ALCATEL-IND1-NTP-MIB: View SNMP OID List / Download MIB

VENDOR: ALCATEL


 Home MIB: ALCATEL-IND1-NTP-MIB
Download as:   
SNMPv2-CONF, ALCATEL-IND1-BASE, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 alcatelIND1NTPMIB 1.3.6.1.4.1.6486.801.1.2.1.26.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Propietary NTP MIB definitions The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
     alcatelIND1NTPMIBNotifications 1.3.6.1.4.1.6486.801.1.2.1.26.1.0
Branch For NTP MIB Subsystem Notifications.
         alaNtpMaxAssocTrap 1.3.6.1.4.1.6486.801.1.2.1.26.1.0.1
Notify the management entity on reaching the maximum allowable NTP client and peer associations.
     alcatelIND1NTPMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.26.1.1
Branch For NTP Subsystem Managed Objects.
         alaNtpConfig 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1
             alaNtpEnable 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.1 integer read-write
Enables/disables NTP clock discipline. Enumeration: 'enable': 1, 'disable': 2.
             alaNtpMonitorEnable 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.2 integer read-write
Enables/disables NTP monitor. Enumeration: 'enable': 1, 'disable': 2.
             alaNtpBroadcastEnable 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.3 integer read-write
Enables/disables NTP broadcast client. Enumeration: 'enable': 1, 'disable': 2.
             alaNtpPeerTable 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4 no-access
Table containing the synchronization host this switch will be associated with.
                 alaNtpPeerEntry 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1 no-access
Each entry corresponds to a synchronization host.
                     alaNtpPeerAddressType 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.1 inetaddresstype no-access
The InetAddress type of the synchronization host. Only types InetAddressIPv4 (1) and InetAddressDNS (16) are supported.
                     alaNtpPeerAddress 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.2 inetaddress no-access
The InetAddress of the synchronization host.
                     alaNtpPeerIpAddress 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.3 ipaddress read-only
The IP address of the synchronization host derrived from the InetAddress.
                     alaNtpPeerType 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.4 integer read-only
Type of synchronization host that will communicate with this switch. Enumeration: 'broadcast': 5, 'bclient': 8, 'server': 4, 'passive': 2, 'client': 3, 'active': 1.
                     alaNtpPeerAuth 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.5 integer32 read-only
The authorization keyid for the remote host.
                     alaNtpPeerVersion 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.6 integer32 read-only
The NTP version to communicate with the remote host.
                     alaNtpPeerMinpoll 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.7 integer32 read-only
The minimum poll duration to the remote host. This value is a power of 2 seconds when the poll will occur. For example, 4 (2 to the power 4) is 16 seconds. The maximum poll value is 10.
                     alaNtpPeerPrefer 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.8 integer read-only
Marks the host as a preferred connection. Enumeration: 'prefer': 1, 'noPrefer': 2.
                     alaNtpPeerAdmin 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.9 rowstatus read-only
Used in accordance to installation and removal conventions for conceptual rows. The RowStatus values that are supported are the following: active(1) - The row is active and valid. createAndGo(4) - The row will be created and activated. destroy(6) - The row will be destroyed.
                     alaNtpPeerName 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.10 snmpadminstring read-only
The DNS name for the peer association derrived from the InetAddress.
                     alaNtpPeerStratum 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.11 integer32 read-only
The stratum level of the remote peer. If this number is 16, the remote peer has not been synchronized. This parameter can only be set with a LOCALCLOCK server.
             alaNtpAuthDelay 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.5 integer32 read-write
This field sets a specified time interval that is added to timestamps included in requests to the server that required authentication. Typically this delay is needed in cases of long delay paths, or servers whose clocks are unsynchronized. Value is in milli-seconds
             alaNtpBroadcastDelay 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.6 integer32 read-write
This field sets a specified time interval that is added to timestamps included in messages from broadcast servers. Value is in milli-seconds
             alaNtpKeysFile 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.7 snmpadminstring read-only
Name of the file which has the authorization keys.
             alaNtpConfigReqKeyId 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.8 integer32 read-write
Request messages ask for information from the NTP entity such as timestamp information, statistics, etc. This changes the authentication key identifier for request messages sent from the switch to another NTP entity.
