ZXR10-ROUTE-MAP-MIB: View SNMP OID List / Download MIB

VENDOR: ZHONGXING TELECOM CO.,LTD. (ABBR. ZTE)


 Home MIB: ZXR10-ROUTE-MAP-MIB
Download as:   
SNMPv2-CONF, ZXR10-SMI, SNMPv2-SMI, SNMPv2-TC, IPV6-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zxr10RMAPMIB 1.3.6.1.4.1.3902.3.6000.604
The MIB module to describe the RMAP protocol.
         zxr10RMAPGlobalObjects 1.3.6.1.4.1.3902.3.6000.604.1
         zxr10RMAPObjects 1.3.6.1.4.1.3902.3.6000.604.2
             zxr10RMAPRuleObjects 1.3.6.1.4.1.3902.3.6000.604.2.1
                 zxr10RMAPNameTable 1.3.6.1.4.1.3902.3.6000.604.2.1.1 no-access
Route-map Name Table
                     zxr10RMAPNameEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.1.1 no-access
Route-map Name
                         zxr10RMAPName 1.3.6.1.4.1.3902.3.6000.604.2.1.1.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                         zxr10RMAPSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.1.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                         zxr10RMAPAction 1.3.6.1.4.1.3902.3.6000.604.2.1.1.1.3 rmappermitdeny read-only
permit:Match success deny :Match failed
                         zxr10RMAPRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.1.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchAspathTable 1.3.6.1.4.1.3902.3.6000.604.2.1.2 no-access
Route-map Match Aspath Table
                     zxr10RMAPMatchAspathEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.2.1 no-access
Match BGP as-path list
                         zxr10RMAPAspathName 1.3.6.1.4.1.3902.3.6000.604.2.1.2.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                         zxr10RMAPAspathSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.2.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                         zxr10RMAPAspathNo 1.3.6.1.4.1.3902.3.6000.604.2.1.2.1.3 integer32 no-access
Aspath List Number. The range of config is 0 to 199. Each sequence has 10 match aspath items at most
                         zxr10RMAPAspathMatchName 1.3.6.1.4.1.3902.3.6000.604.2.1.2.1.4 displaystring no-access
Name of Aspath (0-31 characters)
                         zxr10RMAPAspathRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.2.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchCommunityTable 1.3.6.1.4.1.3902.3.6000.604.2.1.3 no-access
Route-map Match Community Table
                     zxr10RMAPMatchCommunityEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.3.1 no-access
Match BGP community list
                         zxr10RMAPCommunityName 1.3.6.1.4.1.3902.3.6000.604.2.1.3.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                         zxr10RMAPCommunitySequence 1.3.6.1.4.1.3902.3.6000.604.2.1.3.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                         zxr10RMAPCommunityNo 1.3.6.1.4.1.3902.3.6000.604.2.1.3.1.3 integer32 no-access
Community list number. The range of config is 0 to 499. Each sequence has 10 match community items at most.
                         zxr10RMAPCommunityMatchName 1.3.6.1.4.1.3902.3.6000.604.2.1.3.1.4 displaystring no-access
Name of Community (0-31 characters)
                         zxr10RMAPCommunityRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.3.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchExtCommunityTable 1.3.6.1.4.1.3902.3.6000.604.2.1.4 no-access
Route-map Match ExtCommunity Table
                     zxr10RMAPMatchExtCommunityEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.4.1 no-access
Match BGP extcommunity list
                         zxr10RMAPExtCommunityName 1.3.6.1.4.1.3902.3.6000.604.2.1.4.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                         zxr10RMAPExtCommunitySequence 1.3.6.1.4.1.3902.3.6000.604.2.1.4.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                         zxr10RMAPExtCommunityNo 1.3.6.1.4.1.3902.3.6000.604.2.1.4.1.3 integer32 no-access
ExtCommunity list number. The range of config is 0 to 500. Each sequence has 10 match extcommunity items at most.
                         zxr10RMAPExtCommunityMatchName 1.3.6.1.4.1.3902.3.6000.604.2.1.4.1.4 displaystring no-access
Name of ExtCommunity (0-31 characters)
                         zxr10RMAPExtCommunityRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.4.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchInterfaceTable 1.3.6.1.4.1.3902.3.6000.604.2.1.5 no-access
Route-map Match Interface Table
                     zxr10RMAPMatchInterfaceEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.5.1 no-access
Match first hop interface of route
                         zxr10RMAPInterfaceName 1.3.6.1.4.1.3902.3.6000.604.2.1.5.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                         zxr10RMAPInterfaceSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.5.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                         zxr10RMAPInterface 1.3.6.1.4.1.3902.3.6000.604.2.1.5.1.3 displaystring no-access
Interface Name(1-31 characters). Each sequence has 10 match interface items at most. This match item supports these types of interface: [PORT-CLASS-FEI, PORT-CLASS-GEI-END] [PORT-CLASS-OC, PORT-TYPE-OC48] [PORT-TYPE-OC192, PORT-CLASS-E1-END] [PORT-CLASS-E1-C-CH, PORT-TYPE-ULEI] [PORT-CLASS-GVI, PORT-CLASS-GVI-END] [PORT-CLASS-QX, PORT-CLASS-QX-END] [PORT-TYPE-MANAGE, PORT-TYPE-MANAGE] [PORT-CLASS-DSL, PORT-CLASS-DSL-END] [PORT-CLASS-SPECIAL, PORT-TYPE-SUPERQINQ] [PORT-TYPE-TE-TUNNEL, PORT-TYPE-IPSEC-TUNNEL] [PORT-TYPE-CIP, PORT-TYPE-QX-LOGIC].
                         zxr10RMAPInterfaceRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.5.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchIpAddressAclTable 1.3.6.1.4.1.3902.3.6000.604.2.1.6 no-access
Route-map Match IpAddress Table(match ip address by acl).
                     zxr10RMAPMatchIpAddressAclEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.6.1 no-access
Match address of route or match packet. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. Otherwise, It conflicts with the item that match ip address by pfl. If zxr10RMAPIsConfigAcl is true,it expresses that this config is match ip address by acl.
                         zxr10RMAPMatchAclName 1.3.6.1.4.1.3902.3.6000.604.2.1.6.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                         zxr10RMAPMatchAclSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.6.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                         zxr10RMAPAclName 1.3.6.1.4.1.3902.3.6000.604.2.1.6.1.3 displaystring no-access
Name of an access-list(1-31 characters). Each sequence has 10 match ip address items at most.
                         zxr10RMAPIsConfigAcl 1.3.6.1.4.1.3902.3.6000.604.2.1.6.1.4 truthvalue no-access
It expresses that this config is match ip address by acl.
                         zxr10RMAPMatchAclRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.6.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchIpAddressPflTable 1.3.6.1.4.1.3902.3.6000.604.2.1.7 no-access
Route-map Match IpAddress Table(match ip address by pfl)
                     zxr10RMAPMatchIpAddressPflEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.7.1 no-access
Match address of route or match packet. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. Otherwise, It conflicts with the item that match ip address by acl.
                         zxr10RMAPMatchPflName 1.3.6.1.4.1.3902.3.6000.604.2.1.7.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                         zxr10RMAPMatchPflSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.7.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                         zxr10RMAPPflName 1.3.6.1.4.1.3902.3.6000.604.2.1.7.1.3 displaystring no-access
Name of a prefix list (1-31 characters). Each sequence has 10 match ip address items at most.
                         zxr10RMAPIsConfigPfl 1.3.6.1.4.1.3902.3.6000.604.2.1.7.1.4 truthvalue no-access
It expresses that this config is match ip address by pfl.
                         zxr10RMAPMatchPflRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.7.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchIpMetricTable 1.3.6.1.4.1.3902.3.6000.604.2.1.8 no-access
Route-map Match IpMetric Table
                     zxr10RMAPMatchIpMetricEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.8.1 no-access
Match metric of route. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type.
                         zxr10RMAPIpMetricName 1.3.6.1.4.1.3902.3.6000.604.2.1.8.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                         zxr10RMAPIpMetricSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.8.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                         zxr10RMAPIpMetric 1.3.6.1.4.1.3902.3.6000.604.2.1.8.1.3 unsigned32 no-access
Metric Value. The range of config is 0 to 4294967295. Each sequence has 10 match ip metric items at most.
                         zxr10RMAPIpMetricRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.8.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchIpNextHopTable 1.3.6.1.4.1.3902.3.6000.604.2.1.9 no-access
Route-map Match IpNextHop Table
                     zxr10RMAPMatchIpNextHopEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.9.1 no-access
Match next-hop address of route. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type.
                         zxr10RMAPIpNextHopName 1.3.6.1.4.1.3902.3.6000.604.2.1.9.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                         zxr10RMAPIpNextHopSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.9.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                         zxr10RMAPIpNextHop 1.3.6.1.4.1.3902.3.6000.604.2.1.9.1.3 displaystring no-access
Name of an access-list(1-31 characters). Each sequence has 10 match ip next-hop items at most.
                         zxr10RMAPIpNextHopRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.9.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchIpTagTable 1.3.6.1.4.1.3902.3.6000.604.2.1.10 no-access
Route-map Match IpTag Table
                       zxr10RMAPMatchIpTagEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.10.1 no-access
Match tag of route. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type.
                           zxr10RMAPIpTagName 1.3.6.1.4.1.3902.3.6000.604.2.1.10.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPIpTagSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.10.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPIpTag 1.3.6.1.4.1.3902.3.6000.604.2.1.10.1.3 unsigned32 no-access
Tag Value. The range of config is 0 to 4294967295. Each sequence has 10 match ip tag items at most.
