Wellfleet-ISDN-MIB: View SNMP OID List / Download MIB

VENDOR: WELLFLEET


 Home MIB: Wellfleet-ISDN-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wfModemIfTable 1.3.6.1.4.1.18.3.5.9.8.1 no-access
ISDN SYNC line record
     wfModemIfEntry 1.3.6.1.4.1.18.3.5.9.8.1.1 no-access
An entry in the MODEM_IF table
         wfModemIfDelete 1.3.6.1.4.1.18.3.5.9.8.1.1.1 integer read-write
Create/Delete parameter Enumeration: 'deleted': 2, 'created': 1.
         wfModemIfSlot 1.3.6.1.4.1.18.3.5.9.8.1.1.2 integer read-only
Instance ID Slot, filled in by driver
         wfModemIfConnectStatus 1.3.6.1.4.1.18.3.5.9.8.1.1.3 integer read-only
Dial up connection status Enumeration: 'connected': 1, 'disconnected': 2.
         wfModemIfConnector 1.3.6.1.4.1.18.3.5.9.8.1.1.4 integer read-only
Instance ID Connector, filled in by driver Enumeration: 'four': 4, 'three': 3, 'two': 2, 'one': 1.
         wfModemIfCct 1.3.6.1.4.1.18.3.5.9.8.1.1.5 integer read-only
CCT number for this line instance
         wfModemIfConnectWhen 1.3.6.1.4.1.18.3.5.9.8.1.1.6 integer read-write
when to connect line Enumeration: 'enable': 2, 'data': 1.
         wfModemIfConnectionTime 1.3.6.1.4.1.18.3.5.9.8.1.1.7 integer read-write
connection wait timer interval (Seconds)
         wfModemIfMinDurationTime 1.3.6.1.4.1.18.3.5.9.8.1.1.8 integer read-write
min duration time for the call (Seconds)
         wfModemIfInactivityTime 1.3.6.1.4.1.18.3.5.9.8.1.1.9 integer read-write
In the absence of data traffic, the timeout period before a dial line is disconnected. Value is in MINUTES (max 12 hours)
         wfModemIfRetryDelayTime 1.3.6.1.4.1.18.3.5.9.8.1.1.10 integer read-write
delay to wait after retrys fails. Enumeration: 'default': 3.
         wfModemIfLineBandwidth 1.3.6.1.4.1.18.3.5.9.8.1.1.11 integer read-write
requested bandwidth. NULL_VAL = Default not to set bandwidth Enumeration: 'bw1536k': 1536, 'bw56k': 56, 'bw484k': 384, 'bw64k': 64.
         wfModemIfChanAggrMax 1.3.6.1.4.1.18.3.5.9.8.1.1.12 integer read-write
max number of chans to aggregate. NULL_VAL = Default not to used value.
         wfModemIfChanAggrMin 1.3.6.1.4.1.18.3.5.9.8.1.1.13 integer read-write
min number of chans to aggregate. NULL_VAL = Default not to used value.
         wfModemIfChanMgmt 1.3.6.1.4.1.18.3.5.9.8.1.1.14 integer read-write
channel mgmt type. NULL_VAL = no management Enumeration: 'minmgmt': 2, 'deltamgmt': 3, 'disablemgmt': 1.
         wfModemIfRestrictType 1.3.6.1.4.1.18.3.5.9.8.1.1.15 integer read-write
call restriction type. NULL_VAL = Default not to restrict calls, 1 = Allow defined inbound call numbers only Enumeration: 'calls': 1.
         wfModemIfDialRetryCount 1.3.6.1.4.1.18.3.5.9.8.1.1.16 integer read-write
Redial count
         wfModemIfRetries 1.3.6.1.4.1.18.3.5.9.8.1.1.17 counter read-only
Number of retries attempted to connect a dialup line
         wfModemIfForceDial 1.3.6.1.4.1.18.3.5.9.8.1.1.18 integer read-write
Force the modem to dial Enumeration: 'false': 2, 'true': 1.
         wfModemIfForceHangup 1.3.6.1.4.1.18.3.5.9.8.1.1.19 integer read-write
Force the modem to disconnect Enumeration: 'false': 2, 'true': 1.
         wfModemIfBringUpHour 1.3.6.1.4.1.18.3.5.9.8.1.1.20 integer read-write
Time of day hour to allow a line to dial
         wfModemIfBringUpMinute 1.3.6.1.4.1.18.3.5.9.8.1.1.21 integer read-write
Time of day minute to allow a line to dial
         wfModemIfTakeDownHour 1.3.6.1.4.1.18.3.5.9.8.1.1.22 integer read-write
Time of day hour to take down a dial line
         wfModemIfTakeDownMinute 1.3.6.1.4.1.18.3.5.9.8.1.1.23 integer read-write
Time of day minute to take down a dial line
         wfModemIfConnectRmtStationNum 1.3.6.1.4.1.18.3.5.9.8.1.1.24 displaystring read-only
Phone number connected to (V.25bis mode only)
         wfModemIfConnectSubAddr 1.3.6.1.4.1.18.3.5.9.8.1.1.25 displaystring read-only
Phone number sub address for isdn numbers
         wfModemIfMediaType 1.3.6.1.4.1.18.3.5.9.8.1.1.26 integer read-only
modem type Enumeration: 'raisedtr': 1, 'hayes': 3, 'v25bis': 2.
