ZTE-AN-OTDR-MIB: View SNMP OID List / Download MIB

VENDOR: ZHONGXING TELECOM CO.,LTD. (ABBR. ZTE)


 Home MIB: ZTE-AN-OTDR-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zxAnOtdrMib 1.3.6.1.4.1.3902.1083.5
The MIB module for the management of OTDR equipment.
     zxAnOtdrGlobalObjects 1.3.6.1.4.1.3902.1083.5.1
         zxAnOtdrCapacityGlobalObjects 1.3.6.1.4.1.3902.1083.5.1.1
             zxAnOtdrWaveLengthList 1.3.6.1.4.1.3902.1083.5.1.1.1 displaystring read-only
The wave length supported by OTDR. The value divided by '|'. The unit of wave length is nm. PON OLTs support 1625. eOMUs support 1550|1625.
             zxAnOtdrTestPulseWidthList 1.3.6.1.4.1.3902.1083.5.1.1.2 displaystring read-only
The pulse width supported by OTDR. The value divided by '|'. The unit of pulse width is ns. The value 200001 means 2.5ns. e.g., 5|10|30|100|200|500|10000|20000|200001.
             zxAnOtdrTotalPorts 1.3.6.1.4.1.3902.1083.5.1.1.3 integer32 read-only
The total port number of OTDR.
             zxAnOtdrTestSeqCodeLenList 1.3.6.1.4.1.3902.1083.5.1.1.4 displaystring read-only
The sequence code length supported by OTDR. The value divided by '|'. PON OLTs support 512|1024|2048|4096. eOMUs support 64|256|512|1024.
             zxAnOtdrTestSeqCodeWidthList 1.3.6.1.4.1.3902.1083.5.1.1.5 displaystring read-only
The sequence code width supported by OTDR. The value divided by '|'. The unit of pulse width is ns. PON OLTs support 5|10|20|30|50. eOMUs support 5|10|20|30.
             zxAnOtdrDualWavelengthTestMode 1.3.6.1.4.1.3902.1083.5.1.1.6 integer read-only
The test mode of dual wavelength. cascade(1): dual wavelength testing on two NEs by cascade. nonCascade(2): dual wavelength testing on one NE. Enumeration: 'cascade': 1, 'nonCascade': 2.
             zxAnOtdrCapabilities 1.3.6.1.4.1.3902.1083.5.1.1.51 bits read-only
The OTDR capabilities of this equipment. The bit value 1 means the function represented by this bit is supported by this equipment. - fastHealthPrfDiff(0): value 1 means supporting zxAnOtdrIfHealthTestParamPrf and zxAnOtdrTestType. - seqCodeLen(1): value 1 means supporting zxAnOtdrTestParamPrfSeqCodeLen. - routineTaskTestMode(2): value 1 means supporting zxAnOtdrRoutineTaskTestMode. - priorityTaskTest(3): value 1 means supporting zxAnOtdrFastTestPriority and zxAnOtdrFastTestRequestSource. - reflectorTest(4): value 1 means supporting zxAnOtdrIfReflectorTestParamPrf and zxAnOtdrTestType. - globalTestParamPrf(5): value 1 means supporting global test parameter profile. - opticalFiberLabefaction(6): value 1 means supporting optical fiber labefaction predication. - bothwayTest(7): value 1 means supporting zxAnOtdrIfBothwayTestParamPrf and zxAnOtdrTestType. - controlCardIndependentTest(8): value 1 means supporting the control card test without line card. Bits: 'bothwayTest': 7, 'controlCardIndependentTest': 8, 'seqCodeLen': 1, 'priorityTaskTest': 3, 'globalTestParamPrf': 5, 'fastHealthPrfDiff': 0, 'opticalFiberLabefaction': 6, 'reflectorTest': 4, 'routineTaskTestMode': 2.
         zxAnOtdrEnvGlobalObjects 1.3.6.1.4.1.3902.1083.5.1.2
             zxAnOtdrEnvCtrlCardGlobalObjects 1.3.6.1.4.1.3902.1083.5.1.2.1
                 zxAnOtdrCtrlCardCurrentTemp 1.3.6.1.4.1.3902.1083.5.1.2.1.1 integer32 read-only
The current control card temperature of OTDR equipment.
                 zxAnOtdrCtrlCardTempHighThresh 1.3.6.1.4.1.3902.1083.5.1.2.1.2 integer32 read-write
The high threshold of the control card temperature, the zxAnOtdrEnvCtrlCardHighTempAlm trap should be generated when zxAnOtdrCtrlCardCurrentTemp is higher than it. Otherwise, zxAnOtdrEnvCtrlCardHighTempClr trap should be generated when zxAnOtdrCtrlCardCurrentTemp is lower than it.
                 zxAnOtdrCtrlCardTempLowThresh 1.3.6.1.4.1.3902.1083.5.1.2.1.3 integer32 read-write
The low threshold of the control card temperature, the zxAnOtdrEnvCtrlCardLowTempAlm trap should be generated when zxAnOtdrCtrlCardCurrentTemp is lower than it. Otherwise, zxAnOtdrEnvCtrlCardLowTempClr trap should be generated when zxAnOtdrCtrlCardCurrentTemp is higher than it.
             zxAnOtdrEnvFanGlobalObjects 1.3.6.1.4.1.3902.1083.5.1.2.2
                 zxAnOtdrEnvFanStatus 1.3.6.1.4.1.3902.1083.5.1.2.2.1 integer read-only
The fan status. When zxAnOtdrEnvFanStatus is abnormal, zxAnOtdrEnvFanFailureAlm trap should be sent to manager. If zxAnOtdrEnvFanStatus is normal, zxAnOtdrEnvFanFailureClr trap should be sent. Enumeration: 'abnormal': 2, 'normal': 1.
                 zxAnOtdrEnvFanOperStatus 1.3.6.1.4.1.3902.1083.5.1.2.2.2 integer read-only
The operational status of fan. Enumeration: 'down': 2, 'up': 1.
             zxAnOtdrEnvApdGlobalObjects 1.3.6.1.4.1.3902.1083.5.1.2.3
                 zxAnOtdrEnvApdCurrentTemp 1.3.6.1.4.1.3902.1083.5.1.2.3.1 integer32 read-only
The current temperature of APD.
                 zxAnOtdrEnvApdTempHighThresh 1.3.6.1.4.1.3902.1083.5.1.2.3.2 integer32 read-write
The high threshold of the APD temperature, the zxAnOtdrEnvApdHighTempAlm trap should be generated when zxAnOtdrEnvApdCurrentTemp is higher than it. Otherwise, zxAnOtdrEnvApdHighTempClr trap should be generated when zxAnOtdrEnvApdCurrentTemp is lower than it.
                 zxAnOtdrEnvApdTempLowThresh 1.3.6.1.4.1.3902.1083.5.1.2.3.3 integer32 read-write
The low threshold of the APD temperature, the zxAnOtdrEnvApdLowTempAlm trap should be generated when zxAnOtdrEnvApdCurrentTemp is lower than it. Otherwise, zxAnOtdrEnvApdLowTempClr trap should be generated when zxAnOtdrEnvApdCurrentTemp higher than it.
         zxAnOtdrPortUtilGlobalObjects 1.3.6.1.4.1.3902.1083.5.1.3
             zxAnOtdrPortUtilization 1.3.6.1.4.1.3902.1083.5.1.3.1 integer32 read-only
The current port utilization of OTDR equipment.
             zxAnOtdrPortUtilizationThresh 1.3.6.1.4.1.3902.1083.5.1.3.2 integer32 read-write
The threshold of zxAnOtdrPortUtilization. When zxAnOtdrPortUtilization exceeds this threshold, the zxAnOtdrPortUtlExceedAlm trap should be generated.
     zxAnOtdrObjects 1.3.6.1.4.1.3902.1083.5.2
         zxAnOtdrIfObjects 1.3.6.1.4.1.3902.1083.5.2.1
             zxAnOtdrIfGlobalObjects 1.3.6.1.4.1.3902.1083.5.2.1.1
                 zxAnOtdrGlobalTestParamPrf 1.3.6.1.4.1.3902.1083.5.2.1.1.1 displaystring read-write
The OTDR global test parameter profile name list. The global profile is applied to the interface when the interface test parameter profile is unconfigured.
                 zxAnOtdrGlobalNetworkPropertyPrf 1.3.6.1.4.1.3902.1083.5.2.1.1.2 displaystring read-write
The OTDR global network property profile name list. The global profile is applied to the interface when the interface network property profile is unconfigured.
                 zxAnOtdrGlobalAcceptanceTestPrf 1.3.6.1.4.1.3902.1083.5.2.1.1.3 displaystring read-write
The OTDR acceptance test parameter profile name list, such as 'DEFAULT_ACCEPTANCE_1,DEFAULT_ACCEPTANCE_2,DEFAULT_ACCEPTANCE_3', which are in order of decreasing priority. The global profile is applied to the interface when zxAnOtdrIfAcceptanceTestPrf is unconfigured.
             zxAnOtdrTestParamPrfTable 1.3.6.1.4.1.3902.1083.5.2.1.2 no-access
This table includes OTDR test parameter Profile information.
                 zxAnOtdrTestParamPrfEntry 1.3.6.1.4.1.3902.1083.5.2.1.2.1 no-access
OTDR test parameter profile entry.
                     zxAnOtdrTestParamPrfName 1.3.6.1.4.1.3902.1083.5.2.1.2.1.1 displaystring no-access
OTDR test parameter profile name.
