Wellfleet-IPXA-MIB: View SNMP OID List / Download MIB

VENDOR: WELLFLEET


 Home MIB: Wellfleet-IPXA-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Wellfleet-COMMON-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wfIpxBasicSysTable 1.3.6.1.4.1.18.3.5.5.15 no-access
Wellfleet IPX Basic System Table
       wfIpxBasicSysEntry 1.3.6.1.4.1.18.3.5.5.15.1 no-access
An entry in the IPX Circ Table
           wfIpxBasicSysDelete 1.3.6.1.4.1.18.3.5.5.15.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete IPX. Enumeration: 'deleted': 2, 'created': 1.
           wfIpxBasicSysDisable 1.3.6.1.4.1.18.3.5.5.15.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable IPX. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxBasicSysState 1.3.6.1.4.1.18.3.5.5.15.1.3 integer read-only
The current state of the entire IPX Router. Enumeration: 'down': 2, 'init': 3, 'up': 1, 'notpresent': 4.
           wfIpxBasicSysInstance 1.3.6.1.4.1.18.3.5.5.15.1.4 integer read-only
The unique identifier for the instance of IPX.
           wfIpxBasicSysPrimaryNetworkNumber 1.3.6.1.4.1.18.3.5.5.15.1.5 octet string read-write
The 'internal' network number, used for IPXWAN
           wfIpxBasicSysMultipleHostAddresses 1.3.6.1.4.1.18.3.5.5.15.1.6 integer read-write
Allow the user to configure one host/mac addr for the whole box (default) where, if configured, the CfgHostAddress is used (becomes HostAddress) otherwise if left unconfigured the Host address is discerned from the backplane serial number. If Multiple host is Enabled and the host number is configured in the interface record the configured value is used as the hostid/mac addr of the interface (except Token Ring which can't go into promiscous mode, uses Token Ring Mac as hostid/mac of interface). If the host number in left unconfigured then the hostid/mac is gotten from the mac of the circuit. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxBasicSysCfgHostAddress 1.3.6.1.4.1.18.3.5.5.15.1.7 octet string read-write
Host Number of Router and potential MAC address of box. This host number will be used to overide the default box generated host address.
           wfIpxBasicSysHostAddress 1.3.6.1.4.1.18.3.5.5.15.1.8 octet string read-only
Host Number of Router and potential MAC address of box. This is not a restart variable because this will be filled in from the IPX code after reading it from either the configurable host number or from a box generated variable.
           wfIpxBasicSysRouterName 1.3.6.1.4.1.18.3.5.5.15.1.9 displaystring read-write
The Name of the Router, used for IPXWAN
           wfIpxBasicSysInReceives 1.3.6.1.4.1.18.3.5.5.15.1.10 counter read-only
The total number of IPX packets received, including errors
           wfIpxBasicSysInHdrErrors 1.3.6.1.4.1.18.3.5.5.15.1.11 counter read-only
The number of IPX packets discarded due to errors in their headers, including any IPX packet with a size less than the minimum of 30 bytes
           wfIpxBasicSysInUnknownSockets 1.3.6.1.4.1.18.3.5.5.15.1.12 counter read-only
The number of IPX packets discarded because the destination was the router and the socket was not known
           wfIpxBasicSysInDiscards 1.3.6.1.4.1.18.3.5.5.15.1.13 counter read-only
The number of IPX packets received but discarded due to reasons other than those accounted for by wfIpxBasicSysInHdrErrors , wfIpxBasicSysInUnknownSockets, wfIpxBasicSysAdvSysInDiscards, and wfIpxAdvSysInCompressDiscards
           wfIpxBasicSysInBadChecksums 1.3.6.1.4.1.18.3.5.5.15.1.14 counter read-only
The number of IPX packets received with incorrect checksums
           wfIpxBasicSysInDelivers 1.3.6.1.4.1.18.3.5.5.15.1.15 counter read-only
The number of IPX packets delivered locally
           wfIpxBasicSysNoRoutes 1.3.6.1.4.1.18.3.5.5.15.1.16 counter read-only
The number of times no route to a destination was found
           wfIpxBasicSysOutRequests 1.3.6.1.4.1.18.3.5.5.15.1.17 counter read-only
The number of IPX packets supplied locally for transmission, not including any packets counted in wfIpxAdvSysForwPackets
           wfIpxBasicSysOutMalformedRequests 1.3.6.1.4.1.18.3.5.5.15.1.18 counter read-only
The number of outgoing IPX packets discarded due to reasons other than those accounted for in wfIpxBasicSysOutMalformedRequest, wfIpxAdvSysOutFiltered, and wfIpxAdvSysOutCompressDiscards
           wfIpxBasicSysOutPackets 1.3.6.1.4.1.18.3.5.5.15.1.19 counter read-only
The total number of IPX packets transmitted
           wfIpxBasicSysOpenEncapsFails 1.3.6.1.4.1.18.3.5.5.15.1.20 counter read-only
The number of IPX encaps open calls which failed
           wfIpxBasicSysOutDiscards 1.3.6.1.4.1.18.3.5.5.15.1.21 counter read-only
The number of outgoing IPX packets discarded due to reasons other than those accounted for by wfIpxBasicSysOutMalformedRequests, wfIpxBasicSysAdvSysOutFiltered, and wfIpxAdvSysOutCompressDiscards
 wfIpxAdvSysTable 1.3.6.1.4.1.18.3.5.5.16 no-access
Wellfleet IPX Advanced System Table
       wfIpxAdvSysEntry 1.3.6.1.4.1.18.3.5.5.16.1 no-access
An entry in the IPX Circ Table
           wfIpxAdvSysDelete 1.3.6.1.4.1.18.3.5.5.16.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the IPX advanced system group. Enumeration: 'deleted': 2, 'created': 1.
           wfIpxAdvSysInstance 1.3.6.1.4.1.18.3.5.5.16.1.2 integer read-only
The unique identifier for the instance of IPX.
           wfIpxAdvSysRoutingMethod 1.3.6.1.4.1.18.3.5.5.16.1.3 integer read-write
Choose either Tick or Hop based routing Enumeration: 'tick': 2, 'hop': 1.
           wfIpxAdvSysLogFilter 1.3.6.1.4.1.18.3.5.5.16.1.4 integer read-write
Filter out some log messages, Default filters out trace messages. Enumeration: 'info': 2, 'trace': 16, 'infotrace': 18, 'debuginfo': 3, 'debugtrace': 17, 'debug': 1, 'debuginfotrace': 19.
           wfIpxAdvSysMaximumPath 1.3.6.1.4.1.18.3.5.5.16.1.5 integer read-write
Declare Maximum number of paths stored for a given destination network
           wfIpxAdvSysMaxPathSplits 1.3.6.1.4.1.18.3.5.5.16.1.6 integer read-write
A non-zero value enables load sharing between equal cost paths with the best metric when forwarding packets
           wfIpxAdvSysMaxHops 1.3.6.1.4.1.18.3.5.5.16.1.7 integer read-write
The maximum number of hops a packet may take
           wfIpxAdvSysInTooManyHops 1.3.6.1.4.1.18.3.5.5.16.1.8 counter read-only
The number of IPX packets discarded due to exceeding the maximum hop count.
           wfIpxAdvSysInFiltered 1.3.6.1.4.1.18.3.5.5.16.1.9 counter read-only
The number of incoming IPX packets discarded due to filtering, not including those counted in wfIpxTrafficFilterCounter
           wfIpxAdvSysInCompressDiscards 1.3.6.1.4.1.18.3.5.5.16.1.10 counter read-only
Then number of incoming IPX packets discarded due to decompression errors.
           wfIpxAdvSysNETBIOSPackets 1.3.6.1.4.1.18.3.5.5.16.1.11 counter read-only
The number of NETBIOS packets received
           wfIpxAdvSysForwPackets 1.3.6.1.4.1.18.3.5.5.16.1.12 counter read-only
The number of IPX packets forwarded
           wfIpxAdvSysOutFiltered 1.3.6.1.4.1.18.3.5.5.16.1.13 counter read-only
The number of outgoing IPX packets discarded due to filtering
           wfIpxAdvSysOutCompressDiscards 1.3.6.1.4.1.18.3.5.5.16.1.14 counter read-only
The number of outgoing IPX packets discarded due to compression errors
           wfIpxAdvSysNovellCertificationConformanceDisable 1.3.6.1.4.1.18.3.5.5.16.1.15 integer read-write
enable/disable Novell certification, disable/enable Wellfleet specifics Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxAdvSysCircCount 1.3.6.1.4.1.18.3.5.5.16.1.16 counter read-only
The number of IPX Circuits (interfaces).
