ZTE-AN-QOS-MIB: View SNMP OID List / Download MIB

VENDOR: ZHONGXING TELECOM CO.,LTD. (ABBR. ZTE)


 Home MIB: ZTE-AN-QOS-MIB
Download as:   
SNMPv2-CONF, IF-MIB, ZTE-AN-IF-MIB, SNMPv2-SMI, ZTE-AN-SMI, ZTE-AN-TC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zxAnQosMib 1.3.6.1.4.1.3902.1082.50.1
This MIB defines ZTE Access Node QoS managed objects.
     zxAnQosGlobalObjects 1.3.6.1.4.1.3902.1082.50.1.1
         zxAnQosCapabilities 1.3.6.1.4.1.3902.1082.50.1.1.100 bits read-only
The QoS capabilities. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means supporting zxAnQosPvcToQueue in zxAnQosQueueMapPrfTable. bit 1: value 1 means supporting PON channel interface in zxAnQosIfQueueStatsTable. bit 2: value 1 means supporting zxAnQosQueueConfBufferSize in zxAnQosQueueConfPrfTable. NOTE: No recommended to display it in NMS. Bits: 'supportPonChIfInQueueStatsTable': 1, 'supportQueueConfBufferSize': 2, 'supportPvcToQueue': 0.
     zxAnQosObjects 1.3.6.1.4.1.3902.1082.50.1.2
         zxAnQosMapObjects 1.3.6.1.4.1.3902.1082.50.1.2.1
             zxAnQosMapGlobalObjects 1.3.6.1.4.1.3902.1082.50.1.2.1.1
                 zxAnQosGlobalCosToDropPrecedence 1.3.6.1.4.1.3902.1082.50.1.2.1.1.1 octet string read-write
The global CoS mapping drop precedence value. For example, '00 01 02 00 01 02 01 02' means CoS 0 is mapping to drop precedence 0, CoS 1 is mapping to drop precedence 1, ..., CoS 7 is mapping to drop precedence 2. The range of drop precedence is 0-2. The value 'ff ff ff ff ff ff ff ff' means the drop precedence is not configured.
             zxAnQosCosToCosPrfTable 1.3.6.1.4.1.3902.1082.50.1.2.1.2 no-access
This table contains CosToCos mapping information. One entry in this table reflects a profile defined which can be used to configure an interface.
                 zxAnQosCosToCosPrfEntry 1.3.6.1.4.1.3902.1082.50.1.2.1.2.1 no-access
zxAnQosCosToCosPrfTable entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, the mandatory and optional variables are as follows: mandatory: zxAnQosCosToCos, zxAnQosCosToCosPrfRowStatus. optional : none. To delete an entry, only zxAnQosCosToCosPrfRowStatus is needed in one SNMP setOperation. After an entry is created, only variable zxAnQosCosToCos can be modified. If a manager tries to modify any other variables in this entry, agent will return error with SNMP error code inconsistentValue.
                     zxAnQosCosToCosPrfName 1.3.6.1.4.1.3902.1082.50.1.2.1.2.1.1 displaystring no-access
The profile name is a display string. It is an index of this table.
                     zxAnQosCosToCos 1.3.6.1.4.1.3902.1082.50.1.2.1.2.1.2 octet string read-only
The values for CoS remarking. For example, the value '00 01 02 03 04 05 06 07' means CoS 0 is remarked to CoS 0,..., CoS 7 is remarked to CoS 7. The range of CoS is 0-7.
                     zxAnQosCosToCosPrfRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.1.2.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosCosToCosPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
             zxAnQosDscpToDscpPrfTable 1.3.6.1.4.1.3902.1082.50.1.2.1.3 no-access
This table contains DSCP remark information. One entry in this table reflects a profile defined which can be used to configure an interface.
                 zxAnQosDscpToDscpPrfEntry 1.3.6.1.4.1.3902.1082.50.1.2.1.3.1 no-access
zxAnQosDscpToDscpPrfTable entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, the mandatory and optional variables are as follows: mandatory: zxAnQosDscpToDscp, zxAnQosDscpToDscpPrfRowStatus. optional: none. To delete an entry, only zxAnQosDscpToDscpPrfRowStatus is needed in one SNMP set operation. After an entry is created, only variable zxAnQosDscpToDscp can be modified. If a manager tries to modify any other variables in this entry, agent will return error with SNMP error code inconsistentValue.
