ZHNLANDEVICE: View SNMP OID List / Download MIB

VENDOR: ZHONE TECHNOLOGIES


 Home MIB: ZHNLANDEVICE
Download as:   
SNMPv2-CONF, ZHNLAYER2BRIDGING, SNMPv2-SMI, Zhone, Zhone-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zhnLANDevice 1.3.6.1.4.1.5504.2.5.41
This file defines the private Enterprise MIB extensions that define LAN ethernet interface related objects supported by the Zhone CPEs.
       zhnLANDeviceObjects 1.3.6.1.4.1.5504.2.5.41.1
           lanDeviceTable 1.3.6.1.4.1.5504.2.5.41.1.1 no-access
Table of LAN devices, including Ethernet, WLAN, and USB physical interfaces
               lanDeviceEntry 1.3.6.1.4.1.5504.2.5.41.1.1.1 no-access
Table of LAN devices, including Ethernet, WLAN, and USB physical interfaces. Each instance contains all LAN-related objects for a given bridged subnet.
                   lanDeviceIndex 1.3.6.1.4.1.5504.2.5.41.1.1.1.1 unsigned32 no-access
LAN Device ifIndex
                   lanEthernetInterfaceNumberOfEntries 1.3.6.1.4.1.5504.2.5.41.1.1.1.2 unsigned32 read-only
Number of instances of lanEthernetInterfaceConfig entries for this LAN device.
                   lanUSBInterfaceNumberOfEntries 1.3.6.1.4.1.5504.2.5.41.1.1.1.3 unsigned32 read-only
Number of instances of lanUSBInterfaceConfig entries for this LAN device.
                   lanWLANConfigurationNumberOfEntries 1.3.6.1.4.1.5504.2.5.41.1.1.1.4 unsigned32 read-only
Number of instances of lanWLANInterfaceConfig entries for this LAN device.
                   lanMocaInterfaceNumberOfEntries 1.3.6.1.4.1.5504.2.5.41.1.1.1.5 unsigned32 read-only
Number of instances of lanMocaInterfaceConfig entries for this LAN device.
           igmpSnoopingCfgTable 1.3.6.1.4.1.5504.2.5.41.1.2 no-access
Table of IGMP configuration information for LAN devices, including Ethernet, WLAN, and USB physical interfaces
               igmpSnoopingCfgEntry 1.3.6.1.4.1.5504.2.5.41.1.2.1 no-access
Table of IGMP configuration information for LAN devices, including Ethernet, WLAN, and USB physical interfaces.
                   igmpEnable 1.3.6.1.4.1.5504.2.5.41.1.2.1.1 truthvalue read-write
Enables or disables IGMP snooping for the LAN device.
                   igmpMode 1.3.6.1.4.1.5504.2.5.41.1.2.1.2 igmpsnoopingmodevalues read-write
IGMP Snooping mode. Enumeration of: Standard Blocking
                   igmpIfName 1.3.6.1.4.1.5504.2.5.41.1.2.1.3 octet string read-only
The interface name for this LAN device. This object has the same value as the ipInterfaceifName object in the ipInterfaceTable and is included within the IGMP table for convenience purposes.
           lanHostConfigManagementObjects 1.3.6.1.4.1.5504.2.5.41.1.3
               lanHostConfigManagementTable 1.3.6.1.4.1.5504.2.5.41.1.3.1 no-access
Table of LAN Host Configuration Management information for LAN devices, including Ethernet, WLAN, and USB physical interfaces
                   lanHostConfigManagementEntry 1.3.6.1.4.1.5504.2.5.41.1.3.1.1 no-access
Table of LAN Host Configuration Management information for LAN devices, including Ethernet, WLAN, and USB physical interfaces
                       dhcpServerConfigurable 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.1 truthvalue read-write
Enables the configuration of the DHCP server on the LAN interface If this variable is set to false, the CPE should restore its default DHCP server settings.
                       zhnDhcpServerEnable 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.2 truthvalue read-write
Enables or disables the DHCP server on the LAN interface.
                       dhcpRelay 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.3 truthvalue read-only
Indicates if the DHCP server performs the role of a server or a relay on the LAN interface.
                       dhcpRelayServer 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.4 ipaddress read-write
DHCP Relay Server IP Address.
