ZYXEL-ARP-MIB: View SNMP OID List / Download MIB

VENDOR: ZYXEL COMMUNICATIONS CORP.


 Home MIB: ZYXEL-ARP-MIB
Download as:   
SNMPv2-CONF, ZYXEL-ES-SMI, SNMPv2-SMI, BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zyxelArp 1.3.6.1.4.1.890.1.15.3.11
The subtree for arp
       zyxelArpSetup 1.3.6.1.4.1.890.1.15.3.11.1
           zyxelArpLearningPortTable 1.3.6.1.4.1.890.1.15.3.11.1.1 no-access
The table contains ARP learning port configuration.
               zyxelArpLearningPortEntry 1.3.6.1.4.1.890.1.15.3.11.1.1.1 no-access
An entry contains ARP learning port configuration.
                   zyArpLearningPortMode 1.3.6.1.4.1.890.1.15.3.11.1.1.1.1 integer read-write
The ARP learning mode the switch uses on the port. Enumeration: 'arpRequest': 2, 'arpReply': 0, 'gratuitousArp': 1.
           zyArpAgingTime 1.3.6.1.4.1.890.1.15.3.11.1.2 integer read-write
The number of seconds which learned arp are held.
           zyStaticArpMaxNumberOfArps 1.3.6.1.4.1.890.1.15.3.11.1.3 integer read-only
The maximum number of static ARP entries that can be created.
           zyxelStaticArpTable 1.3.6.1.4.1.890.1.15.3.11.1.4 no-access
The table contains static ARP configuration.
               zyxelStaticArpEntry 1.3.6.1.4.1.890.1.15.3.11.1.4.1 no-access
An entry contains static ARP configuration.
                   zyStaticArpIpAddrress 1.3.6.1.4.1.890.1.15.3.11.1.4.1.1 ipaddress no-access
This parameter specifies the source IP address of this entry.
                   zyStaticArpMacAddress 1.3.6.1.4.1.890.1.15.3.11.1.4.1.2 macaddress no-access
This parameter specifies the MAC address assigned to the IP address in this entry.
                   zyStaticArpVlan 1.3.6.1.4.1.890.1.15.3.11.1.4.1.3 integer no-access
This parameter specifies the VLAN identification nember.
                   zyStaticArpPort 1.3.6.1.4.1.890.1.15.3.11.1.4.1.4 integer no-access
This parameter specifies the port where the ARP entry entered in the previous field.
                   zyStaticArpRowStatus 1.3.6.1.4.1.890.1.15.3.11.1.4.1.5 rowstatus read-only
This object allow static ARP entries to be create and deleted from static ARP table.
       zyxelArpStatus 1.3.6.1.4.1.890.1.15.3.11.2
           zyxelArpTable 1.3.6.1.4.1.890.1.15.3.11.2.1 no-access
The table contains ARP information.
               zyxelArpEntry 1.3.6.1.4.1.890.1.15.3.11.2.1.1 no-access
An entry contains ARP information.
                   zyArpIpAddress 1.3.6.1.4.1.890.1.15.3.11.2.1.1.1 ipaddress no-access
This is the learned IP address of a device connected to a switch port with the corresponding MAC address below.
                   zyArpVid 1.3.6.1.4.1.890.1.15.3.11.2.1.1.2 integer no-access
This is the VLAN to which the device belongs.
                   zyArpMacAddress 1.3.6.1.4.1.890.1.15.3.11.2.1.1.3 macaddress read-only
This is the MAC address of the device with the corresponding IP address above.
                   zyArpPort 1.3.6.1.4.1.890.1.15.3.11.2.1.1.4 integer read-only
This is the port to which the device belongs.
                   zyArpType 1.3.6.1.4.1.890.1.15.3.11.2.1.1.5 integer read-only
This show whether the MAC address is dynamic (learned by the switch) or static (manually entered). Enumeration: 'dynamic': 2, 'static': 1.