Wellfleet-DSX3-MIB: View SNMP OID List / Download MIB

VENDOR: WELLFLEET

Home	MIB: Wellfleet-DSX3-MIB
Download as:		SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Wellfleet-COMMON-MIB		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
wfDsx3ConfigTable	1.3.6.1.4.1.18.3.4.26.1		no-access	The DS3/E3 Configuration table
wfDsx3ConfigEntry	1.3.6.1.4.1.18.3.4.26.1.1		no-access	per circuit DS3/E3 configuration objects; wfDsx3LineIndex corresponds to Wellfleet circuit number
wfDsx3LineIndex	1.3.6.1.4.1.18.3.4.26.1.1.1	integer	read-only	this corresponds to the Wellfleet circuit number
wfDsx3IfIndex	1.3.6.1.4.1.18.3.4.26.1.1.2	integer	read-only	this is value of ifIndex from the Interfaces table of MIB II (RFC 1213).
wfDsx3TimeElapsed	1.3.6.1.4.1.18.3.4.26.1.1.3	integer	read-only	0..899 seconds elapsed within the current 15-minute interval
wfDsx3ValidIntervals	1.3.6.1.4.1.18.3.4.26.1.1.4	integer	read-only	0..96 previous intervals that valid data were collected. This is 96 unless the device was brought on line within the last 24 hours.
wfDsx3LineType	1.3.6.1.4.1.18.3.4.26.1.1.5	integer	read-only	the variety of DS3/E3 application implementing this circuit Enumeration: 'ds3m23': 2, 'ds3cbitparity': 4, 'e3other': 6, 'ds3clearchannel': 5, 'e3framed': 7, 'ds3other': 1, 'ds3syntran': 3, 'e3plcp': 8.
wfDsx3LineCoding	1.3.6.1.4.1.18.3.4.26.1.1.6	integer	read-only	the variety of Zero Code Suppression used on the link Enumeration: 'b3zs': 2, 'other': 1, 'hdb3': 3.
wfDsx3SendCode	1.3.6.1.4.1.18.3.4.26.1.1.7	integer	read-only	the type of code being sent across the DS3/E3 circuit by the device Enumeration: 'resetcode': 4, 'ds1loopcode': 5, 'nocode': 1, 'linecode': 2, 'testpattern': 6, 'payloadcode': 3.
wfDsx3CircuitIdentifier	1.3.6.1.4.1.18.3.4.26.1.1.8	displaystring	read-only	the transmission vendor's circuit identifier
wfDsx3LoopbackConfig	1.3.6.1.4.1.18.3.4.26.1.1.9	integer	read-only	the loopback configuration of the DS3/E3 interface Enumeration: 'lineloop': 3, 'noloop': 1, 'otherloop': 4, 'payloadloop': 2.
wfDsx3LineStatus	1.3.6.1.4.1.18.3.4.26.1.1.10	integer	read-only	the status of the DS3/E3 line Enumeration: 'lof': 32, 'otherfailure': 512, 'loopback': 128, 'rctestcode': 256, 'noalarm': 1, 'rcais': 8, 'los': 64, 'txais': 16, 'txrai': 4, 'rcrai': 2.
wfDsx3TransmitClockSource	1.3.6.1.4.1.18.3.4.26.1.1.11	integer	read-only	the source of Transmit Clock for the DS3/E3 interface Enumeration: 'throughtiming': 3, 'looptiming': 1, 'localtiming': 2.
wfDsx3CurrentTable	1.3.6.1.4.1.18.3.4.26.2		no-access	The DS3/E3 Current table
wfDsx3CurrentEntry	1.3.6.1.4.1.18.3.4.26.2.1		no-access	per circuit DS3/E3 current objects - wfDsx3CurrentIndex corresponds to Wellfleet circuit number
wfDsx3CurrentIndex	1.3.6.1.4.1.18.3.4.26.2.1.1	integer	read-only	this corresponds to the Wellfleet circuit number
wfDsx3CurrentPESs	1.3.6.1.4.1.18.3.4.26.2.1.2	gauge	read-only	the number of P-bit Errored Seconds in the current interval
wfDsx3CurrentPSESs	1.3.6.1.4.1.18.3.4.26.2.1.3	gauge	read-only	the number of P-bit Severely Errored Seconds in the current interval
wfDsx3CurrentSEFSs	1.3.6.1.4.1.18.3.4.26.2.1.4	gauge	read-only	the number of Severely Errored Framing Seconds in the current interval
wfDsx3CurrentUASs	1.3.6.1.4.1.18.3.4.26.2.1.5	gauge	read-only	the number of Unavailable Seconds in the current interval
wfDsx3CurrentLCVs	1.3.6.1.4.1.18.3.4.26.2.1.6	gauge	read-only	the number of Line Coding Violations in the current interval
wfDsx3CurrentPCVs	1.3.6.1.4.1.18.3.4.26.2.1.7	gauge	read-only	the number of P-bit Coding Violations in the current interval
wfDsx3CurrentLESs	1.3.6.1.4.1.18.3.4.26.2.1.8	gauge	read-only	the number of Line Errored Seconds in the current interval
wfDsx3CurrentCCVs	1.3.6.1.4.1.18.3.4.26.2.1.9	gauge	read-only	the number of C-bit Coding Violations in the current interval
wfDsx3CurrentCESs	1.3.6.1.4.1.18.3.4.26.2.1.10	gauge	read-only	the number of C-bit Errored Seconds in the current interval
wfDsx3CurrentCSESs	1.3.6.1.4.1.18.3.4.26.2.1.11	gauge	read-only	the number of C-bit Severely Errored Seconds in the current interval
wfDsx3CurrentSASs	1.3.6.1.4.1.18.3.4.26.2.1.12	gauge	read-only	the number of Seconds containing one or more SEFs or AIS defects in the current interval
wfDsx3CurrentAISSs	1.3.6.1.4.1.18.3.4.26.2.1.13	gauge	read-only	the number of Seconds containing one or more AIS defect in the current interval
wfDsx3CurrentFCs	1.3.6.1.4.1.18.3.4.26.2.1.14	gauge	read-only	the number of Path Failure Count error events detected in the current interval
wfDsx3CurrentTimeElapsed	1.3.6.1.4.1.18.3.4.26.2.1.15	integer	read-only	the number of seconds since the beginning of the far end current interval
wfDsx3CurrentValidIntervals	1.3.6.1.4.1.18.3.4.26.2.1.16	integer	read-only	the number of previous far end intervals for which valid data is available
wfDsx3CurrentValidFlag	1.3.6.1.4.1.18.3.4.26.2.1.17	integer	read-only	Indicates whether this interval reported by the Mib Table is valid or invalid. Enumeration: 'valid': 1, 'invalid': 2.
