ZTE-AN-SECURITY-CPUDEFEND-MIB: View SNMP OID List / Download MIB
VENDOR: ZHONGXING TELECOM CO.,LTD. (ABBR. ZTE)
Home | MIB: ZTE-AN-SECURITY-CPUDEFEND-MIB | |||
---|---|---|---|---|
Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
Object Name | OID | Type | Access | Info |
zxAnSecurityCpuDefendMib | 1.3.6.1.4.1.3902.1082.70.25 |
New oid assignments for ACL Objects. |
||
zxAnSecCpuDefendGlobalObjects | 1.3.6.1.4.1.3902.1082.70.25.1 | |||
zxAnSecCpuCapabilities | 1.3.6.1.4.1.3902.1082.70.25.1.100 | bits | read-only |
The management capabilities of CPU defend. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means zxAnSecCpuQueuePktLmtMaxRate supports no limit. NOTE: No recommended to display it in NMS. Bits: 'supportQueuePktMaxRateUnlimit': 0. |
zxAnSecCpuDefendObjects | 1.3.6.1.4.1.3902.1082.70.25.2 | |||
zxAnSecCpuPktLimitObjects | 1.3.6.1.4.1.3902.1082.70.25.2.2 | |||
zxAnSecCpuPktLimitGlobalObjects | 1.3.6.1.4.1.3902.1082.70.25.2.2.1 | |||
zxAnSecCpuPktRateLimitAll | 1.3.6.1.4.1.3902.1082.70.25.2.2.1.1 | integer32 | read-write |
The rate limit of all packets that can be sent to CPU. Value 0 means unlimit. only C3XX support,C6XX not support anymore. |
zxAnSecCpuPktLimitStatsResetAll | 1.3.6.1.4.1.3902.1082.70.25.2.2.1.2 | integer | read-write |
Reset all CPU packet limit statistics manually when it is set to '1'. When get this variable, always return 1. Enumeration: 'reset': 1. |
zxAnSecCpuPktLimitConfTable | 1.3.6.1.4.1.3902.1082.70.25.2.2.2 | no-access |
CPU packet limit configuration table. |
|
1.3.6.1.4.1.3902.1082.70.25.2.2.2.1 | no-access |
An entry of zxAnSecCpuPktLimitConfTable. |
||
zxAnSecCpuPktLimitConfProtoType | 1.3.6.1.4.1.3902.1082.70.25.2.2.2.1.1 | zxanpacketlimitprototype | no-access |
Protocol type. |
zxAnSecCpuPktLimitConfPktLmtEn | 1.3.6.1.4.1.3902.1082.70.25.2.2.2.1.2 | integer | read-write |
Enable/disable the packet rate limit. only C3XX support,C6XX not support anymore. Enumeration: 'disabled': 2, 'enabled': 1. |
zxAnSecCpuPktLimitConfRateLimit | 1.3.6.1.4.1.3902.1082.70.25.2.2.2.1.3 | integer32 | read-write |
The packet rate limit. |
zxAnSecCpuPktLimitStatsTable | 1.3.6.1.4.1.3902.1082.70.25.2.2.3 | no-access |
CPU packet limit statistic table. |
|
1.3.6.1.4.1.3902.1082.70.25.2.2.3.1 | no-access |
An entry of zxAnSecCpuPktLimitStatsTable. |
||
zxAnSecCpuPktLimitType | 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.1 | integer | no-access |
CPU packet limit view type. Enumeration: 'slot': 3, 'outband': 2, 'inband': 1. |
zxAnSecCpuPktLimitRack | 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.2 | integer32 | no-access |
Rack No.. When zxAnSecCpuPktLimitType is inband(1) or outband(2), this object should be 0. When zxAnSecCpuPktLimitType is slot(3), this object indicates the rack No.. |
zxAnSecCpuPktLimitShelf | 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.3 | integer32 | no-access |
Shelf No.. When zxAnSecCpuPktLimitType is inband(1) or outband(2), this object should be 0. When zxAnSecCpuPktLimitType is slot(3), this object indicates the shelf No.. |
