XEDIA-POLICY-MIB: View SNMP OID List / Download MIB

VENDOR: XEDIA CORPORATION


 Home MIB: XEDIA-POLICY-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, XEDIA-REG

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 xediaPolicyMIB 1.3.6.1.4.1.838.3.10
This module defines objects for the management of Routing Policies in Xedia devices.
       xpolicyObjects 1.3.6.1.4.1.838.3.10.1
           xpolicyGeneral 1.3.6.1.4.1.838.3.10.1.1
           xpolicyCounts 1.3.6.1.4.1.838.3.10.1.2
               xpolicyRxCounts 1.3.6.1.4.1.838.3.10.1.2.1
                   xpolicyNumRxConfiguredTotal 1.3.6.1.4.1.838.3.10.1.2.1.1 integer32 read-only
The total number of configured 'receive' policies.
                   xpolicyNumRxConfiguredValid 1.3.6.1.4.1.838.3.10.1.2.1.2 integer32 read-only
Represents the number of configured 'receive' policies that have a RowStatus of 'active'. This means that they are configured correctly without any conflicts among the elements in the row.
                   xpolicyNumRxConfiguredInValid 1.3.6.1.4.1.838.3.10.1.2.1.3 integer32 read-only
Represents the number of configured 'receive' policies that have a RowStatus of 'notReady'. This means that they are configured, but have conflicts among the elements in the row.
                   xpolicyNumRxInUseTotal 1.3.6.1.4.1.838.3.10.1.2.1.4 integer32 read-only
Represents the number of 'receive' policies that are currently being used by the run-time application. Normally this number is the same as the number of Configured Valid Policies.
                   xpolicyNumRxInUseBGP 1.3.6.1.4.1.838.3.10.1.2.1.5 integer32 read-only
Represents the number of BGP 'receive' policies that are currently being used by the run-time application.
                   xpolicyNumRxInUseOSPF 1.3.6.1.4.1.838.3.10.1.2.1.6 integer32 read-only
Represents the number of OSPF 'receive' policies that are currently being used by the run-time application.
                   xpolicyNumRxInUseRIP 1.3.6.1.4.1.838.3.10.1.2.1.7 integer32 read-only
Represents the number of RIP 'receive' policies that are currently being used by the run-time application.
                   xpolicyNumRxInUseStatic 1.3.6.1.4.1.838.3.10.1.2.1.8 integer32 read-only
Represents the number of static 'receive' policies that are currently being used by the run-time application.
               xpolicyTxCounts 1.3.6.1.4.1.838.3.10.1.2.2
                   xpolicyNumTxConfiguredTotal 1.3.6.1.4.1.838.3.10.1.2.2.1 integer32 read-only
The total number of configured 'send' policies.
                   xpolicyNumTxConfiguredValid 1.3.6.1.4.1.838.3.10.1.2.2.2 integer32 read-only
Represents the number of configured 'send' policies that have a RowStatus of 'active'. This means that they are configured correctly without any conflicts among the elements in the row.
                   xpolicyNumTxConfiguredInValid 1.3.6.1.4.1.838.3.10.1.2.2.3 integer32 read-only
Represents the number of configured 'send' policies that have a RowStatus of 'notReady'. This means that they are configured, but have conflicts among the elements in the row.
                   xpolicyNumTxInUseTotal 1.3.6.1.4.1.838.3.10.1.2.2.4 integer32 read-only
Represents the number of 'send' policies that are currently being used by the run-time application. Normally this number is the same as the number of Configured Valid Policies.
                   xpolicyNumTxInUseBGP 1.3.6.1.4.1.838.3.10.1.2.2.5 integer32 read-only
Represents the number of BGP 'send' policies that are currently being used by the run-time application.
                   xpolicyNumTxInUseOSPF 1.3.6.1.4.1.838.3.10.1.2.2.6 integer32 read-only
Represents the number of OSPF 'send' policies that are currently being used by the run-time application.
                   xpolicyNumTxInUseRIP 1.3.6.1.4.1.838.3.10.1.2.2.7 integer32 read-only
Represents the number of RIP 'send' policies that are currently being used by the run-time application.
       xpolicyTables 1.3.6.1.4.1.838.3.10.2
           xpolicyRouting 1.3.6.1.4.1.838.3.10.2.1
               xpolicyReceiveTable 1.3.6.1.4.1.838.3.10.2.1.1 no-access
This entity's Route Policy Receive table.
