Wellfleet-T1-MIB: View SNMP OID List / Download MIB

VENDOR: WELLFLEET


 Home MIB: Wellfleet-T1-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Wellfleet-COMMON-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wfT1Table 1.3.6.1.4.1.18.3.4.10 no-access
T1 line record
       wfT1Entry 1.3.6.1.4.1.18.3.4.10.1 no-access
An entry in the T1 table
           wfT1Delete 1.3.6.1.4.1.18.3.4.10.1.1 integer read-write
create/delete parameter, dflt = created Enumeration: 'deleted': 2, 'created': 1.
           wfT1Disable 1.3.6.1.4.1.18.3.4.10.1.2 integer read-write
enable/disable parameter, dflt = enabled Enumeration: 'disabled': 2, 'enabled': 1.
           wfT1State 1.3.6.1.4.1.18.3.4.10.1.3 integer read-only
line driver state variable, Not Present, Init, Up Enumeration: 'notpresent': 4, 'init': 3, 'up': 1.
           wfT1Slot 1.3.6.1.4.1.18.3.4.10.1.4 integer read-only
instance ID Slot, filled in by driver
           wfT1Connector 1.3.6.1.4.1.18.3.4.10.1.5 integer read-only
instance ID Connector, filled in by driver Enumeration: 'two': 2, 'one': 1.
           wfT1Madr 1.3.6.1.4.1.18.3.4.10.1.6 octet string read-only
Line mac address, filled in by driver
           wfT1FrameType 1.3.6.1.4.1.18.3.4.10.1.7 integer read-write
Frame Type - differentiates between two tarrifed framing formats D4 and ESF. Enumeration: 'esf': 2, 'd4': 1.
           wfT1LineBuildout 1.3.6.1.4.1.18.3.4.10.1.8 integer read-write
Line Buildout - Approximate length of cable
           wfT1B8ZSSupport 1.3.6.1.4.1.18.3.4.10.1.9 integer read-write
B8ZS Support - Enables or disables Binary 8 zeros suppression Enumeration: 'disabled': 2, 'enabled': 1.
           wfT1ClockMode 1.3.6.1.4.1.18.3.4.10.1.10 integer read-write
Clock Mode - Specifies the source of the T1 transmit clock Enumeration: 'manual': 4, 'internal': 1, 'slave': 2.
           wfT1MiniDacs 1.3.6.1.4.1.18.3.4.10.1.11 displaystring read-write
MiniDacs Configuration - assigns each T1 channel to a specific function
           wfT1BipolarVios 1.3.6.1.4.1.18.3.4.10.1.12 counter read-only
Number of Bipolar Violations
           wfT1FrameBitErrs 1.3.6.1.4.1.18.3.4.10.1.13 counter read-only
Number of frame bit errors
           wfT1OutOfFrameErrs 1.3.6.1.4.1.18.3.4.10.1.14 counter read-only
Number of Out of Frame errors
           wfT1SuperFrameErrs 1.3.6.1.4.1.18.3.4.10.1.15 counter read-only
Number of Superframe errors
           wfT1RcvYelAlarms 1.3.6.1.4.1.18.3.4.10.1.16 counter read-only
Number of Yellow Alarms Received
           wfT1RcvCarrierLoss 1.3.6.1.4.1.18.3.4.10.1.17 counter read-only
Number of instances of carrier loss
           wfT1RcvRedAlarms 1.3.6.1.4.1.18.3.4.10.1.18 counter read-only
Number of Red Alarm Received