Wellfleet-BISYNC-MIB: View SNMP OID List / Download MIB

VENDOR: WELLFLEET


 Home MIB: Wellfleet-BISYNC-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Wellfleet-COMMON-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wfBisyncTable 1.3.6.1.4.1.18.3.4.27.1 no-access
* BISYNC line record *
     wfBisyncEntry 1.3.6.1.4.1.18.3.4.27.1.1 no-access
An entry in the BISYNC table
         wfBisyncDelete 1.3.6.1.4.1.18.3.4.27.1.1.1 integer read-write
Create/Delete parameter Enumeration: 'deleted': 2, 'created': 1.
         wfBisyncDisable 1.3.6.1.4.1.18.3.4.27.1.1.2 integer read-write
Enable/Disable parameter Enumeration: 'disabled': 2, 'enabled': 1.
         wfBisyncCct 1.3.6.1.4.1.18.3.4.27.1.1.3 integer read-write
CCT number for this line instance
         wfBisyncMtu 1.3.6.1.4.1.18.3.4.27.1.1.4 integer read-write
MTU parameter, this is buffer size for BISYNC media, fixed
         wfBisyncMediaType 1.3.6.1.4.1.18.3.4.27.1.1.5 integer read-write
Media type selection is provided via this parameter Enumeration: 'default': 1, 'raisedtr': 2, 'v25bis': 3.
         wfBisyncCableType 1.3.6.1.4.1.18.3.4.27.1.1.6 integer read-write
Type of Cable attached to the Bisync port - this is needed for V.25bis and Raise DTR to properly communicate with the modem Enumeration: 'rs232': 1, 'x21': 4, 'v35': 3, 'rs422': 2.
         wfBisyncClkSource 1.3.6.1.4.1.18.3.4.27.1.1.7 integer read-write
Tx/Rx clock source is either internally or external generated. Enumeration: 'internal': 1, 'external': 2.
         wfBisyncClkSpeed 1.3.6.1.4.1.18.3.4.27.1.1.8 integer read-write
Tx/Rx clock speed. This speed selection is valid when either internal or external clocking is selected. In some cases, router software uses this attribute for route selection. If Priority Queuing is configured, it chooses queue depths based on this attribute. If internal clocking is selected, this attribute effects hardware initialization. If external clocking is selected, this attribute should be set to the speed that most closely corresponds to the speed of the external clock. Enumeration: 'clk19200b': 19230, 'clk1200b': 1200, 'clk2400b': 2401, 'clk9600b': 9615, 'clk4800b': 4807, 'clk7200b': 7204.
         wfBisyncService 1.3.6.1.4.1.18.3.4.27.1.1.9 integer read-write
Service Type selection is provided via this parameter. The supported services can be selected per interface. Enumeration: 'dlsw': 1, 'tunneling': 2.
         wfBisyncCfgTxQueueLength 1.3.6.1.4.1.18.3.4.27.1.1.10 integer read-write
Configured Transmit Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special meaning. Zero causes router based default values to be used. Values larger than the compiled ring size are truncated to the compiled ring size.
         wfBisyncCfgRxQueueLength 1.3.6.1.4.1.18.3.4.27.1.1.11 integer read-write
Configured Receive Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special meaning. Zero causes router based default values to be used. Values larger than the compiled ring size are truncated to the compiled ring size.
         wfBisyncCharMode 1.3.6.1.4.1.18.3.4.27.1.1.12 integer read-write
Control Character Mode - ASCII/EBCDIC Enumeration: 'ascii': 2, 'ebcdic': 1.
         wfBisyncLineNumber 1.3.6.1.4.1.18.3.4.27.1.1.13 integer read-write
line number for this line instance
         wfBisyncRtsEnable 1.3.6.1.4.1.18.3.4.27.1.1.14 integer read-write
The RTS parameter enables/disables detection of RTS signals on the interface. Normal default mode is running without RTS enabled Enumeration: 'disabled': 2, 'enabled': 1.
         wfBisyncExternalClkSpeed 1.3.6.1.4.1.18.3.4.27.1.1.15 integer read-write
External Clock Speed. If external clocking is configured, this attribute should be set to the clock speed of the externally supplied clock. Depending on the protocols configured in the interface, this value may control internal decision making in the router. In soe cases, router software uses this attribute for route selection. If Priority Queueing is configured, it chooses queue depths based on this attribute. This attribute has no effect when Internal Clocking is configured.
         wfBisyncModule 1.3.6.1.4.1.18.3.4.27.1.1.16 integer read-only
Module number for ASN platform, filled in by driver. For non-ASN platforms, this attribute will not be used Enumeration: 'four': 4, 'three': 3, 'two': 2, 'one': 1.
         wfBisyncActualConnector 1.3.6.1.4.1.18.3.4.27.1.1.17 integer read-only
Actual Connector Number for ASN platform, filled in by driver. For non-ASN platforms, this attribute will not be used. Enumeration: 'seven': 7, 'six': 6, 'three': 3, 'two': 2, 'four': 4, 'five': 5, 'eight': 8, 'one': 1.
