ZXR10-L2VPN-MIB: View SNMP OID List / Download MIB

VENDOR: ZHONGXING TELECOM CO.,LTD. (ABBR. ZTE)


 Home MIB: ZXR10-L2VPN-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zte 1.3.6.1.4.1.3902
This MIB contains managed object definitions for the ZXROSng L2vpn
           zxr10 1.3.6.1.4.1.3902.3
               zxr10l2vpn 1.3.6.1.4.1.3902.3.104
                       zxr10l2vpnObjects 1.3.6.1.4.1.3902.3.104.10
                             zxr10L2vpnSduTable 1.3.6.1.4.1.3902.3.104.10.1 no-access
Sdu Table. This table contains one entry per sdu table.
                                 zxr10L2vpnSduEntry 1.3.6.1.4.1.3902.3.104.10.1.1 no-access
The parameter of a Sdu entity containing
                                     zxr10L2vpnSduServiceName 1.3.6.1.4.1.3902.3.104.10.1.1.1 displaystring read-only
The name of the service instance.It consists of 'Forwarder' modules connected by pseudowires and Attach Circuit.
                                     zxr10L2vpnSduName 1.3.6.1.4.1.3902.3.104.10.1.1.2 displaystring read-only
The name of Service Distribution Unit (SDU).
                                     zxr10L2vpnSduServiceType 1.3.6.1.4.1.3902.3.104.10.1.1.3 integer read-only
The type of service instance.There are several types of L2VPNs:(1)Virtual Private LAN Service(VPLS), and (2)Ethernet over PW,and (3)Multi-segment Pseudowire(MSPW), and (4)Enhanced-Ethernet over Pseudowire Enumeration: 'unknown': 0, 'enhanced-vpws': 6, 'mspw': 3, 'vpws': 2, 'vpls': 1.
                                     zxr10L2vpnSduRedandancyMgrName 1.3.6.1.4.1.3902.3.104.10.1.1.4 displaystring read-only
The name of Redundency-manager.
                                     zxr10L2vpnSduRedundancyPrimaryPwPeer 1.3.6.1.4.1.3902.3.104.10.1.1.5 ipaddress read-only
The PW's remote endpoint address.
                                     zxr10L2vpnSduRedundancyPrimaryPwVcid 1.3.6.1.4.1.3902.3.104.10.1.1.6 unsigned32 read-only
A non-zero 32-bit connection ID that, together with the PW type, identifies a particular PW. Note that the PW ID and the PW type MUST be the same at both endpoints.
                                     zxr10L2vpnSduRedundancyPrimaryPwVcType 1.3.6.1.4.1.3902.3.104.10.1.1.7 l2vpnpwtype read-only
A 15-bit quantity containing a value that represents the type of PW. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (PWE3)'.
                                     zxr10L2vpnSduRedundancyBackupPwPeer 1.3.6.1.4.1.3902.3.104.10.1.1.8 ipaddress read-only
The PW's remote endpoint address.
                                     zxr10L2vpnSduRedundancyBackupPwVcid 1.3.6.1.4.1.3902.3.104.10.1.1.9 unsigned32 read-only
A non-zero 32-bit connection ID that, together with the PW type, identifies a particular PW. Note that the PW ID and the PW type MUST be the same at both endpoints.
                                     zxr10L2vpnSduRedundancyBackupPwVcType 1.3.6.1.4.1.3902.3.104.10.1.1.10 l2vpnpwtype read-only
A 15-bit quantity containing a value that represents the type of PW. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (PWE3)'.
                             zxr10L2vpnSacTable 1.3.6.1.4.1.3902.3.104.10.2 no-access
Sac Table. This table contains one entry per Sac table.
                                 zxr10L2vpnSacEntry 1.3.6.1.4.1.3902.3.104.10.2.1 no-access
The parameter of a Sac entity containing
                                     zxr10L2vpnSacServiceName 1.3.6.1.4.1.3902.3.104.10.2.1.1 displaystring read-only
The name of the service instance.It consists of 'Forwarder' modules connected by pseudowires and Attach Circuit.
                                     zxr10L2vpnSacName 1.3.6.1.4.1.3902.3.104.10.2.1.2 displaystring read-only
The name of Service Attachment Circuit(SAC).
                                     zxr10L2vpnSacServiceType 1.3.6.1.4.1.3902.3.104.10.2.1.3 integer read-only
The type of service instance.There are several types of L2VPNs:(1)Virtual Private LAN Service(VPLS), and (2)Virtual Private Wire Service(VPWS),and (3)Virtual Local Switching Service(VLSS),and (4)Enhanced-Virtual Private Wire Service(Enhanced-VPWS) ; Enumeration: 'vlss': 4, 'unknown': 0, 'enhanced-vpws': 6, 'vpws': 2, 'vpls': 1.
