ALANTEC-MIB: View SNMP OID List / Download MIB

VENDOR: ALANTEC


 Home MIB: ALANTEC-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 alantec 1.3.6.1.4.1.390
         products 1.3.6.1.4.1.390.1
             powerhub 1.3.6.1.4.1.390.1.1
             powerbits 1.3.6.1.4.1.390.1.2
             powerhub7000 1.3.6.1.4.1.390.1.3
                 alchassis 1.3.6.1.4.1.390.1.3.1
                     alSlotTable 1.3.6.1.4.1.390.1.3.1.1 no-access
A table that contains information about each slot in the PowerHub 7000 chassis.
                         alSlotEntry 1.3.6.1.4.1.390.1.3.1.1.1 no-access
Information about a specific slot.
                             alSlotNumber 1.3.6.1.4.1.390.1.3.1.1.1.1 integer read-only
The slot number for which the following information applies.
                             alSlotCardType 1.3.6.1.4.1.390.1.3.1.1.1.2 integer read-only
The card type for this slot. Enumeration: 'fddi-dual-das': 4, 'fddi-single-das': 5, 'utp-4X4': 2, 'utp-4X6': 3, 'fddi-concentrator': 10, 'fast-thernet': 12, 'utp-16X1': 6, 'utp-13X1': 7, 'fddi-dual-universal': 8, 'universal-ethernet': 1, 'cddi-concentrator': 11, 'fddi-single-universal': 9.
                             alSlotStatus 1.3.6.1.4.1.390.1.3.1.1.1.3 integer read-only
The status of the card in this slot. Enumeration: 'not-present': 2, 'not-equipped': 1.
                             alSlotModel 1.3.6.1.4.1.390.1.3.1.1.1.4 displaystring read-only
The model number for this card.
                             alSlotRevision 1.3.6.1.4.1.390.1.3.1.1.1.5 displaystring read-only
The revision number for this card.
                             alSlotIssue 1.3.6.1.4.1.390.1.3.1.1.1.6 displaystring read-only
The issue number for this slot.
                             alSlotDeviation 1.3.6.1.4.1.390.1.3.1.1.1.7 displaystring read-only
The deviation for this slot.
                             alSlotSerialNumber 1.3.6.1.4.1.390.1.3.1.1.1.8 displaystring read-only
The serial number of this card this slot.
                             alSlotPower5 1.3.6.1.4.1.390.1.3.1.1.1.9 integer read-only
The number of milliamps. of current drawn by this slot at 5 Volts.
                             alSlotPower12 1.3.6.1.4.1.390.1.3.1.1.1.10 integer read-only
The number of milliamps. of current drawn by this slot at 12 Volts.
                             alSlotPower33 1.3.6.1.4.1.390.1.3.1.1.1.11 integer read-only
The number of milliamps. of current drawn by this slot at 3.3 Volts.
                             alSlotPowerOther 1.3.6.1.4.1.390.1.3.1.1.1.12 integer read-only
The number of milliamps. of current drawn by this slot at OTHER voltage.
                     alVportTable 1.3.6.1.4.1.390.1.3.1.2 no-access
A table that contains information about each virtual port in the PowerHub 7000 chassis.
                         alVportEntry 1.3.6.1.4.1.390.1.3.1.2.1 no-access
Information about a specific virtual port.
                             alVportNumber 1.3.6.1.4.1.390.1.3.1.2.1.1 integer read-only
The virtual port number for which the following information applies.
                             alVportSlotNumber 1.3.6.1.4.1.390.1.3.1.2.1.2 integer read-only
The slot number for the virtual port number which is identified by the instance of alVportNumber.
                             alVportPortNumber 1.3.6.1.4.1.390.1.3.1.2.1.3 integer read-only
The physical port number on the slot for a virtual port number which is identified by an instance of alVportNumber.
                             alVportPortType 1.3.6.1.4.1.390.1.3.1.2.1.4 integer read-only
The port type for the virtual port which is identified by the instance of alVportNumber. Enumeration: 'bnc': 1, 'aui': 3, 'fiber': 2, 'not-stuffed': 7.
                             alVportStatus 1.3.6.1.4.1.390.1.3.1.2.1.5 integer read-only
The port status for the virtual port which is identified by the instance of alVportNumber. Enumeration: 'bad': 1, 'removed': 2.
                             alVportControllerType 1.3.6.1.4.1.390.1.3.1.2.1.6 integer read-only
The controller type for the virtual port which is identified by the instance of alVportNumber.
                     alSlotToVportTable 1.3.6.1.4.1.390.1.3.1.3 no-access
A table that contains information about each virtual port in the PowerHub 7000 chassis.
                         alSlotVportEntry 1.3.6.1.4.1.390.1.3.1.3.1 no-access
Information about a specific virtual port.
                             alSlotVportSlotNumber 1.3.6.1.4.1.390.1.3.1.3.1.1 integer read-only
The slot number for the virtual port number which is identified by the instance of alVportNumber.
                             alSlotVportPortNumber 1.3.6.1.4.1.390.1.3.1.3.1.2 integer read-only
The physical port number on the slot for a virtual port number which is identified by an instance of alVportNumber.
                             alSlotVportNumber 1.3.6.1.4.1.390.1.3.1.3.1.3 integer read-only
The virtual port number for which the following information applies.
                             alSlotVportPortType 1.3.6.1.4.1.390.1.3.1.3.1.4 integer read-only
The port type for the virtual port which is identified by the instance of alVportNumber.
                             alSlotVportStatus 1.3.6.1.4.1.390.1.3.1.3.1.5 integer read-only
The port status for the virtual port which is identified by the instance of alVportNumber.
