ZHONE-ISDN-MIB: View SNMP OID List / Download MIB

VENDOR: ZHONE TECHNOLOGIES


 Home MIB: ZHONE-ISDN-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, Zhone, PerfHist-TC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
     zhoneIsdnTrap 1.3.6.1.4.1.5504.3.8.3
Trap for zedge to be sent to ZMS for far end code violation.
         isdnMibV2Traps 1.3.6.1.4.1.5504.3.8.3.1
This object identity adds a zero(0) for the next to last sub-identifier which should be used for new SNMPv2 Traps.
             isdnTrapFrameSynchLoss 1.3.6.1.4.1.5504.3.8.3.1.1
When the driver receives three successive out of synch frames then it will set the frame synch loss bit to true and then the application will send a trap to the NMS. After this when the driver detects 5 good frames then it will set the frame synch lossbit to false.
             isdnTrapFECV 1.3.6.1.4.1.5504.3.8.3.1.2
Far end code violation Trap
             isdnTrapAmiViolations 1.3.6.1.4.1.5504.3.8.3.1.3
Bad Ami violation Trap. If number of ami violation crosses the isdnThresholdAmiViolations then the application will send this to NMS.
             isdnTrapUnbalancedFrame 1.3.6.1.4.1.5504.3.8.3.1.4
This trap will be sent to NMS after the isdnThresholdUnbalancedFrame value is crossed.
 zhoneIsdn 1.3.6.1.4.1.5504.5.7
ISDN BRI S/T Interface MIB module. This MIB manages the ISDN BRI S/T Interface on Zedge .
     zhoneIsdnMib 1.3.6.1.4.1.5504.5.7.1
         isdnConfigTable 1.3.6.1.4.1.5504.5.7.1.1 no-access
The ISDN BRI integrated S/T Interface Configuration Table. This table is indexed by IfIndex.It is created by aplication when the system comes up with default values.
             isdnConfigEntry 1.3.6.1.4.1.5504.5.7.1.1.1 no-access
An entry in the ISDN config table for each S/T Interface.
                 isdnLineTermClass 1.3.6.1.4.1.5504.5.7.1.1.1.1 integer read-write
NT Terminal Mode.clas1 and class2 operations are as per CCITT I.430, ETSI ETS 300012, and ANSI T1.605 .These specification mandate two classes of operation for a TE with respect to D channel operation class1 : class1 is the higher class , used for signalling information class2 : This is the lower class. The default value is class1. Enumeration: 'class2': 2, 'class1': 1.
                 isdnActivationTimer2 1.3.6.1.4.1.5504.5.7.1.1.1.2 integer read-write
Value of Activation Timer #2. t2-50ms(1): select 50ms for timer #2 t2-100ms(2): select 1000ms for timer #2 The default value is t2-50ms Enumeration: 't2-100ms': 2, 't2-50ms': 1.
                 isdnLineLoopBack 1.3.6.1.4.1.5504.5.7.1.1.1.3 integer read-write
loop-back-none(1) :no loop back . loop-back-b1-st-tr(2): transparaent loopback on the S/T interface towards the user(B1 chanel). loop-back-b1-st-nt(3): non-transparent loopback onthe S/T interface towards the user(B1 chanel).. loop-back-b2-st-tr(4) :transparaent loopback on the S/T interface towards the user(B2 chanel). loop-back-b2-st-nt(5):non-transparent loopback on the S/T interface towards the user(B2 channel) loop-back-b1-idl2-tr(6):transparaent loopback on the IDL2 interface towards the system(B1 channel) loop-back-b1-idl2-nt(7):non-transparent loopback on the IDL2 interface towards the system(B1 channel) loop-back-b2-idl2-tr(8):transparaent loopback on the IDL2 interface towards the system(B2 channel) loop-back-b2-idl2-nt(9): non-transparent loopback on the IDL2 interface towards the system(B2 channel) loop-back-2bd-idl2-tr(10): transparent loopback on the IDL2 towards the system(2B + D channel) loop-back-2bd-idl2-nt(11): non-transparent loopback on the IDL2 towards the system(2B + D channel) loop-back-2bd-u-interface-tr (12): transparent loopback on the U interface towards the user(2B + D channel) loop-back-2bd-u-interface-nt (13): non-transparent loopback on the U interface(2B + D channel) loop-back-2bd-external-analog(14): loopback on the external analog interface towards the user(2B + D channel) st is loopback on the S/T interface towards the user. idl2 is loopback on the IDL2 interface towards the system. tr is transparent loopback. nt is non-transparent loopback. The default value is loop-back-none. Enumeration: 'loop-back-2bd-u-interface-nt': 13, 'loop-back-b1-idl2-nt': 7, 'loop-back-2bd-idl2-nt': 11, 'loop-back-2bd-u-interface-tr': 12, 'loop-back-b2-st-nt': 5, 'loop-back-2bd-idl2-tr': 10, 'loop-back-2bd-external-analog': 14, 'loop-back-b2-idl2-nt': 9, 'loop-back-none': 1, 'loop-back-b1-idl2-tr': 6, 'loop-back-b2-idl2-tr': 8, 'loop-back-b1-st-tr': 2, 'loop-back-b2-st-tr': 4, 'loop-back-b1-st-nt': 3.
                 isdnLinePower 1.3.6.1.4.1.5504.5.7.1.1.1.4 integer read-write
State of the line power. off - no power on line. sealing - minimum current on line to preclude corrosion. powering - full current on line. Enumeration: 'sealing': 2, 'off': 1, 'powering': 3.