           wfIpxAdvSysCfgDestCount 1.3.6.1.4.1.18.3.5.5.16.1.17 integer read-write
A value indicating the maximum destinations (networks) that the user expects the router to learn. This is used to pre-allocate table sizes for network tables. Changing this value can greatly effect the memory used by IPX, however it can also speed learning times.
           wfIpxAdvSysDestCount 1.3.6.1.4.1.18.3.5.5.16.1.18 counter read-only
The number of currently reachable destinations known to IPX
           wfIpxAdvSysCfgServCount 1.3.6.1.4.1.18.3.5.5.16.1.19 integer read-write
A value indicating the maximum services that the user expects the router to learn. This is used to pre-allocate table sizes for service tables. Changing this value can greatly effect the memory used by IPX, however it can also speed learning times.
           wfIpxAdvSysServCount 1.3.6.1.4.1.18.3.5.5.16.1.20 counter read-only
The number of currently reachable services known to IPX
           wfIpxAdvSysCfgHostCount 1.3.6.1.4.1.18.3.5.5.16.1.21 integer read-write
A value indicating the maximum next hop hosts that the user expects the router to learn. This is used to pre-allocate table sizes for host tables. Changing this value can greatly effect the memory used by IPX, however it can also speed learning times.
           wfIpxAdvSysHostCount 1.3.6.1.4.1.18.3.5.5.16.1.22 counter read-only
The number of currently reachable hosts known to IPX
           wfIpxAdvSysAgingFrequency 1.3.6.1.4.1.18.3.5.5.16.1.23 integer read-write
The frequency, in seconds, for aging RIP and SAP information.
           wfIpxAdvSysAgingPendingFrequency 1.3.6.1.4.1.18.3.5.5.16.1.24 integer read-write
The number of routes and services to age before pending.
           wfIpxAdvSysDefaultRouteEnable 1.3.6.1.4.1.18.3.5.5.16.1.25 integer read-write
This parameter indicates whether or not default route is used for unknown networks. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxAdvSysSapViaDefaultRouteEnable 1.3.6.1.4.1.18.3.5.5.16.1.26 integer read-write
This parameter indicates whether or not a SAP advertisement can be learned from an interface if the network number advertised in the SAP advertisement is unreachable but default route is accessible from that interface. Note that the router may not be compatible with other router implementations when this feature is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxAdvSysCT 1.3.6.1.4.1.18.3.5.5.16.1.27 integer read-write
The NLSP Certification Test compatibility flag. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxAdvSysMibReplySlots 1.3.6.1.4.1.18.3.5.5.16.1.28 displaystring read-write
The slots running IPX which should reply to MIB Proxy requests
           wfIpxAdvSysGNSRespMode 1.3.6.1.4.1.18.3.5.5.16.1.29 integer read-write
Algorithm used to determine the server to choose when responding to a Get Nearest Server Request Enumeration: 'alphabetical': 1, 'lastlearned': 2.
           wfIpxAdvSysMaxNetTblSize 1.3.6.1.4.1.18.3.5.5.16.1.30 integer read-write
maximum allowed size of the network table
           wfIpxAdvSysNetTblFillNotify 1.3.6.1.4.1.18.3.5.5.16.1.31 integer read-write
notify when (configured) percentage is reached
           wfIpxAdvSysGlobalTrigUpdate 1.3.6.1.4.1.18.3.5.5.16.1.32 integer read-write
enable/disable triggered rip/sap updates box wide. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxAdvSysTrigUpdateDelay 1.3.6.1.4.1.18.3.5.5.16.1.33 integer read-write
Delay before performing immediate update (10ths)
           wfIpxAdvSysLostRouteDelay 1.3.6.1.4.1.18.3.5.5.16.1.34 integer read-write
Delay before performing lost route algorithm (10ths)
 wfIpxCircTable 1.3.6.1.4.1.18.3.5.5.17 no-access
Wellfleet IPX Circuit Table
       wfIpxCircEntry 1.3.6.1.4.1.18.3.5.5.17.1 no-access
An entry in the IPX Circuit Table
           wfIpxCircDelete 1.3.6.1.4.1.18.3.5.5.17.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this entry. Enumeration: 'deleted': 2, 'created': 1.
           wfIpxCircDisable 1.3.6.1.4.1.18.3.5.5.17.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an entry. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxCircState 1.3.6.1.4.1.18.3.5.5.17.1.3 integer read-only
The current state of this entry Enumeration: 'down': 2, 'init': 3, 'up': 1, 'notpresent': 4.
           wfIpxCircSysInstance 1.3.6.1.4.1.18.3.5.5.17.1.4 integer read-only
The unique identifier of the instance of IPX to which this entry corresponds.
           wfIpxCircIndex 1.3.6.1.4.1.18.3.5.5.17.1.5 integer read-only
The identifier of this circuit, unique within the instance of RIP. This value corresponds to the IPX circuit identifier found in wfIpxCircIndex.
           wfIpxCircIfIndex 1.3.6.1.4.1.18.3.5.5.17.1.6 integer read-write
The identifier of the DP circuit to which this IPX circuit is linked.
           wfIpxCircName 1.3.6.1.4.1.18.3.5.5.17.1.7 displaystring read-write
The Name of this IPX circuit
           wfIpxCircCfgType 1.3.6.1.4.1.18.3.5.5.17.1.8 integer read-write
The type assigned by the user to this IPX circuit. To enable IPXWAN negotiations on this (WAN) circuit, set one or more of WAN_RIP, UNNUMBERED_RIP, and WAN_NLSP. Enumeration: 'unnumberedrip': 16, 'pt': 4, 'wanrip': 8, 'dynamic': 32, 'broadcast': 2, 'other': 1, 'ws': 64, 'nlsp': 128.
           wfIpxCircLocalMaxPacketSize 1.3.6.1.4.1.18.3.5.5.17.1.9 integer read-only
The maximum size (including header), in bytes that the media supports on this DP circuit.
           wfIpxCircCfgCompressState 1.3.6.1.4.1.18.3.5.5.17.1.10 integer read-write
The configured compression state of this IPX circuit. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxCircCompressState 1.3.6.1.4.1.18.3.5.5.17.1.11 integer read-only
The actual compression state on this IPX circuit. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxCircCompressSlots 1.3.6.1.4.1.18.3.5.5.17.1.12 integer read-write
The number of compression slots available on this circuit.
           wfIpxCircCompressedSent 1.3.6.1.4.1.18.3.5.5.17.1.13 counter read-only
The number of compressed packets sent.
           wfIpxCircCompressedInitSent 1.3.6.1.4.1.18.3.5.5.17.1.14 counter read-only
The number of compression initialization packets sent.
           wfIpxCircCompressedRejectsSent 1.3.6.1.4.1.18.3.5.5.17.1.15 counter read-only
The number of compressed packet rejected packets sent.
           wfIpxCircUncompressedSent 1.3.6.1.4.1.18.3.5.5.17.1.16 counter read-only
The number of uncompressed packets sent without being compressed even though compression was turned on for this IPX circuit.
           wfIpxCircCompressedReceived 1.3.6.1.4.1.18.3.5.5.17.1.17 counter read-only
The number of compressed packets received.
           wfIpxCircCompressedInitReceived 1.3.6.1.4.1.18.3.5.5.17.1.18 counter read-only
The number of compression initialization packets received.
           wfIpxCircCompressedRejectsReceived 1.3.6.1.4.1.18.3.5.5.17.1.19 counter read-only
The number of compressed packet rejected packets received.
           wfIpxCircUncompressedReceived 1.3.6.1.4.1.18.3.5.5.17.1.20 counter read-only
The number of packets received without having been compressed even though compression was turned on for this IPX circuit.
           wfIpxCircMediaType 1.3.6.1.4.1.18.3.5.5.17.1.21 integer read-only
The media type used on this IPX circuit.
           wfIpxCircCfgNetworkNumber 1.3.6.1.4.1.18.3.5.5.17.1.22 octet string read-write
The IPX network number assigned by the user to this IPX circuit.
           wfIpxCircNetworkNumber 1.3.6.1.4.1.18.3.5.5.17.1.23 octet string read-only
The IPX network number of this IPX circuit.
           wfIpxCircCommonNetworkNumber 1.3.6.1.4.1.18.3.5.5.17.1.24 octet string read-write
The IPX common network number assigned to this IPX circuit.
