WWP-LEOS-TRAFFIC-PROFILE-MIB: View SNMP OID List / Download MIB

VENDOR: WORLD WIDE PACKETS


 Home MIB: WWP-LEOS-TRAFFIC-PROFILE-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, WWP-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wwpLeosTrafficProfileMIB 1.3.6.1.4.1.6141.2.60.27
Added objects wwpLeosTrafficProfileStdHCAcceptedBytes and wwpLeosTrafficProfileStdHCDroppedBytes.
       wwpLeosTrafficProfileObjects 1.3.6.1.4.1.6141.2.60.27.1
           wwpLeosTrafficProfile 1.3.6.1.4.1.6141.2.60.27.1.1
               wwpLeosTrafficProfileGlobalAttrs 1.3.6.1.4.1.6141.2.60.27.1.1.1
                   wwpLeosTrafficProfileGlobalState 1.3.6.1.4.1.6141.2.60.27.1.1.1.1 integer read-write
Setting this object to 'enabled' will enable traffic profile globally. Setting this object to 'disabled' will disable traffic profile globally. Enumeration: 'disabled': 2, 'enabled': 1.
                   wwpLeosTrafficProfileGlobalMeterProvisioningState 1.3.6.1.4.1.6141.2.60.27.1.1.1.2 integer read-write
Setting this object to 'pir' will allow meters to be provisioned in pir. Setting this object to 'eir' will allow meters to be provisioned in eir. Enumeration: 'pir': 1, 'eir': 2.
               wwpLeosTrafficProfilePortTable 1.3.6.1.4.1.6141.2.60.27.1.1.2 no-access
A table of traffic profile port entries.
                   wwpLeosTrafficProfilePortEntry 1.3.6.1.4.1.6141.2.60.27.1.1.2.1 no-access
A traffic profile entry in the wwpLeosTrafficProfilePortTable.
                       wwpLeosTrafficProfilePort 1.3.6.1.4.1.6141.2.60.27.1.1.2.1.1 integer read-only
This object specifies the port number also used as index in the table.
                       wwpLeosTrafficProfileAdminState 1.3.6.1.4.1.6141.2.60.27.1.1.2.1.2 integer read-write
Setting this object to 'enabled' will administratively enable traffic profiling on the given port. Setting this object to 'disabled' will administratively disable traffic profiling on the given port. Enumeration: 'disabled': 2, 'enabled': 1.
                       wwpLeosTrafficProfileOperState 1.3.6.1.4.1.6141.2.60.27.1.1.2.1.3 integer read-only
This object specifies operational state of the traffic profiling for a given port on the device. Enumeration: 'disabled': 2, 'enabled': 1.
                       wwpLeosTrafficProfileMode 1.3.6.1.4.1.6141.2.60.27.1.1.2.1.4 integer read-write
This object specifies the mode of traffic profiling for a given port. Enumeration: 'cascadedIpPrec': 3, 'none': 14, 'cascadedDot1dPri': 1, 'stdDiffServ': 5, 'stdDscp': 8, 'cascadedDscp': 2, 'stdVlanDot1DPri': 9, 'stdDot1': 4, 'stdIpPrec': 6, 'stdVlanIpp': 10, 'stdVlanDscp': 11, 'hierarchicalPort': 13, 'hierarchicalVlan': 12, 'advanced': 15, 'stdVlan': 7.
                       wwpLeosTrafficProfileNonConformCascadedProfile 1.3.6.1.4.1.6141.2.60.27.1.1.2.1.5 integer read-write
This object specifies that the device should map non-conformance traffic ingressing on a given port to cascaded profile specified by wwpLeosTrafficProfileNonConformCascadedProfile. This object will become effective only if device is running in cascaded profile mode. This object will be set to drop if using on a device that does not have cascaded-profiling Enumeration: 'deprecated': 4, 'drop': 0, 'profile1': 1, 'profile3': 3, 'profile2': 2.
                       wwpLeosTrafficProfileNonConformStdProfile 1.3.6.1.4.1.6141.2.60.27.1.1.2.1.6 integer read-write
This object specifies that the device should map non-conformance traffic ingressing on a given port to standard profile specified by wwpLeosTrafficProfileNonConformStdProfile. This object will become effective only if device is running in standard profile mode.
                       wwpLeosTrafficProfileArpCascadedProfile 1.3.6.1.4.1.6141.2.60.27.1.1.2.1.7 integer read-write
This object specifies that the device should map ARP frames ingressing on a given port to cascaded profile specified by wwpLeosTrafficProfileArpCascadedProfile. This object will be set to bypass if using on a device that does not have cascaded-profiling. Enumeration: 'deprecated': 4, 'profile1': 1, 'profile3': 3, 'bypass': 0, 'profile2': 2.
                       wwpLeosTrafficProfileArpStdProfile 1.3.6.1.4.1.6141.2.60.27.1.1.2.1.8 integer read-write
This object specifies that the device should map ARP frames ingressing on a given port to standard profile specified by wwpLeosTrafficProfileArpStdProfile. This object will become effective only if device is running in standard profile mode.