                     zxAnQosDscpToDscpPrfName 1.3.6.1.4.1.3902.1082.50.1.2.1.3.1.1 displaystring no-access
The profile name is a display string. It is an index of this table.
                     zxAnQosDscpToDscp 1.3.6.1.4.1.3902.1082.50.1.2.1.3.1.2 octet string read-only
The values for DSCP priority remarking. For example, the value '00 01 ...3F' means DSCP priority 0 is remarked to DSCP priority 0,...,DSCP priority 63 is remarked to DSCP priority 63. The range of DSCP priority is 0-63.
                     zxAnQosDscpToDscpPrfRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.1.3.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosDscpToDscpPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
             zxAnQosDscpToCosPrfTable 1.3.6.1.4.1.3902.1082.50.1.2.1.4 no-access
This table contains DSCP to CoS mapping information. One entry in this table reflects a profile defined which can be used to configure an interface.
                 zxAnQosDscpToCosPrfEntry 1.3.6.1.4.1.3902.1082.50.1.2.1.4.1 no-access
zxAnQosDscpToCosPrfTable entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, the mandatory and optional variables are as follows: mandatory: zxAnQosDscpToCos, zxAnQosDscpToCosPrfRowStatus. optional: none. To delete an entry, only zxAnQosDscpToCosPrfRowStatus is needed in one SNMP set operation. After an entry is created, only variable zxAnQosDscpToCos can be modified. If a manager tries to modify any other variables in this entry, agent will return error with SNMP error code inconsistentValue.
                     zxAnQosDscpToCosPrfName 1.3.6.1.4.1.3902.1082.50.1.2.1.4.1.1 displaystring no-access
The profile name is a display string. It is an index of this table.
                     zxAnQosDscpToCos 1.3.6.1.4.1.3902.1082.50.1.2.1.4.1.2 octet string read-only
The DSCP mapping CoS. For example, the value '00 01...07' means DSCP priority 0 is mapping to CoS 0,...,DSCP priority 63 is mapping to CoS 7. The range of CoS is 0-7.
                     zxAnQosDscpToCosPrfRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.1.4.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosDscpToCosPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
             zxAnQosMplsTcToCosPrfTable 1.3.6.1.4.1.3902.1082.50.1.2.1.6 no-access
This table contains MPLS TC value to CoS mapping information. One entry in this table reflects a profile defined which can be used to configure an interface.
                 zxAnQosMplsTcToCosPrfEntry 1.3.6.1.4.1.3902.1082.50.1.2.1.6.1 no-access
zxAnQosMplsTcToCosPrfTable entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, the mandatory and optional variables are as follows: mandatory: zxAnQosMplsTcToCos, zxAnQosMplsTcToCosPrfRowStatus. optional: none. To delete an entry, only zxAnQosMplsTcToCosPrfRowStatus is needed in one SNMP set operation. After an entry is created, only variable zxAnQosMplsTcToCos can be modified. If a manager tries to modify any other variables in this entry, agent will return error with SNMP error code inconsistentValue.
                     zxAnQosMplsTcToCosPrfName 1.3.6.1.4.1.3902.1082.50.1.2.1.6.1.1 displaystring no-access
The profile name is a display string. It is an index of this table.
                     zxAnQosMplsTcToCos 1.3.6.1.4.1.3902.1082.50.1.2.1.6.1.2 octet string read-only
The MPLS TC mapping to CoS. For example, '00 01 02 03 04 05 06 07' means TC 0 is mapping to CoS 0, ..., TC 7 is mapping to CoS 7. The range of MPLS TC value and CoS are 0-7.
                     zxAnQosMplsTcToCosPrfRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.1.6.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosMplsTcToCosPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
             zxAnQosCosToMplsTcPrfTable 1.3.6.1.4.1.3902.1082.50.1.2.1.7 no-access
This table contains CoS to MPLS TC mapping information. One entry in this table reflects a profile defined which can be used to configure an interface.