           wfIpxCircCfgHostAddress 1.3.6.1.4.1.18.3.5.5.17.1.25 octet string read-write
The IPX Host Address assigned by the user to this IPX circuit.
           wfIpxCircHostAddress 1.3.6.1.4.1.18.3.5.5.17.1.26 octet string read-only
The IPX Host Address of this IPX circuit.
           wfIpxCircMacAddress 1.3.6.1.4.1.18.3.5.5.17.1.27 octet string read-only
The IPX Host Address of this IPX circuit.
           wfIpxCircCfgBroadcastAddress 1.3.6.1.4.1.18.3.5.5.17.1.28 octet string read-write
The Broadcast Address assigned by the user to this IPX circuit.
           wfIpxCircBroadcastAddress 1.3.6.1.4.1.18.3.5.5.17.1.29 octet string read-only
The Broadcast Address of this IPX circuit.
           wfIpxCircCfgMulticastAddress 1.3.6.1.4.1.18.3.5.5.17.1.30 octet string read-write
The Multicast Address assigned by the user to this IPX circuit.
           wfIpxCircMulticastAddress 1.3.6.1.4.1.18.3.5.5.17.1.31 octet string read-only
The Multicast Address of this IPX circuit.
           wfIpxCircStateChanges 1.3.6.1.4.1.18.3.5.5.17.1.32 counter read-only
The number of times this IPX circuit has changed state.
           wfIpxCircInitFails 1.3.6.1.4.1.18.3.5.5.17.1.33 counter read-only
The number of times that initialization of this circuit has failed.
           wfIpxCircDelay 1.3.6.1.4.1.18.3.5.5.17.1.34 integer read-only
The period of time, in microseconds, that it takes to transmit one byte of data, excluding protocol headers, to a destination on the other end of this IPX circuit, if the IPX circuit is free of other traffic. This value will be filled in by IPX to be either the value configured or a computed value.
           wfIpxCircThroughput 1.3.6.1.4.1.18.3.5.5.17.1.35 integer read-only
The amount of data, in bits per second, that may flow through this IPX circuit if there is no other traffic. This value will be filled in by IPX to be either the value configured or a computed value.
           wfIpxCircNeighRouterName 1.3.6.1.4.1.18.3.5.5.17.1.36 displaystring read-only
The name of the neighboring router on a IPXWAN circuit.
           wfIpxCircNeighInternalNetNum 1.3.6.1.4.1.18.3.5.5.17.1.37 octet string read-only
The internal network number of the neighboring router on an IPXWAN circuit.
           wfIpxCircCost 1.3.6.1.4.1.18.3.5.5.17.1.38 integer read-write
The cost of this interface, in ticks or hops dependant on the wfIpxAdvSysRoutingMethod field.
           wfIpxCircChecksum 1.3.6.1.4.1.18.3.5.5.17.1.39 integer read-write
Whether or not to check checksums of packets coming into this IPX circuit. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxCircCfgEncaps 1.3.6.1.4.1.18.3.5.5.17.1.40 integer read-write
The encapsulation assigned by the user to this IPX circuit. Enumeration: 'lsap': 2, 'ethernet': 1, 'ppp': 5, 'novell': 3, 'snap': 4.
           wfIpxCircEncaps 1.3.6.1.4.1.18.3.5.5.17.1.41 integer read-only
The encapsulation used on this IPX circuit. Enumeration: 'lsap': 2, 'ethernet': 1, 'ppp': 5, 'novell': 3, 'snap': 4.
           wfIpxCircInTooManyHops 1.3.6.1.4.1.18.3.5.5.17.1.42 counter read-only
The number of IPX packets discarded due to exceeding the maximum hops count set for this IPX circuit.
           wfIpxCircInFiltered 1.3.6.1.4.1.18.3.5.5.17.1.43 counter read-only
The number of incoming IPX packets discarded due to filtering, not including those counted in wfIpxTrafficFilterCounter.
           wfIpxCircInHdrErrors 1.3.6.1.4.1.18.3.5.5.17.1.44 counter read-only
The number of IPX packets discarded due to errors in their headers, including any IPX packet with a size less than the minimum of 30 bytes.
           wfIpxCircInUnknownSockets 1.3.6.1.4.1.18.3.5.5.17.1.45 counter read-only
The number of IPX packets discarded because the destination socket was not known.
           wfIpxCircNETBIOSPackets 1.3.6.1.4.1.18.3.5.5.17.1.46 counter read-only
The number of NETBIOS packets received on this IPX circuit.
           wfIpxCircInBadChecksums 1.3.6.1.4.1.18.3.5.5.17.1.47 counter read-only
The number of IPX packets discarded because the checksum was incorrect.
           wfIpxCircInDelivers 1.3.6.1.4.1.18.3.5.5.17.1.48 counter read-only
The number of IPX packets delivered locally
           wfIpxCircInDiscards 1.3.6.1.4.1.18.3.5.5.17.1.49 counter read-only
The number of IPX packets received but discarded due to reasons other than those accounted for by wfIpxCircInHdrErrors, wfIpxCircInUnknownSockets
           wfIpxCircNoRoutes 1.3.6.1.4.1.18.3.5.5.17.1.50 counter read-only
The number of times no route to a destination was found.
           wfIpxCircOutRequests 1.3.6.1.4.1.18.3.5.5.17.1.51 counter read-only
The number of IPX packets supplied locally for transmission.
           wfIpxCircOutMalformedRequests 1.3.6.1.4.1.18.3.5.5.17.1.52 counter read-only
The number of IPX packets supplied locally that contained errors in their structure.
           wfIpxCircOutDiscards 1.3.6.1.4.1.18.3.5.5.17.1.53 counter read-only
The number of outgoing IPX packets discarded due to reasons other than those accounted for in
           wfIpxCircOutFiltered 1.3.6.1.4.1.18.3.5.5.17.1.54 counter read-only
The number of outgoing IPX packets diecarded due to filtering.
           wfIpxCircDestCount 1.3.6.1.4.1.18.3.5.5.17.1.55 counter read-only
The number of networks known to the IPX router from this IPX circuit.
           wfIpxCircServCount 1.3.6.1.4.1.18.3.5.5.17.1.56 counter read-only
The number of services known to the IPX router from this IPX circuit.
           wfIpxCircHostCount 1.3.6.1.4.1.18.3.5.5.17.1.57 counter read-only
The number of hosts known to the IPX router from this IPX circuit.
           wfIpxCircForwardCount 1.3.6.1.4.1.18.3.5.5.17.1.58 counter read-only
The number of forward entries in the IPX router forwarding table for this IPX circuit.
           wfIpxCircTrEndStation 1.3.6.1.4.1.18.3.5.5.17.1.59 integer read-write
Whether or not to do Source Routing, only valid on token ring media. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxCircNetbiosAccept 1.3.6.1.4.1.18.3.5.5.17.1.60 integer read-write
Accept NetBios All Networks Broadcast Packets Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxCircNetbiosDeliver 1.3.6.1.4.1.18.3.5.5.17.1.61 integer read-write
Deliver NetBios All Networks Broadcast Packets Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxCircSMDSIndividualAddress 1.3.6.1.4.1.18.3.5.5.17.1.62 octet string read-write
The SMDS individual address for this IPX circuit.
           wfIpxCircType 1.3.6.1.4.1.18.3.5.5.17.1.63 integer read-only
The type of the circuit. If IPXWAN was enabled on this circuit, this attribute will indicate the negotiated routing type. Enumeration: 'unnumberedrip': 5, 'pt': 3, 'wanrip': 4, 'dynamic': 6, 'broadcast': 2, 'other': 1, 'ws': 7, 'nlsp': 8.
           wfIpxCircWatchdogSpoof 1.3.6.1.4.1.18.3.5.5.17.1.64 integer read-write
Whether or not to do Watchdog Spoofing. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxCircIPXOutWatchdogSpoofRsps 1.3.6.1.4.1.18.3.5.5.17.1.65 counter read-only
The number of Watchdog response packets sent to IPX servers in response to Watchdog queries.
           wfIpxCircCfgDelay 1.3.6.1.4.1.18.3.5.5.17.1.66 integer read-write
The period of time, in microseconds, that it takes to transmit one byte of data, excluding protocol headers, to a destination on the other end of this IPX circuit, if the IPX circuit is free of other traffic. This value is assigned by the user.
           wfIpxCircCfgThroughput 1.3.6.1.4.1.18.3.5.5.17.1.67 integer read-write
The amount of data, in bits per second, that may flow through this IPX circuit if there is no other traffic. This value is assigned by the user.
