ZTE-AN-SECURITY-INTERFACE-MIB: View SNMP OID List / Download MIB

VENDOR: ZHONGXING TELECOM CO.,LTD. (ABBR. ZTE)


 Home MIB: ZTE-AN-SECURITY-INTERFACE-MIB
Download as:   
SNMPv2-CONF, IF-MIB, ZTE-AN-IF-MIB, SNMPv2-SMI, ZTE-AN-SMI, ZTE-AN-TC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zxAnSecurityInterfaceMib 1.3.6.1.4.1.3902.1082.70.10
This MIB defines zte Access Node Security Interface managed objects.
       zxAnSecInterfaceGlobalObjects 1.3.6.1.4.1.3902.1082.70.10.1
           zxAnSecInterfaceCapabilities 1.3.6.1.4.1.3902.1082.70.10.1.1 bits read-only
The security interface capabilities of this equipment. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means supporting zxAnSecVlanRangeRateLmtTable and zxAnSecVlanRateLimitTable was deprecated. bit 1: value 1 means supporting the valid range of zxAnSecIfMaxLearnedMacs is from 0 to 1048576 or 2147483647, otherwise the valid range is from 0 to 16383 or 65535. NOTE: No recommended to display it in NMS. Bits: 'supportMaxLearnedMacsRangeTo1M': 1, 'supportVlanRateLmtBurstSize': 0.
       zxAnSecInterfaceObjects 1.3.6.1.4.1.3902.1082.70.10.2
           zxAnSecStormCtrlObjects 1.3.6.1.4.1.3902.1082.70.10.2.2
               zxAnSecStormCtrlGlobalObjects 1.3.6.1.4.1.3902.1082.70.10.2.2.1
                   zxAnSecStormCtrlBcastRateLimit 1.3.6.1.4.1.3902.1082.70.10.2.2.1.1 integer32 read-write
Broadcast packet rate limit. Value 0 means that the packet will be discarded. 0x7FFFFFFF means no limit.
                   zxAnSecStormCtrlMcastRateLimit 1.3.6.1.4.1.3902.1082.70.10.2.2.1.2 integer32 read-write
Multicast packet rate limit. Value 0 means that the packet will be discarded. 0x7FFFFFFF means no limit.
                   zxAnStormCtrlUnknownUcastRateLmt 1.3.6.1.4.1.3902.1082.70.10.2.2.1.3 integer32 read-write
Unknown unicast packet rate limit. Value 0 means that the packet will be discarded. 0x7FFFFFFF means no limit.
                   zxAnSecStormCtrlBcastBurstSize 1.3.6.1.4.1.3902.1082.70.10.2.2.1.4 integer32 read-write
Broadcast packet burst size.
               zxAnSecStormCtrlIfTable 1.3.6.1.4.1.3902.1082.70.10.2.2.3 no-access
Interface packet rate limit information table.
                   zxAnSecStormCtrlIfEntry 1.3.6.1.4.1.3902.1082.70.10.2.2.3.1 no-access
A zxAnSecStormCtrlIfTable entry.
                       zxAnSecStormCtrlIfPktType 1.3.6.1.4.1.3902.1082.70.10.2.2.3.1.1 stormctrlpkttype no-access
Storm control packet type.
                       zxAnIfStormCtrlRateLmtUnit 1.3.6.1.4.1.3902.1082.70.10.2.2.3.1.2 integer read-only
The unit of packet rate limit. Option 'kbps' has been deprecated. Enumeration: 'pps': 1, 'kbps': 2.
                       zxAnIfStormCtrlRateLmtIngress 1.3.6.1.4.1.3902.1082.70.10.2.2.3.1.3 integer32 read-write
Ingress packet rate limit. Value 0 means that the packet will be discarded. 0x7FFFFFFE means no limit. 0x7FFFFFFF means not supported.
                       zxAnIfStormCtrlRateLmtEgress 1.3.6.1.4.1.3902.1082.70.10.2.2.3.1.4 integer32 read-write
Egress packet rate limit. Value 0 means that the packet will be discarded. 0x7FFFFFFE means no limit. 0x7FFFFFFF means not supported.
               zxAnSecStormCtrlIfVlanTable 1.3.6.1.4.1.3902.1082.70.10.2.2.4 no-access
Interface VLAN storm control table.
                   zxAnSecStormCtrlIfVlanEntry 1.3.6.1.4.1.3902.1082.70.10.2.2.4.1 no-access
A zxAnSecStormCtrlIfVlanTable entry.
