Wellfleet-Voice-T1-MIB: View SNMP OID List / Download MIB

VENDOR: WELLFLEET


 Home MIB: Wellfleet-Voice-T1-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Wellfleet-COMMON-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wfVoiceT1Table 1.3.6.1.4.1.18.3.4.35.1 no-access
Voice T1 line record
     wfVoiceT1Entry 1.3.6.1.4.1.18.3.4.35.1.1 no-access
An entry in the T1 table
         wfVoiceT1Delete 1.3.6.1.4.1.18.3.4.35.1.1.1 integer read-write
create/delete parameter, dflt = created Enumeration: 'deleted': 2, 'created': 1.
         wfVoiceT1Disable 1.3.6.1.4.1.18.3.4.35.1.1.2 integer read-write
enable/disable parameter, dflt = enabled Enumeration: 'disabled': 2, 'enabled': 1.
         wfVoiceT1State 1.3.6.1.4.1.18.3.4.35.1.1.3 integer read-only
physical line status, updated by T1 line driver Enumeration: 'redAlarm': 3, 'init': 1, 'yellowAlarm': 4, 'sync': 2, 'pulseDensityViolation': 5.
         wfVoiceT1Slot 1.3.6.1.4.1.18.3.4.35.1.1.4 integer read-only
instance ID Slot, filled in by driver. For the FBR this is a game slot.
         wfVoiceT1Connector 1.3.6.1.4.1.18.3.4.35.1.1.5 integer read-only
instance ID Connector, filled in by driver. For the FBR, this attribute is an encoded value and is equal to 'pci slot' * 1000 + 'module'*100 + 'connector'.
         wfVoiceT1FrameType 1.3.6.1.4.1.18.3.4.35.1.1.6 integer read-write
Frame Type - differentiates between two tarrifed framing formats D4 and ESF. Enumeration: 'esf': 2, 'd4': 1.
         wfVoiceT1TransmitWaveform 1.3.6.1.4.1.18.3.4.35.1.1.7 integer read-write
Specifies T1 transmit waveform settings. Legal values are: long haul (LBO 0.0dB) long haul (LBO 7.5dB) long haul (LBO 15.0dB) long haul (LBO 22.5dB) short haul (0-110 ft) short haul (110-220 ft) short haul (220-330 ft) short haul (330-440 ft) short haul (440-550 ft) short haul (550-660 ft) Note that this attribute is not supported by all T1 interfaces. For those interfaces that DO NOT support this attribute, the wfDs1E1PortSignalLevel attribute is used instead. Enumeration: 'long-haul-0point0': 1, 'short-haul-440to550': 9, 'short-haul-110to220': 6, 'long-haul-22point5': 4, 'short-haul-330to440': 8, 'short-haul-0to110': 5, 'short-haul-220to330': 7, 'long-haul-15point0': 3, 'short-haul-550to660': 10, 'long-haul-7point5': 2.
         wfVoiceT1LineCode 1.3.6.1.4.1.18.3.4.35.1.1.8 integer read-write
Binary 8 zeros suppression or Alternate Mark Inversion Enumeration: 'ami': 2, 'b8zs': 1.
         wfVoiceT1ReceiveClock 1.3.6.1.4.1.18.3.4.35.1.1.9 integer read-write
Clock Mode - Specifiess the usage of the T1 receive clock. Primary: Apply the receive clock of this T1 line as the system clock source if it is available. Secondary: When Primary clock source is not available, use secondary as the system clock source. Ignore: Never use this for system clock source. Enumeration: 'ignore': 3, 'primary': 1, 'secondary': 2.
         wfVoiceT1TransmitClock 1.3.6.1.4.1.18.3.4.35.1.1.10 integer read-write
Clock Mode - Specifies the source of the T1 transmit clock. Internal: Apply the system clock source as the transmit clock source. External: Loopback, use the receive clock of this T1 line as the transmit clock source. Enumeration: 'internal': 1, 'external': 2.
 wfVoiceT1StatusTable 1.3.6.1.4.1.18.3.4.35.2 no-access
Table containing Voice over IP T1 channel status records
     wfVoiceT1StatusEntry 1.3.6.1.4.1.18.3.4.35.2.1 no-access
An entry in the voice channel status table
         wfVoiceT1BipolarVios 1.3.6.1.4.1.18.3.4.35.2.1.1 counter read-only
Number of xGCP control frames successfully rcvd.
         wfVoiceT1FrameBitErrs 1.3.6.1.4.1.18.3.4.35.2.1.2 counter read-only
Number of xGCP control frames successfully rcvd.
         wfVoiceT1LossOfFrameErrs 1.3.6.1.4.1.18.3.4.35.2.1.3 counter read-only
Number of xGCP control frames successfully rcvd.
         wfVoiceT1SuperFrameErrs 1.3.6.1.4.1.18.3.4.35.2.1.4 counter read-only
Number of xGCP control frames successfully rcvd.
         wfVoiceT1CRC6Errs 1.3.6.1.4.1.18.3.4.35.2.1.5 counter read-only
Number of xGCP control frames successfully rcvd.
         wfVoiceT1RcvYelAlarms 1.3.6.1.4.1.18.3.4.35.2.1.6 counter read-only
Number of xGCP control frames successfully rcvd.
         wfVoiceT1RcvCarrierLoss 1.3.6.1.4.1.18.3.4.35.2.1.7 counter read-only
Number of xGCP control frames successfully rcvd.
         wfVoiceT1RcvRedAlarms 1.3.6.1.4.1.18.3.4.35.2.1.8 counter read-only
Number of xGCP control frames successfully rcvd.
   wfVoIPT1Error 1.3.6.1.4.1.18.3.4.350.1
The SNMP trap that is generated when a T1 interface detects an error.