                       minAddress 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.5 ipaddress read-write
Specifies first address in the pool to be assigned by the DHCP server on the LAN interface.
                       maxAddress 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.6 ipaddress read-write
Specifies last address in the pool to be assigned by the DHCP server on the LAN interface.
                       reservedAddresses 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.7 octet string read-write
Comma separated list of addresses marked reserved from the address allocation pool.
                       subnetMask 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.8 ipaddress read-write
DHCP client subnet mask
                       dnsServers 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.9 octet string read-write
Comma separated list of DNS servers offered to DHCP clients. Support for more than three DNS Servers is Optional.
                       domainName 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.10 octet string read-write
Sets the domain name to provide to clients on the LAN interface.
                       ipRouters 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.11 octet string read-write
Comma separated list of IP addresses of routers on this subnet. Also known as default gateway. Support for more than one Router address is Optional.
                       dhcpLeaseTime 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.12 integer read-write
Specifies the lease time in seconds of client assigned addresses. A value of -1 indicates an infinite lease.
                       ipInterfaceNumberOfEntries 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.13 unsigned32 read-only
Number of IP interface at LAN side of the CPE. 1 is a typical value for CPE not supporting Multihomed interfaces. Support for more than one interface instance is Optional.
               ipInterfaceObjects 1.3.6.1.4.1.5504.2.5.41.1.3.2
                   zhnIpInterfaceTable 1.3.6.1.4.1.5504.2.5.41.1.3.2.1 no-access
IP interface table.
                       zhnIpInterfaceEntry 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1 no-access
IP interface table.
                           ipInterfaceIndex 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.1 unsigned32 no-access
LAN IP Address Index
                           ipInterfaceEnable 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.2 truthvalue read-only
Enables or disables this entry.
                           ipInterfaceIPAddress 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.3 ipaddress read-write
IP address of the LAN-side interface of the CPE.
                           ipInterfaceSubnetMask 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.4 ipaddress read-write
Subnet mask of the LAN-side interface of the CPE.
                           ipInterfaceAddressingType 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.5 ipinterfaceaddressingtypevalues read-write
Represents the addressing method used to assign the LAN-side IP address of the CPE on this interface of the CPE. Enumeration of: DHCP Static Auto-IP
                           ipInterfaceifName 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.6 octet string read-only
The interface name for this LAN device.
                           firewallEnabled 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.7 truthvalue read-write
Indicates if a stateful firewall is enabled for all traffic from this IP interface to the modem. If TRUE, all inbound local traffic (from LAN to modem) that is not responding to an outbound packet or listed in the firewall exception table will be blocked.
                           defaultGateway 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.8 ipaddress read-write
The IP address of the default gateway for this IP interface. This parameter is configurable only if the AddressingType is Static.
                           natEnabled 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.9 truthvalue read-write
This parameter enables or disables NAT for this IP interface. This parameter is configurable only if this interface is on an uplink port.
                           dhcpcPid 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.10 unsigned32 read-only
If the address type is DHCP, then we will start a DHCP client to get the IP address for this IP interface. The process ID (pid) is stored in this field. A pid of 0 indicates that no dhcpc is running.
                           dnsType 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.11 dnstypevalues read-write
This object specifies the DNS mode for this IP interface. The DNS associates hostname-to-IP address, and so domain names and IP addresses can be used interchangeably. Enumeration of: Default - Get the DNS information from the uplink interface Static - The DNSinformation is manually provisioned DHCP - The DNS information is obtained via DHCP
                           primaryDnsIPAddress 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.12 ipaddress read-write
The DNS server primary IP address.
                           secondaryDnsIPAddress 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.13 ipaddress read-write
The DNS server secondary IP address.
                           zhnVlanType 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.14 vlantypevalues read-write
This object specifies the VLAN connection type of the interface.
                           connectionType 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.15 ippppoeconnectiontypevalues read-write
This object specifies the connection type of the interface.
                           maxMTUSize 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.16 unsigned32 read-write
The maximum size of IP packet that can be transmitted without fragmentation - including IP headers but excluding headers from lower levels in the protocol stack. The default MTU size is 1500 bytes.
                           alternateWanIfName 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.17 octet string read-write
Name of a different VLAN WAN interface to run on if the current VLAN WAN interface is set to unconfigured.