           wfIpxCircSPXOutWatchdogSpoofRsps 1.3.6.1.4.1.18.3.5.5.17.1.68 counter read-only
The number of SPX Watchdog response packets sent to SPX endpoint in response to Watchdog requests.
           wfIpxCircInitStabilizationTimer 1.3.6.1.4.1.18.3.5.5.17.1.69 integer read-write
The circuit RIP/SAP start delay timer to allow routes to stabilize, in seconds
           wfIpxCircSVCBroadcast 1.3.6.1.4.1.18.3.5.5.17.1.70 integer read-write
Enable if Frame Relay SVCs should be established for all adjacent hosts before sending RIP and SAP updates. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxCircVRRPTriggerState 1.3.6.1.4.1.18.3.5.5.17.1.71 integer read-only
Indicates whether VRRP subsystem wants this IPX Intf to be enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
 wfIpxDestEntryTable 1.3.6.1.4.1.18.3.5.5.18 no-access
IPX Dest table, contains information about all known destinations.
       wfIpxDestEntry 1.3.6.1.4.1.18.3.5.5.18.1 no-access
Destination table contains information about all known destinations
           wfIpxDestSysInstance 1.3.6.1.4.1.18.3.5.5.18.1.1 integer read-only
The unique identifier of the instance of IPX to which this entry corresponds.
           wfIpxDestNetNum 1.3.6.1.4.1.18.3.5.5.18.1.2 octet string read-only
The identifier of this circuit, unique within the instance. This value corresponds to the IPX circuit identifier found in wfIpxCircIndex.
           wfIpxDestProtocol 1.3.6.1.4.1.18.3.5.5.18.1.3 integer read-only
The routing protocol from which knowledge of this destination was obtained. Enumeration: 'static': 5, 'other': 1, 'local': 2, 'rip': 3, 'nlsp': 4.
           wfIpxDestTicks 1.3.6.1.4.1.18.3.5.5.18.1.4 integer read-only
The delay in ticks to reach this destination.
           wfIpxDestHopCount 1.3.6.1.4.1.18.3.5.5.18.1.5 integer read-only
The number of hops necessary to reach the destination.
           wfIpxDestNextHopCircIndex 1.3.6.1.4.1.18.3.5.5.18.1.6 integer read-only
The unique identifier of the IPX circuit used to reach the next hop.
           wfIpxDestNextHopHostAddress 1.3.6.1.4.1.18.3.5.5.18.1.7 octet string read-only
The Host address of the Next Hop.
           wfIpxDestNextHopNetNum 1.3.6.1.4.1.18.3.5.5.18.1.8 octet string read-only
The IPX network number of the next hop.
           wfIpxDestAge 1.3.6.1.4.1.18.3.5.5.18.1.9 integer read-only
The current age of this entry, in seconds. Local, Static, and NLSP destinations are not aged.
 wfIpxUserStaticRouteEntryTable 1.3.6.1.4.1.18.3.5.5.19 no-access
Wellfleet IPX Static Route Table
       wfIpxUserStaticRouteEntry 1.3.6.1.4.1.18.3.5.5.19.1 no-access
The Static Routes table contains information about all destinations reached via user statically configured routes.
           wfIpxUserStaticRouteDelete 1.3.6.1.4.1.18.3.5.5.19.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this entry. Enumeration: 'deleted': 2, 'created': 1.
           wfIpxUserStaticRouteDisable 1.3.6.1.4.1.18.3.5.5.19.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an entry. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxUserStaticRouteSysInstance 1.3.6.1.4.1.18.3.5.5.19.1.3 integer read-only
The unique identifier of the instance of IPX to which this entry corresponds.
           wfIpxUserStaticRouteCircIndex 1.3.6.1.4.1.18.3.5.5.19.1.4 integer read-only
The identifier of this circuit, unique within the instance of RIP. This value corresponds to the IPX circuit identifier found in wfIpxCircIndex.
           wfIpxUserStaticRouteNetNum 1.3.6.1.4.1.18.3.5.5.19.1.5 octet string read-only
The network number of this static route.
           wfIpxUserStaticRouteTicks 1.3.6.1.4.1.18.3.5.5.19.1.6 integer read-write
The cost in ticks of this static route entry.
           wfIpxUserStaticRouteHopCount 1.3.6.1.4.1.18.3.5.5.19.1.7 integer read-write
The hop count to this static route.
           wfIpxUserStaticRouteNextHopHostAddress 1.3.6.1.4.1.18.3.5.5.19.1.8 octet string read-write
The next hop host address of this entry
 wfIpxAutoStaticRouteEntryTable 1.3.6.1.4.1.18.3.5.5.20 no-access
Wellfleet IPX Automatic Static Route Table
       wfIpxAutoStaticRouteEntry 1.3.6.1.4.1.18.3.5.5.20.1 no-access
The Auto Static Routes table contains information about all destinations reached via Auto statically configured routes.
           wfIpxAutoStaticRouteDelete 1.3.6.1.4.1.18.3.5.5.20.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this entry. Enumeration: 'deleted': 2, 'created': 1.
           wfIpxAutoStaticRouteDisable 1.3.6.1.4.1.18.3.5.5.20.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an entry. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxAutoStaticRouteSysInstance 1.3.6.1.4.1.18.3.5.5.20.1.3 integer read-only
The unique identifier of the instance of IPX to which this entry corresponds.
           wfIpxAutoStaticRouteCircIndex 1.3.6.1.4.1.18.3.5.5.20.1.4 integer read-only
The identifier of this circuit, unique within the instance of RIP. This value corresponds to the IPX circuit identifier found in wfIpxCircIndex.
           wfIpxAutoStaticRouteNetNum 1.3.6.1.4.1.18.3.5.5.20.1.5 octet string read-only
The network number of this static route.
           wfIpxAutoStaticRouteTicks 1.3.6.1.4.1.18.3.5.5.20.1.6 integer read-only
The cost in ticks of this static route entry.
           wfIpxAutoStaticRouteHopCount 1.3.6.1.4.1.18.3.5.5.20.1.7 integer read-only
The hop count to this static route.
           wfIpxAutoStaticRouteNextHopHostAddress 1.3.6.1.4.1.18.3.5.5.20.1.8 octet string read-only
The next hop host address of this entry
 wfIpxStaticRouteMaskEntryTable 1.3.6.1.4.1.18.3.5.5.21 no-access
Wellfleet IPX Static Route Mask Table
       wfIpxStaticRouteMaskEntry 1.3.6.1.4.1.18.3.5.5.21.1 no-access
The static route mask table only allows auto static route entries to be made when the net fits the netmask.
           wfIpxStaticRouteMaskDelete 1.3.6.1.4.1.18.3.5.5.21.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this entry. Enumeration: 'deleted': 2, 'created': 1.
           wfIpxStaticRouteMaskDisable 1.3.6.1.4.1.18.3.5.5.21.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an entry. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxStaticRouteMaskSysInstance 1.3.6.1.4.1.18.3.5.5.21.1.3 integer read-only
The unique identifier of the instance of IPX to which this entry corresponds.
           wfIpxStaticRouteMaskCircIndex 1.3.6.1.4.1.18.3.5.5.21.1.4 integer read-only
The identifier of this circuit, unique within the instance of RIP. This value corresponds to the IPX circuit identifier found in wfIpxCircIndex.
           wfIpxStaticRouteMaskNetwork 1.3.6.1.4.1.18.3.5.5.21.1.5 octet string read-only
The network
           wfIpxStaticRouteMaskNetworkMask 1.3.6.1.4.1.18.3.5.5.21.1.6 octet string read-only
The network mask.
 wfIpxServEntryTable 1.3.6.1.4.1.18.3.5.5.22 no-access
Wellfleet IPX service Table
       wfIpxServEntry 1.3.6.1.4.1.18.3.5.5.22.1 no-access
Table of services, indexed by type and name. NOTE: In the instance id wfIpxServName is prefixed by the service name's length.
           wfIpxServSysInstance 1.3.6.1.4.1.18.3.5.5.22.1.1 integer read-only
The unique identifier of the instance of IPX to which this entry corresponds.
           wfIpxServType 1.3.6.1.4.1.18.3.5.5.22.1.2 octet string read-only
The Service type.
           wfIpxServName 1.3.6.1.4.1.18.3.5.5.22.1.3 displaystring read-only
The Service name. NOTE: This is a variable length field, 2-47 chars.