                 zxAnQosCosToMplsTcPrfEntry 1.3.6.1.4.1.3902.1082.50.1.2.1.7.1 no-access
zxAnQosCosToMplsTcPrfTable entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, the mandatory and optional variables are as follows: mandatory: zxAnQosCosToMplsTc, zxAnQosCosToMplsTcPrfRowStatus. optional: none. To delete an entry, only zxAnQosCosToMplsTcPrfRowStatus is needed in one SNMP set operation. After an entry is created, only variable zxAnQosCosToMplsTc can be modified. If a manager tries to modify any other variables in this entry, agent will return error with SNMP error code inconsistentValue.
                     zxAnQosCosToMplsTcPrfName 1.3.6.1.4.1.3902.1082.50.1.2.1.7.1.1 displaystring no-access
The profile name is a display string. It is an index of this table.
                     zxAnQosCosToMplsTc 1.3.6.1.4.1.3902.1082.50.1.2.1.7.1.2 octet string read-only
The CoS mapping MPLS TC value. For example, '00 01 02 03 04 05 06 07' means CoS 0 is mapping to TC value 0,..., CoS 7 is mapping to TC value 7. The range of CoS and TC value are 0-7.
                     zxAnQosCosToMplsTcPrfRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.1.7.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosCosToMplsTcPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
             zxAnQosCosToDeiPrfTable 1.3.6.1.4.1.3902.1082.50.1.2.1.9 no-access
This table contains CoS to DEI (Drop Eligible Indicator) mapping information. One entry in this table reflects a profile defined which can be used to configure an interface.
                 zxAnQosCosToDeiPrfEntry 1.3.6.1.4.1.3902.1082.50.1.2.1.9.1 no-access
zxAnQosCosToDeiPrfTable entry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To create an entry, the mandatory and optional variables are as follows: mandatory: zxAnQosCosToDeiMappingType, zxAnQosCosToDei, zxAnQosCosToDeiRowStatus. optional: none. To delete an entry, only zxAnQosCosToDeiRowStatus is needed in one SNMP set operation. After an entry is created, variable zxAnQosCosToDeiMappingType, zxAnQosCosToDei can be modified. If a manager tries to modify any other variables in this entry, agent will return error with SNMP error code inconsistentValue.
                     zxAnQosCosToDeiPrfName 1.3.6.1.4.1.3902.1082.50.1.2.1.9.1.1 displaystring no-access
The profile name is a display string. It is an index of this table.
                     zxAnQosCosToDeiMappingType 1.3.6.1.4.1.3902.1082.50.1.2.1.9.1.2 integer read-only
ccosToSdei(1) -- mapping C-Tag CoS to S-DEI. ccosToCdei(2) -- mapping C-Tag CoS to C-DEI. scosToSdei(3) -- mapping S-Tag CoS to S-DEI. Enumeration: 'ccosToSdei': 1, 'scosToSdei': 3, 'ccosToCdei': 2.
                     zxAnQosCosToDei 1.3.6.1.4.1.3902.1082.50.1.2.1.9.1.3 octet string read-only
The CoS mapping to DEI value. For example, '00 01 02 00 01 02 01 02' means CoS 0 is mapping to DEI 0, CoS 1 is mapping to DEI 1, ..., CoS 7 is mapping to DEI 2. The range of DEI is 0-2. '0' -- green packet. '1' -- yellow packet. '2' -- discarded.
                     zxAnQosCosToDeiRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.1.9.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosCosToDeiPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
         zxAnQosQueueObjects 1.3.6.1.4.1.3902.1082.50.1.2.2
             zxAnQosQueueGlobalObjects 1.3.6.1.4.1.3902.1082.50.1.2.2.1
                 zxAnQosGlobalMaxQueues 1.3.6.1.4.1.3902.1082.50.1.2.2.1.3 integer read-write
The global maximum queues. Enumeration: 'four': 1, 'eight': 2.
                 zxAnQosGlobalCosToQueue 1.3.6.1.4.1.3902.1082.50.1.2.2.1.4 octet string read-write
The queues of CoS. For example, the value '01 01 02 03 04 06 06 07' means that the queue of CoS 5 is 6, ..., the queue of CoS 7 is 7. The range of each queue is 0 to 7. The number of queues is fixed to zxAnQosGlobalMaxQueues.