                             alSlotVportControllerType 1.3.6.1.4.1.390.1.3.1.3.1.6 integer read-only
The controller type for the virtual port which is identified by the instance of alVportNumber.
                     alPSTable 1.3.6.1.4.1.390.1.3.1.4 no-access
A table that contains information about each power supply in the PowerHub 7000 chassis.
                         alPSEntry 1.3.6.1.4.1.390.1.3.1.4.1 no-access
Information about a specific power supply.
                             alPSNumber 1.3.6.1.4.1.390.1.3.1.4.1.1 integer read-only
The power supply number
                             alPSStatus 1.3.6.1.4.1.390.1.3.1.4.1.2 integer read-only
The status of the power supply identified by the instance of alPSNumber.
                     alCpuSlot 1.3.6.1.4.1.390.1.3.1.5 integer read-only
The slot number in which the packet engine resides
         common 1.3.6.1.4.1.390.2
             alsystem 1.3.6.1.4.1.390.2.1
                 alChassisType 1.3.6.1.4.1.390.2.1.1 integer read-only
The model type of the PowerHub Enumeration: 'model3407': 11, 'model3406': 10, 'model3405': 9, 'model3404': 8, 'model3403': 7, 'model3402': 6, 'model3401': 5, 'model3420': 15, 'model3423': 18, 'model3422': 17, 'model3425': 20, 'model3100': 1, 'model3424': 19, 'model3410': 12, 'model3411': 13, 'model3412': 14, 'model3300': 3, 'model5003': 23, 'model3200': 2, 'model5001': 21, 'model3421': 16, 'model5002': 22, 'model5005': 25, 'model5004': 24, 'model5006': 26, 'model3500': 4.
                 alMcpuRtVer 1.3.6.1.4.1.390.2.1.2 displaystring read-only
Runtime software version of the motherboard CPU; it is an ASCII string that describes the version as well as the date and time the software was released from the factory.
                 alMcpuPromVer 1.3.6.1.4.1.390.2.1.3 displaystring read-only
PROM software version of the motherboard CPU; it is an ASCII string that describes the version as well as the date and time the software was released from the factory.
                 alFcpuOneRtVer 1.3.6.1.4.1.390.2.1.4 displaystring read-only
Runtime software version of F-bus CPU for the first FDDI board.
                 alFcpuTwoRtVer 1.3.6.1.4.1.390.2.1.5 displaystring read-only
Runtime software version of F-bus CPU for the second FDDI board.
                 alFcpuOnePromVer 1.3.6.1.4.1.390.2.1.6 displaystring read-only
PROM software version of F-bus CPU for the first FDDI board.
                 alFcpuTwoPromVer 1.3.6.1.4.1.390.2.1.7 displaystring read-only
PROM software version of F-bus CPU for the second FDDI board.
                 alRcpuOneRtVer 1.3.6.1.4.1.390.2.1.8 displaystring read-only
Runtime software version of Ring CPU for the first FDDI board.
                 alRcpuTwoRtVer 1.3.6.1.4.1.390.2.1.9 displaystring read-only
Runtime software version of Ring CPU for the second FDDI board.
                 alRcpuOnePromVer 1.3.6.1.4.1.390.2.1.10 displaystring read-only
PROM software version of Ring CPU for the first FDDI board.
                 alRcpuTwoPromVer 1.3.6.1.4.1.390.2.1.11 displaystring read-only
PROM software version of Ring CPU for the second FDDI board.
             albridge 1.3.6.1.4.1.390.2.2
                 alBridgeTable 1.3.6.1.4.1.390.2.2.1 no-access
A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
                     alBridgeEntry 1.3.6.1.4.1.390.2.2.1.1 no-access
Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.
                         alBridgeEntryAddress 1.3.6.1.4.1.390.2.2.1.1.1 macaddress read-only
The MAC address for which the bridge has forwarding and/or filtering information.
                         alBridgeEntryPort 1.3.6.1.4.1.390.2.2.1.1.2 integer read-only
The port number of the port on which a frame having a source address equal to the value of the corresponding instance of alBridgeEntryAddress has been seen.
                         alBridgeEntryLink 1.3.6.1.4.1.390.2.2.1.1.3 integer read-only
The link number on the port on which a frame having as ource address equal to the value of the corresponding instance of alBridgeEntryAddress has been seen. Only applies to the UTP port type.
                         alBridgeEntryRule 1.3.6.1.4.1.390.2.2.1.1.4 integer read-write
The rule number that is applied to packets that are forwarded to or from this address.
                         alBridgeEntryFlags 1.3.6.1.4.1.390.2.2.1.1.5 integer read-only
The status of this entry.
                 alBridgeTblClear 1.3.6.1.4.1.390.2.2.2 integer read-write
When set, clears the Bridge table.
                 alBrFlushCache 1.3.6.1.4.1.390.2.2.3 integer read-write
When set, flushes the cache.