           wfIpxServProtocol 1.3.6.1.4.1.18.3.5.5.22.1.4 integer read-only
The protocol from which knowledge of service was obtained. Enumeration: 'static': 5, 'other': 1, 'local': 2, 'sap': 6, 'nlsp': 4.
           wfIpxServNetNum 1.3.6.1.4.1.18.3.5.5.22.1.5 octet string read-only
The IPX network number portion of the IPX address of the service.
           wfIpxServNode 1.3.6.1.4.1.18.3.5.5.22.1.6 octet string read-only
The node portion of the IPX address of the service.
           wfIpxServSocket 1.3.6.1.4.1.18.3.5.5.22.1.7 octet string read-only
The socket portion of the IPX address of the service.
           wfIpxServHopCount 1.3.6.1.4.1.18.3.5.5.22.1.8 integer read-only
The number of hops to the service.
           wfIpxServNextHopCircIndex 1.3.6.1.4.1.18.3.5.5.22.1.9 integer read-only
The unique identifier of the IPX circuit used to reach the next hop.
           wfIpxServNextHopHostAddress 1.3.6.1.4.1.18.3.5.5.22.1.10 octet string read-only
The Host address of the Next Hop.
           wfIpxServNextHopNetNum 1.3.6.1.4.1.18.3.5.5.22.1.11 octet string read-only
The IPX network number of the next hop.
           wfIpxServAge 1.3.6.1.4.1.18.3.5.5.22.1.12 integer read-only
The current age of this entry, in seconds. Local, Static, and NLSP services are not aged.
 wfIpxUserStaticServEntryTable 1.3.6.1.4.1.18.3.5.5.23 no-access
Wellfleet IPX User Static Service Table
       wfIpxUserStaticServEntry 1.3.6.1.4.1.18.3.5.5.23.1 no-access
The Static Servs table contains information about all destinations reached via user statically configured Servs. NOTE: In the instance id wfIpxUserStaticServName is prefixed by the service name's length.
           wfIpxUserStaticServDelete 1.3.6.1.4.1.18.3.5.5.23.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this entry. Enumeration: 'deleted': 2, 'created': 1.
           wfIpxUserStaticServDisable 1.3.6.1.4.1.18.3.5.5.23.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an entry. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxUserStaticServSysInstance 1.3.6.1.4.1.18.3.5.5.23.1.3 integer read-only
The unique identifier of the instance of IPX to which this entry corresponds.
           wfIpxUserStaticServCircIndex 1.3.6.1.4.1.18.3.5.5.23.1.4 integer read-only
The identifier of this circuit, unique within the instance of RIP. This value corresponds to the IPX circuit identifier found in wfIpxCircIndex.
           wfIpxUserStaticServName 1.3.6.1.4.1.18.3.5.5.23.1.5 displaystring read-only
The service name. NOTE: This is a variable length field, 2-47 chars.
           wfIpxUserStaticServType 1.3.6.1.4.1.18.3.5.5.23.1.6 octet string read-only
The service type.
           wfIpxUserStaticServNetNum 1.3.6.1.4.1.18.3.5.5.23.1.7 octet string read-write
The network number of this static service.
           wfIpxUserStaticServHostAddress 1.3.6.1.4.1.18.3.5.5.23.1.8 octet string read-write
The host address of this static service.
           wfIpxUserStaticServSocket 1.3.6.1.4.1.18.3.5.5.23.1.9 octet string read-write
The socket of this static service.
           wfIpxUserStaticServHopCount 1.3.6.1.4.1.18.3.5.5.23.1.10 integer read-write
The hop count of this static service.
 wfIpxAutoStaticServEntryTable 1.3.6.1.4.1.18.3.5.5.24 no-access
Wellfleet IPX Auto Static Service Table
       wfIpxAutoStaticServEntry 1.3.6.1.4.1.18.3.5.5.24.1 no-access
The Static Servs table contains information about all destinations reached via Auto statically configured Servs. NOTE: In the instance id wfIpxAutoStaticServName is prefixed by the service name's length.
           wfIpxAutoStaticServDelete 1.3.6.1.4.1.18.3.5.5.24.1.1 integer read-write
Create/Delete parameter. Default is created. Autos perform an SNMP SET operation on this object in order to create/delete this entry. Enumeration: 'deleted': 2, 'created': 1.
           wfIpxAutoStaticServDisable 1.3.6.1.4.1.18.3.5.5.24.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Autos perform an SNMP SET operation on this object in order to enable/disable an entry. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxAutoStaticServSysInstance 1.3.6.1.4.1.18.3.5.5.24.1.3 integer read-only
The unique identifier of the instance of IPX to which this entry corresponds.
           wfIpxAutoStaticServCircIndex 1.3.6.1.4.1.18.3.5.5.24.1.4 integer read-only
The identifier of this circuit, unique within the instance of RIP. This value corresponds to the IPX circuit identifier found in wfIpxCircIndex.
           wfIpxAutoStaticServName 1.3.6.1.4.1.18.3.5.5.24.1.5 displaystring read-only
The service name. NOTE: This is a variable length field, 2-47 chars.
           wfIpxAutoStaticServType 1.3.6.1.4.1.18.3.5.5.24.1.6 octet string read-only
The service type.
           wfIpxAutoStaticServNetNum 1.3.6.1.4.1.18.3.5.5.24.1.7 octet string read-only
The network number of this static service.
           wfIpxAutoStaticServHostAddress 1.3.6.1.4.1.18.3.5.5.24.1.8 octet string read-only
The host address of this static service.
           wfIpxAutoStaticServSocket 1.3.6.1.4.1.18.3.5.5.24.1.9 octet string read-only
The socket of this static service.
           wfIpxAutoStaticServHopCount 1.3.6.1.4.1.18.3.5.5.24.1.10 integer read-only
The hop count of this static service.
 wfIpxStaticServMaskEntryTable 1.3.6.1.4.1.18.3.5.5.25 no-access
Wellfleet IPX Static Service Mask Table
       wfIpxStaticServMaskEntry 1.3.6.1.4.1.18.3.5.5.25.1 no-access
The Static Servs table contains information about all destinations reached via Auto statically configured Servs.
           wfIpxStaticServMaskDelete 1.3.6.1.4.1.18.3.5.5.25.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this entry. Enumeration: 'deleted': 2, 'created': 1.
           wfIpxStaticServMaskDisable 1.3.6.1.4.1.18.3.5.5.25.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an entry. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxStaticServMaskSysInstance 1.3.6.1.4.1.18.3.5.5.25.1.3 integer read-only
The unique identifier of the instance of IPX to which this entry corresponds.
           wfIpxStaticServMaskCircIndex 1.3.6.1.4.1.18.3.5.5.25.1.4 integer read-only
The identifier of this circuit, unique within the instance of RIP. This value corresponds to the IPX circuit identifier found in wfIpxCircIndex.
           wfIpxStaticServMaskNetwork 1.3.6.1.4.1.18.3.5.5.25.1.5 octet string read-only
The network
           wfIpxStaticServMaskNetworkMask 1.3.6.1.4.1.18.3.5.5.25.1.6 octet string read-only
The network mask.
 wfIpxStaticHostEntryTable 1.3.6.1.4.1.18.3.5.5.26 no-access
Wellfleet IPX Static Host Table
       wfIpxStaticHostEntry 1.3.6.1.4.1.18.3.5.5.26.1 no-access
The static host entries define mappings from circindex and host address to wan physical layer address.
           wfIpxStaticHostDelete 1.3.6.1.4.1.18.3.5.5.26.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this entry. Enumeration: 'deleted': 2, 'created': 1.
           wfIpxStaticHostDisable 1.3.6.1.4.1.18.3.5.5.26.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an entry. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxStaticHostSysInstance 1.3.6.1.4.1.18.3.5.5.26.1.3 integer read-only
The unique identifier of the instance of IPX to which this entry corresponds.
           wfIpxStaticHostCircIndex 1.3.6.1.4.1.18.3.5.5.26.1.4 integer read-only
The identifier of this circuit, unique within the instance of RIP. This value corresponds to the IPX circuit identifier found in wfIpxCircIndex.
           wfIpxStaticHostAddress 1.3.6.1.4.1.18.3.5.5.26.1.5 octet string read-only
The host address of this static host.
           wfIpxStaticHostWanAddress 1.3.6.1.4.1.18.3.5.5.26.1.6 octet string read-write
The wan address of this host.
           wfIpxStaticHostSubaddress 1.3.6.1.4.1.18.3.5.5.26.1.7 displaystring read-write
The subaddress used to establish an SVC to the adjacent host.
