Wellfleet-TFTP-MIB: View SNMP OID List / Download MIB

VENDOR: WELLFLEET


 Home MIB: Wellfleet-TFTP-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wfTftp 1.3.6.1.4.1.18.3.5.3.6
     wfTftpDisable 1.3.6.1.4.1.18.3.5.3.6.1 integer read-write
Enables or Disables TFTP Subsystem Enumeration: 'disabled': 2, 'enabled': 1.
     wfTftpDefaultVolume 1.3.6.1.4.1.18.3.5.3.6.2 integer read-write
The file system volume number to which transferred files will be written and from which they will be retrieved. The volume number corresponds to the slot number on which the volume resides. On systems with a floppy disk, the value 65 represents volume 'A'. On systems which support flash file system partitioning, the volume is = (slot * 100 + partition number) where 0 and 1 are valid partition numbers, and represent 'partition a' and 'partition b' respectively. If no default volume is specified, the system chooses the lowest available active volume. Enumeration: 'volume5a': 500, 'volume5b': 501, 'volume10b': 1001, 'volume10a': 1000, 'volume9a': 900, 'volume9b': 901, 'volume5': 5, 'volume1a': 100, 'volume4': 4, 'volume7': 7, 'volume1b': 101, 'volume1': 1, 'volume7b': 701, 'volume3': 3, 'volume2': 2, 'volume3b': 301, 'volume3a': 300, 'volume9': 9, 'volume8': 8, 'volume8b': 801, 'volume7a': 700, 'volume8a': 800, 'volume4b': 401, 'volume4a': 400, 'volume11a': 1100, 'volume11b': 1101, 'volume13b': 1301, 'volume13a': 1300, 'volume11': 11, 'volume10': 10, 'volume13': 13, 'volume12': 12, 'volumea': 65, 'volume14': 14, 'volume12a': 1200, 'volume12b': 1201, 'volume14b': 1401, 'volume14a': 1400, 'volume6a': 600, 'volume6b': 601, 'volume2a': 200, 'volume2b': 201, 'volume6': 6.
     wfTftpXfers 1.3.6.1.4.1.18.3.5.3.6.3 counter read-only
Number of Transfers in Progress
     wfTftpTimeOut 1.3.6.1.4.1.18.3.5.3.6.4 integer read-write
General Retransmission time-out value (seconds)
     wfTftpCloseTimeOut 1.3.6.1.4.1.18.3.5.3.6.5 integer read-write
Retransmission time-out value for sender of final ACK (seconds)
     wfTftpRexmit 1.3.6.1.4.1.18.3.5.3.6.6 integer read-write
Maximum Number of Retransmissions
     wfTftpIpTos 1.3.6.1.4.1.18.3.5.3.6.7 integer read-write
The Type Of Service value set in the IP datagram specifies to the Internet transport layer how the datagram should be handled. For TFTP packet transfers low delay is preferred Enumeration: 'lowdelay': 2, 'normal': 1.
     wfTftpInFiles 1.3.6.1.4.1.18.3.5.3.6.8 counter read-only
Number of files Successfully received
     wfTftpOutFiles 1.3.6.1.4.1.18.3.5.3.6.9 counter read-only
Number of files Successfully sent
     wfTftpInWRQ 1.3.6.1.4.1.18.3.5.3.6.10 counter read-only
Number of write requests received
     wfTftpOutWRQ 1.3.6.1.4.1.18.3.5.3.6.11 counter read-only
Number of write requests sent
     wfTftpInRRQ 1.3.6.1.4.1.18.3.5.3.6.12 counter read-only
Number of read requests received
     wfTftpOutRRQ 1.3.6.1.4.1.18.3.5.3.6.13 counter read-only
Number of read requests sent
     wfTftpRexmitPkts 1.3.6.1.4.1.18.3.5.3.6.14 counter read-only
Number of Re-transmitted packets
     wfTftpInErr 1.3.6.1.4.1.18.3.5.3.6.15 counter read-only
Number of Error PDUs Received
     wfTftpOutErr 1.3.6.1.4.1.18.3.5.3.6.16 counter read-only
Number of Error PDUs Sent
     wfTftpAborts 1.3.6.1.4.1.18.3.5.3.6.17 counter read-only
Number of Aborted Pseudo Connections
     wfTftpDelete 1.3.6.1.4.1.18.3.5.3.6.18 integer read-write
Create/Delete parameter. Default is created. Enumeration: 'deleted': 2, 'created': 1.