                                     zxr10L2vpnSacServiceDefine 1.3.6.1.4.1.3902.3.104.10.2.1.4 integer read-only
The parameter of service accesse.There are several parameters of service accesse:(1)ethernt,(2)tdm, (3)ppp,(4)hdlc,(5)fr. Enumeration: 'ethernt': 1, 'fr': 5, 'ppp': 3, 'tdm': 2, 'hdlc': 4.
                                     zxr10L2vpnSacEthSwitchSplitHorizone 1.3.6.1.4.1.3902.3.104.10.2.1.5 integer read-only
Split-horizon attribute which used in E-tree service includes two types client/server Enumeration: 'on': 1, 'null': 0, 'off': 2.
                                     zxr10L2vpnSacEthIngressAdjustType 1.3.6.1.4.1.3902.3.104.10.2.1.20 integer read-only
The Type of VLAN tag ingress-adjustment.It consists of (1)needless,(2)push,(3)pop-outermost,(4)rewrite Enumeration: 'push': 2, 'unknown': 0, 'pop-outermost': 3, 'rewrite': 4, 'needless': 1.
                                     zxr10L2vpnSacEthPushedTag 1.3.6.1.4.1.3902.3.104.10.2.1.21 integer32 read-only
A service-delimiting tag which pushed onto the incoming packets.
                                     zxr10L2vpnSacEthRewriteTargetTag 1.3.6.1.4.1.3902.3.104.10.2.1.22 integer32 read-only
A VLAN tag which rewirted to replace the service-delimiting tags.
                                     zxr10L2vpnSacTdmJitterBuffer 1.3.6.1.4.1.3902.3.104.10.2.1.23 integer32 read-only
The jitter-buffer size of TDM emulation.
                                     zxr10L2vpnSacTdmDistributePeriod 1.3.6.1.4.1.3902.3.104.10.2.1.24 integer32 read-only
Tthe period of distributing TDM packets to remote end-point.
                                     zxr10L2vpnSacTdmTimeslots 1.3.6.1.4.1.3902.3.104.10.2.1.25 unsigned32 read-only
The time of TDM slots.
                                     zxr10L2vpnSacTdmStructureType 1.3.6.1.4.1.3902.3.104.10.2.1.26 integer read-only
The structure type of TDM emulation. Enumeration: 'agnostic': 2, 'aware-with-cas': 3, 'aware': 1.
                                     zxr10L2vpnSacEthSwitchGroupID 1.3.6.1.4.1.3902.3.104.10.2.1.27 integer32 read-only
Split-horizon-Group attribute.
                                     zxr10L2vpnSacInterworking 1.3.6.1.4.1.3902.3.104.10.2.1.28 integer read-only
The name of SacInterworking. Enumeration: 'ip': 1, 'none': 0, 'ethernet': 2.
                                     zxr10L2vpnSacInterworkingIpLocalCeMac 1.3.6.1.4.1.3902.3.104.10.2.1.29 displaystring read-only
The LocalCeMac of SacInterworking.
                             zxr10L2vpnRedundancyTable 1.3.6.1.4.1.3902.3.104.10.3 no-access
Redundancy Table. This table contains one entry per Redundancy table.
                                 zxr10L2vpnRedundancyEntry 1.3.6.1.4.1.3902.3.104.10.3.1 no-access
The parameter of a Redundancy entity containing
                                     zxr10L2vpnRedundancyName 1.3.6.1.4.1.3902.3.104.10.3.1.1 displaystring read-only
The name of redundency-management.
                                     zxr10L2vpnRedundancySduName 1.3.6.1.4.1.3902.3.104.10.3.1.2 displaystring read-only
The name of Service Distribution Unit (SDU) belongs to the exact redundency-management instance.
                                     zxr10L2vpnRedundancyProtectMode 1.3.6.1.4.1.3902.3.104.10.3.1.3 integer read-only
The protectmode of redundency-management instance. There are two modes: (1)oneByOne, (2)onePlusOne Enumeration: 'oneByOne': 1, 'onePlusOne': 2.
                                     zxr10L2vpnRedundancyPfsNegoMode 1.3.6.1.4.1.3902.3.104.10.3.1.4 integer read-only
Configure the negotiation mode which include four modes :(1) unsupported, (2)independent, (3)master, (4)slave. Enumeration: 'independent': 2, 'slave': 4, 'master': 3, 'unsupported': 1.