                       zxAnSecStormCtrlIfVid 1.3.6.1.4.1.3902.1082.70.10.2.2.4.1.1 vlanid no-access
VLAN ID.
                       zxAnSecStormCtrlIfVlanPktType 1.3.6.1.4.1.3902.1082.70.10.2.2.4.1.2 stormctrlpkttype no-access
Storm control packet type.
                       zxAnSecStormCtrlIfVlanRateLimit 1.3.6.1.4.1.3902.1082.70.10.2.2.4.1.3 integer32 read-only
Packet rate limit. Value 0 means that the packet will be discarded.
                       zxAnSecStormCtrlIfVlanBurstSize 1.3.6.1.4.1.3902.1082.70.10.2.2.4.1.4 integer32 read-only
Packet burst size.
                       zxAnSecStormCtrlIfVlanRowStatus 1.3.6.1.4.1.3902.1082.70.10.2.2.4.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnSecStormCtrlIfVlanEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
           zxAnSecProtoRateLimitObjects 1.3.6.1.4.1.3902.1082.70.10.2.3
               zxAnProtoRateLimitCapObjects 1.3.6.1.4.1.3902.1082.70.10.2.3.2
                   zxAnProtoRateLimitCapTable 1.3.6.1.4.1.3902.1082.70.10.2.3.2.2 no-access
The supported protocol rate limiting table. This table specifies which kinds of information on protocol type, rate limiting scale and unit are supported for current device.
                       zxAnProtoRateLimitCapEntry 1.3.6.1.4.1.3902.1082.70.10.2.3.2.2.1 no-access
The supported protocol rate limiting entry.
                           zxAnProtoRateLimitCapScale 1.3.6.1.4.1.3902.1082.70.10.2.3.2.2.1.1 ratelimitscale no-access
Supported Protocol Rate Limiting Scale.
                           zxAnProtoRateLimitCapType 1.3.6.1.4.1.3902.1082.70.10.2.3.2.2.1.2 ratelimitprotocoltype no-access
Supported Protocol Type.
                           zxAnProtoRateLimitCapDirection 1.3.6.1.4.1.3902.1082.70.10.2.3.2.2.1.3 integer read-only
The VLAN rate limit direction. Enumeration: 'both': 1, 'ingress': 2, 'egress': 3.
                           zxAnProtoRateLimitCapUnits 1.3.6.1.4.1.3902.1082.70.10.2.3.2.2.1.4 integer read-only
Supported unit type of rate for a specific protocol. Enumeration: 'pps': 1.
               zxAnProtoIfRateLimitTable 1.3.6.1.4.1.3902.1082.70.10.2.3.4 no-access
The global protocol rate limiting table. This table specifies protocol rate limiting configuration, which is used to reduce the maximum traffic rate for each protocol such as DHCP, IGMP, ICMP and so on.
                   zxAnProtoIfRateLimitEntry 1.3.6.1.4.1.3902.1082.70.10.2.3.4.1 no-access
The vport protocol rate limiting entry.
                       zxAnProtoIfRateLimitProtoType 1.3.6.1.4.1.3902.1082.70.10.2.3.4.1.3 ratelimitprotocoltype no-access
Supported Protocol Type.
                       zxAnProtoIfRateLimitIngress 1.3.6.1.4.1.3902.1082.70.10.2.3.4.1.4 integer32 read-write
The packet rate limit ingress value. Value 0 means that the packet will be discarded. 0x7FFFFFFE means no limit. 0x7FFFFFFF means not supported.
                       zxAnProtoIfRateLimitEgress 1.3.6.1.4.1.3902.1082.70.10.2.3.4.1.5 integer32 read-write
The packet rate egress value. Value 0 means that the packet will be discarded. 0x7FFFFFFE means no limit. 0x7FFFFFFF means not supported.
           zxAnSecMacSecurityObjects 1.3.6.1.4.1.3902.1082.70.10.2.4
               zxAnSecIfMacLearnedLimitTable 1.3.6.1.4.1.3902.1082.70.10.2.4.2 no-access
This table includes the ethernet-like interface configuration.
                   zxAnSecIfMacLearnedLimitEntry 1.3.6.1.4.1.3902.1082.70.10.2.4.2.1 no-access
An entry in zxAnSecIfSecurityConfTable.
                       zxAnSecIfMacLearnedLimitEnable 1.3.6.1.4.1.3902.1082.70.10.2.4.2.1.3 integer read-write
Enable/disable MAC learning limit. Enumeration: 'enable': 1, 'disable': 2.