                           zxr10RMAPIpTagRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.10.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchIpv6AddressTable 1.3.6.1.4.1.3902.3.6000.604.2.1.11 no-access
Route-map Match Ipv6Address Table
                       zxr10RMAPMatchIpv6AddressEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.11.1 no-access
Match address of route or match packet. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
                           zxr10RMAPIpv6AddressName 1.3.6.1.4.1.3902.3.6000.604.2.1.11.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPIpv6AddressSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.11.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPIpv6Address 1.3.6.1.4.1.3902.3.6000.604.2.1.11.1.3 displaystring no-access
Name of an access-list(1-31 characters). Each sequence has 10 match ipv6 address items at most.
                           zxr10RMAPIpv6AddressRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.11.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchIpv6MetricTable 1.3.6.1.4.1.3902.3.6000.604.2.1.12 no-access
Route-map Match Ipv6Metric Table
                       zxr10RMAPMatchIpv6MetricEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.12.1 no-access
Match metric of route. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
                           zxr10RMAPIpv6MetricName 1.3.6.1.4.1.3902.3.6000.604.2.1.12.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPIpv6MetricSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.12.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPIpv6Metric 1.3.6.1.4.1.3902.3.6000.604.2.1.12.1.3 unsigned32 no-access
Metric Value. The range of config is 0 to 4294967295. Each sequence has 10 match ipv6 metric items at most.
                           zxr10RMAPIpv6MetricRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.12.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchIpv6NextHopTable 1.3.6.1.4.1.3902.3.6000.604.2.1.13 no-access
Route-map Match Ipv6NextHop Table
                       zxr10RMAPMatchIpv6NextHopEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.13.1 no-access
Match next-hop address of route. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
                           zxr10RMAPIpv6NextHopName 1.3.6.1.4.1.3902.3.6000.604.2.1.13.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPIpv6NextHopSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.13.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPIpv6NextHop 1.3.6.1.4.1.3902.3.6000.604.2.1.13.1.3 displaystring no-access
Name of an access-list(1-31 characters). Each sequence has 10 match ipv6 next-hop items at most.
                           zxr10RMAPIpv6NextHopRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.13.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchIpv6TagTable 1.3.6.1.4.1.3902.3.6000.604.2.1.14 no-access
Route-map Match Ipv6Tag Table
                       zxr10RMAPMatchIpv6TagEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.14.1 no-access
Match tag of route. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
                           zxr10RMAPIpv6TagName 1.3.6.1.4.1.3902.3.6000.604.2.1.14.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPIpv6TagSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.14.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPIpv6Tag 1.3.6.1.4.1.3902.3.6000.604.2.1.14.1.3 unsigned32 no-access
Tag Value. The range of config is 0 to 4294967295. Each sequence has 10 match ipv6 tag items at most.
                           zxr10RMAPIpv6TagRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.14.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchRdTable 1.3.6.1.4.1.3902.3.6000.604.2.1.15 no-access
Route-map Match Rd Table
                       zxr10RMAPMatchRdEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.15.1 no-access
Match BGP/VPN rd list
                           zxr10RMAPMatchRdName 1.3.6.1.4.1.3902.3.6000.604.2.1.15.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPMatchRdSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.15.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPMatchRd 1.3.6.1.4.1.3902.3.6000.604.2.1.15.1.3 integer32 no-access
Rd-list number. The range of config is 1 to 500. 0 is invalid value. Each sequence has 10 match rd-list items at most.
                           zxr10RMAPMatchRdRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.15.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchRouteTypeTable 1.3.6.1.4.1.3902.3.6000.604.2.1.16 no-access
Route-map Match RouteType Table
                       zxr10RMAPMatchRouteTypeEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.16.1 no-access
Match route-type of route
                           zxr10RMAPMatchRouteTypeName 1.3.6.1.4.1.3902.3.6000.604.2.1.16.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPMatchRouteTypeSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.16.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPMatchRouteType 1.3.6.1.4.1.3902.3.6000.604.2.1.16.1.3 rmapmatchroutetype no-access
local Locally generated route.Value is 1. internal Internal route (including OSPF intra/inter area).Value is 2. level-1 IS-IS level-1 route.Value is 3. level-2 IS-IS level-2 route.Value is 4. external External route (OSPF type 1/2).Value is 5. ebgp External border gateway protocol(EBGP) route.Value is 8. ibgp Internal border gateway protocol(IBGP) route.Value is 9. static Static route.Value is 10. bgp-agg BGP aggregate route.Value is 11.
                           zxr10RMAPMatchExternType 1.3.6.1.4.1.3902.3.6000.604.2.1.16.1.4 rmapmatchroutetype no-access
type-1 OSPF external type 1 route.Value is 6. type-2 OSPF external type 2 route.Value is 7.
                           zxr10RMAPMatchRouteTypeRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.16.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetAspathTable 1.3.6.1.4.1.3902.3.6000.604.2.1.17 no-access
Route-map Set Aspath Table
                       zxr10RMAPSetAspathEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1 no-access
Set prepend string for a BGP as-path attribute. 0 is invalid value.
                           zxr10RMAPSetAspathName 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetAspathSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetAspathAsnd1 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.3 unsigned32 read-only
AS number. The range of config is 1 to 4294967295.
                           zxr10RMAPSetAspathAsnd2 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.4 unsigned32 read-only
AS number. The range of config is 1 to 4294967295.
                           zxr10RMAPSetAspathAsnd3 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.5 unsigned32 read-only
AS number. The range of config is 1 to 4294967295.
                           zxr10RMAPSetAspathAsnd4 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.6 unsigned32 read-only
AS number. The range of config is 1 to 4294967295.
                           zxr10RMAPSetAspathAsnd5 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.7 unsigned32 read-only
AS number. The range of config is 1 to 4294967295.
                           zxr10RMAPSetAspathAsnd6 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.8 unsigned32 read-only
AS number. The range of config is 1 to 4294967295.
                           zxr10RMAPSetAspathAsnd7 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.9 unsigned32 read-only
AS number. The range of config is 1 to 4294967295.
                           zxr10RMAPSetAspathAsnd8 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.10 unsigned32 read-only
AS number. The range of config is 1 to 4294967295.
                           zxr10RMAPSetAspathAsnd9 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.11 unsigned32 read-only
AS number. The range of config is 1 to 4294967295.
                           zxr10RMAPSetAspathAsnd10 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.12 unsigned32 read-only
AS number. The range of config is 1 to 4294967295.
                           zxr10RMAPSetAspathPrepOrRep 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.13 rmapprependreplace read-only
Set aspath prepend or replace,prepend is 1,replace is 2
                           zxr10RMAPSetAspathRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetCommunityConstTable 1.3.6.1.4.1.3902.3.6000.604.2.1.18 no-access
Route-map Set Community Table
                       zxr10RMAPSetCommunityConstEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.18.1 no-access
Set BGP community attribute. The value of config includes: internet Internet(Well known community) no-advertise Do not advertise to any peer no-export Do not export to next AS no-export-subconfed Do not send outside local AS none No community attribute. If set community none has been setted, other types of set community can't be setted. If set community has been setted with attribute addtive, other configs of set community can't be setted without attribute addtive.
                           zxr10RMAPSetCommName 1.3.6.1.4.1.3902.3.6000.604.2.1.18.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetCommSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.18.1.2 integer32 no-access
Sequence of Route-map. The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetCommIsAddtive 1.3.6.1.4.1.3902.3.6000.604.2.1.18.1.3 rmapsetcomm no-access
additive Add to the existing community. Value is 5. none No community attribute. Value is 6.
                           zxr10RMAPSetCommConstVal 1.3.6.1.4.1.3902.3.6000.604.2.1.18.1.4 rmapsetcomm no-access
internet Internet(Well known community). Value is 4. no-advertise Do not advertise to any peer. Value is 2. no-export Do not export to next AS. Value is 1. no-export-subconfed Do not send outside local AS. Value is 3.
                           zxr10RMAPSetCommConstRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.18.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetCommunityAsnnTable 1.3.6.1.4.1.3902.3.6000.604.2.1.19 no-access
Route-map Set Community Table
                       zxr10RMAPSetCommunityAsnnEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.19.1 no-access
Set BGP community attribute in aa:nn format. If set community has been setted with attribute addtive, other configs of set community can't be setted without attribute addtive. If zxr10RMAPSetCommAsnn is setted with value 0:0 , the config will transform to config of set community internet. If zxr10RMAPSetCommAsnn is setted with value 0:X , the config will transform to config of set community X in uint format. If zxr10RMAPSetCommUint is setted with value 65535:65281, the config will transform to config of set community no-export. If zxr10RMAPSetCommUint is setted with value 65535:65282, the config will transform to config of set community no-advertise. If zxr10RMAPSetCommUint is setted with value 65535:65283, the config will transform to config of set community no-export-subconfed.
                           zxr10RMAPSetCommAsnnName 1.3.6.1.4.1.3902.3.6000.604.2.1.19.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetCommAsnnSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.19.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetCommAsnnIsAddtive 1.3.6.1.4.1.3902.3.6000.604.2.1.19.1.3 rmapsetcomm no-access
additive Add to the existing community. Value is 5.
                           zxr10RMAPSetCommAsnn 1.3.6.1.4.1.3902.3.6000.604.2.1.19.1.4 displaystring no-access
Community number in aa:nn format. The range of aa is 0 to 65535. The range of nn is 0 to 65535. The ASCII code of : is 58. The ASCII code from 1 to 9 is 49 to 57.
                           zxr10RMAPSetCommAsnnRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.19.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetCommunityUintTable 1.3.6.1.4.1.3902.3.6000.604.2.1.20 no-access
Route-map Set Community Table
                       zxr10RMAPSetCommunityUintEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.20.1 no-access
Set BGP community attribute in Unsigned32 format. If set community has been setted with addtive attribute, other configs of set community can't be setted without addtive attribute. If zxr10RMAPSetCommUint is setted with value which is larger than 65535, the config will transform to config of set community X:Y in ASNN format. For example,set community 65536 will transform to set community 1:1. If zxr10RMAPSetCommUint is setted with value 4294967041, the config will transform to config of set community no-export. If zxr10RMAPSetCommUint is setted with value 4294967042, the config will transform to config of set community no-advertise. If zxr10RMAPSetCommUint is setted with value 4294967043, the config will transform to config of set community no-export-subconfed.
                           zxr10RMAPSetCommUintName 1.3.6.1.4.1.3902.3.6000.604.2.1.20.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetCommUintSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.20.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetCommUintIsAddtive 1.3.6.1.4.1.3902.3.6000.604.2.1.20.1.3 rmapsetcomm no-access
additive Add to the existing community. Value is 5.
                           zxr10RMAPSetCommUint 1.3.6.1.4.1.3902.3.6000.604.2.1.20.1.4 unsigned32 no-access
Community number in unsigned32 format. The range of config is 1 to 4294967295.
                           zxr10RMAPSetCommUintRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.20.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetDampeningTable 1.3.6.1.4.1.3902.3.6000.604.2.1.21 no-access
Route-map Set Dampening Table
                       zxr10RMAPSetDampeningEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.21.1 no-access
Set BGP route flap dampening parameters
                           zxr10RMAPSetDampeningName 1.3.6.1.4.1.3902.3.6000.604.2.1.21.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetDampeningSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.21.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetDampeningHalfLife 1.3.6.1.4.1.3902.3.6000.604.2.1.21.1.3 integer32 read-only
Half-life time for the penalty. The range of config is 1 to 45. The value for half-life should be smaller than max duration to suppress.
                           zxr10RMAPSetDampeningReuse 1.3.6.1.4.1.3902.3.6000.604.2.1.21.1.4 integer32 read-only
Penalty to start reusing a route. The range of config is 1 to 20000. The value for reusing should be smaller than the value for suppressing.
                           zxr10RMAPSetDampeningSuppress 1.3.6.1.4.1.3902.3.6000.604.2.1.21.1.5 integer32 read-only
Penalty to start suppressing a route. The range of config is 1 to 20000. The value for suppressing should be larger than the value for reusing.
                           zxr10RMAPSetDampeningMaxSupTime 1.3.6.1.4.1.3902.3.6000.604.2.1.21.1.6 integer32 read-only
Maximum duration to suppress a stable route. The range of config is 1 to 255. The value for max duration to suppress should be larger than half-life.
                           zxr10RMAPSetDampeningRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.21.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetDscpTable 1.3.6.1.4.1.3902.3.6000.604.2.1.22 no-access
Route-map Set Dscp Table
                       zxr10RMAPSetDscpEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.22.1 no-access
Set DSCP for PBR. This set item conflicts with these items below: set ip precedence set ip tos set ipv6 precedence set ipv6 traffic-class
                           zxr10RMAPSetDscpName 1.3.6.1.4.1.3902.3.6000.604.2.1.22.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetDscpSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.22.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetDscp 1.3.6.1.4.1.3902.3.6000.604.2.1.22.1.3 integer32 read-only
Type of service value. The range of config is 0 to 63. 255 is invalid value.
                           zxr10RMAPSetDscpRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.22.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetRtTable 1.3.6.1.4.1.3902.3.6000.604.2.1.23 no-access
Route-map Set Rt Table
                       zxr10RMAPSetRtEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.23.1 no-access
Set Transitive Route Target extended community. If set extcommunity rt-trans remove has been setted, other types of set extcommunity can't be setted. If set extcommunity rt-trans has been setted with addtive attribute, other configs of set extcommunity rt-trans can't be setted without addtive attribute.
                           zxr10RMAPSetRtName 1.3.6.1.4.1.3902.3.6000.604.2.1.23.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetRtSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.23.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetRtAsnn 1.3.6.1.4.1.3902.3.6000.604.2.1.23.1.3 displaystring no-access
VPN extended community. This config includes 3 formats. 1.ASNN(X:Y) The range of X is 0 to 65535. The range of X is 0 to 4294967295. 2.ASNDot(X.Y:Z) The range of X is 1 to 65535. The range of Y is 0 to 65535. The range of Z is 0 to 65535. 3.ASNIp(A.B.C.D:X) The range of X is 0 to 65535. The ASCII code of . is 46. The ASCII code of : is 58. The ASCII code from 1 to 9 is 49 to 57.
                           zxr10RMAPSetRtReOrAdd 1.3.6.1.4.1.3902.3.6000.604.2.1.23.1.4 rmapsetrt no-access
additive Add to the existing extcommunity.Value is 6. remove Remove the existing extcommunity.Value is 7.
                           zxr10RMAPSetRtRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.23.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetSooTable 1.3.6.1.4.1.3902.3.6000.604.2.1.24 no-access
Route-map Set Soo Table
                       zxr10RMAPSetSooEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.24.1 no-access
Transitive Site-of-Origin extended community. If set extcommunity soo-trans remove has been setted, other types of set extcommunity can't be setted. The ASCII code of . is 46. The ASCII code of : is 58. The ASCII code from 1 to 9 is 49 to 57.
                           zxr10RMAPSetSooName 1.3.6.1.4.1.3902.3.6000.604.2.1.24.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetSooSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.24.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetSooAsnn 1.3.6.1.4.1.3902.3.6000.604.2.1.24.1.3 displaystring read-only
VPN extended community. This config includes 3 formats. 1.ASNN(X:Y) The range of X is 0 to 65535. The range of X is 0 to 4294967295. 2.ASNDot(X.Y:Z) The range of X is 1 to 65535. The range of Y is 0 to 65535. The range of Z is 0 to 65535. 3.ASNIp(A.B.C.D:X) The range of X is 0 to 65535.
                           zxr10RMAPSetSooRemove 1.3.6.1.4.1.3902.3.6000.604.2.1.24.1.4 rmapsetrt read-only
Remove the existing extcommunity.Value is 7
                           zxr10RMAPSetSooRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.24.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetGlobalTable 1.3.6.1.4.1.3902.3.6000.604.2.1.25 no-access
Route-map Set Global Table
                       zxr10RMAPSetGlobalEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.25.1 no-access
Set global route for PBR. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set interface set ip next-hop set ipv6 next-hop set next-hop set ip path set ipv6 path set vrf
                           zxr10RMAPSetGlobalName 1.3.6.1.4.1.3902.3.6000.604.2.1.25.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetGlobalSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.25.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetGlobal 1.3.6.1.4.1.3902.3.6000.604.2.1.25.1.3 truthvalue read-only
It expresses that whether this config is setted or not.
                           zxr10RMAPSetGlobalIPAddr 1.3.6.1.4.1.3902.3.6000.604.2.1.25.1.4 ipaddress read-only
IP address of next hop. This attribut may be setted or not. 0 is invaid value.
                           zxr10RMAPSetGlobalIpConst 1.3.6.1.4.1.3902.3.6000.604.2.1.25.1.5 rmapsetglobalipconst read-only
If zxr10RMAPSetGlobalIPAddr is setted, this attribut should be setted with value 3
                           zxr10RMAPSetGlobalNextHopConst 1.3.6.1.4.1.3902.3.6000.604.2.1.25.1.6 rmapsetglobalnexthopconst read-only
If zxr10RMAPSetGlobalIPAddr is setted, this attribut should be setted with value 1
                           zxr10RMAPSetGlobalRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.25.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetInterfaceTable 1.3.6.1.4.1.3902.3.6000.604.2.1.26 no-access
Route-map Set Interface Table
                       zxr10RMAPSetInterfaceEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.26.1 no-access
Set output interface. Each sequence has 10 set interface items at most. This set item supports these types of interface: [PORT-CLASS-OC, PORT-TYPE-OC48] [PORT-TYPE-OC192, PORT-CLASS-OC-END] PORT-TYPE-NULL PORT-TYPE-TE-TUNNEL PORT-TYPE-GRE-TUNNEL PORT-TYPE-OC3-C-E1 PORT-TYPE-OC3-C-E1-TS PORT-TYPE-E1-C-TS [PORT-TYPE-DIALER,PORT-TYPE-DIALER]. It conflicts with these set items below: set vrf set global
                           zxr10RMAPSetInterfaceName 1.3.6.1.4.1.3902.3.6000.604.2.1.26.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetInterfaceSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.26.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetInterface 1.3.6.1.4.1.3902.3.6000.604.2.1.26.1.3 displaystring no-access
Interface Name. Each sequence has 10 set interface items at most.
                           zxr10RMAPSetInterfaceRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.26.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetIpMetricTable 1.3.6.1.4.1.3902.3.6000.604.2.1.27 no-access
Route-map Set IpMetric Table
                       zxr10RMAPSetIpMetricEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.27.1 no-access
Set metric value for destination routing protocol. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type.
                           zxr10RMAPSetIpMetricName 1.3.6.1.4.1.3902.3.6000.604.2.1.27.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetIpMetricSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.27.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetIpMetricAct 1.3.6.1.4.1.3902.3.6000.604.2.1.27.1.3 rmapsetmetricact read-only
plus :Add metric.Value is 1. minus:Del metric.Value is 2. unset:No Action.Value is 0.
                           zxr10RMAPSetIpMetricValue 1.3.6.1.4.1.3902.3.6000.604.2.1.27.1.4 unsigned32 read-only
Metric value. The range of config is 0 to 4294967295
                           zxr10RMAPSetIpMetricRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.27.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetIpMetricTypeTable 1.3.6.1.4.1.3902.3.6000.604.2.1.28 no-access
Route-map Set IpMetricType Table
                       zxr10RMAPSetIpMetricTypeEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.28.1 no-access
Set type of metric for destination routing protocol. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type.