                   xpolicyReceiveEntry 1.3.6.1.4.1.838.3.10.2.1.1.1 no-access
An entry to the Route Policy Receive Table.
                       xpolicyRxProtocol 1.3.6.1.4.1.838.3.10.2.1.1.1.1 integer read-only
The protocol from which the update was received. Enumeration: 'bgp': 1, 'ospf': 2, 'rip': 3.
                       xpolicyRxPeer 1.3.6.1.4.1.838.3.10.2.1.1.1.2 ipaddress read-only
The destination IP address of the routing update. If it is zero, then all peers are accepted.
                       xpolicyRxName 1.3.6.1.4.1.838.3.10.2.1.1.1.3 xpolicyname read-only
A unique name for this entry, including the optional priority number, which can be represented in dotted notation. When used, the priority numbers allow hiearchical matching. Format of the string is: . Examples of strings: name, name.1, name.1.1, name.2
                       xpolicyRxAddrStart 1.3.6.1.4.1.838.3.10.2.1.1.1.4 ipaddress read-only
The base of the IP Address range to match in routing update destinations.
                       xpolicyRxAddrEnd 1.3.6.1.4.1.838.3.10.2.1.1.1.5 ipaddress read-only
The end of the IP Address range to match in routing update destinations.
                       xpolicyRxAsString 1.3.6.1.4.1.838.3.10.2.1.1.1.6 xpolicyasstring read-only
A string describing a complete, or partial 'Autonomyous System' inwhich to perform matches. This string uses a limited form of regular expression syntax to define what values of an AS path to match. The special characters used are '^' and '$' to specify 'start' and 'end' respectively. 100 - a path with 100 in it ^100$ - exactly the path of 100 (adjacent AS) ^100 - any path starting with 100 100$ - any path ending with 100 100.200 - a path with the sequence 100.200 in it. note: this is only valid for routes sourced from BGP.
                       xpolicyRxCommunityId 1.3.6.1.4.1.838.3.10.2.1.1.1.7 integer read-only
Allows matching on one of the integers listed in the community attrubute list. This is only valid for routes sourced from BGP.
                       xpolicyRxReceiveOption 1.3.6.1.4.1.838.3.10.2.1.1.1.8 integer read-only
Receive action/options taken on 'matching' entries. Enumeration: 'ignore': 1, 'receive': 2, 'drop': 3.
                       xpolicyRxLocalPref 1.3.6.1.4.1.838.3.10.2.1.1.1.9 integer32 read-only
A positive four byte integer defining the preference to a matched routes. Higher values assign greater preference. Internal routes use 0xffffffff. note: It is only used for BGP.
                       xpolicyRxRowStatus 1.3.6.1.4.1.838.3.10.2.1.1.1.10 rowstatus read-only
This object is used to add and remove entries from the table.
                       xpolicyRxPrefixMin 1.3.6.1.4.1.838.3.10.2.1.1.1.11 integer read-only
Minimum length of IP Address prefix to match in routing update destinations.
                       xpolicyRxPrefixMax 1.3.6.1.4.1.838.3.10.2.1.1.1.12 integer read-only
Maximum length of IP Address prefix to match in routing update destinations.
               xpolicySendTable 1.3.6.1.4.1.838.3.10.2.1.2 no-access
This entity's Route Policy Send table.
                   xpolicySendEntry 1.3.6.1.4.1.838.3.10.2.1.2.1 no-access
An entry to the Route Policy Table.
                       xpolicyTxProtocol 1.3.6.1.4.1.838.3.10.2.1.2.1.1 integer read-only
The protocol identifying where the update will be sent. Enumeration: 'bgp': 1, 'ospf': 2, 'rip': 3.
                       xpolicyTxPeer 1.3.6.1.4.1.838.3.10.2.1.2.1.2 ipaddress read-only
The destination IP address of the routing update. If zero, then all peers receive them. For OSPF and RIP, this value should be zero. BGP should not use 0.
                       xpolicyTxName 1.3.6.1.4.1.838.3.10.2.1.2.1.3 xpolicyname read-only
A unique name for this entry, including the optional priority number, which can be represented in dotted notation. When used, the priority numbers allow hiearchical matching. Format of the string is: . Examples of strings: name, name.1, name.1.1, name.2
                       xpolicyTxSrcProtocol 1.3.6.1.4.1.838.3.10.2.1.2.1.4 integer read-only
The protocol identifying the origin of the update. Often this 'src protocol will be the same as the TX Protocol index. This allows routes learned by BGP to be filtered towards other BGP routes. Enumeration: 'bgp': 1, 'local': 4, 'static': 5, 'ospf': 2, 'rip': 3.