                 alPortStatsTable 1.3.6.1.4.1.390.2.2.4 no-access
Per port statistics
                     portStatsEntry 1.3.6.1.4.1.390.2.2.4.1 no-access
                         portStatsPort 1.3.6.1.4.1.390.2.2.4.1.1 integer read-only
                         portStatsPktsIn 1.3.6.1.4.1.390.2.2.4.1.2 integer read-only
                         portStatsPktsOut 1.3.6.1.4.1.390.2.2.4.1.3 integer read-only
                         portStatsOctetsIn 1.3.6.1.4.1.390.2.2.4.1.4 integer read-only
                         portStatsOctetsOut 1.3.6.1.4.1.390.2.2.4.1.5 integer read-only
                         portStatsMultiCastPktsIn 1.3.6.1.4.1.390.2.2.4.1.6 integer read-only
                         portStatsMulticastPktsOut 1.3.6.1.4.1.390.2.2.4.1.7 integer read-only
                         portStatsTableMisses 1.3.6.1.4.1.390.2.2.4.1.8 integer read-only
                         portStatsRcvBuffErrs 1.3.6.1.4.1.390.2.2.4.1.9 integer read-only
                         portStatsXmitBuffErrs 1.3.6.1.4.1.390.2.2.4.1.10 integer read-only
                         portStatsTotalCollisions 1.3.6.1.4.1.390.2.2.4.1.11 integer read-only
                         portStatsRcvCollisions 1.3.6.1.4.1.390.2.2.4.1.12 integer read-only
                         portStatsXmitCollisions 1.3.6.1.4.1.390.2.2.4.1.13 integer read-only
                         portStatsXmitQLen 1.3.6.1.4.1.390.2.2.4.1.14 integer read-only
                         portStatsPeakUtilization 1.3.6.1.4.1.390.2.2.4.1.15 integer read-only
                         portStatsCurrUtilization 1.3.6.1.4.1.390.2.2.4.1.16 integer read-only
                         portStatsLossOfCarrier 1.3.6.1.4.1.390.2.2.4.1.17 integer read-only
                         portStatsExcessRetries 1.3.6.1.4.1.390.2.2.4.1.18 integer read-only
                 alBridgeStatsClear 1.3.6.1.4.1.390.2.2.5 integer read-write
When set, clears the statistics for the bridge.
                 alBridgePPControl 1.3.6.1.4.1.390.2.2.6 integer read-write
When set to 0 , disables the port to port collection of the stats; when set to 1, enables the port to port stats collection; when set to 2, clears the port to port stats. Enumeration: 'clear': 2, 'enable': 1.
                 alPortToPortTable 1.3.6.1.4.1.390.2.2.7 no-access
Statistics for port to port traffic.
                     portToPortEntry 1.3.6.1.4.1.390.2.2.7.1 no-access
Statistics for port to port traffic
                         alPPSourecPort 1.3.6.1.4.1.390.2.2.7.1.1 integer read-only
Source port number
                         alPPDestinationPort 1.3.6.1.4.1.390.2.2.7.1.2 integer read-only
Source port number
                         portToPortPackets 1.3.6.1.4.1.390.2.2.7.1.3 integer read-only
                         portToPortOctets 1.3.6.1.4.1.390.2.2.7.1.4 integer read-only
                 alPortConfigTable 1.3.6.1.4.1.390.2.2.8 no-access
Per port configuration for configuring Source and Destination Rules etc.
                     portConfigEntry 1.3.6.1.4.1.390.2.2.8.1 no-access
                         portConfigPort 1.3.6.1.4.1.390.2.2.8.1.1 integer read-only
The port number for this table entry
                         portConfigSrcRule 1.3.6.1.4.1.390.2.2.8.1.2 integer read-write
Source Rule for the port number identified by the instance of portConfigPort
                         portConfigDstRule 1.3.6.1.4.1.390.2.2.8.1.3 integer read-write
Destination Rule for the port number identified by the instance of portConfigPort
                         portConfigBlockLearnedEntries 1.3.6.1.4.1.390.2.2.8.1.4 integer read-write
When set to True (1), the port identified by the instance of portConfigPort will block the learned entries; if set to False (0) the port will not block the learned entries
                 alBridgeIpBridging 1.3.6.1.4.1.390.2.2.9 integer read-write
When set to enable(1), enables the IP bridging and if set to disable(0), disables the IP bridging.
                 alBrTemplateTable 1.3.6.1.4.1.390.2.2.10 no-access
Per template information
                       brTemplateEntry 1.3.6.1.4.1.390.2.2.10.1 no-access
                           brTemplateNumber 1.3.6.1.4.1.390.2.2.10.1.1 integer read-write
The number of the template with which it is identified.
                           brTemplateOffset 1.3.6.1.4.1.390.2.2.10.1.2 integer read-write
A displacement, in octets, from the beginning of the packet. This must be a multiple of 4 in the range from 0 to 124 decimal. A value of -1 will delete the entry
                           brTemplateMask 1.3.6.1.4.1.390.2.2.10.1.3 counter read-write
                           brTemplateComparator 1.3.6.1.4.1.390.2.2.10.1.4 counter read-write
                           brTemplateOption 1.3.6.1.4.1.390.2.2.10.1.5 integer read-write
                 alBrRuleTable 1.3.6.1.4.1.390.2.2.11 no-access
Per rule information
                       brRuleEntry 1.3.6.1.4.1.390.2.2.11.1 no-access
                           brRuleNumber 1.3.6.1.4.1.390.2.2.11.1.1 integer read-write
The number of the rule with which it is identified.
                           brRuleStatement 1.3.6.1.4.1.390.2.2.11.1.2 displaystring read-write
Rule statement
                 alBrRuleToNodeTable 1.3.6.1.4.1.390.2.2.12 no-access
                       alBrRuleToNodeEntry 1.3.6.1.4.1.390.2.2.12.1 no-access
                           brRuleToNodePort 1.3.6.1.4.1.390.2.2.12.1.1 integer read-write
The number of the port for which this rule applies
                           brRuleToNodeMacAddr 1.3.6.1.4.1.390.2.2.12.1.2 physaddress read-write
The source MAC address
                           brRuleToNodeRule 1.3.6.1.4.1.390.2.2.12.1.3 integer read-write
The rule number that applies to this entry.
                 alBrGroupTable 1.3.6.1.4.1.390.2.2.13 no-access
                       alBrGroupEntry 1.3.6.1.4.1.390.2.2.13.1 no-access
                           brGroupNumber 1.3.6.1.4.1.390.2.2.13.1.1 integer read-write
The group number by which the group is identified with.
                           brGroupPortsMask 1.3.6.1.4.1.390.2.2.13.1.2 integer read-write
The ports associated with the group number identified by the instance of brGroupNumber.