                     zxAnOtdrTestParamPrfMode 1.3.6.1.4.1.3902.1083.5.2.1.2.1.2 integer read-only
OTDR test mode. When the mode is pulseMethod, zxAnOtdrTestParamPrfWaveLength, zxAnOtdrTestParamPrfDistance, zxAnOtdrTestParamPrfFiberIor, zxAnOtdrTestParamPrfPulseWidth, zxAnOtdrTestParamPrfDuration are valid. When the mode is sequenceMethod, zxAnOtdrTestParamPrfWaveLength, zxAnOtdrTestParamPrfDistance, zxAnOtdrTestParamPrfFiberIor, zxAnOtdrTestParamPrfDuration, zxAnOtdrTestParamPrfSeqCodeLen, zxAnOtdrTestParamPrfSeqCodeWidth are valid. Enumeration: 'sequenceMethod': 2, 'pulseMethod': 1.
                     zxAnOtdrTestParamPrfWaveLength 1.3.6.1.4.1.3902.1083.5.2.1.2.1.3 integer32 read-only
OTDR test wave length.
                     zxAnOtdrTestParamPrfDistance 1.3.6.1.4.1.3902.1083.5.2.1.2.1.4 integer32 read-only
OTDR test distance.
                     zxAnOtdrTestParamPrfFiberIor 1.3.6.1.4.1.3902.1083.5.2.1.2.1.5 integer32 read-only
OTDR test fiber IOR. The range is from 1.4*(10^6) to 1.6*(10^6).
                     zxAnOtdrTestParamPrfPulseWidth 1.3.6.1.4.1.3902.1083.5.2.1.2.1.6 integer32 read-only
OTDR test pulse width. '0' means not configured. A value less than 200000 is mapped to an integer pulse width value. A value greater than 200000 is mapped to a specific pulse width value. e.g., The value 5 is mapped to 5ns, the value 200001 is mapped to 2.5ns.
                     zxAnOtdrTestParamPrfDuration 1.3.6.1.4.1.3902.1083.5.2.1.2.1.7 integer32 read-only
OTDR test duration. '0' means not configured
                     zxAnOtdrTestParamPrfSeqCodeLen 1.3.6.1.4.1.3902.1083.5.2.1.2.1.8 integer32 read-only
OTDR test sequence code length. The valid value is the power of two, For example:16,32,64. '0' means not configured.
                     zxAnOtdrTestParamPrfSeqCodeWidth 1.3.6.1.4.1.3902.1083.5.2.1.2.1.9 integer32 read-only
OTDR test sequence code width. '0' means not configured.
                     zxAnOtdrTestParamPrfRowStatus 1.3.6.1.4.1.3902.1083.5.2.1.2.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrTestParamPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
             zxAnOtdrIfTable 1.3.6.1.4.1.3902.1083.5.2.1.3 no-access
This table includes OTDR test interface information.
                 zxAnOtdrIfEntry 1.3.6.1.4.1.3902.1083.5.2.1.3.1 no-access
OTDR interface entry.
                     zxAnOtdrIfAlias 1.3.6.1.4.1.3902.1083.5.2.1.3.1.5 displaystring read-write
OTDR interface alias.
                     zxAnOtdrIfFastTestParamPrf 1.3.6.1.4.1.3902.1083.5.2.1.3.1.6 displaystring read-write
OTDR fast test parameter profile name list, such as 'DEFAULT_PULSE,DEFAULT_SEQUENCE'. Empty string means unconfigured.
                     zxAnOtdrIfRoutineTestParamPrf 1.3.6.1.4.1.3902.1083.5.2.1.3.1.7 displaystring read-write
OTDR routine test parameter profile name list, such as 'DEFAULT_PULSE,DEFAULT_SEQUENCE'. Empty string means unconfigured.
                     zxAnOtdrIfHealthTestParamPrf 1.3.6.1.4.1.3902.1083.5.2.1.3.1.8 displaystring read-write
OTDR health test parameter profile name list, such as 'DEFAULT_PULSE,DEFAULT_SEQUENCE'. Empty string means unconfigured.
                     zxAnOtdrIfReflectorTestParamPrf 1.3.6.1.4.1.3902.1083.5.2.1.3.1.9 displaystring read-write
OTDR reflector test parameter profile name list, such as 'DEFAULT_REFLECTOR'.
                     zxAnOtdrIfNetworkPropertyPrf 1.3.6.1.4.1.3902.1083.5.2.1.3.1.10 displaystring read-write
OTDR interface network property profile name list. Empty string means unconfigured.
                     zxAnOtdrIfAcceptanceTestPrf 1.3.6.1.4.1.3902.1083.5.2.1.3.1.11 displaystring read-write
OTDR acceptance test parameter profile name list, such as 'DEFAULT_PULSE,DEFAULT_SEQUENCE,DEFAULT_ACCEPTANCE', which are in order of decreasing priority. Empty string means unconfigured.
                     zxAnOtdrIfNetworkProperty 1.3.6.1.4.1.3902.1083.5.2.1.3.1.17 integer read-write
The network property of OTDR interface. p2mp(1): the network of point to multi-points. p2p(2): the network of point to point. Enumeration: 'p2mp': 1, 'p2p': 2.
                     zxAnOtdrIfWorkingStatus 1.3.6.1.4.1.3902.1083.5.2.1.3.1.18 integer read-only
The working status of OTDR interface. Enumeration: 'idle': 2, 'testing': 1.
                     zxAnOtdrIfUsageStatus 1.3.6.1.4.1.3902.1083.5.2.1.3.1.19 integer read-only
The usage status of OTDR interface. used(1): Health test has been run successfully. unused(2): No test parameter profile is bound to the port and the health test never runs. preconfigured(3): Test parameter profile is bound to the port. reserved(4): The port is reserved by administrator. Test parameter profile cannot be bound to a reserved port and the health test cannot run on it. Enumeration: 'unused': 2, 'used': 1, 'reserved': 4, 'preconfigured': 3.
                     zxAnOtdrIfUsageStatusSwitch 1.3.6.1.4.1.3902.1083.5.2.1.3.1.20 integer read-write
The usage status switch of OTDR interface. An unused status can be switched to reserved, and reserved status can be switched to unused. When get this variable, always return 1. Enumeration: 'switchToReserved': 2, 'switchToUnused': 1.
                     zxAnOtdrIfWorkMode 1.3.6.1.4.1.3902.1083.5.2.1.3.1.21 integer read-only
The working mode of OTDR interface. When the mode is faultLocating, the interface can be used for fault locating. When the mode is nodeMonitoring, the interface can be used for node monitoring. When the mode is opticalPowerMonitoring,the interface can be used for optical power monitoring. When the mode is lineDetection, the interface can be used for line detection. When the mode is bothwayTest, the interface can be used for bothway test. Bothway test uses two NEs linked by one fiber. When the mode is unusable, the interface can not be use. Enumeration: 'bothwayTest': 5, 'faultLocating': 1, 'unusable': 255, 'nodeMonitoring': 2, 'lineDetection': 4, 'opticalPowerMonitoring': 3.
                     zxAnOtdrIfBothwayTestPrf 1.3.6.1.4.1.3902.1083.5.2.1.3.1.22 displaystring read-write
OTDR bothway test parameter profile name list, such as 'DEFAULT_P2P'. Empty string means unconfigured.
             zxAnOtdrNetPropPrfTable 1.3.6.1.4.1.3902.1083.5.2.1.4 no-access
OTDR network property profile table.
                 zxAnOtdrNetPropPrfEntry 1.3.6.1.4.1.3902.1083.5.2.1.4.1 no-access
OTDR network property profile entry.
                     zxAnOtdrNetPrfName 1.3.6.1.4.1.3902.1083.5.2.1.4.1.1 displaystring no-access
OTDR network property profile name.
                     zxAnOtdrNetPrfLinkType 1.3.6.1.4.1.3902.1083.5.2.1.4.1.2 integer read-only
OTDR link type. p2mp(1): the network of point to multi-points. p2p(2): the network of point to point. Enumeration: 'p2mp': 1, 'p2p': 2.
                     zxAnOtdrNetPrfFirstSplitRatio 1.3.6.1.4.1.3902.1083.5.2.1.4.1.3 integer read-only
OTDR first-level splitting ratio. ratio1-x(20) : first-level splitting ratio is unknown. none(255) : first-level splitting does not exist. Enumeration: 'ratio1-8': 3, 'none': 255, 'ratio1-128': 7, 'ratio1-x': 20, 'ratio1-64': 6, 'ratio1-2': 1, 'ratio1-4': 2, 'ratio1-32': 5, 'ratio1-16': 4.
                     zxAnOtdrNetPrfSecondSplitRatio 1.3.6.1.4.1.3902.1083.5.2.1.4.1.4 integer read-only
OTDR second-level splitting ratio. ratio1-x(20) : second-level splitting ratio is unknown. none(255) : second-level splitting does not exist. Enumeration: 'ratio1-8': 3, 'none': 255, 'ratio1-128': 7, 'ratio1-x': 20, 'ratio1-64': 6, 'ratio1-2': 1, 'ratio1-4': 2, 'ratio1-32': 5, 'ratio1-16': 4.
                     zxAnOtdrNetPrfThirdSplitRatio 1.3.6.1.4.1.3902.1083.5.2.1.4.1.5 integer read-only
OTDR third-level splitting ratio. ratio1-x(20) : third-level splitting ratio is unknown. none(255) : third-level splitting does not exist. Enumeration: 'ratio1-8': 3, 'none': 255, 'ratio1-128': 7, 'ratio1-x': 20, 'ratio1-64': 6, 'ratio1-2': 1, 'ratio1-4': 2, 'ratio1-32': 5, 'ratio1-16': 4.
                     zxAnOtdrNetPrfLinkLength 1.3.6.1.4.1.3902.1083.5.2.1.4.1.6 integer32 read-only
OTDR link length. Value 0 means unconfigured.