                       xpolicyTxSrcProtSubType 1.3.6.1.4.1.838.3.10.2.1.2.1.5 integer read-only
The protocol sub-type discription. Currently, this only applies to OSPF entries. Enumeration: 'internal': 2, 'any': 1, 'external': 3.
                       xpolicyTxAddrStart 1.3.6.1.4.1.838.3.10.2.1.2.1.6 ipaddress read-only
The base of the IP Address range to match in routing update destinations.
                       xpolicyTxAddrEnd 1.3.6.1.4.1.838.3.10.2.1.2.1.7 ipaddress read-only
The end of the IP Address range to match in routing update destinations.
                       xpolicyTxAsString 1.3.6.1.4.1.838.3.10.2.1.2.1.8 xpolicyasstring read-only
A string describing a complete, or partial 'Autonomyous System' inwhich to perform matches. This string uses a limited form of regular expression syntax to define what values of an AS path to match. The special characters used are '^' and '$' to specify 'start' and 'end' respectively. 100 - a path with 100 in it ^100$ - exactly the path of 100 (adjacent AS) ^100 - any path starting with 100 100$ - any path ending with 100 100.200 - a path with the sequence 100.200 in it. note: this is only valid for routes sourced from BGP.
                       xpolicyTxCommunityId 1.3.6.1.4.1.838.3.10.2.1.2.1.9 integer read-only
Allows matching on one of the integers listed in the community attrubute list. This is only valid for routes sourced from BGP.
                       xpolicyTxSendOption 1.3.6.1.4.1.838.3.10.2.1.2.1.10 integer read-only
Send action/options taken on 'matching' entries. Never, indicates that routes within the range are not sent to the peer. Normal, allows routes within the specified range to be sent to the peer. Aggregate adds the specified range to routes that are currently within the specified range. In the aggregate case, the range must be a power of two. Enumeration: 'ignore': 1, 'aggregate': 4, 'never': 2, 'normal': 3.
                       xpolicyTxMED 1.3.6.1.4.1.838.3.10.2.1.2.1.11 integer32 read-only
The 'Multi-Exit-Descriminator'. A lower value assigns a higher preference to the route. Normally, the MED attribute ia attached to all matched routes. Except in the case of 0xffffffff, which means the MED will not be sent. note: It is only used for BGP. If it is used (>0), then the 'xpolicyTxSendOption' can NOT be set to 'never'.
                       xpolicyTxMEDAuto 1.3.6.1.4.1.838.3.10.2.1.2.1.12 integer read-only
Admininstative status for calculating the 'Multi-Exit-Descriminator' using IGP_metric + 1. Enumeration: 'on': 1, 'off': 2.
                       xpolicyTxAsPrepend 1.3.6.1.4.1.838.3.10.2.1.2.1.13 integer32 read-only
The number of times to prepend the router's AS to the transmitted AS path in updates to the peer for all matching routes. note: It is only used for BGP. If it is used (>0), then the 'xpolicyTxSendOption' can NOT be set to 'never'.
                       xpolicyTxSendCommunityId 1.3.6.1.4.1.838.3.10.2.1.2.1.14 integer read-only
The value that is added to the community attribute for all matched routes. note: It is only used for BGP. If it is used (>0), then the 'xpolicyTxSendOption' can NOT be set to 'never'.
                       xpolicyTxIgpMetric 1.3.6.1.4.1.838.3.10.2.1.2.1.15 integer32 read-only
The metric used for IGP.
                       xpolicyTxIgpMetricType 1.3.6.1.4.1.838.3.10.2.1.2.1.16 integer read-only
Type of metric being used. Currently, only for defining OSPF internal and external routes. Enumeration: 'ospfExtType2': 2, 'ospfExtType1': 1.
                       xpolicyTxIgpMetricAuto 1.3.6.1.4.1.838.3.10.2.1.2.1.17 integer read-only
Administrative status for generating an 'auto' metric. If set to localPref, the igp's metric is igpMetric - localPref. If set to MED, the the igp's metric is igpMetric + MED. If set to igp, then the entry controls routes imported from one IGP to another. Enumeration: 'med': 3, 'localPref': 2, 'off': 1, 'igp': 4.