wfDsx3IntervalTable	1.3.6.1.4.1.18.3.4.26.3		no-access	The DS3/E3 Interval table
wfDsx3IntervalEntry	1.3.6.1.4.1.18.3.4.26.3.1		no-access	per circuit DS3/E3 interval objects - wfDsx3IntervalIndex corresponds to Wellfleet circuit number, wfDsx3IntervalNumber is the numbered previous 15-minute interval
wfDsx3IntervalIndex	1.3.6.1.4.1.18.3.4.26.3.1.1	integer	read-only	this corresponds to the Wellfleet circuit number
wfDsx3IntervalNumber	1.3.6.1.4.1.18.3.4.26.3.1.2	integer	read-only	1..96 where 1 is the most recent 15-minute interval and 96 is the least
wfDsx3IntervalPESs	1.3.6.1.4.1.18.3.4.26.3.1.3	gauge	read-only	the number of P-bit Errored Seconds in the specified interval
wfDsx3IntervalPSESs	1.3.6.1.4.1.18.3.4.26.3.1.4	gauge	read-only	the number of P-bit Severely Errored Seconds in the specified interval
wfDsx3IntervalSEFSs	1.3.6.1.4.1.18.3.4.26.3.1.5	gauge	read-only	the number of Severely Errored Framing Seconds in the specified interval
wfDsx3IntervalUASs	1.3.6.1.4.1.18.3.4.26.3.1.6	gauge	read-only	the number of Unavailable Seconds in the specified interval
wfDsx3IntervalLCVs	1.3.6.1.4.1.18.3.4.26.3.1.7	gauge	read-only	the number of Line Coding Violations in the specified interval
wfDsx3IntervalPCVs	1.3.6.1.4.1.18.3.4.26.3.1.8	gauge	read-only	the number of P-bit Coding Violations in the specified interval
wfDsx3IntervalLESs	1.3.6.1.4.1.18.3.4.26.3.1.9	gauge	read-only	the number of Line Errored Seconds in the specified interval
wfDsx3IntervalCCVs	1.3.6.1.4.1.18.3.4.26.3.1.10	gauge	read-only	the number of C-bit Coding Violations in the specified interval
wfDsx3IntervalCESs	1.3.6.1.4.1.18.3.4.26.3.1.11	gauge	read-only	the number of C-bit Errored Seconds in the specified interval
wfDsx3IntervalCSESs	1.3.6.1.4.1.18.3.4.26.3.1.12	gauge	read-only	the number of C-bit Severely Errored Seconds in the specified interval
wfDsx3IntervalSASs	1.3.6.1.4.1.18.3.4.26.3.1.13	gauge	read-only	the number of Seconds containing one or more SEFs or AIS defects in the specified interval
wfDsx3IntervalAISSs	1.3.6.1.4.1.18.3.4.26.3.1.14	gauge	read-only	the number of Seconds containing one or more AIS defect in the specified interval
wfDsx3IntervalFCs	1.3.6.1.4.1.18.3.4.26.3.1.15	gauge	read-only	the number of Path Failure Count error events detected in the specified interval
wfDsx3IntervalValidFlag	1.3.6.1.4.1.18.3.4.26.3.1.16	integer	read-only	Indicates whether this interval reported by the Mib Table is valid or invalid. Enumeration: 'valid': 1, 'invalid': 2.
wfDsx3TotalTable	1.3.6.1.4.1.18.3.4.26.4		no-access	The DS3/E3 Total table
wfDsx3TotalEntry	1.3.6.1.4.1.18.3.4.26.4.1		no-access	per circuit DS3/E3 total objects - wfDsx3TotalIndex corresponds to Wellfleet circuit number
wfDsx3TotalIndex	1.3.6.1.4.1.18.3.4.26.4.1.1	integer	read-only	this corresponds to the Wellfleet circuit number
wfDsx3TotalPESs	1.3.6.1.4.1.18.3.4.26.4.1.2	gauge	read-only	the number of P-bit Errored Seconds in the last 24 hours
wfDsx3TotalPSESs	1.3.6.1.4.1.18.3.4.26.4.1.3	gauge	read-only	the number of P-bit Severely Errored Seconds in the last 24 hours
wfDsx3TotalSEFSs	1.3.6.1.4.1.18.3.4.26.4.1.4	gauge	read-only	the number of Severely Errored Framing Seconds in the last 24 hours
wfDsx3TotalUASs	1.3.6.1.4.1.18.3.4.26.4.1.5	gauge	read-only	the number of Unavailable Seconds in the last 24 hours
wfDsx3TotalLCVs	1.3.6.1.4.1.18.3.4.26.4.1.6	gauge	read-only	the number of Line Coding Violations in the last 24 hours
wfDsx3TotalPCVs	1.3.6.1.4.1.18.3.4.26.4.1.7	gauge	read-only	the number of P-bit Coding Violations in the last 24 hours
wfDsx3TotalLESs	1.3.6.1.4.1.18.3.4.26.4.1.8	gauge	read-only	the number of Line Errored Seconds in the last 24 hours
wfDsx3TotalCCVs	1.3.6.1.4.1.18.3.4.26.4.1.9	gauge	read-only	the number of C-bit Coding Violations in the last 24 hours
wfDsx3TotalCESs	1.3.6.1.4.1.18.3.4.26.4.1.10	gauge	read-only	the number of C-bit Errored Seconds in the last 24 hours
wfDsx3TotalCSESs	1.3.6.1.4.1.18.3.4.26.4.1.11	gauge	read-only	the number of C-bit Severely Errored Seconds in the last 24 hours
wfDsx3TotalSASs	1.3.6.1.4.1.18.3.4.26.4.1.12	gauge	read-only	the number of Seconds containing one or more SEFs or AIS defects in the last 24 hours
wfDsx3TotalAISSs	1.3.6.1.4.1.18.3.4.26.4.1.13	gauge	read-only	the number of Seconds containing one or more AIS defect in the last 24 hours
wfDsx3TotalFCs	1.3.6.1.4.1.18.3.4.26.4.1.14	gauge	read-only	the number of Path Failure Count error events detected in the last 24 hours
wfDsx3TotalValidFlag	1.3.6.1.4.1.18.3.4.26.4.1.15	integer	read-only	Indicates whether this interval reported by the Mib Table is valid or invalid. Enumeration: 'valid': 1, 'invalid': 2.