                     zxAnOtdrNetPrfRowStatus 1.3.6.1.4.1.3902.1083.5.2.1.4.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrTestParamPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
         zxAnOtdrFastTestObjects 1.3.6.1.4.1.3902.1083.5.2.2
             zxAnOtdrFastTestConfObjects 1.3.6.1.4.1.3902.1083.5.2.2.1
                 zxAnOtdrFastTestActionObjects 1.3.6.1.4.1.3902.1083.5.2.2.1.1
                     zxAnOtdrFastTestSn 1.3.6.1.4.1.3902.1083.5.2.2.1.1.1 displaystring read-write
OTDR fast test serial number.
                     zxAnOtdrFastTestAction 1.3.6.1.4.1.3902.1083.5.2.2.1.1.2 integer read-write
OTDR fast test action. Enumeration: 'start': 1, 'unlock': 5, 'stop': 2, 'complete': 3, 'lock': 4.
                     zxAnOtdrFastTestMode 1.3.6.1.4.1.3902.1083.5.2.2.1.1.3 integer read-write
OTDR fast test mode. When the mode is pulseMethod, zxAnOtdrFastTestWaveLength, zxAnOtdrFastTestDistance, zxAnOtdrFastTestFiberIor, zxAnOtdrFastTestPulseWidth, zxAnOtdrFastTestDuration are valid. When the mode is sequenceMethod, zxAnOtdrFastTestWaveLength, zxAnOtdrFastTestDistance, zxAnOtdrFastTestFiberIor, zxAnOtdrFastTestDuration, zxAnOtdrFastTestSeqCodeLen, zxAnOtdrFastTestSeqCodeWidth are valid. Enumeration: 'sequenceMethod': 2, 'pulseMethod': 1.
                     zxAnOtdrFastTestWaveLength 1.3.6.1.4.1.3902.1083.5.2.2.1.1.4 integer32 read-write
OTDR fast test wave length.
                     zxAnOtdrFastTestDistance 1.3.6.1.4.1.3902.1083.5.2.2.1.1.5 integer32 read-write
OTDR fast test distance.
                     zxAnOtdrFastTestFiberIor 1.3.6.1.4.1.3902.1083.5.2.2.1.1.6 integer32 read-write
OTDR fast test fiber IOR. The range is from 1.4*(10^6) to 1.6*(10^6).
                     zxAnOtdrFastTestPulseWidth 1.3.6.1.4.1.3902.1083.5.2.2.1.1.7 integer32 read-write
OTDR fast test pulse width. A value less than 200000 is mapped to an integer pulse width value. A value greater than 200000 is mapped to a specific pulse width value. e.g., 5 is mapped to 5ns, 200001 is mapped to 2.5ns.
                     zxAnOtdrFastTestDuration 1.3.6.1.4.1.3902.1083.5.2.2.1.1.8 integer32 read-write
OTDR fast test duration.
                     zxAnOtdrFastTestSeqCodeLen 1.3.6.1.4.1.3902.1083.5.2.2.1.1.9 integer32 read-write
OTDR fast test sequence code length. The valid value is the power of two, For example:16,32,64.
                     zxAnOtdrFastTestSeqCodeWidth 1.3.6.1.4.1.3902.1083.5.2.2.1.1.10 integer32 read-write
OTDR fast test sequence code width.
                     zxAnOtdrTestType 1.3.6.1.4.1.3902.1083.5.2.2.1.1.11 integer read-write
OTDR test type. Enumeration: 'lineDetectionFast': 10, 'alarmTrigger': 5, 'lineDetectionHealth': 9, 'acceptance': 7, 'adHoc': 3, 'health': 2, 'fast': 1, 'adaptive': 6, 'labefaction': 8, 'bothway': 11, 'reflector': 4.
                     zxAnOtdrFastTestPriority 1.3.6.1.4.1.3902.1083.5.2.2.1.1.12 integer32 read-write
OTDR fast test priority.
                     zxAnOtdrFastTestRequestSource 1.3.6.1.4.1.3902.1083.5.2.2.1.1.13 integer read-write
OTDR fast test request source. Enumeration: 'tl1': 2, 'app': 3, 'ems': 1.
                     zxAnOtdrFastTestRequestSrcIpType 1.3.6.1.4.1.3902.1083.5.2.2.1.1.14 inetaddresstype read-write
IP address type of the OTDR fast test request source.
                     zxAnOtdrFastTestRequestSrcIp 1.3.6.1.4.1.3902.1083.5.2.2.1.1.15 inetaddress read-write
IP address of the OTDR fast test request source.
                     zxAnOtdrMonNodeTestType 1.3.6.1.4.1.3902.1083.5.2.2.1.1.16 integer read-write
OTDR monitoring node test type. Enumeration: 'closeTest': 2, 'openTest': 1.
                 zxAnOtdrFastTestIfTable 1.3.6.1.4.1.3902.1083.5.2.2.1.2 no-access
OTDR fast test interface table.
                     zxAnOtdrFastTestIfEntry 1.3.6.1.4.1.3902.1083.5.2.2.1.2.1 no-access
OTDR fast test interface entry. The OTDR fast test consists of two steps, creating fast test ports(zxAnOtdrFastTestIfTable), and then starting fast test(zxAnOtdrFastTestSn, zxAnOtdrFastTestAction). NE restores to a previous state when the erroneous operations are performed. e.g. 1, When creating a port failed, NE needs to delete all the ports of this SN. e.g. 2, When creating ports succeeded, then starting test failed, NE needs to delete all the ports of this SN.
                         zxAnOtdrFastTestIfSn 1.3.6.1.4.1.3902.1083.5.2.2.1.2.1.1 displaystring no-access
OTDR fast test serial number.
                         zxAnOtdrAcceptanceTestIfParamPrf 1.3.6.1.4.1.3902.1083.5.2.2.1.2.1.2 displaystring read-only
OTDR acceptance test parameter profile name list chosen from zxAnOtdrIfAcceptanceTestPrf. e.g. 'DEFAULT-PULSE','DEFAULT-PULSE,DEFAULT-SEQUENCE', 'DEFAULT-PULSE,DEFAULT-SEQUENCE,DEFAULT-ACCEPTANCE'. If zxAnOtdrTestType is not acceptance(7), this should be empty.
                         zxAnOtdrFastTestIfRowStatus 1.3.6.1.4.1.3902.1083.5.2.2.1.2.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrFastTestIfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
             zxAnOtdrFastTestStatusObjects 1.3.6.1.4.1.3902.1083.5.2.2.2
                 zxAnOtdrFastTestStatusGlbObjects 1.3.6.1.4.1.3902.1083.5.2.2.2.1
                     zxAnOtdrFastTestCurrentPort 1.3.6.1.4.1.3902.1083.5.2.2.2.1.1 displaystring read-only
Current fast testing port index such as '1-1-3-2'. Return empty string means no port is being tested.
                     zxAnOtdrFastTestWaitTestPorts 1.3.6.1.4.1.3902.1083.5.2.2.2.1.2 integer32 read-only
Current fast test waiting test port number. Return 0 measns no port waiting test.
                 zxAnOtdrFastTestIfStatusTable 1.3.6.1.4.1.3902.1083.5.2.2.2.2 no-access
OTDR fast test port status table.
                     zxAnOtdrFastTestIfStatusEntry 1.3.6.1.4.1.3902.1083.5.2.2.2.2.1 no-access
OTDR fast test interface status entry.
                         zxAnOtdrFastTestIfStatus 1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.1 integer read-only
The result status of OTDR fast test. Enumeration: 'success': 3, 'notStarted': 1, 'failed': 4, 'waiting': 6, 'stopped': 5, 'inProgress': 2.
                         zxAnOtdrFastTestIfFailedReason 1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.2 integer read-only
The OTDR fast test failed reason. Enumeration: 'outOfMemory': 7, 'preempted': 15, 'endToEndOpticalPowerLossLow': 13, 'otherErrors': 255, 'noBindingProfile': 5, 'communicationError': 3, 'chipTestFailed': 8, 'opticalSwitchFailed': 6, 'testTimeout': 11, 'noError': 1, 'fiberNotConnected': 12, 'getTestParamsFailed': 2, 'saveFileFailed': 10, 'apdAlarm': 4, 'algorithmError': 9, 'waitTimeout': 14.
                         zxAnOtdrFastTestIfResultFile 1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.3 displaystring read-only
Fast test result file name. NE returns file name such as '1-1-5-1-20120505143302.csv' when the fast test sucess. NE returns empty string when the fast test failed.
                         zxAnOtdrFastTestIfParamPrfs 1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.4 integer32 read-only
Number of test parameter profile.
                         zxAnOtdrFastTestIfFinishedPrfs 1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.5 integer32 read-only
Number of finished test parameter profile.
                         zxAnOtdrFastTestIfEvalTotalTime 1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.6 integer32 read-only
OTDR test estimated total time.
                         zxAnOtdrFastTestIfElapsedTime 1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.7 integer32 read-only
OTDR test elapsed time.
             zxAnOtdrFastTestFileFtpObjects 1.3.6.1.4.1.3902.1083.5.2.2.3
                 zxAnOtdrFileFtpObjects 1.3.6.1.4.1.3902.1083.5.2.2.3.1
                     zxAnOtdrFileFtpIpAddressType 1.3.6.1.4.1.3902.1083.5.2.2.3.1.1 inetaddresstype read-write
IP address type of the FTP server.
                     zxAnOtdrFileFtpIpAddress 1.3.6.1.4.1.3902.1083.5.2.2.3.1.2 inetaddress read-write
IP address of the FTP server.
                     zxAnOtdrFileFtpProtocolType 1.3.6.1.4.1.3902.1083.5.2.2.3.1.3 integer read-write
Protocol type of the FTP server. ftp(1): File Transfer Protocol. sftp(2): Ssh File Transfer Protocol. Enumeration: 'ftp': 1, 'sftp': 2.
                     zxAnOtdrFileFtpUserName 1.3.6.1.4.1.3902.1083.5.2.2.3.1.4 displaystring read-write
User name of the FTP server.
                     zxAnOtdrFileFtpUserPwd 1.3.6.1.4.1.3902.1083.5.2.2.3.1.5 displaystring read-write
User password of the FTP server.
                     zxAnOtdrFileFtpPath 1.3.6.1.4.1.3902.1083.5.2.2.3.1.6 displaystring read-write
File path which starts from the root directory.
                     zxAnOtdrFileFtpFileName 1.3.6.1.4.1.3902.1083.5.2.2.3.1.7 displaystring read-write
The FTP file name.
                 zxAnOtdrFileFtpUploadStatusTable 1.3.6.1.4.1.3902.1083.5.2.2.3.2 no-access
OTDR file FTP status table.
                     zxAnOtdrFileFtpUploadStatusEntry 1.3.6.1.4.1.3902.1083.5.2.2.3.2.1 no-access
File FTP status entry.