                       wwpLeosTrafficProfileMeterPool 1.3.6.1.4.1.6141.2.60.27.1.1.2.1.9 integer read-write
This object specifies the Meter Pool Index for a port.
                       wwpLeosTrafficProfileClassifierMode 1.3.6.1.4.1.6141.2.60.27.1.1.2.1.10 integer read-write
This object specifies how narrow or wide we classify traffic to a port's meters. Enumeration: 'wide': 2, 'narrow': 1.
               wwpLeosTrafficProfileCascadedTable 1.3.6.1.4.1.6141.2.60.27.1.1.3 no-access
A table of cascaded traffic profile entries. To create an entry in this table the following criteria must be met. - All indexes must be specified. - wwpLeosTrafficProfileCascadedCir must be specified - if wwpLeosTrafficProfileCascadedPir is not specified or is specified and is < wwpLeosTrafficProfileCascadedCir then device will make wwpLeosTrafficProfileCascadedPir = wwpLeosTrafficProfileCascadedCir - wwpLeosTrafficProfileCascadedStatus must be set to createandgo
                   wwpLeosTrafficProfileCascadedEntry 1.3.6.1.4.1.6141.2.60.27.1.1.3.1 no-access
A cascaded traffic profile entry in the wwpLeosTrafficProfileCascadedTable.
                       wwpLeosTrafficProfileCascadedIndx 1.3.6.1.4.1.6141.2.60.27.1.1.3.1.1 integer read-only
This object is used as index in the table and it represents profile index which can be 1 or 2 or 3.
                       wwpLeosTrafficProfileCascadedCir 1.3.6.1.4.1.6141.2.60.27.1.1.3.1.2 integer32 read-write
This object specifies the cir associated with a given cascaded traffic profile. Units are kbps.
                       wwpLeosTrafficProfileCascadedPir 1.3.6.1.4.1.6141.2.60.27.1.1.3.1.3 integer32 read-write
This object specifies the pir associated with a given cascaded traffic profile. Units are kbps.
                       wwpLeosTrafficProfileCascadedStatus 1.3.6.1.4.1.6141.2.60.27.1.1.3.1.5 rowstatus read-only
Setting this object to 'createandgo' along with wwpLeosTrafficProfileCascadedCir and wwpLeosTrafficProfileCascadedPir will result in creating an cascaded traffic profile entry. Setting this object to 'destroy' will delete the entry from the table.
               wwpLeosTrafficProfileStdTable 1.3.6.1.4.1.6141.2.60.27.1.1.4 no-access
A table of Std traffic profile entries. To create entry in this table following criteria must be met. - All indexes must be specified. - wwpLeosTrafficProfileStdCir must be specified - if wwpLeosTrafficProfileStdPir is not specified or is specified and is < wwpLeosTrafficProfileStdCir then device will make wwpLeosTrafficProfileStdPir = wwpLeosTrafficProfileStdCir - wwpLeosTrafficProfileStdStatus must be set to createandgo
                   wwpLeosTrafficProfileStdEntry 1.3.6.1.4.1.6141.2.60.27.1.1.4.1 no-access
A standard traffic profile entry in the wwpLeosTrafficProfileStdTable.
                       wwpLeosTrafficProfileStdIndx 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.1 integer read-only
This object is used as index in the table and it represents profile index which can be 1 through 64.
                       wwpLeosTrafficProfileStdCir 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.2 integer32 read-write
This object specifies the cir associated with a given standard traffic profile.
                       wwpLeosTrafficProfileStdPir 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.3 integer32 read-write
This object specifies the pir associated with a given standard traffic profile.
                       wwpLeosTrafficProfileStdName 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.4 displaystring read-only
The name associated with this profile. This must be unique per port. The name does not have to be set on create. However, when updating the name, it must have some value - zero-string not support.
                       wwpLeosTrafficProfileStdStatus 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.5 rowstatus read-only
Setting this object to 'createandgo' along with wwpLeosTrafficProfileStdCir and or wwpLeosTrafficProfileStdPir will result in creating an standard traffic profile entry. Setting this object to 'destroy' will delete the entry from the table.
                       wwpLeosTrafficProfileStdVlan 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.6 integer read-write
This object specifies the VLAN associated with a profile.
                       wwpLeosTrafficProfileStdCbs 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.7 unsigned32 read-write
This object specifies the Commited burst size associated with a given standard traffic profile.
                       wwpLeosTrafficProfileStdEbs 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.8 unsigned32 read-write
This object specifies the Excess burst size associated with a given standard traffic profile.
                       wwpLeosTrafficProfileStdDscpRemarkPolicy 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.9 integer read-write
Leave => Don't remark the frame. Fixed => Remark the DSCP of a frame with the fixed-dscp value for IP frames which classify to the Traffic Profile Enumeration: 'leave': 1, 'fixed': 2.
                       wwpLeosTrafficProfileStdFixedDscp 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.10 integer read-write
Fixed DSCP value to use for frames classifying to a Traffic Profile when the dscp-remark-policy id 'Fixed
                       wwpLeosTrafficProfileStdUnsetVlan 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.11 integer read-write
Setting This object to unset(1) unsets the VLAN associated with a profile. This object returns a value of none(0) on get. Enumeration: 'none': 0, 'unset': 1.