                                     zxr10L2vpnRedundancyProtectPolicy 1.3.6.1.4.1.3902.3.104.10.3.1.5 integer read-only
The protect-policy of transforming primary-pw into backup-pw.There are two policies:(1)immediately, (2)delayed. Enumeration: 'immediately': 1, 'delayed': 2.
                                     zxr10L2vpnRedundancyProtectDelayTime 1.3.6.1.4.1.3902.3.104.10.3.1.6 integer32 read-only
The time of transforming primary-pw into backup-pw.
                                     zxr10L2vpnRedundancyRevertPolicy 1.3.6.1.4.1.3902.3.104.10.3.1.7 integer read-only
The protectpolicy of transforming primary-pw from backup-pw. There are two policies:(1)immediately, (2)delayed. Enumeration: 'immediately': 1, 'never': 3, 'delayed': 2.
                                     zxr10L2vpnRedundancyRevertDelayTime 1.3.6.1.4.1.3902.3.104.10.3.1.8 integer32 read-only
The time of transforming primary-pw from backup-pw.
                                     zxr10L2vpnRedundancyActivePWs 1.3.6.1.4.1.3902.3.104.10.3.1.9 integer read-only
The statues of current active-pws.There are three statues:(1)primary,(2)backup,(3)none. Enumeration: 'none': 3, 'backup': 2, 'primary': 1.
                                     zxr10L2vpnRedundancyStandbyPWs 1.3.6.1.4.1.3902.3.104.10.3.1.10 integer read-only
The statues of current standby-pws.There are three statues:(1)primary,(2)backup,(3)none. Enumeration: 'none': 3, 'backup': 2, 'primary': 1.
                                     zxr10L2vpnRedundancyInvalidPWs 1.3.6.1.4.1.3902.3.104.10.3.1.11 integer read-only
The statues of current invalid-pws.There are three statues:(1)primary,(2)backup,(3)none. Enumeration: 'none': 3, 'backup': 2, 'primary': 1.
                                     zxr10L2vpnRedundancyProtectionCount 1.3.6.1.4.1.3902.3.104.10.3.1.12 counter32 read-only
The total number of the pws switchover. Transforming primary-pw into backup-pw or transforming primary-pw from backup-pw means one.
                                     zxr10L2vpnRedundancyLastProtectionTime 1.3.6.1.4.1.3902.3.104.10.3.1.13 unsigned32 read-only
The time of the last switchover, which ransform primary-pw into backup-pw or transform primary-pw from backup-pw.
                             zxr10L2vpnPwTable 1.3.6.1.4.1.3902.3.104.10.4 no-access
Pw Table. This table contains one entry per pw table.
                                 zxr10L2vpnPwEntry 1.3.6.1.4.1.3902.3.104.10.4.1 no-access
The parameter of a pw entity containing statistics information about a particular PW.
                                     zxr10L2vpnPwPeer 1.3.6.1.4.1.3902.3.104.10.4.1.1 ipaddress read-only
The PW's remote endpoint address.
                                     zxr10L2vpnPwVcid 1.3.6.1.4.1.3902.3.104.10.4.1.2 unsigned32 read-only
A non-zero 32-bit connection ID that, together with the PW type, identifies a particular PW. Note that the PW ID and the PW type MUST be the same at both endpoints.
                                     zxr10L2vpnPwVcType 1.3.6.1.4.1.3902.3.104.10.4.1.3 l2vpnpwtype read-only
A 15-bit quantity containing a value that represents the type of PW. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (PWE3)'.
                                     zxr10L2vpnPwSduName 1.3.6.1.4.1.3902.3.104.10.4.1.4 displaystring read-only
The name of Service Distribution Unit (SDU).
                                     zxr10L2vpnPwServiceName 1.3.6.1.4.1.3902.3.104.10.4.1.5 displaystring read-only
The name of the service instance.It consists of 'Forwarder' modules connected by pseudowires and Attach Circuit.
                                     zxr10L2vpnPwServiceType 1.3.6.1.4.1.3902.3.104.10.4.1.6 integer read-only
The type of service instance.There are several types of L2VPNs:(1)Virtual Private LAN Service(VPLS), and (2)Ethernet over PW,and (3)Multi-segment Pseudowire(MSPW), and (4)Virtual Local Switching Service(VLSS),and (5)Enhanced-Ethernet over Pseudowire Enumeration: 'unknown': 0, 'vpws': 2, 'mspw': 3, 'vpls': 1, 'enhanced-vpws': 6, 'vlss': 4.