                         zxAnOtdrFileFtpUploadFileName 1.3.6.1.4.1.3902.1083.5.2.2.3.2.1.1 displaystring no-access
OTDR test file name.
                         zxAnOtdrFileFtpUploadStatus 1.3.6.1.4.1.3902.1083.5.2.2.3.2.1.2 integer read-only
OTDR FTP status. Enumeration: 'failed': 4, 'inProgress': 2, 'notStarted': 1, 'success': 3.
                         zxAnOtdrFileFtpUploadFailReason 1.3.6.1.4.1.3902.1083.5.2.2.3.2.1.3 integer read-only
OTDR FTP failed reason. Enumeration: 'otherErrors': 255, 'noError': 1, 'fileNotExists': 2, 'connectionFailed': 3.
         zxAnOtdrRoutineTestObjects 1.3.6.1.4.1.3902.1083.5.2.3
             zxAnOtdrRoutineTaskIfTable 1.3.6.1.4.1.3902.1083.5.2.3.2 no-access
OTDR routine task interface table.
                 zxAnOtdrRoutineTaskIfEntry 1.3.6.1.4.1.3902.1083.5.2.3.2.1 no-access
OTDR routine task interface entry. The OTDR routine test consists of two steps, creating routine test ports (zxAnOtdrRoutineTaskIfTable), and then configuring routine task (zxAnOtdrRoutineTaskTable). NE restores to a previous state when the erroneous operations are performed. e.g. 1, When creating a port failed, NE needs to delete all the ports of this task. e.g. 2, When creating ports succeeded, then configuring routine task failed, NE needs to delete all the ports of this task.
                     zxAnOtdrRoutineTaskIfRowStatus 1.3.6.1.4.1.3902.1083.5.2.3.2.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrRoutineTaskIfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
             zxAnOtdrRoutineTaskTable 1.3.6.1.4.1.3902.1083.5.2.3.3 no-access
Routine test task table.
                 zxAnOtdrRoutineTaskEntry 1.3.6.1.4.1.3902.1083.5.2.3.3.1 no-access
Routine test task entry.
                     zxAnOtdrRoutineTaskName 1.3.6.1.4.1.3902.1083.5.2.3.3.1.1 displaystring no-access
OTDR routine test task name.
                     zxAnOtdrRoutineTaskStartTime 1.3.6.1.4.1.3902.1083.5.2.3.3.1.2 dateandtime read-only
The start time of OTDR routine test. For example:yyyy-mm-dd HH:MM:SS.(2013-01-01 00:00:00).
                     zxAnOtdrRoutineTaskInterval 1.3.6.1.4.1.3902.1083.5.2.3.3.1.3 integer32 read-only
The interval of OTDR routine test. The NE returns 0, when zxAnOtdrRoutineTaskTestMode is sequential test.
                     zxAnOtdrRoutineTaskActiveStatus 1.3.6.1.4.1.3902.1083.5.2.3.3.1.4 integer read-only
OTDR routine test task active status. Enumeration: 'stopped': 2, 'activated': 1.
                     zxAnOtdrRoutineTaskCurrStartTime 1.3.6.1.4.1.3902.1083.5.2.3.3.1.5 dateandtime read-only
The current routine test task start time.
                     zxAnOtdrRoutineTaskOperStatus 1.3.6.1.4.1.3902.1083.5.2.3.3.1.6 integer read-only
OTDR routine test task operational status. Enumeration: 'failed': 4, 'inProgress': 2, 'notStarted': 1, 'suspended': 5, 'success': 3.
                     zxAnOtdrRoutineTaskFailedReason 1.3.6.1.4.1.3902.1083.5.2.3.3.1.7 integer read-only
The OTDR routine test task failed reason. Enumeration: 'getTestParamsFailed': 2, 'packFileFailed': 6, 'communicationError': 3, 'otherErrors': 255, 'ftpServiceUnconfigured': 8, 'noError': 1, 'ftpFailed': 7, 'allPortsTestFailed': 5, 'apdAlarm': 4.
                     zxAnOtdrRoutineTaskResultFile 1.3.6.1.4.1.3902.1083.5.2.3.3.1.8 displaystring read-only
Routine test result file name. NE returns file name such as 'taskname-20120505143302.zip' when the routine test sucess. NE returns empty string when the routine test failed.
                     zxAnOtdrRoutineTaskTestMode 1.3.6.1.4.1.3902.1083.5.2.3.3.1.9 integer read-only
Routine task test mode. Enumeration: 'sequentialTest': 2, 'periodicalTest': 1.
                     zxAnOtdrRoutineTaskRowStatus 1.3.6.1.4.1.3902.1083.5.2.3.3.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrRoutineTaskEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
             zxAnOtdrRoutineTaskIfStatusTable 1.3.6.1.4.1.3902.1083.5.2.3.4 no-access
OTDR routine task interface status table
                 zxAnOtdrRoutineTaskIfStatusEntry 1.3.6.1.4.1.3902.1083.5.2.3.4.1 no-access
OTDR routine task interface status entry.
                     zxAnOtdrRoutineTaskIfStatus 1.3.6.1.4.1.3902.1083.5.2.3.4.1.1 integer read-only
The result status of OTDR routine test. Enumeration: 'failed': 4, 'inProgress': 2, 'notStarted': 1, 'success': 3.
                     zxAnOtdrRoutineTaskIfFailReason 1.3.6.1.4.1.3902.1083.5.2.3.4.1.2 integer read-only
The OTDR routine test failed reason. Enumeration: 'noError': 1, 'otherErrors': 255.
         zxAnOtdrFtpServerObjects 1.3.6.1.4.1.3902.1083.5.2.4
             zxAnOtdrFtpServerTable 1.3.6.1.4.1.3902.1083.5.2.4.2 no-access
FTP server configuration table.
                 zxAnOtdrFtpServerEntry 1.3.6.1.4.1.3902.1083.5.2.4.2.1 no-access
FTP server configuration entry.
                     zxAnOtdrFtpServerId 1.3.6.1.4.1.3902.1083.5.2.4.2.1.1 displaystring no-access
FTP server ID.
                     zxAnOtdrFtpServerIpAddressType 1.3.6.1.4.1.3902.1083.5.2.4.2.1.2 inetaddresstype read-only
IP address type of the FTP server.
                     zxAnOtdrFtpServerIpAddress 1.3.6.1.4.1.3902.1083.5.2.4.2.1.3 inetaddress read-only
IP address of the FTP server.
                     zxAnOtdrFtpServerProtocolType 1.3.6.1.4.1.3902.1083.5.2.4.2.1.4 integer read-only
Protocol type of the FTP server. ftp(1): File Transfer Protocol sftp(2): Ssh File Transfer Protocol Enumeration: 'ftp': 1, 'sftp': 2.
                     zxAnOtdrFtpServerUserName 1.3.6.1.4.1.3902.1083.5.2.4.2.1.5 displaystring read-only
User name of the FTP server.
                     zxAnOtdrFtpServerUserPwd 1.3.6.1.4.1.3902.1083.5.2.4.2.1.6 displaystring read-only
User password of the FTP server.
                     zxAnOtdrFtpServerPath 1.3.6.1.4.1.3902.1083.5.2.4.2.1.7 displaystring read-only
File path which starts from the root directory.
                     zxAnOtdrFtpServerRowStatus 1.3.6.1.4.1.3902.1083.5.2.4.2.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrFtpServerEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
         zxAnOtdrAlgorithmObjects 1.3.6.1.4.1.3902.1083.5.2.5
             zxAnOtdrAlgorithmTable 1.3.6.1.4.1.3902.1083.5.2.5.2 no-access
OTDR algorithm table.
                 zxAnOtdrAlgorithmEntry 1.3.6.1.4.1.3902.1083.5.2.5.2.1 no-access
OTDR algorithm entry.
                     zxAnOtdrAlgorithmRack 1.3.6.1.4.1.3902.1083.5.2.5.2.1.1 integer32 no-access
The rack No. of device to be used with OTDR.
                     zxAnOtdrAlgorithmShelf 1.3.6.1.4.1.3902.1083.5.2.5.2.1.2 integer32 no-access
The shelf No. of device to be used with OTDR.
                     zxAnOtdrAlgorithmSlot 1.3.6.1.4.1.3902.1083.5.2.5.2.1.3 integer32 no-access
The slot No. of device to be used with OTDR.
                     zxAnOtdrAlgorithmVersion 1.3.6.1.4.1.3902.1083.5.2.5.2.1.4 displaystring read-only
The OTDR algorithm version of current card.
         zxAnOtdrTestCapacityObjects 1.3.6.1.4.1.3902.1083.5.2.6
             zxAnOtdrTestCapDistanceObjects 1.3.6.1.4.1.3902.1083.5.2.6.1
                 zxAnOtdrTestCapDistanceGlbObjs 1.3.6.1.4.1.3902.1083.5.2.6.1.1
                     zxAnOtdrTestCapDistanceType 1.3.6.1.4.1.3902.1083.5.2.6.1.1.1 integer read-only
The type of the test capacity distance supported by OTDR. global(1): it means getting maximum-minimum distance by the global objects 'zxAnOtdrTestCapMaxDistance' and 'zxAnOtdrTestCapMinDistance'. pulseWidth(2): it means getting maximum-minimum distance by the table objects 'zxAnOtdrTestCapPwDistanceTable'. Enumeration: 'global': 1, 'pulseWidth': 2.
                     zxAnOtdrTestCapMaxDistance 1.3.6.1.4.1.3902.1083.5.2.6.1.1.2 integer32 read-only
The maximum of the global test capacity distance supported by OTDR.
                     zxAnOtdrTestCapMinDistance 1.3.6.1.4.1.3902.1083.5.2.6.1.1.3 integer32 read-only
The minimum of the global test capacity distance supported by OTDR.
                 zxAnOtdrTestCapPwDistanceTable 1.3.6.1.4.1.3902.1083.5.2.6.1.2 no-access
OTDR test capacity pulse width distance table.
                     zxAnOtdrTestCapPwDistanceEntry 1.3.6.1.4.1.3902.1083.5.2.6.1.2.1 no-access
OTDR test capacity pulse width distance entry.
