--************************************************************************ -- CITRIX-NetScaler-SD-WAN-MIB.txt: CITRIX -- -- Copyright (c) 2004-2016 by CITRIX Systems, Inc. -- All rights Reserved. -- --************************************************************************ CITRIX-NetScaler-SD-WAN-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, enterprises FROM SNMPv2-SMI Integer32, Counter32, Gauge32, Counter64, IpAddress, TimeTicks FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, PhysAddress, TruthValue, RowStatus, TimeStamp, AutonomousType, TestAndIncr FROM SNMPv2-TC; -- Citrix enterprise ID citrix OBJECT IDENTIFIER ::= { enterprises 3845 } -- sdWAN mib sdWANMIB MODULE-IDENTITY LAST-UPDATED "201709260000Z" ORGANIZATION "www.citrix.com" CONTACT-INFO " CITRIX, Inc. postal: 851 West Cypress Creek Road Fort Lauderdale, Florida 33309 United States" DESCRIPTION "The MIB module for managing the CITRIX NetScaler SD-WAN Appliance" ::= { citrix 31 } -- sdWANStatus mib sdWANStatusMIB OBJECT IDENTIFIER ::= { sdWANMIB 4 } -- -- Base assignments -- sdWANObjects OBJECT IDENTIFIER ::= { sdWANStatusMIB 2 } sdWANNotifs OBJECT IDENTIFIER ::= { sdWANStatusMIB 3 } -- -- -- sdWANConfiguration OBJECT IDENTIFIER ::= { sdWANObjects 1 } sdWANStatistics OBJECT IDENTIFIER ::= { sdWANObjects 2 } sdWANEvents OBJECT IDENTIFIER ::= { sdWANObjects 3 } -- -- Statistics sub-section. -- This contains information for the following. -- -- Appliances -- Ethernet Interfaces -- Routes -- Rules -- WAN Links -- Virtual Paths -- WANPaths -- WANClasses -- WANRules -- Internet Service -- InternetRules -- Intranet Service -- IntranetRules -- Passthrough Service -- RoutesV2 -- DynamicVirtualPaths -- DynamicWANPaths -- DynamicWANClasses -- DynamicWANRules -- -- Statistics for the Appliance object -- sdWANStatsAppliances OBJECT IDENTIFIER ::= { sdWANStatistics 12 } sdWANStatsApplianceScalars OBJECT IDENTIFIER ::= { sdWANStatsAppliances 1 } sdWANStatsApplianceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The string name for the appliance." ::= { sdWANStatsApplianceScalars 1 } sdWANStatsApplianceBytesSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of bytes sent for the appliance since the last time the NetScaler SD-WAN service was started." ::= { sdWANStatsApplianceScalars 2 } sdWANStatsAppliancePacketsSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of packets sent for the appliance since the last time the NetScaler SD-WAN service was started." ::= { sdWANStatsApplianceScalars 3 } sdWANStatsApplianceBytesReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of bytes received for the appliance since the last time the NetScaler SD-WAN service was started." ::= { sdWANStatsApplianceScalars 4 } sdWANStatsAppliancePacketsReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of packets received for the appliance since the last time the NetScaler SD-WAN service was started." ::= { sdWANStatsApplianceScalars 5 } sdWANStatsApplianceBytesDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of bytes dropped for the appliance since the last time the NetScaler SD-WAN service was started." ::= { sdWANStatsApplianceScalars 6 } sdWANStatsAppliancePacketsDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of packets dropped for the appliance since the last time the NetScaler SD-WAN service was started." ::= { sdWANStatsApplianceScalars 7 } sdWANStatsApplianceState OBJECT-TYPE SYNTAX INTEGER { undefined(0), -- Undefined state disabled(1), -- Disabled enabled(2) -- Enabled } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the appliance - whether or not it is enabled (passing traffic) or disabled." ::= { sdWANStatsApplianceScalars 8 } sdWANStatsApplianceHAState OBJECT-TYPE SYNTAX INTEGER { undefined(0), -- Undefined state notConfigured(1), -- HA not configured active(2), -- Active standby(3) -- Standby } MAX-ACCESS read-only STATUS current DESCRIPTION "The High Availability state of the appliance - whether or not it is the currently active appliance or the standby appliance." ::= { sdWANStatsApplianceScalars 9 } sdWANStatsApplianceSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The string representation of the serial number for the appliance." ::= { sdWANStatsApplianceScalars 10 } sdWANStatsApplianceOSVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The string representation of the OS Version." ::= { sdWANStatsApplianceScalars 11 } sdWANStatsApplianceSoftwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The string representation of the Software Version running on the appliance." ::= { sdWANStatsApplianceScalars 12 } sdWANStatsApplianceConfigCreatedOn OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Day and Time NetScaler SD-WAN Configuration was created. Only displayed on client when appliance is not disabled." ::= { sdWANStatsApplianceScalars 13 } sdWANStatsApplianceServiceUptime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time since the Virtual WAN Service was last initialized" ::= { sdWANStatsApplianceScalars 14 } sdWANStatsApplianceApplianceUptime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time since this Appliance was last initialized" ::= { sdWANStatsApplianceScalars 15 } -- -- Stats associated with Ethernet Interfaces -- sdWANStatsEthernetInterfaces OBJECT IDENTIFIER ::= { sdWANStatistics 13 } sdWANStatsEthernetInterfaceScalars OBJECT IDENTIFIER ::= { sdWANStatsEthernetInterfaces 1 } sdWANStatsNumEthernetInterfaces OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Ethernet interfaces." DEFVAL { 0 } ::= { sdWANStatsEthernetInterfaceScalars 1 } sdWANStatsEthernetInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF SdWANStatsEthernetInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of statistics for Ethernet Interface objects. Contains statistics counts for all the Ethernet Interfaces in the system. Counter data in this table is updated once a minute and is a cumulative count since the last time the NetScaler SD-WAN service was started." ::= { sdWANStatsEthernetInterfaces 2 } sdWANStatsEthernetInterfaceEntry OBJECT-TYPE SYNTAX SdWANStatsEthernetInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular Ethernet interface object." INDEX { sdWANStatsEthernetInterfaceIndex } ::= { sdWANStatsEthernetInterfaceTable 1 } SdWANStatsEthernetInterfaceEntry ::= SEQUENCE { sdWANStatsEthernetInterfaceIndex Integer32, sdWANStatsEthernetInterfaceIfIndex Integer32, sdWANStatsEthernetInterfaceName DisplayString, sdWANStatsEthernetInterfaceBytesSent Counter64, sdWANStatsEthernetInterfacePacketsSent Counter64, sdWANStatsEthernetInterfaceBytesReceived Counter64, sdWANStatsEthernetInterfacePacketsReceived Counter64, sdWANStatsEthernetInterfaceBytesDropped Counter64, sdWANStatsEthernetInterfacePacketsDropped Counter64 } sdWANStatsEthernetInterfaceIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Citrix Index value for the Ethernet interface." ::= { sdWANStatsEthernetInterfaceEntry 1 } sdWANStatsEthernetInterfaceIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique ifIndex value for the Ethernet interface. This can be used to reference information in the IF-MIB about this interface." ::= { sdWANStatsEthernetInterfaceEntry 2 } sdWANStatsEthernetInterfaceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name for the Ethernet interface. This is the name shown on the front panel of the appliance and used in the user interfaces (Web and CLI)." ::= { sdWANStatsEthernetInterfaceEntry 3 } sdWANStatsEthernetInterfaceBytesSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes sent for this Ethernet interface." ::= { sdWANStatsEthernetInterfaceEntry 4 } sdWANStatsEthernetInterfacePacketsSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets sent for this Ethernet interface." ::= { sdWANStatsEthernetInterfaceEntry 5 } sdWANStatsEthernetInterfaceBytesReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes received for this Ethernet interface." ::= { sdWANStatsEthernetInterfaceEntry 6 } sdWANStatsEthernetInterfacePacketsReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets received for this Ethernet interface." ::= { sdWANStatsEthernetInterfaceEntry 7 } sdWANStatsEthernetInterfaceBytesDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes dropped for this Ethernet interface." ::= { sdWANStatsEthernetInterfaceEntry 8 } sdWANStatsEthernetInterfacePacketsDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets dropped for this Ethernet interface." ::= { sdWANStatsEthernetInterfaceEntry 9 } -- -- Stats associated with Rules -- sdWANStatsRules OBJECT IDENTIFIER ::= { sdWANStatistics 14 } sdWANStatsRuleScalars OBJECT IDENTIFIER ::= { sdWANStatsRules 1 } sdWANStatsNumRules OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of rules in the system." DEFVAL { 0 } ::= { sdWANStatsRuleScalars 1 } sdWANStatsRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF SdWANStatsRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of statistics for rule objects. Contains statistics counts for all the rules in the system. Counter data in this table is updated once a minute and is a cumulative count since the last time the NetScaler SD-WAN service was started." ::= { sdWANStatsRules 2 } sdWANStatsRuleEntry OBJECT-TYPE SYNTAX SdWANStatsRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular route object." INDEX { sdWANStatsRuleIndex } ::= { sdWANStatsRuleTable 1 } SdWANStatsRuleEntry ::= SEQUENCE { sdWANStatsRuleIndex Integer32, sdWANStatsRuleID Integer32, sdWANStatsRuleApplicationName DisplayString, sdWANStatsRuleLANToWANHitCount Gauge32, sdWANStatsRuleWANToLANHitCount Gauge32, sdWANStatsRuleBytesSent Gauge32, sdWANStatsRulePacketsSent Gauge32, sdWANStatsRuleBytesReceived Gauge32, sdWANStatsRulePacketsReceived Gauge32, sdWANStatsRuleBytesDropped Gauge32, sdWANStatsRulePacketsDropped Gauge32, sdWANStatsRuleLastActiveNMinuteAgo TimeTicks } sdWANStatsRuleIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index value for the rule." ::= { sdWANStatsRuleEntry 1 } sdWANStatsRuleID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Citrix ID for the rule." ::= { sdWANStatsRuleEntry 2 } sdWANStatsRuleApplicationName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The optional string application name associated with this rule." ::= { sdWANStatsRuleEntry 3 } sdWANStatsRuleLANToWANHitCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of LAN to WAN packets that have hit this rule, measured over the past active minute." ::= { sdWANStatsRuleEntry 4 } sdWANStatsRuleWANToLANHitCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of WAN to LAN packets that have hit this rule, measured over the past active minute." ::= { sdWANStatsRuleEntry 5 } sdWANStatsRuleBytesSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of bytes sent that matched this rule, measured over the past active minute." ::= { sdWANStatsRuleEntry 6 } sdWANStatsRulePacketsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of packets sent that matched this rule, measured over the past active minute." ::= { sdWANStatsRuleEntry 7 } sdWANStatsRuleBytesReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of bytes received that matched this rule, measured over the past active minute." ::= { sdWANStatsRuleEntry 8 } sdWANStatsRulePacketsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of packets received that matched this rule, measured over the past active minute." ::= { sdWANStatsRuleEntry 9 } sdWANStatsRuleBytesDropped OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of bytes dropped that matched this rule, measured over the past active minute." ::= { sdWANStatsRuleEntry 10 } sdWANStatsRulePacketsDropped OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of packets dropped that matched this rule, measured over the past active minute." ::= { sdWANStatsRuleEntry 11 } sdWANStatsRuleLastActiveNMinuteAgo OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This rule was hit last N Minutes ago. If this field value is 0 and either sdWANStatsRuleBytesSent or sdWANStatsRuleBytesReceived is not zero, then that means that this rule is currently being used. The rule statistics contain the latest values. If this field is > 0, then the rule statistics is plateaued to show that this rule was used N minutes ago." ::= { sdWANStatsRuleEntry 12 } -- -- Stats associated with WAN Links -- sdWANStatsWANLinks OBJECT IDENTIFIER ::= { sdWANStatistics 15 } sdWANStatsWANLinkScalars OBJECT IDENTIFIER ::= { sdWANStatsWANLinks 1 } sdWANStatsNumWANLinks OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of WAN Links on this appliance." DEFVAL { 0 } ::= { sdWANStatsWANLinkScalars 1 } sdWANStatsWANLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF SdWANStatsWANLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of statistics for WAN Link objects. Contains statistics counts for all the WAN Links in the system. Counter data in this table is updated once a minute and is a cumulative count since the last time the WAN service was started." ::= { sdWANStatsWANLinks 2 } sdWANStatsWANLinkEntry OBJECT-TYPE SYNTAX SdWANStatsWANLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular WAN Link object." INDEX { sdWANStatsWANLinkIndex } ::= { sdWANStatsWANLinkTable 1 } SdWANStatsWANLinkEntry ::= SEQUENCE { sdWANStatsWANLinkIndex Integer32, sdWANStatsWANLinkID Integer32, sdWANStatsWANLinkName DisplayString, sdWANStatsWANLinkState INTEGER, sdWANStatsWANLinkBytesSent Counter64, sdWANStatsWANLinkPacketsSent Counter64, sdWANStatsWANLinkBytesReceived Counter64, sdWANStatsWANLinkPacketsReceived Counter64, sdWANStatsWANLinkBytesDropped Counter64, sdWANStatsWANLinkPacketsDropped Counter64 } sdWANStatsWANLinkIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index value for the WAN Link." ::= { sdWANStatsWANLinkEntry 1 } sdWANStatsWANLinkID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Citrix ID for the WAN Link." ::= { sdWANStatsWANLinkEntry 2 } sdWANStatsWANLinkName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name for the WAN Link." ::= { sdWANStatsWANLinkEntry 3 } sdWANStatsWANLinkState OBJECT-TYPE SYNTAX INTEGER { undefined(0), -- Undefined state disabled(1), -- Admin Disabled dead(2), -- Dead bad(3), -- Errors above threshold good(4) -- Passing traffic } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the virtual path." ::= { sdWANStatsWANLinkEntry 4 } sdWANStatsWANLinkBytesSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes sent for this WAN Link." ::= { sdWANStatsWANLinkEntry 5 } sdWANStatsWANLinkPacketsSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets sent for this WAN Link." ::= { sdWANStatsWANLinkEntry 6 } sdWANStatsWANLinkBytesReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes received for this WAN Link." ::= { sdWANStatsWANLinkEntry 7 } sdWANStatsWANLinkPacketsReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets received for this WAN Link." ::= { sdWANStatsWANLinkEntry 8 } sdWANStatsWANLinkBytesDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes dropped for this WAN Link." ::= { sdWANStatsWANLinkEntry 9 } sdWANStatsWANLinkPacketsDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets dropped for this WAN Link." ::= { sdWANStatsWANLinkEntry 10 } -- -- Stats associated with VirtualPaths -- sdWANStatsVPaths OBJECT IDENTIFIER ::= { sdWANStatistics 16 } sdWANStatsVPathScalars OBJECT IDENTIFIER ::= { sdWANStatsVPaths 1 } sdWANStatsNumVPaths OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VPaths." DEFVAL { 0 } ::= { sdWANStatsVPathScalars 1 } sdWANStatsVPathTable OBJECT-TYPE SYNTAX SEQUENCE OF SdWANStatsVPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of statistics for VPath objects. Contains statistics counts for all the VPaths in the system. Counter data in this table is updated once a minute and is a cumulative count since the last time the NetScaler SD-WAN service was started." ::= { sdWANStatsVPaths 2 } sdWANStatsVPathEntry OBJECT-TYPE SYNTAX SdWANStatsVPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular VPath object." INDEX { sdWANStatsVPathIndex } ::= { sdWANStatsVPathTable 1 } SdWANStatsVPathEntry ::= SEQUENCE { sdWANStatsVPathIndex Integer32, sdWANStatsVPathID Integer32, sdWANStatsVPathName DisplayString, sdWANStatsVPathState INTEGER, sdWANStatsVPathBytesSent Counter64, sdWANStatsVPathPacketsSent Counter64, sdWANStatsVPathBytesReceived Counter64, sdWANStatsVPathPacketsReceived Counter64, sdWANStatsVPathNumPaths Integer32, sdWANStatsVPathNumRules Integer32, sdWANStatsVPathSendBytesDropped Counter64, sdWANStatsVPathSendPacketsDropped Counter64, sdWANStatsVPathSendPacketsLost Counter64, sdWANStatsVPathSendPacketsOOO Counter64, sdWANStatsVPathSendBOWTms Gauge32, sdWANStatsVPathSendJitterms Gauge32, sdWANStatsVPathReceiveBytesDropped Counter64, sdWANStatsVPathReceivePacketsDropped Counter64, sdWANStatsVPathReceivePacketsLost Counter64, sdWANStatsVPathReceivePacketsOOO Counter64, sdWANStatsVPathReceiveBOWTms Gauge32, sdWANStatsVPathReceiveJitterms Gauge32 } sdWANStatsVPathIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index value for the VPath." ::= { sdWANStatsVPathEntry 1 } sdWANStatsVPathID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Citrix ID for the VPath." ::= { sdWANStatsVPathEntry 2 } sdWANStatsVPathName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name for the VPath." ::= { sdWANStatsVPathEntry 3 } sdWANStatsVPathState OBJECT-TYPE SYNTAX INTEGER { undefined(0), -- Undefined state disabled(1), -- Admin Disabled dead(2), -- Dead bad(3), -- Errors above threshold good(4) -- Passing traffic } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the virtual path." ::= { sdWANStatsVPathEntry 4 } sdWANStatsVPathBytesSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes sent for this VPath." ::= { sdWANStatsVPathEntry 5 } sdWANStatsVPathPacketsSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets sent for this VPath." ::= { sdWANStatsVPathEntry 6 } sdWANStatsVPathBytesReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes received for this VPath." ::= { sdWANStatsVPathEntry 7 } sdWANStatsVPathPacketsReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets received for this VPath." ::= { sdWANStatsVPathEntry 8 } sdWANStatsVPathNumPaths OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Paths associated with this virtual path - this is the number of rows in the sdWANStatsWANPathsTable for the current virtual path. Each virtual path can have a different number of paths associated with it." ::= { sdWANStatsVPathEntry 9 } sdWANStatsVPathNumRules OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Rules associated with this virtual path - this is the number of rows in the sdWANStatsWANRulesTable for the current virtual path. Each virtual path can have a different number of rules associated with it." ::= { sdWANStatsVPathEntry 10 } sdWANStatsVPathSendBytesDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of send bytes dropped for this VPath." ::= { sdWANStatsVPathEntry 11 } sdWANStatsVPathSendPacketsDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of send packets dropped for this VPath." ::= { sdWANStatsVPathEntry 12 } sdWANStatsVPathSendPacketsLost OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current total number of send packets lost for this VPath." ::= { sdWANStatsVPathEntry 13 } sdWANStatsVPathSendPacketsOOO OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current total number of send packets received out of order by the remote on this VPath." ::= { sdWANStatsVPathEntry 14 } sdWANStatsVPathSendBOWTms OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current best one-way time (BOWT) value (in milliseconds) in the send direction for this VPath." ::= { sdWANStatsVPathEntry 15 } sdWANStatsVPathSendJitterms OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current worst jitter value (in milliseconds) in the send direction for this VPath." ::= { sdWANStatsVPathEntry 16 } sdWANStatsVPathReceiveBytesDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of receive bytes dropped for this VPath." ::= { sdWANStatsVPathEntry 17 } sdWANStatsVPathReceivePacketsDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of receive packets dropped for this VPath." ::= { sdWANStatsVPathEntry 18 } sdWANStatsVPathReceivePacketsLost OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current total number of receive packets lost for this VPath." ::= { sdWANStatsVPathEntry 19 } sdWANStatsVPathReceivePacketsOOO OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current total number of received packets out of order on this VPath." ::= { sdWANStatsVPathEntry 20 } sdWANStatsVPathReceiveBOWTms OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current best one-way time (BOWT) value (in milliseconds) in the receive direction for this VPath." ::= { sdWANStatsVPathEntry 21 } sdWANStatsVPathReceiveJitterms OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current worst jitter value (in milliseconds) in the receive direction for this VPath." ::= { sdWANStatsVPathEntry 22 } -- -- Stats for Paths associated with VPaths -- sdWANStatsWANPaths OBJECT IDENTIFIER ::= { sdWANStatsVPaths 3 } sdWANStatsWANPathTable OBJECT-TYPE SYNTAX SEQUENCE OF SdWANStatsWANPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of statistics for VPath Path objects. Contains statistics counts for all the VPath Paths in the system. Counter data in this table is updated once a minute and is a cumulative count since the last time the NetScaler SD-WAN service was started. The number of virtual paths in this table is stored in sdWANStatsNumVPaths and the number of Paths for each virtual path is in the variable sdWANStatsVPathNumPaths which is in the sdWANStatsVPathTable and has a specific number of paths value for each