zxAnSecCpuPktLimitSlot | 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.4 | integer32 | no-access |
Slot No.. When zxAnSecCpuPktLimitType is inband(1) or outband(2), this object should be 0. When zxAnSecCpuPktLimitType is slot(3), this object indicates the slot No.. |
zxAnSecCpuPktLimitProtoType | 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.5 | zxanpacketlimitprototype | no-access |
Protocol type. |
zxAnSecCpuPktLimitTotalPkts | 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.6 | counter32 | read-only |
Total packets. |
zxAnSecCpuPktLimitDiscards | 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.7 | counter32 | read-only |
Discarded packets. |
zxAnSecCpuPktLimitPktRate | 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.8 | gauge32 | read-only |
Packet rate. |
zxAnSecCpuPktLimitPeakRate | 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.9 | gauge32 | read-only |
Packet peak rate. |
zxAnSecCpuPktLimitPeakTime | 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.10 | dateandtime | read-only |
The time of zxAnSecCpuPktLimitPeakRate happened. |
zxAnSecCpuPktLimitDiscardSeconds | 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.11 | counter32 | read-only |
Discarding packet seconds. |
zxAnSecCpuQueuePktLimitObjects | 1.3.6.1.4.1.3902.1082.70.25.2.3 | |||
zxAnSecCpuQueuePktLmtGlbObjects | 1.3.6.1.4.1.3902.1082.70.25.2.3.1 | |||
zxAnSecCpuQueuePktStatsResetAll | 1.3.6.1.4.1.3902.1082.70.25.2.3.1.1 | integer | read-write |
Reset all CPU queue packet statistics manually when it is set to '1'. When get this variable, always return 1. Enumeration: 'reset': 1. |
zxAnSecCpuQueuePktLmtConfTable | 1.3.6.1.4.1.3902.1082.70.25.2.3.2 | no-access |
CPU queue packet limit configuration table. |
|
1.3.6.1.4.1.3902.1082.70.25.2.3.2.1 | no-access |
An entry of zxAnSecCpuQueuePktLmtConfTable. |
||
zxAnSecCpuQueuePktLmtQueueId | 1.3.6.1.4.1.3902.1082.70.25.2.3.2.1.1 | integer32 | no-access |
CPU queue ID. |
zxAnSecCpuQueuePktLmtMaxRate | 1.3.6.1.4.1.3902.1082.70.25.2.3.2.1.2 | integer32 | read-write |
Maximum packet rate. The value 2147483647(0x7FFFFFFF) means no limit. Only queue 0 and queue 7 can be configured no limit. |
zxAnSecCpuQueuePktLmtStatsTable | 1.3.6.1.4.1.3902.1082.70.25.2.3.3 | no-access |
CPU queue packet limit configuration table. |
|
1.3.6.1.4.1.3902.1082.70.25.2.3.3.1 | no-access |
An entry of zxAnSecCpuQueuePktLmtStatsTable. |
||
zxAnSecCpuQueuePktLmtCurrRate | 1.3.6.1.4.1.3902.1082.70.25.2.3.3.1.1 | integer32 | read-only |
The current packet rate. |
zxAnSecCpuQueuePktLmtPeakRate | 1.3.6.1.4.1.3902.1082.70.25.2.3.3.1.2 | integer32 | read-only |
The peak packet rate. |
zxAnSecCpuQueuePktLmtPeakTime | 1.3.6.1.4.1.3902.1082.70.25.2.3.3.1.3 | dateandtime | read-only |
The time when the peak packet rate happened. |
zxAnSecCpuAclObjects | 1.3.6.1.4.1.3902.1082.70.25.2.4 | |||
zxAnSecCpuAclGlobalObjects | 1.3.6.1.4.1.3902.1082.70.25.2.4.1 | |||
zxAnSecCpuAclTcpPkts | 1.3.6.1.4.1.3902.1082.70.25.2.4.1.1 | counter32 | read-only |
Total number of TCP packets. |
