Wellfleet-X25PAD-MIB: View SNMP OID List / Download MIB

VENDOR: WELLFLEET


 Home MIB: Wellfleet-X25PAD-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Wellfleet-COMMON-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wfX25PadDefaultCfgTable 1.3.6.1.4.1.18.3.5.9.12.1 no-access
Table of X25 PAD Config Objects
     wfX25PadDefaultCfgEntry 1.3.6.1.4.1.18.3.5.9.12.1.1 no-access
An entry in the X25 Pad Config Table
         wfX25PadDefaultCfgDelete 1.3.6.1.4.1.18.3.5.9.12.1.1.1 integer read-write
Create/Delete parameter Enumeration: 'deleted': 2, 'created': 1.
         wfX25PadDefaultCfgDisable 1.3.6.1.4.1.18.3.5.9.12.1.1.2 integer read-write
Enable/Disable parameter Enumeration: 'disabled': 2, 'enabled': 1.
         wfX25PadDefaultCfgState 1.3.6.1.4.1.18.3.5.9.12.1.1.3 integer read-only
Current state of X.25 PAD sofware on the I-SDB Enumeration: 'down': 2, 'init': 3, 'up': 1.
         wfX25PadDefaultCfgSlot 1.3.6.1.4.1.18.3.5.9.12.1.1.4 integer read-only
Instance ID Slot, filled in by ISDB mib gate
         wfX25PadDefaultCfgConnector 1.3.6.1.4.1.18.3.5.9.12.1.1.5 integer read-only
Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot.
         wfX25PadDefaultCfgCircuit 1.3.6.1.4.1.18.3.5.9.12.1.1.6 integer read-only
Circuit number, filled in by ISDB mib gate
         wfX25PadDefaultCfgX121Addr 1.3.6.1.4.1.18.3.5.9.12.1.1.7 displaystring read-write
X.121 address of the X.25 Pad
         wfX25PadDefaultCfgDNIC 1.3.6.1.4.1.18.3.5.9.12.1.1.8 displaystring read-write
Data Network Identification Code
         wfX25PadDefaultCfgLenSubAddress 1.3.6.1.4.1.18.3.5.9.12.1.1.9 integer read-write
Length of X.121 subaddress
         wfX25PadDefaultCfgLCNLow 1.3.6.1.4.1.18.3.5.9.12.1.1.10 integer read-write
Lower range for logical channel numbers
         wfX25PadDefaultCfgLCNHigh 1.3.6.1.4.1.18.3.5.9.12.1.1.11 integer read-write
Upper range for logical channel numbers
 wfX25PadCurrentCfgTable 1.3.6.1.4.1.18.3.5.9.12.2 no-access
Table of X25 PAD Config Objects
     wfX25PadCurrentCfgEntry 1.3.6.1.4.1.18.3.5.9.12.2.1 no-access
An entry in the X25 Pad Config Table
         wfX25PadCurrentCfgState 1.3.6.1.4.1.18.3.5.9.12.2.1.1 integer read-only
Current state of X.25 PAD sofware on the I-SDB Enumeration: 'down': 2, 'init': 3, 'up': 1.
         wfX25PadCurrentCfgSlot 1.3.6.1.4.1.18.3.5.9.12.2.1.2 integer read-only
Instance ID Slot, filled in by ISDB mib gate
         wfX25PadCurrentCfgConnector 1.3.6.1.4.1.18.3.5.9.12.2.1.3 integer read-only
Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot.
         wfX25PadCurrentCfgCircuit 1.3.6.1.4.1.18.3.5.9.12.2.1.4 integer read-only
Circuit number, filled in by ISDB mib gate
         wfX25PadCurrentCfgX121Addr 1.3.6.1.4.1.18.3.5.9.12.2.1.5 displaystring read-only
X.121 address of the X.25 Pad
         wfX25PadCurrentCfgDNIC 1.3.6.1.4.1.18.3.5.9.12.2.1.6 displaystring read-only
Data Network Identification Code
         wfX25PadCurrentCfgLenSubAddress 1.3.6.1.4.1.18.3.5.9.12.2.1.7 integer read-only
Length of X.121 subaddress
         wfX25PadCurrentCfgLCNLow 1.3.6.1.4.1.18.3.5.9.12.2.1.8 integer read-only
Lower range for logical channel numbers
         wfX25PadCurrentCfgLCNHigh 1.3.6.1.4.1.18.3.5.9.12.2.1.9 integer read-only
Upper range for logical channel numbers
 wfX25PadStatTable 1.3.6.1.4.1.18.3.5.9.12.3 no-access
Table of X25 PAD Stat Objects
     wfX25PadStatEntry 1.3.6.1.4.1.18.3.5.9.12.3.1 no-access
An entry in the X25 Pad Config Table
         wfX25PadStatState 1.3.6.1.4.1.18.3.5.9.12.3.1.1 integer read-only
Current state of X.25 PAD sofware on the I-SDB Enumeration: 'down': 2, 'init': 3, 'up': 1.