             alaNtpConfigCtlKeyId 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.9 integer32 read-write
Control messages attempt to change the configuration of the NTP entity in some fashion. This changes the authentication key identifier for control messages sent from the switch to another NTP entity.
             alaNtpConfigCfgKeyId 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.10 integer32 read-write
Configuration messages changes information on the NTP entity.
             alaNtpPrecision 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.11 integer32 read-write
This sets the server's advertised precision.
             alaNtpPeerTests 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.12 integer read-write
Enables/disable NTP peer synchronization tests. Disabling peer tests allows the NTP client to synchonize with servers that are themselves unsynchronized or would otherwise be eliminated by other time source tests. Enumeration: 'enable': 1, 'disable': 2.
             alaNtpSysStratum 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.13 integer32 read-write
The stratum level of the local server. If this number is 16 it indicates that the switch is not synchronized. This helps the clients to select clocks with lower stratum number
             alaNtpMaxAssociation 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.14 integer32 read-write
The maximum number of peer and client associations that the switch will serve. This helps ensure that the switch isn't overwhelmed by huge numbers of NTP synchronization requests
             alaNtpAuthenticate 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.15 integer read-write
Enable/Disable authentication of the NTP requests on the switch Enumeration: 'enable': 1, 'disable': 2.
         alaNtpInfo 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2
             alaNtpPeerListTable 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1 no-access
Used to display a brief list of all NTP associations related to this switch (servers, peers, etc.).
                 alaNtpPeerListEntry 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1 no-access
Each entry corresponds to one association.
                     alaNtpPeerListAddressType 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.1 inetaddresstype no-access
The InetAddress type of the synchronization host. InetAddressIPv4 (1) is the only type currently supported.
                     alaNtpPeerListAddress 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.2 inetaddress no-access
The InetAddress of the association.
                     alaNtpPeerListIpAddress 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.3 ipaddress read-only
The IP address of the association.
                     alaNtpPeerListLocal 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.4 ipaddress read-only
The local interface address assigned by NTP to the remote association. If this address is 0.0.0.0, then the local address has yet to be determined.
                     alaNtpPeerListStratum 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.5 integer32 read-only
The stratum level of the remote peer. If this number is 16, the remote peer has not been synchronized.
                     alaNtpPeerListPoll 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.6 integer32 read-only
The polling interval, in seconds.
                     alaNtpPeerListReach 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.7 integer32 read-only
The reachability register of the remote association, in octal format. This number is determined by the NTP algorithm.
                     alaNtpPeerListDelay 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.8 snmpadminstring read-only
The currently estimated delay of this remote association, in seconds. This time is determined by the NTP algorithm.
                     alaNtpPeerListOffset 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.9 snmpadminstring read-only
The currently estimated offset of this remote association, in seconds. This time is determined by the NTP algorithm.
                     alaNtpPeerListDispersion 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.10 snmpadminstring read-only
The currently estimated dispersion of this remote association, in seconds. This time is determined by the NTP algorithm.
                     alaNtpPeerListSynced 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.11 integer read-only
Indicates that NTP is synchronized with this entity. Enumeration: 'notSynchronized': 2, 'synchronized': 1.
                     alaNtpPeerListName 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.12 snmpadminstring read-only
The DNS name for the peer association,
             alaNtpPeerShowTable 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3 no-access
Used to display a brief list of all NTP associations related to this switch (servers, peers, etc.).
                 alaNtpPeerShowEntry 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1 no-access
Each entry corresponds to one association.
                     alaNtpPeerShowRemoteAddressType 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.1 inetaddresstype no-access
The InetAddress type of the synchronization host. InetAddressIPv4 (1) is the only type currently supported.
                     alaNtpPeerShowRemoteAddress 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.2 inetaddress no-access
The InetAddress of the remote association.
                     alaNtpPeerShowRemoteIpAddress 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.3 ipaddress read-only
The IP address of the remote association.
                     alaNtpPeerShowLocal 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.4 ipaddress read-only
The local interface address assigned by NTP to the remote associations.
                     alaNtpPeerShowHmode 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.5 snmpadminstring read-only
The host mode of this remote association.
                     alaNtpPeerShowPmode 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.6 snmpadminstring read-only
The peer mode of this remote association.
                     alaNtpPeerShowStratum 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.7 integer32 read-only
The stratum level of the remote peer.