                           brGroupName 1.3.6.1.4.1.390.2.2.13.1.3 octet string read-write
The name of the group for which this entry applies
                 alBridgeSTPControl 1.3.6.1.4.1.390.2.2.14 integer read-write
When set to 0 , disables the spanning tree. set to 1, enables the spanning tree.
                 alPortStateTable 1.3.6.1.4.1.390.2.2.15 no-access
Per port state information about spanning tree, dignostics and management.
                       portStateEntry 1.3.6.1.4.1.390.2.2.15.1 no-access
                           portStatePort 1.3.6.1.4.1.390.2.2.15.1.1 integer read-only
The port number for this table entry
                           portStateDiag 1.3.6.1.4.1.390.2.2.15.1.2 integer read-only
The diagnostics state of the port
                           portStateMgmt 1.3.6.1.4.1.390.2.2.15.1.3 integer read-only
The management state of the port
                           portStateStp 1.3.6.1.4.1.390.2.2.15.1.4 integer read-only
The spanning tree state of the port.
                           portStatePortName 1.3.6.1.4.1.390.2.2.15.1.5 displaystring read-only
The name of this port
             almgmt 1.3.6.1.4.1.390.2.3
                 alLinkStatsCollect 1.3.6.1.4.1.390.2.3.2 integer read-write
When set to enable(1), per link stats collection is enabled; when set to disable(0), the per link stats are not collected.
                 alLinkStatsClear 1.3.6.1.4.1.390.2.3.3 integer read-write
When set, clears the link stats
                 alLinkStatsTable 1.3.6.1.4.1.390.2.3.4 no-access
Per link stats table
                     linkStatsEntry 1.3.6.1.4.1.390.2.3.4.1 no-access
                         linkStatsPort 1.3.6.1.4.1.390.2.3.4.1.1 integer read-only
Port Number
                         linkStatsLink 1.3.6.1.4.1.390.2.3.4.1.2 integer read-only
Link Number
                         linkStatsPktsIn 1.3.6.1.4.1.390.2.3.4.1.3 integer read-only
Pkts In - corresponds to pi
                         linkStatsOctetsIn 1.3.6.1.4.1.390.2.3.4.1.4 integer read-only
Octets In - corresponds to oi
                         linkStatsBMCastPktsIn 1.3.6.1.4.1.390.2.3.4.1.5 integer read-only
Bmcast Pks In - corresponds to bpi
                         linkStatsGiantPkts 1.3.6.1.4.1.390.2.3.4.1.6 integer read-only
Giant Pkts - corresponds to gp
                         linkStatsFrameErrs 1.3.6.1.4.1.390.2.3.4.1.7 integer read-only
Frame Errors - corresponds to fa
                         linkStatsFCSErrs 1.3.6.1.4.1.390.2.3.4.1.8 integer read-only
FCS Errors corresponds to fcs
                         linkStatsRcvCollisions 1.3.6.1.4.1.390.2.3.4.1.9 integer read-only
Receive Collisions- corresponds to rc
                 alLinkControlTable 1.3.6.1.4.1.390.2.3.5 no-access
Per link stats table
                     linkControlEntry 1.3.6.1.4.1.390.2.3.5.1 no-access
                         linkControlPort 1.3.6.1.4.1.390.2.3.5.1.1 integer read-only
Port number for this entry.
                         linkControlLink 1.3.6.1.4.1.390.2.3.5.1.2 integer read-only
Link number for this entry.
                         linkControlEnlState 1.3.6.1.4.1.390.2.3.5.1.3 integer read-only
Enable state for the link corresponds to enl option in lkd command.
                         linkControlLinkTest 1.3.6.1.4.1.390.2.3.5.1.4 integer read-only
Link test status for the link; corresponds to lt option of the lkd command.
                         linkControlPartition 1.3.6.1.4.1.390.2.3.5.1.5 integer read-only
Partitioning state of the link
                         linkControlPolarity 1.3.6.1.4.1.390.2.3.5.1.6 integer read-only
Polarity of the link
                         linkControlEnable 1.3.6.1.4.1.390.2.3.5.1.7 integer read-write
Setting the value of this object to Enable (1), will enable the link and setting to Disable(2), will disable the link.
                 alPortLinkTable 1.3.6.1.4.1.390.2.3.6 no-access
Per port link type
                     portLinkEntry 1.3.6.1.4.1.390.2.3.6.1 no-access
                         portLinkPort 1.3.6.1.4.1.390.2.3.6.1.1 integer read-only
The port number for which the port type is to be set
                         portLinkType 1.3.6.1.4.1.390.2.3.6.1.2 integer read-write
The type of port Enumeration: 'bnct': 3, 'fiber': 5, 'aui': 1, 'unknown': 6, 'utp': 4, 'bnc': 2.
                 alFiberStatsTable 1.3.6.1.4.1.390.2.3.7 no-access
Per port fiber stats and Fiber Security
                     fiberStatsEntry 1.3.6.1.4.1.390.2.3.7.1 no-access
                         fiberStatsPort 1.3.6.1.4.1.390.2.3.7.1.1 integer read-only
The fiber port for which the stats are requested or the Fiber violation is set
                         fiberAuiStatus 1.3.6.1.4.1.390.2.3.7.1.2 integer read-only
The fiber aui status for the port that is specified by the instance of fiberStatsPort
                         fiberSecurityViolation 1.3.6.1.4.1.390.2.3.7.1.3 integer read-write
The fiber port for which the stats are requested or the Fiber violation is set Enumeration: 'ignore': 2, 'clear': 3, 'detect': 1.
                 alPortMonitorClose 1.3.6.1.4.1.390.2.3.8 integer read-write
Setting the value to close(1), will turn the port monitoring off.