                           zxr10RMAPSetIpMetricTypeName 1.3.6.1.4.1.3902.3.6000.604.2.1.28.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetIpMetricTypeSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.28.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetIpMetricType 1.3.6.1.4.1.3902.3.6000.604.2.1.28.1.3 rmapsetmetrictype read-only
external IS-IS external metric.Value is 2. internal IS-IS internal metric.Value is 1. type-1 OSPF external type 1 metric.Value is 3. type-2 OSPF external type 2 metric.Value is 4. 0 is invalid value.
                           zxr10RMAPSetIpMetricTypeRowStat 1.3.6.1.4.1.3902.3.6000.604.2.1.28.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetIpNextHopTable 1.3.6.1.4.1.3902.3.6000.604.2.1.29 no-access
Route-map Set IpNextHop Table
                       zxr10RMAPSetIpNextHopEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.29.1 no-access
Set Next hop address. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set vrf set global
                           zxr10RMAPSetIpNextHopName 1.3.6.1.4.1.3902.3.6000.604.2.1.29.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetIpNextHopSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.29.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetIpNextHop 1.3.6.1.4.1.3902.3.6000.604.2.1.29.1.3 ipaddress no-access
IP address of next hop. 0 is invalid value. Each sequence has 10 set ip next-hop items at most.
                           zxr10RMAPSetIpNextHopSqa 1.3.6.1.4.1.3902.3.6000.604.2.1.29.1.4 displaystring read-only
Track name. This attribut may be setted or not.
                           zxr10RMAPSetIpNextHopRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.29.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetIpPathTable 1.3.6.1.4.1.3902.3.6000.604.2.1.30 no-access
Route-map Set IpPath Table
                       zxr10RMAPSetIpPathEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.30.1 no-access
Set output interface. This set item supports these types of interface: [PORT-CLASS-FEI,PORT-CLASS-GEI-END]. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set vrf set global
                           zxr10RMAPIpPathName 1.3.6.1.4.1.3902.3.6000.604.2.1.30.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPIpPathSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.30.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetIpPathIntf 1.3.6.1.4.1.3902.3.6000.604.2.1.30.1.3 displaystring read-only
Name of Interface (1-31 characters)
                           zxr10RMAPSetIpPathNextHop 1.3.6.1.4.1.3902.3.6000.604.2.1.30.1.4 ipaddress read-only
IP address of next hop.0 is invalid value.
                           zxr10RMAPSetIpPathRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.30.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetIpPrecTable 1.3.6.1.4.1.3902.3.6000.604.2.1.31 no-access
Route-map Set IpPrec Table
                       zxr10RMAPSetIpPrecEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.31.1 no-access
Set precedence field. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set dscp. If zxr10RMAPSetIpPrec is getted with value 255, it expresses this config is invalid.
                           zxr10RMAPSetIpPrecName 1.3.6.1.4.1.3902.3.6000.604.2.1.31.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetIpPrecSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.31.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetIpPrec 1.3.6.1.4.1.3902.3.6000.604.2.1.31.1.3 integer32 read-only
Precedence value. The range of config is 0 to 7. 255 is invalid value. If zxr10RMAPSetIpPrec is setted with valid value, zxr10RMAPSetIpPrecMap should be setted with 255.
                           zxr10RMAPSetIpPrecMap 1.3.6.1.4.1.3902.3.6000.604.2.1.31.1.4 rmapsetprec read-only
critical Set critical precedence (6) flash Set flash precedence (4) flash-override Set flash override precedence (5) immediate Set immediate precedence (3) internet Set internetwork control precedence (7) network Set network control precedence (8) priority Set priority precedence (2) routine Set routine precedence (1) 255 is invalid value. If zxr10RMAPSetIpPrecMap is setted with valid value, zxr10RMAPSetIpPrec should be setted with 255.
                           zxr10RMAPSetIpPrecRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.31.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetIpTagTable 1.3.6.1.4.1.3902.3.6000.604.2.1.32 no-access
Route-map Set IpTag Table
                       zxr10RMAPSetIpTagEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.32.1 no-access
Set tag value for destination routing protocol. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type.
                           zxr10RMAPSetIpTagName 1.3.6.1.4.1.3902.3.6000.604.2.1.32.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetIpTagSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.32.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetIpTag 1.3.6.1.4.1.3902.3.6000.604.2.1.32.1.3 unsigned32 read-only
Set tag value for destination routing protocol. The range of config is 0 to 4294967295.
                           zxr10RMAPSetIpTagRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.32.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetIpTosTable 1.3.6.1.4.1.3902.3.6000.604.2.1.33 no-access
Route-map Set IpTos Table
                       zxr10RMAPSetIpTosEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.33.1 no-access
Set type of service field. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set dscp
                           zxr10RMAPSetIpTosName 1.3.6.1.4.1.3902.3.6000.604.2.1.33.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetIpTosSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.33.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetIpTos 1.3.6.1.4.1.3902.3.6000.604.2.1.33.1.3 integer32 read-only
Type of service value. The range of config is 0 to 15. 255 is invalid value. If zxr10RMAPSetIpTos is setted with valid value, zxr10RMAPSetIpTosMap should be setted with 255.
                           zxr10RMAPSetIpTosMap 1.3.6.1.4.1.3902.3.6000.604.2.1.33.1.4 rmapsettos read-only
max-reliability Set max reliable TOS (3) max-throughput Set max throughput TOS (4) min-delay Set min delay TOS (5) min-monetary-cost Set min monetary cost TOS (2) normal Set normal TOS (1) 255 is invalid value. If zxr10RMAPSetIpTosMap is setted with valid value, zxr10RMAPSetIpTos should be setted with 255.
                           zxr10RMAPSetIpTosRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.33.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetIpv6MetricTable 1.3.6.1.4.1.3902.3.6000.604.2.1.34 no-access
Route-map Set Ipv6Metric Table
                       zxr10RMAPSetIpv6MetricEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.34.1 no-access
Set metric value for destination routing protocol. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
                           zxr10RMAPSetIpv6MetricName 1.3.6.1.4.1.3902.3.6000.604.2.1.34.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetIpv6MetricSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.34.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetIpv6MetricAct 1.3.6.1.4.1.3902.3.6000.604.2.1.34.1.3 rmapsetmetricact read-only
plus :Add metric.Value is 1. minus:Del metric.Value is 2. unset:No Action.Value is 0.
                           zxr10RMAPSetIpv6MetricValue 1.3.6.1.4.1.3902.3.6000.604.2.1.34.1.4 unsigned32 read-only
Metric value. The range of config is 0 to 4294967295.
                           zxr10RMAPSetIpv6MetricRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.34.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetIpv6MetricTypeTable 1.3.6.1.4.1.3902.3.6000.604.2.1.35 no-access
Route-map Set Ipv6MetricType Table
                       zxr10RMAPSetIpv6MetricTypeEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.35.1 no-access
Set type of metric for destination routing protocol. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
                           zxr10RMAPSetIpv6MetricTypeName 1.3.6.1.4.1.3902.3.6000.604.2.1.35.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetIpv6MetricTypeSeq 1.3.6.1.4.1.3902.3.6000.604.2.1.35.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetIpv6MetricType 1.3.6.1.4.1.3902.3.6000.604.2.1.35.1.3 rmapsetmetrictype read-only
external IS-IS external metric.Value is 2. internal IS-IS internal metric.Value is 1. type-1 OSPF external type 1 metric.Value is 3. type-2 OSPF external type 2 metric.Value is 4. 0 is invalid value
                           zxr10RMAPSetIpv6MetricTypeRowSta 1.3.6.1.4.1.3902.3.6000.604.2.1.35.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetIpv6NextHopTable 1.3.6.1.4.1.3902.3.6000.604.2.1.36 no-access
Route-map Set IpNextHop Table
                       zxr10RMAPSetIpv6NextHopEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.36.1 no-access
Set Next hop address. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type. It conflicts with these set items below: set vrf set global
                           zxr10RMAPSetIpv6NextHopName 1.3.6.1.4.1.3902.3.6000.604.2.1.36.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetIpv6NextHopSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.36.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetIpv6NextHop 1.3.6.1.4.1.3902.3.6000.604.2.1.36.1.3 ipv6address no-access
IPv6 address of next hop. 0 is invalid value. Each sequence has 10 set ipv6 next-hop items at most.
                           zxr10RMAPSetIpv6NextHopRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.36.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetIpv6PathTable 1.3.6.1.4.1.3902.3.6000.604.2.1.37 no-access
Route-map Set Ipv6Path Table
                       zxr10RMAPSetIpv6PathEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.37.1 no-access
Set output interface. This set item supports these types of interface: [PORT-CLASS-FEI,PORT-CLASS-GEI-END]. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type. It conflicts with these set items below: set vrf set global
                           zxr10RMAPSetIpv6PathName 1.3.6.1.4.1.3902.3.6000.604.2.1.37.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetIpv6PathSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.37.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetIpv6PathIntf 1.3.6.1.4.1.3902.3.6000.604.2.1.37.1.3 displaystring read-only
Name of Interface (1-31 characters)
                           zxr10RMAPSetIpv6PathNextHop 1.3.6.1.4.1.3902.3.6000.604.2.1.37.1.4 ipv6address read-only
IPv6 address of next hop.0 is invalid value.
                           zxr10RMAPSetIpv6PathRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.37.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetIpv6PrecTable 1.3.6.1.4.1.3902.3.6000.604.2.1.38 no-access
Route-map Set Ipv6Prec Table
                       zxr10RMAPSetIpv6PrecEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.38.1 no-access
Set precedence field. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type. It conflicts with these set items below: set dscp 255 is invalid value.