         wfModemIfUpperLayerTimeOut 1.3.6.1.4.1.18.3.5.9.8.1.1.27 integer read-write
time out value for upper layer protocol initialization (seconds)
         wfModemIfRingIndicator 1.3.6.1.4.1.18.3.5.9.8.1.1.28 integer read-write
Ring Indicator enable/disable parameter Enumeration: 'disabled': 2, 'enabled': 1.
         wfModemIfFsmDebug 1.3.6.1.4.1.18.3.5.9.8.1.1.29 integer read-write
FSM Debug indicator (for V25bis or RaiseDtr FSM) Enumeration: 'disabled': 2, 'enabled': 1.
 wfIsdnMsgCtrTable 1.3.6.1.4.1.18.3.5.9.8.4 no-access
ISDN message counters, one entry per Digital Subscriber Loop (DSL), maintained by the Line Manager.
     wfIsdnMsgCtrEntry 1.3.6.1.4.1.18.3.5.9.8.4.1 no-access
An entry in the ISDN message counter table
         wfIsdnMsgCtrSlot 1.3.6.1.4.1.18.3.5.9.8.4.1.1 integer read-write
Digital Subscriber Loop (DSL) these counters apply to
         wfIsdnMsgCtrDslID 1.3.6.1.4.1.18.3.5.9.8.4.1.2 integer read-write
Digital Subscriber Loop (DSL) these counters apply to
         wfIsdnMsgCallProcInd 1.3.6.1.4.1.18.3.5.9.8.4.1.3 counter read-only
Call Proceeding Indication from the network
         wfIsdnMsgClearConf 1.3.6.1.4.1.18.3.5.9.8.4.1.4 counter read-only
Release Complete from the network
         wfIsdnMsgClearInd 1.3.6.1.4.1.18.3.5.9.8.4.1.5 counter read-only
Release Indication from the network
         wfIsdnMsgConnectInd 1.3.6.1.4.1.18.3.5.9.8.4.1.6 counter read-only
Connect Indication from the network
         wfIsdnMsgSetupInd 1.3.6.1.4.1.18.3.5.9.8.4.1.7 counter read-only
Setup Indication from the network
         wfIsdnMsgRegisterConf 1.3.6.1.4.1.18.3.5.9.8.4.1.8 counter read-only
Register Confirmation from the network
         wfIsdnMsgMgmtInd 1.3.6.1.4.1.18.3.5.9.8.4.1.9 counter read-only
Management Indication from the network
         wfIsdnMsgDiscInd 1.3.6.1.4.1.18.3.5.9.8.4.1.10 counter read-only
Disconnect Indication from the network
         wfIsdnMsgActInd 1.3.6.1.4.1.18.3.5.9.8.4.1.11 counter read-only
Activation Indication from the driver
         wfIsdnMsgDeactInd 1.3.6.1.4.1.18.3.5.9.8.4.1.12 counter read-only
Deactivation Indication from the driver
         wfIsdnMsgConnectConf 1.3.6.1.4.1.18.3.5.9.8.4.1.13 counter read-only
Connect Acknowledge from the network
         wfIsdnMsgAlertReq 1.3.6.1.4.1.18.3.5.9.8.4.1.14 counter read-only
Alert Request to the network
         wfIsdnMsgCallProcReq 1.3.6.1.4.1.18.3.5.9.8.4.1.15 counter read-only
Call Proceeding Request to the network
         wfIsdnMsgClearReq 1.3.6.1.4.1.18.3.5.9.8.4.1.16 counter read-only
Clear Request to the network
         wfIsdnMsgConnectReq 1.3.6.1.4.1.18.3.5.9.8.4.1.17 counter read-only
Connect Request to the network
         wfIsdnMsgSetupReq 1.3.6.1.4.1.18.3.5.9.8.4.1.18 counter read-only
Setup Request to the network
         wfIsdnMsgMgmtReq 1.3.6.1.4.1.18.3.5.9.8.4.1.19 counter read-only
Management Request to the network
         wfIsdnMsgDiscReq 1.3.6.1.4.1.18.3.5.9.8.4.1.20 counter read-only
Disconnect Request to the network
         wfIsdnMsgActReq 1.3.6.1.4.1.18.3.5.9.8.4.1.21 counter read-only
Activate Request to the driver
         wfIsdnMsgDeactReq 1.3.6.1.4.1.18.3.5.9.8.4.1.22 counter read-only
Deactivate Request to the driver
         wfIsdnMsgAlertInd 1.3.6.1.4.1.18.3.5.9.8.4.1.23 counter read-only
Alert Indication from the network
         wfIsdnMsgInfoInd 1.3.6.1.4.1.18.3.5.9.8.4.1.24 counter read-only
Information Indication from the network
 wfIsdnHostActionTable 1.3.6.1.4.1.18.3.5.9.8.5 no-access
This table is for debugging purposes only! It allows Host initiated call control actions.
