ALCATEL-IND1-MAC-ADDRESS-MIB: View SNMP OID List / Download MIB

VENDOR: ALCATEL


 Home MIB: ALCATEL-IND1-MAC-ADDRESS-MIB
Download as:   
ALCATEL-IND1-VLAN-MGR-MIB, SNMPv2-CONF, ALCATEL-IND1-BASE, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, Q-BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 alcatelIND1MacAddressMIB 1.3.6.1.4.1.6486.801.1.2.1.8.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line, this is the MIB module for address learning mac addresses entity. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
     alcatelIND1MacAddressMIBNotifications 1.3.6.1.4.1.6486.801.1.2.1.8.1.0
Branch For MacAddress MIB Subsystem Notifications.
     alcatelIND1MacAddressMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.8.1.1
Branch For Source Learning Module MIB Subsystem Managed Objects.
         slMacAddressAgingTable 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.2 no-access
Definition of the timeout for those learned mac addresses and configured as deleted_on_timeout addresses.
             slMacAddressAgingEntry 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.2.1 no-access
Information about the aging time for some specific vlan. For creation of the aging time, If the vlan Id is specified, then the aging time value will be applied to those mac addresses in that vlan. Otherwise, the aging time will be applied to all of the mac addresses throughout the vlans.
                 slMacAgingValue 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.2.1.1 integer32 read-only
This object indicates the value of mac address aging time.
                 slMacAgingRowStatus 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.2.1.2 rowstatus read-only
Row Status for creating/deleting the aging time.
         slDistributedMacMode 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.5 integer read-write
Enable/Disable Distributed MAC Mode. When changed, the user must save the current configuration and reboot the switch for change to take effect. Enumeration: 'enable': 1, 'disable': 2.
         slMacLearningControlTable 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.7 no-access
This table provides the control information about the mac learning on ports
             slMacLearningControlEntry 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.7.1 no-access
This table provides the control information about the mac learning on ports
                 slMacLearningControlStatus 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.7.1.1 integer read-write
Status of mac learning on port. Enumeration: 'disabled': 2, 'enabled': 1.
         alaSlMacAddressGlobalTable 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8 no-access
This table contains MAC addresses from both Vlan, VPLS, SPBM or EVB domain. This table contains source addresses which can be configured as permanent (not aged out), delete on reset, delete on timeout in the MAC address table, and those dynamic learned addresses which can be viewed and deleted.
             alaSlMacAddressGlobalEntry 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1 no-access
Defninition of the Mac Addresses entries for which the switch has information. For creation of a Mac Address in VLAN domain, the following fields in slMacAddressGlobalEntry are required: slMacDomain slOriginId - IfIndex slServiceId - Vlan ID slMacAddressGbl slMacAddressGblManagement slMacAddressGblDisposition slMacAddressGblRowStatus: must be set last Dynamic mac addresses can not be created manually. For creation of Mac Address in VPLS domain, following fields in alaSlMacAddressGlobalEntry are required: slMacDomain slLocaleType - SAP/sBind slServiceId - VPLS Service ID slOriginId - SAP - PortId; sBind - SDPID slSubId - SAP - VlanId; sBind - VcID slMacAddressGbl slMacAddressGblRowStatus: must be set last Dynamic mac addresses can not be created manually. For creation of Mac Address in SPBM domain, following fields in alaSlMacAddressGlobalEntry are required: slMacDomain slLocaleType - SAP/sBind slServiceId - SPBM Service ID slSvcISID - SPBM I-SID Service Identifier slOriginId - SAP - PortId; sBind - SDPID slSubId - SAP - VlanId; sBind - VcID slMacAddressGbl slMacAddressGblRowStatus: must be set last Dynamic mac addresses can not be created manually. For creation of Mac Address in EVB domain, following fields in alaSlMacAddressGlobalEntry are required: slMacDomain slLocaleType - SAP slServiceId - SPBM Service ID slSvcISID - SPBM I-SID Service Identifier slOriginId - SAP - PortId; slSubId - SAP - VlanId; slMacAddressGbl slMacAddressGblRowStatus: must be set last Dynamic mac addresses can not be created manually. For deletion of a Mac Address in VLAN domain, the following fields in alaSlMacAddressGlobalEntry are required: slMacDomain slOriginId - IfIndex slServiceId - Vlan ID slMacAddressGbl slMacAddressGblManagement slMacAddressGblRowStatus: must be set last For deletion of a Mac Address in VPLS based, following fileds in alaSlMacAddressGlobalEntry are