                 zxAnQosGlobalQueueWeight 1.3.6.1.4.1.3902.1082.50.1.2.2.1.5 octet string read-write
The weight of queues. For example, the value '01 02 04 06 02 02 02 02' means that the weight of queue0 is 1, ..., the weight of queue7 is 2. The range of each weight is 0 to 100. The number of queues is fixed to zxAnQosGlobalMaxQueues.
                 zxAnQosGlobalQueueMode 1.3.6.1.4.1.3902.1082.50.1.2.2.1.6 integer read-write
The global queue mode configuration. pon(1) - The queue configuration is effective on PON interfaces. vportNormal(2) - The queue configuration is effective on VPort, the priority of unicast or multicast green packets is higher than yellow packets. Only four queues is supported. vportCir(3) - The queue configuration is effective on VPort, the priority of unicast green packets is higher than multicast packets, the priority of multicast packets is higher than yellow packets. vportPir(4) - The queue configuration is effective on VPort, the priority of unicast or multicast green packets is higher than yellow packets. Only eight queues is supported. vportNormalBidirectional(5) - The queue configuration supports egress or ingress direction based on vportNormal. Enumeration: 'pon': 1, 'vportPir': 4, 'vportCir': 3, 'vportNormalBidirectional': 5, 'vportNormal': 2.
                 zxAnQosGlobalQueueToQueue 1.3.6.1.4.1.3902.1082.50.1.2.2.1.7 octet string read-write
The mapping of queue to queue. For example, the value '00 02 03 05' means that queue0 is mapping queue0, queue2 is mapping queue1, queue3 is mapping queue2, queue5 is mapping queue3. The range of each queue is 0 to 7. The number of queues is fixed to 4.
                 zxAnQosGlbQStatShortInterval 1.3.6.1.4.1.3902.1082.50.1.2.2.1.8 integer32 read-write
The short interval of queue statistics.
                 zxAnQosGlbQStatLongInterval 1.3.6.1.4.1.3902.1082.50.1.2.2.1.9 integer32 read-write
The long interval of queue statistics.
             zxAnQosQueueConfPrfTable 1.3.6.1.4.1.3902.1082.50.1.2.2.7 no-access
QoS queue configuration profile table.
                 zxAnQosQueueConfPrfEntry 1.3.6.1.4.1.3902.1082.50.1.2.2.7.1 no-access
QoS queue configuration profile entry.
                     zxAnQosQueueConfPrfName 1.3.6.1.4.1.3902.1082.50.1.2.2.7.1.1 displaystring no-access
QoS queue configuration profile name.
                     zxAnQosQueueConfDepthRatio 1.3.6.1.4.1.3902.1082.50.1.2.2.7.1.2 octet string read-only
QoS queue depth ratio. For example, the value '01 02 04 06 02 02 02 50' means depth ratio of queue0 is 1, ..., depth ratio of queue7 is 80. The range of depth ratio is 1 to 100. The number of queues is fixed to zxAnQosGlobalMaxQueues.
                     zxAnQosQueueConfBufferSize 1.3.6.1.4.1.3902.1082.50.1.2.2.7.1.3 integer32 read-only
QoS queue buffer size.
                     zxAnQosQueueConfPrfRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.2.7.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosQueueConfPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
             zxAnQosQueueWredConfTable 1.3.6.1.4.1.3902.1082.50.1.2.2.30 no-access
WRED configuration table.
                   zxAnQosQueueWredConfEntry 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1 no-access
WRED configuration entry.
                       zxAnQosQWredConfQueueNo 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.1 integer32 no-access
The No. of the queue.
                       zxAnQosQWredConfYellowLThresh 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.2 integer32 read-only
The lower WRED threshold parameter of a threshold number for the yellow packet when WRED dropping algorithm is used.
                       zxAnQosQWredConfYellowHThresh 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.3 integer32 read-only
The higher WRED threshold parameter of a threshold number for the yellow packets when WRED dropping algorithm is used.
                       zxAnQosQWredConfYellowMaxProb 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.4 integer32 read-only
Maximum dropping probability of yellow packet.