                     alaNtpPeerShowPrecision 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.8 integer32 read-only
The advertised precision of this association, which is a number from -4 to -20.
                     alaNtpPeerShowLeapIndicator 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.9 integer read-only
The status of leap second insertion for this association. Enumeration: 'noLeapWarning': 0, 'leapNotInSync': 3, 'leapAddSecond': 1, 'leapDeleteSecond': 2.
                     alaNtpPeerShowReferenceId 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.10 snmpadminstring read-only
This is a 32-bit code identifying the peers primary reference source. Normally an IP address.
                     alaNtpPeerShowRootDistance 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.11 snmpadminstring read-only
This is a signed fixed-point number indicating the total roundtrip delay to the primary reference source at the root of the synchronization subnet, in seconds.
                     alaNtpPeerShowRootDispersion 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.12 snmpadminstring read-only
This is a signed fixed-point number indicating the maximum error relative to the primary reference source at the root of the synchronization subnet, in seconds.
                     alaNtpPeerShowPpoll 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.13 integer32 read-only
The poll time for this association when it is a peer.
                     alaNtpPeerShowHpoll 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.14 integer32 read-only
The poll time for this association when it is a host.
                     alaNtpPeerShowKeyid 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.15 integer32 read-only
This is an integer identifying the cryptographic key used to generate the message authentication code.
                     alaNtpPeerShowVersion 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.16 integer32 read-only
What version of NTP this association is using.
                     alaNtpPeerShowAssociation 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.17 integer32 read-only
The number of seconds since this NTP entity was associated with the switch.
                     alaNtpPeerShowValid 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.18 integer read-only
This is an integer indicating the validity of current NTP system variables. The validity is made false if system variable are changed and a new peer sample under the changed configuration has not been received. Enumeration: 'true': 1, 'false': 0.
                     alaNtpPeerShowReach 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.19 integer32 read-only
This is a shift register used to determine the reachability status of this peer.
                     alaNtpPeerShowUnreach 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.20 integer32 read-only
The number of times this NTP entity was unreachable.
                     alaNtpPeerShowFlash 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.21 integer32 read-only
This bitmap reveals the state at the last grumble from the peer and are most handy for diagnosing problems. Duplicate packet: 0x0001 Bogus packet: 0x0002 Protocol unsynchronized: 0x0004 Access denied: 0x0008 Authentication failure: 0x0010 Peer clock unsynchronized: 0x0020 Peer stratum out: 0x0040 Root delay/dispersion bounds check: 0x0080 Peer delay dispersion bounds check: 0x0100 Autokey failed: 0x0200 Proventic not confirmed: 0x0400
                     alaNtpPeerShowBroadcastOffset 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.22 snmpadminstring read-only
The broadcast delay.
                     alaNtpPeerShowTTL 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.23 integer32 read-only
This field displays the Time-to-Live (TTL) time in seconds and the mode (unicast, multicast, or broadcast) of NTP messages sent to a broadcast address.
                     alaNtpPeerShowTimer 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.24 integer32 read-only
The time to next poll in seconds.
                     alaNtpPeerShowFlags 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.25 integer32 read-only
This details which flags have been configured for this peer. Association configured: 0x01 System peer: 0x02 Enabled for burst mode synchronization: 0x04 Reference clock: 0x08 Preferred server: 0x10 Authentable: 0x20 Synchronization candidate: 0x40 Synchronization candidates short-list: 0x80
                     alaNtpPeerShowReferenceTime 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.26 snmpadminstring read-only
This is the local time, in timestamp format, when the peer clock was last updated.
                     alaNtpPeerShowOriginateTime 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.27 snmpadminstring read-only
This is the local time, in timestamp format, of the peer when its latest NTP message was sent.
                     alaNtpPeerShowReceiveTime 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.28 snmpadminstring read-only
This is the local time, in timestamp format, when the latest NTP message from the peer arrived.
                     alaNtpPeerShowTransmitTime 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.29 snmpadminstring read-only
This is the local time, in timestamp format, at which the last NTP message was sent from this association.
                     alaNtpPeerShowOffset 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.30 snmpadminstring read-only
The currently estimated offset of this remote association, in seconds.
                     alaNtpPeerShowDelay 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.31 snmpadminstring read-only
The currently estimated delay of this remote association, in seconds.
