WaveLAN-MIB: View SNMP OID List / Download MIB

VENDOR: ATT (AMERICAN TELEPHONE AND TELEGRAPH)


 Home MIB: WaveLAN-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 att_2 1.3.6.1.4.1.74
       att_mgmt 1.3.6.1.4.1.74.2
           wavelan 1.3.6.1.4.1.74.2.21
                 wavelanInterface 1.3.6.1.4.1.74.2.21.1
                     wliNicTable 1.3.6.1.4.1.74.2.21.1.1 no-access
Network Interface Card information for a collection of WaveLAN interfaces attached to a particular system.
                         wliNicEntry 1.3.6.1.4.1.74.2.21.1.1.1 no-access
Network Interface Card information for a particular WaveLAN interface.
                             wliNicIndex 1.3.6.1.4.1.74.2.21.1.1.1.1 integer read-only
An index value that uniquely identifies a WaveLAN network interface this NIC information applies to. The interface associated with a particular value of this index is the same interface as identified by the same value of ifIndex.
                             wliNicBusType 1.3.6.1.4.1.74.2.21.1.1.1.2 integer read-only
The bus-type supported by this NIC. Enumeration: 'wavepointBus': 5, 'pcmcia2Bus': 4, 'xtBus': 1, 'mcBus': 3, 'isaBus': 2.
                             wliNicSlot 1.3.6.1.4.1.74.2.21.1.1.1.3 integer read-only
The I/O Base Address (ISA/AT) or Slot Number (MC) or Socket Number (PCMCIA) used by this NIC. For ISA/AT (and alike) Base Addresses, the following values are used: 1='0300'H, 2='0390'H, 3='03C0'H, 4='03E0'H
                             wliNicIrq 1.3.6.1.4.1.74.2.21.1.1.1.4 integer read-only
The Interrupt Request Number (IRQ) used by this NIC.
                             wliNicError 1.3.6.1.4.1.74.2.21.1.1.1.5 counter read-only
A counter for miscellaneous board errors. It indicates (intermittent) NIC hardware problems.
                             wliNicOutOfRxResource 1.3.6.1.4.1.74.2.21.1.1.1.6 counter read-only
A counter for the number of times the NIC is out of resources for the receiver, causing the receiver to be switched off temporarily.
                     wliPhyTable 1.3.6.1.4.1.74.2.21.1.2 no-access
PHY status information and control variables for a collection of WaveLAN interfaces attached to a particular system.
                         wliPhyEntry 1.3.6.1.4.1.74.2.21.1.2.1 no-access
PHY status information and control variables for a particular WaveLAN interface.
                             wliPhyIndex 1.3.6.1.4.1.74.2.21.1.2.1.1 integer read-only
An index value that uniquely identifies a WaveLAN network interface this PHY information applies to. The interface associated with a particular value of this index is the same interface as identified by the same value of ifIndex.
                             wliPhyDsp 1.3.6.1.4.1.74.2.21.1.2.1.2 integer read-only
The Digital Signal Processor on the board. Enumeration: 'daedalus': 2, 'icarus': 1.
                             wliPhyFrequency 1.3.6.1.4.1.74.2.21.1.2.1.3 integer read-only
The mid-point of the frequency band this WaveLAN NIC operates in. Enumeration: 'f2430Mhz': 5, 'f2442Mhz': 9, 'f2462Mhz': 11, 'f2460Mhz': 3, 'f2484Mhz': 4, 'f2412Mhz': 6, 'f2422Mhz': 7, 'f2452Mhz': 10, 'f915Mhz': 1, 'f2425Mhz': 2, 'f2432Mhz': 8.
                             wliPhyNwid 1.3.6.1.4.1.74.2.21.1.2.1.4 octet string read-write
The WaveLAN Network ID (NWID) this RF-modem is currently configured for.
                             wliPhyRfSilenceLevel 1.3.6.1.4.1.74.2.21.1.2.1.5 integer read-only
The RF Silence Level as currently read from the RF modem.
                             wliPhyOwnNwid 1.3.6.1.4.1.74.2.21.1.2.1.6 counter read-only
Own NWID counter; the number of frames received with the configured NWID.
                             wliPhyOtherNwid 1.3.6.1.4.1.74.2.21.1.2.1.7 counter read-only
Other NWID counter; the number of frames received with different NWID than configured.
                             wliPhyLowSnr 1.3.6.1.4.1.74.2.21.1.2.1.8 counter read-only
The number of times the Signal to Noise Ratio (sample) of a frame reception was low.
                             wliPhyGoodSnr 1.3.6.1.4.1.74.2.21.1.2.1.9 counter read-only
The number of times the Signal to Noise Ratio (sample) of a frame reception was good.
                             wliPhyExcellentSnr 1.3.6.1.4.1.74.2.21.1.2.1.10 counter read-only
The number of times the Signal to Noise Ratio (sample) of a frame reception was excellent.
                     wliMacTable 1.3.6.1.4.1.74.2.21.1.3 no-access
MAC status information and control variables for a collection of WaveLAN interfaces attached to a particular system.
                         wliMacEntry 1.3.6.1.4.1.74.2.21.1.3.1 no-access
MAC status information and control variables for a particular WaveLAN interface.
