Wellfleet-BGP-MIB: View SNMP OID List / Download MIB

VENDOR: WELLFLEET


 Home MIB: Wellfleet-BGP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Wellfleet-COMMON-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wfBgpGeneralGroup 1.3.6.1.4.1.18.3.5.3.2.5.1
     wfBgp 1.3.6.1.4.1.18.3.5.3.2.5.1.1
         wfBgpDelete 1.3.6.1.4.1.18.3.5.3.2.5.1.1.1 integer read-write
Create/Delete parameter for determining whether or not BGP is configured on this router. Enumeration: 'deleted': 2, 'created': 1.
         wfBgpDisable 1.3.6.1.4.1.18.3.5.3.2.5.1.1.2 integer read-write
Enable/Disable parameter for determining whether or not to allow any versions of BGP to start up. Enumeration: 'disabled': 2, 'enabled': 1.
         wfBgpState 1.3.6.1.4.1.18.3.5.3.2.5.1.1.3 integer read-only
the administrative state of BGP Enumeration: 'down': 2, 'notpresent': 5, 'init': 3, 'up': 1, 'invalid': 4.
         wfBgpIdentifier 1.3.6.1.4.1.18.3.5.3.2.5.1.1.4 ipaddress read-write
The BGP Identifier for this router.
         wfBgpLocalAs 1.3.6.1.4.1.18.3.5.3.2.5.1.1.5 integer read-write
The Autonomous System (AS) that this router belongs to.
         wfBgpEbgpDebugSwitch 1.3.6.1.4.1.18.3.5.3.2.5.1.1.6 integer read-write
If this debug switch is enabled, BGP will not enforce the rule that requires each EBGP peer to be on a directly attached network. Enumeration: 'disabled': 2, 'enabled': 1.
         wfBgpVersion 1.3.6.1.4.1.18.3.5.3.2.5.1.1.7 octet string read-only
Vector of supported BGP protocol version numbers. Each peer negotiates the version from this vector. Versions are identified via the string of bits contained within this attribute. The first octet contains bits 0 to 7, the second octet contains bits 8 to 15, and so on, with the most significant bit referring to the lowest bit number in the octet (e.g., the MSB of the first octet refers to bit 0). If a bit, i, is present and set, then the version (i+1) of the BGP is supported.
         wfBgpIntraAsIbgpRouting 1.3.6.1.4.1.18.3.5.3.2.5.1.1.8 integer read-write
If this switch is enabled, BGP will perform Intra-AS IBGP routing. Enumeration: 'disabled': 2, 'enabled': 1.
         wfIbgpFromProtocols 1.3.6.1.4.1.18.3.5.3.2.5.1.1.9 integer read-write
if Intra-AS IBGP routing is enabled, this attribute spcifies if non-BGP external routes can be propogated via IBGP. Enumeration: 'bgp': 1, 'all': 2.
         wfBgpIntAdvTimer 1.3.6.1.4.1.18.3.5.3.2.5.1.1.10 integer read-write
the minimum time interval, in seconds, between injections of EBGP routes into the IP routing table. default is 5. Can't be zero
         wfBgpUsedRoutes 1.3.6.1.4.1.18.3.5.3.2.5.1.1.11 counter read-only
the number of received BGP routes that have been submitted for possible inclusion in the IP routing table.
         wfBgpTotalRoutes 1.3.6.1.4.1.18.3.5.3.2.5.1.1.12 counter read-only
the total number of BGP routes currently maintained.
         wfBgpTotalPaths 1.3.6.1.4.1.18.3.5.3.2.5.1.1.13 counter read-only
the total number of BGP path attributes blocks currently maintained.
         wfBgpMaxRedundantIbgpRoutes 1.3.6.1.4.1.18.3.5.3.2.5.1.1.14 integer read-write
Specifies the maximum number of IBGP routes to the same destination to be stored. At this point at least one route is stored even if zero is specified. If set to BGP_MAX_REDUNDANT_RTS_MAXIMUM, no limit will be imposed.
         wfBgpRouteRequestSwitch 1.3.6.1.4.1.18.3.5.3.2.5.1.1.15 integer read-write
If this switch is enabled and at least one connection to IBGP route server is enabled, alternate routes to a destination which became unreachable will be requested from the Route Server. Enumeration: 'disabled': 2, 'enabled': 1.
         wfBgpConnCollisionDetect 1.3.6.1.4.1.18.3.5.3.2.5.1.1.16 integer read-write
If this switch is enabled, redundant BGP connections to the same router will be detected and disallowed, i.e. only one BGP connection to the same router will be maintained. Enumeration: 'disabled': 2, 'enabled': 1.
         wfBgpRsTopology 1.3.6.1.4.1.18.3.5.3.2.5.1.1.17 integer read-write
Specifies IBGP Route Server connection topology: none(Non-RS), RC, full-mesh, or tree. To enable Route Server mode full-mesh or tree topology must be selected. Enumeration: 'none': 1, 'client': 2, 'tree': 4, 'mesh': 3.