                 alPortMonitorTable 1.3.6.1.4.1.390.2.3.9 no-access
                     portMonitorEntry 1.3.6.1.4.1.390.2.3.9.1 no-access
                         portMonSrcPort 1.3.6.1.4.1.390.2.3.9.1.1 integer read-write
The traffic to/from this port will be monitored on the portMonDstPort
                         portMonDstPort 1.3.6.1.4.1.390.2.3.9.1.2 integer read-write
The traffic to/from portMonSrcPort will be monitored on this port
                         portMonTrafficType 1.3.6.1.4.1.390.2.3.9.1.3 integer read-write
Setting this value to 1, will let the port monitor monitor forwarded traffic; setting to 0 means the forwarded traffic will not be monitored. Enumeration: 'all': 7, 'incoming': 2, 'forwarded': 1, 'forwardedincoming': 3, 'generated': 4, 'forwardedgenerated': 5, 'incominggenerated': 6.
                 alReboot 1.3.6.1.4.1.390.2.3.10 integer read-write
Setting the value to Reboot(1), will reboot the PowerHub.
                 alPortMonitorViewTable 1.3.6.1.4.1.390.2.3.11 no-access
                       portMonitorViewEntry 1.3.6.1.4.1.390.2.3.11.1 no-access
                           portMonViewSrcPort 1.3.6.1.4.1.390.2.3.11.1.1 integer read-only
The traffic from this port to the port designated by portMonViewDstPort will be monitored on portMonViewMonitorPort.
                           portMonViewDstPort 1.3.6.1.4.1.390.2.3.11.1.2 integer read-only
The traffic to this port from the port designated by portMonViewSrcPort will be monitored on portMonViewMonitorPort.
                           portMonViewMonitorPort 1.3.6.1.4.1.390.2.3.11.1.3 integer read-write
The traffic to portMonViewDstPort from the port designated by portMonViewSrcPort will be monitored on portMonViewMonitorPort.
             alrip 1.3.6.1.4.1.390.2.4
                 alRipConfigTable 1.3.6.1.4.1.390.2.4.1 no-access
Per port RIP configuration.
                     ripConfigEntry 1.3.6.1.4.1.390.2.4.1.1 no-access
                         ripConfigPort 1.3.6.1.4.1.390.2.4.1.1.1 integer read-write
Port number for which the RIP parameters are to be set or viewed.
                         ripConfigTalk 1.3.6.1.4.1.390.2.4.1.1.2 integer read-write
Controls whether the hub generates RIP packets on the port identified by the instance of ripConfigPort.
                         ripConfigListen 1.3.6.1.4.1.390.2.4.1.1.3 integer read-write
Controls whether the hub processes RIP packets received on the port identified by the instance of ripConfigPort.
                         ripConfigPoison 1.3.6.1.4.1.390.2.4.1.1.4 integer read-write
Controls what happens when a route goes down. If set to no(0), the hub simply stops reporting the route. If set to yes(1), the hub reports it one more time, but with a metric value of 16, which infinity as far as RIP is concerned. Thus other routers learn immediately that the route is down.
                         ripConfigRptStaticRt 1.3.6.1.4.1.390.2.4.1.1.5 integer read-write
When RIP packets are generated on the port, controls whether the hub reports the static routes in its route table.
                         ripConfigRptDefaultRt 1.3.6.1.4.1.390.2.4.1.1.6 integer read-write
When RIP packets are generated on the port, controls whether the hub reports the default routes, if any, in ints route table.
                         ripConfigAccptDefaultRt 1.3.6.1.4.1.390.2.4.1.1.7 integer read-write
When RIP packets are received on the port, controls whether the hub accepts(learns) a default route that is reported in a RIP packet.
                 alRipstatsClear 1.3.6.1.4.1.390.2.4.2 integer read-write
When set, clears the RIP stats
                 alRipStatPktsRcvd 1.3.6.1.4.1.390.2.4.3 integer read-only
Packets Received.
                 alRipStatPktsXmitted 1.3.6.1.4.1.390.2.4.4 integer read-only
Packets Sent.
                 alRipStatReqsRcvd 1.3.6.1.4.1.390.2.4.5 integer read-only
Requests Received.
                 alRipStatRespRcvd 1.3.6.1.4.1.390.2.4.6 integer read-only
Responses Received.
                 alRipStatReqsXmitted 1.3.6.1.4.1.390.2.4.7 integer read-only
Requests Sent.
                 alRipStatRespXmitted 1.3.6.1.4.1.390.2.4.8 integer read-only
Responses Sent.
                 alRipStatRouteTimeOuts 1.3.6.1.4.1.390.2.4.9 integer read-only
Route Timeouts.
                 alRipStatShortPkts 1.3.6.1.4.1.390.2.4.10 integer read-only
Short packets received.
                 alRipStatBadVer 1.3.6.1.4.1.390.2.4.11 integer read-only
Bad version pkts received.
                 alRipStatBadZeroes 1.3.6.1.4.1.390.2.4.12 integer read-only
Bad zeroes received.
                 alRipStatBadSrcPort 1.3.6.1.4.1.390.2.4.13 integer read-only
Packets with bad Source port received.
                 alRipStatBadSrcIp 1.3.6.1.4.1.390.2.4.14 integer read-only
Packets with bad source IP address received.
                 alRipStatPktsSelf 1.3.6.1.4.1.390.2.4.15 integer read-only
Packets from self received.
                 alRipStatPktsQueued 1.3.6.1.4.1.390.2.4.16 integer read-only
Packets queued.
                 alRipStatFreeQueue 1.3.6.1.4.1.390.2.4.17 integer read-only
Free entries in the RIP processing queue.
                 alRipDynPktsRcvd 1.3.6.1.4.1.390.2.4.18 integer read-only
Packets Received.
                 alRipDynPktsXmitted 1.3.6.1.4.1.390.2.4.19 integer read-only
Packets Sent.