wfDsx3FarEndConfigTable	1.3.6.1.4.1.18.3.4.26.5		no-access	The DS3/E3 Far End Configuration table
wfDsx3FarEndConfigEntry	1.3.6.1.4.1.18.3.4.26.5.1		no-access	per circuit DS3/E3 far end config objects - wfDsx3FarEndLineIndex corresponds to Wellfleet circuit number
wfDsx3FarEndLineIndex	1.3.6.1.4.1.18.3.4.26.5.1.1	integer	read-only	this corresponds to the Wellfleet circuit number
wfDsx3FarEndEquipCode	1.3.6.1.4.1.18.3.4.26.5.1.2	displaystring	read-write	equipment description code - C-bit parity only
wfDsx3FarEndLocationIDCode	1.3.6.1.4.1.18.3.4.26.5.1.3	displaystring	read-write	equipment location code - C-bit parity only
wfDsx3FarEndFrameIDCode	1.3.6.1.4.1.18.3.4.26.5.1.4	displaystring	read-write	code for the equipment location within a building
wfDsx3FarEndUnitCode	1.3.6.1.4.1.18.3.4.26.5.1.5	displaystring	read-write	code for the equipment location within a bay
wfDsx3FarEndFacilityIDCode	1.3.6.1.4.1.18.3.4.26.5.1.6	displaystring	read-write	path identification code
wfDsx3FarEndCurrentTable	1.3.6.1.4.1.18.3.4.26.6		no-access	The DS3/E3 Far End Current table
wfDsx3FarEndCurrentEntry	1.3.6.1.4.1.18.3.4.26.6.1		no-access	per circuit DS3/E3 far end current objects wfDsx3FarEndCurrentIndex corresponds to Wellfleet circuit number
wfDsx3FarEndCurrentIndex	1.3.6.1.4.1.18.3.4.26.6.1.1	integer	read-only	this corresponds to the Wellfleet circuit number
wfDsx3FarEndTimeElapsed	1.3.6.1.4.1.18.3.4.26.6.1.2	integer	read-only	the number of seconds since the beginning of the far end current interval
wfDsx3FarEndValidIntervals	1.3.6.1.4.1.18.3.4.26.6.1.3	integer	read-only	the number of previous far end intervals for which valid data is available
wfDsx3FarEndCurrentCESs	1.3.6.1.4.1.18.3.4.26.6.1.4	gauge	read-only	the number of C-bit Errored Seconds in the current far end interval
wfDsx3FarEndCurrentCSESs	1.3.6.1.4.1.18.3.4.26.6.1.5	gauge	read-only	the number of C-bit Severely Errored Seconds in the current far end interval
wfDsx3FarEndCurrentCCVs	1.3.6.1.4.1.18.3.4.26.6.1.6	gauge	read-only	the number of C-bit Coding Violations in the current far end interval
wfDsx3FarEndCurrentUASs	1.3.6.1.4.1.18.3.4.26.6.1.7	gauge	read-only	the number of Unavailable Seconds in the current far end interval
wfDsx3FarEndCurrentSASs	1.3.6.1.4.1.18.3.4.26.6.1.8	gauge	read-only	the number of Seconds containing one or more SEFs or AIS defects in the current far end interval
wfDsx3FarEndCurrentFCs	1.3.6.1.4.1.18.3.4.26.6.1.9	gauge	read-only	the number of Path Failure Count error events detected in the current far end interval
wfDsx3FarEndCurrentValidFlag	1.3.6.1.4.1.18.3.4.26.6.1.10	integer	read-only	Indicates whether this interval reported by the Mib Table is valid or invalid. Enumeration: 'valid': 1, 'invalid': 2.