         wfBgpClusterIdentifier 1.3.6.1.4.1.18.3.5.3.2.5.1.1.18 gauge read-write
If RS Server, cluster Identifer for this server
         wfBgpDynamicPolChangeSupport 1.3.6.1.4.1.18.3.5.3.2.5.1.1.19 integer read-write
If this switch is enabled, when a BGP policy rule changes all affected routes are dynamically re-evaluated according to the new policy specification. If this switch is disabled, all bgp connections are restarted. Enumeration: 'disabled': 2, 'enabled': 1.
         wfBgpSoloistSlots 1.3.6.1.4.1.18.3.5.3.2.5.1.1.20 gauge read-write
Slot mask for which slots BGP is eligible to run on. The MSBit represents slot 1, the next most significant bit represents slot 2, and so on... Slots can be 1-14. Default is all slots on a BCN.
         wfBgpSoloistSlot 1.3.6.1.4.1.18.3.5.3.2.5.1.1.21 integer read-only
Slot on which BGP runs in Soloist mode. Slots can be 1-14. Zero means that BGP is not in a Soloist mode. Default is zero.
         wfBgpSubnetAggregation 1.3.6.1.4.1.18.3.5.3.2.5.1.1.22 integer read-write
If this switch is enabled, non-BGP originated subnet routes are aggregated to their corresponding natural network routes for advertisement to bgp peers. Advertisement of BGP originated routes is not affected by this switch. Enumeration: 'disabled': 2, 'enabled': 1.
         wfBgpBlackHoleSupport 1.3.6.1.4.1.18.3.5.3.2.5.1.1.23 integer read-write
If this switch is disabled BGP doesn't submit a 'black-hole' route into IP routing table for an aggregate route advertised to a BGP peer. For action 'drop' packet will be dropped and for 'reject' - 'ICMP Destination Unreachable' will be send back. Enumeration: 'disabled': 1, 'drop': 2, 'reject': 3.
         wfBgpMedComparison 1.3.6.1.4.1.18.3.5.3.2.5.1.1.24 integer read-write
If this switch is disabled BGP, the Multi-Exit Discriminator (MED) route attribute is not considered in the route selection process. Enumeration: 'disabled': 2, 'enabled': 1.
         wfBgpIbgpReflection 1.3.6.1.4.1.18.3.5.3.2.5.1.1.25 integer read-write
Enables/Disables reflecting of BGP routes to IBGP peers. Enumeration: 'disabled': 2, 'enabled': 1.
         wfBgpIbgpEcmpMethod 1.3.6.1.4.1.18.3.5.3.2.5.1.1.26 integer read-write
Method to use IGP ECMP routing information for an IBGP peering. route-balance method distributes a set of destination networks that share the same IBGP Next Hop among available ECMP routes. Each IBGP network has one route submitted to IP RTM. traffic-balance uses all avaiable IGP ECMP routes. Each IBGP network submitted to IP RTM number of times equal to number IGP ECMP routes to IBGP Next Hop. Enumeration: 'disabled': 1, 'route-balance': 2, 'traffic-balance': 3.
         wfBgpLocalPrefCalc 1.3.6.1.4.1.18.3.5.3.2.5.1.1.27 integer read-write
Enable/disable local_pref calculation Enumeration: 'disabled': 2, 'enabled': 1.
         wfBgpConfedIdentifier 1.3.6.1.4.1.18.3.5.3.2.5.1.1.28 integer read-write
The BGP Confederation Identifier for this router. NIL means this AS is not a member of any confederation
         wfBgpConfedPeers 1.3.6.1.4.1.18.3.5.3.2.5.1.1.29 octet string read-write
Peer list of this BGP speaker to other member sub_ASs within the same confederation, NIL means no peer from this speaker to neighbor ASs that are members of this local confederation
         wfBgpIgpInterAction 1.3.6.1.4.1.18.3.5.3.2.5.1.1.30 integer read-write
Bit map for BGP/IGP interaction control: bit 15 bit 0 +---------------------------------------+ | | +---------------------------------------+ bit0: eBGP to OSPF bit1: eBGP to RIP bit2 - bit15: Reserved value 0 means no interaction
     wfBgpPeerTable 1.3.6.1.4.1.18.3.5.3.2.5.1.2 no-access
The BGP Peer table contains configuration and statistical information regarding this router's BGP peers
         wfBgpPeerEntry 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1 no-access
An entry in the BGP-Peer table
             wfBgpPeerDelete 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.1 integer read-write
Create/Delete: if set to delete, the peer connection is removed Enumeration: 'deleted': 2, 'created': 1.
             wfBgpPeerDisable 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.2 integer read-write
Enable/Disable: controls whether the peer connection is enabled or disabled Enumeration: 'disabled': 2, 'enabled': 1.
             wfBgpPeerState 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.3 integer read-only
the administrative state of the peer connection on this interface Enumeration: 'down': 2, 'notpresent': 5, 'init': 3, 'up': 1, 'invalid': 4.
             wfBgpPeerLocalAddr 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.4 ipaddress read-only
the local interface address
             wfBgpPeerLocalPort 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.5 integer read-only
the local TCP port number
             wfBgpPeerRemoteAddr 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.6 ipaddress read-only
the peer's interface address
             wfBgpPeerRemotePort 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.7 integer read-only
the peer's TCP port number
             wfBgpPeerMinVersion 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.8 integer read-write
the minimum BGP version number supported on this connection. Default is 4. Enumeration: 'bgp4': 4, 'bgp3': 3.