virtual path index." ::= { sdWANStatsWANPaths 1 } sdWANStatsWANPathEntry OBJECT-TYPE SYNTAX SdWANStatsWANPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular VPath object." INDEX { sdWANStatsWANPathVPathIndex, sdWANStatsWANPathPathIndex } ::= { sdWANStatsWANPathTable 1 } SdWANStatsWANPathEntry ::= SEQUENCE { sdWANStatsWANPathVPathIndex Integer32, sdWANStatsWANPathPathIndex Integer32, sdWANStatsWANPathVPathID Integer32, sdWANStatsWANPathPathID Integer32, sdWANStatsWANPathName DisplayString, sdWANStatsWANPathState INTEGER, sdWANStatsWANPathBytesSent Counter64, sdWANStatsWANPathPacketsSent Counter64, sdWANStatsWANPathBytesReceived Counter64, sdWANStatsWANPathPacketsReceived Counter64, sdWANStatsWANPathBOWTms Gauge32, sdWANStatsWANPathJitterms Gauge32, sdWANStatsWANPathPacketsLost Counter64, sdWANStatsWANPathPacketsOOO Counter64 } sdWANStatsWANPathVPathIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index (VPath) value for the VPath Path." ::= { sdWANStatsWANPathEntry 1 } sdWANStatsWANPathPathIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index (Path) value for the VPath Path." ::= { sdWANStatsWANPathEntry 2 } sdWANStatsWANPathVPathID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Citrix ID (VPath) value for the VPath Path." ::= { sdWANStatsWANPathEntry 3 } sdWANStatsWANPathPathID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Citrix ID (Path) value for the VPath Path." ::= { sdWANStatsWANPathEntry 4 } sdWANStatsWANPathName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name for the VPath Path." ::= { sdWANStatsWANPathEntry 5 } sdWANStatsWANPathState OBJECT-TYPE SYNTAX INTEGER { undefined(0), -- Undefined state disabled(1), -- Admin Disabled dead(2), -- Dead bad(3), -- Errors above threshold good(4) -- Passing traffic } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the virtual path." ::= { sdWANStatsWANPathEntry 6 } sdWANStatsWANPathBytesSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes sent for this VPath Path." ::= { sdWANStatsWANPathEntry 7 } sdWANStatsWANPathPacketsSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets sent for this VPath Path." ::= { sdWANStatsWANPathEntry 8 } sdWANStatsWANPathBytesReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes received for this VPath Path." ::= { sdWANStatsWANPathEntry 9 } sdWANStatsWANPathPacketsReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets received for this VPath Path." ::= { sdWANStatsWANPathEntry 10 } sdWANStatsWANPathBOWTms OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current best one-way time (BOWT) value (in milliseconds) value for this VPath Path." ::= { sdWANStatsWANPathEntry 11 } sdWANStatsWANPathJitterms OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current best jitter value (in milliseconds) for this VPath Path." ::= { sdWANStatsWANPathEntry 12 } sdWANStatsWANPathPacketsLost OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current total number of packets lost for this VPath Path." ::= { sdWANStatsWANPathEntry 13 } sdWANStatsWANPathPacketsOOO OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current total number of out of order packets detected on this VPath Path." ::= { sdWANStatsWANPathEntry 14 } -- -- Stats for Classes associated with VPaths -- sdWANStatsWANClasses OBJECT IDENTIFIER ::= { sdWANStatsVPaths 4 } sdWANStatsWANClassTable OBJECT-TYPE SYNTAX SEQUENCE OF SdWANStatsWANClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of statistics for VPath Class objects. Contains statistics counts for all the VPath Classes in the system. Counter data in this table is updated once a minute and is a cumulative count since the last time the NetScaler SD-WAN service was started. The number of virtual path in this table is stored in sdWANStatsNumVPaths and the number of Classes for each virtual path is always 17." ::= { sdWANStatsWANClasses 1 } sdWANStatsWANClassEntry OBJECT-TYPE SYNTAX SdWANStatsWANClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular VPath object." INDEX { sdWANStatsWANClassVPathIndex, sdWANStatsWANClassClassIndex } ::= { sdWANStatsWANClassTable 1 } SdWANStatsWANClassEntry ::= SEQUENCE { sdWANStatsWANClassVPathIndex Integer32, sdWANStatsWANClassClassIndex Integer32, sdWANStatsWANClassVPathID Integer32, sdWANStatsWANClassClassID Integer32, sdWANStatsWANClassName DisplayString, sdWANStatsWANClassType INTEGER, sdWANStatsWANClassBytesSent Counter64, sdWANStatsWANClassPacketsSent Counter64, sdWANStatsWANClassBytesPending Counter64, sdWANStatsWANClassPacketsPending Counter64, sdWANStatsWANClassBytesDropped Counter64, sdWANStatsWANClassPacketsDropped Counter64 } sdWANStatsWANClassVPathIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index (VPath) value for the VPath Class." ::= { sdWANStatsWANClassEntry 1 } sdWANStatsWANClassClassIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index (Class) value for the VPath Class." ::= { sdWANStatsWANClassEntry 2 } sdWANStatsWANClassVPathID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The internal Citrix ID for the VPath object." ::= { sdWANStatsWANClassEntry 3 } sdWANStatsWANClassClassID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The internal Citrix ID for the Class object." ::= { sdWANStatsWANClassEntry 4 } sdWANStatsWANClassName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name for the VPath Class." ::= { sdWANStatsWANClassEntry 5 } sdWANStatsWANClassType OBJECT-TYPE SYNTAX INTEGER { realtime(1), interactive(2), bulk(3), unknown(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The name for the VPath Class." ::= { sdWANStatsWANClassEntry 6 } sdWANStatsWANClassBytesSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes sent for this VPath Class." ::= { sdWANStatsWANClassEntry 7 } sdWANStatsWANClassPacketsSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets sent for this VPath Class." ::= { sdWANStatsWANClassEntry 8 } sdWANStatsWANClassBytesPending OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes pending for this VPath Class." ::= { sdWANStatsWANClassEntry 9 } sdWANStatsWANClassPacketsPending OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets pending for this VPath Class." ::= { sdWANStatsWANClassEntry 10 } sdWANStatsWANClassBytesDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes dropped for this VPath Class." ::= { sdWANStatsWANClassEntry 11 } sdWANStatsWANClassPacketsDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets dropped for this VPath Class." ::= { sdWANStatsWANClassEntry 12 } -- -- Stats for Rules associated with VPaths -- sdWANStatsWANRules OBJECT IDENTIFIER ::= { sdWANStatsVPaths 5 } sdWANStatsWANRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF SdWANStatsWANRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of statistics for VPath Rule objects. Contains statistics counts for all the VPath Rules in the system. Counter data in this table is updated once a minute and is a cumulative count since the last time the NetScaler SD-WAN service was started. The number of virtual paths in this table is stored in sdWANStatsNumVPaths and the number of Rules for each virtual path is in the variable sdWANStatsVPathNumRules which is in the sdWANStatsVPathTable and has a specific number of rules value for each virtual path index." ::= { sdWANStatsWANRules 1 } sdWANStatsWANRuleEntry OBJECT-TYPE SYNTAX SdWANStatsWANRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular VPath object." INDEX { sdWANStatsWANRuleVPathIndex, sdWANStatsWANRuleRuleIndex } ::= { sdWANStatsWANRuleTable 1 } SdWANStatsWANRuleEntry ::= SEQUENCE { sdWANStatsWANRuleVPathIndex Integer32, sdWANStatsWANRuleRuleIndex Integer32, sdWANStatsWANRuleVPathID Integer32, sdWANStatsWANRuleRuleID Integer32, sdWANStatsWANRuleGlobalRuleIndex Integer32, sdWANStatsWANRuleApplicationName DisplayString, sdWANStatsWANRuleLANToWANHitCount Gauge32, sdWANStatsWANRuleWANToLANHitCount Gauge32, sdWANStatsWANRuleBytesSent Gauge32, sdWANStatsWANRulePacketsSent Gauge32, sdWANStatsWANRuleBytesReceived Gauge32, sdWANStatsWANRulePacketsReceived Gauge32, sdWANStatsWANRuleBytesDropped Gauge32, sdWANStatsWANRulePacketsDropped Gauge32, sdWANStatsWANRuleLastActiveNMinuteAgo TimeTicks } sdWANStatsWANRuleVPathIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index (VPath) value for the VPath Rule." ::= { sdWANStatsWANRuleEntry 1 } sdWANStatsWANRuleRuleIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index (Rule) value for the VPath Rule." ::= { sdWANStatsWANRuleEntry 2 } sdWANStatsWANRuleVPathID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Citrix ID (VPath) value for the VPath Rule." ::= { sdWANStatsWANRuleEntry 3 } sdWANStatsWANRuleRuleID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Citrix ID (Rule) value for the VPath Rule." ::= { sdWANStatsWANRuleEntry 4 } sdWANStatsWANRuleGlobalRuleIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of this rule in the sdWANStatsRuleTable." ::= { sdWANStatsWANRuleEntry 5 } sdWANStatsWANRuleApplicationName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The optional string application name associated with this rule." ::= { sdWANStatsWANRuleEntry 6 } sdWANStatsWANRuleLANToWANHitCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of times this rule has been hit for in the LAN to WAN direction, measured over the past active minute." ::= { sdWANStatsWANRuleEntry 7 } sdWANStatsWANRuleWANToLANHitCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of times this rule has been hit for in the WAN to LAN direction, measured over the past active minute." ::= { sdWANStatsWANRuleEntry 8 } sdWANStatsWANRuleBytesSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of bytes sent for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsWANRuleEntry 9 } sdWANStatsWANRulePacketsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of packets sent for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsWANRuleEntry 10 } sdWANStatsWANRuleBytesReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of bytes received for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsWANRuleEntry 11 } sdWANStatsWANRulePacketsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of packets received for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsWANRuleEntry 12 } sdWANStatsWANRuleBytesDropped OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of bytes dropped for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsWANRuleEntry 13 } sdWANStatsWANRulePacketsDropped OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of packets dropped for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsWANRuleEntry 14 } sdWANStatsWANRuleLastActiveNMinuteAgo OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This rule was hit last N Minutes ago. If this field value is 0 and either sdWANStatsWANRuleBytesSent or sdWANStatsWANRuleBytesReceived is not zero, then that means that this rule is