required: slMacDomain slLocaleType - SAP/sBind slServiceId - VPLS Service ID slOriginId - SAP - PortId; sBind - SDPID slSubId - SAP - VlanId; sBind - VcID slMacAddressGbl slMacAddressGblRowStatus: must be set last For deletion of a Mac Address in SPBM based, following fileds in alaSlMacAddressGlobalEntry are required: slMacDomain slLocaleType - SAP/sBind slServiceId - VPLS Service ID slSvcISID - SPBM I-SID Service Identifier slOriginId - SAP - PortId; sBind - SDPID slSubId - SAP - VlanId; sBind - VcID slMacAddressGbl slMacAddressGblRowStatus: must be set last For deletion of a Mac Address in EVB based, following fileds in alaSlMacAddressGlobalEntry are required: slMacDomain slLocaleType - SAP slServiceId - VPLS Service ID slSvcISID - SPBM I-SID Service Identifier slOriginId - SAP - PortId; slSubId - SAP - VlanId; slMacAddressGbl slMacAddressGblRowStatus: must be set last
                 slMacDomain 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.1 integer no-access
* This object indicates whether this MAC is learned on Vlan, VPLS, SPBM, EVB domain. * To flush a MAC or MACs, this field may or may not be specified. If this field is not specified, then the default -all(0)- value will be expected; * To program a static MAC address, this field must be specified with values other than -all(0)- Enumeration: 'evb': 4, 'vpls': 2, 'all': 0, 'vlan': 1, 'spbm': 3.
                 slLocaleType 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.2 integer no-access
* This field is used in VPLS, SPBM or EVB domain. This field will be -default(0)- for VLAN domain. * To flush a MAC or MACs, this field may or may not be specified. If this field is not specified, then the -default(0)- value will be expected; * To program a MAC address on Vlan domain, this field will be -default(0)-; To program a MAC address on non VLAN domain, this field must be specfied with values other than -default(0)- Enumeration: 'default': 0, 'sap': 1, 'sBind': 2.
                 slOriginId 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.3 integer32 no-access
* This field should be ifIndex for MAC address from Vlan domain, and also ifindex for SAP from VPLS, SPBM & EVB, domain; * This field should be the SDP_ID for MAC address from sBind of VPLS and SPBM domain; * To flush a MAC or MACs, this field may or may not be specified. If this field is not specified, then value `0` will be expected; * To program a static MAC address, this field must be specified with values within the range (1..2147483647) spcified
                 slServiceId 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.4 integer32 no-access
* This field should be the VLAN ID for MAC learnt from VLAN domain; * This field should be the Service ID for MAC learnt from VPLS, SPB, and EVB domain; * To flush a MAC or MACs, this field may or may not be specified. If this field is not specified, then value `0` will be expected; * To program a static MAC address, this field must be specified with values within the range (1..32767) spcified
                 slSubId 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.5 integer32 no-access
* This field is used in VPLS, SPBM, and EVB domain only. This field should be the EncapId for SAP, and VCID for SBIND. * If this MAC is from SAP, then this field should be the VLANID (1 ..4096); * If this MAC is from SDP, then this field should be the SvcId (1 .. 32767); * Since we may need to support QinQ (OVlan and IVlan), this field will be partitioned into 2 16 bits values, upper 16 bits will be Ovlan and lower 16 bits will be IVlan. If neither OVlan or IVlan is specified, then 0xFFFF will be expected. * To flush a MAC or MACs, this field may or may not be specified. If this field is not specified, then value `0` will be expected; * To program a static MAC address, this field must be specified with values within range specified
                 slMacAddressGbl 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.6 macaddress no-access
* The MAC address for this entry. * To flush a MAC or MACs, this field may or may not be specified. If this field is not specified, then value `FF:FF:FF:FF:FF:FF` will be expected, then all MAC addresses will be flushed. * To program a static MAC address, this field must be specified * with valid MAC address
                 slMacAddressGblManagement 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.7 integer read-only
This object indicates the management of this entry. permanent(1) - this entry is currently in use and will remain so after the user removing this entry. deleteOnReset(2) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(3) - this entry is currently in use and will remain so until it is aged out. learned(4) - this entry is currently in use and will remain so until it is aged out. staticMulticast(5) - this entry is only applicable to multicast destination addresses Enumeration: 'learned': 4, 'permanent': 1, 'deleteOnTimeout': 3, 'deleteOnReset': 2, 'staticMulticast': 5.