             wfBgpPeerMaxVersion 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.9 integer read-write
the maximum BGP version number supported on this connection Default is 4. Enumeration: 'bgp4': 4, 'bgp3': 3.
             wfBgpPeerRemoteAs 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.10 integer read-write
the configured peer's AS number. this must be filled in. the AS received in the open message must match this one.
             wfBgpPeerExtAdvTimer 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.11 integer read-write
Time interval in seconds for the MinRouteAdvertisementInterval BGP timer. Default is 30. Can't be zero
             wfBgpPeerConnectRetry 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.12 integer read-write
the ConnectRetry timer, in seconds. this is the time between TCP connection attempts.
             wfBgpPeerCfgHoldtime 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.13 integer read-write
the configured Holdtime timer, in seconds. this is the maximum time that the peer can wait without receiving a KEEPALIVE from this speaker. if no hold timer is to be used (for an SVC), zero should be entered. otherwise, the value must be 3 or greater. this value is sent in the OPEN message. upon receipt of an OPEN, the received hold time is compared to this value. if both are zero, no hold timer will be run and periodic keepalives will not be sent. otherwise, the minimum of the two timers will be used. if this results in a hold timer of less than 3, 3 will be used.
             wfBgpPeerHoldtime 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.14 integer read-only
the Holdtime timer value that was negotiated and is in use
             wfBgpPeerCfgKeepAlive 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.15 integer read-write
the configured KeepAlive timer, in seconds. this is the interval between sending KEEPALIVE messages. if the hold timer was set to zero, this is ignored. otherwise, the KeepAlive timer will be set to the minimum of this value and 1/3 of the hold timer.
             wfBgpPeerKeepAlive 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.16 integer read-only
the value used for the KeepAlive timer
             wfBgpPeerPathAttrSwitch 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.17 integer read-write
controls whether the wfBgp3PathAttrTable (and the bgpRcvdPathAttrTable) will be maintained. Enumeration: 'disabled': 2, 'enabled': 1.
             wfBgpPeerIdentifier 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.18 ipaddress read-only
the BGP ID of the Peer
             wfBgpPeerConnState 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.19 integer read-only
the state of the BGP connection FSM Enumeration: 'established': 6, 'openconfirm': 5, 'opensent': 4, 'idle': 1, 'connect': 2, 'active': 3.
             wfBgpPeerNegotiatedVersion 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.20 integer read-only
the negotiated version of BGP running between the two peers
             wfBgpPeerInUpdates 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.21 counter read-only
the number of BGP UPDATE messages received on this connection. This object should be initialized to zero when the connection is established.
             wfBgpPeerOutUpdates 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.22 counter read-only
the number of BGP UPDATE messages transmitted on this connection. This object should be initialized to zero when the connection is established.
             wfBgpPeerInTotalMessages 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.23 counter read-only
the total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established.
             wfBgpPeerOutTotalMessages 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.24 counter read-only
the total number of messages transmitted from the remote peer on this connection. This object should be initialized to zero when the connection is established.
             wfBgpPeerLastError 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.25 octet string read-only
the last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code; the second contains the subcode.
             wfBgpPeerTotalRoutes 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.26 counter read-only
the total number of routes that were received from this peer that we are currently maintaining.
             wfBgpPeerFsmEstablishedTransitions 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.27 counter read-only
The total number of times the BGP FSM transitioned into the established state.
             wfBgpPeerFsmEstablishedTime 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.28 gauge read-only
This timer indicates how long (in seconds) this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is configured or the router is booted.
             wfBgpPeerInUpdateElapsedTime 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.29 gauge read-only
Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time wfBgpPeerInUpdates is incremented, the value of this object is set to zero (0).
             wfBgpPeerMinASOriginationInterval 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.30 integer read-write
Time interval in seconds for the MinASOriginationInterval timer. The default value for this timer is 15 seconds. Can't be zero.
             wfBgpPeerLocalAS 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.31 integer read-write
If configured, specifies the AS Number that is sent in OPEN message to this peer. If zero, the AS Number specified with wfBgpLocalAS attribute is used.
             wfBgpPeerMaxUpdateSize 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.32 integer read-write
Specifies the maximum size (in bytes) of UPDATE message that can be sent to this peer. Note that, if the message size that is needed to advertise a single route is greater than the configured maximum message size, the acctual message size can exceed the configured value.
             wfBgpPeerRouteEchoSwitch 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.33 integer read-write
The switch controls route echoing. If enabled, a BGP route that is selected for forwarding is advertised back to the peer from which the route was received. Enumeration: 'disabled': 2, 'enabled': 1.
             wfBgpPeerDiscardDuplicateRouteSwitch 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.34 integer read-write
Indicates if duplicate routes with the identical path attributes should be discarded. Should be enabled only when peering with an IBGP Route Server. Enumeration: 'disabled': 2, 'enabled': 1.