                       xpolicyTxNextHopSelf 1.3.6.1.4.1.838.3.10.2.1.2.1.18 truthvalue read-only
Setting this object to the value 'true(1)' will set the BGP NEXT_HOP attribute to the local router address instead of leaving it as it was received from an EBGP peer.
                       xpolicyTxRowStatus 1.3.6.1.4.1.838.3.10.2.1.2.1.19 rowstatus read-only
This object is used to add and remove entries from the table.
                       xpolicyTxPrefixMin 1.3.6.1.4.1.838.3.10.2.1.2.1.20 integer read-only
Minimum length of IP Address prefix to match in routing update destinations.
                       xpolicyTxPrefixMax 1.3.6.1.4.1.838.3.10.2.1.2.1.21 integer read-only
Maximum length of IP Address prefix to match in routing update destinations.
           xpolicyDisplayTable 1.3.6.1.4.1.838.3.10.2.2 no-access
This table contains a read-only display of the internally linked list of policy entries.
               xpolicyDisplayEntry 1.3.6.1.4.1.838.3.10.2.2.1 no-access
Individual piece of text information regarding a policy entry.
                   xpolicyDisplayIndex 1.3.6.1.4.1.838.3.10.2.2.1.1 integer32 no-access
The row number in the table.
                   xpolicyRxDisplayString 1.3.6.1.4.1.838.3.10.2.2.1.2 displaystring read-only
A single text line of information about a particular Receive policy.
                   xpolicyTxDisplayString 1.3.6.1.4.1.838.3.10.2.2.1.3 displaystring read-only
A single text line of information about a particular Send policy.
           xpolicyPeerGroupTable 1.3.6.1.4.1.838.3.10.2.3 no-access
This table contains configuration for policy peer group members.
               xpolicyPeerGroupEntry 1.3.6.1.4.1.838.3.10.2.3.1 no-access
Individual peer group configuration.
                   xpolicyPeerGroupIndex 1.3.6.1.4.1.838.3.10.2.3.1.1 integer read-only
The index used to identify this peer group.
                   xpolicyPeerGroupPeer 1.3.6.1.4.1.838.3.10.2.3.1.2 ipaddress read-only
The peer contained in this group.
                   xpolicyPeerGroupRowStatus 1.3.6.1.4.1.838.3.10.2.3.1.3 rowstatus read-only
This object is used to add and remove entries from the table.
           xpolicyPriRouting 1.3.6.1.4.1.838.3.10.2.4
               xpolicyPriReceiveTable 1.3.6.1.4.1.838.3.10.2.4.1 no-access
This entity's Route Policy Receive table.
                   xpolicyPriReceiveEntry 1.3.6.1.4.1.838.3.10.2.4.1.1 no-access
An entry to the Route Policy Receive Table.
                       xpolicyPriRxProtocol 1.3.6.1.4.1.838.3.10.2.4.1.1.1 integer read-only
The protocol from which the update was received. Enumeration: 'bgp': 1, 'static': 5, 'ospf': 2, 'rip': 3.
                       xpolicyPriRxPeer 1.3.6.1.4.1.838.3.10.2.4.1.1.2 ipaddress read-only
The destination IP address of the routing update. If it is zero, then all peers are accepted.
                       xpolicyPriRxName 1.3.6.1.4.1.838.3.10.2.4.1.1.3 xpripolicyname read-only
A unique name for this entry, including the optional priority number, which can be represented in dotted notation. When used, the priority numbers allow hiearchical matching. Format of the string is: . Examples of strings: name, name.1, name.1.1, name.2
                       xpolicyPriRxAddrStart 1.3.6.1.4.1.838.3.10.2.4.1.1.4 ipaddress read-only
The base of the IP Address range to match in routing update destinations.
                       xpolicyPriRxAddrEnd 1.3.6.1.4.1.838.3.10.2.4.1.1.5 ipaddress read-only
The end of the IP Address range to match in routing update destinations.
                       xpolicyPriRxAsString 1.3.6.1.4.1.838.3.10.2.4.1.1.6 xpolicyasstring read-only
A string describing a complete, or partial 'Autonomyous System' inwhich to perform matches. This string uses a limited form of regular expression syntax to define what values of an AS path to match. The special characters used are '^' and '$' to specify 'start' and 'end' respectively. 100 - a path with 100 in it ^100$ - exactly the path of 100 (adjacent AS) ^100 - any path starting with 100 100$ - any path ending with 100 100.200 - a path with the sequence 100.200 in it. note: this is only valid for routes sourced from BGP.