                         zxAnOtdrTestCapPwDistancePw 1.3.6.1.4.1.3902.1083.5.2.6.1.2.1.1 integer32 no-access
The pulse width supported by OTDR. A value less than 200000 is mapped to an integer pulse width value. A value greater than 200000 is mapped to a specific pulse width value. e.g., 5 is mapped to 5ns, 200001 is mapped to 2.5ns.
                         zxAnOtdrTestCapPwMaxDistance 1.3.6.1.4.1.3902.1083.5.2.6.1.2.1.2 integer32 read-only
The maximum of the test capacity distance supported by the current pulse width.
                         zxAnOtdrTestCapPwMinDistance 1.3.6.1.4.1.3902.1083.5.2.6.1.2.1.3 integer32 read-only
The minimum of the test capacity distance supported by the current pulse width.
                 zxAnOtdrTestCapCwDistanceTable 1.3.6.1.4.1.3902.1083.5.2.6.1.3 no-access
OTDR test capacity code width distance table.
                     zxAnOtdrTestCapCwDistanceEntry 1.3.6.1.4.1.3902.1083.5.2.6.1.3.1 no-access
OTDR test capacity code width distance entry.
                         zxAnOtdrTestCapCwDistanceCw 1.3.6.1.4.1.3902.1083.5.2.6.1.3.1.1 integer32 no-access
The code width supported by OTDR.
                         zxAnOtdrTestCapCwMaxDistance 1.3.6.1.4.1.3902.1083.5.2.6.1.3.1.2 integer32 read-only
The maximum of the test capacity distance supported by the current code width.
                         zxAnOtdrTestCapCwMinDistance 1.3.6.1.4.1.3902.1083.5.2.6.1.3.1.3 integer32 read-only
The minimum of the test capacity distance supported by the current code width.
             zxAnOtdrTestCapDurationObjects 1.3.6.1.4.1.3902.1083.5.2.6.2
                 zxAnOtdrTestCapDurationGlbObjs 1.3.6.1.4.1.3902.1083.5.2.6.2.1
                     zxAnOtdrTestCapMaxDuration 1.3.6.1.4.1.3902.1083.5.2.6.2.1.1 integer32 read-only
The maximum of the test capacity duration supported by OTDR.
                     zxAnOtdrTestCapMinDuration 1.3.6.1.4.1.3902.1083.5.2.6.2.1.2 integer32 read-only
The minimum of the test capacity duration supported by OTDR.
         zxAnOtdrTestTaskObjects 1.3.6.1.4.1.3902.1083.5.2.7
             zxAnOtdrTestTaskStatusTable 1.3.6.1.4.1.3902.1083.5.2.7.1 no-access
OTDR test task status table.
                 zxAnOtdrTestTaskStatusEntry 1.3.6.1.4.1.3902.1083.5.2.7.1.1 no-access
OTDR test task status entry.
                     zxAnOtdrTestTaskId 1.3.6.1.4.1.3902.1083.5.2.7.1.1.1 displaystring no-access
OTDR test task ID. The task name is zxAnOtdrRoutineTaskName when the zxAnOtdrTestTaskType is routine, other tests relate to zxAnOtdrFastTestSn.
                     zxAnOtdrTestTaskStatus 1.3.6.1.4.1.3902.1083.5.2.7.1.1.2 integer read-only
The OTDR test task status. Enumeration: 'success': 5, 'notStarted': 1, 'failed': 6, 'waiting': 2, 'suspended': 4, 'inProgress': 3.
                     zxAnOtdrTestTaskUnexecutedReason 1.3.6.1.4.1.3902.1083.5.2.7.1.1.3 integer read-only
The OTDR test task unexecuted reason. Enumeration: 'waitingPortTestFinished': 3, 'none': 1, 'preempted': 2, 'others': 255, 'queuing': 4.
                     zxAnOtdrTestTaskPriority 1.3.6.1.4.1.3902.1083.5.2.7.1.1.4 integer32 read-only
The OTDR test task priority.
                     zxAnOtdrTestTaskWaitingTime 1.3.6.1.4.1.3902.1083.5.2.7.1.1.5 integer32 read-only
The OTDR test task waiting time. When the task is in progress, the waiting time is 0.
                     zxAnOtdrTestTaskRequestSource 1.3.6.1.4.1.3902.1083.5.2.7.1.1.6 integer read-only
The OTDR test task request source. Enumeration: 'tl1': 2, 'app': 3, 'ems': 1.
                     zxAnOtdrTestTaskType 1.3.6.1.4.1.3902.1083.5.2.7.1.1.7 integer read-only
The task type. fast(1): - Fast test. health(2): - Health database test. adHoc(3): - Ad hoc test. reflector(4): - Reflector test. alarmTrigger(5): - Alarm triggered test. adaptive(6): - Adaptive test. acceptance(7): - Acceptance test. labefaction(8): - Labefaction test. lineDetectionHealth(9): - Line detection health database test. lineDetectionFast(10): - Line detection fast test. bothway(11): - Bothway test. periodicalRoutineTest(50): - Periodical routine test. sequentialRoutineTest(51): - Sequential routine test. Enumeration: 'lineDetectionFast': 10, 'alarmTrigger': 5, 'lineDetectionHealth': 9, 'acceptance': 7, 'adHoc': 3, 'periodicalRoutineTest': 50, 'health': 2, 'fast': 1, 'sequentialRoutineTest': 51, 'adaptive': 6, 'labefaction': 8, 'bothway': 11, 'reflector': 4.
                     zxAnOtdrTestTaskStartTime 1.3.6.1.4.1.3902.1083.5.2.7.1.1.8 dateandtime read-only
The test task starting time.
                     zxAnOtdrTestTaskRemainTimeout 1.3.6.1.4.1.3902.1083.5.2.7.1.1.9 integer32 read-only
The OTDR test task remaining timeout. A negative indicates the task should never be timeout. A zero indicates the task has been timeout.
             zxAnOtdrFastTestTaskConfTable 1.3.6.1.4.1.3902.1083.5.2.7.2 no-access
OTDR fast test task configuration table.
                 zxAnOtdrFastTestTaskConfEntry 1.3.6.1.4.1.3902.1083.5.2.7.2.1 no-access
OTDR fast test task configuration entry.
                     zxAnOtdrFastTaskConfWaitTimeout 1.3.6.1.4.1.3902.1083.5.2.7.2.1.1 integer32 read-only
Fast test waiting timeout. The test will be cancelled when timeout.
                     zxAnOtdrFastTaskConfRowStatus 1.3.6.1.4.1.3902.1083.5.2.7.2.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrFastTestIfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
         zxAnOtdrMonNodeObjects 1.3.6.1.4.1.3902.1083.5.2.8
             zxAnOtdrMonNodeGlobalObjects 1.3.6.1.4.1.3902.1083.5.2.8.1
                 zxAnOtdrMonNodeMonitorStatus 1.3.6.1.4.1.3902.1083.5.2.8.1.1 integer read-only
OTDR node monitoring status. Enumeration: 'idle': 2, 'monitoring': 1.
                 zxAnOtdrMonNodeMonitorAction 1.3.6.1.4.1.3902.1083.5.2.8.1.2 integer read-write
OTDR node monitoring action. Enumeration: 'start': 1, 'stop': 2.
             zxAnOtdrMonNodeConfTable 1.3.6.1.4.1.3902.1083.5.2.8.2 no-access
OTDR monitoring node configuration table.
                 zxAnOtdrMonNodeConfEntry 1.3.6.1.4.1.3902.1083.5.2.8.2.1 no-access
OTDR monitoring node configuration entry.
                     zxAnOtdrMonNodeSn 1.3.6.1.4.1.3902.1083.5.2.8.2.1.1 displaystring no-access
OTDR monitoring node serial number.
                     zxAnOtdrMonNodePosition 1.3.6.1.4.1.3902.1083.5.2.8.2.1.2 integer32 read-only
OTDR monitoring node position. Value 0 means the monitoring node open/close test is not executed or the test is failed.
                     zxAnOtdrMonNodeStatus 1.3.6.1.4.1.3902.1083.5.2.8.2.1.3 integer read-only
OTDR monitoring node status. A zxAnOtdrMonNodeOpenedAlm trap will be sent when the zxAnOtdrMonNodeStatus is opened. A zxAnOtdrMonNodeOpenedClr trap will be sent when the zxAnOtdrMonNodeStatus is closed. Enumeration: 'unknown': 255, 'opened': 1, 'closed': 2.