wfDsx3FarEndIntervalTable	1.3.6.1.4.1.18.3.4.26.7		no-access	The DS3/E3 Far End Interval table
wfDsx3FarEndIntervalEntry	1.3.6.1.4.1.18.3.4.26.7.1		no-access	per circuit DS3/E3 far end interval objects - wfDsx3FarEndIntervalIndex corresponds to Wellfleet circuit number, wfDsx3FarEndIntervalNumber is the numbered previous 15-minute interval
wfDsx3FarEndIntervalIndex	1.3.6.1.4.1.18.3.4.26.7.1.1	integer	read-only	this corresponds to the Wellfleet circuit number
wfDsx3FarEndIntervalNumber	1.3.6.1.4.1.18.3.4.26.7.1.2	integer	read-only	1..96 where 1 is the most recent 15-minute interval and 96 is the least
wfDsx3FarEndIntervalCESs	1.3.6.1.4.1.18.3.4.26.7.1.3	gauge	read-only	the count of C-bit Errored Seconds in the specified interval
wfDsx3FarEndIntervalCSESs	1.3.6.1.4.1.18.3.4.26.7.1.4	gauge	read-only	the count of C-bit Severely Errored Seconds in the specified interval
wfDsx3FarEndIntervalCCVs	1.3.6.1.4.1.18.3.4.26.7.1.5	gauge	read-only	the count of C-bit Code Violation error events in the specified interval
wfDsx3FarEndIntervalUASs	1.3.6.1.4.1.18.3.4.26.7.1.6	gauge	read-only	the count of Unavailable Seconds in the specified interval
wfDsx3FarEndIntervalSASs	1.3.6.1.4.1.18.3.4.26.7.1.7	gauge	read-only	the number of Seconds containing one or more SEFs or AIS defects in the specified far end interval
wfDsx3FarEndIntervalFCs	1.3.6.1.4.1.18.3.4.26.7.1.8	gauge	read-only	the number of Path Failure Count error events detected in the specified far end interval
wfDsx3FarEndIntervalValidFlag	1.3.6.1.4.1.18.3.4.26.7.1.9	integer	read-only	Indicates whether this interval reported by the Mib Table is valid or invalid. Enumeration: 'valid': 1, 'invalid': 2.
wfDsx3FarEndTotalTable	1.3.6.1.4.1.18.3.4.26.8		no-access	The DS3/E3 Far End Total table
wfDsx3FarEndTotalEntry	1.3.6.1.4.1.18.3.4.26.8.1		no-access	per circuit far end DS3/E3 total objects - wfDsx3FarEndTotalIndex corresponds to Wellfleet circuit number
wfDsx3FarEndTotalIndex	1.3.6.1.4.1.18.3.4.26.8.1.1	integer	read-only	this corresponds to the Wellfleet circuit number
wfDsx3FarEndTotalCESs	1.3.6.1.4.1.18.3.4.26.8.1.2	gauge	read-only	total count of C-bit Errored Seconds
wfDsx3FarEndTotalCSESs	1.3.6.1.4.1.18.3.4.26.8.1.3	gauge	read-only	total count of C-bit Severely Errored Seconds
wfDsx3FarEndTotalCCVs	1.3.6.1.4.1.18.3.4.26.8.1.4	gauge	read-only	total count of C-bit Code Violation error events
wfDsx3FarEndTotalUASs	1.3.6.1.4.1.18.3.4.26.8.1.5	gauge	read-only	total count of Unavailable Seconds
wfDsx3FarEndTotalSASs	1.3.6.1.4.1.18.3.4.26.8.1.6	gauge	read-only	the number of Seconds containing one or more SEFs or AIS defects at the far end in the last 24 hours.
wfDsx3FarEndTotalFCs	1.3.6.1.4.1.18.3.4.26.8.1.7	gauge	read-only	the number of Path Failure Count error events detected at the far end in the last 24 hours.
wfDsx3FarEndTotalValidFlag	1.3.6.1.4.1.18.3.4.26.8.1.8	integer	read-only	Indicates whether this interval reported by the Mib Table is valid or invalid. Enumeration: 'valid': 1, 'invalid': 2.
wfAtmInterfaceDs3PlcpTable	1.3.6.1.4.1.18.3.4.26.9		no-access	The Atm Interface DS3 PLCP table
wfAtmInterfaceDs3PlcpEntry	1.3.6.1.4.1.18.3.4.26.9.1		no-access	This table contains ATM interface DS3 PLCP parameters and state variables, one entry per ATM interface port.
wfAtmInterfaceDs3PlcpIndex	1.3.6.1.4.1.18.3.4.26.9.1.1	integer	read-only	this corresponds to the Wellfleet circuit number
wfAtmInterfaceDs3PlcpSEFSs	1.3.6.1.4.1.18.3.4.26.9.1.2	gauge	read-only	the number of DS3 PLCP Severely Errored Framing Second (SEFS)
wfAtmInterfaceDs3PlcpAlarmState	1.3.6.1.4.1.18.3.4.26.9.1.3	integer	read-only	the state of the DS3 PLCP Enumeration: 'farendalarm': 2, 'noalarm': 1, 'lof': 3.
