no-access
A Route Map Index.
                     alaRouteMapSequenceNumber 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5.1.2 unsigned32 no-access
The Sequence Number indicating the position of sequences with the same Route Map index.
                     alaRouteMapSequenceAction 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5.1.3 alaroutemapaction read-only
Controls whether a sequence, if matched, should be redistributed or denied.
                     alaRouteMapSequenceRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5.1.4 rowstatus read-only
Controls creation and deletion of Row Status entries.
             alaRouteMapTable 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6 no-access
Protocol based configuration for route redistribution.
                 alaRouteMapEntry 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1 no-access
Each entry describes a match or set clause in a Route Map.
                     alaRouteMapIndex 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1.1 unsigned32 no-access
The index associated with the Route Map name.
                     alaRouteMapSequence 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1.2 unsigned32 no-access
Route Maps are linked together using sequence numbers. All Route Maps with the same index and with different sequence numbers are linked together and processed in order of increasing sequence number.
                     alaRouteMapType 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1.3 alaroutemaptype no-access
The type of match or set command in this entry. Route Map rows with the same Route Map Name, Sequence Number and Match/Set Type form a group. An entry within the group is uniquely identified by this Route Map Table object. Any match within the group is considered a successful match for the entire group, and matching will continue with the next group.
                     alaRouteMapValue 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1.4 displaystring no-access
The string following the match or set keyword in a Route Map CLI command.
                     alaRouteMapRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1.5 rowstatus read-only
Controls creation and deletion of Row Status entries.
     alcatelIND1RouteMapMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.2
         alcatelIND1RouteMapMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.2.1
             alaRouteMapCompliance 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.2.1.1
The compliance statement for routers running Route Maps and implementing the ALCATEL-IND1-ROUTEMAP MIB.
         alcatelIND1RouteMapMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.2.2
             alaRouteMapConfigMIBGroup 1.3.6.1.4.1.6486.801.1.2.1.10.2.3.2.2.1
A collection of objects to support management of global configuration parameters of the Route Map Module.