     wfIsdnHostActionEntry 1.3.6.1.4.1.18.3.5.9.8.5.1 no-access
An entry in the host action table
         wfIsdnHostActSlot 1.3.6.1.4.1.18.3.5.9.8.5.1.1 integer read-only
the slot the interface is on
         wfIsdnHostActDslId 1.3.6.1.4.1.18.3.5.9.8.5.1.2 integer read-write
DSL id of the interface
         wfIsdnHostActCallID 1.3.6.1.4.1.18.3.5.9.8.5.1.3 integer read-write
Call ID
         wfIsdnHostActMsgType 1.3.6.1.4.1.18.3.5.9.8.5.1.4 integer read-write
type of message to be sent to call control (or ME) Enumeration: 'info': 15, 'deactivate': 83, 'setup': 28, 'disc': 50, 'activate': 82.
         wfIsdnHostActCalledPtyType 1.3.6.1.4.1.18.3.5.9.8.5.1.5 integer read-write
called party type Enumeration: 'intl': 1, 'nat': 2, 'loc': 4.
         wfIsdnHostActCalledPtyPlan 1.3.6.1.4.1.18.3.5.9.8.5.1.6 integer read-write
called party plan Enumeration: 'tele': 2, 'pvt': 9, 'isdn': 1.
         wfIsdnHostActCalledPtyNum 1.3.6.1.4.1.18.3.5.9.8.5.1.7 octet string read-write
called party number in ASCII digits
         wfIsdnHostActCallingPtyType 1.3.6.1.4.1.18.3.5.9.8.5.1.8 integer read-write
calling party type Enumeration: 'intl': 1, 'nat': 2, 'loc': 4.
         wfIsdnHostActCallingPtyPlan 1.3.6.1.4.1.18.3.5.9.8.5.1.9 integer read-write
calling party plan Enumeration: 'tele': 2, 'pvt': 9, 'isdn': 1.
         wfIsdnHostActCallingPtyNum 1.3.6.1.4.1.18.3.5.9.8.5.1.10 octet string read-write
calling party number in ASCII digits
         wfIsdnHostActCallingPtyPres 1.3.6.1.4.1.18.3.5.9.8.5.1.11 integer read-write
calling party presentation indicator Enumeration: 'unavl': 2, 'rest': 1.
         wfIsdnHostActChanPrefBit 1.3.6.1.4.1.18.3.5.9.8.5.1.12 integer read-write
channel preferred/exclusive bit
         wfIsdnHostActChanSelection 1.3.6.1.4.1.18.3.5.9.8.5.1.13 integer read-write
channel selection Enumeration: 'channelb2': 2, 'channelb1': 1, 'channel': 3.
         wfIsdnHostActCauseCode 1.3.6.1.4.1.18.3.5.9.8.5.1.14 integer read-write
cause code Enumeration: 'barred': 54, 'unspecified': 31, 'rejected': 21, 'normal': 16.
         wfIsdnHostActTransferCap 1.3.6.1.4.1.18.3.5.9.8.5.1.15 integer read-write
Transfer Capability required for Bearer Cap IE Enumeration: 'restricted': 9, 'unrestricted': 8.
         wfIsdnHostActCldSadType 1.3.6.1.4.1.18.3.5.9.8.5.1.16 integer read-write
Called Party Subaddress Type Enumeration: 'user': 2.
         wfIsdnHostActCldSadNum 1.3.6.1.4.1.18.3.5.9.8.5.1.17 octet string read-write
Called Party subaddress Max length 20 octets
         wfIsdnHostActClgSadType 1.3.6.1.4.1.18.3.5.9.8.5.1.18 integer read-write
Calling party subaddress Type Enumeration: 'user': 2.
         wfIsdnHostActClgSadNum 1.3.6.1.4.1.18.3.5.9.8.5.1.19 octet string read-write
Called Party subaddress Max length 20 octets
         wfIsdnHostActCldSadPres 1.3.6.1.4.1.18.3.5.9.8.5.1.20 integer read-write
Called party subaddress Type Enumeration: 'enable': 1.
         wfIsdnHostActClgSadPres 1.3.6.1.4.1.18.3.5.9.8.5.1.21 integer read-write
Calling party subaddress presentation indication Enumeration: 'enable': 1.
 wfIsdnSwitchCfgTable 1.3.6.1.4.1.18.3.5.9.8.6 no-access
This is the Switchtype Configuration for the ISDN signaling stack.
     wfIsdnSwitchCfgEntry 1.3.6.1.4.1.18.3.5.9.8.6.1 no-access
An entry in the ISDN Switch table
         wfIsdnSwitchCfgDelete 1.3.6.1.4.1.18.3.5.9.8.6.1.1 integer read-write
Create / Delete Parameter Enumeration: 'deleted': 2, 'created': 1.
         wfIsdnSwitchCfgSlot 1.3.6.1.4.1.18.3.5.9.8.6.1.2 integer read-only
Slot which has the ISDN interface
         wfIsdnSwitchCfgType 1.3.6.1.4.1.18.3.5.9.8.6.1.3 integer read-write
The Type of switch from which the ISDN service is subscribed for this slot. Enumeration: 'prikdd': 21, 'prinet5': 27, 'printt': 22, 'brintt': 12, 'pri5ess': 18, 'brivn3': 10, 'bridms100': 7, 'briswissnet3': 2, 'bri5ess': 4, 'brinet3': 1, 'prits014': 29, 'brini1': 15, 'pridms100': 20, 'brikdd': 11, 'brits013': 14, 'pri4ess': 17.