                       xpolicyPriRxCommunityId 1.3.6.1.4.1.838.3.10.2.4.1.1.7 integer read-only
Allows matching on one of the integers listed in the community attrubute list. This is only valid for routes sourced from BGP.
                       xpolicyPriRxReceiveOption 1.3.6.1.4.1.838.3.10.2.4.1.1.8 integer read-only
Receive action/options taken on 'matching' entries. Enumeration: 'ignore': 1, 'receive': 2, 'drop': 3.
                       xpolicyPriRxLocalPref 1.3.6.1.4.1.838.3.10.2.4.1.1.9 integer32 read-only
A positive four byte integer defining the preference to a matched routes. Higher values assign greater preference. Internal routes use 0xffffffff. note: It is only used for BGP.
                       xpolicyPriRxRowStatus 1.3.6.1.4.1.838.3.10.2.4.1.1.10 rowstatus read-only
This object is used to add and remove entries from the table.
                       xpolicyPriRxPrefixMin 1.3.6.1.4.1.838.3.10.2.4.1.1.11 integer read-only
Minimum length of IP Address prefix to match in routing update destinations.
                       xpolicyPriRxPrefixMax 1.3.6.1.4.1.838.3.10.2.4.1.1.12 integer read-only
Maximum length of IP Address prefix to match in routing update destinations.
                       xpolicyPriRxDistance 1.3.6.1.4.1.838.3.10.2.4.1.1.13 integer read-only
Administrative distance value to be set to a matched route.
               xpolicyPriSendTable 1.3.6.1.4.1.838.3.10.2.4.2 no-access
This entity's Route Policy Send table.
                   xpolicyPriSendEntry 1.3.6.1.4.1.838.3.10.2.4.2.1 no-access
An entry to the Route Policy Table.
                       xpolicyPriTxProtocol 1.3.6.1.4.1.838.3.10.2.4.2.1.1 integer read-only
The protocol identifying where the update will be sent. Enumeration: 'bgp': 1, 'ospf': 2, 'rip': 3.
                       xpolicyPriTxPeer 1.3.6.1.4.1.838.3.10.2.4.2.1.2 ipaddress read-only
The destination IP address of the routing update. If zero, then all peers receive them. For OSPF and RIP, this value should be zero. BGP should not use 0.
                       xpolicyPriTxName 1.3.6.1.4.1.838.3.10.2.4.2.1.3 xpripolicyname read-only
A unique name for this entry, including the optional priority number, which can be represented in dotted notation. When used, the priority numbers allow hiearchical matching. Format of the string is: . Examples of strings: name, name.1, name.1.1, name.2
                       xpolicyPriTxSrcProtocol 1.3.6.1.4.1.838.3.10.2.4.2.1.4 integer read-only
The protocol identifying the origin of the update. Often this 'src protocol will be the same as the TX Protocol index. This allows routes learned by BGP to be filtered towards other BGP routes. Enumeration: 'bgp': 1, 'local': 4, 'static': 5, 'ospf': 2, 'rip': 3.
                       xpolicyPriTxSrcProtSubType 1.3.6.1.4.1.838.3.10.2.4.2.1.5 integer read-only
The protocol sub-type discription. Currently, this only applies to OSPF entries. Enumeration: 'internal': 2, 'any': 1, 'external': 3.
                       xpolicyPriTxAddrStart 1.3.6.1.4.1.838.3.10.2.4.2.1.6 ipaddress read-only
The base of the IP Address range to match in routing update destinations.
                       xpolicyPriTxAddrEnd 1.3.6.1.4.1.838.3.10.2.4.2.1.7 ipaddress read-only
The end of the IP Address range to match in routing update destinations.
                       xpolicyPriTxAsString 1.3.6.1.4.1.838.3.10.2.4.2.1.8 xpolicyasstring read-only
A string describing a complete, or partial 'Autonomyous System' inwhich to perform matches. This string uses a limited form of regular expression syntax to define what values of an AS path to match. The special characters used are '^' and '$' to specify 'start' and 'end' respectively. 100 - a path with 100 in it ^100$ - exactly the path of 100 (adjacent AS) ^100 - any path starting with 100 100$ - any path ending with 100 100.200 - a path with the sequence 100.200 in it. note: this is only valid for routes sourced from BGP.