         wfBisyncConnector 1.3.6.1.4.1.18.3.4.27.1.1.18 integer read-only
Instance ID Connector, filled in by driver. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute mm and 'connector' is defined in attribute cc of this table. For non-ASN platforms this attribute is the physical connector number on the slot. Enumeration: 'four': 4, 'three': 3, 'two': 2, 'one': 1.
         wfBisyncSlot 1.3.6.1.4.1.18.3.4.27.1.1.19 integer read-only
Instance ID Slot, filled in by driver
         wfBisyncActiveCct 1.3.6.1.4.1.18.3.4.27.1.1.20 integer read-only
Active CCT number for this line instance
         wfBisyncState 1.3.6.1.4.1.18.3.4.27.1.1.21 integer read-only
Line Driver state variable, Not Present, DSR Wait, Init, Down, Up Enumeration: 'down': 2, 'init': 3, 'up': 1, 'notpresent': 20, 'dsrwait': 4.
         wfBisyncLastState 1.3.6.1.4.1.18.3.4.27.1.1.22 integer read-only
The state which the driver was in prior to the most recent re-initiali- zation. Enumeration: 'down': 2, 'init': 3, 'up': 1, 'notpresent': 20, 'dsrwait': 4.
         wfBisyncRxOctets 1.3.6.1.4.1.18.3.4.27.1.1.23 counter read-only
Number of octets received without error
         wfBisyncTxOctets 1.3.6.1.4.1.18.3.4.27.1.1.24 counter read-only
Number of octets transmitted without error
         wfBisyncRxFrames 1.3.6.1.4.1.18.3.4.27.1.1.25 counter read-only
Number of frames received without error
         wfBisyncTxFrames 1.3.6.1.4.1.18.3.4.27.1.1.26 counter read-only
Number of frames transmitted without error
         wfBisyncRxErrors 1.3.6.1.4.1.18.3.4.27.1.1.27 counter read-only
Number of receive errors
         wfBisyncTxErrors 1.3.6.1.4.1.18.3.4.27.1.1.28 counter read-only
Number of transmission errors
         wfBisyncTxLackRescs 1.3.6.1.4.1.18.3.4.27.1.1.29 counter read-only
Number of frames clipped in driver's transmit routine due to transmit congestion.
         wfBisyncTxUnderFlows 1.3.6.1.4.1.18.3.4.27.1.1.30 counter read-only
Number of transmission underflows, device FIFO went empty before next DMA request was granted.
         wfBisyncRxOverFlows 1.3.6.1.4.1.18.3.4.27.1.1.31 counter read-only
Number of receive overflows, device FIFO overflowed before next DMA cycle granted. No buffer resources available.
         wfBisyncRxBadFrames 1.3.6.1.4.1.18.3.4.27.1.1.32 counter read-only
Number of bad receive frames, caused by FCS errors or non octet aligned.
         wfBisyncRxRunts 1.3.6.1.4.1.18.3.4.27.1.1.33 counter read-only
Number of runt frames received
         wfBisyncTxQueueLength 1.3.6.1.4.1.18.3.4.27.1.1.34 integer read-only
Current Transmit Queue Length.
         wfBisyncRxQueueLength 1.3.6.1.4.1.18.3.4.27.1.1.35 integer read-only
Current Receive Queue Length.
         wfBisyncRxReplenMisses 1.3.6.1.4.1.18.3.4.27.1.1.36 counter read-only
Number of packet buffer misses while attempting to replenish driver receive ring.
         wfBisyncLastChange 1.3.6.1.4.1.18.3.4.27.1.1.37 timeticks read-only
The value of the SysUptime at the time the interface entered it's current operational state (UP state). SysUpTime is defined as the time (in hundredths of a second) since the network management portion of the system was last re-initialized. Usually the time since boot.
         wfBisyncOutQLen 1.3.6.1.4.1.18.3.4.27.1.1.38 gauge read-only
The instantaneous current length of the output packet queue
         wfBisyncRxLackRescsChar 1.3.6.1.4.1.18.3.4.27.1.1.39 counter read-only
Number of Rx characters dropped due to lack of buffer resources
         wfBisyncIsrBCZero 1.3.6.1.4.1.18.3.4.27.1.1.40 counter read-only
Number of interrupts with byte count zero
         wfBisyncIsrBCSix 1.3.6.1.4.1.18.3.4.27.1.1.41 counter read-only
Number of interrupts with byte count six or more
         wfBisyncIsrBCInvalid 1.3.6.1.4.1.18.3.4.27.1.1.42 counter read-only
Number of interrupts with an unexpected message byte
         wfBisyncIsrBCErrors 1.3.6.1.4.1.18.3.4.27.1.1.43 counter read-only
Number of interrupt errors
         wfBisyncLocalConnectionState 1.3.6.1.4.1.18.3.4.27.1.1.44 integer read-only
The state of the cable at the router end. Enumeration: 'down': 2, 'unknown': 3, 'up': 1.
         wfBisyncRemoteConnectionState 1.3.6.1.4.1.18.3.4.27.1.1.45 integer read-only
The state of the cable at the controller end. Enumeration: 'down': 2, 'unknown': 4, 'up': 1, 'devicestreaming': 3.
         wfBisyncAdditionalSyncPairs 1.3.6.1.4.1.18.3.4.27.1.1.46 integer read-write
The number of pairs of sync characters, in addition to the first pair, to send between frames.