Wellfleet-ASYNC-MIB: View SNMP OID List / Download MIB

VENDOR: WELLFLEET


 Home MIB: Wellfleet-ASYNC-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Wellfleet-COMMON-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wfAsyncTable 1.3.6.1.4.1.18.3.4.3 no-access
ASYNC line record
     wfAsyncEntry 1.3.6.1.4.1.18.3.4.3.1 no-access
An entry in the ASYNC table
         wfAsyncDelete 1.3.6.1.4.1.18.3.4.3.1.1 integer read-write
Create/Delete parameter Enumeration: 'deleted': 2, 'created': 1.
         wfAsyncDisable 1.3.6.1.4.1.18.3.4.3.1.2 integer read-write
Enable/Disable parameter Enumeration: 'disabled': 2, 'enabled': 1.
         wfAsyncState 1.3.6.1.4.1.18.3.4.3.1.3 integer read-only
Line Driver state variable, Not Present, DSR Wait, Init, Down, Up Enumeration: 'down': 2, 'init': 3, 'up': 1, 'notpresent': 4, 'dsrwait': 5.
         wfAsyncSlot 1.3.6.1.4.1.18.3.4.3.1.4 integer read-only
Instance ID Slot, filled in by driver
         wfAsyncConnector 1.3.6.1.4.1.18.3.4.3.1.5 integer read-only
Instance ID Connector, filled in by driver. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot. Enumeration: 'four': 4, 'three': 3, 'two': 2, 'one': 1.
         wfAsyncCct 1.3.6.1.4.1.18.3.4.3.1.6 integer read-write
CCT number for this line instance
         wfAsyncMtu 1.3.6.1.4.1.18.3.4.3.1.7 integer read-write
MTU parameter, this is buffer size for ASYNC media, fixed
         wfAsyncMadr 1.3.6.1.4.1.18.3.4.3.1.8 octet string read-only
Line MAC address, fixed - line driver fills in from the 48 bit address stored in the serial number prom for this connector.
         wfAsyncStartProtocol 1.3.6.1.4.1.18.3.4.3.1.9 integer read-write
Start protocol selection is provided via this parameter. The supported protocols can be selected per interface. Enumeration: 'answer': 3, 'originate': 2, 'loop': 1.
         wfAsyncRxOctets 1.3.6.1.4.1.18.3.4.3.1.10 counter read-only
Number of octets received without error
         wfAsyncTxOctets 1.3.6.1.4.1.18.3.4.3.1.11 counter read-only
Number of octets transmitted without error
         wfAsyncRxErrors 1.3.6.1.4.1.18.3.4.3.1.12 counter read-only
Number of receive errors
         wfAsyncTxErrors 1.3.6.1.4.1.18.3.4.3.1.13 counter read-only
Number of transmission errors
         wfAsyncRxLackRescs 1.3.6.1.4.1.18.3.4.3.1.14 counter read-only
Number of Rx frames dropped due to lack of buffer resources
         wfAsyncTxLackRescs 1.3.6.1.4.1.18.3.4.3.1.15 counter read-only
Number of frames clipped in driver's transmit routine due to transmit congestion.
         wfAsyncTxUnderFlows 1.3.6.1.4.1.18.3.4.3.1.16 counter read-only
Number of transmission underflows, device FIFO went empty before next DMA request was granted.
         wfAsyncTxRejects 1.3.6.1.4.1.18.3.4.3.1.17 counter read-only
Number of reject frames which were transmitted
         wfAsyncRxRejects 1.3.6.1.4.1.18.3.4.3.1.18 counter read-only
Number of reject frames which were received
         wfAsyncRxOverFlows 1.3.6.1.4.1.18.3.4.3.1.19 counter read-only
Number of receive overflows, device FIFO overflowed before next DMA cycle granted. No buffer resources available.
         wfAsyncRxBadOctets 1.3.6.1.4.1.18.3.4.3.1.20 counter read-only
Number of bad receive frames, caused by FCS errors or non octet aligned.
         wfAsyncRxRunts 1.3.6.1.4.1.18.3.4.3.1.21 counter read-only
Number of runt frames received
         wfAsyncTxQueueLength 1.3.6.1.4.1.18.3.4.3.1.22 integer read-only
Current Transmit Queue Length.
         wfAsyncRxQueueLength 1.3.6.1.4.1.18.3.4.3.1.23 integer read-only
Current Receive Queue Length.
         wfAsyncRxReplenMisses 1.3.6.1.4.1.18.3.4.3.1.24 counter read-only
Number of packet buffer misses while attempting to replenish driver receive ring.
         wfAsyncLineNumber 1.3.6.1.4.1.18.3.4.3.1.25 integer read-write
line number for this line instance
         wfAsyncRemoteAddress 1.3.6.1.4.1.18.3.4.3.1.26 ipaddress read-write
Remote TCP host IP address
         wfAsyncRemotePort 1.3.6.1.4.1.18.3.4.3.1.27 integer read-write
Remote port for TCP connection Enumeration: 'port': 7.
         wfAsyncLocalPort 1.3.6.1.4.1.18.3.4.3.1.28 integer read-write
Local port for TCP connection Enumeration: 'default': 2100.
         wfAsyncBaud 1.3.6.1.4.1.18.3.4.3.1.29 integer read-write
Async line speed Enumeration: 'r19200': 19200, 'r300': 300, 'r4800': 4800, 'r9600': 9600, 'r1200': 1200, 'r2400': 2400.
         wfAsyncIdleTimer 1.3.6.1.4.1.18.3.4.3.1.30 integer read-write
Async line Idle timer
         wfAsyncRxWindow 1.3.6.1.4.1.18.3.4.3.1.31 integer read-write
Configured TCP receive window
         wfAsyncMinRxWindows 1.3.6.1.4.1.18.3.4.3.1.32 counter read-only
Low-water mark of receive window (for latest connection)
         wfASyncSecTxQmaxs 1.3.6.1.4.1.18.3.4.3.1.33 counter read-only
secondary TX queue hi-water mark (for this connection)
         wfASyncSecTxQlens 1.3.6.1.4.1.18.3.4.3.1.34 counter read-only
secondary TX queue present value
         wfAsyncTCPKeepalive 1.3.6.1.4.1.18.3.4.3.1.35 integer read-write
Keepalive timer. A keepalive (probe) message is sent out if there is no activity in this number of seconds.
         wfAsyncTCPInactivityLimit 1.3.6.1.4.1.18.3.4.3.1.36 integer read-write
Inactivity limit. Connection (eligable for) reset if no activity in this number of seconds.
         wfAsyncCfgTxQueueLength 1.3.6.1.4.1.18.3.4.3.1.37 integer read-write
Configured Transmit Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special meaning. Zero causes router based default values to be used. Values larger than the compiled ring size are truncated to the compiled ring size.
         wfAsyncCfgRxQueueLength 1.3.6.1.4.1.18.3.4.3.1.38 integer read-write
Configured Receive Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special meaning. Zero causes router based default values to be used. Values larger than the compiled ring size are truncated to the compiled ring size.