             wfBgpPeerRSMode 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.35 integer read-write
Indicates the Route Reflector / Route Server Mode of BGP peer: (1) - not a Route Server or Route Reflector connection; (2) - peer is a Route Server client; (3) - peer is a Route Server in the same RS cluster; (4) - peer is a Route Server in a different RS cluster; (5) - peer is a Route Reflector client; (6) - peer is a Route Reflector in the same RR cluster; (7) - peer is a Route Reflector in a different RR cluster. Enumeration: 'none': 1, 'server-client': 2, 'reflector-internal': 6, 'reflector-client': 5, 'server-internal': 3, 'server-external': 4, 'reflector-external': 7.
             wfBgpPeerRSIdentifier 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.36 integer read-write
if wfBgpPeerRSMode is BGP_PEER_RS_MODE_INTERNAL or BGP_PEER_RS_MODE_RS_EXTERNAL, specifies the RS Identifier that is send in IDENTIFICATION message.
             wfBgpPeerCfgDelayGranularity 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.37 integer read-write
the configured delay granularity in seconds.
             wfBgpPeerDelayGranularity 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.38 integer read-only
the delay granularity in use
             wfBgpPeerLastErrorSrc 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.39 integer read-only
The source of the last error notification received/sent \ ( 1 = recv / 2 = sent ). A null is present if no errors \ have occured.
             wfBgpPeerNexthopSelf 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.40 integer read-write
Disable the use of third party advertisements Enumeration: 'disabled': 2, 'enabled': 1.
             wfBgpPeerASLoopDetect 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.41 integer read-write
Designates whether the router will kill a peering \ session if a Loop is detected in the AS Path. Enumeration: 'disabled': 2, 'enabled': 1.
             wfBgpPeerBgpEcmpMethod 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.42 integer read-write
Defines a method to use IGP ECMP routing information. route-balance method distributes a set of destination networks that share the same BGP Next Hop among available ECMP routes. Each BGP network has one route submitted to IP RTM. traffic-balance uses all avaiable IGP ECMP routes. Each BGP network submitted to IP RTM number of times equal to number IGP ECMP routes to BGP Next Hop. This parameter is similar to wfBgpIbgpEcmpMethod but is applicable only to EBGP peer connections. IBGP peer connection selects ECMP method according to wfBgpIbgpEcmpMethod value. Enumeration: 'disabled': 1, 'route-balance': 2, 'traffic-balance': 3.
             wfBgpPeerDampenedRoutes 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.43 integer read-only
Number of routes from this peer that are suppressed due to flap dampening.
             wfBgpPeerTTL 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.44 integer read-write
Configurable Time-To-Live field to be used for this peer connection. Unless wfBgpEbgpDebugSwitch is set, a TTL of 1 is used for external BGP connections. A value of zero (default) indicate to use wfIpBaseDefaultTTL as the TTL value for this peer connection.
             wfBgpPeerTcpAuthentication 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.45 integer read-write
Indicates if BGP TCP Authentication is enabled\ none(1) - no authentication\ md5(2) - MD5 authentication enabled Enumeration: 'none': 1, 'md5': 2.
             wfBgpPeerTcpMd5KeyStorage 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.46 integer read-write
Indicates how the wfBgpPeerTcpMd5Key is stored \ in the MIB and configuration file. \ clear-text(1) - the key is stored unencrypted \ encrypted(2) - the key is stored encrypted Enumeration: 'encrypted': 2, 'clear-text': 1.
             wfBgpPeerTcpMd5Key 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.47 octet string read-write
if nil, no key configured\ if not nil, BGP TCP MD5 authentication key stored in \ wfBgpPeerTcpMd5KeyStorage format
     wfBgpAsWeightTable 1.3.6.1.4.1.18.3.5.3.2.5.1.3 no-access
The BGP AS weight table contains weights for autonomous systems for use in best-route calculations
         wfBgpAsWeightEntry 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1 no-access
An entry in the BGP AS weight table
             wfBgpAsWeightDelete 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.1 integer read-write
Create/Delete: if set to delete, the AS entry is removed from this table Enumeration: 'deleted': 2, 'created': 1.
             wfBgpAsWeightDisable 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.2 integer read-write
Enable/Disable: controls whether the AS entry is enabled or disabled Enumeration: 'disabled': 2, 'enabled': 1.
             wfBgpAsWeightState 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.3 integer read-only
the state of this AS weight entry Enumeration: 'down': 2, 'notpresent': 5, 'init': 3, 'up': 1, 'invalid': 4.
             wfBgpAsWeightNumber 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.4 integer read-only
the AS number
             wfBgpAsWeightValue 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.5 integer read-write
the class-1 value to assign to this AS
             wfBgpAsWeightValue2 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.6 integer read-write
the class-2 value to assign to this AS Enumeration: 'default2': 8.
             wfBgpAsWeightValue3 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.7 integer read-write
the class-3 value to assign to this AS Enumeration: 'default3': 8.
             wfBgpAsWeightValue4 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.8 integer read-write
the class-4 value to assign to this AS Enumeration: 'default4': 8.
             wfBgpAsWeightValue5 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.9 integer read-write
the class-5 value to assign to this AS Enumeration: 'default5': 8.
             wfBgpAsWeightValue6 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.10 integer read-write
the class-6 value to assign to this AS Enumeration: 'default6': 8.
             wfBgpAsWeightValue7 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.11 integer read-write
the class-7 value to assign to this AS Enumeration: 'default7': 8.