                                     zxr10L2vpnPwIsMspwSegment 1.3.6.1.4.1.3902.3.104.10.4.1.7 integer read-only
The MSPW's ability weather the PW is MSPW's member. Enumeration: 'second': 2, 'none': 3, 'first': 1.
                                     zxr10L2vpnPwLocalLabel 1.3.6.1.4.1.3902.3.104.10.4.1.8 integer32 read-only
The PW's local label.When egress LER receives a packet over a pseudowire,the PW's local label must be able to determine that the packet was in fact received over a pseudowire associate with a particular pseudowire, and disposites the packet.In an MPLS-enabled IP network, a PW local label is an MPLS label used to identify packet with a PW that belongs to a particular Virtual Private Network.
                                     zxr10L2vpnPwRemoteLabel 1.3.6.1.4.1.3902.3.104.10.4.1.9 integer32 read-only
The PW's remote label.When ingress LER sends a Layer 2 PDU to remote egress LER,it creates an MPLS packets by adding the PW's remote label to the packet,thus creating the first entry of the label stack.The PW's remote label is not visible again until the MPLS packet reaches the egress LER.
                                     zxr10L2vpnPwSignalType 1.3.6.1.4.1.3902.3.104.10.4.1.10 integer read-only
The type of signaling,including (1)static PW,and (2) the Pwid FEC Element(FEC type 128),and the Generlized Pwid FEC Element(FEC type 129). Enumeration: 'static': 1, 'fec129': 3, 'fec128': 2.
                                     zxr10L2vpnPwLocalGroupId 1.3.6.1.4.1.3902.3.104.10.4.1.11 integer32 read-only
The PW's local GroupId value.It is an arbitrary 32-bit value that represents a group of PWs that is used to create groups in the PW space.The group ID is intended to be used as a port index, or a virtual tunnel index.To simplify configuration, a particular PW ID at ingress could be part of the virtual tunnel for transport to the egress router The Group ID is very useful for sending wild card label withdrawals, or PW wild card status notification messages to remote PEs upon physical port failure.
                                     zxr10L2vpnPwLocalCbit 1.3.6.1.4.1.3902.3.104.10.4.1.12 integer read-only
The PW's local ability weather it is supporting CBit. The bit (C) is used to flag the presence of a control word as follows:C = 1 Control word present on this PW. C = 0 No control word present on this PW. Enumeration: 'on': 1, 'off': 0.
                                     zxr10L2vpnPwLocalMTU 1.3.6.1.4.1.3902.3.104.10.4.1.13 integer32 read-only
The PW's local MTU value.This is the Maximum Transmission Unit, excluding encapsulation overhead, of the egresspacket interface that will be transmitting the decapsulated PDUthat is received from the MPLS-enabled network. This parameter is applicable only to PWs transporting packets and is REQUIRED for these PW types. If this parameter does not match in both directions of a specific PW, that PW MUST NOT be enabled.
                                     zxr10L2vpnPwLocalDescription 1.3.6.1.4.1.3902.3.104.10.4.1.14 displaystring read-only
The PW's local descripton. This arbitrary, and OPTIONAL, interface description string is used to send a human-readable administrative string describing the interface to the remote. This parameter is OPTIONAL and is applicable to all PW types. The interface description parameter string length is variable and can be from 0 to 80 octets. Human-readable text MUST be provided in the UTF-8 charset using the Default Language.
                                     zxr10L2vpnPwLocalStatusWord 1.3.6.1.4.1.3902.3.104.10.4.1.15 unsigned32 read-only
The PW's local status value. Each bit in the status code field can be used to indicate a single failure or an event. When a PW is first set up, the PEs MUST attempt to negotiate the usage of the PW status TLV.
                                     zxr10L2vpnPwLocalStatusSignalAbility 1.3.6.1.4.1.3902.3.104.10.4.1.16 integer read-only
The PW's local status signal ability. Osbits represents support pw operational status notification, PFSbit represents support preferred forwarding status notification, RSSbit represents support requested switchover status notification, None represents do not support any pw status notification. Enumeration: 'osbits': 1, 'none': 4, 'rssbit': 3, 'pfsbit': 2.
                                     zxr10L2vpnPwRemoteGroupId 1.3.6.1.4.1.3902.3.104.10.4.1.17 integer32 read-only
The PW's remote GroupId value.It is an arbitrary 32-bit value that represents a group of PWs that is used to create groups in the PW space.The group ID is intended to be used as a port index, or a virtual tunnel index.To simplify configuration, a particular PW ID at ingress could be part of the virtual tunnel for transport to the egress router The Group ID is very useful for sending wild card label withdrawals, or PW wild card status notification messages to remote PEs upon physical port failure.