         wfX25PadStatSlot 1.3.6.1.4.1.18.3.5.9.12.3.1.2 integer read-only
Instance ID Slot, filled in by ISDB mib gate
         wfX25PadStatConnector 1.3.6.1.4.1.18.3.5.9.12.3.1.3 integer read-only
Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot.
         wfX25PadStatTotalConnCount 1.3.6.1.4.1.18.3.5.9.12.3.1.4 counter read-only
Total number of connections made to the X.25 Pad
         wfX25PadStatRxRR 1.3.6.1.4.1.18.3.5.9.12.3.1.5 counter read-only
Number of receiver ready packets received
         wfX25PadStatTxRR 1.3.6.1.4.1.18.3.5.9.12.3.1.6 counter read-only
Number of receiver ready packets transmitted
         wfX25PadStatRxRNR 1.3.6.1.4.1.18.3.5.9.12.3.1.7 counter read-only
Number of receiver not ready packets received
         wfX25PadStatTxRNR 1.3.6.1.4.1.18.3.5.9.12.3.1.8 counter read-only
Number of receiver not ready packets transmitted
         wfX25PadStatRxRestart 1.3.6.1.4.1.18.3.5.9.12.3.1.9 counter read-only
Number of restart packets received
         wfX25PadStatTxRestart 1.3.6.1.4.1.18.3.5.9.12.3.1.10 counter read-only
Number of restart packets transmitted
 wfX25PadPortDefaultCfgTable 1.3.6.1.4.1.18.3.5.9.12.4 no-access
Table of X25 PAD Port Config Objects
     wfX25PadPortDefaultCfgEntry 1.3.6.1.4.1.18.3.5.9.12.4.1 no-access
An entry in the X25 Pad Port Config Table
         wfX25PadPortDefaultCfgDelete 1.3.6.1.4.1.18.3.5.9.12.4.1.1 integer read-write
Create/Delete parameter Enumeration: 'deleted': 2, 'created': 1.
         wfX25PadPortDefaultCfgDisable 1.3.6.1.4.1.18.3.5.9.12.4.1.2 integer read-write
Enable/Disable parameter Enumeration: 'disabled': 2, 'enabled': 1.
         wfX25PadPortDefaultCfgState 1.3.6.1.4.1.18.3.5.9.12.4.1.3 integer read-only
Current state of X.25 PAD sofware on the I-SDB Enumeration: 'down': 2, 'init': 3, 'up': 1.
         wfX25PadPortDefaultCfgSlot 1.3.6.1.4.1.18.3.5.9.12.4.1.4 integer read-only
Instance ID Slot, filled in by ISDB mib gate
         wfX25PadPortDefaultCfgConnector 1.3.6.1.4.1.18.3.5.9.12.4.1.5 integer read-only
Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot.