                       zxAnQosQWredConfGreenLThresh 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.5 integer32 read-only
The lower WRED threshold parameter of a threshold number for the green packet when WRED dropping algorithm is used.
                       zxAnQosQWredConfGreenHThresh 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.6 integer32 read-only
The higher WRED threshold parameter of a threshold number for the green packet when WRED dropping algorithm is used.
                       zxAnQosQWredConfGreenMaxProb 1.3.6.1.4.1.3902.1082.50.1.2.2.30.1.7 integer32 read-only
Maximum dropping probability of green packet.
         zxAnQosIfObjects 1.3.6.1.4.1.3902.1082.50.1.2.3
             zxAnQosIfConfTable 1.3.6.1.4.1.3902.1082.50.1.2.3.2 no-access
This table contains configuration data for interface, include ethernet interface, GPON OLT and ONU interface.
                 zxAnQosIfConfEntry 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1 no-access
An entry in zxAnQosIfConfTable. This table contains QoS configuration parameters for physical interface (include ethernet interface and GPON OLT interface) and GPON ONU interface. For ethernet interface, parameters can be configured include zxAnQosIfRateLimit, zxAnQosIfBucketSize, zxAnQosIfTrustMode, zxAnQosIfDefaultCos, zxAnQosIfDscpToDscpPrf, zxAnQosIfDscpToCosPrf, zxAnQosIfDscpToDropPrecedencePrf and zxAnQosIfQueueBlockPrf. Variables zxAnQosIfRateLimit and zxAnQosIfBucketSize must be configured bindingly. Notice that elements of zxAnQosQueueDepth in the configuring zxAnQosIfQueueBlockPrf should between 5 and 14, or all zreos. For ethernet interface of C600 series, parameters can be configured include zxAnQosIfTrustMode, zxAnQosIfDefaultCos, zxAnQosIfCosToCosPrf, zxAnQosIfDscpToDscpPrf, zxAnQosIfDscpToCosPrf, zxAnQosIfCosOverride, zxAnQosIfEgressCosToCosPrf, zxAnQosIfEgressDscpToCosPrf, and zxAnQosIfQueueConfPrf. For PTP interface, besides the parameters that can be configured to ethernet interface, three more parameters can be configured include zxAnQosIfIngressRateLimit, zxAnQosIfIngressBucketSize and zxAnQosIfQueueMapPrf. Variables zxAnQosIfIngressRateLimit and zxAnQosIfIngressBucketSize must be configured bindingly. Notice that zxAnQosIfQueueMapPrf configured to this interface, its zxAnQosQueueMapMode can only be set to cos or serviceType. For GPON OLT interface, parameters can be configured include zxAnQosIfQueueBlockPrf and zxAnQosIfQueueMapPrf. Notice that zxAnQosIfQueueMapPrf configured to this interface, its zxAnQosQueueMapMode can only be set to cos or serviceType. For GPON ONU interface, parameters can be configured include zxAnQosIfTrustMode, zxAnQosIfCosFilter, zxAnQosIfDefaultCos, zxAnQosIfEgressDefaultCos, zxAnQosIfCosToCosPrf, zxAnQosIfDscpToCosPrf, zxAnQosIfCosOverride, zxAnQosIfEgressCosOverride, zxAnQosIfQueueBlockPrf, zxAnQosIfQueueMapPrf, zxAnQosIfEgressCosToCosPrf and zxAnQosIfEgressDscpToCosPrf. For GPON ONU interface of C600 series, parameters can be configured include zxAnQosIfTrustMode, zxAnQosIfDefaultCos, zxAnQosIfCosToCosPrf, zxAnQosIfDscpToDscpPrf, zxAnQosIfDscpToCosPrf, zxAnQosIfCosOverride, zxAnQosIfEgressCosToCosPrf, zxAnQosIfEgressDscpToCosPrf, and zxAnQosIfQueueConfPrf.
                     zxAnQosIfTrustMode 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.3 integer read-write
Trust cos or trust dscp. Not support for gpon olt interface. Enumeration: 'cos': 1, 'notSupport': 255, 'dscp': 2.