                           naptEnabled 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.18 truthvalue read-write
This parameter enables or disables NAPT for this IP interface. This parameter is configurable only if this interface is on an uplink port.
                   pppoeConfigObjects 1.3.6.1.4.1.5504.2.5.41.1.3.2.2
                       pppoeConfigTable 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1 no-access
PPPoE configuration interface table for LAN interfaces.
                           pppoeConfigEntry 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1 no-access
PPPoE configuration table entry.
                               pppoeIfName 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.1 octet string read-only
The interface name for this LAN device.
                               pid 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.2 unsigned32 read-only
This object holds the process id (pid) of the pppd associated with this connection. A pid of 0 indicates that there is no pppd running.
                               connectionRequest 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.3 pppuserconnectionrequestvalues read-write
This object is used to bring up or down a PPPoE connection. Enumeration of: None Down Up Connect Disconnect
                               username 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.4 octet string read-write
PPP requires that you have a user name and password to establish your connection. This object is the login user name to be used for PPP authentication.
                               password 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.5 octet string read-write
PPP requires that you have a user name and password to establish your connection. This object is the login password to be used for PPP authentication. When read, this parameter returns an empty string, regardless of the actual value.
                               authentication 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.6 pppauthenticationprotocolvalues read-write
This object is the PPP authentication protocol to be used for PPP authentication. Enumeration of: AUTO_AUTH PAP CHAP MS-CHAP
                               serviceName 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.7 octet string read-write
This object is the PPP Service Name. It should be filled only if specified by the provider.
                               encryptionProtocol 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.8 pppencryptionprotocolvalues read-write
This object describes the PPP encryption protocol. Enumeration of: None MPPE
                               compressionProtocol 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.9 pppcompressionprotocolvalues read-write
This object describes the PPP compression protocol used between the WAN device and the ISP POP. Enumeration of: None VanJacobsen STAC-LZS
                               idleDisconnectTime 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.10 unsigned32 read-write
The time in seconds that if the connection remains idle, the CPE automatically terminates the connection. A value of 0 (zero) indicates that the connection is not to be shutdown automatically.
                               holdOffTime 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.11 unsigned32 read-write
Set time in seconds before retrying connection.
                               useStaticIpAddress 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.12 truthvalue read-write
If TRUE, PPPoE connection will use a static IP address.
                               staticIpAddress 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.13 ipaddress read-write
PPPoE static IP address.
                               enableDebug 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.14 truthvalue read-write
Enable PPPoE debug.
                   pppoeStatusObjects 1.3.6.1.4.1.5504.2.5.41.1.3.2.3
                       pppoeStatusTable 1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1 no-access
PPPoE configuration interface table for LAN interfaces.
                           pppoeStatusEntry 1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1 no-access
PPPoE status table entry.
                               connectionStatus 1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1.1 wanpppconnectionstatusvalues read-only
Current status of the PPP connection.
                               lastConnectionError 1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1.2 wanppplastconnectionerrorvalues read-only
The failure reason of the last PPP connection setup.
                               connectionEstablishedTime 1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1.3 unsigned32 read-only
The last time the PPP connection was established.
                               currentMTUSize 1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1.4 unsigned32 read-only
The current MTU in use over this connection.
                               uptime 1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1.5 unsigned32 read-only
The time in seconds this connection has been up.
               zhnDhcpConditionalServingPoolObjects 1.3.6.1.4.1.5504.2.5.41.1.3.3
                   zhnDhcpConditionalServingPoolTable 1.3.6.1.4.1.5504.2.5.41.1.3.3.1 no-access
A collection of configuration parameters for DHCP conditional serving.
                       zhnDhcpConditionalServingPoolEntry 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1 no-access
DHCP Conditional Serving Pool table.
                           dhcpPoolIndex 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.1 unsigned32 no-access
DHCP pool index
                           dhcpPoolEnable 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.2 truthvalue read-only
Enables or disables this entry.
                           dhcpPoolChaddr 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.3 macaddress read-write
MAC address of the physical interface of the DHCP client. A perfect match is needed. An empty value indicates this criterion is not used for conditional serving.