         wfX25PadPortDefaultCfgNumber 1.3.6.1.4.1.18.3.5.9.12.4.1.6 integer read-only
Instance ID Async Port, filled in by ISDB mib gate
         wfX25PadPortDefaultCfgSubAddress 1.3.6.1.4.1.18.3.5.9.12.4.1.7 displaystring read-write
Subaddress portion of an X.121 address that is used by an application and is transparent to the network
         wfX25PadPortDefaultCfgLenSubAddress 1.3.6.1.4.1.18.3.5.9.12.4.1.8 integer read-write
Size of the Subaddress portion of an X.121 address
         wfX25PadPortDefaultCfgX3escape 1.3.6.1.4.1.18.3.5.9.12.4.1.9 integer read-write
PAD recall using a character
         wfX25PadPortDefaultCfgX3echo 1.3.6.1.4.1.18.3.5.9.12.4.1.10 integer read-write
PAD echo
         wfX25PadPortDefaultCfgX3forward 1.3.6.1.4.1.18.3.5.9.12.4.1.11 integer read-write
Selection of the data forwarding characters
         wfX25PadPortDefaultCfgX3idle 1.3.6.1.4.1.18.3.5.9.12.4.1.12 integer read-write
Selection of the idle timer delay
         wfX25PadPortDefaultCfgX3device 1.3.6.1.4.1.18.3.5.9.12.4.1.13 integer read-write
Ancillary device control
         wfX25PadPortDefaultCfgX3signals 1.3.6.1.4.1.18.3.5.9.12.4.1.14 integer read-write
Control of PAD service signals
         wfX25PadPortDefaultCfgX3break 1.3.6.1.4.1.18.3.5.9.12.4.1.15 integer read-write
Selection of operation of the PAD on receipt of the break signal
         wfX25PadPortDefaultCfgX3discard 1.3.6.1.4.1.18.3.5.9.12.4.1.16 integer read-write
Discard output
         wfX25PadPortDefaultCfgX3CRpad 1.3.6.1.4.1.18.3.5.9.12.4.1.17 integer read-write
Padding after carriage return
         wfX25PadPortDefaultCfgX3folding 1.3.6.1.4.1.18.3.5.9.12.4.1.18 integer read-write
Line folding
         wfX25PadPortDefaultCfgX3speed 1.3.6.1.4.1.18.3.5.9.12.4.1.19 integer read-write
Binary speed
         wfX25PadPortDefaultCfgX3flow 1.3.6.1.4.1.18.3.5.9.12.4.1.20 integer read-write
Flow Control of the PAD by the start-stop mode DTE
         wfX25PadPortDefaultCfgX3LFinsert 1.3.6.1.4.1.18.3.5.9.12.4.1.21 integer read-write
Linefeed insertion after carriage return
         wfX25PadPortDefaultCfgX3LFpad 1.3.6.1.4.1.18.3.5.9.12.4.1.22 integer read-write
Linefeed padding
         wfX25PadPortDefaultCfgX3Edit 1.3.6.1.4.1.18.3.5.9.12.4.1.23 integer read-write
Editing
         wfX25PadPortDefaultCfgX3Cdelete 1.3.6.1.4.1.18.3.5.9.12.4.1.24 integer read-write
Character delete
         wfX25PadPortDefaultCfgX3Ldelete 1.3.6.1.4.1.18.3.5.9.12.4.1.25 integer read-write
Line delete
         wfX25PadPortDefaultCfgX3Ldisplay 1.3.6.1.4.1.18.3.5.9.12.4.1.26 integer read-write
Line display
         wfX25PadPortDefaultCfgX3Esignals 1.3.6.1.4.1.18.3.5.9.12.4.1.27 integer read-write
Editing PAD service signals
         wfX25PadPortDefaultCfgX3Mask 1.3.6.1.4.1.18.3.5.9.12.4.1.28 integer read-write
Echo mask
         wfX25PadPortDefaultCfgX3parity 1.3.6.1.4.1.18.3.5.9.12.4.1.29 integer read-write
Parity treatment
         wfX25PadPortDefaultCfgX3page 1.3.6.1.4.1.18.3.5.9.12.4.1.30 integer read-write
Page wait
         wfX25PadPortDefaultCfgLenUserData 1.3.6.1.4.1.18.3.5.9.12.4.1.31 integer read-write
Length of the user defined data
         wfX25PadPortDefaultCfgUserData 1.3.6.1.4.1.18.3.5.9.12.4.1.32 octet string read-write
User defined data field represented in hexadecimal
         wfX25PadPortDefaultCfgLenRawFacilities 1.3.6.1.4.1.18.3.5.9.12.4.1.33 integer read-write
Length of the user defined facilities
         wfX25PadPortDefaultCfgRawFacilitiesData 1.3.6.1.4.1.18.3.5.9.12.4.1.34 octet string read-write
User defined facilities filed represented in hexadecimal
         wfX25PadPortDefaultCfgReverseCharge 1.3.6.1.4.1.18.3.5.9.12.4.1.35 octet string read-write
If subscribed to, authorizes the DCE to transmit to the DTE incoming calls which request the reverse charging facility. In absence of this facility the DCE will not transmit to the DTE incoming calls which request the reverse charging facility.
