ZXR10-LSP-MAN-MIB: View SNMP OID List / Download MIB

VENDOR: ZHONGXING TELECOM CO.,LTD. (ABBR. ZTE)


 Home MIB: ZXR10-LSP-MAN-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zxr10LspManMIB 1.3.6.1.4.1.3902.3.6000.401
This MIB module provides commonly used textual conventions for lsp manager.
         zxr10LspManGlobalObjects 1.3.6.1.4.1.3902.3.6000.401.1
             zxr10LspManGrEnable 1.3.6.1.4.1.3902.3.6000.401.1.1 integer read-only
The config of gr service status for PSS module. 1: means Gr of PSS module is disable. 2: means Gr of PSS module is enable. Enumeration: 'enable': 2, 'disable': 1.
         zxr10LspManObjects 1.3.6.1.4.1.3902.3.6000.401.2
             zxr10LspmFwdTable 1.3.6.1.4.1.3902.3.6000.401.2.1 no-access
A tabel of label forward information.
                 zxr10LspmFwdEntry 1.3.6.1.4.1.3902.3.6000.401.2.1.1 no-access
An entry to label forward table.
                     zxr10LspmFwdDestAddr 1.3.6.1.4.1.3902.3.6000.401.2.1.1.1 ipaddress no-access
The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table-access mechanisms defined by the network management protocol in use.
                     zxr10LspmFwdDestMask 1.3.6.1.4.1.3902.3.6000.401.2.1.1.2 integer32 no-access
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 8 class-A 16 class-B 24 class-C If the value of the ipRouteDest is 0 (a default route), then the mask value is also 0. It should be noted that all IP routing subsystems implicitly use this mechanism.
                     zxr10LspmFwdOutsegTag 1.3.6.1.4.1.3902.3.6000.401.2.1.1.3 integer32 no-access
This value is used to distinguish out segment who have the same Dest and Mask.In other words, it's a speical id for out segment with the same destination IP address.
                     zxr10LspmFwdNextHop 1.3.6.1.4.1.3902.3.6000.401.2.1.1.4 ipaddress read-only
The IP address of the next hop of this route.(In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
                     zxr10LspmFwdOutIfName 1.3.6.1.4.1.3902.3.6000.401.2.1.1.5 displaystring read-only
The interface name which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
                     zxr10LspmFwdInLabel 1.3.6.1.4.1.3902.3.6000.401.2.1.1.6 unsigned32 read-only
The incoming label of this LSP.
                     zxr10LspmFwdOutLabel 1.3.6.1.4.1.3902.3.6000.401.2.1.1.7 unsigned32 read-only
The outgoing label of this LSP.
                     zxr10LspmFwdSpecialFlag 1.3.6.1.4.1.3902.3.6000.401.2.1.1.8 integer read-only
This flag indicate the link info about this IP address. 1: means it's an master entry,at the sametime,indicate the master link under fast-re-route application. 2: means it's a slave entry under fast-re-route application. 3: means it's a loadshare entry. 4: means none of the above. Enumeration: 'slave': 2, 'loadshare': 3, 'master': 1, 'none': 4.
             zxr10LspInstTable 1.3.6.1.4.1.3902.3.6000.401.2.2 no-access
A tabel of static LSP instance config.
                 zxr10LspInstEntry 1.3.6.1.4.1.3902.3.6000.401.2.2.1 no-access
An entry to static LSP instance table.
                     zxr10LspInstName 1.3.6.1.4.1.3902.3.6000.401.2.2.1.1 displaystring no-access
Static LSP instance name, which is key of instance.
                     zxr10LspInstInLabel 1.3.6.1.4.1.3902.3.6000.401.2.2.1.2 unsigned32 read-only
The incoming label of this Staic LSP instance, label range is static label range.
                     zxr10LspInstDestAddr 1.3.6.1.4.1.3902.3.6000.401.2.2.1.3 ipaddress read-only
IPv4 address, which is the static LSP instance binding to.
                     zxr10LspInstDestMask 1.3.6.1.4.1.3902.3.6000.401.2.2.1.4 ipaddress read-only
IPv4 mask, which is the static LSP instance binding to.
                     zxr10LspInstForceFlag 1.3.6.1.4.1.3902.3.6000.401.2.2.1.5 integer read-only
This flag indicate whether force to advertise incoming label to upstream. 1: means it's not forcing to advertise in-label to upstream. 2: means it's forcing to advertise in-label to upstream. Enumeration: 'enable': 2, 'disable': 1.
                     zxr10LspInstDestFlag 1.3.6.1.4.1.3902.3.6000.401.2.2.1.6 integer read-only
This flag indicate whether bind FEC to the static LSP instance. 1: means FEC is not binding to the static LSP instance. 2: means FEC is binding to the static LSP instance. Enumeration: 'yes': 2, 'no': 1.
             zxr10LspOutsegTable 1.3.6.1.4.1.3902.3.6000.401.2.3 no-access
A tabel of static LSP outsegment config.
                 zxr10LspOutsegEntry 1.3.6.1.4.1.3902.3.6000.401.2.3.1 no-access
An entry to static LSP outsegment table.
                     zxr10LspOutsegInstName 1.3.6.1.4.1.3902.3.6000.401.2.3.1.1 displaystring no-access
The name of static LSP instance, which the out segment belong to.
                     zxr10LspOutsegIfName 1.3.6.1.4.1.3902.3.6000.401.2.3.1.2 displaystring no-access
The interface name which uniquely identifies the local interface through which the next hop of this out segment should be reached. .
                     zxr10LspOutsegNexthop 1.3.6.1.4.1.3902.3.6000.401.2.3.1.3 ipaddress no-access
The IP address of the next hop of this out segment.
                     zxr10LspOutsegLabel 1.3.6.1.4.1.3902.3.6000.401.2.3.1.4 unsigned32 read-only
The outgoing label of this Staic LSP instance..
                     zxr10LspOutsegForceFlag 1.3.6.1.4.1.3902.3.6000.401.2.3.1.5 integer read-only
This flag indicate whether force to use configured label as out-label. 1: means it's not forcing to use configured label as out-label. 2: means it's forcing to use configured label as out-label. Enumeration: 'enable': 2, 'disable': 1.
         zxr10LspManTraps 1.3.6.1.4.1.3902.3.6000.401.3
         zxr10LspManConformance 1.3.6.1.4.1.3902.3.6000.401.4