                     zxAnOtdrNodeConfRowStatus 1.3.6.1.4.1.3902.1083.5.2.8.2.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrFastTestIfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
             zxAnOtdrMonPortStatusTable 1.3.6.1.4.1.3902.1083.5.2.8.3 no-access
OTDR monitoring port status table.
                 zxAnOtdrMonPortStatusEntry 1.3.6.1.4.1.3902.1083.5.2.8.3.1 no-access
OTDR monitoring port status entry.
                     zxAnOtdrMonPortLinkStatus 1.3.6.1.4.1.3902.1083.5.2.8.3.1.1 integer read-only
OTDR monitoring port link status. A zxAnOtdrMonPortLinkAbnormalAlm trap will be sent when the zxAnOtdrMonPortLinkStatus is abnormal. A zxAnOtdrMonPortLinkAbnormalClr trap will be sent when the zxAnOtdrMonPortLinkStatus is normal. Enumeration: 'unknown': 255, 'abnormal': 2, 'normal': 1.
             zxAnOtdrMonReflectLabelTable 1.3.6.1.4.1.3902.1083.5.2.8.4 no-access
OTDR reflector labelling table.
                 zxAnOtdrMonReflectLabelEntry 1.3.6.1.4.1.3902.1083.5.2.8.4.1 no-access
OTDR reflector labelling entry.
                     zxAnOtdrMonReflectLabelAction 1.3.6.1.4.1.3902.1083.5.2.8.4.1.1 integer read-write
OTDR reflector labelling action. Enumeration: 'start': 1.
                     zxAnOtdrMonReflectLabelStatus 1.3.6.1.4.1.3902.1083.5.2.8.4.1.2 integer read-only
OTDR reflector labelling status. Enumeration: 'success': 3, 'notStarted': 1, 'failed': 4, 'waiting': 6, 'stopped': 5, 'inProgress': 2.
                     zxAnOtdrMonReflectLabelLastTime 1.3.6.1.4.1.3902.1083.5.2.8.4.1.3 dateandtime read-only
OTDR reflector last labelling time.
         zxAnOtdrOptModuleMonitorObjects 1.3.6.1.4.1.3902.1083.5.2.9
             zxAnOtdrOptModuleGlobalObjects 1.3.6.1.4.1.3902.1083.5.2.9.1
                 zxAnOtdrOptModuleStatus 1.3.6.1.4.1.3902.1083.5.2.9.1.1 integer read-only
The OTDR optical module status. A zxAnOtdrOptModuleAbnormalAlm trap will be sent when the zxAnOtdrOptModuleStatus is abnormal. Enumeration: 'abnormal': 2, 'normal': 1.
             zxAnOtdrOptModuleIfTable 1.3.6.1.4.1.3902.1083.5.2.9.2 no-access
OTDR optical module interface table.
                 zxAnOtdrOptModuleIfEntry 1.3.6.1.4.1.3902.1083.5.2.9.2.1 no-access
OTDR optical module interface entry.
                     zxAnOtdrOptModuleIfBasicPwr 1.3.6.1.4.1.3902.1083.5.2.9.2.1.1 integer32 read-only
OTDR interface basic optical power. '65535' means the basic optical power is invalid.
                     zxAnOtdrOptModuleIfCurrentPwr 1.3.6.1.4.1.3902.1083.5.2.9.2.1.2 integer32 read-only
OTDR interface current optical power. '65535' means the current optical power is invalid.
                     zxAnOtdrOptModuleIfPwrVaryThresh 1.3.6.1.4.1.3902.1083.5.2.9.2.1.3 integer32 read-write
OTDR interface optical power variaton threshold. A zxAnOtdrOptPowerVaryExceedAlm trap is sent when the difference value of zxAnOtdrOptModuleIfBasicPwr and zxAnOtdrOptModuleIfCurrentPwr is higher than this threshold.
                     zxAnOtdrOptModuleIfPwrAdjust 1.3.6.1.4.1.3902.1083.5.2.9.2.1.4 integer read-write
To adjust the OTDR basic optical power. Enumeration: 'start': 1.
         zxAnOtdrFaultLocateObjects 1.3.6.1.4.1.3902.1083.5.2.10
               zxAnOtdrFaultLocateGlobalObjects 1.3.6.1.4.1.3902.1083.5.2.10.1
                   zxAnOtdrGlobalP2mpFaultLocatePrf 1.3.6.1.4.1.3902.1083.5.2.10.1.1 displaystring read-write
OTDR global P2MP fault locating threshold profile name. The global profile is applied to the interface when the interface fault locating profile is unconfigured.
                   zxAnOtdrGlobalP2pFaultLocatePrf 1.3.6.1.4.1.3902.1083.5.2.10.1.2 displaystring read-write
OTDR global P2P fault locating threshold profile name. The global profile is applied to the interface when the interface fault locating profile is unconfigured.
               zxAnOtdrP2mpFaultLocatePrfTable 1.3.6.1.4.1.3902.1083.5.2.10.2 no-access
OTDR P2MP fault locating threshold profile table.
                   zxAnOtdrP2mpFaultLocatePrfEntry 1.3.6.1.4.1.3902.1083.5.2.10.2.1 no-access
OTDR P2MP fault locating threshold profile entry.
                       zxAnOtdrP2mpFaultLocatePrfName 1.3.6.1.4.1.3902.1083.5.2.10.2.1.1 displaystring no-access
OTDR P2MP fault locating threshold profile name.
                       zxAnOtdrP2mpPositionDiff 1.3.6.1.4.1.3902.1083.5.2.10.2.1.2 integer32 read-only
OTDR P2MP position difference threshold.
                       zxAnOtdrP2mpTrunkBrokenLossDiff 1.3.6.1.4.1.3902.1083.5.2.10.2.1.3 integer32 read-only
OTDR P2MP trunk broken insertion loss difference threshold. This threshold is used to locate trunk broken fault.
                       zxAnOtdrP2mpTrunkBrokenLoss 1.3.6.1.4.1.3902.1083.5.2.10.2.1.4 integer32 read-only
OTDR P2MP trunk broken insertion loss threshold. This threshold is used to locate trunk broken fault.
                       zxAnOtdrP2mpTrunkAttenLossDiff 1.3.6.1.4.1.3902.1083.5.2.10.2.1.5 integer32 read-only
OTDR P2MP trunk attenuation insertion loss difference threshold. This threshold is used to locate trunk attenuation fault.
                       zxAnOtdrP2mpTrunkAttenLoss 1.3.6.1.4.1.3902.1083.5.2.10.2.1.6 integer32 read-only
OTDR P2MP trunk attenuation insertion loss threshold. This threshold is used to locate trunk attenuation fault.
                       zxAnOtdrP2mpTrunkAbnPeakDiff 1.3.6.1.4.1.3902.1083.5.2.10.2.1.7 integer32 read-only
OTDR P2MP trunk abnormal reflective peak difference threshold. This threshold is used to locate trunk abnormal fault.
                       zxAnOtdrP2mpTrunkAbnRtnLoss 1.3.6.1.4.1.3902.1083.5.2.10.2.1.8 integer32 read-only
OTDR P2MP trunk abnormal return loss threshold. This threshold is used to locate trunk abnormal fault.
                       zxAnOtdrP2mpTrunkAbnLoss 1.3.6.1.4.1.3902.1083.5.2.10.2.1.9 integer32 read-only
OTDR P2MP trunk abnormal insertion loss threshold. This threshold is used to locate trunk abnormal fault.
                       zxAnOtdrP2mpBranchBrokenRtnLoss 1.3.6.1.4.1.3902.1083.5.2.10.2.1.10 integer32 read-only
OTDR P2MP branch broken return loss threshold. This threshold is used to locate branch broken fault.
                       zxAnOtdrP2mpBranchBrokenLoss 1.3.6.1.4.1.3902.1083.5.2.10.2.1.11 integer32 read-only
OTDR P2MP branch broken insertion loss threshold. This threshold is used to locate branch broken fault.
                       zxAnOtdrP2mpBranchBrokenPeakDiff 1.3.6.1.4.1.3902.1083.5.2.10.2.1.12 integer32 read-only
OTDR P2MP branch broken reflective peak difference threshold. This threshold is used to locate branch broken fault.
                       zxAnOtdrP2mpBranchAbnPeakDiff 1.3.6.1.4.1.3902.1083.5.2.10.2.1.13 integer32 read-only
OTDR P2MP branch abnormal reflective peak difference threshold. This threshold is used to locate branch abnormal fault.
                       zxAnOtdrP2mpFaultLocPrfRowStatus 1.3.6.1.4.1.3902.1083.5.2.10.2.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrTestParamPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
               zxAnOtdrP2pFaultLocatePrfTable 1.3.6.1.4.1.3902.1083.5.2.10.3 no-access
OTDR P2P fault locating threshold profile table.
                   zxAnOtdrP2pFaultLocatePrfEntry 1.3.6.1.4.1.3902.1083.5.2.10.3.1 no-access
OTDR P2P fault locating threshold profile entry.
                       zxAnOtdrP2pFaultLocatePrfName 1.3.6.1.4.1.3902.1083.5.2.10.3.1.1 displaystring no-access
OTDR P2P fault locating threshold profile name.
                       zxAnOtdrP2pPositionDiff 1.3.6.1.4.1.3902.1083.5.2.10.3.1.2 integer32 read-only
OTDR P2P position difference threshold.
                       zxAnOtdrP2pBrokenLossDiff 1.3.6.1.4.1.3902.1083.5.2.10.3.1.3 integer32 read-only
OTDR P2P link broken insertion loss difference threshold. This threshold is used to locate link broken fault.