                       wwpLeosTrafficProfileStdDefaultProfile 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.12 integer read-only
Setting this object to true(1) during createAndGo(4) will create Tier-1 default profile. Enumeration: 'false': 2, 'true': 1.
                       wwpLeosTrafficeProfileStdDrop 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.13 integer read-only
Setting this value to true causes metering to cease and all traffic to drop. Enumeration: 'false': 2, 'true': 1.
                       wwpLeosTrafficProfileStdParentIndex 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.14 integer32 read-only
This mib object is set when creating Child traffic profile to specify the parent index
                       wwpLeosTrafficProfileStdChildMode 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.15 integer read-only
When the port mode is hierarchical-vlan, then the valid child-modes are dot1dPri, ipprec, dscp. When the port mode is hierarchical-port then the valid childModes is dot1dPri, ipprec, dscp and vlan(4). Enumeration: 'none': 99, 'vlan': 4, 'dot1dPri': 1, 'dscp': 3, 'ipprec': 2, 'vlanCos': 5.
                       wwpLeosTrafficProfileStdStatsMonitor 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.16 integer read-write
To disable stats collection, set this object to off(2). To enable stats collection, set this object to on(1). Enumeration: 'on': 1, 'off': 2.
                       wwpLeosTrafficProfileStdUntaggedState 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.17 integer read-write
To enable this profile to match untagged traffic set this to on(1). To disable, set to off(2) Enumeration: 'on': 1, 'off': 2.
                       wwpLeosTrafficProfileStdVs 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.18 displaystring read-only
The virtual-switch name associated with this profile. The virtual-switch name must exist before using it as a profile classifier.
                       wwpLeosTrafficProfileStdRemarkColorPolicy 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.19 integer read-write
This sets the profile's color remarking policy at the meter output. Enumeration: 'leave': 1, 'greenRemarkToYellow': 3, 'yellowRemarkToGreen': 2.
                       wwpLeosTrafficProfileStdRemarkRcosPolicy 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.20 integer read-write
This sets the profile's rcos remarking policy based on meter color. Enumeration: 'leave': 1, 'remarkYellow': 3, 'remarkBoth': 4, 'remarkGreen': 2.
                       wwpLeosTrafficProfileStdYellowRemarkRcos 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.21 integer read-write
This sets the profile's rcos remarking policy based on meter color.
                       wwpLeosTrafficProfileStdGreenRemarkRcos 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.22 integer read-write
This sets the profile's rcos remarking policy based on meter color.
                       wwpLeosTrafficProfileStdIngressColorAware 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.23 integer read-write
This sets the profile's meter ingress color awareness. Enumeration: 'on': 1, 'off': 2.
                       wwpLeosTrafficProfileStdEir 1.3.6.1.4.1.6141.2.60.27.1.1.4.1.24 integer32 read-write
This object specifies the eir associated with a given standard traffic profile. Sets/Gets on this are only valid when the global meter-provisioning mode is set to eir. All other times it will be ignored and return 0
               wwpLeosTrafficProfileStdDot1dTable 1.3.6.1.4.1.6141.2.60.27.1.1.5 no-access
A table of Std dot1d traffic profile entries. To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdDot1dStatus to 'createandgo'. - set wwpLeosTrafficProfileStdDot1dToProfile to valid profile. To delete entry set wwpLeosTrafficProfileStdDot1dStatus to destroy.
                   wwpLeosTrafficProfileStdDot1dEntry 1.3.6.1.4.1.6141.2.60.27.1.1.5.1 no-access
A standard dot1d traffic profile entry in the wwpLeosTrafficProfileStdDot1dTable.
                       wwpLeosTrafficProfileStdDot1d 1.3.6.1.4.1.6141.2.60.27.1.1.5.1.1 integer read-only
This object specifies the dot1d priority for the associated standard profile entry in the wwpLeosTrafficProfileStdDot1dTable table.
                       wwpLeosTrafficProfileStdDot1dToProfile 1.3.6.1.4.1.6141.2.60.27.1.1.5.1.2 integer read-write
This object specifies the profile to which wwpLeosTrafficProfileStdDot1d must be mapped to.
                       wwpLeosTrafficProfileStdDot1dStatus 1.3.6.1.4.1.6141.2.60.27.1.1.5.1.3 rowstatus read-only
To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdDot1dStatus to 'createandgo'. - set wwpLeosTrafficProfileStdDot1dToProfile to valid profile. To delete entry set wwpLeosTrafficProfileStdDot1dStatus to destroy.
               wwpLeosTrafficProfileStdIpPrecTable 1.3.6.1.4.1.6141.2.60.27.1.1.6 no-access
A table of standard ip precedence traffic profile entries. To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdIpPrecStatus to 'createandgo'. - set wwpLeosTrafficProfileStdIpPrecToProfile to valid profile. To delete entry set wwpLeosTrafficProfileStdIpPrecStatus to destroy.