currently being used. The rule statistics contain the latest values. If this field is > 0, then the rule statistics is plateaued to show that this rule was used N minutes ago." ::= { sdWANStatsWANRuleEntry 15 } -- -- Stats associated with Internet Service -- sdWANStatsInternet OBJECT IDENTIFIER ::= { sdWANStatistics 17 } sdWANStatsInternetScalars OBJECT IDENTIFIER ::= { sdWANStatsInternet 1 } sdWANStatsInternetBytesSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the bytes sent on this Internet service." DEFVAL { 0 } ::= { sdWANStatsInternetScalars 1 } sdWANStatsInternetPacketsSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the packets sent on this Internet service." DEFVAL { 0 } ::= { sdWANStatsInternetScalars 2 } sdWANStatsInternetBytesReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the bytes received on this Internet service." DEFVAL { 0 } ::= { sdWANStatsInternetScalars 3 } sdWANStatsInternetPacketsReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the packets received on this Internet service." DEFVAL { 0 } ::= { sdWANStatsInternetScalars 4 } sdWANStatsInternetBytesDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the bytes dropped on this Internet service." DEFVAL { 0 } ::= { sdWANStatsInternetScalars 5 } sdWANStatsInternetPacketsDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the packets dropped on this Internet service." DEFVAL { 0 } ::= { sdWANStatsInternetScalars 6 } sdWANStatsInternetNumRules OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Rules associated with the Internet service." DEFVAL { 0 } ::= { sdWANStatsInternetScalars 7 } sdWANStatsInternetRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF SdWANStatsInternetRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of statistics for Rules associated with the Internet service. Counter data in this table is updated once a minute and is a cumulative count since the last time the NetScaler SD-WAN service was started. The number of rules in this table is sdWANStatsInternetNumRules and there is an entry for each of them." ::= { sdWANStatsInternet 2 } sdWANStatsInternetRuleEntry OBJECT-TYPE SYNTAX SdWANStatsInternetRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular InternetRule object." INDEX { sdWANStatsInternetRuleIndex } ::= { sdWANStatsInternetRuleTable 1 } SdWANStatsInternetRuleEntry ::= SEQUENCE { sdWANStatsInternetRuleIndex Integer32, sdWANStatsInternetRuleID Integer32, sdWANStatsInternetRuleGlobalRuleIndex Integer32, sdWANStatsInternetRuleApplicationName DisplayString, sdWANStatsInternetRuleLANToWANHitCount Gauge32, sdWANStatsInternetRuleWANToLANHitCount Gauge32, sdWANStatsInternetRuleBytesSent Gauge32, sdWANStatsInternetRulePacketsSent Gauge32, sdWANStatsInternetRuleBytesReceived Gauge32, sdWANStatsInternetRulePacketsReceived Gauge32, sdWANStatsInternetRuleBytesDropped Gauge32, sdWANStatsInternetRulePacketsDropped Gauge32, sdWANStatsInternetRuleLastActiveNMinuteAgo TimeTicks } sdWANStatsInternetRuleIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index value for the InternetRule." ::= { sdWANStatsInternetRuleEntry 1 } sdWANStatsInternetRuleID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Citrix ID for the InternetRule." ::= { sdWANStatsInternetRuleEntry 2 } sdWANStatsInternetRuleGlobalRuleIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of this rule in the sdWANStatsRuleTable." ::= { sdWANStatsInternetRuleEntry 3 } sdWANStatsInternetRuleApplicationName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The optional string application name associated with this rule." ::= { sdWANStatsInternetRuleEntry 4 } sdWANStatsInternetRuleLANToWANHitCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of LAN to WAN packets that hit this rule, measured over the past active minute." ::= { sdWANStatsInternetRuleEntry 5 } sdWANStatsInternetRuleWANToLANHitCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of WAN to LAN packets that hit this rule, measured over the past active minute." ::= { sdWANStatsInternetRuleEntry 6 } sdWANStatsInternetRuleBytesSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of bytes sent for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsInternetRuleEntry 7 } sdWANStatsInternetRulePacketsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of bytes received for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsInternetRuleEntry 8 } sdWANStatsInternetRuleBytesReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of packets sent for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsInternetRuleEntry 9 } sdWANStatsInternetRulePacketsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of packets received for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsInternetRuleEntry 10 } sdWANStatsInternetRuleBytesDropped OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of bytes dropped for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsInternetRuleEntry 11 } sdWANStatsInternetRulePacketsDropped OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of packets dropped for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsInternetRuleEntry 12 } sdWANStatsInternetRuleLastActiveNMinuteAgo OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This rule was hit last N Minutes ago. If this field value is 0 and either sdWANStatsInternetRuleBytesSent or sdWANStatsInternetRuleBytesReceived is not zero, then that means that this rule is currently being used. The rule statistics contain the latest values. If this field is > 0, then the rule statistics is plateaued to show that this rule was used N minutes ago." ::= { sdWANStatsInternetRuleEntry 13 } -- -- Stats associated with Intranet Service -- sdWANStatsIntranet OBJECT IDENTIFIER ::= { sdWANStatistics 18 } sdWANStatsIntranetScalars OBJECT IDENTIFIER ::= { sdWANStatsIntranet 1 } sdWANStatsIntranetNumIntranetServices OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Intranet Services on this site." DEFVAL { 0 } ::= { sdWANStatsIntranetScalars 8 } sdWANStatsIntranetsTable OBJECT-TYPE SYNTAX SEQUENCE OF SdWANStatsIntranetsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of statistics for the Intranet services on this site. Counter data in this table is updated once a minute and is a cumulative count since the last time the NetScaler SD-WAN service was started." ::= { sdWANStatsIntranet 3 } sdWANStatsIntranetsEntry OBJECT-TYPE SYNTAX SdWANStatsIntranetsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular Intranets object." INDEX { sdWANStatsIntranetsIndex } ::= { sdWANStatsIntranetsTable 1 } SdWANStatsIntranetsEntry ::= SEQUENCE { sdWANStatsIntranetsIndex Integer32, sdWANStatsIntranetsID Integer32, sdWANStatsIntranetsName DisplayString, sdWANStatsIntranetsBytesSent Counter64, sdWANStatsIntranetsPacketsSent Counter64, sdWANStatsIntranetsBytesReceived Counter64, sdWANStatsIntranetsPacketsReceived Counter64, sdWANStatsIntranetsBytesDropped Counter64, sdWANStatsIntranetsPacketsDropped Counter64, sdWANStatsIntranetsNumRules Integer32, sdWANStatsIntranetsRoutingDomainName DisplayString } sdWANStatsIntranetsIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The intranet index." ::= { sdWANStatsIntranetsEntry 1 } sdWANStatsIntranetsID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The intranet id." ::= { sdWANStatsIntranetsEntry 2 } sdWANStatsIntranetsName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The intranet name." ::= { sdWANStatsIntranetsEntry 3 } sdWANStatsIntranetsBytesSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the bytes sent on this intranet service." ::= { sdWANStatsIntranetsEntry 4 } sdWANStatsIntranetsPacketsSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the packets sent on this intranet service." ::= { sdWANStatsIntranetsEntry 5 } sdWANStatsIntranetsBytesReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the bytes received on this intranet service." ::= { sdWANStatsIntranetsEntry 6 } sdWANStatsIntranetsPacketsReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets received on this intranet service." ::= { sdWANStatsIntranetsEntry 7 } sdWANStatsIntranetsBytesDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes dropped on this intranet service." ::= { sdWANStatsIntranetsEntry 8 } sdWANStatsIntranetsPacketsDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets dropped on this intranet service." ::= { sdWANStatsIntranetsEntry 9 } sdWANStatsIntranetsNumRules OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of rules associated with this specific Intranet service." ::= { sdWANStatsIntranetsEntry 10 } sdWANStatsIntranetsRoutingDomainName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The routing domain name. Each routing domain has its own set of interfaces and routing tables." ::= { sdWANStatsIntranetsEntry 11 } sdWANStatsIntranetRulesTable OBJECT-TYPE SYNTAX SEQUENCE OF SdWANStatsIntranetRulesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of statistics for Rules associated with the Intranet service. Counter data in this table is updated once a minute and is a cumulative count since the last time the NetScaler SD-WAN service was started. The number of rules in this table is sdWANStatsIntranetNumRules and there is an entry for each of them." ::= { sdWANStatsIntranet 4 } sdWANStatsIntranetRulesEntry OBJECT-TYPE SYNTAX SdWANStatsIntranetRulesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular IntranetRules object." INDEX { sdWANStatsIntranetRulesIntranetIndex, sdWANStatsIntranetRulesRuleIndex } ::= { sdWANStatsIntranetRulesTable 1 } SdWANStatsIntranetRulesEntry ::= SEQUENCE { sdWANStatsIntranetRulesIntranetIndex Integer32, sdWANStatsIntranetRulesRuleIndex Integer32, sdWANStatsIntranetRulesID Integer32, sdWANStatsIntranetRulesGlobalRuleIndex Integer32, sdWANStatsIntranetRulesIntranetName DisplayString, sdWANStatsIntranetRulesApplicationName DisplayString, sdWANStatsIntranetRulesLANToWANHitCount Gauge32, sdWANStatsIntranetRulesWANToLANHitCount Gauge32, sdWANStatsIntranetRulesBytesSent Gauge32, sdWANStatsIntranetRulesPacketsSent Gauge32, sdWANStatsIntranetRulesBytesReceived Gauge32, sdWANStatsIntranetRulesPacketsReceived Gauge32, sdWANStatsIntranetRulesBytesDropped Gauge32, sdWANStatsIntranetRulesPacketsDropped Gauge32, sdWANStatsIntranetRulesLastActiveNMinuteAgo TimeTicks } sdWANStatsIntranetRulesIntranetIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index value for the Intranet service." ::= { sdWANStatsIntranetRulesEntry 1 } sdWANStatsIntranetRulesRuleIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index value for the Rule corresponding to the current Intranet service in the IntranetRules." ::= { sdWANStatsIntranetRulesEntry 2 } sdWANStatsIntranetRulesID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Citrix ID for this Rule in the IntranetRules." ::= { sdWANStatsIntranetRulesEntry 3 } sdWANStatsIntranetRulesGlobalRuleIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of