                       zxAnSecIfMaxLearnedMacs 1.3.6.1.4.1.3902.1082.70.10.2.4.2.1.4 integer32 read-write
Configure the number of the MAC address learnt. One port can only learn a maximum of the MACs configured. When the value of bit 1 (supportMaxLearnedMacsRangeTo1M) of zxAnSecInterfaceCapabilities is 1, the valid range of the object is from 0 to 1048576 or 2147483647, the value 2147483647 means no limit, and the default value is 2147483647, otherwise the valid range is from 0 to 16383 or 65535, the value 65535 means no limit, and the default value is 65535.
               zxAnSecIfVlanMacLearnedTable 1.3.6.1.4.1.3902.1082.70.10.2.4.3 no-access
Interface VLAN MAC address learned limit table.
                   zxAnSecIfVlanMacLearnedEntry 1.3.6.1.4.1.3902.1082.70.10.2.4.3.1 no-access
An entry in zxAnSecIfVlanMacLearnedTable.
                       zxAnSecIfVlanMacLearnedVid 1.3.6.1.4.1.3902.1082.70.10.2.4.3.1.1 vlanid no-access
VLAN ID.
                       zxAnSecIfVlanMacLearnedMaxMacs 1.3.6.1.4.1.3902.1082.70.10.2.4.3.1.2 integer32 read-only
Configure the number of the MAC address learnt limit. Value 0 mean to disable MAC address learning.
                       zxAnSecIfVlanMacLearnedRowStatus 1.3.6.1.4.1.3902.1082.70.10.2.4.3.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnSecIfVlanMacLearnedEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
               zxAnSecIfMacBindingTable 1.3.6.1.4.1.3902.1082.70.10.2.4.4 no-access
This table includes the interface static MAC binding infomation.
                   zxAnSecIfMacBindingEntry 1.3.6.1.4.1.3902.1082.70.10.2.4.4.1 no-access
An entry in zxAnSecIfMacBindingTable.
                       zxAnSecIfMacBindingMacAddress 1.3.6.1.4.1.3902.1082.70.10.2.4.4.1.1 macaddress no-access
MAC address.
                       zxAnSecIfMacBindingRowStatus 1.3.6.1.4.1.3902.1082.70.10.2.4.4.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnSecIfMacBindingEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
               zxAnSecIfMacFilterTable 1.3.6.1.4.1.3902.1082.70.10.2.4.5 no-access
This table includes the interface static MAC filtering infomation.
                   zxAnSecIfMacFilterEntry 1.3.6.1.4.1.3902.1082.70.10.2.4.5.1 no-access
An entry in zxAnSecIfMacFilterTable.
                       zxAnSecIfMacFilterMacAddress 1.3.6.1.4.1.3902.1082.70.10.2.4.5.1.1 macaddress no-access
MAC address.
                       zxAnSecIfMacFilterRowStatus 1.3.6.1.4.1.3902.1082.70.10.2.4.5.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnSecIfMacFilterEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
           zxAnSecIpv6FilterObjects 1.3.6.1.4.1.3902.1082.70.10.2.5
               zxAnSecIpv6FilterGlobalObjects 1.3.6.1.4.1.3902.1082.70.10.2.5.1
                   zxAnSecIpv6FiltVlanConfNextId 1.3.6.1.4.1.3902.1082.70.10.2.5.1.1 integer32 read-only
This object contains an unused value for zxAnSecIpv6FilterVlanConfId in the zxAnSecIpv6FilterVlanConfTable. The value 0 indicates that no unassigned entries are available.
               zxAnSecIpv6FilterVlanConfTable 1.3.6.1.4.1.3902.1082.70.10.2.5.2 no-access
This table includes the IPv6 filter information.
                   zxAnSecIpv6FilterVlanConfEntry 1.3.6.1.4.1.3902.1082.70.10.2.5.2.1 no-access
An entry in zxAnSecIpv6FilterVlanConfTable.
                       zxAnSecIpv6FilterVlanConfId 1.3.6.1.4.1.3902.1082.70.10.2.5.2.1.1 integer32 no-access
IPv6 filter record ID.
                       zxAnSecIpv6FilterVid 1.3.6.1.4.1.3902.1082.70.10.2.5.2.1.2 vlanid read-only
VLAN ID.
                       zxAnSecIpv6FilterVlanMask 1.3.6.1.4.1.3902.1082.70.10.2.5.2.1.3 integer32 read-only
The wildcard mask for the zxAnSecIpv6FilterVid bits that must match. 1 bits in the mask indicate the corresponding bits in the zxAnSecIpv6FilterVid must match in order for the matching to be successful, and 0 bits are don't care bits in the matching. A value of zero causes only packets of source address the same as zxAnSecIpv6FilterVid to match.