                       zxAnOtdrP2pBrokenLoss 1.3.6.1.4.1.3902.1083.5.2.10.3.1.4 integer32 read-only
OTDR P2P link broken insertion loss threshold. This threshold is used to locate link broken fault.
                       zxAnOtdrP2pAttenuationLossDiff 1.3.6.1.4.1.3902.1083.5.2.10.3.1.5 integer32 read-only
OTDR P2P link attenuation insertion loss difference threshold. This threshold is used to locate link attenuation fault.
                       zxAnOtdrP2pAttenuationLoss 1.3.6.1.4.1.3902.1083.5.2.10.3.1.6 integer32 read-only
OTDR P2P link attenuation insertion loss threshold. This threshold is used to locate link attenuation fault.
                       zxAnOtdrP2pAbnormalPeakDiff 1.3.6.1.4.1.3902.1083.5.2.10.3.1.7 integer32 read-only
OTDR P2P link abnormal reflective peak difference threshold. This threshold is used to locate link abnormal fault.
                       zxAnOtdrP2pAbnormalReturnLoss 1.3.6.1.4.1.3902.1083.5.2.10.3.1.8 integer32 read-only
OTDR P2P link abnormal return loss threshold. This threshold is used to locate link abnormal fault.
                       zxAnOtdrP2pAbnormalLoss 1.3.6.1.4.1.3902.1083.5.2.10.3.1.9 integer32 read-only
OTDR P2P link abnormal insertion loss threshold. This threshold is used to locate link abnormal fault.
                       zxAnOtdrP2pFaultLocPrfRowStatus 1.3.6.1.4.1.3902.1083.5.2.10.3.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrTestParamPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
               zxAnOtdrFaultLocateIfConfTable 1.3.6.1.4.1.3902.1083.5.2.10.4 no-access
OTDR interface fault locating threshold profile table.
                   zxAnOtdrFaultLocateIfConfEntry 1.3.6.1.4.1.3902.1083.5.2.10.4.1 no-access
OTDR interface fault locating threshold profile entry.
                       zxAnOtdrFaultLocateIfP2mpPrf 1.3.6.1.4.1.3902.1083.5.2.10.4.1.1 displaystring read-only
OTDR fault locating P2MP threshold profile name. Empty string means unconfigured.
                       zxAnOtdrFaultLocateIfP2pPrf 1.3.6.1.4.1.3902.1083.5.2.10.4.1.2 displaystring read-only
OTDR fault locating P2P threshold profile name. Empty string means unconfigured.
                       zxAnOtdrFaultLocateIfRowStatus 1.3.6.1.4.1.3902.1083.5.2.10.4.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrTestParamPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
         zxAnOtdrEventObjects 1.3.6.1.4.1.3902.1083.5.2.11
               zxAnOtdrIfEventBatchConfTable 1.3.6.1.4.1.3902.1083.5.2.11.2 no-access
OTDR interface event batch configuration table.
                   zxAnOtdrIfEventBatchConfEntry 1.3.6.1.4.1.3902.1083.5.2.11.2.1 no-access
OTDR interface event batch configuration entry.
                       zxAnOtdrIfEventBatchConfDevTypes 1.3.6.1.4.1.3902.1083.5.2.11.2.1.1 displaystring read-write
OTDR interface event device type list. The format of the value is as follows: '1:3-6,10;2:2,8'. It means that the device type value of the event ID including 3,4,5,6,10 is 1 and the device type value of the event ID including 2,8 is 2. It will return the empty string when reading this object.
               zxAnOtdrIfEventConfTable 1.3.6.1.4.1.3902.1083.5.2.11.3 no-access
OTDR interface event configuration table.
                   zxAnOtdrIfEventConfEntry 1.3.6.1.4.1.3902.1083.5.2.11.3.1 no-access
OTDR interface event configuration entry.
                       zxAnOtdrIfEventConfEventId 1.3.6.1.4.1.3902.1083.5.2.11.3.1.1 integer32 no-access
OTDR interface event ID.
                       zxAnOtdrIfEventConfDevType 1.3.6.1.4.1.3902.1083.5.2.11.3.1.2 integer32 read-write
OTDR interface event device type. Value 0 means the event device type is empty.
                       zxAnOtdrIfEventConfDevDesc 1.3.6.1.4.1.3902.1083.5.2.11.3.1.3 displaystring read-write
OTDR interface event device description.
         zxAnOtdrAdaptiveTestObjects 1.3.6.1.4.1.3902.1083.5.2.12
               zxAnOtdrAdaptiveTestLinkObjects 1.3.6.1.4.1.3902.1083.5.2.12.2
                   zxAnOtdrAdaptTestLinkGlbObjects 1.3.6.1.4.1.3902.1083.5.2.12.2.1
                       zxAnOtdrATLinkLossThresh 1.3.6.1.4.1.3902.1083.5.2.12.2.1.2 integer32 read-write
The global link loss threshold of the OTDR adaptive test. This global threshold is applied to the interface when the zxAnOtdrATLinkIfParamType is global(1).
                       zxAnOtdrATLinkRtnLossThresh 1.3.6.1.4.1.3902.1083.5.2.12.2.1.3 integer32 read-write
The global link return loss threshold of the OTDR adaptive test. This global threshold is applied to the interface when the zxAnOtdrATLinkIfParamType is global(1).
                   zxAnOtdrAdaptTestLinkIfConfTable 1.3.6.1.4.1.3902.1083.5.2.12.2.2 no-access
OTDR adaptive test link threshold interface configuration table.
                       zxAnOtdrAdaptTestLinkIfConfEntry 1.3.6.1.4.1.3902.1083.5.2.12.2.2.1 no-access
OTDR adaptive test link threshold interface configuration entry.
                           zxAnOtdrATLinkIfParamType 1.3.6.1.4.1.3902.1083.5.2.12.2.2.1.1 integer read-write
The link parameters type of the OTDR adaptive test. Enumeration: 'global': 1, 'userDefined': 2.
                           zxAnOtdrATLinkIfLossThresh 1.3.6.1.4.1.3902.1083.5.2.12.2.2.1.2 integer32 read-write
The link loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATLinkIfParamType is userDefined(2).
                           zxAnOtdrATLinkIfRtnLossThresh 1.3.6.1.4.1.3902.1083.5.2.12.2.2.1.3 integer32 read-write
The link return loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATLinkIfParamType is userDefined(2).
               zxAnOtdrAdaptiveTestDevObjects 1.3.6.1.4.1.3902.1083.5.2.12.3
                   zxAnOtdrAdaptTestDevGlbObjects 1.3.6.1.4.1.3902.1083.5.2.12.3.1
                       zxAnOtdrATDevFiberAttenThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.1.2 integer32 read-write
The global device fiber attenuation threshold of the OTDR adaptive test. This global threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
                       zxAnOtdrATDevLossThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.1.3 integer32 read-write
The global device loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
                       zxAnOtdrATDevReflThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.1.4 integer32 read-write
The global device reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
                       zxAnOtdrATDevConnLossThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.1.5 integer32 read-write
The global device connector loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
                       zxAnOtdrATDevConnReflThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.1.6 integer32 read-write
The global device connector reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
                       zxAnOtdrATDevSpliceLossThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.1.7 integer32 read-write
The global device splice loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
                       zxAnOtdrATDevSpReflThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.1.8 integer32 read-write
The global device splitter reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
                       zxAnOtdrATDevSp2LossThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.1.9 integer32 read-write
The global device splitter (the splitting ratio is 1:2 or 2:2) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
                       zxAnOtdrATDevSp4LossThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.1.10 integer32 read-write
The global device splitter (the splitting ratio is 1:4 or 2:4) loss threshold of the the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
                       zxAnOtdrATDevSp8LossThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.1.11 integer32 read-write
The global device splitter (the splitting ratio is 1:8 or 2:8) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
                       zxAnOtdrATDevSp16LossThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.1.12 integer32 read-write
The global device splitter (the splitting ratio is 1:16 or 2:16) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
                       zxAnOtdrATDevSp32LossThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.1.13 integer32 read-write
The global device splitter (the splitting ratio is 1:32 or 2:32) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
                       zxAnOtdrATDevSp64LossThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.1.14 integer32 read-write
The global device splitter (the splitting ratio is 1:64 or 2:64) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
                       zxAnOtdrATDevSp128LossThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.1.15 integer32 read-write
The global device splitter (the splitting ratio is 1:128 or 2:128) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
                       zxAnOtdrATDevOnuReflThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.1.16 integer32 read-write
The global device ONU reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
                   zxAnOtdrAdaptTestDevIfConfTable 1.3.6.1.4.1.3902.1083.5.2.12.3.2 no-access
OTDR adaptive test device threshold interface configuration table.
                       zxAnOtdrAdaptTestDevIfConfEntry 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1 no-access
OTDR adaptive test device threshold interface configuration evntry.
                           zxAnOtdrATDevIfParamType 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.1 integer read-write
The device parameters type of the OTDR adaptive test. Enumeration: 'global': 1, 'userDefined': 2.