this rule in the sdWANStatsRuleTable." ::= { sdWANStatsIntranetRulesEntry 4 } sdWANStatsIntranetRulesIntranetName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The optional string name associated with this Intranet service." ::= { sdWANStatsIntranetRulesEntry 5 } sdWANStatsIntranetRulesApplicationName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The optional string application name associated with this rule." ::= { sdWANStatsIntranetRulesEntry 6 } sdWANStatsIntranetRulesLANToWANHitCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of LAN to WAN packets that hit this rule, measured over the past active minute." ::= { sdWANStatsIntranetRulesEntry 7 } sdWANStatsIntranetRulesWANToLANHitCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of WAN to LAN packets that hit this rule, measured over the past active minute." ::= { sdWANStatsIntranetRulesEntry 8 } sdWANStatsIntranetRulesBytesSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of bytes sent for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsIntranetRulesEntry 9 } sdWANStatsIntranetRulesPacketsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of bytes received for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsIntranetRulesEntry 10 } sdWANStatsIntranetRulesBytesReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of packets sent for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsIntranetRulesEntry 11 } sdWANStatsIntranetRulesPacketsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of packets received for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsIntranetRulesEntry 12 } sdWANStatsIntranetRulesBytesDropped OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of bytes dropped for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsIntranetRulesEntry 13 } sdWANStatsIntranetRulesPacketsDropped OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of packets dropped for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsIntranetRulesEntry 14 } sdWANStatsIntranetRulesLastActiveNMinuteAgo OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This rule was hit last N Minutes ago. If this field value is 0 and either sdWANStatsIntranetRulesBytesSent or sdWANStatsIntranetRulesBytesReceived is not zero, then that means that this rule is currently being used. The rule statistics contain the latest values. If this field is > 0, then the rule statistics is plateaued to show that this rule was used N minutes ago." ::= { sdWANStatsIntranetRulesEntry 15 } -- -- Stats associated with Passthrough Service -- sdWANStatsPassthrough OBJECT IDENTIFIER ::= { sdWANStatistics 19 } sdWANStatsPassthroughScalars OBJECT IDENTIFIER ::= { sdWANStatsPassthrough 1 } sdWANStatsPassthroughBytesSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the bytes sent on this Passthrough service." DEFVAL { 0 } ::= { sdWANStatsPassthroughScalars 1 } sdWANStatsPassthroughPacketsSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the packets sent on this Passthrough service." DEFVAL { 0 } ::= { sdWANStatsPassthroughScalars 2 } sdWANStatsPassthroughBytesReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the bytes received on this Passthrough service." DEFVAL { 0 } ::= { sdWANStatsPassthroughScalars 3 } sdWANStatsPassthroughPacketsReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the packets received on this Passthrough service." DEFVAL { 0 } ::= { sdWANStatsPassthroughScalars 4 } sdWANStatsPassthroughBytesDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the bytes dropped on this Passthrough service." DEFVAL { 0 } ::= { sdWANStatsPassthroughScalars 5 } sdWANStatsPassthroughPacketsDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the packets dropped on this Passthrough service." DEFVAL { 0 } ::= { sdWANStatsPassthroughScalars 6 } -- -- Stats associated with Routes Version 2 -- sdWANStatsRoutesV2 OBJECT IDENTIFIER ::= { sdWANStatistics 20 } sdWANStatsRouteScalars OBJECT IDENTIFIER ::= { sdWANStatsRoutesV2 1 } sdWANStatsNumRoutesV2 OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of routes in the system." DEFVAL { 0 } ::= { sdWANStatsRouteScalars 1 } sdWANStatsRouteTableV2 OBJECT-TYPE SYNTAX SEQUENCE OF SdWANStatsRouteEntryV2 MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of statistics for route objects. Contains statistics counts for all the routes in the system. Counter data in this table is updated once a minute and is a cumulative count since the last time the NetScaler SD-WAN service was started." ::= { sdWANStatsRoutesV2 2 } sdWANStatsRouteEntryV2 OBJECT-TYPE SYNTAX SdWANStatsRouteEntryV2 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular route object." INDEX { sdWANStatsRouteIndexV2 } ::= { sdWANStatsRouteTableV2 1 } SdWANStatsRouteEntryV2 ::= SEQUENCE { sdWANStatsRouteIndexV2 Integer32, sdWANStatsRouteNetworkAddr IpAddress, sdWANStatsRouteNetworkPrefix Integer32, sdWANStatsRouteGateway IpAddress, sdWANStatsRouteServiceType INTEGER, sdWANStatsRouteServiceID Integer32, sdWANStatsRouteServiceName DisplayString, sdWANStatsRouteReachable INTEGER, sdWANStatsRouteSiteName DisplayString, sdWANStatsRouteType INTEGER, sdWANStatsRouteNeighborDirect INTEGER, sdWANStatsRouteCost Integer32, sdWANStatsRouteHitCountV2 Counter64, sdWANStatsRouteEligible DisplayString, sdWANStatsRouteEligibilityType DisplayString, sdWANStatsRouteEligibilityValue DisplayString, sdWANStatsRouteProtocol INTEGER, sdWANStatsRouteRoutingDomainName DisplayString } sdWANStatsRouteIndexV2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index value for the route." ::= { sdWANStatsRouteEntryV2 1 } sdWANStatsRouteNetworkAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This is the destination IP Address." ::= { sdWANStatsRouteEntryV2 2 } sdWANStatsRouteNetworkPrefix OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Network Prefix indicate number of significant bits in the NetworkAddr field." ::= { sdWANStatsRouteEntryV2 3 } sdWANStatsRouteGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Gateway IP Address for Route." ::= { sdWANStatsRouteEntryV2 4 } sdWANStatsRouteServiceType OBJECT-TYPE SYNTAX INTEGER { discard(0), -- discard route passthrough(1), -- passthrough route internet(2), -- internet route multicast(3), -- multicast route intranet(4), -- intranet route virtualpath(5), -- virtual path route langretunnel(6), -- lan gre tunnel route lanipsectunnel(7),-- lan ipsec tunnel route local(8), -- local route iphost(9) -- host route } MAX-ACCESS read-only STATUS current DESCRIPTION "Service Type for Route." ::= { sdWANStatsRouteEntryV2 5 } sdWANStatsRouteServiceID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Citrix ID for the Service ID. meaningful for service type virtual path and intranet." ::= { sdWANStatsRouteEntryV2 6 } sdWANStatsRouteServiceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Service Name in meaning format." ::= { sdWANStatsRouteEntryV2 7 } sdWANStatsRouteReachable OBJECT-TYPE SYNTAX INTEGER { no(0), -- route not reachable yes(1), -- route reachable na(2) -- not applicable i.e. passthrough } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate whether route is reachable." ::= { sdWANStatsRouteEntryV2 8 } sdWANStatsRouteSiteName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Destination NetScaler SD-WAN Site Name for VPath Routes." ::= { sdWANStatsRouteEntryV2 9 } sdWANStatsRouteType OBJECT-TYPE SYNTAX INTEGER { static(0), -- static route dynamic(1), -- dynamic route dynamicVPath(2) -- dynamic virtual path route } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate whether route is static, dynamic, or part of dynamic virtual path route." ::= { sdWANStatsRouteEntryV2 10 } sdWANStatsRouteNeighborDirect OBJECT-TYPE SYNTAX INTEGER { na(0), -- static route directNeighbor (1), -- dynamic route, learned from neighbor indirectNeighbor (2) -- dynamic route, learned from in-direct } MAX-ACCESS read-only STATUS current DESCRIPTION "If route is learned from another NetScaler SD-WAN Site, route is neighbor's direct route. Otherwise, neighbor learned route from its neighbor. Field is only applicable for dynamic routes." ::= { sdWANStatsRouteEntryV2 11 } sdWANStatsRouteCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Route Cost." ::= { sdWANStatsRouteEntryV2 12 } sdWANStatsRouteHitCountV2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of packets that have hit this route." ::= { sdWANStatsRouteEntryV2 13 } sdWANStatsRouteEligible OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "When eligiblility type and eligibility and value are specified for this route, this route is only available for use when the conditions specified is up. If eligibility fields are not specified, then this route is always eligible." ::= { sdWANStatsRouteEntryV2 14 } sdWANStatsRouteEligibilityType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Use route only when either a specified path or gateway or both are available." ::= { sdWANStatsRouteEntryV2 15 } sdWANStatsRouteEligibilityValue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Either the name of the path or gateway IP or both." ::= { sdWANStatsRouteEntryV2 16 } sdWANStatsRouteProtocol OBJECT-TYPE SYNTAX INTEGER { na(0), -- static or learned through snmp bgp(1), -- bgp protocol ospf(2), -- ospf protocol vw(3) -- vw protocol } MAX-ACCESS read-only STATUS current DESCRIPTION "The Routing Protocol." ::= { sdWANStatsRouteEntryV2 17 } sdWANStatsRouteRoutingDomainName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The routing domain name. Each routing domain has its own set of interfaces and routing tables." ::= { sdWANStatsRouteEntryV2 18 } -- -- Stats associated with Dynamic VPaths -- sdWANStatsDynamicVPaths OBJECT IDENTIFIER ::= { sdWANStatistics 21 } sdWANStatsDynamicVPathScalars OBJECT IDENTIFIER ::= { sdWANStatsDynamicVPaths 1 } sdWANStatsNumDynamicVPaths OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Dynamic VPaths." DEFVAL { 0 } ::= { sdWANStatsDynamicVPathScalars 1 } sdWANStatsDynamicVPathTable OBJECT-TYPE SYNTAX SEQUENCE OF SdWANStatsDynamicVPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of statistics for Dynamic VPath objects. Contains statistics counts for all the Dynamic VPaths in the system. Counter data in this table is updated once a minute and is a cumulative count since the last time the NetScaler SD-WAN service was started. Dynamic VPaths can be added and removed." ::= { sdWANStatsDynamicVPaths 2 } sdWANStatsDynamicVPathEntry OBJECT-TYPE SYNTAX SdWANStatsDynamicVPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular Dynamic VPath object." INDEX { sdWANStatsDynamicVPathIndex } ::= { sdWANStatsDynamicVPathTable 1 } SdWANStatsDynamicVPathEntry ::= SEQUENCE { sdWANStatsDynamicVPathIndex Integer32, sdWANStatsDynamicVPathID Integer32, sdWANStatsDynamicVPathName DisplayString, sdWANStatsDynamicVPathState