wfAtmInterfaceDs3PlcpUASs	1.3.6.1.4.1.18.3.4.26.9.1.4	gauge	read-only	the number of Unavailable Seconds encountered by the PLCP
wfDsx3DayCurrentTable	1.3.6.1.4.1.18.3.4.26.11		no-access	The DS3/E3 Current table
wfDsx3DayCurrentEntry	1.3.6.1.4.1.18.3.4.26.11.1		no-access	per circuit DS3/E3 current objects - wfDsx3DayCurrentIndex corresponds to Wellfleet circuit number
wfDsx3DayCurrentIndex	1.3.6.1.4.1.18.3.4.26.11.1.1	integer	read-only	this corresponds to the Wellfleet circuit number
wfDsx3DayCurrentPESs	1.3.6.1.4.1.18.3.4.26.11.1.2	gauge	read-only	the number of P-bit Errored Seconds in the current interval
wfDsx3DayCurrentPSESs	1.3.6.1.4.1.18.3.4.26.11.1.3	gauge	read-only	the number of P-bit Severely Errored Seconds in the current interval
wfDsx3DayCurrentSEFSs	1.3.6.1.4.1.18.3.4.26.11.1.4	gauge	read-only	the number of Severely Errored Framing Seconds in the current interval
wfDsx3DayCurrentUASs	1.3.6.1.4.1.18.3.4.26.11.1.5	gauge	read-only	the number of Unavailable Seconds in the current interval
wfDsx3DayCurrentLCVs	1.3.6.1.4.1.18.3.4.26.11.1.6	gauge	read-only	the number of Line Coding Violations in the current interval
wfDsx3DayCurrentPCVs	1.3.6.1.4.1.18.3.4.26.11.1.7	gauge	read-only	the number of P-bit Coding Violations in the current interval
wfDsx3DayCurrentLESs	1.3.6.1.4.1.18.3.4.26.11.1.8	gauge	read-only	the number of Line Errored Seconds in the current interval
wfDsx3DayCurrentCCVs	1.3.6.1.4.1.18.3.4.26.11.1.9	gauge	read-only	the number of C-bit Coding Violations in the current interval
wfDsx3DayCurrentCESs	1.3.6.1.4.1.18.3.4.26.11.1.10	gauge	read-only	the number of C-bit Errored Seconds in the current interval
wfDsx3DayCurrentCSESs	1.3.6.1.4.1.18.3.4.26.11.1.11	gauge	read-only	the number of C-bit Severely Errored Seconds in the current interval
wfDsx3DayCurrentSASs	1.3.6.1.4.1.18.3.4.26.11.1.12	gauge	read-only	the number of Seconds containing one or more SEFs or AIS defects in the current interval
wfDsx3DayCurrentAISSs	1.3.6.1.4.1.18.3.4.26.11.1.13	gauge	read-only	the number of Seconds containing one or more AIS defect in the current interval
wfDsx3DayCurrentFCs	1.3.6.1.4.1.18.3.4.26.11.1.14	gauge	read-only	the number of Path Failure Count error events detected in the current interval
wfDsx3DayCurrentTimeElapsed	1.3.6.1.4.1.18.3.4.26.11.1.15	integer	read-only	the number of seconds since the beginning of the far end current interval
wfDsx3DayCurrentValidIntervals	1.3.6.1.4.1.18.3.4.26.11.1.16	integer	read-only	the number of previous far end intervals for which valid data is available
wfDsx3DayCurrentValidFlag	1.3.6.1.4.1.18.3.4.26.11.1.17	integer	read-only	Indicates whether this interval reported by the Mib Table is valid or invalid. Enumeration: 'valid': 1, 'invalid': 2.
wfDsx3DayIntervalTable	1.3.6.1.4.1.18.3.4.26.12		no-access	The DS3/E3 Interval table
wfDsx3DayIntervalEntry	1.3.6.1.4.1.18.3.4.26.12.1		no-access	per circuit DS3/E3 interval objects - wfDsx3DayIntervalIndex corresponds to Wellfleet circuit number, wfDsx3DayIntervalNumber is the numbered previous 15-minute interval
wfDsx3DayIntervalIndex	1.3.6.1.4.1.18.3.4.26.12.1.1	integer	read-only	this corresponds to the Wellfleet circuit number
wfDsx3DayIntervalNumber	1.3.6.1.4.1.18.3.4.26.12.1.2	integer	read-only	1..96 where 1 is the most recent 15-minute interval and 96 is the least
wfDsx3DayIntervalPESs	1.3.6.1.4.1.18.3.4.26.12.1.3	gauge	read-only	the number of P-bit Errored Seconds in the specified interval
wfDsx3DayIntervalPSESs	1.3.6.1.4.1.18.3.4.26.12.1.4	gauge	read-only	the number of P-bit Severely Errored Seconds in the specified interval
wfDsx3DayIntervalSEFSs	1.3.6.1.4.1.18.3.4.26.12.1.5	gauge	read-only	the number of Severely Errored Framing Seconds in the specified interval
wfDsx3DayIntervalUASs	1.3.6.1.4.1.18.3.4.26.12.1.6	gauge	read-only	the number of Unavailable Seconds in the specified interval
wfDsx3DayIntervalLCVs	1.3.6.1.4.1.18.3.4.26.12.1.7	gauge	read-only	the number of Line Coding Violations in the specified interval
wfDsx3DayIntervalPCVs	1.3.6.1.4.1.18.3.4.26.12.1.8	gauge	read-only	the number of P-bit Coding Violations in the specified interval
wfDsx3DayIntervalLESs	1.3.6.1.4.1.18.3.4.26.12.1.9	gauge	read-only	the number of Line Errored Seconds in the specified interval
wfDsx3DayIntervalCCVs	1.3.6.1.4.1.18.3.4.26.12.1.10	gauge	read-only	the number of C-bit Coding Violations in the specified interval
wfDsx3DayIntervalCESs	1.3.6.1.4.1.18.3.4.26.12.1.11	gauge	read-only	the number of C-bit Errored Seconds in the specified interval
wfDsx3DayIntervalCSESs	1.3.6.1.4.1.18.3.4.26.12.1.12	gauge	read-only	the number of C-bit Severely Errored Seconds in the specified interval
wfDsx3DayIntervalSASs	1.3.6.1.4.1.18.3.4.26.12.1.13	gauge	read-only	the number of Seconds containing one or more SEFs or AIS defects in the specified interval
wfDsx3DayIntervalAISSs	1.3.6.1.4.1.18.3.4.26.12.1.14	gauge	read-only	the number of Seconds containing one or more AIS defect in the specified interval
wfDsx3DayIntervalFCs	1.3.6.1.4.1.18.3.4.26.12.1.15	gauge	read-only	the number of Path Failure Count error events detected in the specified interval
wfDsx3DayIntervalValidFlag	1.3.6.1.4.1.18.3.4.26.12.1.16	integer	read-only	Indicates whether this interval reported by the Mib Table is valid or invalid. Enumeration: 'valid': 1, 'invalid': 2.