         wfX25PadPortDefaultCfgThruClassNegotiation 1.3.6.1.4.1.18.3.5.9.12.4.1.36 octet string read-write
This facility, if subscribed to, allows negotiation on a per call basis of the throughput classes. The throughput classes are considered independently for each direction of data transmission.
         wfX25PadPortDefaultCfgPacketSizeNegotiation 1.3.6.1.4.1.18.3.5.9.12.4.1.37 octet string read-write
This facility, if subscribed to, will cause the DTE to request packet sizes for both directions of data transmission
         wfX25PadPortDefaultCfgWindowSizeNegotiation 1.3.6.1.4.1.18.3.5.9.12.4.1.38 octet string read-write
This facility, if subscribed to, will cause the DTE to request window sizes for both directions of data transmission
         wfX25PadPortDefaultCfgIntervalTimer 1.3.6.1.4.1.18.3.5.9.12.4.1.39 integer read-write
Time (where 1 equals 10 milliseconds) that the X.25 PAD will wait before forwarding packets with characters in them
         wfX25PadPortDefaultCfgFullAddressing 1.3.6.1.4.1.18.3.5.9.12.4.1.40 integer read-write
Determines whether calling addresses should be included or not Enumeration: 'disabled': 2, 'enabled': 1.
 wfX25PadPortCurrentCfgTable 1.3.6.1.4.1.18.3.5.9.12.5 no-access
Table of X25 PAD Port Config Objects
     wfX25PadPortCurrentCfgEntry 1.3.6.1.4.1.18.3.5.9.12.5.1 no-access
An entry in the X25 Pad Port Config Table
         wfX25PadPortCurrentCfgState 1.3.6.1.4.1.18.3.5.9.12.5.1.1 integer read-only
Current state of X.25 PAD sofware on the I-SDB Enumeration: 'down': 2, 'init': 3, 'up': 1.
         wfX25PadPortCurrentCfgSlot 1.3.6.1.4.1.18.3.5.9.12.5.1.2 integer read-only
Instance ID Slot, filled in by ISDB mib gate
         wfX25PadPortCurrentCfgConnector 1.3.6.1.4.1.18.3.5.9.12.5.1.3 integer read-only
Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot.
         wfX25PadPortCurrentCfgNumber 1.3.6.1.4.1.18.3.5.9.12.5.1.4 integer read-only
Instance ID Async Port, filled in by ISDB mib gate
         wfX25PadPortCurrentCfgSubAddress 1.3.6.1.4.1.18.3.5.9.12.5.1.5 displaystring read-only
Subaddress portion of an X.121 address that is used by an application and is transparent to the network
         wfX25PadPortCurrentCfgLenSubAddress 1.3.6.1.4.1.18.3.5.9.12.5.1.6 integer read-only
Size of the Subaddress portion of an X.121 address
         wfX25PadPortCurrentCfgX3escape 1.3.6.1.4.1.18.3.5.9.12.5.1.7 integer read-only
PAD recall using a character
         wfX25PadPortCurrentCfgX3echo 1.3.6.1.4.1.18.3.5.9.12.5.1.8 integer read-only
PAD echo
         wfX25PadPortCurrentCfgX3forward 1.3.6.1.4.1.18.3.5.9.12.5.1.9 integer read-only
Selection of the data forwarding characters
         wfX25PadPortCurrentCfgX3idle 1.3.6.1.4.1.18.3.5.9.12.5.1.10 integer read-only
Selection of the idle timer delay
         wfX25PadPortCurrentCfgX3device 1.3.6.1.4.1.18.3.5.9.12.5.1.11 integer read-only
Ancillary device control
         wfX25PadPortCurrentCfgX3signals 1.3.6.1.4.1.18.3.5.9.12.5.1.12 integer read-only
Control of PAD service signals
         wfX25PadPortCurrentCfgX3break 1.3.6.1.4.1.18.3.5.9.12.5.1.13 integer read-only
Selection of operation of the PAD on receipt of the break signal
         wfX25PadPortCurrentCfgX3discard 1.3.6.1.4.1.18.3.5.9.12.5.1.14 integer read-only
Discard output
         wfX25PadPortCurrentCfgX3CRpad 1.3.6.1.4.1.18.3.5.9.12.5.1.15 integer read-only
Padding after carriage return