                 alRipDynReqsRcvd 1.3.6.1.4.1.390.2.4.20 integer read-only
Requests Received.
                 alRipDynRespRcvd 1.3.6.1.4.1.390.2.4.21 integer read-only
Responses Received.
                 alRipDynReqsXmitted 1.3.6.1.4.1.390.2.4.22 integer read-only
Requests Sent.
                 alRipDynRespXmitted 1.3.6.1.4.1.390.2.4.23 integer read-only
Responses Sent.
                 alRipDynRouteTimeOuts 1.3.6.1.4.1.390.2.4.24 integer read-only
Route Timeouts.
                 alRipDynShortPkts 1.3.6.1.4.1.390.2.4.25 integer read-only
Short packets received.
                 alRipDynBadVer 1.3.6.1.4.1.390.2.4.26 integer read-only
Bad version pkts received.
                 alRipDynBadZeroes 1.3.6.1.4.1.390.2.4.27 integer read-only
Bad zeroes received.
                 alRipDynBadSrcPort 1.3.6.1.4.1.390.2.4.28 integer read-only
Packets with bad Source port received.
                 alRipDynBadSrcIp 1.3.6.1.4.1.390.2.4.29 integer read-only
Packets with bad source IP address received.
                 alRipDynPktsSelf 1.3.6.1.4.1.390.2.4.30 integer read-only
Packets from self received.
                 alRipDynPktsQueued 1.3.6.1.4.1.390.2.4.31 integer read-only
Packets queued.
                 alRipDynFreeQueue 1.3.6.1.4.1.390.2.4.32 integer read-only
Free entries in the RIP processing queue.
                 alRipAccptFilTable 1.3.6.1.4.1.390.2.4.33 no-access
RIP Accept filter table
                       ripAccptFilEntry 1.3.6.1.4.1.390.2.4.33.1 no-access
RIP Accept filter entry
                           ripAccptFilNumber 1.3.6.1.4.1.390.2.4.33.1.1 integer read-write
Filter Number; Range 1-64
                           ripAccptFilAddr 1.3.6.1.4.1.390.2.4.33.1.2 ipaddress read-write
Valid network or subnet address
                           ripAccptFilMask 1.3.6.1.4.1.390.2.4.33.1.3 ipaddress read-write
Mask
                           ripAccptFilPort 1.3.6.1.4.1.390.2.4.33.1.4 integer read-write
Port number on which network should be accepted or not. Range 1-14. CVG This range will change for PH2??
                 alRipReportFilTable 1.3.6.1.4.1.390.2.4.34 no-access
RIP Report filter table
                       ripReportFilEntry 1.3.6.1.4.1.390.2.4.34.1 no-access
RIP Report filter entry
                           ripReportFilNumber 1.3.6.1.4.1.390.2.4.34.1.1 integer read-write
Filter Number; Range 1-64
                           ripReportFilAddr 1.3.6.1.4.1.390.2.4.34.1.2 ipaddress read-write
Valid network or subnet address
                           ripReportFilMask 1.3.6.1.4.1.390.2.4.34.1.3 ipaddress read-write
Mask
                           ripReportFilPort 1.3.6.1.4.1.390.2.4.34.1.4 integer read-write
Port number on which network should be reported or not. Port number range 1-14 CVG This range will probably change for PH2??.
             altcp 1.3.6.1.4.1.390.2.5
                 alTcpConnIdleTime 1.3.6.1.4.1.390.2.5.1 integer read-write
Time in minutes before sending keep-alives. The range is 5 to 30 minutes.
                 alTcpKeepAliveInt 1.3.6.1.4.1.390.2.5.2 integer read-write
Time interval in seconds between two successive keep-alive sends. The range is 30 to 240 seconds.
                 alTcpDisconnectInt 1.3.6.1.4.1.390.2.5.3 integer read-only
Time interval in seconds, before an idle connection is dropped. This equals to the sum of alTcpConnIdleTime plus eight times the alTcpKeepAliveInt interval.
                 alTcpShortSegRcvd 1.3.6.1.4.1.390.2.5.4 integer read-only
Number of short segments received.
                 alTcpStatsClear 1.3.6.1.4.1.390.2.5.5 integer read-write
When set to 1, clears the TCP stats.
                 alTcpConnTable 1.3.6.1.4.1.390.2.5.6 no-access
A table containing TCP connection-specific information.
                     alTcpConnEntry 1.3.6.1.4.1.390.2.5.6.1 no-access
Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state.
                         alTcpConnId 1.3.6.1.4.1.390.2.5.6.1.1 integer read-only
The connection Identifier by which a connection is addressed.
                         alTcpConnState 1.3.6.1.4.1.390.2.5.6.1.2 integer read-write
The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. Enumeration: 'synReceived': 4, 'established': 5, 'finWait2': 7, 'timeWait': 11, 'finWait1': 6, 'lastAck': 9, 'closeWait': 8, 'deleteTCB': 12, 'closed': 1, 'closing': 10, 'listen': 2, 'synSent': 3.
                         alTcpConnLocalAddress 1.3.6.1.4.1.390.2.5.6.1.3 ipaddress read-only
The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used.
                         alTcpConnLocalPort 1.3.6.1.4.1.390.2.5.6.1.4 integer read-only
The local port number for this TCP connection.
                         alTcpConnRemAddress 1.3.6.1.4.1.390.2.5.6.1.5 ipaddress read-only
The remote IP address for this TCP connection.