INTEGER, sdWANStatsDynamicVPathTimeSinceCreation Counter64, sdWANStatsDynamicVPathBytesSent Counter64, sdWANStatsDynamicVPathPacketsSent Counter64, sdWANStatsDynamicVPathSendBytesDropped Counter64, sdWANStatsDynamicVPathSendPacketsDropped Counter64, sdWANStatsDynamicVPathSendPacketsLost Counter64, sdWANStatsDynamicVPathSendPacketsOOO Counter64, sdWANStatsDynamicVPathSendBOWTms Gauge32, sdWANStatsDynamicVPathSendJitterms Gauge32, sdWANStatsDynamicVPathBytesReceived Counter64, sdWANStatsDynamicVPathPacketsReceived Counter64, sdWANStatsDynamicVPathReceiveBytesDropped Counter64, sdWANStatsDynamicVPathReceivePacketsDropped Counter64, sdWANStatsDynamicVPathReceivePacketsLost Counter64, sdWANStatsDynamicVPathReceivePacketsOOO Counter64, sdWANStatsDynamicVPathReceiveBOWTms Gauge32, sdWANStatsDynamicVPathReceiveJitterms Gauge32, sdWANStatsDynamicVPathNumPaths Integer32, sdWANStatsDynamicVPathNumRules Integer32 } sdWANStatsDynamicVPathIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index value for the Dynamic VPath." ::= { sdWANStatsDynamicVPathEntry 1 } sdWANStatsDynamicVPathID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Citrix ID for the Dynamic VPath." ::= { sdWANStatsDynamicVPathEntry 2 } sdWANStatsDynamicVPathName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name for the Dynamic VPath." ::= { sdWANStatsDynamicVPathEntry 3 } sdWANStatsDynamicVPathState OBJECT-TYPE SYNTAX INTEGER { undefined(0), -- Undefined state disabled(1), -- Admin Disabled dead(2), -- Dead bad(3), -- Errors above threshold good(4) -- Passing traffic } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the dynamic virtual path." ::= { sdWANStatsDynamicVPathEntry 4 } sdWANStatsDynamicVPathTimeSinceCreation OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since the dynamic virtual path has been created." ::= { sdWANStatsDynamicVPathEntry 5 } sdWANStatsDynamicVPathBytesSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes sent for this Dynamic VPath." ::= { sdWANStatsDynamicVPathEntry 6 } sdWANStatsDynamicVPathPacketsSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets sent for this Dynamic VPath." ::= { sdWANStatsDynamicVPathEntry 7 } sdWANStatsDynamicVPathSendBytesDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of send bytes dropped for this Dynamic VPath." ::= { sdWANStatsDynamicVPathEntry 8 } sdWANStatsDynamicVPathSendPacketsDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of send packets dropped for this Dynamic VPath." ::= { sdWANStatsDynamicVPathEntry 9 } sdWANStatsDynamicVPathSendPacketsLost OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current total number of send packets lost for this Dynamic VPath." ::= { sdWANStatsDynamicVPathEntry 10 } sdWANStatsDynamicVPathSendPacketsOOO OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current total number of send packets received out of order by the remote on this Dynamic VPath." ::= { sdWANStatsDynamicVPathEntry 11 } sdWANStatsDynamicVPathSendBOWTms OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current best one-way time (BOWT) value (in milliseconds) in the send direction for this Dynamic VPath." ::= { sdWANStatsDynamicVPathEntry 12 } sdWANStatsDynamicVPathSendJitterms OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current worst jitter value (in milliseconds) in the send direction for this Dynamic VPath." ::= { sdWANStatsDynamicVPathEntry 13 } sdWANStatsDynamicVPathBytesReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes received for this Dynamic VPath." ::= { sdWANStatsDynamicVPathEntry 14 } sdWANStatsDynamicVPathPacketsReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets received for this Dynamic VPath." ::= { sdWANStatsDynamicVPathEntry 15 } sdWANStatsDynamicVPathReceiveBytesDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of receive bytes dropped for this Dynamic VPath." ::= { sdWANStatsDynamicVPathEntry 16 } sdWANStatsDynamicVPathReceivePacketsDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of receive packets dropped for this Dynamic VPath." ::= { sdWANStatsDynamicVPathEntry 17 } sdWANStatsDynamicVPathReceivePacketsLost OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current total number of receive packets lost for this Dynamic VPath." ::= { sdWANStatsDynamicVPathEntry 18 } sdWANStatsDynamicVPathReceivePacketsOOO OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current total number of received packets out of order on this Dynamic VPath." ::= { sdWANStatsDynamicVPathEntry 19 } sdWANStatsDynamicVPathReceiveBOWTms OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current best one-way time (BOWT) value (in milliseconds) in the receive direction for this Dynamic VPath." ::= { sdWANStatsDynamicVPathEntry 20 } sdWANStatsDynamicVPathReceiveJitterms OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current worst jitter value (in milliseconds) in the receive direction for this Dynamic VPath." ::= { sdWANStatsDynamicVPathEntry 21 } sdWANStatsDynamicVPathNumPaths OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Paths associated with this virtual path - this is the number of rows in the sdWANStatsDynamicWANPathsTable for the current virtual path. Each dynamic virtual path can have a different number of paths associated with it." ::= { sdWANStatsDynamicVPathEntry 22 } sdWANStatsDynamicVPathNumRules OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Rules associated with this virtual path - this is the number of rows in the sdWANStatsDynamicWANRulesTable for the current virtual path. Each dynamic virtual path can have a different number of rules associated with it." ::= { sdWANStatsDynamicVPathEntry 23 } -- -- Stats for Paths associated with Dynamic VPaths -- sdWANStatsDynamicWANPaths OBJECT IDENTIFIER ::= { sdWANStatsDynamicVPaths 3 } sdWANStatsDynamicWANPathTable OBJECT-TYPE SYNTAX SEQUENCE OF SdWANStatsDynamicWANPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of statistics for Dynamic VPath Path objects. Contains statistics counts for all the Dynamic VPath Paths in the system. Counter data in this table is updated once a minute and is a cumulative count since the time the VPath was added. The number of virtual path in this table is stored in sdWANStatsDynamicNumVPaths and the number of Paths for each dynamic virtual path is in the variable sdWANStatsDynamicVPathNumPaths which is in the sdWANStatsDynamicVPathTable and has a specific number of paths value for each dynamic virtual path index." ::= { sdWANStatsDynamicWANPaths 1 } sdWANStatsDynamicWANPathEntry OBJECT-TYPE SYNTAX SdWANStatsDynamicWANPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular Dynamic VPath object." INDEX { sdWANStatsDynamicWANPathVPathIndex, sdWANStatsDynamicWANPathPathIndex } ::= { sdWANStatsDynamicWANPathTable 1 } SdWANStatsDynamicWANPathEntry ::= SEQUENCE { sdWANStatsDynamicWANPathVPathIndex Integer32, sdWANStatsDynamicWANPathPathIndex Integer32, sdWANStatsDynamicWANPathVPathID Integer32, sdWANStatsDynamicWANPathPathID Integer32, sdWANStatsDynamicWANPathName DisplayString, sdWANStatsDynamicWANPathState INTEGER, sdWANStatsDynamicWANPathBytesSent Counter64, sdWANStatsDynamicWANPathPacketsSent Counter64, sdWANStatsDynamicWANPathBytesReceived Counter64, sdWANStatsDynamicWANPathPacketsReceived Counter64, sdWANStatsDynamicWANPathBytesDropped Counter64, sdWANStatsDynamicWANPathPacketsDropped Counter64, sdWANStatsDynamicWANPathBOWTms Gauge32, sdWANStatsDynamicWANPathJitterms Gauge32, sdWANStatsDynamicWANPathPacketsLost Counter64, sdWANStatsDynamicWANPathPacketsOOO Counter64 } sdWANStatsDynamicWANPathVPathIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index (VPath) value for the Dynamic VPath Path." ::= { sdWANStatsDynamicWANPathEntry 1 } sdWANStatsDynamicWANPathPathIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index (Path) value for the Dynamic VPath Path." ::= { sdWANStatsDynamicWANPathEntry 2 } sdWANStatsDynamicWANPathVPathID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Citrix ID (VPath) value for the Dynamic VPath Path." ::= { sdWANStatsDynamicWANPathEntry 3 } sdWANStatsDynamicWANPathPathID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Citrix ID (Path) value for the Dynamic VPath Path." ::= { sdWANStatsDynamicWANPathEntry 4 } sdWANStatsDynamicWANPathName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name for the Dynamic VPath Path." ::= { sdWANStatsDynamicWANPathEntry 5 } sdWANStatsDynamicWANPathState OBJECT-TYPE SYNTAX INTEGER { undefined(0), -- Undefined state disabled(1), -- Admin Disabled dead(2), -- Dead bad(3), -- Errors above threshold good(4) -- Passing traffic } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the dynamic virtual path path." ::= { sdWANStatsDynamicWANPathEntry 6 } sdWANStatsDynamicWANPathBytesSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes sent for this Dynamic VPath Path." ::= { sdWANStatsDynamicWANPathEntry 7 } sdWANStatsDynamicWANPathPacketsSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets sent for this Dynamic VPath Path." ::= { sdWANStatsDynamicWANPathEntry 8 } sdWANStatsDynamicWANPathBytesReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes received for this Dynamic VPath Path." ::= { sdWANStatsDynamicWANPathEntry 9 } sdWANStatsDynamicWANPathPacketsReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets received for this Dynamic VPath Path." ::= { sdWANStatsDynamicWANPathEntry 10 } sdWANStatsDynamicWANPathBytesDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes dropped for this Dynamic VPath Path." ::= { sdWANStatsDynamicWANPathEntry 11 } sdWANStatsDynamicWANPathPacketsDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets dropped for this Dynamic VPath Path." ::= { sdWANStatsDynamicWANPathEntry 12 } sdWANStatsDynamicWANPathBOWTms OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current best one-way time (BOWT) value (in milliseconds) value for this Dynamic VPath Path." ::= { sdWANStatsDynamicWANPathEntry 13 } sdWANStatsDynamicWANPathJitterms OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current best jitter value (in milliseconds) for this Dynamic VPath Path." ::= { sdWANStatsDynamicWANPathEntry 14 } sdWANStatsDynamicWANPathPacketsLost OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current total number of packets lost for this Dynamic VPath Path." ::= { sdWANStatsDynamicWANPathEntry 15 } sdWANStatsDynamicWANPathPacketsOOO OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current total number of out of order packets detected on this Dynamic VPath Path." ::= { sdWANStatsDynamicWANPathEntry 16 } -- -- Stats for Classes associated with VPaths -- sdWANStatsDynamicWANClasses OBJECT IDENTIFIER ::= { sdWANStatsDynamicVPaths 4 } sdWANStatsDynamicWANClassTable OBJECT-TYPE SYNTAX SEQUENCE OF SdWANStatsDynamicWANClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of statistics for Dynamic VPath Class