WWP-SYSLOG-COLLECTOR-MIB: View SNMP OID List / Download MIB

VENDOR: WORLD WIDE PACKETS


 Home MIB: WWP-SYSLOG-COLLECTOR-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, WWP-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wwpSyslogCollectorMIB 1.3.6.1.4.1.6141.2.46
A MIB module to manage syslog collectors on the LEOS based WWP products.
       wwpSyslogCollMIBObjects 1.3.6.1.4.1.6141.2.46.1
           wwpSyslogSystem 1.3.6.1.4.1.6141.2.46.1.1
               wwpSyslogEnable 1.3.6.1.4.1.6141.2.46.1.1.1 truthvalue read-write
Specifies whether or not the syslog client is enabled. This is the system wide parameter and will overwrite any collector specific managed object to enable or disable the syslog client.
           wwpSyslogColl 1.3.6.1.4.1.6141.2.46.1.2
               wwpSyslogCollectorTable 1.3.6.1.4.1.6141.2.46.1.2.1 no-access
A table containing Syslog collector information.
                   wwpSyslogCollectorEntry 1.3.6.1.4.1.6141.2.46.1.2.1.1 no-access
Defines the information pertaining to a syslog collector to which a syslog messages will be relayed. Entries within this table with an access level of read- create MUST be considered non-volatile and MUST be maintained across entity resets.
                       wwpSyslogCollectorAddr 1.3.6.1.4.1.6141.2.46.1.2.1.1.1 ipaddress read-only
The Ip address for the Syslog message collector.
                       wwpSyslogCollectorUDPPort 1.3.6.1.4.1.6141.2.46.1.2.1.1.2 integer32 read-only
The port number on the destination to which the syslog message will be forwarded over the udp transport.
                       wwpSyslogCollectorFacility 1.3.6.1.4.1.6141.2.46.1.2.1.1.3 syslogfacility read-only
The syslog facility code that will added to messages forwarded to this collector.
                       wwpSyslogCollectorMinSeverity 1.3.6.1.4.1.6141.2.46.1.2.1.1.4 syslogseverity read-only
Any syslog message with a severity less than the severity specified by this object will be ignored by the collector. note: serverity level numeric values increase as their severity decreases, e.g. error(3) is more severe than debug(7).
                       wwpSyslogCollectorMaxSeverity 1.3.6.1.4.1.6141.2.46.1.2.1.1.5 syslogseverity read-only
Any syslog message with a severity greater than the severity specified by this object will be ignored by the collector. note: serverity level numeric values increase as their severity decreases, e.g. error(3) is more severe than debug(7).
                       wwpSyslogCollectorStatus 1.3.6.1.4.1.6141.2.46.1.2.1.1.6 rowstatus read-only
This object is used to create and delete rows in the wwpSyslogCollectorTable. To create a new row the management station must set the object to 'CreateAndGo'. The collector can be disabled by setting this object to 'notInService'.
       wwpSyslogCollMIBNotificationPrefix 1.3.6.1.4.1.6141.2.46.2
           wwpSyslogCollMIBNotifications 1.3.6.1.4.1.6141.2.46.2.0
       wwpSyslogCollMIBConformance 1.3.6.1.4.1.6141.2.46.3
           wwpSyslogCollMIBCompliances 1.3.6.1.4.1.6141.2.46.3.1
           wwpSyslogCollMIBGroups 1.3.6.1.4.1.6141.2.46.3.2