                   wwpLeosTrafficProfileStdIpPrecEntry 1.3.6.1.4.1.6141.2.60.27.1.1.6.1 no-access
A standard ip precedence traffic profile entry in the wwpLeosTrafficProfileStdTable.
                       wwpLeosTrafficProfileStdIpPrec 1.3.6.1.4.1.6141.2.60.27.1.1.6.1.1 integer read-only
This object specifies the ip precedence for the associated standard profile entry in wwpLeosTrafficProfileStdTable.
                       wwpLeosTrafficProfileStdIpPrecToProfile 1.3.6.1.4.1.6141.2.60.27.1.1.6.1.2 integer read-write
This object specifies the profile to which wwpLeosTrafficProfileStdIpPrec must be mapped to.
                       wwpLeosTrafficProfileStdIpPrecStatus 1.3.6.1.4.1.6141.2.60.27.1.1.6.1.3 rowstatus read-only
To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdIpPrecStatus to 'createandgo'. - set wwpLeosTrafficProfileStdIpPrecToProfile to valid profile. To delete entry set wwpLeosTrafficProfileStdIpPrecStatus to destroy.
               wwpLeosTrafficProfileStdPhbTable 1.3.6.1.4.1.6141.2.60.27.1.1.7 no-access
A table of standard phb traffic profile entries. To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdPhbStatus to 'createandgo'. - set wwpLeosTrafficProfileStdPhbToProfile to valid profile. To delete entry set wwpLeosTrafficProfileStdPhbStatus to destroy.
                   wwpLeosTrafficProfileStdPhbEntry 1.3.6.1.4.1.6141.2.60.27.1.1.7.1 no-access
A standard Phb traffic profile entry in the wwpLeosTrafficProfileStdTable.
                       wwpLeosTrafficProfileStdPhb 1.3.6.1.4.1.6141.2.60.27.1.1.7.1.1 integer read-only
This object specifies the diff-serv values for the associated standard profile entry in wwpLeosTrafficProfileStdTable. Enumeration: 'ef': 13, 'af1': 9, 'af4': 12, 'af2': 10, 'af3': 11, 'cs5': 6, 'cs4': 5, 'cs7': 8, 'cs6': 7, 'cs1': 2, 'cs0': 1, 'cs3': 4, 'cs2': 3.
                       wwpLeosTrafficProfileStdPhbToProfile 1.3.6.1.4.1.6141.2.60.27.1.1.7.1.2 integer read-write
This object specifies the profile to which wwpLeosTrafficProfileStdPhb must be mapped to.
                       wwpLeosTrafficProfileStdPhbStatus 1.3.6.1.4.1.6141.2.60.27.1.1.7.1.3 rowstatus read-only
To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdPhbStatus to 'createandgo'. - set wwpLeosTrafficProfileStdPhbToProfile to valid profile. To delete entry set wwpLeosTrafficProfileStdPhbStatus to destroy.
               wwpLeosTrafficProfileCascadedStatsTable 1.3.6.1.4.1.6141.2.60.27.1.1.8 no-access
A table of cascaded profile stats.
                   wwpLeosTrafficProfileCascadedStatsEntry 1.3.6.1.4.1.6141.2.60.27.1.1.8.1 no-access
A cascaded traffic profile entry in the wwpLeosTrafficProfileCascadedStatsTable.
                       wwpLeosTrafficProfileCascadedAcceptedBytesHi 1.3.6.1.4.1.6141.2.60.27.1.1.8.1.1 counter32 read-only
This object specifies the higher bytes of accepted frames of given cascaded profile.
                       wwpLeosTrafficProfileCascadedAcceptedBytesLo 1.3.6.1.4.1.6141.2.60.27.1.1.8.1.2 counter32 read-only
This object specifies the lower bytes of accepted frames of given cascaded profile.
                       wwpLeosTrafficProfileCascadedDroppedBytesHi 1.3.6.1.4.1.6141.2.60.27.1.1.8.1.3 counter32 read-only
This object specifies the higher bytes of dropped frames of given cascaded profile.
                       wwpLeosTrafficProfileCascadedDroppedBytesLo 1.3.6.1.4.1.6141.2.60.27.1.1.8.1.4 counter32 read-only
This object specifies the lower bytes of dropped frames of given cascaded profile.
                       wwpLeosTrafficProfileCascadedRemarkedBytesHi 1.3.6.1.4.1.6141.2.60.27.1.1.8.1.5 counter32 read-only
This object specifies the higher bytes of remarked frames of given cascaded profile.
                       wwpLeosTrafficProfileCascadedRemarkedBytesLo 1.3.6.1.4.1.6141.2.60.27.1.1.8.1.6 counter32 read-only
This object specifies the lower bytes of remarked frames of given cascaded profile.
               wwpLeosTrafficProfileStdStatsTable 1.3.6.1.4.1.6141.2.60.27.1.1.9 no-access
A table of standard profile stats.
                   wwpLeosTrafficProfileStdStatsEntry 1.3.6.1.4.1.6141.2.60.27.1.1.9.1 no-access
The entry in wwpLeosTrafficProfileStdStatsTable.