                                     zxr10L2vpnPwRemoteCbit 1.3.6.1.4.1.3902.3.104.10.4.1.18 integer read-only
The PW's remote ability weather it is supporting CBit. The bit (C) is used to flag the presence of a control word as follows:C = 1 Control word present on this PW. C = 0 No control word present on this PW. Enumeration: 'on': 1, 'off': 0.
                                     zxr10L2vpnPwRemoteMTU 1.3.6.1.4.1.3902.3.104.10.4.1.19 integer32 read-only
The PW's remote MTU value.This is the Maximum Transmission Unit, excluding encapsulation overhead, of the egresspacket interface that will be transmitting the decapsulated PDUthat is received from the MPLS-enabled network. This parameter is applicable only to PWs transporting packets and is REQUIRED for these PW types. If this parameter does not match in both directions of a specific PW, that PW MUST NOT be enabled.
                                     zxr10L2vpnPwRemoteDescription 1.3.6.1.4.1.3902.3.104.10.4.1.20 displaystring read-only
The PW's remote descripton. This arbitrary, and OPTIONAL, interface description string is used to send a human-readable administrative string describing the interface to the remote. This parameter is OPTIONAL and is applicable to all PW types. The interface description parameter string length is variable and can be from 0 to 80 octets. Human-readable text MUST be provided in the UTF-8 charset using the Default Language.
                                     zxr10L2vpnPwRemoteStatusWord 1.3.6.1.4.1.3902.3.104.10.4.1.21 unsigned32 read-only
The PW's remote status value. Each bit in the status code field can be used to indicate a single failure or an event. When a PW is first set up, the PEs MUST attempt to negotiate the usage of the PW status TLV.
                                     zxr10L2vpnPwRemoteStatusSignalAbility 1.3.6.1.4.1.3902.3.104.10.4.1.22 integer read-only
The PW's remote status signal ability. Osbits represents support pw operational status notification, PFSbit represents support preferred forwarding status notification, RSSbit represents support requested switchover status notification, None represents do not support any pw status notification. Enumeration: 'osbits': 1, 'none': 4, 'rssbit': 3, 'pfsbit': 2.
                                     zxr10L2vpnPwNegoedCbit 1.3.6.1.4.1.3902.3.104.10.4.1.23 integer read-only
The PW's negotiated ability weather it is supporting CBit. The bit (C) is used to flag the presence of a control word as follows:C = 1 Control word present on this PW. C = 0 No control word present on this PW. Enumeration: 'on': 1, 'off': 0.
                                     zxr10L2vpnPwNegoedMTU 1.3.6.1.4.1.3902.3.104.10.4.1.24 integer32 read-only
The PW's negotiated MTU value.This is the Maximum Transmission Unit, excluding encapsulation overhead, of the egresspacket interface that will be transmitting the decapsulated PDUthat is received from the MPLS-enabled network. This parameter is applicable only to PWs transporting packets and is REQUIRED for these PW types. If this parameter does not match in both directions of a specific PW, that PW MUST NOT be enabled.
                                     zxr10L2vpnPwNegoedStatusSignalAbility 1.3.6.1.4.1.3902.3.104.10.4.1.25 integer read-only
The PW's negotiated status signal ability. Osbits represents support pw operational status notification, PFSbit represents support preferred forwarding status notification, RSSbit represents support requested switchover status notification, None represents do not support any pw status notification. Enumeration: 'osbits': 1, 'none': 4, 'rssbit': 3, 'pfsbit': 2.
                                     zxr10L2vpnPwSignalState 1.3.6.1.4.1.3902.3.104.10.4.1.26 integer read-only
The PW's signal state on protocol level. Enumeration: 'down': 0, 'up': 1.
                                     zxr10L2vpnPwVccvLocalParas 1.3.6.1.4.1.3902.3.104.10.4.1.27 unsigned32 read-only
The PW's local VCCV value. This VCCV capability information indicates to the receiving PE which combinations of Control Channel (CC) andConnectivity Verification (CV) Types it is capable of receiving. Ifthe receiving PE agrees to establish the PW, it will return its capabilities in the subsequent signaling message to indicate which CC and CV Types it is capable of processing.