                     alaNtpPeerShowDispersion 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.32 snmpadminstring read-only
The currently estimated dispersion of this remote association, in seconds.
                     alaNtpPeerShowName 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.33 snmpadminstring read-only
The DNS name for the peer association,
                     alaNtpPeerShowStatus 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.34 bits read-only
Peer selection status: Bits 0 - 7 - Rejected due to high stratum and/or failed sanity checks: 1 - Designated falsticker by the intersection algorithm: 2 - Excess, culled from the end of the candidate list: 3 - Outlyer, discarded by the clustering algorithm: 4 - Candidate, included in the final selection set: 5 - Selected for synchronization; but distance exceeds maximum: 6 - Selected for synchronization: 7 - Selected for synchronization, PPS signal in use: 8 Peer association status: Bits 9 - 12 - Peer association configured: 9 - Peer authentication required: 10 - Last peer message authenticated: 11 - Peer reachable: 12 Bits: 'selected': 6, 'authenticated': 9, 'authenticationRequired': 10, 'candidate': 4, 'selectedPPS': 7, 'configured': 11, 'excess': 2, 'falsticker': 1, 'rejected': 0, 'reachable': 8, 'outlyer': 3, 'exceedsMaxDistance': 5.
             alaNtpClientListTable 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.4 no-access
Used to display a brief list of all incoming NTP client associations related to this switch.
                 alaNtpClientListEntry 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.4.1 no-access
Each entry corresponds to one association.
                     alaNtpClientListAddressType 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.4.1.1 inetaddresstype no-access
The InetAddress type of the incoming client association. InetAddressIPv4 (1) is the only type currently supported.
                     alaNtpClientListAddress 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.4.1.2 inetaddress no-access
The InetAddress of the client.
                     alaNtpClientListVersion 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.4.1.3 integer32 read-only
The NTP version used by the remote host for communication.
                     alaNtpClientKey 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.4.1.4 integer32 read-only
The authorization keyid for the remote host.
         alaNtpStats 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3
             alaNtpStatsPeerTable 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2 no-access
Table containing the synchronization host statistics.
                 alaNtpStatsPeerEntry 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1 no-access
Each entry corresponds to a synchronization host.
                     alaNtpStatsPeerAddressType 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.1 inetaddresstype no-access
The InetAddress type of the synchronization host. InetAddressIPv4 (1) is the only type currently supported.
                     alaNtpStatsPeerAddress 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.2 inetaddress no-access
The InetAddress of the synchronization host.
                     alaNtpStatsPeerIpAddress 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.3 ipaddress read-only
The IP address of the synchronization host.
                     alaNtpStatsPeerLocal 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.4 ipaddress read-only
The local interface address assigned by NTP to the remote association.
                     alaNtpStatsPeerLastRcv 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.5 counter32 read-only
The time since the last packet was received.
                     alaNtpStatsPeerNextSend 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.6 counter32 read-only
The time until the next packet is to be sent.
                     alaNtpStatsPeerReachChange 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.7 counter32 read-only
The time that the peer has been reachable.
                     alaNtpStatsPeerPacketsSent 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.8 counter32 read-only
The number of packets that have been sent.
                     alaNtpStatsPeerPacketsRcvd 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.9 counter32 read-only
The number of packets that have been received.
                     alaNtpStatsPeerBadAuth 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.10 counter32 read-only
The number of packets received with bad authentication.
                     alaNtpStatsPeerBogusOrigin 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.11 counter32 read-only
The number of bogus packets.
                     alaNtpStatsPeerDuplicate 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.12 counter32 read-only
The number of duplicated packets received.
                     alaNtpStatsPeerBadDispersion 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.13 counter32 read-only
The number bad dispersions.
                     alaNtpStatsPeerBadRefTime 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.14 counter32 read-only
The number of bad reference times received.
                     alaNtpStatsPeerCandidateOrder 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.15 counter32 read-only
The order of synchronization candidates.
                     alaNtpStatsPeerReset 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.16 integer32 read-write
The number of seconds since the statistics for this peer were last reset. Writing any value will reset the peer statistics.