wfDsx3DayTotalTable	1.3.6.1.4.1.18.3.4.26.13		no-access	The DS3/E3 Total table
wfDsx3DayTotalEntry	1.3.6.1.4.1.18.3.4.26.13.1		no-access	per circuit DS3/E3 total objects - wfDsx3DayTotalIndex corresponds to Wellfleet circuit number
wfDsx3DayTotalIndex	1.3.6.1.4.1.18.3.4.26.13.1.1	integer	read-only	this corresponds to the Wellfleet circuit number
wfDsx3DayTotalPESs	1.3.6.1.4.1.18.3.4.26.13.1.2	gauge	read-only	the number of P-bit Errored Seconds in the last 24 hours
wfDsx3DayTotalPSESs	1.3.6.1.4.1.18.3.4.26.13.1.3	gauge	read-only	the number of P-bit Severely Errored Seconds in the last 24 hours
wfDsx3DayTotalSEFSs	1.3.6.1.4.1.18.3.4.26.13.1.4	gauge	read-only	the number of Severely Errored Framing Seconds in the last 24 hours
wfDsx3DayTotalUASs	1.3.6.1.4.1.18.3.4.26.13.1.5	gauge	read-only	the number of Unavailable Seconds in the last 24 hours
wfDsx3DayTotalLCVs	1.3.6.1.4.1.18.3.4.26.13.1.6	gauge	read-only	the number of Line Coding Violations in the last 24 hours
wfDsx3DayTotalPCVs	1.3.6.1.4.1.18.3.4.26.13.1.7	gauge	read-only	the number of P-bit Coding Violations in the last 24 hours
wfDsx3DayTotalLESs	1.3.6.1.4.1.18.3.4.26.13.1.8	gauge	read-only	the number of Line Errored Seconds in the last 24 hours
wfDsx3DayTotalCCVs	1.3.6.1.4.1.18.3.4.26.13.1.9	gauge	read-only	the number of C-bit Coding Violations in the last 24 hours
wfDsx3DayTotalCESs	1.3.6.1.4.1.18.3.4.26.13.1.10	gauge	read-only	the number of C-bit Errored Seconds in the last 24 hours
wfDsx3DayTotalCSESs	1.3.6.1.4.1.18.3.4.26.13.1.11	gauge	read-only	the number of C-bit Severely Errored Seconds in the last 24 hours
wfDsx3DayTotalSASs	1.3.6.1.4.1.18.3.4.26.13.1.12	gauge	read-only	the number of Seconds containing one or more SEFs or AIS defects in the last 24 hours
wfDsx3DayTotalAISSs	1.3.6.1.4.1.18.3.4.26.13.1.13	gauge	read-only	the number of Seconds containing one or more AIS defect in the last 24 hours
wfDsx3DayTotalFCs	1.3.6.1.4.1.18.3.4.26.13.1.14	gauge	read-only	the number of Path Failure Count error events detected in the last 24 hours
wfDsx3DayTotalValidFlag	1.3.6.1.4.1.18.3.4.26.13.1.15	integer	read-only	Indicates whether this interval reported by the Mib Table is valid or invalid. Enumeration: 'valid': 1, 'invalid': 2.
wfDsx3FarEndDayCurrentTable	1.3.6.1.4.1.18.3.4.26.14		no-access	The DS3/E3 Far End Current table
wfDsx3FarEndDayCurrentEntry	1.3.6.1.4.1.18.3.4.26.14.1		no-access	per circuit DS3/E3 far end current objects wfDsx3FarEndDayCurrentIndex corresponds to Wellfleet circuit number
wfDsx3FarEndDayCurrentIndex	1.3.6.1.4.1.18.3.4.26.14.1.1	integer	read-only	this corresponds to the Wellfleet circuit number
wfDsx3FarEndDayTimeElapsed	1.3.6.1.4.1.18.3.4.26.14.1.2	integer	read-only	the number of seconds since the beginning of the far end current interval
wfDsx3FarEndDayValidIntervals	1.3.6.1.4.1.18.3.4.26.14.1.3	integer	read-only	the number of previous far end intervals for which valid data is available
wfDsx3FarEndDayCurrentCESs	1.3.6.1.4.1.18.3.4.26.14.1.4	gauge	read-only	the number of C-bit Errored Seconds in the current far end interval
wfDsx3FarEndDayCurrentCSESs	1.3.6.1.4.1.18.3.4.26.14.1.5	gauge	read-only	the number of C-bit Severely Errored Seconds in the current far end interval
wfDsx3FarEndDayCurrentCCVs	1.3.6.1.4.1.18.3.4.26.14.1.6	gauge	read-only	the number of C-bit Coding Violations in the current far end interval
wfDsx3FarEndDayCurrentUASs	1.3.6.1.4.1.18.3.4.26.14.1.7	gauge	read-only	the number of Unavailable Seconds in the current far end interval
wfDsx3FarEndDayCurrentSASs	1.3.6.1.4.1.18.3.4.26.14.1.8	gauge	read-only	the number of Seconds containing one or more SEFs or AIS defects in the current far end interval
wfDsx3FarEndDayCurrentFCs	1.3.6.1.4.1.18.3.4.26.14.1.9	gauge	read-only	the number of Path Failure Count error events detected in the current far end interval
wfDsx3FarEndDayCurrentValidFlag	1.3.6.1.4.1.18.3.4.26.14.1.10	integer	read-only	Indicates whether this interval reported by the Mib Table is valid or invalid. Enumeration: 'valid': 1, 'invalid': 2.