                                     zxr10L2vpnPwVccvRemoteParas 1.3.6.1.4.1.3902.3.104.10.4.1.28 unsigned32 read-only
The PW's remote VCCV value. This VCCV capability information indicates to the receiving PE which combinations of Control Channel (CC) andConnectivity Verification (CV) Types it is capable of receiving. Ifthe receiving PE agrees to establish the PW, it will return its capabilities in the subsequent signaling message to indicate which CC and CV Types it is capable of processing.
                                     zxr10L2vpnPwVccvNegoedParas 1.3.6.1.4.1.3902.3.104.10.4.1.29 unsigned32 read-only
The PW's negotiated VCCV value. This VCCV capability information indicates to the receiving PE which combinations of Control Channel (CC) andConnectivity Verification (CV) Types it is capable of receiving. Ifthe receiving PE agrees to establish the PW, it will return its capabilities in the subsequent signaling message to indicate which CC and CV Types it is capable of processing.
                                     zxr10L2vpnPwPsnOutLabelDepth 1.3.6.1.4.1.3902.3.104.10.4.1.30 integer32 read-only
The layer of MPLS label in the packet when it crosses Core Network.
                                     zxr10L2vpnPwPsnOutLabel1 1.3.6.1.4.1.3902.3.104.10.4.1.31 integer32 read-only
A 20-bit quantity containing a value that represents the botton of MPLS label stack.In L2VPN network, this label means the VC label.
                                     zxr10L2vpnPwPsnOutLabel2 1.3.6.1.4.1.3902.3.104.10.4.1.32 integer32 read-only
A 20-bit quantity containing a value that represents the second layer of MPLS label stack from the bottom of MPLS label.
                                     zxr10L2vpnPwPsnOutLabel3 1.3.6.1.4.1.3902.3.104.10.4.1.33 integer32 read-only
A 20-bit quantity containing a value that represents the third layer of MPLS label stack from the bottom of MPLS label.
                                     zxr10L2vpnPwPsnTunnelType 1.3.6.1.4.1.3902.3.104.10.4.1.34 integer read-only
The tunnel type of Core Network,including (1)LDP label (2)TE label,and (3)BGP label. Enumeration: 'bgp': 3, 'te': 2, 'ldp': 1.
                                     zxr10L2vpnPwPsnTunnelId 1.3.6.1.4.1.3902.3.104.10.4.1.35 integer32 read-only
The tunnel ID number of Core Network.
                                     zxr10L2vpnPwSwitchMacWithdraw 1.3.6.1.4.1.3902.3.104.10.4.1.36 integer read-only
The PW's local ability,whether the PW can send Mac-withdraw message.The bit is used to flag the presence as follows:Switch = 1 can send mac-withdraw message on this PW. Switch = 0 can't sent mac-withdraw message on this PW. Enumeration: 'on': 1, 'off': 0.
                                     zxr10L2vpnPwServiceState 1.3.6.1.4.1.3902.3.104.10.4.1.37 integer read-only
The service-state of PW ,including (1)down, and (2) up,and (3)unknown. Enumeration: 'down': 1, 'unknown': 0, 'up': 2.
                                     zxr10L2vpnPwWorkState 1.3.6.1.4.1.3902.3.104.10.4.1.38 integer read-only
The work-state of PW ,including (1)down, and (2) active,and (3)standby,and (4)unknown. Enumeration: 'active': 1, 'unknown': 0, 'standby': 2, 'down': 3.
                                     zxr10L2vpnPwSwitchSplitHorizone 1.3.6.1.4.1.3902.3.104.10.4.1.39 integer read-only
Split-horizon attribute which used in E-tree service includes two types on/off Enumeration: 'on': 1, 'null': 0, 'off': 2.
                                     zxr10L3vpnPwSwitchGroupID 1.3.6.1.4.1.3902.3.104.10.4.1.40 integer32 read-only
Split-horizon-Group attribute .
                             zxr10L2vpnServiceTable 1.3.6.1.4.1.3902.3.104.10.5 no-access
Service Table. This table contains one entry per Service table.
                                 zxr10L2vpnServiceEntry 1.3.6.1.4.1.3902.3.104.10.5.1 no-access
The parameter of a Service entity containing
                                     zxr10L2vpnServiceName 1.3.6.1.4.1.3902.3.104.10.5.1.1 displaystring read-only
The name of the service instance.It consists of 'Forwarder' modules connected by pseudowires and Attach Circuit.
                                     zxr10L2vpnServiceType 1.3.6.1.4.1.3902.3.104.10.5.1.2 integer read-only
The type of service instance.There are several types of L2VPNs:(1)Virtual Private LAN Service(VPLS), and (2)Virtual Private Wire Service(VPWS) (3)Multi-segment Pseudowire(MSPW),and (4)Virtual Local Switching Service(VLSS),and (5)Enhanced-Virtual Private Wire Service(Enhanced-VPWS) Enumeration: 'unknown': 0, 'vpws': 2, 'mspw': 3, 'vpls': 1, 'enhanced-vpws': 6, 'vlss': 4.