                     alaNtpStatsPeerName 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.17 snmpadminstring read-only
The DNS name for the peer association,
             alaNtpStatsReset 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.5 integer32 read-write
Resets the statistics counters for the following subsystems: 0x01 - all peers 0x02 - i/o 0x04 - system 0x08 - memory 0x10 - timer 0x20 - authentication 0x40 - control
             alaNtpStatsMonitorTable 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6 no-access
Table containing the association monitoring list.
                 alaNtpStatsMonitorEntry 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1 no-access
Each entry corresponds to a synchronization host.
                     alaNtpStatsMonitorIndex 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.1 unsigned32 no-access
Table index.
                     alaNtpStatsMonitorAddress 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.2 ipaddress read-only
The IP address of the remote association.
                     alaNtpStatsMonitorPort 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.3 integer32 read-only
The IP port number of the association.
                     alaNtpStatsMonitorLocalAddress 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.4 ipaddress read-only
The local IP address of the association.
                     alaNtpStatsMonitorCount 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.5 counter32 read-only
The number of NTP packets received from this association.
                     alaNtpStatsMonitorMode 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.6 snmpadminstring read-only
The mode the NTP association uses in relation to the switch.
                     alaNtpStatsMonitorVersion 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.7 integer32 read-only
The version of NTP the association is using.
                     alaNtpStatsMonitorDrop 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.8 counter32 read-only
The number of NTP packets received from this association that were dropped.
                     alaNtpStatsMonitorLast 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.9 counter32 read-only
The number of seconds since the last NTP message has been received from this association.
                     alaNtpStatsMonitorFirst 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.10 counter32 read-only
The number of seconds since the first NTP message has been received from this association.
                     alaNtpStatsMonitorName 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.11 snmpadminstring read-only
The DNS name for the peer association,
         alaNtpStatsStat 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4
             alaNtpStatsStatUptime 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.1 counter32 read-only
The number of seconds the local NTP server has been associated with the switch.
             alaNtpStatsStatReset 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.2 counter32 read-only
The number of seconds since the last time the local NTP server has been restarted.
             alaNtpStatsStatBadStratum 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.3 counter32 read-only
The number of NTP packets received that had a corrupted stratum bit in the data of the packet.
             alaNtpStatsStatOldVersion 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.4 counter32 read-only
The number of NTP packets received that were of an older version of NTP (either version 1 or 2).
             alaNtpStatsStatNewVersion 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.5 counter32 read-only
The number of NTP packets received that were version 3 of NTP.
             alaNtpStatsStatUnknownVersion 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.6 counter32 read-only
The number of NTP packets received that the version was unknown (most likely due to packet corruption).
             alaNtpStatsStatBadLength 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.7 counter32 read-only
The number of NTP packets received that did not fit the NTP packet structure (most likely due to packet corruption).
             alaNtpStatsStatProcessed 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.8 counter32 read-only
The total number of NTP packets processed.
             alaNtpStatsStatBadAuth 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.9 counter32 read-only
The number of NTP packets rejected because they did not meet authentication standards.
             alaNtpStatsStatLimitRejects 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.10 counter32 read-only
The number of NTP packets rejected because they did not meet authentication standards.
         alaNtpStatsLoop 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.5
             alaNtpStatsLoopOffset 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.5.1 snmpadminstring read-only
The currently estimated offset of this remote association, in seconds. This counter indicates the offset of the peer clock relative to the local clock.
             alaNtpStatsLoopFrequency 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.5.2 snmpadminstring read-only
A number determining the local clocks frequency in relation to a reference clocks Pulse per Second (PPS). If the clock is running in perfect synchronization, this number should be 1. Otherwise, it will be slightly lower or higher in order to compensate for the time discrepancy between the reference clock and the local clock.
             alaNtpStatsLoopPollAdjust 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.5.3 integer32 read-only
Determines the peer polling time.
             alaNtpStatsLoopWatchdog 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.5.4 counter32 read-only
Makes sure that NTP timer continues to run.
         alaNtpStatsIo 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6
             alaNtpStatsIoReset 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.1 counter32 read-only
The number of seconds since the last restart of NTP.
             alaNtpStatsIoRcvBuffers 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.2 counter32 read-only
The number of switch receive buffers currently being used by this NTP entity.
             alaNtpStatsIoFreeRcvBuffers 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.3 counter32 read-only
The number of free receive buffers.