         wfX25PadPortCurrentCfgX3folding 1.3.6.1.4.1.18.3.5.9.12.5.1.16 integer read-only
Line folding
         wfX25PadPortCurrentCfgX3speed 1.3.6.1.4.1.18.3.5.9.12.5.1.17 integer read-only
Binary speed
         wfX25PadPortCurrentCfgX3flow 1.3.6.1.4.1.18.3.5.9.12.5.1.18 integer read-only
Flow Control of the PAD by the start-stop mode DTE
         wfX25PadPortCurrentCfgX3LFinsert 1.3.6.1.4.1.18.3.5.9.12.5.1.19 integer read-only
Linefeed insertion after carriage return
         wfX25PadPortCurrentCfgX3LFpad 1.3.6.1.4.1.18.3.5.9.12.5.1.20 integer read-only
Linefeed padding
         wfX25PadPortCurrentCfgX3Edit 1.3.6.1.4.1.18.3.5.9.12.5.1.21 integer read-only
Editing
         wfX25PadPortCurrentCfgX3Cdelete 1.3.6.1.4.1.18.3.5.9.12.5.1.22 integer read-only
Character delete
         wfX25PadPortCurrentCfgX3Ldelete 1.3.6.1.4.1.18.3.5.9.12.5.1.23 integer read-only
Line delete
         wfX25PadPortCurrentCfgX3Ldisplay 1.3.6.1.4.1.18.3.5.9.12.5.1.24 integer read-only
Line display
         wfX25PadPortCurrentCfgX3Esignals 1.3.6.1.4.1.18.3.5.9.12.5.1.25 integer read-only
Editing PAD service signals
         wfX25PadPortCurrentCfgX3Mask 1.3.6.1.4.1.18.3.5.9.12.5.1.26 integer read-only
Echo mask
         wfX25PadPortCurrentCfgX3parity 1.3.6.1.4.1.18.3.5.9.12.5.1.27 integer read-only
Parity treatment
         wfX25PadPortCurrentCfgX3page 1.3.6.1.4.1.18.3.5.9.12.5.1.28 integer read-only
Page wait
         wfX25PadPortCurrentCfgLenUserData 1.3.6.1.4.1.18.3.5.9.12.5.1.29 integer read-only
Length of the user defined data
         wfX25PadPortCurrentCfgUserData 1.3.6.1.4.1.18.3.5.9.12.5.1.30 octet string read-only
User defined data field represented in hexadecimal
         wfX25PadPortCurrentCfgLenRawFacilities 1.3.6.1.4.1.18.3.5.9.12.5.1.31 integer read-only
Length of the user defined facilities
         wfX25PadPortCurrentCfgRawFacilitiesData 1.3.6.1.4.1.18.3.5.9.12.5.1.32 octet string read-only
User defined facilities filed represented in hexadecimal
         wfX25PadPortCurrentCfgReverseCharge 1.3.6.1.4.1.18.3.5.9.12.5.1.33 octet string read-only
If subscribed to, authorizes the DCE to transmit to the DTE incoming calls which request the reverse charging facility. In absence of this facility the DCE will not transmit to the DTE incoming calls which request the reverse charging facility.
         wfX25PadPortCurrentCfgThruClassNegotiation 1.3.6.1.4.1.18.3.5.9.12.5.1.34 octet string read-only
This facility, if subscribed to, allows negotiation on a per call basis of the throughput classes. The throughput classes are considered independently for each direction of data transmission.
         wfX25PadPortCurrentCfgPacketSizeNegotiation 1.3.6.1.4.1.18.3.5.9.12.5.1.35 octet string read-only
This facility, if subscribed to, will cause the DTE to request packet sizes for both directions of data transmission.
         wfX25PadPortCurrentCfgWindowSizeNegotiation 1.3.6.1.4.1.18.3.5.9.12.5.1.36 octet string read-only
This facility, if subscribed to, will cause the DTE to request window sizes for both directions of data transmission.
         wfX25PadPortCurrentCfgIntervalTimer 1.3.6.1.4.1.18.3.5.9.12.5.1.37 integer read-write
Time (where 1 equals 10 milliseconds) that the X.25 PAD will wait before forwarding packets with characters in them
         wfX25PadPortCurrentCfgFullAddressing 1.3.6.1.4.1.18.3.5.9.12.5.1.38 integer read-write
Determines whether calling addresses should be included or not Enumeration: 'disabled': 2, 'enabled': 1.