                           zxAnOtdrATDevIfFiberAttenThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.2 integer32 read-write
The device fiber attenuation threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
                           zxAnOtdrATDevIfLossThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.3 integer32 read-write
The device loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
                           zxAnOtdrATDevIfReflThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.4 integer32 read-write
The device reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
                           zxAnOtdrATDevIfConnLossThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.5 integer32 read-write
The device connector loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
                           zxAnOtdrATDevIfConnReflThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.6 integer32 read-write
The device connector reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
                           zxAnOtdrATDevIfSpliceLossThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.7 integer32 read-write
The device splice loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
                           zxAnOtdrATDevIfSpReflThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.8 integer32 read-write
The device splitter reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
                           zxAnOtdrATDevIfSp2LossThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.9 integer32 read-write
The device splitter (the splitting ratio is 1:2 or 2:2) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
                           zxAnOtdrATDevIfSp4LossThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.10 integer32 read-write
The device splitter (the splitting ratio is 1:4 or 2:4) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
                           zxAnOtdrATDevIfSp8LossThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.11 integer32 read-write
The device splitter (the splitting ratio is 1:8 or 2:8) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
                           zxAnOtdrATDevIfSp16LossThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.12 integer32 read-write
The device splitter (the splitting ratio is 1:16 or 2:16) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
                           zxAnOtdrATDevIfSp32LossThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.13 integer32 read-write
The device splitter (the splitting ratio is 1:32 or 2:32) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
                           zxAnOtdrATDevIfSp64LossThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.14 integer32 read-write
The device splitter (the splitting ratio is 1:64 or 2:64) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
                           zxAnOtdrATDevIfSp128LossThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.15 integer32 read-write
The device splitter (the splitting ratio is 1:128 or 2:128) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
                           zxAnOtdrATDevIfOnuReflThresh 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.16 integer32 read-write
The device ONU reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
         zxAnOtdrDetectionLineObjects 1.3.6.1.4.1.3902.1083.5.2.13
               zxAnOtdrDetectionLineConfTable 1.3.6.1.4.1.3902.1083.5.2.13.2 no-access
OTDR detection line configuration table.
                   zxAnOtdrDetectionLineConfEntry 1.3.6.1.4.1.3902.1083.5.2.13.2.1 no-access
OTDR detection line configuration entry.
                       zxAnOtdrDetectLineId 1.3.6.1.4.1.3902.1083.5.2.13.2.1.1 integer32 no-access
OTDR detection line ID.
                       zxAnOtdrDetectLineLength 1.3.6.1.4.1.3902.1083.5.2.13.2.1.2 integer32 read-only
OTDR detection line length.
                       zxAnOtdrDetectLineAlias 1.3.6.1.4.1.3902.1083.5.2.13.2.1.3 displaystring read-write
OTDR detection line alias.
                       zxAnOtdrDetectLinePositionDiff 1.3.6.1.4.1.3902.1083.5.2.13.2.1.4 integer32 read-write
OTDR detection line position difference threshold.
                       zxAnOtdrDetectLineAbnPeakDiff 1.3.6.1.4.1.3902.1083.5.2.13.2.1.5 integer32 read-write
OTDR detection line abnormal reflective peak difference threshold.
                       zxAnOtdrDetectLineStatus 1.3.6.1.4.1.3902.1083.5.2.13.2.1.6 integer read-only
OTDR detection line status. A zxAnOtdrDetectionLineAbnAlm trap will be sent when the zxAnOtdrDetectionLineStatus is peakAbnormal or fiberBroken. A zxAnOtdrDetectionLineAbnClr trap will be sent when the zxAnOtdrDetectionLineStatus is normal. Enumeration: 'peakAbnormal': 2, 'fiberBroken': 3, 'unknown': 255, 'normal': 1.
     zxAnOtdrNotifications 1.3.6.1.4.1.3902.1083.5.3
         zxAnOtdrRoutineTaskFinished 1.3.6.1.4.1.3902.1083.5.3.1
A zxAnOtdrRoutineTaskFinished is sent when the agent has detected that the OTDR routine test task finished.
         zxAnOtdrPortTestFinished 1.3.6.1.4.1.3902.1083.5.3.2
A zxAnOtdrPortTestFinished is sent when the agent has detected that the OTDR port test finished.
         zxAnOtdrEnvTraps 1.3.6.1.4.1.3902.1083.5.3.50
               zxAnOtdrEnvCtrlCardHighTempAlm 1.3.6.1.4.1.3902.1083.5.3.50.1
A zxAnOtdrEnvCtrlCardHighTempAlm trap is sent when the current control card temperature is higher than zxAnOtdrCtrlCardTempHighThresh.
               zxAnOtdrEnvCtrlCardHighTempClr 1.3.6.1.4.1.3902.1083.5.3.50.2
A zxAnOtdrEnvCtrlCardHighTempClr trap is sent when the current control card temperature is lower than zxAnOtdrCtrlCardTempHighThresh.
               zxAnOtdrEnvCtrlCardLowTempAlm 1.3.6.1.4.1.3902.1083.5.3.50.3
A zxAnOtdrEnvCtrlCardLowTempAlm trap is sent when the current control card temperature is lower than zxAnOtdrCtrlCardTempLowThresh.
               zxAnOtdrEnvCtrlCardLowTempClr 1.3.6.1.4.1.3902.1083.5.3.50.4
A zxAnOtdrEnvCtrlCardLowTempClr trap is sent when the current control card temperature is higher than zxAnOtdrCtrlCardTempLowThresh.
               zxAnOtdrEnvFanFailureAlm 1.3.6.1.4.1.3902.1083.5.3.50.5
A zxAnOtdrEnvFanFailureAlm trap is sent when the zxAnOtdrEnvFanStatus is abnormal.
               zxAnOtdrEnvFanFailureClr 1.3.6.1.4.1.3902.1083.5.3.50.6
A zxAnOtdrEnvFanFailureClr trap is sent when the zxAnOtdrEnvFanStatus is normal.
               zxAnOtdrEnvApdHighTempAlm 1.3.6.1.4.1.3902.1083.5.3.50.7
A zxAnOtdrEnvApdHighTempAlm trap is sent when the APD current temperature is higher than zxAnOtdrEnvApdTempHighThresh.
               zxAnOtdrEnvApdHighTempClr 1.3.6.1.4.1.3902.1083.5.3.50.8
A zxAnOtdrEnvApdHighTempClr trap is sent when the APD current temperature is lower than zxAnOtdrEnvApdTempHighThresh.
               zxAnOtdrEnvApdLowTempAlm 1.3.6.1.4.1.3902.1083.5.3.50.9
A zxAnOtdrEnvApdLowTempAlm trap is sent when the APD current temperature is lower than zxAnOtdrEnvApdTempLowThresh.
               zxAnOtdrEnvApdLowTempClr 1.3.6.1.4.1.3902.1083.5.3.50.10
A zxAnOtdrEnvApdLowTempClr trap is sent when the APD current temperature is higher than zxAnOtdrEnvApdTempLowThresh.
               zxAnOtdrPortUtilExceedAlm 1.3.6.1.4.1.3902.1083.5.3.50.11
A zxAnOtdrPortUtilExceedAlm trap is sent when the current port utilization is higher than zxAnOtdrPortUtilizationThresh.
               zxAnOtdrPortUtilExceedClr 1.3.6.1.4.1.3902.1083.5.3.50.12
A zxAnOtdrPortUtilExceedClr trap is sent when the current port utilization is lower than zxAnOtdrPortUtilizationThresh.
         zxAnOtdrMonNodeTraps 1.3.6.1.4.1.3902.1083.5.3.51
               zxAnOtdrMonNodeOpenedAlm 1.3.6.1.4.1.3902.1083.5.3.51.1
A zxAnOtdrMonNodeOpenedAlm trap is sent when the zxAnOtdrMonNodeStatus is opened.
               zxAnOtdrMonNodeOpenedClr 1.3.6.1.4.1.3902.1083.5.3.51.2
A zxAnOtdrMonNodeOpenedClr trap is sent when the zxAnOtdrMonNodeStatus is closed.
               zxAnOtdrMonPortLinkAbnormalAlm 1.3.6.1.4.1.3902.1083.5.3.51.3
A zxAnOtdrMonPortLinkAbnormalAlm trap is sent when the zxAnOtdrMonPortLinkStatus is abnormal.
               zxAnOtdrMonPortLinkAbnormalClr 1.3.6.1.4.1.3902.1083.5.3.51.4
A zxAnOtdrMonPortLinkAbnormalClr trap is sent when the zxAnOtdrMonPortLinkStatus is normal.
         zxAnOtdrOptModuleMonitorTraps 1.3.6.1.4.1.3902.1083.5.3.52
               zxAnOtdrOptModuleAbnormalAlm 1.3.6.1.4.1.3902.1083.5.3.52.1
A zxAnOtdrOptModuleAbnormalAlm is sent when the zxAnOtdrOptModuleStatus is abnormal.
               zxAnOtdrOptModuleAbnormalClr 1.3.6.1.4.1.3902.1083.5.3.52.2
A zxAnOtdrOptModuleAbnormalClr is sent when the zxAnOtdrOptModuleStatus is normal.
               zxAnOtdrOptPowerVaryExceedAlm 1.3.6.1.4.1.3902.1083.5.3.52.3
A zxAnOtdrOptPowerVaryExceedAlm trap is sent when the difference value of zxAnOtdrOptModuleIfBasicPwr and zxAnOtdrOptModuleIfCurrentPwr is higher than zxAnOtdrOptModuleIfPwrVaryThresh.
               zxAnOtdrOptPowerVaryExceedClr 1.3.6.1.4.1.3902.1083.5.3.52.4
A zxAnOtdrOptPowerVaryExceedClr trap is sent when the difference value of zxAnOtdrOptModuleIfBasicPwr and zxAnOtdrOptModuleIfCurrentPwr is lower than zxAnOtdrOptModuleIfPwrVaryThresh.
         zxAnOtdrDetectionLineTraps 1.3.6.1.4.1.3902.1083.5.3.53
               zxAnOtdrDetectionLineAbnAlm 1.3.6.1.4.1.3902.1083.5.3.53.1
A zxAnOtdrDetectionLineAbnAlm is sent when the zxAnOtdrDetectionLineStatus is peakAbnormal or brokenFiber.
               zxAnOtdrDetectionLineAbnClr 1.3.6.1.4.1.3902.1083.5.3.53.2
A zxAnOtdrDetectionAbnClr is sent when the zxAnOtdrDetectionLineStatus is normal.