                       xpolicyPriTxCommunityId 1.3.6.1.4.1.838.3.10.2.4.2.1.9 integer read-only
Allows matching on one of the integers listed in the community attrubute list. This is only valid for routes sourced from BGP.
                       xpolicyPriTxSendOption 1.3.6.1.4.1.838.3.10.2.4.2.1.10 integer read-only
Send action/options taken on 'matching' entries. Never, indicates that routes within the range are not sent to the peer. Normal, allows routes within the specified range to be sent to the peer. Aggregate adds the specified range to routes that are currently within the specified range. In the aggregate case, the range must be a power of two. Enumeration: 'ignore': 1, 'aggregate': 4, 'never': 2, 'normal': 3.
                       xpolicyPriTxMED 1.3.6.1.4.1.838.3.10.2.4.2.1.11 integer32 read-only
The 'Multi-Exit-Descriminator'. A lower value assigns a higher preference to the route. Normally, the MED attribute ia attached to all matched routes. Except in the case of 0xffffffff, which means the MED will not be sent. note: It is only used for BGP. If it is used (>0), then the 'xpolicyTxSendOption' can NOT be set to 'never'.
                       xpolicyPriTxMEDAuto 1.3.6.1.4.1.838.3.10.2.4.2.1.12 integer read-only
Admininstative status for calculating the 'Multi-Exit-Descriminator' using IGP_metric + 1. Enumeration: 'on': 1, 'off': 2.
                       xpolicyPriTxAsPrepend 1.3.6.1.4.1.838.3.10.2.4.2.1.13 integer32 read-only
The number of times to prepend the router's AS to the transmitted AS path in updates to the peer for all matching routes. note: It is only used for BGP. If it is used (>0), then the 'xpolicyTxSendOption' can NOT be set to 'never'.
                       xpolicyPriTxSendCommunityId 1.3.6.1.4.1.838.3.10.2.4.2.1.14 integer read-only
The value that is added to the community attribute for all matched routes. note: It is only used for BGP. If it is used (>0), then the 'xpolicyTxSendOption' can NOT be set to 'never'.
                       xpolicyPriTxIgpMetric 1.3.6.1.4.1.838.3.10.2.4.2.1.15 integer32 read-only
The metric used for IGP.
                       xpolicyPriTxIgpMetricType 1.3.6.1.4.1.838.3.10.2.4.2.1.16 integer read-only
Type of metric being used. Currently, only for defining OSPF internal and external routes. Enumeration: 'ospfExtType2': 2, 'ospfExtType1': 1.
                       xpolicyPriTxIgpMetricAuto 1.3.6.1.4.1.838.3.10.2.4.2.1.17 integer read-only
Administrative status for generating an 'auto' metric. If set to localPref, the igp's metric is igpMetric - localPref. If set to MED, the the igp's metric is igpMetric + MED. If set to igp, then the entry controls routes imported from one IGP to another. Enumeration: 'med': 3, 'localPref': 2, 'off': 1, 'igp': 4.
                       xpolicyPriTxNextHopSelf 1.3.6.1.4.1.838.3.10.2.4.2.1.18 truthvalue read-only
Setting this object to the value 'true(1)' will set the BGP NEXT_HOP attribute to the local router address instead of leaving it as it was received from an EBGP peer.
                       xpolicyPriTxRowStatus 1.3.6.1.4.1.838.3.10.2.4.2.1.19 rowstatus read-only
This object is used to add and remove entries from the table.
                       xpolicyPriTxPrefixMin 1.3.6.1.4.1.838.3.10.2.4.2.1.20 integer read-only
Minimum length of IP Address prefix to match in routing update destinations.
                       xpolicyPriTxPrefixMax 1.3.6.1.4.1.838.3.10.2.4.2.1.21 integer read-only
Maximum length of IP Address prefix to match in routing update destinations.
       xpolicyConformance 1.3.6.1.4.1.838.3.10.3
           xpolicyCompliances 1.3.6.1.4.1.838.3.10.3.1
               xpolicyCompliance 1.3.6.1.4.1.838.3.10.3.1.1
The compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB.
           xpolicyGroups 1.3.6.1.4.1.838.3.10.3.2
               xpolicyAllGroup 1.3.6.1.4.1.838.3.10.3.2.1
The set of all accessible objects in this MIB.