wfDsx3FarEndDayIntervalTable	1.3.6.1.4.1.18.3.4.26.15		no-access	The DS3/E3 Far End Interval table
wfDsx3FarEndDayIntervalEntry	1.3.6.1.4.1.18.3.4.26.15.1		no-access	per circuit DS3/E3 far end interval objects - wfDsx3FarEndDayIntervalIndex corresponds to Wellfleet circuit number, wfDsx3FarEndDayIntervalNumber is the numbered previous 15-minute interval
wfDsx3FarEndDayIntervalIndex	1.3.6.1.4.1.18.3.4.26.15.1.1	integer	read-only	this corresponds to the Wellfleet circuit number
wfDsx3FarEndDayIntervalNumber	1.3.6.1.4.1.18.3.4.26.15.1.2	integer	read-only	1..96 where 1 is the most recent 15-minute interval and 96 is the least
wfDsx3FarEndDayIntervalCESs	1.3.6.1.4.1.18.3.4.26.15.1.3	gauge	read-only	the count of C-bit Errored Seconds in the specified interval
wfDsx3FarEndDayIntervalCSESs	1.3.6.1.4.1.18.3.4.26.15.1.4	gauge	read-only	the count of C-bit Severely Errored Seconds in the specified interval
wfDsx3FarEndDayIntervalCCVs	1.3.6.1.4.1.18.3.4.26.15.1.5	gauge	read-only	the count of C-bit Code Violation error events in the specified interval
wfDsx3FarEndDayIntervalUASs	1.3.6.1.4.1.18.3.4.26.15.1.6	gauge	read-only	the count of Unavailable Seconds in the specified interval
wfDsx3FarEndDayIntervalSASs	1.3.6.1.4.1.18.3.4.26.15.1.7	gauge	read-only	the number of Seconds containing one or more SEFs or AIS defects in the specified far end interval
wfDsx3FarEndDayIntervalFCs	1.3.6.1.4.1.18.3.4.26.15.1.8	gauge	read-only	the number of Path Failure Count error events detected in the specified far end interval
wfDsx3FarEndDayIntervalValidFlag	1.3.6.1.4.1.18.3.4.26.15.1.9	integer	read-only	Indicates whether this interval reported by the Mib Table is valid or invalid. Enumeration: 'valid': 1, 'invalid': 2.
wfDsx3FarEndDayTotalTable	1.3.6.1.4.1.18.3.4.26.16		no-access	The DS3/E3 Far End Total table
wfDsx3FarEndDayTotalEntry	1.3.6.1.4.1.18.3.4.26.16.1		no-access	per circuit far end DS3/E3 total objects - wfDsx3FarEndDayTotalIndex corresponds to Wellfleet circuit number
wfDsx3FarEndDayTotalIndex	1.3.6.1.4.1.18.3.4.26.16.1.1	integer	read-only	this corresponds to the Wellfleet circuit number
wfDsx3FarEndDayTotalCESs	1.3.6.1.4.1.18.3.4.26.16.1.2	gauge	read-only	total count of C-bit Errored Seconds
wfDsx3FarEndDayTotalCSESs	1.3.6.1.4.1.18.3.4.26.16.1.3	gauge	read-only	total count of C-bit Severely Errored Seconds
wfDsx3FarEndDayTotalCCVs	1.3.6.1.4.1.18.3.4.26.16.1.4	gauge	read-only	total count of C-bit Code Violation error events
wfDsx3FarEndDayTotalUASs	1.3.6.1.4.1.18.3.4.26.16.1.5	gauge	read-only	total count of Unavailable Seconds
wfDsx3FarEndDayTotalSASs	1.3.6.1.4.1.18.3.4.26.16.1.6	gauge	read-only	the number of Seconds containing one or more SEFs or AIS defects at the far end in the last 24 hours.
wfDsx3FarEndDayTotalFCs	1.3.6.1.4.1.18.3.4.26.16.1.7	gauge	read-only	the number of Path Failure Count error events detected at the far end in the last 24 hours.
wfDsx3FarEndDayTotalValidFlag	1.3.6.1.4.1.18.3.4.26.16.1.8	integer	read-only	Indicates whether this interval reported by the Mib Table is valid or invalid. Enumeration: 'valid': 1, 'invalid': 2.
wfDsx3ThrAlrtTable	1.3.6.1.4.1.18.3.4.26.18		no-access	Current statistics Alarm Threshold Crossing table.
wfDsx3ThrAlrtEntry	1.3.6.1.4.1.18.3.4.26.18.1		no-access	An entry in the Dsx3 ThrAlrt table
wfDsx3ThrAlrtDelete	1.3.6.1.4.1.18.3.4.26.18.1.1	integer	read-write	Create/Delete parameter Enumeration: 'deleted': 2, 'created': 1.
wfDsx3ThrAlrtIndex	1.3.6.1.4.1.18.3.4.26.18.1.2	integer	read-only	The instance ID that identifies the port.
wfDsx3ThrAlrtPESs	1.3.6.1.4.1.18.3.4.26.18.1.3	gauge	read-write	The number of P-bit Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3ThrAlrtPSESs	1.3.6.1.4.1.18.3.4.26.18.1.4	gauge	read-write	The number of P-bit Severely Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3ThrAlrtSEFSs	1.3.6.1.4.1.18.3.4.26.18.1.5	gauge	read-write	The number of Severely Errored Framing Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3ThrAlrtUASs	1.3.6.1.4.1.18.3.4.26.18.1.6	gauge	read-write	The number of Unavailable Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3ThrAlrtLCVs	1.3.6.1.4.1.18.3.4.26.18.1.7	gauge	read-write	The number of Line Coding Violations which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3ThrAlrtPCVs	1.3.6.1.4.1.18.3.4.26.18.1.8	gauge	read-write	The number of P-bit Coding Violations which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3ThrAlrtLESs	1.3.6.1.4.1.18.3.4.26.18.1.9	gauge	read-write	The number of Line Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3ThrAlrtCCVs	1.3.6.1.4.1.18.3.4.26.18.1.10	gauge	read-write	The number of C-bit Coding Violations which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3ThrAlrtCESs	1.3.6.1.4.1.18.3.4.26.18.1.11	gauge	read-write	The number of C-bit Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3ThrAlrtCSESs	1.3.6.1.4.1.18.3.4.26.18.1.12	gauge	read-write	The number of C-bit Severely Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3ThrAlrtSASs	1.3.6.1.4.1.18.3.4.26.18.1.13	gauge	read-write	The number of SEF/AIS Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3ThrAlrtAISSs	1.3.6.1.4.1.18.3.4.26.18.1.14	gauge	read-write	The number of AIS defect Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3ThrAlrtFCs	1.3.6.1.4.1.18.3.4.26.18.1.15	gauge	read-write	The number of Path Failure Counts which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3FarEndThrAlrtTable	1.3.6.1.4.1.18.3.4.26.19		no-access	Current Far End statistics Alarm Threshold Crossing table.