zxAnSecCpuAclUnmatchRuleTcpPkts | 1.3.6.1.4.1.3902.1082.70.25.2.4.1.2 | counter32 | read-only |
The number of TCP packets with unmactching ACL rules. |
zxAnSecCpuAclConfTable | 1.3.6.1.4.1.3902.1082.70.25.2.4.2 | no-access |
A table used to create or remove ACL. Filtering TCP packets based on matching relationship between ACL numbers and ACL rules. It is only supported by C600 serial. |
|
1.3.6.1.4.1.3902.1082.70.25.2.4.2.1 | no-access |
A list of entries of zxAnSecCpuAclConfTable. |
||
zxAnSecCpuAclNumber | 1.3.6.1.4.1.3902.1082.70.25.2.4.2.1.1 | integer32 | no-access |
ACL number. |
zxAnSecCpuAclRowStatus | 1.3.6.1.4.1.3902.1082.70.25.2.4.2.1.50 | rowstatus | read-only |
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnExampleFunc1Xxx1Entry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). |
zxAnSecCpuAclTcpPktStatsTable | 1.3.6.1.4.1.3902.1082.70.25.2.4.3 | no-access |
TCP packet statistic table. |
|
1.3.6.1.4.1.3902.1082.70.25.2.4.3.1 | no-access |
A list of entries of zxAnSecCpuAclTcpPktStatsTable. |
||
zxAnSecCpuAclRuleId | 1.3.6.1.4.1.3902.1082.70.25.2.4.3.1.1 | integer32 | no-access |
ACL rule id. |
zxAnSecCpuAclPermitTcpPkts | 1.3.6.1.4.1.3902.1082.70.25.2.4.3.1.2 | counter32 | read-only |
The number of permitted TCP packets. |
zxAnSecCpuAclDenyTcpPkts | 1.3.6.1.4.1.3902.1082.70.25.2.4.3.1.3 | counter32 | read-only |
The number of denied TCP packets. |
zxAnSecCpuAclIsnErrorDropTcpPkts | 1.3.6.1.4.1.3902.1082.70.25.2.4.3.1.4 | counter32 | read-only |
The number of dropped TCP packets with ISN error. |
zxAnSecCpuAclUnmatchDropTcpPkts | 1.3.6.1.4.1.3902.1082.70.25.2.4.3.1.5 | counter32 | read-only |
The number of dropped TCP packets with unmatching any ACL rules. |
zxAnSecCpuAclTcpConnStatusTable | 1.3.6.1.4.1.3902.1082.70.25.2.4.4 | no-access |
TCP connection status table. |
|
1.3.6.1.4.1.3902.1082.70.25.2.4.4.1 | no-access |
A list of entries of zxAnSecCpuAclTcpConnStatusTable. |
||
zxAnSecCpuAclTcpConnSessionId | 1.3.6.1.4.1.3902.1082.70.25.2.4.4.1.1 | integer32 | no-access |
The session ID of of the TCP connection. |
zxAnSecCpuAclTcpConnSrcIpType | 1.3.6.1.4.1.3902.1082.70.25.2.4.4.1.2 | inetaddresstype | read-only |
Source IP address type of the TCP connection. |
zxAnSecCpuAclTcpConnSrcIp | 1.3.6.1.4.1.3902.1082.70.25.2.4.4.1.3 | inetaddress | read-only |
Source IP address of the TCP connection. |
zxAnSecCpuAclTcpConnSrcPort | 1.3.6.1.4.1.3902.1082.70.25.2.4.4.1.4 | integer32 | read-only |
Source port number of the TCP connection. |
zxAnSecCpuAclTcpConnDestIpType | 1.3.6.1.4.1.3902.1082.70.25.2.4.4.1.5 | inetaddresstype | read-only |
Destination IP address type of the TCP connection. |
zxAnSecCpuAclTcpConnDestIp | 1.3.6.1.4.1.3902.1082.70.25.2.4.4.1.6 | inetaddress | read-only |
Destination IP address of the TCP connection. |
zxAnSecCpuAclTcpConnDestPort | 1.3.6.1.4.1.3902.1082.70.25.2.4.4.1.7 | integer32 | read-only |
Destination port number of the TCP connection. |
zxAnSecCpuAclTcpConnStatus | 1.3.6.1.4.1.3902.1082.70.25.2.4.4.1.8 | integer | read-only |
Status of the TCP connection. Enumeration: 'established': 1, 'notEstablished': 2. |