                           zxr10RMAPSetIpv6precName 1.3.6.1.4.1.3902.3.6000.604.2.1.38.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetIpv6precSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.38.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetIpv6prec 1.3.6.1.4.1.3902.3.6000.604.2.1.38.1.3 integer32 read-only
Precedence value. 255 is invalid. The range of config is 0 to 7. If zxr10RMAPSetIpv6prec is setted with valid value, zxr10RMAPSetIpv6precMap should be setted with 255.
                           zxr10RMAPSetIpv6precMap 1.3.6.1.4.1.3902.3.6000.604.2.1.38.1.4 rmapsetprec read-only
critical Set critical precedence (6) flash Set flash precedence (4) flash-override Set flash override precedence (5) immediate Set immediate precedence (3) internet Set internetwork control precedence (7) network Set network control precedence (8) priority Set priority precedence (2) routine Set routine precedence (1) 255 is invalid value. If zxr10RMAPSetIpv6precMap is setted with valid value, zxr10RMAPSetIpv6prec should be setted with 255.
                           zxr10RMAPSetIpv6precRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.38.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetIpv6TagTable 1.3.6.1.4.1.3902.3.6000.604.2.1.39 no-access
Route-map Set Ipv6Tag Table
                       zxr10RMAPSetIpv6TagEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.39.1 no-access
Set tag value for destination routing protocol. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
                           zxr10RMAPSetIpv6TagName 1.3.6.1.4.1.3902.3.6000.604.2.1.39.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetIpv6TagSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.39.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetIpv6Tag 1.3.6.1.4.1.3902.3.6000.604.2.1.39.1.3 unsigned32 read-only
Precedence value. The range of config is 0 to 4294967295.
                           zxr10RMAPSetIpv6TagRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.39.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetIpv6TrafficTable 1.3.6.1.4.1.3902.3.6000.604.2.1.40 no-access
Route-map Set Ipv6Traffic Table
                       zxr10RMAPSetIpv6TrafficEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.40.1 no-access
Set IPv6 traffic-class. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type. It conflicts with these set items below: set dscp
                           zxr10RMAPSetIpv6TrafficName 1.3.6.1.4.1.3902.3.6000.604.2.1.40.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetIpv6TrafficSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.40.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetIpv6Traffic 1.3.6.1.4.1.3902.3.6000.604.2.1.40.1.3 integer32 read-only
Value of IPv6 traffic-class. The range of config is 0 to 255.
                           zxr10RMAPSetIpv6TrafficRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.40.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetLevelTable 1.3.6.1.4.1.3902.3.6000.604.2.1.41 no-access
Route-map Set Level Table
                       zxr10RMAPSetLevelEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.41.1 no-access
Set where to import route
                           zxr10RMAPSetLevelName 1.3.6.1.4.1.3902.3.6000.604.2.1.41.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetLevelSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.41.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetLevel 1.3.6.1.4.1.3902.3.6000.604.2.1.41.1.3 rmapsetlevel read-only
level-1 Import into a level-1 area.Value is 1. level-1-2 Import into level-1 and level-2.Value is 3. level-2 Import into level-2 sub-domain.Value is 2. 0 is invalid value.
                           zxr10RMAPSetLevelRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.41.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetLocalPreTable 1.3.6.1.4.1.3902.3.6000.604.2.1.42 no-access
Route-map Set LocalPreference Table
                       zxr10RMAPSetLocalPreEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.42.1 no-access
Set BGP local preference path attribute.
                           zxr10RMAPSetLocalPreName 1.3.6.1.4.1.3902.3.6000.604.2.1.42.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetLocalPreSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.42.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetLocalPre 1.3.6.1.4.1.3902.3.6000.604.2.1.42.1.3 unsigned32 read-only
Preference value. The range of config is 0 to 4294967295.
                           zxr10RMAPSetLocalPreRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.42.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetMplsTable 1.3.6.1.4.1.3902.3.6000.604.2.1.43 no-access
Route-map Set Mpls-label Table
                       zxr10RMAPSetMplsEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.43.1 no-access
Set MPLS label for prefix
                           zxr10RMAPSetMplsName 1.3.6.1.4.1.3902.3.6000.604.2.1.43.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetMplsSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.43.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetMpls 1.3.6.1.4.1.3902.3.6000.604.2.1.43.1.3 truthvalue read-only
Set MPLS label for prefix. It expresses that whether this config is valid or not.
                           zxr10RMAPSetMplsRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.43.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetNextHopTable 1.3.6.1.4.1.3902.3.6000.604.2.1.44 no-access
Route-map Set NextHop Table
                       zxr10RMAPSetNextHopEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.44.1 no-access
Set IP address of next hop. It conflicts with these set items below: set vrf set global
                           zxr10RMAPSetNextHopName 1.3.6.1.4.1.3902.3.6000.604.2.1.44.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetNextHopSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.44.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetNextHop 1.3.6.1.4.1.3902.3.6000.604.2.1.44.1.3 ipaddress no-access
IP address of next hop. 0 is invalid value. Each sequence has 10 set next-hop items at most.
                           zxr10RMAPSetNextHopRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.44.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetOriginTable 1.3.6.1.4.1.3902.3.6000.604.2.1.45 no-access
Route-map Set Origin Table
                       zxr10RMAPSetOriginEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.45.1 no-access
Set BGP origin code
                           zxr10RMAPSetOriginName 1.3.6.1.4.1.3902.3.6000.604.2.1.45.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetOriginSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.45.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetOrigin 1.3.6.1.4.1.3902.3.6000.604.2.1.45.1.3 rmapsetorigin read-only
egp Remote EGP.Value is 2. igp Local IGP.Value is 1. incomplete Unknown heritage.Value is 3. 0 is invalid value.
                           zxr10RMAPSetOriginRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.45.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetQosIdTable 1.3.6.1.4.1.3902.3.6000.604.2.1.46 no-access
Route-map Set QosId Table
                       zxr10RMAPSetQosIdEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.46.1 no-access
Set QoS ID of routing
                           zxr10RMAPSetQosIdName 1.3.6.1.4.1.3902.3.6000.604.2.1.46.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetQosIdSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.46.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetQosId 1.3.6.1.4.1.3902.3.6000.604.2.1.46.1.3 integer32 read-only
QoS ID. The range of config is 1 to 16000. 0 is invalid value.
                           zxr10RMAPSetQosIdRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.46.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetVrfTable 1.3.6.1.4.1.3902.3.6000.604.2.1.47 no-access
Route-map Set Vrf Table
                       zxr10RMAPSetVrfEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.47.1 no-access
Set virtual route forwarding name. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set interface set ip next-hop set ipv6 next-hop set next-hop set global
                           zxr10RMAPSetVrfName 1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetVrfSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetVrf 1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.3 displaystring read-only
Virtual route forwarding name
                           zxr10RMAPSetVrfNextHop 1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.4 ipaddress read-only
IP address of next hop. 0 is invalid value. This attribut may be setted or not.
                           zxr10RMAPSetVrfSqa 1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.5 displaystring read-only
Track name. This attribut may be setted or not.
                           zxr10RMAPSetVrfIpConst 1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.6 rmapsetvrfipconst read-only
If zxr10RMAPSetVrfNextHop is setted, this attribute should be setted with value 1.
                           zxr10RMAPSetVrfNextHopConst 1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.7 rmapsetvrfnexthopconst read-only
If zxr10RMAPSetVrfNextHop is setted, this attribute should be setted with value 2.
                           zxr10RMAPSetVrfRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchAsLenTable 1.3.6.1.4.1.3902.3.6000.604.2.1.48 no-access
Route-map Match As-path-length Table
                       zxr10RMAPMatchAsLenEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.48.1 no-access
Match BGP as-path-length
                           zxr10RMAPMatchAsLenName 1.3.6.1.4.1.3902.3.6000.604.2.1.48.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPMatchAsLenSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.48.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPMatchAsLenAlg 1.3.6.1.4.1.3902.3.6000.604.2.1.48.1.3 rmapmatchalg read-only
eq Equal as-path length to be matched.Value is 1. ge Minimum as-path length to be matched.Value is 2. le Maximun as-path length to be matched.Value is 3.
                           zxr10RMAPMatchAsLen 1.3.6.1.4.1.3902.3.6000.604.2.1.48.1.4 integer32 read-only
As-path length. The range of config is 0 to 255.
                           zxr10RMAPMatchAsLenRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.48.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchAsUnqLenTable 1.3.6.1.4.1.3902.3.6000.604.2.1.49 no-access
Route-map Match As-path-unique-length Table
                       zxr10RMAPMatchAsUnqLenEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.49.1 no-access
Match BGP as-path-unique-length
                           zxr10RMAPMatchAsUnqLenName 1.3.6.1.4.1.3902.3.6000.604.2.1.49.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPMatchAsUnqLenSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.49.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPMatchAsUnqLenAlg 1.3.6.1.4.1.3902.3.6000.604.2.1.49.1.3 rmapmatchalg read-only
eq Equal as-path length to be matched.Value is 1. ge Minimum as-path length to be matched.Value is 2. le Maximun as-path length to be matched.Value is 3.
                           zxr10RMAPMatchAsUnqLen 1.3.6.1.4.1.3902.3.6000.604.2.1.49.1.4 integer32 read-only
As-path unique length. The range of config is 0 to 255.
                           zxr10RMAPMatchAsUnqLenRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.49.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchIpSourceAclTable 1.3.6.1.4.1.3902.3.6000.604.2.1.50 no-access
Route-map Match IpSource Table(match ip source by acl).
                       zxr10RMAPMatchIpSourceAclEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.50.1 no-access
Match source ip address of route or match packet. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. Otherwise, It conflicts with the item that match ip source by pfl. If zxr10RMAPsourceIsConfigAcl is true,it expresses that this config is match ip source by acl.