                     zxAnQosIfDefaultCos 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.5 integer32 read-write
Default CoS, 255 means not support. This object is valid only when zxAnQosIfTrustMode is set to CoS.
                     zxAnQosIfCosToCosPrf 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.7 displaystring read-write
CoS to CoS mapping profile name. An empty string means unsupported. Valid for gpon onu interface.
                     zxAnQosIfDscpToDscpPrf 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.8 displaystring read-write
DSCP remarking profile name. This object is valid only when zxAnQosIfTrustMode is set to dscp. An empty string means unsupported.
                     zxAnQosIfDscpToCosPrf 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.9 displaystring read-write
DSCP to CoS mapping profile name. This object is valid only when zxAnQosIfTrustMode is set to dscp. An empty string means unsupported.
                     zxAnQosIfCosOverride 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.12 integer read-write
Enable or disable CoS Override. Enumeration: 'enable': 1, 'notSupport': 255, 'disable': 2.
                     zxAnQosIfEgressCosOverride 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.14 integer read-write
Enable or disable Egress CoS Override. Enumeration: 'enable': 1, 'notSupport': 255, 'disable': 2.
                     zxAnQosIfEgressCosToCosPrf 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.17 displaystring read-write
Egress CoS to CoS mapping profile name. An empty string means unsupported.
                     zxAnQosIfEgressDscpToCosPrf 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.18 displaystring read-write
Egress DSCP to CoS mapping profile name. An empty string means unsupported.
                     zxAnQosIfQueueWredPrf 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.23 displaystring read-write
Queue WRED profile name. An empty string means unsupported.
                     zxAnQosIfQueueConfPrf 1.3.6.1.4.1.3902.1082.50.1.2.3.2.1.26 displaystring read-write
Queue configuration profile name. An empty string means unsupported.
         zxAnQosIfStatsObjects 1.3.6.1.4.1.3902.1082.50.1.2.4
             zxAnQosIfQueueStatsTable 1.3.6.1.4.1.3902.1082.50.1.2.4.1 no-access
Interfaces queue statistics table.
                 zxAnQosIfQueueStatsEntry 1.3.6.1.4.1.3902.1082.50.1.2.4.1.1 no-access
An entry in zxAnQosIfQueueStatsTable. This table contains queue statistics for GPON OLT interfaces and P2P interfaces. It includes zxAnQosIfQueueStatsPassPkts, zxAnQosIfQueueStatsDiscardPkts and zxAnQosIfQueueStatsReset.
                     zxAnQosIfQueueStatsQueueId 1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.1 integer32 no-access
Queue ID.
                     zxAnQosIfQueueStatsForwardPkts 1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.2 counter64 read-only
Forwarding packets. Value 0x7fffffffffffffff means not supported.
                     zxAnQosIfQueueStatsDiscardPkts 1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.3 counter64 read-only
Discarded packets. Value 0x7fffffffffffffff means not supported.
                     zxAnQosIfQueueDiscardGreenPkts 1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.4 counter64 read-only
Discarded green packets. Value 0x7fffffffffffffff means not supported.
                     zxAnQosIfQueueDiscardYellowPkts 1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.5 counter64 read-only
Discarded yellow packets. Value 0x7fffffffffffffff means not supported.
                     zxAnQosIfQueueStatsReset 1.3.6.1.4.1.3902.1082.50.1.2.4.1.1.50 integer read-write
Set the number of packets to zero. When getting this variable, this object always returns 1. Enumeration: 'reset': 1.
             zxAnQosBrgIfQueueStatsTable 1.3.6.1.4.1.3902.1082.50.1.2.4.2 no-access
A table containing queue statistics information.
                 zxAnQosBrgIfQueueStatsEntry 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1 no-access
An entry in zxAnQosBrgIfQueueStatsTable. This table contains queue statistics for bridge interfaces.
                     zxAnQosBrgIfQStatsQueueId 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.1 integer32 no-access
Queue ID.
                     zxAnQosBrgIfQStatsForwardPkts 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.2 counter64 read-only
Forwarding packets. Value 0x7fffffffffffffff means not supported.
                     zxAnQosBrgIfQStatsDiscardPkts 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.3 counter64 read-only
Discarded packets. Value 0x7fffffffffffffff means not supported.