                       wwpLeosTrafficProfileStdAcceptedBytesHi 1.3.6.1.4.1.6141.2.60.27.1.1.9.1.1 counter32 read-only
This object specifies the higher bytes of accepted frames of given standard profile.
                       wwpLeosTrafficProfileStdAcceptedBytesLo 1.3.6.1.4.1.6141.2.60.27.1.1.9.1.2 counter32 read-only
This object specifies the lower bytes of accepted frames of given standard profile.
                       wwpLeosTrafficProfileStdDroppedBytesHi 1.3.6.1.4.1.6141.2.60.27.1.1.9.1.3 counter32 read-only
This object specifies the higher bytes of dropped frames of given standard profile.
                       wwpLeosTrafficProfileStdDroppedBytesLo 1.3.6.1.4.1.6141.2.60.27.1.1.9.1.4 counter32 read-only
This object specifies the higher bytes of dropped frames of given standard profile.
                       wwpLeosTrafficProfileStdHCAcceptedBytes 1.3.6.1.4.1.6141.2.60.27.1.1.9.1.5 counter64 read-only
This object specifies the bytes of accepted frame data by a given standard profile.
                       wwpLeosTrafficProfileStdHCDroppedBytes 1.3.6.1.4.1.6141.2.60.27.1.1.9.1.6 counter64 read-only
This object specifies the bytes of dropped frame data by a given standard profile.
                       wwpLeosTrafficProfileStdHCAcceptedPackets 1.3.6.1.4.1.6141.2.60.27.1.1.9.1.7 counter64 read-only
This object specifies the number of packets passed by a standard profile
                       wwpLeosTrafficProfileStdHCDroppedPackets 1.3.6.1.4.1.6141.2.60.27.1.1.9.1.8 counter64 read-only
This object specifies the number of packets dropped by a standard profile
               wwpLeosTrafficProfileCascadedGlobalTable 1.3.6.1.4.1.6141.2.60.27.1.1.10 no-access
A table of global attributes used by cascaded traffic profile table. To create entry in this table following criteria must be met. - All indexes must be specified. - wwpLeosTrafficProfileCascadedGlobalDot1d,wwpLeosTrafficProfileCascadedGlobalIpPrec and wwpLeosTrafficProfileCascadedGlobalDscp may be specified. - wwpLeosTrafficProfileCascadedGlobalName may be specified. - wwpLeosTrafficProfileCascadedGlobalStatus must be set to createandgo
                     wwpLeosTrafficProfileCascadedGlobalEntry 1.3.6.1.4.1.6141.2.60.27.1.1.10.1 no-access
A global cascaded traffic profile entry in the wwpLeosTrafficProfileCascadedGlobalTable.
                         wwpLeosTrafficProfileCascadedGlobalDot1d 1.3.6.1.4.1.6141.2.60.27.1.1.10.1.1 integer read-write
This specifies the dot1d priority for a given cascaded traffic profile. If this object returns -1 then it means the value was not set by user and thus doesn't care.
                         wwpLeosTrafficProfileCascadedGlobalIpPrec 1.3.6.1.4.1.6141.2.60.27.1.1.10.1.2 integer read-write
This specifies the ip precedence value for a given cascaded traffic profile. If this object returns -1 then it means the value was not set by user and thus doesn't care.
                         wwpLeosTrafficProfileCascadedGlobalDscp 1.3.6.1.4.1.6141.2.60.27.1.1.10.1.3 integer read-write
This specifies the dscp value for a given cascaded traffic profile. If this object returns -1 then it means the value was not set by user and thus doesn't care.
                         wwpLeosTrafficProfileCascadedGlobalName 1.3.6.1.4.1.6141.2.60.27.1.1.10.1.4 displaystring read-write
The name associated with this profile. This must be unique name per profile. The name does not have to be set on create. However, when updating the name, it must have some value - zero-string not support.
                         wwpLeosTrafficProfileCascadedGlobalStatus 1.3.6.1.4.1.6141.2.60.27.1.1.10.1.5 rowstatus read-only
Setting this object to 'createandgo' will result in creating an global cascaded traffic profile entry. Setting this object to 'destroy' will delete the entry from the table.
               wwpLeosTrafficProfileCascadedTotalStatsTable 1.3.6.1.4.1.6141.2.60.27.1.1.11 no-access
A table of cascaded profile stats.
                     wwpLeosTrafficProfileCascadedTotalStatsEntry 1.3.6.1.4.1.6141.2.60.27.1.1.11.1 no-access
A cascaded traffic profile entry in the wwpLeosTrafficProfileCascadedTotalStatsTable.
                         wwpLeosTrafficProfileCascadedTotalAcceptedBytesHi 1.3.6.1.4.1.6141.2.60.27.1.1.11.1.1 counter32 read-only
This object specifies the higher bytes of accepted frames of given cascaded profile.
                         wwpLeosTrafficProfileCascadedTotalAcceptedBytesLo 1.3.6.1.4.1.6141.2.60.27.1.1.11.1.2 counter32 read-only
This object specifies the lower bytes of accepted frames of given cascaded profile.