                           dhcpPoolChaddrMask 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.4 macaddress read-write
Chaddr is only to be done for bit positions set to one in the mask. A mask of FF:FF:FF:FF:FF:FF indicates all bits of the Chaddr are to be used for classification. A perfect match is needed. An empty value indicates this criterion is not used for conditional serving.
                           dhcpPoolMinAddress 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.5 ipaddress read-write
Specifies first address in the pool to be assigned by the DHCP server on the LAN interface.
                           dhcpPoolMaxAddress 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.6 ipaddress read-write
Specifies last address in the pool to be assigned by the DHCP server on the LAN interface.
                           dhcpPoolReservedAddresses 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.7 octet string read-write
Comma separated list of addresses marked reserved from the address allocation pool.
                           dhcpPoolSubnetMask 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.8 ipaddress read-write
Specifies the clients network subnet mask.
                           dhcpPoolDnsServers 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.9 octet string read-write
Comma separated list of DNS servers offered to DHCP clients. Support for more than three DNS Servers is Optional.
                           dhcpPoolDomainName 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.10 octet string read-write
Sets the domain name to provide to clients on the LAN interface.
                           dhcpPoolIPRouters 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.11 octet string read-write
Comma separated list of IP addresses of routers on this subnet. Also known as default gateway. Support for more than one Router address is Optional.
                           dhcpPoolLeaseTime 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.12 integer read-write
Specifies the lease time in seconds of client assigned addresses. A value of -1 indicates an infinite lease.
                           dhcpPoolUseWanVlan 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.13 unsigned32 read-write
The WAN VLAN is used to determine the default gateway router for upstream packets that have a source IP address in this subnet. A zero value indicates that the WAN VLAN is not used.
                           dhcpPoolEnableStaticLease 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.14 truthvalue read-write
Enable this option to permanently bind the IP address to the client MAC.
                           dhcpPoolRowStatus 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.15 zhonerowstatus read-write
The SNMP RowStatus of the current row. The following object must be specified upon row creation: dhcpPoolChaddr
           zhnLANEthernetInterfaceObjects 1.3.6.1.4.1.5504.2.5.41.1.4
               lanEthernetInterfaceConfigTable 1.3.6.1.4.1.5504.2.5.41.1.4.1 no-access
Table of LAN ethernet interface configuration objects. This object models an Ethernet LAN connection on a CPE device. This object must be implemented for all CPEs that contain an Ethernet interface on the LAN side.
                   lanEthernetInterfaceConfigEntry 1.3.6.1.4.1.5504.2.5.41.1.4.1.1 no-access
Table entry for LAN ethernet interface configuration objects.
                       lanEthernetIndex 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.1 unsigned32 no-access
LAN Ethernet Interface Index
                       lanEthernetEnable 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.2 truthvalue read-write
Enables or disables this interface.
                       lanEthernetStatus 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.3 lanethernetstatusvalues read-only
Indicates the status of this interface. Enumeration of: Up NoLink Error Disabled
                       macAddress 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.4 octet string read-only
ASCII representation of the physical address of the interface
                       macAddressControlEnabled 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.5 truthvalue read-only
Indicates whether MAC Address Control is enabled or not on this interface. MAC Address Control limits the clients that connect to those that match a list of allowed MAC addresses specified in InternetGatewayDevice.LANDevice.{i}.LANHostConfigManagement.AllowedMACAddresses.
                       maxBitRate 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.6 lanethernetmaxbitratevalues read-write
The maximum upstream and downstream bit rate available to this connection. Enumeration of: 10 100 1000 Auto
                       duplexMode 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.7 lanethernetduplexmodevalues read-write
The duplex mode available to this connection. Enumeration of: Half Full Auto
                       zhnIfName 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.8 octet string read-only
Ethernet interface name such as eth0, eth1.
                       zhnEthernetPriorityMark 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.9 unsigned32 read-only
802.1P priority value for this ethernet interface. Assigment of priority values is done via the Layer 2 Bridge Marking Table. Therefore, this object is read-only.
                       dot1qPvid 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.10 unsigned32 read-write
Default 802.1Q VLAN ID for this ethernet interface.
                       lanEthernetAlias 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.11 octet string read-only
A descriptive name for this ethernet interface.