                         alTcpConnRemPort 1.3.6.1.4.1.390.2.5.6.1.6 integer read-only
The remote port number for this TCP connection.
                 alTcpFilTable 1.3.6.1.4.1.390.2.5.7 no-access
TCP filter table
                     tcpFilEntry 1.3.6.1.4.1.390.2.5.7.1 no-access
TCP filter entry
                         tcpFilNumber 1.3.6.1.4.1.390.2.5.7.1.1 integer read-write
Filter Number; Range 1-32
                         tcpFilSrcAddr 1.3.6.1.4.1.390.2.5.7.1.2 ipaddress read-write
Source address
                         tcpFilSrcMask 1.3.6.1.4.1.390.2.5.7.1.3 ipaddress read-write
Mask
                         tcpFilProtocol 1.3.6.1.4.1.390.2.5.7.1.4 integer read-write
tcp(1) or udp(2)
                         tcpFilDstPort 1.3.6.1.4.1.390.2.5.7.1.5 integer read-write
smtp(1000), telnet(2000), ftp(3000) or valid port Number
             alip 1.3.6.1.4.1.390.2.6
                 alArpTableClear 1.3.6.1.4.1.390.2.6.1 integer read-write
When set, clears the ARP table.
                 alArpAge 1.3.6.1.4.1.390.2.6.2 integer read-write
Timeout in minutes for aging ARP entries; when set to zero, set-arpage is turned off.
                 alArpStatReqsRcvd 1.3.6.1.4.1.390.2.6.3 integer read-only
Requests Received.
                 alArpStatRepliesRcvd 1.3.6.1.4.1.390.2.6.4 integer read-only
Replies Received.
                 alArpStatInvalidOpcodes 1.3.6.1.4.1.390.2.6.5 integer read-only
Invalid Opcodes Received.
                 alArpStatRequestsSent 1.3.6.1.4.1.390.2.6.6 integer read-only
Requests Sent.
                 alArpStatRepliesSent 1.3.6.1.4.1.390.2.6.7 integer read-only
Replies Sent.
                 alArpDynReqsRcvd 1.3.6.1.4.1.390.2.6.8 integer read-only
Requests Received.
                 alArpDynRepliesRcvd 1.3.6.1.4.1.390.2.6.9 integer read-only
Replies Received.
                 alArpDynInvalidOpcodes 1.3.6.1.4.1.390.2.6.10 integer read-only
Invalid Opcodes Received.
                 alArpDynRequestsSent 1.3.6.1.4.1.390.2.6.11 integer read-only
Requests Sent.
                 alArpDynRepliesSent 1.3.6.1.4.1.390.2.6.12 integer read-only
Replies Sent.
                 alArpProxyTable 1.3.6.1.4.1.390.2.6.13 no-access
Per port proxy arp enable/disable
                       arpProxyEntry 1.3.6.1.4.1.390.2.6.13.1 no-access
                           arpProxyPort 1.3.6.1.4.1.390.2.6.13.1.1 integer read-only
Port Number
                           arpProxyEnable 1.3.6.1.4.1.390.2.6.13.1.2 integer read-write
If set to Enable(1), enables proxy arp for arp requests received on the port identified by the instance of arpProxyPort. If set to Disable(0), it disables the proxy arp for arp requests received on the ports identified by the instance of arpProxyPort.
                 alIpTemplateTable 1.3.6.1.4.1.390.2.6.14 no-access
Per template information
                       ipTemplateEntry 1.3.6.1.4.1.390.2.6.14.1 no-access
                           ipTemplateNumber 1.3.6.1.4.1.390.2.6.14.1.1 integer read-write
The number of the template with which it is identified.
                           ipTemplateDelete 1.3.6.1.4.1.390.2.6.14.1.2 integer read-write
When set to Delete(1), this entry is deleted.
                           ipTemplateAction 1.3.6.1.4.1.390.2.6.14.1.3 integer read-write
Whether the packet being filtered should be forwarded or blocked Enumeration: 'forward': 1, 'block': 2.
                           ipTemplateSrcAddr 1.3.6.1.4.1.390.2.6.14.1.4 ipaddress read-write
The portion of the packet's source address specified by ipTemplateSrcMask is matched with this address.
                           ipTemplateSrcMask 1.3.6.1.4.1.390.2.6.14.1.5 ipaddress read-write
Source Mask. The portion specified by this mask is matched with source address.
                           ipTemplateDstAddr 1.3.6.1.4.1.390.2.6.14.1.6 ipaddress read-write
The portion of the packet's destination address specified by ipTemplateDstMask is matched with this address.
                           ipTemplateDstMask 1.3.6.1.4.1.390.2.6.14.1.7 ipaddress read-write
Destination mask. The portion specified by this mask is matched with destination address.
                           ipTemplateProtocol 1.3.6.1.4.1.390.2.6.14.1.8 integer read-write
Determines the type of packets that need to be filtered
                           ipTemplateOperator 1.3.6.1.4.1.390.2.6.14.1.9 displaystring read-write
Allowed only if the protocol field is tcp or udp.
                           ipTemplateDstPort 1.3.6.1.4.1.390.2.6.14.1.10 integer read-write
This is expressed as either a well-known protocol name or a well-known tcp or udp port number
                 alIpRuleTable 1.3.6.1.4.1.390.2.6.15 no-access
Per template information
                       ipRuleEntry 1.3.6.1.4.1.390.2.6.15.1 no-access
                           ipRuleNumber 1.3.6.1.4.1.390.2.6.15.1.1 integer read-write
The number of the rule with which it is identified.
                           ipRuleDelete 1.3.6.1.4.1.390.2.6.15.1.2 integer read-write
If set to 1 the entry is deleted.
                           ipRuleTemplates 1.3.6.1.4.1.390.2.6.15.1.3 displaystring read-write
The templates associated with the rule identified by the instance of ipRuleNumber.
                 ipAcsCtrlTable 1.3.6.1.4.1.390.2.6.16 no-access
Per port IP access control filters
                       ipAcsCtrlEntry 1.3.6.1.4.1.390.2.6.16.1 no-access
                           ipAcsCtrlPort 1.3.6.1.4.1.390.2.6.16.1.1 integer read-write
Port number of the port for which the source and destination access filter apply.