wfDsx3FarEndThrAlrtEntry	1.3.6.1.4.1.18.3.4.26.19.1		no-access	An entry in the Dsx3 ThrAlrt table
wfDsx3FarEndThrAlrtDelete	1.3.6.1.4.1.18.3.4.26.19.1.1	integer	read-write	Create/Delete parameter Enumeration: 'deleted': 2, 'created': 1.
wfDsx3FarEndThrAlrtIndex	1.3.6.1.4.1.18.3.4.26.19.1.2	integer	read-only	The instance ID that identifies the port.
wfDsx3FarEndThrAlrtCESs	1.3.6.1.4.1.18.3.4.26.19.1.3	gauge	read-write	The number of C-bit Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3FarEndThrAlrtCSESs	1.3.6.1.4.1.18.3.4.26.19.1.4	gauge	read-write	The number of C-bit Severely Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3FarEndThrAlrtCCVs	1.3.6.1.4.1.18.3.4.26.19.1.5	gauge	read-write	The number of C-bit Coding Violations which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3FarEndThrAlrtUASs	1.3.6.1.4.1.18.3.4.26.19.1.6	gauge	read-write	The number of Unavailable Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3FarEndThrAlrtSASs	1.3.6.1.4.1.18.3.4.26.19.1.7	gauge	read-write	The number of SEF/AIS Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3FarEndThrAlrtFCs	1.3.6.1.4.1.18.3.4.26.19.1.8	gauge	read-write	The number of Path Failure Counts which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3DayThrAlrtTable	1.3.6.1.4.1.18.3.4.26.20		no-access	Current Day statistics Alarm Threshold Crossing table.
wfDsx3DayThrAlrtEntry	1.3.6.1.4.1.18.3.4.26.20.1		no-access	An entry in the Dsx3 ThrAlrt table
wfDsx3DayThrAlrtDelete	1.3.6.1.4.1.18.3.4.26.20.1.1	integer	read-write	Create/Delete parameter Enumeration: 'deleted': 2, 'created': 1.
wfDsx3DayThrAlrtIndex	1.3.6.1.4.1.18.3.4.26.20.1.2	integer	read-only	The instance ID that identifies the port.
wfDsx3DayThrAlrtPESs	1.3.6.1.4.1.18.3.4.26.20.1.3	gauge	read-write	The number of P-bit Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3DayThrAlrtPSESs	1.3.6.1.4.1.18.3.4.26.20.1.4	gauge	read-write	The number of P-bit Severely Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3DayThrAlrtSEFSs	1.3.6.1.4.1.18.3.4.26.20.1.5	gauge	read-write	The number of Severely Errored Framing Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3DayThrAlrtUASs	1.3.6.1.4.1.18.3.4.26.20.1.6	gauge	read-write	The number of Unavailable Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3DayThrAlrtLCVs	1.3.6.1.4.1.18.3.4.26.20.1.7	gauge	read-write	The number of Line Coding Violations which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3DayThrAlrtPCVs	1.3.6.1.4.1.18.3.4.26.20.1.8	gauge	read-write	The number of P-bit Coding Violations which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3DayThrAlrtLESs	1.3.6.1.4.1.18.3.4.26.20.1.9	gauge	read-write	The number of Line Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3DayThrAlrtCCVs	1.3.6.1.4.1.18.3.4.26.20.1.10	gauge	read-write	The number of C-bit Coding Violations which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3DayThrAlrtCESs	1.3.6.1.4.1.18.3.4.26.20.1.11	gauge	read-write	The number of C-bit Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3DayThrAlrtCSESs	1.3.6.1.4.1.18.3.4.26.20.1.12	gauge	read-write	The number of C-bit Severely Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3DayThrAlrtSASs	1.3.6.1.4.1.18.3.4.26.20.1.13	gauge	read-write	The number of SEF/AIS Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3DayThrAlrtAISSs	1.3.6.1.4.1.18.3.4.26.20.1.14	gauge	read-write	The number of AIS defect Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3DayThrAlrtFCs	1.3.6.1.4.1.18.3.4.26.20.1.15	gauge	read-write	The number of Path Failure Counts which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3FarEndDayThrAlrtTable	1.3.6.1.4.1.18.3.4.26.21		no-access	Current Far End Day statistics Alarm Threshold Crossing table.
wfDsx3FarEndDayThrAlrtEntry	1.3.6.1.4.1.18.3.4.26.21.1		no-access	An entry in the Dsx3 ThrAlrt table
wfDsx3FarEndDayThrAlrtDelete	1.3.6.1.4.1.18.3.4.26.21.1.1	integer	read-write	Create/Delete parameter Enumeration: 'deleted': 2, 'created': 1.
wfDsx3FarEndDayThrAlrtIndex	1.3.6.1.4.1.18.3.4.26.21.1.2	integer	read-only	The instance ID that identifies the port.
wfDsx3FarEndDayThrAlrtCESs	1.3.6.1.4.1.18.3.4.26.21.1.3	gauge	read-write	The number of C-bit Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3FarEndDayThrAlrtCSESs	1.3.6.1.4.1.18.3.4.26.21.1.4	gauge	read-write	The number of C-bit Severely Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3FarEndDayThrAlrtCCVs	1.3.6.1.4.1.18.3.4.26.21.1.5	gauge	read-write	The number of C-bit Coding Violations which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3FarEndDayThrAlrtUASs	1.3.6.1.4.1.18.3.4.26.21.1.6	gauge	read-write	The number of Unavailable Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3FarEndDayThrAlrtSASs	1.3.6.1.4.1.18.3.4.26.21.1.7	gauge	read-write	The number of SEF/AIS Seconds which must be received prior to the generation of a Threshold Crossing Alert.
wfDsx3FarEndDayThrAlrtFCs	1.3.6.1.4.1.18.3.4.26.21.1.8	gauge	read-write	The number of Path Failure Counts which must be received prior to the generation of a Threshold Crossing Alert.