                         wwpLeosTrafficProfileCascadedTotalDroppedBytesHi 1.3.6.1.4.1.6141.2.60.27.1.1.11.1.3 counter32 read-only
This object specifies the higher bytes of dropped frames of given cascaded profile.
                         wwpLeosTrafficProfileCascadedTotalDroppedBytesLo 1.3.6.1.4.1.6141.2.60.27.1.1.11.1.4 counter32 read-only
This object specifies the lower bytes of dropped frames of given cascaded profile.
                         wwpLeosTrafficProfileCascadedTotalRemarkedBytesHi 1.3.6.1.4.1.6141.2.60.27.1.1.11.1.5 counter32 read-only
This object specifies the higher bytes of remarked frames of given cascaded profile.
                         wwpLeosTrafficProfileCascadedTotalRemarkedBytesLo 1.3.6.1.4.1.6141.2.60.27.1.1.11.1.6 counter32 read-only
This object specifies the lower bytes of remarked frames of given cascaded profile.
               wwpLeosTrafficProfileStdTotalStatsTable 1.3.6.1.4.1.6141.2.60.27.1.1.12 no-access
A table of standard profile stats.
                     wwpLeosTrafficProfileStdTotalStatsEntry 1.3.6.1.4.1.6141.2.60.27.1.1.12.1 no-access
The entry in wwpLeosTrafficProfileStdTotalStatsTable.
                         wwpLeosTrafficProfileStdTotalAcceptedBytesHi 1.3.6.1.4.1.6141.2.60.27.1.1.12.1.1 counter32 read-only
This object specifies the higher bytes of accepted frames of given standard profile.
                         wwpLeosTrafficProfileStdTotalAcceptedBytesLo 1.3.6.1.4.1.6141.2.60.27.1.1.12.1.2 counter32 read-only
This object specifies the lower bytes of accepted frames of given standard profile.
                         wwpLeosTrafficProfileStdTotalDroppedBytesHi 1.3.6.1.4.1.6141.2.60.27.1.1.12.1.3 counter32 read-only
This object specifies the higher bytes of dropped frames of given standard profile.
                         wwpLeosTrafficProfileStdTotalDroppedBytesLo 1.3.6.1.4.1.6141.2.60.27.1.1.12.1.4 counter32 read-only
This object specifies the higher bytes of dropped frames of given standard profile.
               wwpLeosTrafficProfileStdVlanTable 1.3.6.1.4.1.6141.2.60.27.1.1.14 no-access
A table of Std Vlan Traffic Profile Entries. To create entry in the table following criteria must be met -- set wwpLeosTrafficProfileStdVlanStatus to 'createandgo'. -- set wwpLeosTrafficProfileStdVlan to valid profile. To delete entry set wwpLeosTrafficProfileStdVlanStatus to destroy.
                     wwpLeosTrafficProfileStdVlanEntry 1.3.6.1.4.1.6141.2.60.27.1.1.14.1 no-access
A standard Dscp traffic profile entry in the wwpLeosTrafficProfileStdTable.
                         wwpLeosTrafficProfileStdVlanIndex 1.3.6.1.4.1.6141.2.60.27.1.1.14.1.1 integer no-access
This object specifies the Vlan for the associated standard profile entry in wwpLeosTrafficProfileStdTable.
                         wwpLeosTrafficProfileStdVlanToProfile 1.3.6.1.4.1.6141.2.60.27.1.1.14.1.2 integer read-only
This object specifies the profile to which wwpLeosTrafficProfileStdVlan must be mapped to.
                         wwpLeosTrafficProfileStdVlanStatus 1.3.6.1.4.1.6141.2.60.27.1.1.14.1.3 rowstatus read-only
To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdVlanStatus to 'createandgo'. - set wwpLeosTrafficProfileStdVlanToProfile to valid profile. To delete entry set wwpLeosTrafficProfileStdVlanStatus to destroy.
               wwpLeosTrafficProfileStdDscpTable 1.3.6.1.4.1.6141.2.60.27.1.1.15 no-access
A table of standard Dscp traffic profile entries. To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdDscpStatus to 'createandgo'. - set wwpLeosTrafficProfileStdDscpToProfile to valid profile. To delete entry set wwpLeosTrafficProfileStdDscpStatus to destroy.
                     wwpLeosTrafficProfileStdDscpEntry 1.3.6.1.4.1.6141.2.60.27.1.1.15.1 no-access
A standard Dscp traffic profile entry in the wwpLeosTrafficProfileStdTable.
                         wwpLeosTrafficProfileStdDscp 1.3.6.1.4.1.6141.2.60.27.1.1.15.1.1 integer no-access
This object specifies the Dscp for the associated standard profile entry in wwpLeosTrafficProfileStdTable.
                         wwpLeosTrafficProfileStdDscpToProfile 1.3.6.1.4.1.6141.2.60.27.1.1.15.1.2 integer read-only
This object specifies the profile to which wwpLeosTrafficProfileStdDscp must be mapped to.