                           ipAcsCtrlDelete 1.3.6.1.4.1.390.2.6.16.1.2 integer read-write
If set to 1, the entry is deleted.
                           ipAcsCtrlSrcRule 1.3.6.1.4.1.390.2.6.16.1.3 integer read-write
Source IP access filter rule
                           ipAcsCtrlDstRule 1.3.6.1.4.1.390.2.6.16.1.4 integer read-write
Destination IP access filter rule
                 ipFilStatStatsTable 1.3.6.1.4.1.390.2.6.17 no-access
Per template static statistics -- stats from the beginning of the last system reboot.
                       ipFilStatStatsEntry 1.3.6.1.4.1.390.2.6.17.1 no-access
                           ipFilStatStatsTemplate 1.3.6.1.4.1.390.2.6.17.1.1 integer read-only
The template number for which the stats are displayed
                           ipFilStatStatsInPkts 1.3.6.1.4.1.390.2.6.17.1.2 integer read-only
The number of packets that matched the template identified by the instance of ipFilStatStatsTemplate. The template has to be a Source template.
                           ipFilStatStatsInBytes 1.3.6.1.4.1.390.2.6.17.1.3 integer read-only
The number of bytes that matched the template identified by the instance of ipFilStatStatsTemplate. The template has to be a Source template.
                           ipFilStatStatsOutPkts 1.3.6.1.4.1.390.2.6.17.1.4 integer read-only
The number of packets that matched the template identified by the instance of ipFilStatStatsTemplate. The template has to be a Destination template.
                           ipFilStatStatsOutBytes 1.3.6.1.4.1.390.2.6.17.1.5 integer read-only
The number of bytes that matched the template identified by the instance of ipFilStatStatsTemplate. The template has to be a Destination template.
                 ipFilDynStatsTable 1.3.6.1.4.1.390.2.6.18 no-access
Per template dynamic statistics -- stats from the beginning of the last clear.
                       ipFilDynStatsEntry 1.3.6.1.4.1.390.2.6.18.1 no-access
                           ipFilDynStatsTemplate 1.3.6.1.4.1.390.2.6.18.1.1 integer read-only
The template number for which the stats are displayed
                           ipFilDynStatsInPkts 1.3.6.1.4.1.390.2.6.18.1.2 integer read-only
The number of packets that matched the template identified by the instance of ipFilDynStatsTemplate. The template has to be a Source template.
                           ipFilDynStatsInBytes 1.3.6.1.4.1.390.2.6.18.1.3 integer read-only
The number of bytes that matched the template identified by the instance of ipFilDynStatsTemplate. The template has to be a Source template.
                           ipFilDynStatsOutPkts 1.3.6.1.4.1.390.2.6.18.1.4 integer read-only
The number of packets that matched the template identified by the instance of ipFilDynStatsTemplate. The template has to be a Destination template.
                           ipFilDynStatsOutBytes 1.3.6.1.4.1.390.2.6.18.1.5 integer read-only
The number of bytes that matched the template identified by the instance of ipFilDynStatsTemplate. The template has to be a Destination template.
                           ipFilDynStatsClear 1.3.6.1.4.1.390.2.6.18.1.6 integer read-write
Setting the value of 1, it will clear all the stats for the template identified by the instance of ipFilDynStatsTemplate.
                 alIpInterfaceTable 1.3.6.1.4.1.390.2.6.19 no-access
Interface table corresponding to the command - interface-table.
                       alIpInterfaceEntry 1.3.6.1.4.1.390.2.6.19.1 no-access
                           ipInterfaceNumber 1.3.6.1.4.1.390.2.6.19.1.1 integer read-write
                           ipInterfaceAddress 1.3.6.1.4.1.390.2.6.19.1.2 ipaddress read-write
                           ipInterfaceSubnetMask 1.3.6.1.4.1.390.2.6.19.1.3 ipaddress read-write
                           ipInterfaceMtu 1.3.6.1.4.1.390.2.6.19.1.4 integer read-write
                           ipInterfaceBroadCast 1.3.6.1.4.1.390.2.6.19.1.5 integer read-write
                           ipInterfaceState 1.3.6.1.4.1.390.2.6.19.1.6 integer read-write
                           ipInterfaceCost 1.3.6.1.4.1.390.2.6.19.1.7 integer read-write
                           ipInterfacePktsIn 1.3.6.1.4.1.390.2.6.19.1.8 integer read-only
                           ipInterfaceOctetsIn 1.3.6.1.4.1.390.2.6.19.1.9 integer read-only
                           ipInterfacePktsOut 1.3.6.1.4.1.390.2.6.19.1.10 integer read-only
                           ipInterfaceOctetsOut 1.3.6.1.4.1.390.2.6.19.1.11 integer read-only
                 alIpRtCacheTable 1.3.6.1.4.1.390.2.6.20 no-access
IP Route Cache for all ports
                       alIpRtCacheEntry 1.3.6.1.4.1.390.2.6.20.1 no-access
IP Route cache for each port
                           ipRtCachePort 1.3.6.1.4.1.390.2.6.20.1.1 integer read-write
                           ipRtCacheDstAddress 1.3.6.1.4.1.390.2.6.20.1.2 ipaddress read-write
                           ipRtCacheClear 1.3.6.1.4.1.390.2.6.20.1.3 integer read-write
Setting this to Clear(1), will clear the routecache for the port and Destination address identified by the instance of ipRtCachePort and ipRtCacheDstAddress.
             alat 1.3.6.1.4.1.390.2.7
             aldecnet 1.3.6.1.4.1.390.2.8
             alipx 1.3.6.1.4.1.390.2.9
             alsnmp 1.3.6.1.4.1.390.2.10