                 slMacAddressGblDisposition 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.8 integer read-only
This object indicates the disposition of the entry. bridging(1) - this entry is currently in use for bridging. filtering(2) - this entry is currently in use for filtering. quarantined(3) - this entry is currently in use for quarantined mac. hostIntegritycheck(4) - the entry is currently under host integrity checking. userNetworkProf(5) - the entry is currently under user network profile Qos. Enumeration: 'userNetworkProf': 5, 'bridging': 1, 'filtering': 2, 'hostIntegrity': 4, 'quarantined': 3.
                 slMacAddressGblRowStatus 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.9 rowstatus read-only
Row Status for creating/deleting the mac address.
                 slMacAddressGblProtocol 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.10 macaddressprotocoltype read-only
This object indicates the protocol associated with a mac address.
                 slMacAddressGblGroupField 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.11 unsigned32 read-only
                 slSvcISID 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.12 integer32 read-only
* This field is used in SPBM domain only. This field should be the ISID ID of MAC learnt in SPBM domain; * To flush a MAC or MACs, this field may or may not be specified. If this field is not specified, then value `-1` will be expected; * To program a static MAC address, this field may or may not sepcified as well. If not specified, then value `0` will be expected; If this field is specified, then the values must be within the range (256..16777214)
         slMacLearningVlanControlTable 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.10 no-access
This table provides the control information about the mac learning on ports
               slMacLearningVlanControlEntry 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.10.1 no-access
This table provides the control information about the mac learning on ports
                   slMacLearningVlanControlStatus 1.3.6.1.4.1.6486.801.1.2.1.8.1.1.10.1.1 integer read-write
Status of mac learning on port. Enumeration: 'disabled': 2, 'enabled': 1.
     alcatelIND1MacAddressMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.8.1.2
Branch for Source Learning Module MIB Subsystem Conformance Information.
         alcatelIND1MacAddressMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.8.1.2.1
Branch for Source Learning Module MIB Subsystem Units of Conformance.
             slMacAddressGroup 1.3.6.1.4.1.6486.801.1.2.1.8.1.2.1.1
Collection of objects for management of source learning Mac addresses.
             slMacAgingGroup 1.3.6.1.4.1.6486.801.1.2.1.8.1.2.1.2
Collection of objects for management of source learning Mac addresses aging-time.
             slMacGeneralGroup 1.3.6.1.4.1.6486.801.1.2.1.8.1.2.1.3
Collection of general sl objects.
             slMacLearningGroup 1.3.6.1.4.1.6486.801.1.2.1.8.1.2.1.4
Collection of objects for management of enabling or disabling source learning on the ports.
             slMacVlanLearningGroup 1.3.6.1.4.1.6486.801.1.2.1.8.1.2.1.5
Collection of objects for management of enabling or disabling source learning on the vlans.
         alcatelIND1MacAddressMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.8.1.2.2
Branch for Source Learning Module MIB Subsystem Compliance Statements.
             alcatelIND1MacAddressMIBCompliance 1.3.6.1.4.1.6486.801.1.2.1.8.1.2.2.1
Compliance statement for source learning.