             wfBgpAsWeightValue8 1.3.6.1.4.1.18.3.5.3.2.5.1.3.1.12 integer read-write
the class-8 value to assign to this AS Enumeration: 'default8': 8.
     wfBgpPathAttrTable 1.3.6.1.4.1.18.3.5.3.2.5.1.4 no-access
The BGP received path attribute table contains information about paths to destination networks received by all peers.
         wfBgpPathAttrEntry 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1 no-access
An entry in the BGP Path Attribute Table
             wfBgpPathAttrIpAddrPrefix 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.1 ipaddress read-only
the IP address of the destination (sub)network.
             wfBgpPathAttrIpAddrPrefixLen 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.2 integer read-only
Length in bits of the IP address prefix in the destination (sub)network address.
             wfBgpPathAttrPeer 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.3 ipaddress read-only
the IP address of the peer where the path information was learned.
             wfBgpPathAttrOrigin 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.4 integer read-only
the ultimate origin of the path information: igp (1) -- network is interior; egp (2) -- network learned via EGP; incomplete (3) -- undetermined. Enumeration: 'egp': 2, 'incomplete': 3, 'igp': 1.
             wfBgpPathAttrASPathSegment 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.5 octet string read-only
The sequence of AS path segments. Each AS path segment is represented by a triple . The type is a 1-octet field which has two possible values: 1 AS_SET: unordered set of ASs a route in the UPDATE message has traversed 2 AS_SEQUENCE: ordered set of ASs a route in the UPDATE message has traversed. The length is a 1-octet field containing the number of ASs in the value field. The value field contains one or more AS numbers, each AS is represented in the octet string as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255;
             wfBgpPathAttrNextHop 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.6 ipaddress read-only
the address of the border router that should be used as the next-hop for the destination network.
             wfBgpPathAttrMultiExitDisc 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.7 integer read-only
The optional inter-AS metric. If this attribute has not been provided for this route, the value for this object is -1.
             wfBgpPathAttrLocalPref 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.8 integer read-only
the originating BGP speaker's degree of preference for advertised route (-1..2147483647); if this attribute has not been provided for this route, the value for this object is -1.
             wfBgpPathAttrAtomicAggregate 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.9 integer read-only
indicates whether or not the local system has selected a less specific route without selecting a more specific route Enumeration: 'true': 2, 'false': 1.
             wfBgpPathAttrAggregatorAS 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.10 integer read-only
The AS number of the last BGP speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute.
             wfBgpPathAttrAggregatorAddr 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.11 ipaddress read-only
The BGP ID of the last BGP speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.
             wfBgpPathAttrCalcLocalPref 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.12 integer read-only
The degree of preference calculated by the receiving BGP speaker for an advertised route (-1..2147483647). A value of -1 indicates the absence of this attribute
             wfBgpPathAttrBest 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.13 integer read-only
an indication of whether or not this was chosen as the best bgp rout to the destination and whether or not it was chosen as a forwarding IP route Enumeration: 'true': 2, 'used': 4, 'false': 1, 'bestused': 3.
             wfBgpPathAttrUnknown 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.14 octet string read-only
One or more path attributes not understood by this BGP speaker. Size zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size (255), if any, are not recorded by this object.
             wfBgpPathAttrImporterID 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.15 ipaddress read-only
For RS, the BGP ID of the border router that imported this route
             wfBgpPathAttrClusterID 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.16 octet string read-only
For RS, the sequence of Cluter IDs of the Clusters. Size zero (0) indicates the absence of such attribute(s).
             wfBgpPathAttrCommunity 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.17 octet string read-only
List of BGP communities. Each community is 4 bytes long. Size zero (0) indicates the absence of community attribute. Octets beyond the maximum size (255), if any, are not recorded by this object.
             wfBgpPathAttrCalcMED 1.3.6.1.4.1.18.3.5.3.2.5.1.4.1.18 integer read-only
The Multi Exit Disc. calculated by the receiving BGP speaker for an advertised route (-1...2G)
     wfBgpDbgTable 1.3.6.1.4.1.18.3.5.3.2.5.1.5 no-access
BGP debug table contains objects that controls generation of BGP debug information
         wfBgpDbgEntry 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1 no-access
a table entry
             wfBgpDbgCreate 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1.1 integer read-write
Create/Delete parameter. Default is created. Enumeration: 'create': 1, 'delete': 2.
             wfBgpDbgLocAddr 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1.2 ipaddress read-only
The peer's local address. If 0.0.0.0, debug attributes are applied to all peers to specified Remote Address or with specified BGP version
             wfBgpDbgRemoteAddr 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1.3 ipaddress read-write
The peer's Remote Address . If 0.0.0.0, debug attrubutes are applied to all configured peers from specified Local Address; if 255.255.255.255, debug attrubutes are applied to BGP4 gate only.
             wfBgpDbgMsgLevel 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1.4 integer read-write
BGP log messages level. To control certain level of log messages BGP_DBG_MSG_ALL 0x001f0000 - 2031616 BGP_DBG_MSG_DEBUG 0x00010000 - 65536 BGP_DBG_MSG_INFO 0x00020000 - 131072 BGP_DBG_MSG_WARNING 0x00040000 - 262144 BGP_DBG_MSG_FAULT 0x00080000 - 524288 BGP_DBG_MSG_TRACE 0x00100000 - 1048576 Enumeration: 'info': 131072, 'all': 2031616, 'trace': 1048576, 'fault': 524288, 'warning': 262144, 'debug': 65536.