         wfIsdnSwitchTestMode 1.3.6.1.4.1.18.3.5.9.8.6.1.4 integer read-write
enable engineering test mode
         wfIsdnSwitchIncomingFilter 1.3.6.1.4.1.18.3.5.9.8.6.1.5 integer read-write
Filter Calling address in the Incoming call Enumeration: 'on': 1, 'off': 2.
         wfIsdnSwitchTraceFacility 1.3.6.1.4.1.18.3.5.9.8.6.1.6 integer read-write
Enable/Disable ISDN protocol stack message tracing facility - when this is enabled, all messages exchanged between Layer 2 and Layer 3 ISDN entities will be captured to the event log as TRACE messages Enumeration: 'enabled': 1.
         wfIsdnSwitchScreenedCalls 1.3.6.1.4.1.18.3.5.9.8.6.1.7 counter read-only
Number of incoming calls ignored because of screening, ie. the Calling Party number was not in the list of approved numbers
         wfIsdnSwitchSendingComplete 1.3.6.1.4.1.18.3.5.9.8.6.1.8 integer read-write
The Sending Complete IE is required to be sent in the Setup message indicating en-bloc sending. Enable this attribute to include Sending Complete IE if the Switch providing ISDN service requires it. Enumeration: 'disabled': 2, 'enabled': 1.
         wfIsdnSwitchGlobalRateAdaption 1.3.6.1.4.1.18.3.5.9.8.6.1.9 integer read-write
Global Rate Adaption, If this value is configured request the configured Rate adpation when establishing connection. Enumeration: 'rate56': 2, 'rate64': 1.
         wfIsdnSwitchX25D 1.3.6.1.4.1.18.3.5.9.8.6.1.10 integer read-write
Enable this attribute to support the X25 over ISDN D channel feature. Enumeration: 'disabled': 2, 'enabled': 1.
         wfIsdnSwitchAllowedScreeningBits 1.3.6.1.4.1.18.3.5.9.8.6.1.11 integer read-write
Set this attribute to the value of the screening bits that is allowed in the incoming calling number IE. Only a calling number with screening bits matching this attribute will be recognised, all others will be ignored. If this attribute is disabled, the first calling number found will be used.
         wfIsdnSwitchPreauthTodCheck 1.3.6.1.4.1.18.3.5.9.8.6.1.12 integer read-write
Enable this attribute to attempt to identify whether a caller is outside of a valid TOD window using the calling number, before accepting the call. Enumeration: 'disabled': 2, 'enabled': 1.
 wfIsdnCallInfoTable 1.3.6.1.4.1.18.3.5.9.8.7 no-access
Call Information Table - contains data pertinent to a an active call, both incoming and outgoing, indexed by an internally generated call reference number.
     wfIsdnCallInfoEntry 1.3.6.1.4.1.18.3.5.9.8.7.1 no-access
An entry in the ISDN Call Info Table
         wfIsdnCallInfoSlot 1.3.6.1.4.1.18.3.5.9.8.7.1.1 integer read-only
The slot this call resides on
         wfIsdnCallInfoDslID 1.3.6.1.4.1.18.3.5.9.8.7.1.2 integer read-only
Digital Subscriber Loop (DSL) this call resides on
         wfIsdnCallInfoCallID 1.3.6.1.4.1.18.3.5.9.8.7.1.3 integer read-only
Call ID instance identifier - numbers in the range 0x0000 - 0x7FFF are assigned to incoming calls, 0x8000 - 0xFFFF are assigned to outgoing calls - this is used as a handle to manage an active call
         wfIsdnCallInfoBChannel 1.3.6.1.4.1.18.3.5.9.8.7.1.4 integer read-only
B Channel this call resides on
         wfIsdnCallInfoCallState 1.3.6.1.4.1.18.3.5.9.8.7.1.5 integer read-only
Line Manager Call State
         wfIsdnCallInfoTransferCap 1.3.6.1.4.1.18.3.5.9.8.7.1.6 integer read-only
Transfer Capability value from the Bearer Capability Information Element Enumeration: 'udi': 8, 'rdi': 9.
         wfIsdnCallInfoCalledPtyNum 1.3.6.1.4.1.18.3.5.9.8.7.1.7 displaystring read-only
Called Party Number
         wfIsdnCallInfoCallingPtyNum 1.3.6.1.4.1.18.3.5.9.8.7.1.8 displaystring read-only
Calling Party Number
         wfIsdnCallInfoDuration 1.3.6.1.4.1.18.3.5.9.8.7.1.9 integer read-only
Duration of the call in minutes
         wfIsdnCallInfoConnectTime 1.3.6.1.4.1.18.3.5.9.8.7.1.10 integer read-only
Start time of the call (HHMMSS)
         wfIsdnCallInfoRateAdaption 1.3.6.1.4.1.18.3.5.9.8.7.1.11 integer read-only
Rate adaption for this call in KBPS
         wfIsdnCallInfoCalledPtySub 1.3.6.1.4.1.18.3.5.9.8.7.1.12 displaystring read-only
Called Party Subaddress
         wfIsdnCallInfoCallingPtySub 1.3.6.1.4.1.18.3.5.9.8.7.1.13 displaystring read-only
Calling Party Subaddress
         wfIsdnCallInfoChanType 1.3.6.1.4.1.18.3.5.9.8.7.1.14 integer read-only
ISDN call channel type: B Channel or Multirate Enumeration: 'bchannel': 1, 'multirate': 2.