 wfX25PadPortStatTable 1.3.6.1.4.1.18.3.5.9.12.6 no-access
Table of X25 PAD Port Stat Objects
     wfX25PadPortStatEntry 1.3.6.1.4.1.18.3.5.9.12.6.1 no-access
An entry in the X25 Pad Port Stat Table
         wfX25PadPortStatState 1.3.6.1.4.1.18.3.5.9.12.6.1.1 integer read-only
Current state of X.25 PAD sofware on the I-SDB Enumeration: 'down': 2, 'init': 3, 'up': 1.
         wfX25PadPortStatSlot 1.3.6.1.4.1.18.3.5.9.12.6.1.2 integer read-only
Instance ID Slot, filled in by ISDB mib gate
         wfX25PadPortStatConnector 1.3.6.1.4.1.18.3.5.9.12.6.1.3 integer read-only
Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot.
         wfX25PadPortStatNumber 1.3.6.1.4.1.18.3.5.9.12.6.1.4 integer read-only
Instance ID Async Port, filled in by ISDB mib gate
         wfX25PadPortStatRxOctets 1.3.6.1.4.1.18.3.5.9.12.6.1.5 counter read-only
Number of octets received on this async port
         wfX25PadPortStatTxOctets 1.3.6.1.4.1.18.3.5.9.12.6.1.6 counter read-only
Number of octets transmitted on this async port
         wfX25PadPortStatRxPackets 1.3.6.1.4.1.18.3.5.9.12.6.1.7 counter read-only
Number of packets received on this async port
         wfX25PadPortStatTxPackets 1.3.6.1.4.1.18.3.5.9.12.6.1.8 counter read-only
Number of packets transmitted on this async port
         wfX25PadPortStatRemoteX121Addr 1.3.6.1.4.1.18.3.5.9.12.6.1.9 displaystring read-only
Remote X.121 address
         wfX25PadPortStatLCN 1.3.6.1.4.1.18.3.5.9.12.6.1.10 integer read-only
Current connection's logical channel number
         wfX25PadPortStatDuration 1.3.6.1.4.1.18.3.5.9.12.6.1.11 integer read-only
Time in seconds of the call
         wfX25PadPortStatRxRR 1.3.6.1.4.1.18.3.5.9.12.6.1.12 counter read-only
Number of receiver ready packets received
         wfX25PadPortStatTxRR 1.3.6.1.4.1.18.3.5.9.12.6.1.13 counter read-only
Number of receiver ready packets transmitted
         wfX25PadPortStatRxRNR 1.3.6.1.4.1.18.3.5.9.12.6.1.14 counter read-only
Number of receiver not ready packets received
         wfX25PadPortStatTxRNR 1.3.6.1.4.1.18.3.5.9.12.6.1.15 counter read-only
Number of receiver not ready packets transmitted
         wfX25PadPortStatRxClr 1.3.6.1.4.1.18.3.5.9.12.6.1.16 counter read-only
Number of call clear packets received
         wfX25PadPortStatTxClr 1.3.6.1.4.1.18.3.5.9.12.6.1.17 counter read-only
Number of call clear packets transmitted
         wfX25PadPortStatRxReset 1.3.6.1.4.1.18.3.5.9.12.6.1.18 counter read-only
Number of reset packets received
         wfX25PadPortStatTxReset 1.3.6.1.4.1.18.3.5.9.12.6.1.19 counter read-only
Number of reset packets transmitted
         wfX25PadPortStatRxCall 1.3.6.1.4.1.18.3.5.9.12.6.1.20 counter read-only
Number of call request packets received
         wfX25PadPortStatTxCall 1.3.6.1.4.1.18.3.5.9.12.6.1.21 counter read-only
Number of call request packets transmitted
         wfX25PadPortStatConnections 1.3.6.1.4.1.18.3.5.9.12.6.1.22 counter read-only
Number of connections made
         wfX25PadPortStatDisconnects 1.3.6.1.4.1.18.3.5.9.12.6.1.23 counter read-only
Number of disconnects made
         wfX25PadPortStatLastCause 1.3.6.1.4.1.18.3.5.9.12.6.1.24 integer read-only
Last cause code
         wfX25PadPortStatLastDiag 1.3.6.1.4.1.18.3.5.9.12.6.1.25 integer read-only
Last diag code