             alaNtpStatsIoUsedRcvBuffers 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.4 counter32 read-only
The number of receive buffers currently being used.
             alaNtpStatsIoRefills 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.5 counter32 read-only
The number of times we added packets.
             alaNtpStatsIoDroppedPackets 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.6 counter32 read-only
The number of packets dropped.
             alaNtpStatsIoIgnoredPackets 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.7 counter32 read-only
The number of packets ignored.
             alaNtpStatsIoRcvPackets 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.8 counter32 read-only
The total number of NTP packets received by the switch.
             alaNtpStatsIoSentPackets 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.9 counter32 read-only
The total number of NTP packets sent by the switch.
             alaNtpStatsIoNotSentPackets 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.10 counter32 read-only
The number of NTP packets generated but not sent due to restrictions.
             alaNtpStatsIoInterrupts 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.11 counter32 read-only
The number of times NTP information was interrupted in the process of transmitting or receiving.
             alaNtpStatsIoInterruptsRcv 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.12 counter32 read-only
The number of packets received by the interrupt handler.
         alaNtpAccess 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7
             alaNtpAccessKeyIdTable 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.1 no-access
Table containing the trusted keys.
                 alaNtpAccessKeyIdEntry 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.1.1 no-access
Entry of a trusted key.
                     alaNtpAccessKeyIdKeyId 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.1.1.1 integer32 no-access
Keyid of the key in the key file.
                     alaNtpAccessKeyIdTrust 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.1.1.2 integer read-write
The current state of trust of the table entry. Enumeration: 'untrusted': 2, 'trusted': 1.
             alaNtpAccessRestrictedTable 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.2 no-access
Table containing the restricted addresses.
                 alaNtpAccessRestrictedEntry 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.2.1 no-access
Entry of a restricted address.
                     alaNtpAccessRestrictedIpAddress 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.2.1.1 ipaddress no-access
IP address to restrict.
                     alaNtpAccessRestrictedMask 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.2.1.2 ipaddress no-access
IP mask to restrict.
                     alaNtpAccessRestrictedRestrictions 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.2.1.3 integer32 read-only
A mask indicating the restrictions to apply to the entry. 0x0001 - ignore, Ignore all packets from hosts. Can't use this on default (0.0.0.0). 0x0002 - noserve, Ignore NTP packets other than information queries and config-uration requests. 0x0004 - notrust, Treat these hosts normally in other respects, but never use them as synchronization sources. 0x0008 - noquery, Ignore all NTP information queries and configuration requests from the source. 0x0010 - nomodify, Ignore all NTP information queries and configuration requests that attempt to modify the state of the server. 0x0020 - nopeer, Provide stateless time service to polling hosts, but do not allocate peer memory resources to these hosts even if they otherwise might be considered useful as future synchronization partners. 0x0040 - notrap, Decline to provide control message trap service to matching hosts. 0x0080 - lowpriotrap, Declare traps set by matching hosts to be low priority. 0x0100 - limited, These hosts are subject to a limitation of the number of clients from the same net. 0x0200 - version. Serves only current version. 0x0400 - demobilize. A demobilization packet (kod) packet is sent.
                     alaNtpAccessRestrictedCount 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.2.1.4 counter32 read-only
Number of packets matched.
                     alaNtpAccessRestrictedRowStatus 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.2.1.5 rowstatus read-only
Used in accordance to installation and removal conventions for conceptual rows. The RowStatus values that are supported are the following: active(1) - The row is active and valid. createAndGo(4) - The row will be created and activated. destroy(6) - The row will be destroyed.
             alaNtpAccessRereadKeyFile 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.3 integer read-write
Reloads the keyfile containing all currently existing keys into the alaNtpAccessKeyIdTable in the switch's memory. Reading this object will yield one of the three following values: inProgress(2), successful(3), failed(4) A value of inProgress means that table reload procedure is inProgress and not yet complete. A sucessful reply means the last attempted keyfile load completed successfully. A failed response indicates the last attempt to reload failed. Writing a value of 1 to this object initiates a reload of the table. Enumeration: 'successful': 3, 'reload': 1, 'inProgress': 2, 'error': 4.
         alaNtpLocalInfo 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8
             alaNtpInfoPeer 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.1 ipaddress read-only
The IP address of the remote association.
             alaNtpInfoMode 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.2 snmpadminstring read-only
The peer mode of this remote association.