                     zxAnQosBrgIfQDiscardGreenPkts 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.4 counter64 read-only
Discarded green packets. Value 0x7fffffffffffffff means not supported.
                     zxAnQosBrgIfQDiscardYellowPkts 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.5 counter64 read-only
Discarded yellow packets. Value 0x7fffffffffffffff means not supported.
                     zxAnQosBrgIfQStatsReset 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.49 integer read-only
Set the number of packets to zero. When getting this variable, this object always returns 1. Enumeration: 'reset': 1.
                     zxAnQosBrgIfQStatsRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.4.2.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosBrgIfQueueStatsEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
             zxAnQosIfQDiscardPktThreshTable 1.3.6.1.4.1.3902.1082.50.1.2.4.3 no-access
A table containing discarded packet threshold information.
                 zxAnQosIfQDiscardPktThreshEntry 1.3.6.1.4.1.3902.1082.50.1.2.4.3.1 no-access
An entry in zxAnQosIfQDiscardPktThreshTable. This table contains discarded packet threshold for queue statistics.
                     zxAnQosIfQDiscardPktThrQueueId 1.3.6.1.4.1.3902.1082.50.1.2.4.3.1.1 integer32 no-access
Queue ID.
                     zxAnQosIfQShortDiscardPktThresh 1.3.6.1.4.1.3902.1082.50.1.2.4.3.1.2 integer32 read-only
Short interval discarded packet threshold.
                     zxAnQosIfQLongDiscardPktThresh 1.3.6.1.4.1.3902.1082.50.1.2.4.3.1.3 integer32 read-only
Long interval discarded packet threshold.
                     zxAnQosIfQDiscardPktThrRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.4.3.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosIfQDiscardPktThreshEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
         zxAnQosVlanObjects 1.3.6.1.4.1.3902.1082.50.1.2.5
             zxAnQosVlanCosToDeiPrfConfTable 1.3.6.1.4.1.3902.1082.50.1.2.5.2 no-access
A table containing VLAN CoS to DEI (Drop Eligible Indicator) profile information.
                 zxAnQosVlanCosToDeiPrfConfEntry 1.3.6.1.4.1.3902.1082.50.1.2.5.2.1 no-access
Entry for zxAnQosVlanCosToDeiPrfConfTable.
                     zxAnQosVlanCosToDeiPrfConfVid 1.3.6.1.4.1.3902.1082.50.1.2.5.2.1.1 vlanid no-access
VLAN ID.
                     zxAnQosVlanCosToDeiPrfConfName 1.3.6.1.4.1.3902.1082.50.1.2.5.2.1.2 displaystring read-only
CoS to DEI profile name.
                     zxAnQosVlanCosToDeiPrfRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.5.2.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in ZxAnVlanCosToDeiPrfConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns 1.
             zxAnQosVlanEgressDeiTable 1.3.6.1.4.1.3902.1082.50.1.2.5.3 no-access
A table containing VLAN egress DEI information.
                 zxAnQosVlanEgressDeiEntry 1.3.6.1.4.1.3902.1082.50.1.2.5.3.1 no-access
Entry for zxAnQosVlanEgressDeiTable.
                     zxAnQosVlanEgressDeiVid 1.3.6.1.4.1.3902.1082.50.1.2.5.3.1.1 vlanid no-access
VLAN ID.
                     zxAnQosVlanEgressDeiRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.5.3.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosVlanEgressDeiEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns 1.
             zxAnQosVlanCosToCosPrfConfTable 1.3.6.1.4.1.3902.1082.50.1.2.5.4 no-access
A table containing VLAN CoS remarking information.
                 zxAnQosVlanCosToCosPrfConfEntry 1.3.6.1.4.1.3902.1082.50.1.2.5.4.1 no-access
Entry for zxAnQosVlanCosToCosPrfConfTable.
                     zxAnQosVlanCosToCosPrfConfSVid 1.3.6.1.4.1.3902.1082.50.1.2.5.4.1.1 vlanid no-access
SVLAN ID.
                     zxAnQosVlanCosToCosPrfConfCVid 1.3.6.1.4.1.3902.1082.50.1.2.5.4.1.2 integer32 no-access
CVLAN ID.