             wfBgpDbgMsgTraceSwitch 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1.5 integer read-write
controls whether BGP messages that are exchanged on this connection are dumped to the log. BGP_DBG_MSG_DUMP_REC_OPEN enables tracing of OPEN messages BGP_DBG_MSG_DUMP_REC_UPDATE - UPDATE messages BGP_DBG_MSG_DUMP_REC_NOTIFICATION - NOTIFICATION and BGP_DBG_MSG_DUMP_REC_KEEPALIVE - KEEPALIVE on logical OR basis BGP_DBG_MSG_DUMP_DISABLED 1 BGP_DBG_MSG_DUMP_REC_OPEN 0x10 - 16 BGP_DBG_MSG_DUMP_REC_UPDATE 0x20 - 32 BGP_DBG_MSG_DUMP_REC_NOTIFICATION 0x40 - 64 BGP_DBG_MSG_DUMP_REC_KEEPALIVE 0x80 - 128 Enumeration: 'disabled': 1, 'notification': 64, 'open': 16, 'update': 32, 'keepalive': 128.
             wfBgpDbgLogCode 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1.6 integer read-write
Indicates that a debug log message which corresponds to the value of this attributes should be or should be not sent to the log. Affects wfBgpDbgCodes only. In order to save combined list of messages you have to set wfBgpDbgBootCodes directly as copy of wfBgpDbgCodes
             wfBgpDbgLogCodeDisable 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1.7 integer read-write
Indicates that a debug log message defined in wfBgpDbgCode will be or will be not logged Enumeration: 'disabled': 2, 'enabled': 1.
             wfBgpDbgCodes 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1.8 octet string read-only
Vector of enabled debug messages (to check only). Messages are identified via the string of bits contained within this attribute. The first octet contains bits 0 to 7, the second octet contains bits 8 to 15, and so on, with the most significant bit referring to the lowest bit number in the octet (e.g., the MSB of the first octet refers to bit 0). If a bit, i, is present and set, then the DEBUG log message with the code (i) is enabled.
             wfBgpDbgBootCodes 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1.9 octet string read-write
User-defined vector of enabled debug messages at boot moment. Coded as instance above
     wfBgpVirtualPeerTable 1.3.6.1.4.1.18.3.5.3.2.5.1.6 no-access
The BGP Virtual Peer table contains configuration and statistical information regarding this router's Virtual peers learned via the Route Server
         wfBgpVirtualPeerEntry 1.3.6.1.4.1.18.3.5.3.2.5.1.6.1 no-access
An entry in the BGP-Virtual-Peer table
             wfBgpVirtualPeerLocalAddr 1.3.6.1.4.1.18.3.5.3.2.5.1.6.1.1 ipaddress read-only
the local interface address
             wfBgpVirtualPeerRemoteAddr 1.3.6.1.4.1.18.3.5.3.2.5.1.6.1.2 ipaddress read-only
the peer's interface address
             wfBgpVirtualPeerIdentifier 1.3.6.1.4.1.18.3.5.3.2.5.1.6.1.3 ipaddress read-only
the BGP ID of the Peer
             wfBgpVirtualPeerInUpdates 1.3.6.1.4.1.18.3.5.3.2.5.1.6.1.4 counter read-only
the number of BGP UPDATE messages received on this connection. This object should be initialized to zero when the connection is established.
             wfBgpVirtualPeerTotalRoutes 1.3.6.1.4.1.18.3.5.3.2.5.1.6.1.5 counter read-only
the total number of routes that were received from this peer that we are currently maintaining.
             wfBgpVirtualPeerInUpdateElapsedTime 1.3.6.1.4.1.18.3.5.3.2.5.1.6.1.6 gauge read-only
Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time wfBgpVirtualPeerInUpdates is incremented, the value of this object is set to zero (0).
     wfBgpPathAttributeTable 1.3.6.1.4.1.18.3.5.3.2.5.1.7 no-access
The BGP received path attribute table contains information about paths to destination networks received by all peers.
         wfBgpPathAttributeEntry 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1 no-access
An entry in the BGP Path Attribute Table
             wfBgpPathAttributeIpAddrPrefix 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.1 ipaddress read-only
the IP address of the destination (sub)network.
             wfBgpPathAttributeIpAddrPrefixLen 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.2 integer read-only
Length in bits of the IP address prefix in the destination (sub)network address.
             wfBgpPathAttributeImporterID 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.3 ipaddress read-only
For RS, the BGP ID of the border router that imported this route
             wfBgpPathAttributePeer 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.4 ipaddress read-only
the IP address of the peer where the path information was learned.
             wfBgpPathAttributeOrigin 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.5 integer read-only
the ultimate origin of the path information: igp (1) -- network is interior; egp (2) -- network learned via EGP; incomplete (3) -- undetermined. Enumeration: 'egp': 2, 'incomplete': 3, 'igp': 1.