                                     zxr10L2vpnServiceSac1Name 1.3.6.1.4.1.3902.3.104.10.5.1.3 displaystring read-only
The first name of Service Attachment Circuit(SAC).
                                     zxr10L2vpnServiceSac2Name 1.3.6.1.4.1.3902.3.104.10.5.1.4 displaystring read-only
The second name of Service Attachment Circuit(SAC).
                                     zxr10L2vpnServiceSdu1Name 1.3.6.1.4.1.3902.3.104.10.5.1.5 displaystring read-only
The first name of Service Distribution Unit (SDU).
                                     zxr10L2vpnServiceSdu2Name 1.3.6.1.4.1.3902.3.104.10.5.1.6 displaystring read-only
The second name of Service Distribution Unit (SDU).
                                     zxr10L2vpnServiceMTU 1.3.6.1.4.1.3902.3.104.10.5.1.7 integer32 read-only
The VPLS's MTU value.This is the Maximum Transmission Unit,excluding encapsulation overhead, of the egresspacket interface that will be transmitting the decapsulated PDUthat is received from the MPLS-enabled network. This parameter is applicable only to PWs transporting packets and is REQUIRED for these PW types.If this parameter does not match in both directions of a specific PW, that PW MUST NOT be enabled.
                                     zxr10L2vpnServiceMspwFirstPwPeer 1.3.6.1.4.1.3902.3.104.10.5.1.8 ipaddress read-only
The PW's remote endpoint address.
                                     zxr10L2vpnServiceMspwFirstPwVcid 1.3.6.1.4.1.3902.3.104.10.5.1.9 unsigned32 read-only
A non-zero 32-bit connection ID that, together with the PW type, identifies a particular PW. Note that the PW ID and the PW type MUST be the same at both endpoints.
                                     zxr10L2vpnServiceMspwFirstPWVcType 1.3.6.1.4.1.3902.3.104.10.5.1.10 l2vpnpwtype read-only
A 15-bit quantity containing a value that represents the type of PW. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (PWE3)'.
                                     zxr10L2vpnServiceMspwSecondPwPeer 1.3.6.1.4.1.3902.3.104.10.5.1.11 ipaddress read-only
The PW's remote endpoint address.
                                     zxr10L2vpnServiceMspwSecondPwVcid 1.3.6.1.4.1.3902.3.104.10.5.1.12 unsigned32 read-only
A non-zero 32-bit connection ID that, together with the PW type, identifies a particular PW. Note that the PW ID and the PW type MUST be the same at both endpoints.
                                     zxr10L2vpnServiceMspwSecondPwVcType 1.3.6.1.4.1.3902.3.104.10.5.1.13 l2vpnpwtype read-only
A 15-bit quantity containing a value that represents the type of PW. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (PWE3)'.
                             zxr10L2vpnVplsTable 1.3.6.1.4.1.3902.3.104.10.6 no-access
Vpls Table. This table contains one entry per Vpls table.
                                 zxr10L2vpnVplsEntry 1.3.6.1.4.1.3902.3.104.10.6.1 no-access
The parameter of a Vpls entity containing
                                     zxr10L2vpnVplsName 1.3.6.1.4.1.3902.3.104.10.6.1.1 displaystring read-only
The name of VPLS instance.
                                     zxr10L2vpnVplsApplication 1.3.6.1.4.1.3902.3.104.10.6.1.2 integer read-only
The type of service instance.There are several types of L2VPNs:(1)Virtual Private LAN Service(VPLS), and (2)Enhanced-Virtual Private LAN Service(Enhanced-VPLS), and (3)Enhanced-Virtual Private Wire Service(Enhanced-VPWS) Enumeration: 'unknown': 0, 'enhanced-vpws': 6, 'enhanced-vpls': 5, 'vpls': 1.
                                     zxr10L2vpnVplsModelType 1.3.6.1.4.1.3902.3.104.10.6.1.3 integer read-only
The model of the instance.It consists of (1)rfc4447model2(0) and (2)rfc4447model3(1). Enumeration: 'rfc4664model3': 1, 'rfc4664model2': 0.