                         wwpLeosTrafficProfileStdDscpStatus 1.3.6.1.4.1.6141.2.60.27.1.1.15.1.3 rowstatus read-only
To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdDscpStatus to 'createandgo'. - set wwpLeosTrafficProfileStdDscpToProfile to valid profile. To delete entry set wwpLeosTrafficProfileStdDscpStatus to destroy.
               wwpLeosTrafficProfileMeterPoolTable 1.3.6.1.4.1.6141.2.60.27.1.1.16 no-access
A Table of Meter Pool
                     wwpLeosTrafficProfileMeterPoolEntry 1.3.6.1.4.1.6141.2.60.27.1.1.16.1 no-access
A Meter Pool Entry in wwpLeosTrafficProfileMeterPoolTable
                         wwpLeosTrafficProfileMeterPoolIndex 1.3.6.1.4.1.6141.2.60.27.1.1.16.1.1 integer no-access
A Meter Pool Index
                         wwpLeosTrafficProfileMeterPoolName 1.3.6.1.4.1.6141.2.60.27.1.1.16.1.2 displaystring read-only
A Meter Pool Name
                         wwpLeosTrafficProfileMeterPoolNumOfMeters 1.3.6.1.4.1.6141.2.60.27.1.1.16.1.3 integer32 read-only
Number of Meters for a pool
                         wwpLeosTrafficProfileMeterPoolMetersUsed 1.3.6.1.4.1.6141.2.60.27.1.1.16.1.4 integer32 read-only
Number of Used Meters in a Pool
                         wwpLeosTrafficProfileMeterPoolNumOfStats 1.3.6.1.4.1.6141.2.60.27.1.1.16.1.5 integer32 read-only
Number of Stats Counters for a pool
                         wwpLeosTrafficProfileMeterPoolStatsUsed 1.3.6.1.4.1.6141.2.60.27.1.1.16.1.6 integer32 read-only
Number of Used Stats Counters in a Pool
                         wwpLeosTrafficProfileMeterPoolNumOfClassifiers 1.3.6.1.4.1.6141.2.60.27.1.1.16.1.7 integer32 read-only
Number of Classifiers for a pool
                         wwpLeosTrafficProfileMeterPoolClassifiersUsed 1.3.6.1.4.1.6141.2.60.27.1.1.16.1.8 integer32 read-only
Number of Used Classifiers in a Pool
               wwpLeosTrafficProfileTosStampTable 1.3.6.1.4.1.6141.2.60.27.1.1.20 no-access
A table of TosStamps entries.
                     wwpLeosTrafficProfileTosStampEntry 1.3.6.1.4.1.6141.2.60.27.1.1.20.1 no-access
The entry in wwpLeosTrafficProfileTosStampTable.
                         wwpLeosTrafficProfileTosStampState 1.3.6.1.4.1.6141.2.60.27.1.1.20.1.1 integer read-write
This object specifies the state of the TOS Stamp on a port Enumeration: 'on': 1, 'off': 2.
                         wwpLeosTrafficProfileTosStampValue 1.3.6.1.4.1.6141.2.60.27.1.1.20.1.2 integer read-write
This object specifies the Value of the TOS Stamp. For IP prec left shift the value by 3 bits.
               wwpLeosTrafficProfileIpDscpTable 1.3.6.1.4.1.6141.2.60.27.1.1.21 no-access
A table of IpDscp entries.
                     wwpLeosTrafficProfileIpDscpEntry 1.3.6.1.4.1.6141.2.60.27.1.1.21.1 no-access
The entry in wwpLeosTrafficProfileIpDscpTable.
                         wwpLeosTrafficProfileIpp0Cs0State 1.3.6.1.4.1.6141.2.60.27.1.1.21.1.1 integer read-write
This object specifies the state of the Ipp0 or cs0 enable disable on a port Enumeration: 'on': 1, 'off': 2.
                         wwpLeosTrafficProfileIpp1Cs1State 1.3.6.1.4.1.6141.2.60.27.1.1.21.1.2 integer read-write
This object specifies the state of the Ipp1 or cs1 enable disable on a port Enumeration: 'on': 1, 'off': 2.
                         wwpLeosTrafficProfileIpp2Cs2State 1.3.6.1.4.1.6141.2.60.27.1.1.21.1.3 integer read-write
This object specifies the state of the Ipp0 or cs0 enable disable on a port Enumeration: 'on': 1, 'off': 2.
                         wwpLeosTrafficProfileIpp3Cs3State 1.3.6.1.4.1.6141.2.60.27.1.1.21.1.4 integer read-write
This object specifies the state of the Ipp3 or cs3 enable disable on a port Enumeration: 'on': 1, 'off': 2.
                         wwpLeosTrafficProfileIpp4Cs4State 1.3.6.1.4.1.6141.2.60.27.1.1.21.1.5 integer read-write
This object specifies the state of the Ipp4 or cs4 enable disable on a port Enumeration: 'on': 1, 'off': 2.