         wfIsdnCallInfoAggrChanCnt 1.3.6.1.4.1.18.3.5.9.8.7.1.15 integer read-only
PRI Multirate call's aggreated channel count
         wfIsdnCallInfoTimeslotMask 1.3.6.1.4.1.18.3.5.9.8.7.1.16 integer read-only
Timeslots used by a PRI Multirate call
         wfIsdnCallInfoCct 1.3.6.1.4.1.18.3.5.9.8.7.1.17 integer read-write
Circuit using this call
 wfIsdnBriInterfaceTable 1.3.6.1.4.1.18.3.5.9.8.9 no-access
ISDN BRI D Channel MIB Record
     wfIsdnBriInterfaceEntry 1.3.6.1.4.1.18.3.5.9.8.9.1 no-access
An entry in the ISDN table
         wfIsdnBriDelete 1.3.6.1.4.1.18.3.5.9.8.9.1.1 integer read-write
Create/Delete parameter Enumeration: 'deleted': 2, 'created': 1.
         wfIsdnBriDisable 1.3.6.1.4.1.18.3.5.9.8.9.1.2 integer read-write
Enable/Disable parameter Enumeration: 'disabled': 2, 'enabled': 1.
         wfIsdnBriState 1.3.6.1.4.1.18.3.5.9.8.9.1.3 integer read-only
Line Driver state variable, Not Present, Init, Down, Up Enumeration: 'down': 2, 'init': 3, 'ubcwaiting': 10, 'up': 1, 'notpresent': 20.
         wfIsdnBriSlot 1.3.6.1.4.1.18.3.5.9.8.9.1.4 integer read-only
Instance ID Slot, filled in by driver.
         wfIsdnBriConnector 1.3.6.1.4.1.18.3.5.9.8.9.1.5 integer read-only
Instance ID Connector, filled in by driver. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 9 and 'connector' is defined in attribute 10 of this table. For non-ASN platforms this attribute is the physical connector number on the slot.
         wfIsdnBriCct 1.3.6.1.4.1.18.3.5.9.8.9.1.6 integer read-write
CCT number for this interface instance
         wfIsdnBriDslId 1.3.6.1.4.1.18.3.5.9.8.9.1.7 integer read-only
The ID of this DSL interface. This stands for 'Digital Subscriber Loop' which is the physical link from the TE (us) to the NT (switch).
         wfIsdnBriLineNumber 1.3.6.1.4.1.18.3.5.9.8.9.1.8 integer read-write
Line number for this line instance. This is assigned at configuration time and uniquely identifies this line
         wfIsdnBriModule 1.3.6.1.4.1.18.3.5.9.8.9.1.9 integer read-only
Module number for ASN platform, filled in by driver. For non-ASN platforms this attribute will not be used. Enumeration: 'four': 4, 'three': 3, 'two': 2, 'one': 1.
         wfIsdnBriActualConnector 1.3.6.1.4.1.18.3.5.9.8.9.1.10 integer read-only
Actual connector number for ASN platform, filled in by driver. For non-ASN platforms, this attribute will not be used. Enumeration: 'four': 4, 'three': 3, 'two': 2, 'one': 1.
         wfIsdnBriTeState 1.3.6.1.4.1.18.3.5.9.8.9.1.11 integer read-only
State of the S/T interface from the routers point of view. These states correspond to those described in the CCITT I.430 recommendation and with those described with relation to the ISAC-S. Enumeration: 'synchronized': 6, 'deactivated': 3, 'activated': 7, 'inactive': 1, 'awaitsignal': 4, 'lostframing': 8, 'sensing': 2, 'identifyinput': 5.
         wfIsdnBriMtu 1.3.6.1.4.1.18.3.5.9.8.9.1.12 integer read-write
Contains the largest frame size that can be received by this interface. Anything larger than the MTU will be discarded.
         wfIsdnBriBChanLoop 1.3.6.1.4.1.18.3.5.9.8.9.1.13 integer read-write
This allows us to put the B Channels into loopback at the physical interface. This is usually used for Layer 1 conformance testing. Enumeration: 'disabled': 2, 'enabled': 1.
         wfIsdnBriTimer3Tmo 1.3.6.1.4.1.18.3.5.9.8.9.1.14 integer read-write
Indicates the amount of time in seconds for our T3 timer. The T3 timer is initiated by the host (i.e. the router). The T3 timer is started whenever the S/T interface is in a deactivated state and the host (i.e. the Router) wishes to activate the interface. As an example, for our application, the Router would activate the interface when there was data to be transmitted out that interface. At the point when we try activating the interface, the T3 timer is started. During the duration of the T3 timer, the router in trying to activate the interface will transmit INFO 1's out the S/T interface until either a signal is detected (from the network) or the T3 timer expires.
         wfIsdnBriTimer4Tmo 1.3.6.1.4.1.18.3.5.9.8.9.1.15 integer read-write
Indicates the amount of time in milliseconds for our T4 timer. The T4 timer is a debounce timer which is used to shield the upper layers from short glitches at the S/T interface. Spurious problems of short duration will not be reported to the upper layers until the T4 timer expires. The T4 timer is started when leaving state F7 or F8 upon the reception of INFO 0. The corresponding Deactivation Indication will be delivered to layer 2 only if layer 1 does not enter an active state before expiration of this timer. (Note that a value of 0 indicates the timer is disabled).