         isdnPerfDataCurrentTable 1.3.6.1.4.1.5504.5.7.1.2 no-access
The ISDN BRI S/T interface performance table which contains the performance data for curent 15 minutes. It contains information about the status of the ISDN S/T interface, including the error statistics.
             isdnPerfDataCurrentEntry 1.3.6.1.4.1.5504.5.7.1.2.1 no-access
An entry in current performance table for each ISDN BRI S/T interface for last 15 minutes.
                 isdnPerfCurBadAmiViolation 1.3.6.1.4.1.5504.5.7.1.2.1.1 perfcurrentcount read-only
Current count of frames with incorrect number of AMI violations.
                 isdnPerfCurUnbalancedFrame 1.3.6.1.4.1.5504.5.7.1.2.1.2 perfcurrentcount read-only
Current count of unbalanced frames.
                 isdnPerCurErrorSeconds 1.3.6.1.4.1.5504.5.7.1.2.1.3 perfcurrentcount read-only
Curent ISDN Activation error seconds.
                 isdnPerCurFsyncSeconds 1.3.6.1.4.1.5504.5.7.1.2.1.4 perfcurrentcount read-only
Currents Frame synch loss seconds .
                 isdnPerfCurTimeElapsed 1.3.6.1.4.1.5504.5.7.1.2.1.5 timeticks read-only
In the current 15 Min period number of seconds elapsed that these counts represent.
         isdnPerfDataPreviousTable 1.3.6.1.4.1.5504.5.7.1.3 no-access
The ISDN BRI S/T interface performance table, it contains statistics and information about the status of the ISDN S/T interface, including the error statistics for previous 15 minutes.
             isdnPerfDataPreviousEntry 1.3.6.1.4.1.5504.5.7.1.3.1 no-access
An entry in Previous performance table(for last 15 minutes before the current performance period) for each S/T interface.
                 isdnPerfPrevBadAmiViolation 1.3.6.1.4.1.5504.5.7.1.3.1.1 perfintervalcount read-only
count of frames with incorrect number of AMI violations in previous 15 minutes.
                 isdnPerfPrevUnbalancedFrame 1.3.6.1.4.1.5504.5.7.1.3.1.2 perfintervalcount read-only
In previous 15 minutes ,count of unbalanced frames.
                 isdnPerPrevFsyncSeconds 1.3.6.1.4.1.5504.5.7.1.3.1.3 perfintervalcount read-only
Frame synch error seconds in previous 15 minues.
                 isdnPerfPrevErrorSeconds 1.3.6.1.4.1.5504.5.7.1.3.1.4 perfintervalcount read-only
In previous 15 minutes ISDN Activation error seconds
         isdnPerfDataTotalTable 1.3.6.1.4.1.5504.5.7.1.4 no-access
The ISDN BRI S/T interface performance table, it contains statistics and information about the status of the ISDN S/T interface, including the error statistics for up to the the last 24 hours. This is maintained in 15 minute intervals NOT including the current interval being accumulated. When the current period reaches 15 minutes, it's counts are rolled into the previous entry and added to these values. The 97th entry, previous to the 24 hour period is no longer included in these counts.
             isdnPerfDataTotalEntry 1.3.6.1.4.1.5504.5.7.1.4.1 no-access
An entry in total performance table for each S/T interface.
                 isdnPerfTotalBadAmiViolation 1.3.6.1.4.1.5504.5.7.1.4.1.1 perftotalcount read-only
Total count of frames with incorrect number of AMI violations.
                 isdnPerfTotalUnbalancedFrame 1.3.6.1.4.1.5504.5.7.1.4.1.2 perftotalcount read-only
Total count of unbalanced frames.
                 isdnPerTotalFsyncSeconds 1.3.6.1.4.1.5504.5.7.1.4.1.3 perftotalcount read-only
Total Frame synch error seconds.
                 isdnPerfTotalErrorSeconds 1.3.6.1.4.1.5504.5.7.1.4.1.4 perftotalcount read-only
ISDN Activation error seconds
                 isdnPerfTotalTimePeriodsElapsed 1.3.6.1.4.1.5504.5.7.1.4.1.5 integer32 read-only
Number of 15 minute time periods that have been used in the performance total table. This value is normally 96 indicating a valid 24 hour time period except in the cases of a restart of this agent.
         isdnAlarmProfileTable 1.3.6.1.4.1.5504.5.7.1.5 no-access
This table contains information for Alarm conditions. The table is indexed by IfIndex . The alarm profile will be set per port basis usig ifIndex by the application when the system comes up. The operator can not create the profile , he can only change it .
             isdnAlarmProfileEntry 1.3.6.1.4.1.5504.5.7.1.5.1 no-access
An entry in AlarmProfile Table.
                 isdnThresholdAmiViolations 1.3.6.1.4.1.5504.5.7.1.5.1.1 unsigned32 read-write
Threshold for number of AMI violation . If the number of violations cross this threshold then the notification is sent to NMS. 0 will disable the trap. The default value is 0. There is no range speciffied for this.
                 isdnThresholdUnbalancedFrame 1.3.6.1.4.1.5504.5.7.1.5.1.2 unsigned32 read-write
Threshold for number of unbalanced frame after which the trap will be send to NMS.0 will disable the trap. The default value is 0. There is no range speciffied for this.