                     zxAnQosVlanCosToCosPrfConfMode 1.3.6.1.4.1.3902.1082.50.1.2.5.4.1.3 integer no-access
CoS remarking mode. Enumeration: 'userSide': 2, 'networkSide': 1.
                     zxAnQosVlanCosToCosPrfConfName 1.3.6.1.4.1.3902.1082.50.1.2.5.4.1.4 displaystring read-only
CoS to CoS profile name.
                     zxAnQosVlanCosToCosPrfRowStatus 1.3.6.1.4.1.3902.1082.50.1.2.5.4.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnQosVlanCosToCosPrfConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns 1.
     zxAnQosConformance 1.3.6.1.4.1.3902.1082.50.1.4
         zxAnQosCompliances 1.3.6.1.4.1.3902.1082.50.1.4.1
             zxAnQosCompliance 1.3.6.1.4.1.3902.1082.50.1.4.1.1
The compliance statement for entities which implement the ZTE-AN-QOS-MIB.
         zxAnQosGroups 1.3.6.1.4.1.3902.1082.50.1.4.2
             zxAnQosCosToCosPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.1
A collection of objects creating, modifying or deleting a CosToCosPrf.
             zxAnQosDscpToDscpPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.2
A collection of objects creating, modifying or deleting a DscpToDscpPrf.
             zxAnQosDscpToCosPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.3
A collection of objects creating, modifying or deleting a DscpToCosPrf.
             zxAnQosDscpToDropPrecedePrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.4
A collection of objects creating, modifying or deleting a DscpToDropPrf.
             zxAnQosMplsTcToCosPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.5
A collection of objects creating, modifying or deleting a MplsTcToCosPrf.
             zxAnQosCosToMplsTcPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.6
A collection of objects creating, modifying or deleting a CosToMplsTcPrf.
             zxAnQosEthCosToQueueGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.7
A collection of objects configuring cos-to-queue mapping for ethernet interface.
             zxAnQosQueueBlockPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.8
A collection of objects creating, modifying or deleting a QueueBlockPrf.
             zxAnQosQueueMapPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.9
A collection of objects creating, modifying or deleting a QueueMapPrf.
             zxAnQosIfTrafficShapeGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.10
A collection of objects configuring traffic-shaping for ethernet interface.
             zxAnQosIfTrustModeGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.11
A collection of objects configuring trust-mode for ethernet interface or gpon onu interface. For ethernet interface, when trust dscp, packets received will be modified according to the configured dscp-to-dscp-profile, dscp-to-cos-profile and dscp-to-drop-precedence-profile.
             zxAnQosIfDefaultCosGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.13
A collection of objects configuring default-cos value for ethernet interface. For ethernet interface, default-cos value is tagged for receiving untag packets.
             zxAnQosIfCosToCosPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.15
A collection of objects configuring cos-to-cos-profile for gpon onu interface. When trust cos, cos-to-cos-profile configured is valid.
             zxAnQosIfDscpToDscpPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.16
A collection of objects configuring dscp-to-dscp-profile for ethernet interface. When trust dscp, dscp-to-dscp-profile configured is valid.
             zxAnQosIfDscpToCosPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.17
A collection of objects configuring dscp-to-cos-profile for ethernet interface and gpon onu interface. When trust dscp, dscp-to-cos-profile configured is valid.
             zxAnQosIfDscpToDropPrePrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.18
A collection of objects configuring dscp-to-drop-profile for ethernet interface. When trust dscp, dscp-to-drop-profile configured is valid.
             zxAnQosIfEgressCosToCosPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.23
A collection of objects configuring cos-to-cos-profile for gpon onu interface. When trust cos, cos-to-cos-profile configured is valid.
             zxAnQosIfEgressDscpToCosPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.24
A collection of objects configuring dscp-to-cos-profile for gpon onu interface. When trust dscp, dscp-to-cos-profile configured is valid.
             zxAnQosIfQueueBlockPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.25
A queue-block profile configuring on ethernet interface, gpon olt interface.
             zxAnQosIfQueueMapPrfGroup 1.3.6.1.4.1.3902.1082.50.1.4.2.26
A queue-map profile configuring on gpon olt interface.