         wfIsdnBriRxOctets 1.3.6.1.4.1.18.3.5.9.8.9.1.16 counter read-only
Number of octets received without error
         wfIsdnBriRxFrames 1.3.6.1.4.1.18.3.5.9.8.9.1.17 counter read-only
Number of frames received without error
         wfIsdnBriTxOctets 1.3.6.1.4.1.18.3.5.9.8.9.1.18 counter read-only
Number of octets transmitted without error
         wfIsdnBriTxFrames 1.3.6.1.4.1.18.3.5.9.8.9.1.19 counter read-only
Number of frames transmitted without error
         wfIsdnBriRxErrors 1.3.6.1.4.1.18.3.5.9.8.9.1.20 counter read-only
Total number of receive errors
         wfIsdnBriTxErrors 1.3.6.1.4.1.18.3.5.9.8.9.1.21 counter read-only
Total number of transmission errors
         wfIsdnBriRxLackRescs 1.3.6.1.4.1.18.3.5.9.8.9.1.22 counter read-only
Number of times a receive packet was discarded because there was no receive descriptor available.
         wfIsdnBriTxLackRescs 1.3.6.1.4.1.18.3.5.9.8.9.1.23 counter read-only
Number of frames clipped in driver's transmit routine due to transmit congestion.
         wfIsdnBriTxUnderFlows 1.3.6.1.4.1.18.3.5.9.8.9.1.24 counter read-only
Number of transmission underflows, device FIFO went empty before driver could replenish with more data
         wfIsdnBriTxDChanCollisions 1.3.6.1.4.1.18.3.5.9.8.9.1.25 counter read-only
Number of times a collison occurred on the S-Bus transmitting a frame greater than 32 bytes, so frame had to be retransmitted
         wfIsdnBriRxOverFlows 1.3.6.1.4.1.18.3.5.9.8.9.1.26 counter read-only
Number of receive overflows, device FIFO overflowed before the driver was able to read/empty the FIFO.
         wfIsdnBriRxTooLongFrames 1.3.6.1.4.1.18.3.5.9.8.9.1.27 counter read-only
Number of frames received which were larger than the defined MTU
         wfIsdnBriRxBadCrcs 1.3.6.1.4.1.18.3.5.9.8.9.1.28 counter read-only
Number of bad receive frames caused by FCS errors
         wfIsdnBriRxAborts 1.3.6.1.4.1.18.3.5.9.8.9.1.29 counter read-only
Number of aborted frames due to being non octet aligned (i.e seven one's in a row received)
         wfIsdnBriRxReplenMisses 1.3.6.1.4.1.18.3.5.9.8.9.1.30 counter read-only
Number of packet buffer misses while attempting to replenish driver receive descriptor ring.
         wfIsdnBriTimer3Timeouts 1.3.6.1.4.1.18.3.5.9.8.9.1.31 counter read-only
Number of Timer 3 timeout's detected. This indicates the number of times the Router tried to activate the S/T interface without success.
         wfIsdnBriTimer4Timeouts 1.3.6.1.4.1.18.3.5.9.8.9.1.32 counter read-only
Number of Timer 4 timeout's detected. The T4 timer is started when leaving state F7 or F8 upon the reception of INFO 0. If layer 1 does not enter an active state before expiration of this timer, then a Deactivation Indication will be sent to layer 2.
         wfIsdnBriLineType 1.3.6.1.4.1.18.3.5.9.8.9.1.33 integer read-write
BRI line type can be either Multipoint (passive bus configuration with more than one device connected) or Point-to-Point with a single device attached. Enumeration: 'mtp': 2, 'ptp': 1.
         wfIsdnBriMode 1.3.6.1.4.1.18.3.5.9.8.9.1.34 integer read-write
This attribute controls the operation of the Basic Rate Interface. DIALUP is the traditional mode of operation in which call setup signalling is done in concert with the ISDN switch. LEASED is a special case of ISDN in which no signalling will be done with the switch and instead the switch is configured with nailed up connections to specific remote ISDN termination points. Enumeration: 'dialup': 1, 'leased': 2, 'floatb': 3.
         wfIsdnBriInterfaceType 1.3.6.1.4.1.18.3.5.9.8.9.1.35 integer read-only
Type of ISDN interface card being used. It can either be 'U' or 'S/T'. Enumeration: 'isdns': 1, 'isdn': 2.
         wfIsdnBriNtState 1.3.6.1.4.1.18.3.5.9.8.9.1.36 integer read-only
State of the U interface from the routers point of view. These states correspond to those described in the ANSI T1.601 recommendation and with those described in relation to the IEC-Q. Enumeration: 'synchronized2': 5, 'synchronized1': 4, 'receivereset': 3, 'pendreceivereset': 10, 'deactivated': 6, 'activated': 7, 'alerting': 2, 'error': 9, 'test': 8, 'fullreset': 1.
         wfIsdnBriTimerM4Tmo 1.3.6.1.4.1.18.3.5.9.8.9.1.37 integer read-write
Indicates the amount of time in seconds for our M4 timer. The M4 timer is initiated by the host (i.e. the router). The M4 timer is started whenever the host receives a wakeup signal from the U interface. During the duration of the M4 timer, the router in trying to activate the interface will respond with a TN signal followed with SN1 (optional) signal. The router will then receive SL1 from the U interface followed with SL2. Upon reception of SL2 signal, the router will respond with SN2. At this point the timer is stopped if it has not expired yet.