                       pauseMode 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.12 lanethernetpausemodevalues read-write
The pause mode available to this connection. Enumeration of: Auto Enable Disable
                       lanEthernetAcl 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.13 lanethernetaclvalues read-write
The access list values available to an ethernet interface. Enumeration of: Disable BlackList WhiteList Unsupported
                       lanEthernetAclRulesNumberofEntries 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.14 unsigned32 read-only
The number of entries in the access list table for this ethernet interface.
                       lanEthernetLanFollowsWan 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.15 truthvalue read-write
Enable or disable this LAN interface based upon the WAN status.
                       lanEthernetIgmpPriorityMark 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.16 unsigned32 read-write
The 802.1P priority value that this LAN interface will assign to ingress untagged IGMP frames.
                       lanEthernetIgmpPvid 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.17 unsigned32 read-write
The VLAN ID that this LAN interface will assign to ingress untagged IGMP frames.
               lanEthIntfStatisticsTable 1.3.6.1.4.1.5504.2.5.41.1.4.2 no-access
Table of LAN ethernet interface statistics objects. This object contains statistics for an Ethernet LAN connection on a CPE device.
                   lanEthIntfStatisticsEntry 1.3.6.1.4.1.5504.2.5.41.1.4.2.1 no-access
Table entry for LAN ethernet interface statistics objects.
                       bytesSent 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.1 gauge32 read-only
Total number of bytes sent over the interface since the CPE was last reset.
                       bytesReceived 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.2 gauge32 read-only
Total number of bytes received over the interface since the CPE was last reset.
                       packetsSent 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.3 gauge32 read-only
Total number of packets sent over the interface since the CPE was last reset.
                       packetsReceived 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.4 gauge32 read-only
Total number of packets received over the interface since the CPE was last reset.
                       txErrors 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.5 gauge32 read-only
Total number of transmit errors on the interface since the CPE was last reset.
                       rxErrors 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.6 gauge32 read-only
Total number of receive errors on the interface since the CPE was last reset.
                       txDrops 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.7 gauge32 read-only
Total number of packets dropped on the transmit side of the interface since the CPE was last reset.
                       rxDrops 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.8 gauge32 read-only
Total number of packets dropped on the receive side of the interface since the CPE was last reset.
               lanEthIntfStatusTable 1.3.6.1.4.1.5504.2.5.41.1.4.3 no-access
Table of LAN ethernet interface status objects. This object models an Ethernet LAN connection on a CPE device. This object must be implemented for all CPEs that contain an Ethernet interface on the LAN side.
                   lanEthIntfStatusEntry 1.3.6.1.4.1.5504.2.5.41.1.4.3.1 no-access
Table entry for LAN ethernet interface status objects.
                       linkStatus 1.3.6.1.4.1.5504.2.5.41.1.4.3.1.1 lanethernetstatusvalues read-only
The port's current link status.
                       rateStatus 1.3.6.1.4.1.5504.2.5.41.1.4.3.1.2 lanethernetmaxbitratevalues read-only
The port's current maximum bit rate.
                       duplexStatus 1.3.6.1.4.1.5504.2.5.41.1.4.3.1.3 lanethernetduplexmodevalues read-only
The port's current duplex mode.
                       pauseStatus 1.3.6.1.4.1.5504.2.5.41.1.4.3.1.4 lanethernetpausemodevalues read-only
The port's current pause mode.
               lanEthIntfRateLimitTable 1.3.6.1.4.1.5504.2.5.41.1.4.4 no-access
Table of LAN ethernet interface configuration objects. This object models an Ethernet LAN connection on a CPE device. This object must be implemented for all CPEs that contain an Ethernet interface on the LAN side.
                   lanEthIntfRateLimitEntry 1.3.6.1.4.1.5504.2.5.41.1.4.4.1 no-access
Rate limit table entry for LAN ethernet interface configuration objects.
                       rateLimitEnable 1.3.6.1.4.1.5504.2.5.41.1.4.4.1.1 truthvalue read-write
This object is used to enable or disable rate limit on a port. Setting it to True will rate limit traffic on the port to a specified peak rate.
                       peakRate 1.3.6.1.4.1.5504.2.5.41.1.4.4.1.2 unsigned32 read-write
This object identifies the maximum rate (0-1000) in Mbps on a port. If Rate Limit is disabled, this object has no effect.