                       zxAnSecIpv6FilterVlanRowStatus 1.3.6.1.4.1.3902.1082.70.10.2.5.2.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnSecIpv6FilterVlanConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
           zxAnSecVlanRateLimitObjects 1.3.6.1.4.1.3902.1082.70.10.2.6
               zxAnSecVlanRateLimitTable 1.3.6.1.4.1.3902.1082.70.10.2.6.2 no-access
VLAN rate limit table.
                   zxAnSecVlanRateLimitEntry 1.3.6.1.4.1.3902.1082.70.10.2.6.2.1 no-access
A zxAnSecVlanRateLimitTable entry.
                       zxAnSecVlanRateLimitVid 1.3.6.1.4.1.3902.1082.70.10.2.6.2.1.1 vlanid no-access
VLAN ID.
                       zxAnSecVlanRateLimitDirection 1.3.6.1.4.1.3902.1082.70.10.2.6.2.1.2 ratelimitdirection no-access
VLAN rate limit direction.
                       zxAnSecVlanRateLimit 1.3.6.1.4.1.3902.1082.70.10.2.6.2.1.3 integer32 read-only
VLAN rate limit, granularity is 64kbps.
                       zxAnSecVlanRateLimitRowStatus 1.3.6.1.4.1.3902.1082.70.10.2.6.2.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnSecVlanRateLimitEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
               zxAnSecVlanRangeRateLmtTable 1.3.6.1.4.1.3902.1082.70.10.2.6.3 no-access
VLAN range rate limit table.
                   zxAnSecVlanRangeRateLmtEntry 1.3.6.1.4.1.3902.1082.70.10.2.6.3.1 no-access
A zxAnSecVlanRangeRateLmtTable entry.
                       zxAnSecVlanRangeRateLmtConfId 1.3.6.1.4.1.3902.1082.70.10.2.6.3.1.1 integer32 no-access
VLAN rate limit record ID.
                       zxAnSecVlanRangeRateLmtDirection 1.3.6.1.4.1.3902.1082.70.10.2.6.3.1.2 integer read-only
VLAN rate limit direction. Enumeration: 'ingress': 1, 'egress': 2.
                       zxAnSecVlanRangeRateLmt 1.3.6.1.4.1.3902.1082.70.10.2.6.3.1.3 integer32 read-only
VLAN rate limit, with a granularity of 64 kbps.
                       zxAnSecVlanRangeRateLmtBurstSize 1.3.6.1.4.1.3902.1082.70.10.2.6.3.1.4 integer32 read-only
VLAN rate limit burst size.
                       zxAnSecVlanRangeRateLmtVlanIds 1.3.6.1.4.1.3902.1082.70.10.2.6.3.1.5 displaystring read-only
The VLAN range for rate limiting. Each VLAN ID ranges from 1 to 4094. For multiple discrete VLAN IDs, separate them by commas. For multiple continuous VLAN IDs, configure them by '-' character. E.g., 100,200-1000,2000.
                       zxAnSecVlanRangeRateLmtRowStatus 1.3.6.1.4.1.3902.1082.70.10.2.6.3.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnSecVlanRateLimitEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
       zxAnSecInterfaceConformance 1.3.6.1.4.1.3902.1082.70.10.4
           zxAnSecInterfaceCompliances 1.3.6.1.4.1.3902.1082.70.10.4.1
               zxAnSecInterfaceCompliance 1.3.6.1.4.1.3902.1082.70.10.4.1.1
The compliance statement for the ZTE-AN-SECURITY-INTERFACE-MIB.
           zxAnSecInterfaceGroups 1.3.6.1.4.1.3902.1082.70.10.4.2
               zxAnSecStormCtrlIfGroup 1.3.6.1.4.1.3902.1082.70.10.4.2.1
A collection of objects providing the interface storm control configuration information.
               zxAnProtoRateLimitCapGroup 1.3.6.1.4.1.3902.1082.70.10.4.2.2
A collection of objects providing the interface rate protocal limit capability control configuration information.
               zxAnProtoIfRateLimitGroup 1.3.6.1.4.1.3902.1082.70.10.4.2.3
A collection of objects providing the interface protocol rate limit control configuration information.
               zxAnSecIfMacLearnedLimitGroup 1.3.6.1.4.1.3902.1082.70.10.4.2.4
A collection of objects providing the interface max mac learn control configuration information.