         wfIsdnBriTimerM6Tmo 1.3.6.1.4.1.18.3.5.9.8.9.1.38 integer read-write
Indicates the amount of time in milliseconds for our M6 timer. The M6 timer is initiated by the host (i.e. the router). The host has to complete the start-up sequence for the duration of the M6 timer. If it fails to do so, it will enter the receivereset state and remain in that state until it receives a wakeup signal from the U interface.
         wfIsdnBriX25D 1.3.6.1.4.1.18.3.5.9.8.9.1.39 integer read-write
enable/disable the X25 over ISDN D channel feature on the interface. Enumeration: 'disabled': 2, 'enabled': 1.
         wfIsdnBriX25DTeiType 1.3.6.1.4.1.18.3.5.9.8.9.1.40 integer read-write
TEI type used for the X25 over ISDN D channel feature. Enumeration: 'auto': 1, 'fixed': 2.
         wfIsdnBriX25DTeiValue 1.3.6.1.4.1.18.3.5.9.8.9.1.41 integer read-write
TEI value used for the X25 over ISDN D channel feature. 0 to 63 are for fixed TEI type and 127 for auto TEI type
 wfIsdnBChanInterfaceTable 1.3.6.1.4.1.18.3.5.9.8.10 no-access
ISDN Logical B channel MIB Record
       wfIsdnBChanInterfaceEntry 1.3.6.1.4.1.18.3.5.9.8.10.1 no-access
An entry in the ISDN table
           wfIsdnBChanDelete 1.3.6.1.4.1.18.3.5.9.8.10.1.1 integer read-write
Create/Delete parameter Enumeration: 'deleted': 2, 'created': 1.
           wfIsdnBChanLineNumber 1.3.6.1.4.1.18.3.5.9.8.10.1.2 integer read-only
line number for this line instance
           wfIsdnBChanIndex 1.3.6.1.4.1.18.3.5.9.8.10.1.3 integer read-only
a unique one up type number to create a list
           wfIsdnBChanDisable 1.3.6.1.4.1.18.3.5.9.8.10.1.4 integer read-write
Enable/Disable parameter Enumeration: 'disabled': 2, 'enabled': 1.
           wfIsdnBChanState 1.3.6.1.4.1.18.3.5.9.8.10.1.5 integer read-only
Line Driver state variable, Not Present, Init, Down, Up Enumeration: 'down': 2, 'init': 3, 'up': 1, 'notpresent': 4.
           wfIsdnBChanCct 1.3.6.1.4.1.18.3.5.9.8.10.1.6 integer read-write
CCT number for this interface instance
           wfIsdnBChanWanProtocol 1.3.6.1.4.1.18.3.5.9.8.10.1.7 integer read-write
WAN protocol selection is provided via this parameter. The supported protocols can be selected per interface. Enumeration: 'x25': 3, 'ppp': 1, 'framerelay': 2.
           wfIsdnBChanBackupPool 1.3.6.1.4.1.18.3.5.9.8.10.1.8 integer read-write
Backup pool id containing this line driver
           wfIsdnBChanDemandPool 1.3.6.1.4.1.18.3.5.9.8.10.1.9 integer read-write
Dial on demand pool id containing this line driver
           wfIsdnBChanDirectoryNum 1.3.6.1.4.1.18.3.5.9.8.10.1.10 displaystring read-write
Directory Number associated with the interface
           wfIsdnBChanSpid 1.3.6.1.4.1.18.3.5.9.8.10.1.11 displaystring read-write
Service Profile IDentifier - assigned by the Central Office on ordering ISDN service from a switch conforming to National ISDN.
           wfIsdnBChanActiveCct 1.3.6.1.4.1.18.3.5.9.8.10.1.12 integer read-only
CCT number for this interface instance
           wfIsdnBChanPriority 1.3.6.1.4.1.18.3.5.9.8.10.1.13 integer read-write
Priority associated with this ISDN B Channel
           wfIsdnBchanMultilineMode 1.3.6.1.4.1.18.3.5.9.8.10.1.14 integer read-write
This indicates the roll the B channel plays in a Bandwidth on Demand-Multiline Circuit. If this is not BOD, the mode is standard. Enumeration: 'slave': 3, 'secondary': 4, 'master': 2, 'standard': 1.
 wfIsdnPoolTable 1.3.6.1.4.1.18.3.5.9.8.11 no-access
ISDN Pool MIB Record
       wfIsdnPoolEntry 1.3.6.1.4.1.18.3.5.9.8.11.1 no-access
An entry in the Pool table
           wfIsdnPoolDelete 1.3.6.1.4.1.18.3.5.9.8.11.1.1 integer read-write
Create/Delete parameter Enumeration: 'deleted': 2, 'created': 1.
           wfIsdnPoolType 1.3.6.1.4.1.18.3.5.9.8.11.1.2 integer read-only
Type of Pool . Backup or Demand Enumeration: 'bandwidth': 3, 'backup': 2, 'demand': 1.