             wfBgpPathAttributeASPathSegment 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.6 octet string read-only
The sequence of AS path segments. Each AS path segment is represented by a triple . The type is a 1-octet field which has two possible values: 1 AS_SET: unordered set of ASs a route in the UPDATE message has traversed 2 AS_SEQUENCE: ordered set of ASs a route in the UPDATE message has traversed. The length is a 1-octet field containing the number of ASs in the value field. The value field contains one or more AS numbers, each AS is represented in the octet string as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255;
             wfBgpPathAttributeNextHop 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.7 ipaddress read-only
the address of the border router that should be used as the next-hop for the destination network.
             wfBgpPathAttributeMultiExitDisc 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.8 integer read-only
The optional inter-AS metric. If this attribute has not been provided for this route, the value for this object is -1.
             wfBgpPathAttributeLocalPref 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.9 integer read-only
the originating BGP speaker's degree of preference for advertised route (-1..2147483647); if this attribute has not been provided for this route, the value for this object is -1.
             wfBgpPathAttributeAtomicAggregate 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.10 integer read-only
indicates whether or not the local system has selected a less specific route without selecting a more specific route Enumeration: 'true': 2, 'false': 1.
             wfBgpPathAttributeAggregatorAS 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.11 integer read-only
The AS number of the last BGP speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute.
             wfBgpPathAttributeAggregatorAddr 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.12 ipaddress read-only
The BGP ID of the last BGP speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.
             wfBgpPathAttributeCalcLocalPref 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.13 integer read-only
The degree of preference calculated by the receiving BGP speaker for an advertised route (-1..2147483647). A value of -1 indicates the absence of this attribute
             wfBgpPathAttributeBest 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.14 integer read-only
an indication of whether or not this was chosen as the best bgp rout to the destination and whether or not it was chosen as a forwarding IP route Enumeration: 'true': 2, 'used': 4, 'false': 1, 'bestused': 3.
             wfBgpPathAttributeUnknown 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.15 octet string read-only
One or more path attributes not understood by this BGP speaker. Size zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size (255), if any, are not recorded by this object.
             wfBgpPathAttributeClusterID 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.16 octet string read-only
For RS, the sequence of Cluter IDs of the Clusters. Size zero (0) indicates the absence of such attribute(s).
             wfBgpPathAttributeCommunity 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.17 octet string read-only
List of BGP communities. Each community is 4 bytes long. Size zero (0) indicates the absence of community attribute. Octets beyond the maximum size (255), if any, are not recorded by this object.
             wfBgpPathAttributeCalcMED 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.18 integer read-only
The Multi Exit Disc. calculated by the receiving BGP speaker for an advertised route (-1...2G)
             wfBgpPathAttributeFlapPenalty 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.19 integer read-only
Penalty value based on number of route flaps
             wfBgpPathAttributeFlapCount 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.20 integer read-only
Number of times a route flapped since the last time the penaltywas reset to zero
             wfBgpPathAttributeRouteDampened 1.3.6.1.4.1.18.3.5.3.2.5.1.7.1.21 integer read-only
Shows whether this route is currently suppressed from being announced Enumeration: 'suppressed': 2, 'announced': 1.
     wfBgpRouteFlapDampeningTable 1.3.6.1.4.1.18.3.5.3.2.5.1.8 no-access
Table of wfBgpRouteFlapDampeningEntry
         wfBgpRouteFlapDampeningEntry 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1 no-access
An entry in the Route Flap Dampening table
             wfBgpRouteFlapDampeningDelete 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1.1 integer read-write
Create/Delete: if set to delete, the entry is removed Enumeration: 'deleted': 2, 'created': 1.
             wfBgpRouteFlapDampeningIndex 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1.2 integer read-only
Index number of this entry in wfBgpRouteFlapDampeningTable
             wfBgpRouteFlapDampeningName 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1.3 displaystring read-write
Name of this template
             wfBgpRouteFlapDampeningCutoffThreshold 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1.4 integer read-write
Value of penalty over which a route is suppressed. Expressed in number of withdrawals
             wfBgpRouteFlapDampeningReuseThreshold 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1.5 integer read-write
Value of penalty below which a route is unsuppressed. Expressed in number of withdrawals
             wfBgpRouteFlapDampeningReachableDecay 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1.6 integer read-write
Duration in minutes after which the penalty value is reduced to half when the route is reachable. Default is 5 minutes
             wfBgpRouteFlapDampeningUnreachableDecay 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1.7 integer read-write
Duration in minutes after which the penalty value is reduced to half when the route is unreachable. Default is 15 minutes.
             wfBgpRouteFlapDampeningMaxHoldDown 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1.8 integer read-write
Maximum time a route remains suppressed. Expressed in number seconds. Default is 45 minutes
             wfBgpRouteFlapDampeningMemoryLimit 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1.9 integer read-write
If the state of a route(reachable/unreachable) remains stable for this duration, the penalty is cleared and the route unsuppressed. Expressed in number of minutes. Default is 45 minutes
 wfBgp3Group 1.3.6.1.4.1.18.3.5.3.2.5.2
     wfBgp3 1.3.6.1.4.1.18.3.5.3.2.5.2.1
         wfBgp3Delete 1.3.6.1.4.1.18.3.5.3.2.5.2.1.1 integer read-write
Create/Delete parameter for determining whether or not BGP3 is configured on this router. Enumeration: 'deleted': 2, 'created': 1.