objects. Contains statistics counts for all the Dynamic VPath Classes in the system. Counter data in this table is updated once a minute and is a cumulative count since the virtual path has been added. The number of virtual path in this table is stored in sdWANStatsNumDynamicVPaths and the number of Classes for each virtual path is always 17." ::= { sdWANStatsDynamicWANClasses 1 } sdWANStatsDynamicWANClassEntry OBJECT-TYPE SYNTAX SdWANStatsDynamicWANClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular Dynamic VPath object." INDEX { sdWANStatsDynamicWANClassVPathIndex, sdWANStatsDynamicWANClassClassIndex } ::= { sdWANStatsDynamicWANClassTable 1 } SdWANStatsDynamicWANClassEntry ::= SEQUENCE { sdWANStatsDynamicWANClassVPathIndex Integer32, sdWANStatsDynamicWANClassClassIndex Integer32, sdWANStatsDynamicWANClassVPathID Integer32, sdWANStatsDynamicWANClassClassID Integer32, sdWANStatsDynamicWANClassName DisplayString, sdWANStatsDynamicWANClassType INTEGER, sdWANStatsDynamicWANClassBytesSent Counter64, sdWANStatsDynamicWANClassPacketsSent Counter64, sdWANStatsDynamicWANClassBytesPending Counter64, sdWANStatsDynamicWANClassPacketsPending Counter64, sdWANStatsDynamicWANClassBytesDropped Counter64, sdWANStatsDynamicWANClassPacketsDropped Counter64 } sdWANStatsDynamicWANClassVPathIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index (VPath) value for the Dynamic VPath Class." ::= { sdWANStatsDynamicWANClassEntry 1 } sdWANStatsDynamicWANClassClassIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index (Class) value for the Dynamic VPath Class." ::= { sdWANStatsDynamicWANClassEntry 2 } sdWANStatsDynamicWANClassVPathID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The internal Citrix ID for the Dynamic VPath object." ::= { sdWANStatsDynamicWANClassEntry 3 } sdWANStatsDynamicWANClassClassID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The internal Citrix ID for the Dynamic VPath Class object." ::= { sdWANStatsDynamicWANClassEntry 4 } sdWANStatsDynamicWANClassName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name for the Dynamic VPath Class." ::= { sdWANStatsDynamicWANClassEntry 5 } sdWANStatsDynamicWANClassType OBJECT-TYPE SYNTAX INTEGER { realtime(1), interactive(2), bulk(3), unknown(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the Dynamic VPath Class." ::= { sdWANStatsDynamicWANClassEntry 6 } sdWANStatsDynamicWANClassBytesSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes sent for this Dynamic VPath Class." ::= { sdWANStatsDynamicWANClassEntry 7 } sdWANStatsDynamicWANClassPacketsSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets sent for this Dynamic VPath Class." ::= { sdWANStatsDynamicWANClassEntry 8 } sdWANStatsDynamicWANClassBytesPending OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes pending for this Dynamic VPath Class." ::= { sdWANStatsDynamicWANClassEntry 9 } sdWANStatsDynamicWANClassPacketsPending OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets pending for this Dynamic VPath Class." ::= { sdWANStatsDynamicWANClassEntry 10 } sdWANStatsDynamicWANClassBytesDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes dropped for this Dynamic VPath Class." ::= { sdWANStatsDynamicWANClassEntry 11 } sdWANStatsDynamicWANClassPacketsDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets dropped for this Dynamic VPath Class." ::= { sdWANStatsDynamicWANClassEntry 12 } -- -- Stats for Rules associated with Dynamic VPaths -- sdWANStatsDynamicWANRules OBJECT IDENTIFIER ::= { sdWANStatsDynamicVPaths 5 } sdWANStatsDynamicWANRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF SdWANStatsDynamicWANRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of statistics for Dynamic VPath Rule objects. Contains statistics counts for all the Dynamic VPath Rules in the system. Counter data in this table is updated once a minute and is a cumulative count since the time that the virtual path has been added. The number of virtual paths in this table is stored in sdWANStatsNumDynamicVPaths and the number of Rules for each virtual path is in the variable sdWANStatsDynamicVPathNumRules which is in the sdWANStatsDynamicVPathTable and has a specific number of rules value for each virtual path index." ::= { sdWANStatsDynamicWANRules 1 } sdWANStatsDynamicWANRuleEntry OBJECT-TYPE SYNTAX SdWANStatsDynamicWANRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular Dynamic VPath object." INDEX { sdWANStatsDynamicWANRuleVPathIndex, sdWANStatsDynamicWANRuleRuleIndex } ::= { sdWANStatsDynamicWANRuleTable 1 } SdWANStatsDynamicWANRuleEntry ::= SEQUENCE { sdWANStatsDynamicWANRuleVPathIndex Integer32, sdWANStatsDynamicWANRuleRuleIndex Integer32, sdWANStatsDynamicWANRuleVPathID Integer32, sdWANStatsDynamicWANRuleRuleID Integer32, sdWANStatsDynamicWANRuleGlobalRuleIndex Integer32, sdWANStatsDynamicWANRuleApplicationName DisplayString, sdWANStatsDynamicWANRuleLANToWANHitCount Gauge32, sdWANStatsDynamicWANRuleWANToLANHitCount Gauge32, sdWANStatsDynamicWANRuleBytesSent Gauge32, sdWANStatsDynamicWANRulePacketsSent Gauge32, sdWANStatsDynamicWANRuleBytesReceived Gauge32, sdWANStatsDynamicWANRulePacketsReceived Gauge32, sdWANStatsDynamicWANRuleBytesDropped Gauge32, sdWANStatsDynamicWANRulePacketsDropped Gauge32, sdWANStatsDynamicWANRuleLastActiveNMinuteAgo TimeTicks } sdWANStatsDynamicWANRuleVPathIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index (VPath) value for the Dynamic VPath Rule." ::= { sdWANStatsDynamicWANRuleEntry 1 } sdWANStatsDynamicWANRuleRuleIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index (Rule) value for the Dynamic VPath Rule." ::= { sdWANStatsDynamicWANRuleEntry 2 } sdWANStatsDynamicWANRuleVPathID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Citrix ID (VPath) value for the Dynamic VPath Rule." ::= { sdWANStatsDynamicWANRuleEntry 3 } sdWANStatsDynamicWANRuleRuleID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Citrix ID (Rule) value for the Dynamic VPath Rule." ::= { sdWANStatsDynamicWANRuleEntry 4 } sdWANStatsDynamicWANRuleGlobalRuleIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of this rule in the sdWANStatsRuleTable." ::= { sdWANStatsDynamicWANRuleEntry 5 } sdWANStatsDynamicWANRuleApplicationName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The optional string application name associated with this dynamic virtual path rule." ::= { sdWANStatsDynamicWANRuleEntry 6 } sdWANStatsDynamicWANRuleLANToWANHitCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of times this rule has been hit for in the LAN to WAN direction, measured over the past active minute." ::= { sdWANStatsDynamicWANRuleEntry 7 } sdWANStatsDynamicWANRuleWANToLANHitCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of times this rule has been hit for in the WAN to LAN direction, measured over the past active minute." ::= { sdWANStatsDynamicWANRuleEntry 8 } sdWANStatsDynamicWANRuleBytesSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of bytes sent for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsDynamicWANRuleEntry 9 } sdWANStatsDynamicWANRulePacketsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of bytes received for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsDynamicWANRuleEntry 10 } sdWANStatsDynamicWANRuleBytesReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of packets sent for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsDynamicWANRuleEntry 11 } sdWANStatsDynamicWANRulePacketsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of packets received for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsDynamicWANRuleEntry 12 } sdWANStatsDynamicWANRuleBytesDropped OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of bytes dropped for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsDynamicWANRuleEntry 13 } sdWANStatsDynamicWANRulePacketsDropped OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the number of packets dropped for packets that matched this rule, measured over the past active minute." ::= { sdWANStatsDynamicWANRuleEntry 14 } sdWANStatsDynamicWANRuleLastActiveNMinuteAgo OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This rule was hit last N Minutes ago. If this field value is 0 and either sdWANStatsDynamicWANRuleBytesSent or sdWANStatsDynamicWANRuleBytesReceived is not zero, then that means that this rule is currently being used. The rule statistics contain the latest values. If this field is > 0, then the rule statistics is plateaued to show that this rule was used N minutes ago." ::= { sdWANStatsDynamicWANRuleEntry 15 } -- -- Stats associated with Arp -- sdWANStatsArp OBJECT IDENTIFIER ::= { sdWANStatistics 22 } sdWANStatsArpScalars OBJECT IDENTIFIER ::= { sdWANStatsArp 1 } sdWANStatsNumArpEntries OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Arp entries." DEFVAL { 0 } ::= { sdWANStatsArpScalars 1 } sdWANStatsArpTable OBJECT-TYPE SYNTAX SEQUENCE OF SdWANStatsArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of statistics for Arp entry objects. Contains statistics counts for all the Arp entries in the system. Counter data in this table is updated once a minute." ::= { sdWANStatsArp 2 } sdWANStatsArpEntry OBJECT-TYPE SYNTAX SdWANStatsArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing all the information for a ARP entry object." INDEX { sdWANStatsArpID } ::= { sdWANStatsArpTable 1 } SdWANStatsArpEntry ::= SEQUENCE { sdWANStatsArpID Integer32, sdWANStatsArpIfIndex DisplayString, sdWANStatsArpVlanTag Counter64, sdWANStatsArpIpAddr IpAddress, sdWANStatsArpPhysAddr PhysAddress, sdWANStatsArpState DisplayString, sdWANStatsArpType DisplayString, sdWANStatsArpReplyAgeMs Counter64 } sdWANStatsArpID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Citrix Index value for the Arp entry." ::= { sdWANStatsArpEntry 1 } sdWANStatsArpIfIndex OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The interface name corresponding to the Arp entry. This is the name shown on the front panel of the appliance and used in the user interfaces (Web and CLI)." ::= { sdWANStatsArpEntry 2 } sdWANStatsArpVlanTag OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID associated with the Arp entry." ::= { sdWANStatsArpEntry 3 } sdWANStatsArpIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address mapping for the physical address." ::= { sdWANStatsArpEntry 4 } sdWANStatsArpPhysAddr OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination MAC address in a frame to which this entry's filtering information applies." ::= { sdWANStatsArpEntry 5 } sdWANStatsArpState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the Arp entry." ::= { sdWANStatsArpEntry 6 } sdWANStatsArpType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The type of Arp entry describes whether it is persistent or end-user. " ::= { sdWANStatsArpEntry 7 } sdWANStatsArpReplyAgeMs OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The