                       burstSize 1.3.6.1.4.1.5504.2.5.41.1.4.4.1.3 lanratelimitburstsizevalues read-write
This object burst size. If Rate Limit is disabled, this object has no effect.
                       rateDirection 1.3.6.1.4.1.5504.2.5.41.1.4.4.1.4 lanratelimitdirectionvalues read-write
This object specifies the traffic direction to which the rate limit applies. The supported values are inbound, outbound or both. If the Rate Limit is disabled, this object has no effect.
                       inboundPeakRate 1.3.6.1.4.1.5504.2.5.41.1.4.4.1.5 unsigned32 read-write
This object identifies the maximum rate (0-1000) in Mbps on a port for inbound data. If Rate Limit is disabled, this object has no effect.
           igmpGroupsTable 1.3.6.1.4.1.5504.2.5.41.1.5 no-access
Table of IGMP Multicast Groups currently detected by IGMP snooping.
               igmpGroupsEntry 1.3.6.1.4.1.5504.2.5.41.1.5.1 no-access
IGMP Multicast Groups table.
                   igmpGroupIndex 1.3.6.1.4.1.5504.2.5.41.1.5.1.1 unsigned32 no-access
IGMP Multicast Groups Table Index
                   igmpGroupAddress 1.3.6.1.4.1.5504.2.5.41.1.5.1.2 ipaddress read-only
This object identifies the IP address of the multicast group.
                   igmpGroupReporterIP 1.3.6.1.4.1.5504.2.5.41.1.5.1.3 ipaddress read-only
This object identifies the IP address of the host in the multicast group.
                   igmpGroupReporterMAC 1.3.6.1.4.1.5504.2.5.41.1.5.1.4 octet string read-only
This object identifies the MAC address of the host in the multicast group.
                   igmpGroupInterface 1.3.6.1.4.1.5504.2.5.41.1.5.1.5 octet string read-only
This object identifies the interface that discovered the multicast group.
                   igmpGroupVlan 1.3.6.1.4.1.5504.2.5.41.1.5.1.6 octet string read-only
This object identifies the VLAN that discovered the multicast group.
                   igmpGroupExpiration 1.3.6.1.4.1.5504.2.5.41.1.5.1.7 unsigned32 read-only
This object identifies the time (in seconds) before the multicast group times out.
                   igmpGroupQuerier 1.3.6.1.4.1.5504.2.5.41.1.5.1.8 ipaddress read-only
This object identifies the IP address to be used by a proxy querier.
           zhnLANDeviceSystemObjects 1.3.6.1.4.1.5504.2.5.41.1.6
               lanDefaultIfName 1.3.6.1.4.1.5504.2.5.41.1.6.1 octet string read-write
Configure the default interface name.
               lanDefaultIfIpAddress 1.3.6.1.4.1.5504.2.5.41.1.6.2 ipaddress read-only
The IP address of the default interface, as configured by IPInterfaceIPAddress.
           lanEthAclRulesTable 1.3.6.1.4.1.5504.2.5.41.1.7 no-access
Table of LAN ethernet access list rules. This table contains a list of all access rules used to filter incoming traffic for a single physical ethernet interface.
               lanEthAclRulesEntry 1.3.6.1.4.1.5504.2.5.41.1.7.1 no-access
Table entry for LAN ethernet access list objects.
                   lanAclRuleKey 1.3.6.1.4.1.5504.2.5.41.1.7.1.1 unsigned32 no-access
Index for the Ethernet Access List table.
                   lanAclRuleIfName 1.3.6.1.4.1.5504.2.5.41.1.7.1.2 octet string read-only
Identify the interface name.
                   lanAclRuleName 1.3.6.1.4.1.5504.2.5.41.1.7.1.3 octet string read-write
The user defined identifier for the rule. When creating a new rule, this field must be provided and must be unique per interface rule.
                   lanAclRuleSourceIPAddress 1.3.6.1.4.1.5504.2.5.41.1.7.1.4 octet string read-write
The Source IP address to filter. The address may include a subnet prefix length in CIDR notation. Therefore the format would be 192.168.2.0/24. This is a ASCII representation of the IP address
                   lanAclRuleIPProtocol 1.3.6.1.4.1.5504.2.5.41.1.7.1.5 lanethernetipprotocolvalues read-write
The IPv4 Protocol to filter.