                           zxr10RMAPMatchSourceAclName 1.3.6.1.4.1.3902.3.6000.604.2.1.50.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPMatchSourceAclSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.50.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSourceAclName 1.3.6.1.4.1.3902.3.6000.604.2.1.50.1.3 displaystring no-access
Name of an access-list(1-31 characters). Each sequence has 10 match ip source items at most.
                           zxr10RMAPSourceIsConfigAcl 1.3.6.1.4.1.3902.3.6000.604.2.1.50.1.4 truthvalue no-access
It expresses that this config is match ip source by acl.
                           zxr10RMAPMatchSourceAclRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.50.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchIpSourcePflTable 1.3.6.1.4.1.3902.3.6000.604.2.1.51 no-access
Route-map Match IpSource Table(match ip source by pfl)
                       zxr10RMAPMatchIpSourcePflEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.51.1 no-access
Match Source ip address of route or match packet. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. Otherwise, It conflicts with the item that match ip source by acl.
                           zxr10RMAPMatchSourcePflName 1.3.6.1.4.1.3902.3.6000.604.2.1.51.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPMatchSourcePflSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.51.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSourcePflName 1.3.6.1.4.1.3902.3.6000.604.2.1.51.1.3 displaystring no-access
Name of a prefix list (1-31 characters). Each sequence has 10 match ip source items at most.
                           zxr10RMAPSourceIsConfigPfl 1.3.6.1.4.1.3902.3.6000.604.2.1.51.1.4 truthvalue no-access
It expresses that this config is match ip source by pfl.
                           zxr10RMAPMatchSourcePflRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.51.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchLocalPrefTable 1.3.6.1.4.1.3902.3.6000.604.2.1.52 no-access
Route-map Match local-preference Table
                       zxr10RMAPMatchLocalPrefEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.52.1 no-access
Match BGP local preference path attribute
                           zxr10RMAPMatchLocalPrefName 1.3.6.1.4.1.3902.3.6000.604.2.1.52.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPMatchLocalPrefSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.52.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPMatchLocalPrefAlg 1.3.6.1.4.1.3902.3.6000.604.2.1.52.1.3 rmapmatchalg read-only
eq Equal as-path length to be matched.Value is 1. ge Minimum as-path length to be matched.Value is 2. le Maximun as-path length to be matched.Value is 3.
                           zxr10RMAPMatchLocalPref 1.3.6.1.4.1.3902.3.6000.604.2.1.52.1.4 unsigned32 read-only
Preference value. The range of config is 0 to 4294967295.
                           zxr10RMAPMatchLocalPrefRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.52.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchOriginTable 1.3.6.1.4.1.3902.3.6000.604.2.1.53 no-access
Route-map Match Origin Table
                       zxr10RMAPMatchOriginEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.53.1 no-access
Match BGP origin code
                           zxr10RMAPMatchOriginName 1.3.6.1.4.1.3902.3.6000.604.2.1.53.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPMatchOriginSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.53.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPMatchOrigin 1.3.6.1.4.1.3902.3.6000.604.2.1.53.1.3 rmapsetorigin read-only
egp Remote EGP.Value is 2. igp Local IGP.Value is 1. incomplete Unknown heritage.Value is 3. 0 is invalid value.
                           zxr10RMAPMatchOriginRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.53.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetPathSelTable 1.3.6.1.4.1.3902.3.6000.604.2.1.54 no-access
Route-map Set Path-selection Table
                       zxr10RMAPSetPathSelEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.54.1 no-access
Set BGP path-selection
                           zxr10RMAPSetPathSelName 1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetPathSelSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetPathSelPath 1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.3 rmapsetpath read-only
all Path for imitating iBGP full-mesh.Value is 1. backup Path for rapid convergence.Value is 2. best-path Path for load sharing.Value is 3. group-best Path for elimination of routing oscillation.Value is 4.
                           zxr10RMAPSetPathSelNum 1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.4 integer32 read-only
Path numbers. The range of config is 1 to 32.
                           zxr10RMAPSetPathSelInstall 1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.5 rmapsetpathinstall read-only
Manner of sending to forwarding table.
                           zxr10RMAPSetPathSelMulpro 1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.6 rmapsetpathmulpro read-only
Manner of sending to forwarding table.
                           zxr10RMAPSetPathSelAdvertise 1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.7 rmapsetpathadvertise read-only
Advertising the path selected outward.
                           zxr10RMAPSetPathSelRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetPolicyPrioTable 1.3.6.1.4.1.3902.3.6000.604.2.1.55 no-access
Route-map Set Policy-priority Table
                       zxr10RMAPSetPolicyPrioEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.55.1 no-access
Set policy priority for PBR
                           zxr10RMAPSetPolicyPrioName 1.3.6.1.4.1.3902.3.6000.604.2.1.55.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetPolicyPrioSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.55.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetPolicyPrio 1.3.6.1.4.1.3902.3.6000.604.2.1.55.1.3 integer32 read-only
Value of policy priority. The range of config is 0 to 7.
                           zxr10RMAPSetPolicyPrioRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.55.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchIpAlgMetricTable 1.3.6.1.4.1.3902.3.6000.604.2.1.56 no-access
Route-map Match Ip Metric Table
                       zxr10RMAPMatchIpAlgMetricEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.56.1 no-access
Match address of route or match packet. This match item sets the route-map with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type.
                           zxr10RMAPMatchIpAlgMetricName 1.3.6.1.4.1.3902.3.6000.604.2.1.56.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPMatchIpAlgMetricSeq 1.3.6.1.4.1.3902.3.6000.604.2.1.56.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPMatchIpAlgMetricAlg 1.3.6.1.4.1.3902.3.6000.604.2.1.56.1.3 rmapmatchalg read-only
eq Equal matric length to be matched.Value is 1. ge Minimum matric length to be matched.Value is 2. le Maximun matric length to be matched.Value is 3.
                           zxr10RMAPMatchIpAlgMetric 1.3.6.1.4.1.3902.3.6000.604.2.1.56.1.4 unsigned32 read-only
Metric value. The range of config is 0 to 4294967295.
                           zxr10RMAPIpAlgMetricRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.56.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchIpv6AlgMetricTable 1.3.6.1.4.1.3902.3.6000.604.2.1.57 no-access
Route-map Match Ipv6 Metric Table
                       zxr10RMAPMatchIpv6AlgMetricEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.57.1 no-access
Match address of route or match packet. This match item sets the route-map with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
                           zxr10RMAPMatchIpv6AlgMetricName 1.3.6.1.4.1.3902.3.6000.604.2.1.57.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPMatchIpv6AlgMetricSeq 1.3.6.1.4.1.3902.3.6000.604.2.1.57.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPMatchIpv6AlgMetricAlg 1.3.6.1.4.1.3902.3.6000.604.2.1.57.1.3 rmapmatchalg read-only
eq Equal matric length to be matched.Value is 1. ge Minimum matric length to be matched.Value is 2. le Maximun matric length to be matched.Value is 3.
                           zxr10RMAPMatchIpv6AlgMetric 1.3.6.1.4.1.3902.3.6000.604.2.1.57.1.4 unsigned32 read-only
Metric value. The range of config is 0 to 4294967295.
                           zxr10RMAPIpv6AlgMetricRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.57.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetTraffIdxTable 1.3.6.1.4.1.3902.3.6000.604.2.1.58 no-access
Route-map Set Traffic-index Table
                       zxr10RMAPSetTraffIdxEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.58.1 no-access
Set BGP traffic index
                           zxr10RMAPSetTraffIdxName 1.3.6.1.4.1.3902.3.6000.604.2.1.58.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetTraffIdxSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.58.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetTraffIdx 1.3.6.1.4.1.3902.3.6000.604.2.1.58.1.3 integer32 read-only
Traffic-index number. The range of config is 1 to 63.
                           zxr10RMAPSetTraffIdxRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.58.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchIpv6AddrPflTable 1.3.6.1.4.1.3902.3.6000.604.2.1.59 no-access
Route-map Match Ipv6Address pfl Table
                       zxr10RMAPMatchIpv6AddrPflEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.59.1 no-access
Match address of route or match packet. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
                           zxr10RMAPIpv6AddrPflName 1.3.6.1.4.1.3902.3.6000.604.2.1.59.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPIpv6AddrPflSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.59.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPIpv6AddrPfl 1.3.6.1.4.1.3902.3.6000.604.2.1.59.1.3 displaystring no-access
Name of an access-list(1-31 characters). Each sequence has 10 match ipv6 address items at most.
                           zxr10RMAPIpv6IsConfigPfl 1.3.6.1.4.1.3902.3.6000.604.2.1.59.1.4 truthvalue no-access
It expresses that this config is match ipv6 address by pfl.
                           zxr10RMAPIpv6AddrPflRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.59.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetNextHopPeerAddrTable 1.3.6.1.4.1.3902.3.6000.604.2.1.60 no-access
Route-map Set NextHop Table
                       zxr10RMAPSetNextHopPeerAddrEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.60.1 no-access
Set IP address of next hop. It conflicts with these set items below: set vrf set global
                           zxr10RMAPSetNextHopPeerAddrName 1.3.6.1.4.1.3902.3.6000.604.2.1.60.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetNextHopPeerAddrSeq 1.3.6.1.4.1.3902.3.6000.604.2.1.60.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetNextHopAddr 1.3.6.1.4.1.3902.3.6000.604.2.1.60.1.3 ipaddress no-access
IP address of next hop. 0 is invalid value. Each sequence has 10 set next-hop items at most.
                           zxr10RMAPSetNextHopPeerAddr 1.3.6.1.4.1.3902.3.6000.604.2.1.60.1.4 integer32 no-access
Peer address for BGP.
                           zxr10RMAPSetNHorPeerAddRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.60.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetIpv6NHorPeerAddTable 1.3.6.1.4.1.3902.3.6000.604.2.1.61 no-access
Route-map Set IpNextHop Table
                       zxr10RMAPSetIpv6NHorPeerAddEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.61.1 no-access
Set Next hop address. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type. It conflicts with these set items below: set vrf set global
                           zxr10RMAPSetIpv6NHorPeerAddName 1.3.6.1.4.1.3902.3.6000.604.2.1.61.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetIpv6NHorPeerAddSeq 1.3.6.1.4.1.3902.3.6000.604.2.1.61.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetIpv6NextHopAddr 1.3.6.1.4.1.3902.3.6000.604.2.1.61.1.3 ipv6address no-access
IPv6 address of next hop. 0 is invalid value. Each sequence has 10 set ipv6 next-hop items at most.
                           zxr10RMAPSetIpv6NextHopPeerAddr 1.3.6.1.4.1.3902.3.6000.604.2.1.61.1.4 integer32 no-access
Peer address for BGP.
                           zxr10RMAPSetv6NHorPeerRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.61.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPMatchEvpnTable 1.3.6.1.4.1.3902.3.6000.604.2.1.62 no-access
Route-map match EVPN table
                       zxr10RMAPMatchEvpnEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.62.1 no-access
Match BGP EVPN route
                           zxr10RMAPMatchEvpnName 1.3.6.1.4.1.3902.3.6000.604.2.1.62.1.1 displaystring no-access
Name of route-map (1-31 characters)
                           zxr10RMAPMatchEvpnSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.62.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPMatchEvpn 1.3.6.1.4.1.3902.3.6000.604.2.1.62.1.3 integer32 no-access
EVPN route type. 1: Ethernet Auto-Discovery (A-D) route; 2: MAC/IP Advertisement route; 3: Inclusive Multicast Ethernet Tag route; 4: Ethernet Segment route; 5: IP Prefix route.
                           zxr10RMAPMatchEvpnRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.62.1.100 rowstatus read-only
Row status
                 zxr10RMAPBlackHoleRouteTable 1.3.6.1.4.1.3902.3.6000.604.2.1.63 no-access
Route-map black hole route table
                       zxr10RMAPBlackHoleRouteEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.63.1 no-access
Black hole route which outcoming interface is null.
                           zxr10RMAPBlackHoleRouteName 1.3.6.1.4.1.3902.3.6000.604.2.1.63.1.1 displaystring no-access
Name of route-map (1-31 characters)
                           zxr10RMAPBlackHoleRouteSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.63.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPBlackHoleRouteEnable 1.3.6.1.4.1.3902.3.6000.604.2.1.63.1.3 integer read-only
Black hole route enable. Enumeration: 'true': 1, 'false': 255.
                           zxr10RMAPBlackHoleRouteRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.63.1.100 rowstatus read-only
Row status
                 zxr10RMAPDefaultRouteTable 1.3.6.1.4.1.3902.3.6000.604.2.1.64 no-access
Route-map default route table
                       zxr10RMAPDefaultRouteEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.64.1 no-access
Default route
                           zxr10RMAPDefaultRouteName 1.3.6.1.4.1.3902.3.6000.604.2.1.64.1.1 displaystring no-access
Name of route-map (1-31 characters)
                           zxr10RMAPDefaultRouteSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.64.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPDefaultRouteEnable 1.3.6.1.4.1.3902.3.6000.604.2.1.64.1.3 integer read-only
Default route enable. Enumeration: 'true': 1, 'false': 255.
                           zxr10RMAPDefaultRouteRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.64.1.100 rowstatus read-only
Row status
                 zxr10RMAPStrictPolicyTable 1.3.6.1.4.1.3902.3.6000.604.2.1.65 no-access
Route-map strict policy table
                       zxr10RMAPStrictPolicyEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.65.1 no-access
Strict policy
                           zxr10RMAPStrictPolicyName 1.3.6.1.4.1.3902.3.6000.604.2.1.65.1.1 displaystring no-access
Name of route-map (1-31 characters)
                           zxr10RMAPStrictPolicySequence 1.3.6.1.4.1.3902.3.6000.604.2.1.65.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPStrictPolicyEnable 1.3.6.1.4.1.3902.3.6000.604.2.1.65.1.3 integer read-only
Strict policy enable. Enumeration: 'true': 1, 'false': 255.
                           zxr10RMAPStrictPolicyRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.65.1.100 rowstatus read-only
Row status
                 zxr10RMAPSetPathListTable 1.3.6.1.4.1.3902.3.6000.604.2.1.66 no-access
Route-map set IPv4 path list table
                       zxr10RMAPSetPathListEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.66.1 no-access
Set output interfaces. This set item supports these types of interface: [PORT-CLASS-FEI,PORT-CLASS-GEI-END]. This set item sets the route-map name with IPv4 type. It conflicts with other match or set items which set the route-map name with IPv6 type and zxr10RMAPSetIpPathListTable. It conflicts with these set items below: set vrf set global
                           zxr10RMAPSetPathListName 1.3.6.1.4.1.3902.3.6000.604.2.1.66.1.1 displaystring no-access
Name of route-map (1-31 characters)
                           zxr10RMAPSetPathListSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.66.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetPathListIntf 1.3.6.1.4.1.3902.3.6000.604.2.1.66.1.3 displaystring no-access
Name of interface (1-31 characters)
                           zxr10RMAPSetPathListNextHop 1.3.6.1.4.1.3902.3.6000.604.2.1.66.1.4 ipaddress no-access
IP address of next hop.0 is invalid value.
                           zxr10RMAPSetPathListRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.66.1.100 rowstatus read-only
Row status
                 zxr10RMAPSetPathList6Table 1.3.6.1.4.1.3902.3.6000.604.2.1.67 no-access
Route-map set Ipv6 path list table
                       zxr10RMAPSetPathList6Entry 1.3.6.1.4.1.3902.3.6000.604.2.1.67.1 no-access
Set output interface. This set item supports these types of interface: [PORT-CLASS-FEI,PORT-CLASS-GEI-END]. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type and zxr10RMAPSetIpv6PathTable. It conflicts with these set items below: set vrf set global
                           zxr10RMAPSetPathList6Name 1.3.6.1.4.1.3902.3.6000.604.2.1.67.1.1 displaystring no-access
Name of route-map (1-31 characters)
                           zxr10RMAPSetPathList6Sequence 1.3.6.1.4.1.3902.3.6000.604.2.1.67.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetPathList6Intf 1.3.6.1.4.1.3902.3.6000.604.2.1.67.1.3 displaystring no-access
Name of interface (1-31 characters)
                           zxr10RMAPSetPathList6NextHop 1.3.6.1.4.1.3902.3.6000.604.2.1.67.1.4 ipv6address no-access
IPv6 address of next hop.0 is invalid value.
                           zxr10RMAPSetPathList6RowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.67.1.100 rowstatus read-only
Row status
                 zxr10RMAPSetVxlanTunnelSrcTable 1.3.6.1.4.1.3902.3.6000.604.2.1.68 no-access
Route-map set VXLAN tunnel source table
                       zxr10RMAPSetVxlanTunnelSrcEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.68.1 no-access
Route-map set VXLAN tunnel source entry
                           zxr10RMAPSetVxlanTunnelSrcName 1.3.6.1.4.1.3902.3.6000.604.2.1.68.1.1 displaystring no-access
Name of route-map (1-31 characters)
                           zxr10RMAPSetVxlanTunnelSrcSeq 1.3.6.1.4.1.3902.3.6000.604.2.1.68.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetVxlanTunnelSrcAddr 1.3.6.1.4.1.3902.3.6000.604.2.1.68.1.3 ipaddress read-only
IP address of VXLAN tunnel source.
                           zxr10RMAPVxlanTunnelSrcRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.68.1.100 rowstatus read-only
Row status
                 zxr10RMAPSetEvpnMacIntfTable 1.3.6.1.4.1.3902.3.6000.604.2.1.69 no-access
Route-map set EVPN router's MAC interface table
                       zxr10RMAPSetEvpnMacIntfEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.69.1 no-access
Route-map set EVPN router's MAC interface entry
                           zxr10RMAPSetEvpnMacIntfName 1.3.6.1.4.1.3902.3.6000.604.2.1.69.1.1 displaystring no-access
Name of route-map (1-31 characters)
                           zxr10RMAPSetEvpnMacIntfSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.69.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetEvpnMacIntf 1.3.6.1.4.1.3902.3.6000.604.2.1.69.1.3 displaystring read-only
Name of interface (1-31 characters)
                           zxr10RMAPSetEvpnMacIntfRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.69.1.100 rowstatus read-only
Row status
                 zxr10RMAPSetL2vniLabelTable 1.3.6.1.4.1.3902.3.6000.604.2.1.70 no-access
Route-map set l2-vni label table
                       zxr10RMAPSetL2vniLabelEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.70.1 no-access
Route-map set l2-vni label entry
                           zxr10RMAPSetL2vniLabelName 1.3.6.1.4.1.3902.3.6000.604.2.1.70.1.1 displaystring no-access
Name of route-map (1-31 characters)
                           zxr10RMAPSetL2vniLabelSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.70.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetL2vniLabel 1.3.6.1.4.1.3902.3.6000.604.2.1.70.1.3 integer32 read-only
The value of l2-vni label.