             alaNtpInfoLeapIndicator 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.3 integer read-only
The status of leap second insertion for this association. Enumeration: 'noLeapWarning': 0, 'leapNotInSync': 3, 'leapAddSecond': 1, 'leapDeleteSecond': 2.
             alaNtpInfoStratum 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.4 integer32 read-only
The stratum level of the remote peer. If this number is 16, the remote peer has not been synchronized.
             alaNtpInfoPrecision 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.5 integer32 read-only
The advertised precision of the switch. It will be a number between -4 and -20.
             alaNtpInfoDistance 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.6 snmpadminstring read-only
This is a signed fixed-point number indicating the total roundtrip delay to the primary reference source at the root of the synchronization subnet, in seconds.
             alaNtpInfoDispersion 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.7 snmpadminstring read-only
This is a signed fixed-point number indicating the maximum error relative to the primary reference source at the root of the synchronization subnet, in seconds.
             alaNtpInfoReferenceId 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.8 snmpadminstring read-only
This is a 32-bit code identifying the particular reference clock. Can be an IP address.
             alaNtpInfoReferenceTime 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.9 snmpadminstring read-only
This is the local time at which the local clock was last set or corrected.
             alaNtpInfoFrequency 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.10 snmpadminstring read-only
A number determining the local clocks frequency in relation to a reference clock's Pulse per Second (PPS). If the clock is running in perfect synchronization, this number should be 1. Otherwise, it will be slightly lower or higher in order to compensate for the time difference.
             alaNtpInfoStability 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.11 snmpadminstring read-only
The stability of the clock in relation to a reference clock's Pulse per Second (PPS).
             alaNtpInfoBroadcastDelay 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.12 snmpadminstring read-only
The broadcast delay, in seconds, of this association.
             alaNtpInfoAuthDelay 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.13 snmpadminstring read-only
The authentication delay, in seconds, of this association.
         ntpClientConfig 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.9 integer read-write
The Agent Config Information 1 -- Default(Loopback0 or closest IP) 2 -- Non Loopback0 3 -- Interface IP Specified by User Enumeration: 'default': 1, 'userIp': 3, 'nonLoopback0': 2.
         ntpClientIP 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.10 ipaddress read-write
The interface IP Address to be used in NTP Packets for Source IP field.
         alaNtpSrcIpConfig 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.11 integer read-write
The Agent Config Information 1 -- Default(Loopback0 or closest IP) 2 -- Non Loopback0 3 -- Interface IP Specified by User Enumeration: 'default': 1, 'userIp': 3, 'nonLoopback0': 2.
         alaNtpSrcIp 1.3.6.1.4.1.6486.801.1.2.1.26.1.1.12 ipaddress read-write
The interface IP Address to be used in NTP Packets for Source IP field.
     alaIND1NtpMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.26.1.2
Branch For Ntp Subsystem Managed Objects.
         alaIND1NtpMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1
Branch For Ntp Subsystem Managed Objects.
             alaNtpConfigGroup 1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1.1
Collection of NTP configuration objects.
             alaNtpInfoGroup 1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1.2
Collection of NTP peer information objects.
             alaNtpStatsGroup 1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1.3
Collection of NTP peer information objects.
             alaNtpStatsStatGroup 1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1.4
Collection of NTP statistic objects.
             alaNtpStatsLoopGroup 1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1.5
Collection of NTP clocking objects.
             alaNtpStatsIoGroup 1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1.6
Collection of NTP send and receive statistics objects.
             alaNtpAccessGroup 1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1.7
Collection of NTP authentication control objects.
             alaNtpLocalInfoGroup 1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1.8
Collection of NTP local clock information objects.
             alaNtpEventsGroup 1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1.9
Notify the management entity on reaching the maximum allowable NTP client and peer associations.
             alaNtpSrcIpGroup 1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1.10
Collection of NTP source IP information objects.
             alaNtpStatsMonitorGroup 1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1.11
Each entry corresponds to a synchronization host.
         alaIND1NtpMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.26.1.2.2
Branch For Ntp Subsystem Managed Objects.
             alaIND1NtpMonitorMIBCompliance 1.3.6.1.4.1.6486.801.1.2.1.26.1.2.2.1
Compliance statement for Health Monitoring.