                             wliMacIndex 1.3.6.1.4.1.74.2.21.1.3.1.1 integer read-only
An index value that uniquely identifies a WaveLAN network interface this MAC information applies to. The interface associated with a particular value of this index is the same interface as identified by the same value of ifIndex.
                             wliMacAddressSelect 1.3.6.1.4.1.74.2.21.1.3.1.2 integer read-only
MAC Address type select. Enumeration: 'universal': 1, 'local': 2.
                             wliMacCaDefers 1.3.6.1.4.1.74.2.21.1.3.1.3 counter read-only
CSMA/CA Defer counter.
                             wliMacDeferredTransmissions 1.3.6.1.4.1.74.2.21.1.3.1.4 counter read-only
A counter for the number of frames for which the transmission attempt is delayed because the medium is busy. (same as dot3StatsDeferredTransmissions)
                             wliMacFCSErrors 1.3.6.1.4.1.74.2.21.1.3.1.5 counter read-only
A counter for the number of frames received that do not pass the FCS check and/or that are not an integral number of octets in length. WaveLAN hardware does not distinguish between FCS errors and Alignment errors. (same as dot3StatsFCSErrors + dot3StatsAlignmentErrors)
                             wliMacFrameTooLongs 1.3.6.1.4.1.74.2.21.1.3.1.6 counter read-only
A counter for the number of frames received that exceed the maximum permitted frame size for the medium (1518 bytes). (same as dot3StatsFrameTooLongs)
                             wliMacFrameTooShorts 1.3.6.1.4.1.74.2.21.1.3.1.7 counter read-only
A counter for the number of frames received that are shorter than the minimum permitted frame size for the medium (64 bytes)
                             wliMacDeferLimits 1.3.6.1.4.1.74.2.21.1.3.1.8 counter read-only
The number of times a frame is not transmitted because the CSMA/CA defer limit is reached
                     wliDriverTable 1.3.6.1.4.1.74.2.21.1.4 no-access
Driver information for a collection of WaveLAN interfaces attached to a particular system.
                         wliDriverEntry 1.3.6.1.4.1.74.2.21.1.4.1 no-access
Driver information for a particular WaveLAN interface.
                             wliDriverIndex 1.3.6.1.4.1.74.2.21.1.4.1.1 integer read-only
An index value that uniquely identifies a WaveLAN network interface this driver information applies to. The interface associated with a particular value of this index is the same interface as identified by the same value of ifIndex.
                             wliDriverName 1.3.6.1.4.1.74.2.21.1.4.1.2 displaystring read-only
The name of the software driver for this WaveLAN network interface.
                             wliDriverVersion 1.3.6.1.4.1.74.2.21.1.4.1.3 displaystring read-only
The version number of the software driver. A text string as 'mm.nn.pp', where mm = major release number nn = point release number pp = optional patch number
                     wliEncTable 1.3.6.1.4.1.74.2.21.1.5 no-access
Encryption status information and control variables for a collection of WaveLAN interfaces attached to a particular system.
                         wliEncEntry 1.3.6.1.4.1.74.2.21.1.5.1 no-access
Encryption status information and control variables for a particular WaveLAN interface.
                             wliEncIndex 1.3.6.1.4.1.74.2.21.1.5.1.1 integer read-only
An index value that uniquely identifies a WaveLAN network interface this encryption information applies to. The interface associated with a particular value of this index is the same interface as identified by the same value of ifIndex.
                             wliEncInstalled 1.3.6.1.4.1.74.2.21.1.5.1.2 integer read-only
Which encryption option is installed. Enumeration: 'none': 1, 'des': 2, 'aes': 3.
                             wliEncSelect 1.3.6.1.4.1.74.2.21.1.5.1.3 integer read-only
Whether encryption is enabled or disabled. Enumeration: 'disabled': 1, 'enabled': 2.
                             wliEncKey 1.3.6.1.4.1.74.2.21.1.5.1.4 octet string read-write
The encryption key.
                     wliMcastDelayTable 1.3.6.1.4.1.74.2.21.1.6 no-access
Information about the Multicast Delay feature for a collection of WaveLAN interfaces attached to a particular system.
                         wliMcastDelayEntry 1.3.6.1.4.1.74.2.21.1.6.1 no-access
Information about the Multicast Delay feature for a particular WaveLAN interface.
                             wliMcastDelayIndex 1.3.6.1.4.1.74.2.21.1.6.1.1 integer read-only
An index value that uniquely identifies a WaveLAN network interface this Multicast Delay information applies to. The interface associated with a particular value of this index is the same interface as identified by the same value of wliIndex (and ifIndex).
                             wliMcastNumberOfAps 1.3.6.1.4.1.74.2.21.1.6.1.2 integer read-write
The total number of Access Points in the coverage area. Together with wliMcastApSequenceNumber this is used to determine the delays before and after the transmission of each multicast frame. This results in a transmission slot per Access Point per multicast frame. 0 means: no multicast delay specified (use default mechanism).
                             wliMcastApSequenceNumber 1.3.6.1.4.1.74.2.21.1.6.1.3 integer read-write
The sequence number of this Access Point in the coverage area. Together with wliMcastNumberOfAps this is used to determine the delays before and after the transmission of each multicast frame. This results in a transmission slot per Access Point per multicast frame.
                             wliMcastRepeatCount 1.3.6.1.4.1.74.2.21.1.6.1.4 integer read-write
The number of times a multicast frame transmission is to be repeated.