                   lanAclRuleSourceMACAddress 1.3.6.1.4.1.5504.2.5.41.1.7.1.6 octet string read-write
The Source MAC Address to filter. ASCII representation of the physical address of the interface
                   lanAclRuleSourceMACMask 1.3.6.1.4.1.5504.2.5.41.1.7.1.7 octet string read-write
Mask by which to filter MAC address. For example a MAC Mask of ff:ff:ff:00:00:00 would filter against the first six digits of the MAC address. ASCII representation of the MAC Mask
                   lanAclRuleRowStatus 1.3.6.1.4.1.5504.2.5.41.1.7.1.8 zhonerowstatus read-write
The SNMP RowStatus of the current row. The following object must be specified upon row creation: lanAclRuleName
       zhnLANDeviceConformance 1.3.6.1.4.1.5504.2.5.41.2
           zhnLANDeviceGroups 1.3.6.1.4.1.5504.2.5.41.2.1
               zhnLANDeviceGroup 1.3.6.1.4.1.5504.2.5.41.2.1.1
A collection of Zhone LAN Device objects that describe the LAN interfaces of the device.
               zhnLANIgmpSnoopingGroup 1.3.6.1.4.1.5504.2.5.41.2.1.2
A collection of Zhone LAN Device objects that describe the IGMP snooping capabilities of the device.
               zhnLANHostConfigManagementGroup 1.3.6.1.4.1.5504.2.5.41.2.1.3
A collection of Zhone LAN Host Configuration Management objects that describe the LAN IP addressing of the device.
               zhnIpInterfaceGroup 1.3.6.1.4.1.5504.2.5.41.2.1.4
A collection of Zhone LAN IP Address objects that describe the IP connectivity of interfaces of the device.
               zhnPPPoEConfigGroup 1.3.6.1.4.1.5504.2.5.41.2.1.5
A collection of Zhone LAN PPPoE objects that describe the configuration of PPPoE connections for interfaces of the device.
               zhnPPPoEStatusGroup 1.3.6.1.4.1.5504.2.5.41.2.1.6
A collection of Zhone LAN PPPoE objects that describe the status of PPPoE connections for interfaces of the device.
               zhnLANEthernetInterfaceConfigGroup 1.3.6.1.4.1.5504.2.5.41.2.1.7
A collection of Zhone LAN Ethernet objects that describe the ethernet-like interfaces of the device.
               zhnLANEthIntfStatisticsGroup 1.3.6.1.4.1.5504.2.5.41.2.1.8
A collection of Zhone LAN Ethernet objects that convey statistical information for the ethernet-like interfaces of the device.
               zhnLANEthIntfStatusGroup 1.3.6.1.4.1.5504.2.5.41.2.1.9
A collection of Zhone LAN Ethernet objects that convey the status of the ethernet-like interfaces of the device.
               zhnLANEthIntfRateLimitGroup 1.3.6.1.4.1.5504.2.5.41.2.1.10
A collection of Zhone LAN Ethernet objects that convey the rate-limit information of the ethernet-like interfaces of the device.
               zhnLANIGMPMulticastGroup 1.3.6.1.4.1.5504.2.5.41.2.1.11
A collection of Zhone LAN IGMP objects that identify the multicast groups currently detected by IGMP snooping within the device.
               zhnLANSystemGroup 1.3.6.1.4.1.5504.2.5.41.2.1.12
A collection of Zhone LAN System-wide scalar objects that identify the system default interface.
               zhnLANAclRulesGroup 1.3.6.1.4.1.5504.2.5.41.2.1.13
A collection of Zhone LAN Ethernet interface access-list rules with which to filter incoming traffic.
               zhnDhcpConditionalServingPoolGroup 1.3.6.1.4.1.5504.2.5.41.2.1.14
A collection of configuration parameters for DHCP conditional serving.
           zhnLANDeviceCompliances 1.3.6.1.4.1.5504.2.5.41.2.2
               zhnLANDeviceCompliance 1.3.6.1.4.1.5504.2.5.41.2.2.1
The Compliance statement for SNMP entities which manage the Zhone CPE LAN Device Information