age of arp reply we received in milliseconds." ::= { sdWANStatsArpEntry 8 } -- -- Stats associated with LAN GRE Tunnels -- sdWANStatsLanGRETunnels OBJECT IDENTIFIER ::= { sdWANStatistics 23 } sdWANStatsLanGRETunnelScalars OBJECT IDENTIFIER ::= { sdWANStatsLanGRETunnels 1 } sdWANStatsNumLanGRETunnels OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of LAN-side GRE Tunnels." DEFVAL { 0 } ::= { sdWANStatsLanGRETunnelScalars 1 } sdWANStatsLanGRETunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF SdWANStatsLanGRETunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of statistics for LAN-side GRE tunnel objects. Contains statistics counts and state for all the LAN-side GRE tunnels in the system. Counter data in this table is updated once a minute and is a cumulative count since the last time the NetScaler SD-WAN service was started." ::= { sdWANStatsLanGRETunnels 2 } sdWANStatsLanGRETunnelEntry OBJECT-TYPE SYNTAX SdWANStatsLanGRETunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular LAN-side GRE tunnel object." INDEX { sdWANStatsLanGRETunnelIndex } ::= { sdWANStatsLanGRETunnelTable 1 } SdWANStatsLanGRETunnelEntry ::= SEQUENCE { sdWANStatsLanGRETunnelIndex Integer32, sdWANStatsLanGRETunnelName DisplayString, sdWANStatsLanGRETunnelState DisplayString, sdWANStatsLanGRETunnelKeepaliveRequestSent Counter64, sdWANStatsLanGRETunnelKeepaliveReplyReceived Counter64, sdWANStatsLanGRETunnelKeepaliveReplySent Counter64, sdWANStatsLanGRETunnelPacketsSent Counter64, sdWANStatsLanGRETunnelBytesSent Counter64, sdWANStatsLanGRETunnelPacketsSentDropped Counter64, sdWANStatsLanGRETunnelPacketsSentFragmented Counter64, sdWANStatsLanGRETunnelBytesSentDropped Counter64, sdWANStatsLanGRETunnelPacketsReceived Counter64, sdWANStatsLanGRETunnelBytesReceived Counter64, sdWANStatsLanGRETunnelPacketsReceivedDropped Counter64, sdWANStatsLanGRETunnelBytesReceivedDropped Counter64, sdWANStatsLanGRETunnelRoutingDomainName DisplayString } sdWANStatsLanGRETunnelIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Citrix Index value for the LAN-side GRE tunnel." ::= { sdWANStatsLanGRETunnelEntry 1 } sdWANStatsLanGRETunnelName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name for the LAN-side GRE tunnel. This is the tunnel IP adddress of the configured tunnel." ::= { sdWANStatsLanGRETunnelEntry 2 } sdWANStatsLanGRETunnelState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the LAN-side GRE tunnel. This can be up or down." ::= { sdWANStatsLanGRETunnelEntry 3 } sdWANStatsLanGRETunnelKeepaliveRequestSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of keepalive request packets sent for this LAN-side GRE tunnel." ::= { sdWANStatsLanGRETunnelEntry 4 } sdWANStatsLanGRETunnelKeepaliveReplyReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of keepalive reply packets received for this LAN-side GRE tunnel." ::= { sdWANStatsLanGRETunnelEntry 5 } sdWANStatsLanGRETunnelKeepaliveReplySent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of keepalive reply packets sent for this LAN-side GRE tunnel." ::= { sdWANStatsLanGRETunnelEntry 6 } sdWANStatsLanGRETunnelPacketsSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets sent for this LAN-side GRE tunnel." ::= { sdWANStatsLanGRETunnelEntry 7 } sdWANStatsLanGRETunnelBytesSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes sent for this LAN-side GRE tunnel." ::= { sdWANStatsLanGRETunnelEntry 8 } sdWANStatsLanGRETunnelPacketsSentDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets failed to sent for this LAN-side GRE tunnel." ::= { sdWANStatsLanGRETunnelEntry 9 } sdWANStatsLanGRETunnelBytesSentDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes fail to sent for this LAN-side GRE tunnel." ::= { sdWANStatsLanGRETunnelEntry 10 } sdWANStatsLanGRETunnelPacketsSentFragmented OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets fragmented before sent for this LAN-side GRE tunnel." ::= { sdWANStatsLanGRETunnelEntry 11 } sdWANStatsLanGRETunnelPacketsReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets received for this LAN-side GRE tunnel." ::= { sdWANStatsLanGRETunnelEntry 12 } sdWANStatsLanGRETunnelBytesReceived OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes received for this LAN-side GRE tunnel." ::= { sdWANStatsLanGRETunnelEntry 13 } sdWANStatsLanGRETunnelPacketsReceivedDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets dropped after received for this LAN-side GRE tunnel." ::= { sdWANStatsLanGRETunnelEntry 14 } sdWANStatsLanGRETunnelBytesReceivedDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of bytes dropped after received for this LAN-side GRE tunnel." ::= { sdWANStatsLanGRETunnelEntry 15 } sdWANStatsLanGRETunnelRoutingDomainName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The routing domain name. Each routing domain has its own set of interfaces and routing tables." ::= { sdWANStatsLanGRETunnelEntry 16 } -- -- Events sub-section - contains a table with -- the current event database and up to the -- latest 1000 events in the system. -- -- Events Objects -- Events Scalars -- Events Table -- -- -- Some Textual conventions used in the events -- SdWANEventObjectTypeEnum ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes an enumeration of values used to represent the severity of an event generated by the NetScaler SD-WAN Appliance." SYNTAX INTEGER { undefined(1), service(2), virtualpath(3), wanlink(4), wanpath(5), harddisk(6), fan(7), vwanappliance(8), vwuser(9), powersupply(10), configupdate(11), softwareupdate(12), proxyarp(13), ethernet(14), watchdog(15), dynamicvirtualpath(16), lantowanpath(17), wantolanpath(18), appliancesettingsupdate(19), discoveredmtu(20), wanlinkcongestion(21), usagecongestion(22), gretunnel(23), ipsectunnel(24), vwcentersystem(1001), vwcenteruser(1002), vwcenterstorage(1003), vwcenterdatabase(1004), vwcenterconnectiontovirtualwan(1005) } SdWANEventSeverityEnum ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes an enumeration of values used to represent the severity of an event generated by the NetScaler SD-WAN Appliance." SYNTAX INTEGER { debug(1), info(2), notice(3), warning(4), error(5), critical(6), alert(7), emergency(8) } SdWANEventStateEnum ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes an enumeration of values used to represent the current state of the object that generated the event or trap in the NetScaler SD-WAN Appliance." SYNTAX INTEGER { undefined(1), disabled(2), dead(3), bad(4), good(5), warning(6), error(7), restart(8), reboot(9), active(10), standby(11), success(12), failure(13), enabled(14), pending(15), created(16), removed(17), systemerror(18), activeha(19), standbyha(20), activemcn(21), standbymcn(22), congested(23), uncongested(24), iplearned(25), ipreleased(26), ipexpired(27), ipgwnorsp(28), iprcvdnak(29), ipdetecteddup(30), ipdhcpsnorsp(31), rollback(32), usage0(33), usage1(34), usage2(35), usage3(36), thresholdok(1001), thresholdexceeded(1002), pollingthresholdok(1003), pollingthresholdexceeded(1004), start(1005), stop(1006), mismatch(1007), statserror(1008) } sdWANEventScalars OBJECT IDENTIFIER ::= { sdWANEvents 1 } sdWANNumEvents OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of Events in the system." DEFVAL { 0 } ::= { sdWANEventScalars 1 } sdWANEventTable OBJECT-TYPE SYNTAX SEQUENCE OF SdWANEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the latest set of events that have been generated by the sdWAN system." ::= { sdWANEvents 2 } sdWANEventEntry OBJECT-TYPE SYNTAX SdWANEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information describing an event that occurred in the system." INDEX { sdWANEventIndex } ::= { sdWANEventTable 1 } SdWANEventEntry ::= SEQUENCE { sdWANEventIndex Integer32, sdWANEventID Integer32, sdWANEventObjectID Integer32, sdWANEventObjectName DisplayString, sdWANEventObjectType SdWANEventObjectTypeEnum, sdWANEventTime DisplayString, sdWANEventType SdWANEventStateEnum, sdWANEventSeverity SdWANEventSeverityEnum, sdWANEventDescription DisplayString } sdWANEventIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than zero, for each event. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization." ::= { sdWANEventEntry 1 } sdWANEventID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, used for the internal identification of the event. This ID will match the ID used in the other User Interfaces." ::= { sdWANEventEntry 2 } sdWANEventObjectID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of the object associated with the event." ::= { sdWANEventEntry 3 } sdWANEventObjectName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A String representing the object that generated the event." ::= { sdWANEventEntry 4 } sdWANEventObjectType OBJECT-TYPE SYNTAX SdWANEventObjectTypeEnum MAX-ACCESS read-only STATUS current DESCRIPTION "An enumerated value representing the object type of the object that generated the event." ::= { sdWANEventEntry 5 } sdWANEventTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The localtime on the appliance as a String when the event occurred." ::= { sdWANEventEntry 6 } sdWANEventType OBJECT-TYPE SYNTAX SdWANEventStateEnum MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the event - basically an enumeration of State transitions that can occur in the appliance that will generate an event." ::= { sdWANEventEntry 7 } sdWANEventSeverity OBJECT-TYPE SYNTAX SdWANEventSeverityEnum MAX-ACCESS read-only STATUS current DESCRIPTION "The severity of the event." ::= { sdWANEventEntry 8 } sdWANEventDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A string description of the event." ::= { sdWANEventEntry 9 } -- -- Trap definitions -- sdWANEventNotification NOTIFICATION-TYPE OBJECTS { sdWANEventIndex, sdWANEventID, sdWANEventObjectID, sdWANEventObjectName, sdWANEventObjectType, sdWANEventTime, sdWANEventType, sdWANEventSeverity, sdWANEventDescription } STATUS current DESCRIPTION "Trap sent when an event occurs in a NetScaler SD-WAN appliance. These events can be from any of several sdWANEventObjectType object types in the system, and can represent a state transition or error condition in the sdWANEventType." ::= { sdWANNotifs 1 } sdWANNetworkEventNotification NOTIFICATION-TYPE OBJECTS { sdWANNetworkEventSiteName, sdWANEventID, sdWANEventObjectID, sdWANEventObjectName, sdWANEventObjectType, sdWANEventTime, sdWANEventType, sdWANEventSeverity, sdWANEventDescription } STATUS current DESCRIPTION "Trap sent from the network management/ monitoring system. These events can be from any of the appliances in the network being managed." ::= { sdWANNotifs 2 } sdWANNetworkEventScalars OBJECT IDENTIFIER ::= { sdWANEvents 3 } sdWANNetworkEventSiteName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, used for the identification of the site that is the source of the event." ::= { sdWANNetworkEventScalars 1 } -- -- END