                           zxr10RMAPSetL2vniLabelRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.70.1.100 rowstatus read-only
Row status
                 zxr10RMAPSetL3vniLabelTable 1.3.6.1.4.1.3902.3.6000.604.2.1.71 no-access
Route-map set l3-vni label table
                       zxr10RMAPSetL3vniLabelEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.71.1 no-access
Route-map set l3-vni label entry
                           zxr10RMAPSetL3vniLabelName 1.3.6.1.4.1.3902.3.6000.604.2.1.71.1.1 displaystring no-access
Name of route-map (1-31 characters)
                           zxr10RMAPSetL3vniLabelSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.71.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetL3vniLabel 1.3.6.1.4.1.3902.3.6000.604.2.1.71.1.3 integer32 read-only
The value of l3-vni label.
                           zxr10RMAPSetL3vniLabelRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.71.1.100 rowstatus read-only
Row status
                 zxr10RMAPMatchL3VniLabelTable 1.3.6.1.4.1.3902.3.6000.604.2.1.72 no-access
Route-map match l3-vni label table
                       zxr10RMAPMatchL3VniLabelEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.72.1 no-access
Route-map match l3-vni label entry
                           zxr10RMAPMatchL3VniLabelName 1.3.6.1.4.1.3902.3.6000.604.2.1.72.1.1 displaystring no-access
Name of route-map (1-31 characters)
                           zxr10RMAPMatchL3VniLabelSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.72.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPMatchL3VniLabel 1.3.6.1.4.1.3902.3.6000.604.2.1.72.1.3 integer32 read-only
The value of l3-vni label.
                           zxr10RMAPMatchL3VniLabelStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.72.1.100 rowstatus read-only
Row status
                 zxr10RMAPMatchL2VniLabelTable 1.3.6.1.4.1.3902.3.6000.604.2.1.73 no-access
Route-map match l2-vni label table
                       zxr10RMAPMatchL2VniLabelEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.73.1 no-access
Route-map match l2-vni label entry
                           zxr10RMAPMatchL2VniLabelName 1.3.6.1.4.1.3902.3.6000.604.2.1.73.1.1 displaystring no-access
Name of route-map (1-31 characters)
                           zxr10RMAPMatchL2VniLabelSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.73.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPMatchL2VniLabel 1.3.6.1.4.1.3902.3.6000.604.2.1.73.1.3 integer32 read-only
The value of l2-vni label.
                           zxr10RMAPMatchL2VniLabelStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.73.1.100 rowstatus read-only
Row status
                 zxr10RMAPMatchPlyRtIdTable 1.3.6.1.4.1.3902.3.6000.604.2.1.74 no-access
Route-map match policy-route-id table
                       zxr10RMAPMatchPlyRtIdEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.74.1 no-access
Route-map match policy-route-id entry
                           zxr10RMAPMatchPlyRtIdName 1.3.6.1.4.1.3902.3.6000.604.2.1.74.1.1 displaystring no-access
Name of route-map (1-31 characters)
                           zxr10RMAPMatchPlyRtIdSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.74.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPMatchPlyRtId 1.3.6.1.4.1.3902.3.6000.604.2.1.74.1.3 integer32 no-access
The value of policy-route-id.
                           zxr10RMAPMatchPlyRtIdDeriction 1.3.6.1.4.1.3902.3.6000.604.2.1.74.1.4 integer no-access
The deriction of policy-route-id. Enumeration: 'source': 2, 'distination': 1.
                           zxr10RMAPMatchPlyRtIdStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.74.1.100 rowstatus read-only
Row status
                 zxr10RMAPMatchIpv6PlyRtIdTable 1.3.6.1.4.1.3902.3.6000.604.2.1.75 no-access
Route-map match ipv6 policy-route-id table
                       zxr10RMAPMatchIpv6PlyRtIdEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.75.1 no-access
Route-map match ipv6 policy-route-id entry
                           zxr10RMAPMatchIpv6PlyRtIdName 1.3.6.1.4.1.3902.3.6000.604.2.1.75.1.1 displaystring no-access
Name of route-map (1-31 characters)
                           zxr10RMAPMatchIpv6PlyRtIdSeq 1.3.6.1.4.1.3902.3.6000.604.2.1.75.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPMatchIpv6PlyRtId 1.3.6.1.4.1.3902.3.6000.604.2.1.75.1.3 integer32 no-access
The value of policy-route-id.
                           zxr10RMAPMatchIpv6PlyRtIdDerict 1.3.6.1.4.1.3902.3.6000.604.2.1.75.1.4 integer no-access
The deriction of policy-route-id. Enumeration: 'source': 2, 'distination': 1.
                           zxr10RMAPMatchIpv6PlyRtIdStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.75.1.100 rowstatus read-only
Row status
                 zxr10RMAPSetPlyRtIdTable 1.3.6.1.4.1.3902.3.6000.604.2.1.76 no-access
Route-map set policy-route-id table
                       zxr10RMAPSetPlyRtIdEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.76.1 no-access
Route-map set policy-route-id entry
                           zxr10RMAPSetPlyRtIdName 1.3.6.1.4.1.3902.3.6000.604.2.1.76.1.1 displaystring no-access
Name of route-map (1-31 characters)
                           zxr10RMAPSetPlyRtIdSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.76.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetPlyRtId 1.3.6.1.4.1.3902.3.6000.604.2.1.76.1.3 integer32 read-only
The value of policy-route-id.
                           zxr10RMAPSetPlyRtIdStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.76.1.100 rowstatus read-only
Row status
                 zxr10RMAPSetMonitorGroupIdTable 1.3.6.1.4.1.3902.3.6000.604.2.1.77 no-access
Route-map set monitor-group-id table
                       zxr10RMAPSetMonitorGroupIdEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.77.1 no-access
Route-map set monitor-group-id entry
                           zxr10RMAPSetMonitorGroupIdName 1.3.6.1.4.1.3902.3.6000.604.2.1.77.1.1 displaystring no-access
Name of route-map (1-31 characters)
                           zxr10RMAPSetMonitorGroupIdSeq 1.3.6.1.4.1.3902.3.6000.604.2.1.77.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetMonitorGroupId 1.3.6.1.4.1.3902.3.6000.604.2.1.77.1.3 integer32 read-only
The value of policy-route-id.
                           zxr10RMAPSetMonitorGroupIdStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.77.1.100 rowstatus read-only
Row status
                 zxr10RMAPLoadShareTable 1.3.6.1.4.1.3902.3.6000.604.2.1.78 no-access
Route-map load share table
                       zxr10RMAPLoadShareEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.78.1 no-access
Load share
                           zxr10RMAPLoadShareName 1.3.6.1.4.1.3902.3.6000.604.2.1.78.1.1 displaystring no-access
Name of route-map (1-31 characters)
                           zxr10RMAPLoadShareSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.78.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPLoadShareEnable 1.3.6.1.4.1.3902.3.6000.604.2.1.78.1.3 integer32 read-only
Load share enable.
                           zxr10RMAPLoadShareStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.78.1.100 rowstatus read-only
Row status
                 zxr10RMAPContinueTable 1.3.6.1.4.1.3902.3.6000.604.2.1.79 no-access
Route-map continue table
                       zxr10RMAPContinueEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.79.1 no-access
Route-map continue entry
                           zxr10RMAPContinueName 1.3.6.1.4.1.3902.3.6000.604.2.1.79.1.1 displaystring no-access
Name of route-map (1-31 characters)
                           zxr10RMAPContinueSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.79.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPContinue 1.3.6.1.4.1.3902.3.6000.604.2.1.79.1.3 integer32 read-only
The value of continue sequence.
                           zxr10RMAPContinueNext 1.3.6.1.4.1.3902.3.6000.604.2.1.79.1.4 integer32 read-only
Continue next.
                           zxr10RMAPContinueStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.79.1.100 rowstatus read-only
Row status
                 zxr10RMAPTimeRangeTable 1.3.6.1.4.1.3902.3.6000.604.2.1.80 no-access
Route-map Match IpNextHop Table
                       zxr10RMAPTimeRangeEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.80.1 no-access
Route-map time range.
                           zxr10RMAPTimeRangeName 1.3.6.1.4.1.3902.3.6000.604.2.1.80.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPTimeRangeSequence 1.3.6.1.4.1.3902.3.6000.604.2.1.80.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPTimeRange 1.3.6.1.4.1.3902.3.6000.604.2.1.80.1.3 displaystring read-only
Name of time range(1-31 characters).
                           zxr10RMAPTimeRangeStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.80.1.100 rowstatus read-only
RowStatus
                 zxr10RMAPSetCommunityNameTable 1.3.6.1.4.1.3902.3.6000.604.2.1.81 no-access
Route-map Set Community Table
                       zxr10RMAPSetCommunityNameEntry 1.3.6.1.4.1.3902.3.6000.604.2.1.81.1 no-access
Set BGP community name.
                           zxr10RMAPSetCommunityName 1.3.6.1.4.1.3902.3.6000.604.2.1.81.1.1 displaystring no-access
Name of Route-map (1-31 characters)
                           zxr10RMAPSetCommunitySequence 1.3.6.1.4.1.3902.3.6000.604.2.1.81.1.2 integer32 no-access
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
                           zxr10RMAPSetCommunityIsAddtive 1.3.6.1.4.1.3902.3.6000.604.2.1.81.1.3 rmapsetcomm no-access
additive Add to the existing community. Value is 5.
                           zxr10RMAPSetCommunityListName 1.3.6.1.4.1.3902.3.6000.604.2.1.81.1.4 displaystring no-access
Community list name (1-31 characters)
                           zxr10RMAPSetCommunityRowStatus 1.3.6.1.4.1.3902.3.6000.604.2.1.81.1.100 rowstatus read-only
RowStatus
         zxr10RMAPNotifications 1.3.6.1.4.1.3902.3.6000.604.3
         zxr10RMAPConformance 1.3.6.1.4.1.3902.3.6000.604.4