                                     zxr10L2vpnVplsServiceMTU 1.3.6.1.4.1.3902.3.104.10.6.1.4 integer32 read-only
The VPLS's MTU value.This is the Maximum Transmission Unit,excluding encapsulation overhead, of the egresspacket interface that will be transmitting the decapsulated PDUthat is received from the MPLS-enabled network. This parameter is applicable only to PWs transporting packets and is REQUIRED for these PW types.If this parameter does not match in both directions of a specific PW, that PW MUST NOT be enabled.
                                     zxr10L2vpnVplsSwitchMacLearning 1.3.6.1.4.1.3902.3.104.10.6.1.5 integer read-only
L2vpn VPLS MAC learning switch. Enumeration: 'on': 1, 'off': 0.
                                     zxr10L2vpnVplsSwitchMacAging 1.3.6.1.4.1.3902.3.104.10.6.1.6 integer read-only
L2vpn VPLS MAC aging time switch. Enumeration: 'on': 1, 'off': 0.
                                     zxr10L2vpnVplsSwitchStatistics 1.3.6.1.4.1.3902.3.104.10.6.1.7 integer read-only
L2vpn VPLS MAC statistics time switch. Enumeration: 'on': 1, 'off': 0.
                                     zxr10L2vpnVplsSwitchMacWithdraw 1.3.6.1.4.1.3902.3.104.10.6.1.8 integer read-only
L2vpn VPLS MAC withdraw time switch. Enumeration: 'on': 1, 'off': 0.
                                     zxr10L2vpnVplsTimerMacAging 1.3.6.1.4.1.3902.3.104.10.6.1.9 integer32 read-only
L2vpn VPLS MAC aging timer.
                                     zxr10L2vpnVplsAntimovePolicy 1.3.6.1.4.1.3902.3.104.10.6.1.10 integer read-only
L2vpn VPLS anitmove policy. Enumeration: 'unfixed': 0, 'remote-fixed': 2, 'local-fixed': 1.
                                     zxr10L2vpnVplsL2ptPolicyLACP 1.3.6.1.4.1.3902.3.104.10.6.1.11 l2vpnvplspolicy read-only
L2vpn VPLS L2pt policy for LACP.
                                     zxr10L2vpnVplsL2ptPolicyDot1X 1.3.6.1.4.1.3902.3.104.10.6.1.12 l2vpnvplspolicy read-only
L2vpn VPLS L2pt policy for Dot1x.
                                     zxr10L2vpnVplsL2ptPolicyGARP 1.3.6.1.4.1.3902.3.104.10.6.1.13 l2vpnvplspolicy read-only
L2vpn VPLS L2pt policy for GARP.
                                     zxr10L2vpnVplsL2ptPolicySTP 1.3.6.1.4.1.3902.3.104.10.6.1.14 l2vpnvplspolicy read-only
L2vpn VPLS L2pt policy for STP.
                                     zxr10L2vpnVplsL2ptPolicyLLDP 1.3.6.1.4.1.3902.3.104.10.6.1.15 l2vpnvplspolicy read-only
L2vpn VPLS L2pt policy for LLDP.
                                     zxr10L2vpnVplsL2ptPolicyDot3X 1.3.6.1.4.1.3902.3.104.10.6.1.16 l2vpnvplspolicy read-only
L2vpn VPLS L2pt policy for Dot3X.
                                     zxr10L2vpnVplsL2ptPolicyALL 1.3.6.1.4.1.3902.3.104.10.6.1.17 l2vpnvplspolicy read-only
L2vpn VPLS L2pt policy for ALL.
                                     zxr10L2vpnVplsL2ptPolicyAllBridgeMulticast 1.3.6.1.4.1.3902.3.104.10.6.1.18 l2vpnvplspolicy read-only
L2vpn VPLS L2pt policy for AllBridgeMulticast.
                                     zxr10L2vpnVplsL2ptPolicyZDPZTP 1.3.6.1.4.1.3902.3.104.10.6.1.19 l2vpnvplspolicy read-only
L2vpn VPLS L2pt policy for ZDPZTP.
                             zxr10l2vpnGlobalPara 1.3.6.1.4.1.3902.3.104.10.10
                                   zxr10L2vpnGlobalPWCapatity 1.3.6.1.4.1.3902.3.104.10.10.1 unsigned32 read-only
The summary information about max_num of PWs'configuration.
                                   zxr10L2vpnGlobalPWUsed 1.3.6.1.4.1.3902.3.104.10.10.2 unsigned32 read-only
The summary information about current_num of PWs'configuration.
                             zxr10L2vpnEnable 1.3.6.1.4.1.3902.3.104.10.20 integer read-only
Enable L2VPN service. Enumeration: 'enable': 1, 'disable': 0.