           wfIpxStaticHostTypeOfNumber 1.3.6.1.4.1.18.3.5.5.26.1.8 integer read-write
The type of number used to establish an SVC to the adjacent host. Enumeration: 'unknown': 1, 'international': 2.
           wfIpxStaticHostType 1.3.6.1.4.1.18.3.5.5.26.1.9 integer read-write
The type of static host. Enumeration: 'atmsvc': 6, 'frdlci': 4, 'default': 2, 'gre': 5, 'fre164': 1, 'frx121': 3.
           wfIpxStaticHostGreConnName 1.3.6.1.4.1.18.3.5.5.26.1.10 displaystring read-write
The name of the remote GRE connection to which a static host is configured.
 wfIpxUserStaticNETBIOSTable 1.3.6.1.4.1.18.3.5.5.27 no-access
Wellfleet IPX User Static NetBIOS Route Table
       wfIpxUserStaticNETBIOSEntry 1.3.6.1.4.1.18.3.5.5.27.1 no-access
Contains entries that map NetBIOS names to destination addresses.
           wfIpxUserStaticNETBIOSDelete 1.3.6.1.4.1.18.3.5.5.27.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this entry. Enumeration: 'deleted': 2, 'created': 1.
           wfIpxUserStaticNETBIOSDisable 1.3.6.1.4.1.18.3.5.5.27.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an entry. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxUserStaticNETBIOSSysInstance 1.3.6.1.4.1.18.3.5.5.27.1.3 integer read-only
The unique identifier of the instance of IPX to which this entry corresponds.
           wfIpxUserStaticNETBIOSName 1.3.6.1.4.1.18.3.5.5.27.1.4 displaystring read-only
The destination name for this NetBIOS static route.
           wfIpxUserStaticNETBIOSDestNetwork 1.3.6.1.4.1.18.3.5.5.27.1.5 octet string read-write
The destination network for this NetBIOS static route.
 wfIpxAutoStaticNETBIOSTable 1.3.6.1.4.1.18.3.5.5.28 no-access
Wellfleet IPX Auto Static NetBIOS Route Table
       wfIpxAutoStaticNETBIOSEntry 1.3.6.1.4.1.18.3.5.5.28.1 no-access
Contains entries that map NetBIOS names to destination addresses.
           wfIpxAutoStaticNETBIOSDelete 1.3.6.1.4.1.18.3.5.5.28.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this entry. Enumeration: 'deleted': 2, 'created': 1.
           wfIpxAutoStaticNETBIOSDisable 1.3.6.1.4.1.18.3.5.5.28.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an entry. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxAutoStaticNETBIOSSysInstance 1.3.6.1.4.1.18.3.5.5.28.1.3 integer read-only
The unique identifier of the instance of IPX to which this entry corresponds.
           wfIpxAutoStaticNETBIOSDestNetwork 1.3.6.1.4.1.18.3.5.5.28.1.4 octet string read-only
The destination network for this NetBIOS static route.
           wfIpxAutoStaticNETBIOSName 1.3.6.1.4.1.18.3.5.5.28.1.5 displaystring read-only
The destination name for this NetBIOS static route.
 wfIpxRouteFilterTable 1.3.6.1.4.1.18.3.5.5.29 no-access
Wellfleet IPX Route Filter Table
       wfIpxRouteFilterEntry 1.3.6.1.4.1.18.3.5.5.29.1 no-access
Each entry corresponds to one filter.
           wfIpxRouteFilterDelete 1.3.6.1.4.1.18.3.5.5.29.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this entry. Enumeration: 'deleted': 2, 'created': 1.
           wfIpxRouteFilterDisable 1.3.6.1.4.1.18.3.5.5.29.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an entry. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxRouteFilterSysInstance 1.3.6.1.4.1.18.3.5.5.29.1.3 integer read-only
The unique identifier of the instance of IPX to which this entry corresponds.
           wfIpxRouteFilterCircIndex 1.3.6.1.4.1.18.3.5.5.29.1.4 integer read-only
The identifier of this circuit, unique within the instance of IPX. This value corresponds to the IPX circuit identifier found in wfIpxCircIndex.
           wfIpxRouteFilterRuleNumber 1.3.6.1.4.1.18.3.5.5.29.1.5 integer read-only
The identifier of the filter, unique within the IPX circuit.
           wfIpxRouteFilterNetwork 1.3.6.1.4.1.18.3.5.5.29.1.6 octet string read-write
The network
           wfIpxRouteFilterNetworkMask 1.3.6.1.4.1.18.3.5.5.29.1.7 octet string read-write
The network mask
           wfIpxRouteFilterMode 1.3.6.1.4.1.18.3.5.5.29.1.8 integer read-write
The mode for filtering, Inbound, Outbound, or Both. Enumeration: 'inbound': 2, 'both': 3, 'outbound': 1.
           wfIpxRouteFilterAction 1.3.6.1.4.1.18.3.5.5.29.1.9 integer read-write
The action for the filter. Enumeration: 'suppress': 2, 'advertise': 1.
           wfIpxRouteFilterProtocol 1.3.6.1.4.1.18.3.5.5.29.1.10 integer read-write
Apply this filter only to routes learned on protocol X when sending RIP updates. Does not apply to Inbound routes. A value of 1 (default) represents any protocol. Enumeration: 'static': 5, 'local': 2, 'any': 1, 'rip': 3, 'nlsp': 4.
           wfIpxRouteFilterCost 1.3.6.1.4.1.18.3.5.5.29.1.11 integer read-write
Cost for routes matching this filter. A Zero cost indicates that the route's actual cost should be used. Value only used when action is Advertise.
           wfIpxRouteFilterCounter 1.3.6.1.4.1.18.3.5.5.29.1.12 counter read-only
The number of packets matching this filter.
           wfIpxRouteFilterPriority 1.3.6.1.4.1.18.3.5.5.29.1.13 integer read-write
Priority of this filter in relation to other filters of the same type.
 wfIpxServNetFilterTable 1.3.6.1.4.1.18.3.5.5.30 no-access
Wellfleet IPX Service Net Filter Table
       wfIpxServNetFilterEntry 1.3.6.1.4.1.18.3.5.5.30.1 no-access
Each entry corresponds to one service filter.
           wfIpxServNetFilterDelete 1.3.6.1.4.1.18.3.5.5.30.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this entry. Enumeration: 'deleted': 2, 'created': 1.
           wfIpxServNetFilterDisable 1.3.6.1.4.1.18.3.5.5.30.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an entry. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxServNetFilterSysInstance 1.3.6.1.4.1.18.3.5.5.30.1.3 integer read-only
The unique identifier of the instance of IPX to which this entry corresponds.
           wfIpxServNetFilterCircIndex 1.3.6.1.4.1.18.3.5.5.30.1.4 integer read-only
The identifier of this circuit, unique within the instance of RIP. This value corresponds to the IPX circuit identifier found in wfIpxCircIndex.
           wfIpxServNetFilterRuleNumber 1.3.6.1.4.1.18.3.5.5.30.1.5 integer read-only
The identifier of the filter, unique within the IPX circuit.
           wfIpxServNetFilterNetwork 1.3.6.1.4.1.18.3.5.5.30.1.6 octet string read-write
The network.
           wfIpxServNetFilterNetworkMask 1.3.6.1.4.1.18.3.5.5.30.1.7 octet string read-write
The network mask.
           wfIpxServNetFilterType 1.3.6.1.4.1.18.3.5.5.30.1.8 octet string read-write
The service type.
           wfIpxServNetFilterMode 1.3.6.1.4.1.18.3.5.5.30.1.9 integer read-write
The mode for filtering, Inbound, Outbound, or Both. Enumeration: 'inbound': 2, 'both': 3, 'outbound': 1.
           wfIpxServNetFilterAction 1.3.6.1.4.1.18.3.5.5.30.1.10 integer read-write
The action for the filter. Enumeration: 'suppress': 2, 'advertise': 1.
           wfIpxServNetFilterProtocol 1.3.6.1.4.1.18.3.5.5.30.1.11 integer read-write
Apply this filter only to services learned on protocol X when sending SAP updates. Does not apply to Inbound services. A value of 1 (default) represents any protocol. Enumeration: 'static': 5, 'sap': 6, 'local': 2, 'any': 1, 'nlsp': 4.
           wfIpxServNetFilterCost 1.3.6.1.4.1.18.3.5.5.30.1.12 integer read-write
Cost for services matching this filter. A Zero cost indicates that the service's actual cost should be used. Value only used when action is Advertise.