         wfBgp3Disable 1.3.6.1.4.1.18.3.5.3.2.5.2.1.2 integer read-write
Enable/Disable parameter for determining whether or not to start-up BGP3. Enumeration: 'disabled': 2, 'enabled': 1.
         wfBgp3State 1.3.6.1.4.1.18.3.5.3.2.5.2.1.3 integer read-only
the administrative state of BGP-3 Enumeration: 'down': 2, 'notpresent': 5, 'init': 3, 'up': 1, 'invalid': 4.
         wfBgp3IntraAsIbgpRouting 1.3.6.1.4.1.18.3.5.3.2.5.2.1.4 integer read-write
If this switch is enabled, BGP-3 will perform Intra-AS IBGP routing. Enumeration: 'disabled': 2, 'enabled': 1.
         wfBgp3IntAdvTimer 1.3.6.1.4.1.18.3.5.3.2.5.2.1.5 integer read-write
the minimum time interval, in seconds, between injections of EBGP routes into the IP routing table. default is 5. can't be zero
         wfBgp3RipRules 1.3.6.1.4.1.18.3.5.3.2.5.2.1.6 integer read-write
if enabled, IBGP routes that are also reachable via a RIP route will be consider 'reachable' and will be used. the use of this is highly discouraged. Enumeration: 'disabled': 2, 'enabled': 1.
         wfBgp3UsedRoutes 1.3.6.1.4.1.18.3.5.3.2.5.2.1.7 counter read-only
the number of received BGP-3 routes that have been submitted for possible inclusion in the IP routing table.
         wfBgp3TotalRoutes 1.3.6.1.4.1.18.3.5.3.2.5.2.1.8 counter read-only
the total number of BGP-3 routes currently maintained.
     wfBgp3PathAttrTable 1.3.6.1.4.1.18.3.5.3.2.5.2.2 no-access
The BGP3 received path attribute table contains information about paths to destination networks received by all peers. This table is deprecated and replaced with wfBgpPathAttrTable
         wfBgp3PathAttrEntry 1.3.6.1.4.1.18.3.5.3.2.5.2.2.1 no-access
An entry in the BGP-3 Path Attribute Table
             wfBgp3PathAttrPeer 1.3.6.1.4.1.18.3.5.3.2.5.2.2.1.1 ipaddress read-only
the BGP identifier of the peer where the path information was learned.
             wfBgp3PathAttrDestNetwork 1.3.6.1.4.1.18.3.5.3.2.5.2.2.1.2 ipaddress read-only
the address of the destination network.
             wfBgp3PathAttrOrigin 1.3.6.1.4.1.18.3.5.3.2.5.2.2.1.3 integer read-only
the ultimate origin of the path information: igp (1) -- network is interior; egp (2) -- network learned via EGP; incomplete (3) -- undetermined. Enumeration: 'egp': 2, 'incomplete': 3, 'igp': 1.
             wfBgp3PathAttrASPath 1.3.6.1.4.1.18.3.5.3.2.5.2.2.1.4 octet string read-only
the set of ASes that must be traversed to reach the network. Each AS is represented as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255;
             wfBgp3PathAttrNextHop 1.3.6.1.4.1.18.3.5.3.2.5.2.2.1.5 ipaddress read-only
the address of the border router that should be used as the next-hop for the destination network.
             wfBgp3PathAttrInterASMetric 1.3.6.1.4.1.18.3.5.3.2.5.2.2.1.6 integer read-only
the optional inter-AS metric. if this attribute has not been provided for this route, the value for this object is 0.
             wfBgp3PathAttrASPathWeight 1.3.6.1.4.1.18.3.5.3.2.5.2.2.1.7 integer read-only
the calculated AS path weight
             wfBgp3PathAttrBgpPreference 1.3.6.1.4.1.18.3.5.3.2.5.2.2.1.8 integer read-only
the preference that is used to calculate this route with other BGP routes to the same destination
             wfBgp3PathAttrBest 1.3.6.1.4.1.18.3.5.3.2.5.2.2.1.9 integer read-only
an indication of whether or not this was chosen as the best route to the destination Enumeration: 'true': 2, 'false': 1.
 wfBgp4Group 1.3.6.1.4.1.18.3.5.3.2.5.3
     wfBgp4 1.3.6.1.4.1.18.3.5.3.2.5.3.1
         wfBgp4Delete 1.3.6.1.4.1.18.3.5.3.2.5.3.1.1 integer read-write
Create/Delete parameter for determining whether or not BGP-4 is configured on this router. Enumeration: 'deleted': 2, 'created': 1.
         wfBgp4Disable 1.3.6.1.4.1.18.3.5.3.2.5.3.1.2 integer read-write
Enable/Disable parameter for determining whether or not to start-up BGP-4. Enumeration: 'disabled': 2, 'enabled': 1.
         wfBgp4State 1.3.6.1.4.1.18.3.5.3.2.5.3.1.3 integer read-only
the administrative state of BGP-4 Enumeration: 'down': 2, 'notpresent': 5, 'init': 3, 'up': 1, 'invalid': 4.