           wfIsdnPoolLineNumber 1.3.6.1.4.1.18.3.5.9.8.11.1.3 integer read-only
D channel line number associated with this pool instance
           wfIsdnPoolId 1.3.6.1.4.1.18.3.5.9.8.11.1.4 integer read-only
a unique pool ID
           wfIsdnPoolChannelCnt 1.3.6.1.4.1.18.3.5.9.8.11.1.5 integer read-write
Number of Channels allocated for this Pool
           wfIsdnPoolPriority 1.3.6.1.4.1.18.3.5.9.8.11.1.6 integer read-write
Priority of Lines in Pool
           wfIsdnPoolChannelInUse 1.3.6.1.4.1.18.3.5.9.8.11.1.7 integer read-only
Number of Channels in use from this Pool.
 wfIsdnLocalPhoneNumTable 1.3.6.1.4.1.18.3.5.9.8.12 no-access
ISDN Local phone number list
       wfIsdnLocalPhoneNumEntry 1.3.6.1.4.1.18.3.5.9.8.12.1 no-access
An entry in table
           wfIsdnLocalPhoneNumDelete 1.3.6.1.4.1.18.3.5.9.8.12.1.1 integer read-write
Delete this phone number from the list Enumeration: 'deleted': 2, 'created': 1.
           wfIsdnLocalPhoneNumLineNum 1.3.6.1.4.1.18.3.5.9.8.12.1.2 integer read-only
D Channel Line Number
           wfIsdnLocalPhoneNumIndex 1.3.6.1.4.1.18.3.5.9.8.12.1.3 integer read-only
a unique sequetial index to create a list
           wfIsdnLocalDirectoryNum 1.3.6.1.4.1.18.3.5.9.8.12.1.4 displaystring read-write
Directory Number (local phone number) assiciated with the interface
           wfIsdnLocalSubAddr 1.3.6.1.4.1.18.3.5.9.8.12.1.5 displaystring read-write
Local Phone Number, the sub address portion
           wfIsdnLocalSpid 1.3.6.1.4.1.18.3.5.9.8.12.1.6 displaystring read-write
Service Profile IDentifier - assigned by the Central Office on ordering ISDN service from a switch conforming to National ISDN.
           wfIsdnLocalAssignedChannel 1.3.6.1.4.1.18.3.5.9.8.12.1.7 integer read-write
for Swserv phone numbers, the delimiter portion Enumeration: 'channel2': 2, 'channel1': 1.
           wfIsdnLocalSpidStatus 1.3.6.1.4.1.18.3.5.9.8.12.1.8 integer read-only
The status of SPID registration Enumeration: 'accepted': 1, 'rejected': 2.
           wfIsdnLocalDirectoryNumType 1.3.6.1.4.1.18.3.5.9.8.12.1.9 integer read-write
For ISDN type number, it needs type of number UNKNOWN Type is 0, use 1 to satisfy MDL requirement This attribute value will be ANDED with 0xFFF0 before using it. Enumeration: 'subscriber': 64, 'abbreviated': 96, 'unknown': 1, 'national': 32, 'specific': 48, 'international': 16.
           wfIsdnLocalDirectoryNumPlan 1.3.6.1.4.1.18.3.5.9.8.12.1.10 integer read-write
If Isdn and if type of number is UNKNOWN or INERNATIONAL or NATIONAL or SUBSCRIBER then a plan number is needed. UNKNOWN is 0 , using 16 (0x10)to satisfy MDL requirement. We will AND this field with 0x0F before using it. Enumeration: 'unknown': 16, 'telex': 4, 'private': 9, 'standard': 8, 'telephony': 1, 'x121': 3.
           wfIsdnSpidRetries 1.3.6.1.4.1.18.3.5.9.8.12.1.11 integer read-write
Number of times the SPID registration request is sent to the ISDN switch
           wfIsdnSpidRetryAttempts 1.3.6.1.4.1.18.3.5.9.8.12.1.12 integer read-write
Number of times the SPID registration is re-envoked.
           wfIsdnSpidRetryTimer 1.3.6.1.4.1.18.3.5.9.8.12.1.13 integer read-write
Amount of time in seconds to wait before re-envoking SPID registration
           wfIsdnSpidResetBri 1.3.6.1.4.1.18.3.5.9.8.12.1.14 integer read-write
When enabled the ISDN BRI interface is reset after all the SPID registartion attempts fail, zero setting disables this functionality. When set to a nonzero N the interface will be reset if the total number of BRI interface resets on this slot is less than N.
 wfModemCommandTable 1.3.6.1.4.1.18.3.5.9.8.13 no-access
Modem Command String interface Entry
       wfModemCommandEntry 1.3.6.1.4.1.18.3.5.9.8.13.1 no-access
An entry in table
           wfModemCommandDelete 1.3.6.1.4.1.18.3.5.9.8.13.1.1 integer read-write
Delete this Modem Command Entry mib record Enumeration: 'deleted': 2, 'created': 1.
           wfModemCommandSlot 1.3.6.1.4.1.18.3.5.9.8.13.1.2 integer read-only
Instance ID Slot, filled in by driver
           wfModemCommandConnector 1.3.6.1.4.1.18.3.5.9.8.13.1.3 integer read-only
Instance ID Connector, filled in by driver Enumeration: 'seven': 7, 'six': 6, 'three': 3, 'two': 2, 'four': 4, 'five': 5, 'eight': 8, 'one': 1.
           wfModemCommandString 1.3.6.1.4.1.18.3.5.9.8.13.1.4 displaystring read-write
String to be passed to the modem to configure it. Syntax of the string is not checked