           wfIpxServNetFilterCounter 1.3.6.1.4.1.18.3.5.5.30.1.13 counter read-only
The number of packets matching this filter.
           wfIpxServNetFilterPriority 1.3.6.1.4.1.18.3.5.5.30.1.14 integer read-write
Priority of this filter in relation to other filters of the same type.
 wfIpxServNameFilterTable 1.3.6.1.4.1.18.3.5.5.31 no-access
Wellfleet IPX Service Name Filter Table
       wfIpxServNameFilterEntry 1.3.6.1.4.1.18.3.5.5.31.1 no-access
Each entry corresponds to one service filter. NOTE: In the instance id wfIpxServNameFilterName is prefixed by the service name's length.
           wfIpxServNameFilterDelete 1.3.6.1.4.1.18.3.5.5.31.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this entry. Enumeration: 'deleted': 2, 'created': 1.
           wfIpxServNameFilterDisable 1.3.6.1.4.1.18.3.5.5.31.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an entry. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxServNameFilterSysInstance 1.3.6.1.4.1.18.3.5.5.31.1.3 integer read-only
The unique identifier of the instance of IPX to which this entry corresponds.
           wfIpxServNameFilterCircIndex 1.3.6.1.4.1.18.3.5.5.31.1.4 integer read-only
The identifier of this circuit, unique within the instance of RIP. This value corresponds to the IPX circuit identifier found in wfIpxCircIndex.
           wfIpxServNameFilterRuleNumber 1.3.6.1.4.1.18.3.5.5.31.1.5 integer read-only
The identifier of the filter, unique within the IPX circuit.
           wfIpxServNameFilterName 1.3.6.1.4.1.18.3.5.5.31.1.6 displaystring read-write
The name of the service to be filtered. NOTE: This is a variable length field, 2-47 chars. This field may be a regex matching pattern.
           wfIpxServNameFilterType 1.3.6.1.4.1.18.3.5.5.31.1.7 octet string read-write
The type of the service to be filtered.
           wfIpxServNameFilterMode 1.3.6.1.4.1.18.3.5.5.31.1.8 integer read-write
The mode for filtering, Inbound, Outbound, or Both. Enumeration: 'inbound': 2, 'both': 3, 'outbound': 1.
           wfIpxServNameFilterAction 1.3.6.1.4.1.18.3.5.5.31.1.9 integer read-write
The action for the filter. Enumeration: 'suppress': 2, 'advertise': 1.
           wfIpxServNameFilterProtocol 1.3.6.1.4.1.18.3.5.5.31.1.10 integer read-write
Apply this filter only to services learned on protocol X when sending SAP updates. Does not apply to Inbound services. A value of 1 (default) represents any protocol. Enumeration: 'static': 5, 'sap': 6, 'local': 2, 'any': 1, 'nlsp': 4.
           wfIpxServNameFilterCost 1.3.6.1.4.1.18.3.5.5.31.1.11 integer read-write
Cost for services matching this filter. A Zero cost indicates that the service's actual cost should be used. Value only used when action is Advertise.
           wfIpxServNameFilterCounter 1.3.6.1.4.1.18.3.5.5.31.1.12 counter read-only
The number of packets matching this filter.
           wfIpxServNameFilterPriority 1.3.6.1.4.1.18.3.5.5.31.1.13 integer read-write
Priority of this filter in relation to other filters of the same type.
 wfIpxRipCircTable 1.3.6.1.4.1.18.3.5.5.32 no-access
IPX RIP Circuit MIB
       wfIpxRipCircEntry 1.3.6.1.4.1.18.3.5.5.32.1 no-access
An entry in the IPX RIP circuit table
           wfIpxRipCircDelete 1.3.6.1.4.1.18.3.5.5.32.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this entry. Enumeration: 'deleted': 2, 'created': 1.
           wfIpxRipCircDisable 1.3.6.1.4.1.18.3.5.5.32.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an entry. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxRipCircState 1.3.6.1.4.1.18.3.5.5.32.1.3 integer read-only
The current state of this entry Enumeration: 'down': 2, 'init': 3, 'up': 1, 'notpresent': 4.
           wfIpxRipCircSysInstance 1.3.6.1.4.1.18.3.5.5.32.1.4 integer read-only
The unique identifier of the instance of IPX to which this entry corresponds.
           wfIpxRipCircIndex 1.3.6.1.4.1.18.3.5.5.32.1.5 integer read-only
The identifier of this circuit, unique within the instance of RIP. This value corresponds to the IPX circuit identifier found in wfIpxCircIndex.
           wfIpxRipCircMode 1.3.6.1.4.1.18.3.5.5.32.1.6 integer read-write
Whether this RIP entry is in mode. Enumeration: 'supply': 3, 'auto': 4, 'listen': 2, 'standard': 1.
           wfIpxRipCircPace 1.3.6.1.4.1.18.3.5.5.32.1.7 integer read-write
The maximum pace, in packets/second, at which RIP packets may be sent on this circuit.
           wfIpxRipCircUpdate 1.3.6.1.4.1.18.3.5.5.32.1.8 integer read-write
The RIP periodic update interval, in seconds
           wfIpxRipCircAgeMultiplier 1.3.6.1.4.1.18.3.5.5.32.1.9 integer read-write
The holding multiplier for information received in RIP periodic updates.
           wfIpxRipCircPacketSize 1.3.6.1.4.1.18.3.5.5.32.1.10 integer read-write
The Maximum RIP packet size used on this circuit
           wfIpxRipCircOutPackets 1.3.6.1.4.1.18.3.5.5.32.1.11 counter read-only
The number of locally created RIP packets sent out this IPX RIP circuit.
           wfIpxRipCircInPackets 1.3.6.1.4.1.18.3.5.5.32.1.12 counter read-only
The number of RIP packets received on this IPX circuit, destined locally.
           wfIpxRipCircBadPackets 1.3.6.1.4.1.18.3.5.5.32.1.13 counter read-only
The number of bad RIP packets received on this IPX circuit.
           wfIpxRipCircUseMulticast 1.3.6.1.4.1.18.3.5.5.32.1.14 integer read-write
Use multicast address to send RIP packets. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxRipCircSplitHorizon 1.3.6.1.4.1.18.3.5.5.32.1.15 integer read-write
Enable/Disable split horizon on this RIP circuit. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxRipCircGenAutoStaticRoutes 1.3.6.1.4.1.18.3.5.5.32.1.16 integer read-write
Tell IPX to generate entries in the wfIpxAutoStaticRouteTable. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxRipCircImmedUpdate 1.3.6.1.4.1.18.3.5.5.32.1.17 integer read-write
Enable/Disable parameter. Users perform an SNMP SET operation on this object in order to enable/disable RIP immediate update on this particular circuit. The 'useglobal(3)' means the value of the global parameter wfIpxAdvSysGlobalTrigUpdate will be used on the circuit for this attribute. Default is useglobal. Enumeration: 'disabled': 2, 'useglobal': 3, 'enabled': 1.
           wfIpxRipCircDefaultRouteSupply 1.3.6.1.4.1.18.3.5.5.32.1.18 integer read-write
Advertise the default route, 0xFFFFFFFE, in RIP packets. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxRipCircDefaultRouteListen 1.3.6.1.4.1.18.3.5.5.32.1.19 integer read-write
Accept the default route, 0xFFFFFFFE, in RIP packets. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxRipCircLostRouteDisable 1.3.6.1.4.1.18.3.5.5.32.1.20 integer read-write
Disable lost route on RIP circuit Enumeration: 'enable': 1, 'disable': 2.
 wfIpxSapCircTable 1.3.6.1.4.1.18.3.5.5.33 no-access
IPX SAP Circuit MIB
       wfIpxSapCircEntry 1.3.6.1.4.1.18.3.5.5.33.1 no-access
An entry in the IPX SAP circuit table
           wfIpxSapCircDelete 1.3.6.1.4.1.18.3.5.5.33.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this entry. Enumeration: 'deleted': 2, 'created': 1.
           wfIpxSapCircDisable 1.3.6.1.4.1.18.3.5.5.33.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an entry. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxSapCircState 1.3.6.1.4.1.18.3.5.5.33.1.3 integer read-only
The current state of this entry Enumeration: 'down': 2, 'init': 3, 'up': 1, 'notpresent': 4.
           wfIpxSapCircSysInstance 1.3.6.1.4.1.18.3.5.5.33.1.4 integer read-only
The unique identifier of the instance of IPX to which this entry corresponds.
