ZYXEL-LAG-MIB: View SNMP OID List / Download MIB

VENDOR: ZYXEL COMMUNICATIONS CORP.


 Home MIB: ZYXEL-LAG-MIB
Download as:   
SNMPv2-CONF, ZYXEL-ES-SMI, SNMPv2-SMI, P-BRIDGE-MIB, BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zyxelLinkAggregation 1.3.6.1.4.1.890.1.15.3.42
The subtree for link aggregation
       zyxelAggregationSetup 1.3.6.1.4.1.890.1.15.3.42.1
           zyAggregationState 1.3.6.1.4.1.890.1.15.3.42.1.1 enabledstatus read-write
Enable/Disable link aggregation control protocol.
           zyAggregationSysPriority 1.3.6.1.4.1.890.1.15.3.42.1.2 integer read-write
The system number is to set the priority of an active port using link aggregation control protocol. The smaller the number, the higher the priority level.
           zyxelAggregationGroupTable 1.3.6.1.4.1.890.1.15.3.42.1.3 no-access
The table contains aggregation group configuration.
               zyxelAggregationGroupEntry 1.3.6.1.4.1.890.1.15.3.42.1.3.1 no-access
An entry contains aggregation group configuration.
                   zyAggregationGroupIndex 1.3.6.1.4.1.890.1.15.3.42.1.3.1.1 integer no-access
Index of link aggregation group.
                   zyAggregationGroupState 1.3.6.1.4.1.890.1.15.3.42.1.3.1.2 enabledstatus read-write
Enable/Disable link aggregation control protocol on a special group.
                   zyAggregationGroupDynamicState 1.3.6.1.4.1.890.1.15.3.42.1.3.1.3 enabledstatus read-write
Enable/Disable dynamic link aggregation control protocol on a special group.
                   zyAggregationGroupCriteria 1.3.6.1.4.1.890.1.15.3.42.1.3.1.4 integer read-write
Outgoing traffic distribution type. Packets from the same source and/or to the same destination are sent over the same link within the trunk. By default, the switch uses the srcDstMac distribution type. If the switch is behind a router, the packet's destination or source MAC address will be changed. In this case, set the switch to distribute traffic based on its IP address to make sure port trunking can work properly. Enumeration: 'srcDstIp': 6, 'dstIp': 5, 'srcMac': 1, 'dstMac': 2, 'srcIp': 4, 'srcDstMac': 3.
           zyxelAggregationPortTable 1.3.6.1.4.1.890.1.15.3.42.1.4 no-access
The table contains aggregation port configuration.
               zyxelAggregationPortEntry 1.3.6.1.4.1.890.1.15.3.42.1.4.1 no-access
An entry contains aggregation port configuration.
                   zyAggregationPortGroup 1.3.6.1.4.1.890.1.15.3.42.1.4.1.1 integer read-write
Trunk group which a port belongs. Enumeration: 't14': 14, 't15': 15, 't16': 16, 't17': 17, 't10': 10, 't11': 11, 't12': 12, 't13': 13, 't18': 18, 't19': 19, 'none': 0, 't8': 8, 't9': 9, 't6': 6, 't7': 7, 't4': 4, 't5': 5, 't2': 2, 't3': 3, 't1': 1, 't21': 21, 't20': 20, 't23': 23, 't22': 22, 't24': 24.
                   zyAggregationPortDynamicStateTimeout 1.3.6.1.4.1.890.1.15.3.42.1.4.1.2 integer read-write
This timeout is the time interval bEtween the individual port exchanges of LACP packets in order to check that the peer port in the trunk group is still up.
           zyAggregationAutoLacpState 1.3.6.1.4.1.890.1.15.3.42.1.5 enabledstatus read-write
Enable/Disable Automatic link aggregation control protocol.
       zyxelAggregationStatus 1.3.6.1.4.1.890.1.15.3.42.2
           zyAggregationAutoLacpTable 1.3.6.1.4.1.890.1.15.3.42.2.1 no-access
The table contains auto-lacp port configuration.
               zyAggregationAutoLacpEntry 1.3.6.1.4.1.890.1.15.3.42.2.1.1 no-access
An entry contains auto-lacp port configuration.
                   zyAggregationAutoLacpTrunkGroup 1.3.6.1.4.1.890.1.15.3.42.2.1.1.1 integer read-only
Trunk group which a port belongs. Enumeration: 't14': 14, 't15': 15, 't16': 16, 't17': 17, 't10': 10, 't11': 11, 't12': 12, 't13': 13, 't18': 18, 't19': 19, 'none': 0, 't8': 8, 't9': 9, 't6': 6, 't7': 7, 't4': 4, 't5': 5, 't2': 2, 't3': 3, 't1': 1, 't21': 21, 't20': 20, 't23': 23, 't22': 22, 't24': 24.
                   zyAggregationAutoLacpRemoteChassisId 1.3.6.1.4.1.890.1.15.3.42.2.1.1.2 displaystring read-only
This is the chassis id of the remote device.
                   zyAggregationAutoLacpRemotePort 1.3.6.1.4.1.890.1.15.3.42.2.1.1.3 integer read-only
This is the connected port of the remote device.