           wfIpxSapCircIndex 1.3.6.1.4.1.18.3.5.5.33.1.5 integer read-only
The identifier of this circuit, unique within the instance of SAP. This value corresponds to the IPX circuit identifier found in wfIpxCircIndex.
           wfIpxSapCircMode 1.3.6.1.4.1.18.3.5.5.33.1.6 integer read-write
Whether this SAP entry is in mode. Enumeration: 'supply': 3, 'auto': 4, 'listen': 2, 'standard': 1.
           wfIpxSapCircPace 1.3.6.1.4.1.18.3.5.5.33.1.7 integer read-write
The maximum pace, in packets/second, at which SAP packets may be sent on this circuit.
           wfIpxSapCircUpdate 1.3.6.1.4.1.18.3.5.5.33.1.8 integer read-write
The SAP periodic update interval, in seconds
           wfIpxSapCircAgeMultiplier 1.3.6.1.4.1.18.3.5.5.33.1.9 integer read-write
The holding multiplier for information received in SAP periodic updates.
           wfIpxSapCircPacketSize 1.3.6.1.4.1.18.3.5.5.33.1.10 integer read-write
The Maximum SAP packet size used on this circuit
           wfIpxSapCircGetNearestServerReply 1.3.6.1.4.1.18.3.5.5.33.1.11 integer read-write
Enable/Disable responding to GNS requests on this circuit. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxSapCircNSQAlphabetical 1.3.6.1.4.1.18.3.5.5.33.1.12 integer read-write
Respond to NSQ in Alphabetical order, ie. first-best server. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxSapCircOutPackets 1.3.6.1.4.1.18.3.5.5.33.1.13 counter read-only
The number of locally created SAP packets sent out this IPX SAP circuit.
           wfIpxSapCircInPackets 1.3.6.1.4.1.18.3.5.5.33.1.14 counter read-only
The number of SAP packets received on this IPX circuit, destined locally.
           wfIpxSapCircBadPackets 1.3.6.1.4.1.18.3.5.5.33.1.15 counter read-only
The number of bad SAP packets received on this IPX circuit.
           wfIpxSapCircUseMulticast 1.3.6.1.4.1.18.3.5.5.33.1.16 integer read-write
Use multicast address to send SAP packets. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxSapCircSplitHorizon 1.3.6.1.4.1.18.3.5.5.33.1.17 integer read-write
Enable/Disable split horizon on this SAP circuit. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxSapCircGenAutoStaticServices 1.3.6.1.4.1.18.3.5.5.33.1.18 integer read-write
Tell IPX to generate entries in the wfIpxAutoStaticServTable. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxSapCircImmedUpdate 1.3.6.1.4.1.18.3.5.5.33.1.19 integer read-write
Enable/Disable parameter. Users perform an SNMP SET operation on this object in order to enable/disable RIP immediate update on this particular circuit. The 'useglobal(3)' means the value of the global parameter wfIpxAdvSysGlobalTrigUpdate will be used on the circuit for this attribute. Default is useglobal. Enumeration: 'disabled': 2, 'useglobal': 3, 'enabled': 1.
           wfIpxSapCircSaveFullName 1.3.6.1.4.1.18.3.5.5.33.1.20 integer read-write
This allows the Router to ignore all characters following the NULL character in the service name field of SAP packets. It is intended to be a memory and cpu saving option. Enumeration: 'disabled': 2, 'enabled': 1.
 wfIpxHostEntryTable 1.3.6.1.4.1.18.3.5.5.34 no-access
IPX Host table, contains information about all known hosts.
       wfIpxHostEntry 1.3.6.1.4.1.18.3.5.5.34.1 no-access
Host table contains information about all known hosts.
           wfIpxHostSysInstance 1.3.6.1.4.1.18.3.5.5.34.1.1 integer read-only
The unique identifier of the instance of IPX to which this entry corresponds.
           wfIpxHostNextHopCircIndex 1.3.6.1.4.1.18.3.5.5.34.1.2 integer read-only
The unique identifier of the IPX circuit used to reach the host.
           wfIpxHostHostAddress 1.3.6.1.4.1.18.3.5.5.34.1.3 octet string read-only
The Host address of the Host.
           wfIpxHostNetNum 1.3.6.1.4.1.18.3.5.5.34.1.4 octet string read-only
The network number of this host.
           wfIpxHostWanAddress 1.3.6.1.4.1.18.3.5.5.34.1.5 octet string read-only
The Wan Physical address of this Host. NOTE: Only valid on WAN media where there is no one-to-one mapping of host address to physical address.
           wfIpxHostProtocol 1.3.6.1.4.1.18.3.5.5.34.1.6 integer read-only
The routing protocol from which knowledge of this host was obtained. Enumeration: 'dynamic': 3, 'static': 4, 'other': 1, 'local': 2.
           wfIpxHostAge 1.3.6.1.4.1.18.3.5.5.34.1.7 integer read-only
The current age of this entry, in seconds. Local and Static hosts are not aged.
 wfIpxForwardEntryTable 1.3.6.1.4.1.18.3.5.5.35 no-access
IPX Forward table, contains information about all known forward entries.
       wfIpxForwardEntry 1.3.6.1.4.1.18.3.5.5.35.1 no-access
Forward table contains information about all known forward entries.
           wfIpxForwardSysInstance 1.3.6.1.4.1.18.3.5.5.35.1.1 integer read-only
The unique identifier of the instance of IPX to which this entry corresponds.
           wfIpxForwardCircIndex 1.3.6.1.4.1.18.3.5.5.35.1.2 integer read-only
The unique identifier of the IPX circuit forward table in which this forward entry resides.
           wfIpxForwardNetNum 1.3.6.1.4.1.18.3.5.5.35.1.3 octet string read-only
The network number of this forward entry.
           wfIpxForwardType 1.3.6.1.4.1.18.3.5.5.35.1.4 integer read-only
The type of this forward entry. Enumeration: 'remote': 3, 'other': 1, 'local': 2.
           wfIpxForwardProtocol 1.3.6.1.4.1.18.3.5.5.35.1.5 integer read-only
The routing protocol from which knowledge of this forward was obtained. Enumeration: 'static': 5, 'other': 1, 'local': 2, 'rip': 3, 'nlsp': 4.
           wfIpxForwardCount 1.3.6.1.4.1.18.3.5.5.35.1.6 counter read-only
The number of equal cost paths for this forward entry.
 wfIpxTrafficFilter2Table 1.3.6.1.4.1.18.3.5.5.36 no-access
IPX Traffic Filters
       wfIpxTrafficFilter2Entry 1.3.6.1.4.1.18.3.5.5.36.1 no-access
A traffic filter definition
           wfIpxTrafficFilter2Create 1.3.6.1.4.1.18.3.5.5.36.1.1 integer read-write
Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted. Enumeration: 'deleted': 2, 'created': 1.
           wfIpxTrafficFilter2Enable 1.3.6.1.4.1.18.3.5.5.36.1.2 integer read-write
Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule. Enumeration: 'disabled': 2, 'enabled': 1.
           wfIpxTrafficFilter2Status 1.3.6.1.4.1.18.3.5.5.36.1.3 integer read-only
Defines the current status of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error in the rule. Enumeration: 'active': 1, 'inactive': 3, 'error': 2.
           wfIpxTrafficFilter2Counter 1.3.6.1.4.1.18.3.5.5.36.1.4 counter read-only
The number of received packets that have matched this rule.
           wfIpxTrafficFilter2Definition 1.3.6.1.4.1.18.3.5.5.36.1.5 opaque read-write
The filter rule definition.
           wfIpxTrafficFilter2Reserved 1.3.6.1.4.1.18.3.5.5.36.1.6 integer read-only
Reserved field.
           wfIpxTrafficFilter2SysInstance 1.3.6.1.4.1.18.3.5.5.36.1.7 integer read-only
The unique identifier for the instance of IPX.
           wfIpxTrafficFilter2CircIndex 1.3.6.1.4.1.18.3.5.5.36.1.8 integer read-only
The identifier of this IPX circuit. This value corresponds to the IPX circuit identifier found in wfIpxCircIndex.
           wfIpxTrafficFilter2RuleNumber 1.3.6.1.4.1.18.3.5.5.36.1.9 integer read-only
ID for the rule.
           wfIpxTrafficFilter2Fragment 1.3.6.1.4.1.18.3.5.5.36.1.10 integer read-only
Fragment number - for large rules.
           wfIpxTrafficFilter2Name 1.3.6.1.4.1.18.3.5.5.36.1.11 displaystring read-write
Name of the rule number.