                         wwpLeosTrafficProfileIpp5Cs5State 1.3.6.1.4.1.6141.2.60.27.1.1.21.1.6 integer read-write
This object specifies the state of the Ipp5 or cs5 enable disable on a port Enumeration: 'on': 1, 'off': 2.
                         wwpLeosTrafficProfileIpp6Cs6State 1.3.6.1.4.1.6141.2.60.27.1.1.21.1.7 integer read-write
This object specifies the state of the Ipp6 or cs6 enable disable on a port Enumeration: 'on': 1, 'off': 2.
                         wwpLeosTrafficProfileIpp7Cs7State 1.3.6.1.4.1.6141.2.60.27.1.1.21.1.8 integer read-write
This object specifies the state of the Ipp7 or cs7 enable disable on a port Enumeration: 'on': 1, 'off': 2.
                         wwpLeosTrafficProfileAf1State 1.3.6.1.4.1.6141.2.60.27.1.1.21.1.9 integer read-write
This object specifies the state of the Af1 enable disable on a port Enumeration: 'on': 1, 'off': 2.
                         wwpLeosTrafficProfileAf2State 1.3.6.1.4.1.6141.2.60.27.1.1.21.1.10 integer read-write
This object specifies the state of the Af2 enable disable on a port Enumeration: 'on': 1, 'off': 2.
                         wwpLeosTrafficProfileAf3State 1.3.6.1.4.1.6141.2.60.27.1.1.21.1.11 integer read-write
This object specifies the state of the Af3 enable disable on a port Enumeration: 'on': 1, 'off': 2.
                         wwpLeosTrafficProfileAf4State 1.3.6.1.4.1.6141.2.60.27.1.1.21.1.12 integer read-write
This object specifies the state of the Af4 enable disable on a port Enumeration: 'on': 1, 'off': 2.
                         wwpLeosTrafficProfileEfState 1.3.6.1.4.1.6141.2.60.27.1.1.21.1.13 integer read-write
This object specifies the state of the Ef enable disable on a port Enumeration: 'on': 1, 'off': 2.
               wwpLeosTrafficProfileStdVlanDot1dTable 1.3.6.1.4.1.6141.2.60.27.1.1.40 no-access
A table of Std Vlan dot1d traffic profile entries. To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdDot1dStatus to 'createandgo'. To delete entry set wwpLeosTrafficProfileStdDot1dStatus to destroy.
                     wwpLeosTrafficProfileStdVlanDot1dEntry 1.3.6.1.4.1.6141.2.60.27.1.1.40.1 no-access
A standard dot1d traffic profile entry in the wwpLeosTrafficProfileStdDot1dTable.
                         wwpLeosTrafficProfileStdVlanDot1dStatus 1.3.6.1.4.1.6141.2.60.27.1.1.40.1.1 rowstatus read-only
To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdDot1dStatus to 'createandgo'. To delete entry set wwpLeosTrafficProfileStdDot1dStatus to destroy.
               wwpLeosTrafficProfileStdVlanIpPrecTable 1.3.6.1.4.1.6141.2.60.27.1.1.41 no-access
A table of Std Vlan-Ip prec traffic profile entries. To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdVlanIpPrecStatus to 'createandgo'. To delete entry set wwpLeosTrafficProfileStdVlanIpPrecStatus to destroy.
                     wwpLeosTrafficProfileStdVlanIpPrecEntry 1.3.6.1.4.1.6141.2.60.27.1.1.41.1 no-access
A standard vlan-Ip prec traffic profile entry in the wwpLeosTrafficProfileStdVlanIpPrecTable.
                         wwpLeosTrafficProfileStdVlanIpPrecStatus 1.3.6.1.4.1.6141.2.60.27.1.1.41.1.1 rowstatus read-only
To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdVlanIpPrecStatus to 'createandgo'. To delete entry set wwpLeosTrafficProfileStdVlanIpPrecStatus to destroy.
               wwpLeosTrafficProfileStdVlanDscpTable 1.3.6.1.4.1.6141.2.60.27.1.1.42 no-access
A table of Std Vlan-dscp traffic profile entries. To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdVlanDscpStatus to 'createandgo'. To delete entry set wwpLeosTrafficProfileStdVlanDscpStatus to destroy.
                     wwpLeosTrafficProfileStdVlanDscpEntry 1.3.6.1.4.1.6141.2.60.27.1.1.42.1 no-access
A standard vlan-dscp traffic profile entry in the wwpLeosTrafficProfileStdVlanDscpTable.
                         wwpLeosTrafficProfileStdVlanDscpStatus 1.3.6.1.4.1.6141.2.60.27.1.1.42.1.2 rowstatus read-only
To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdVlanDscpStatus to 'createandgo'. To delete entry set wwpLeosTrafficProfileStdVlanDscpStatus to destroy.
       wwpLeosTrafficProfileNotificationPrefix 1.3.6.1.4.1.6141.2.60.27.2
           wwpLeosTrafficProfileNotifications 1.3.6.1.4.1.6141.2.60.27.2.0
       wwpLeosTrafficProfileMIBConformance 1.3.6.1.4.1.6141.2.60.27.3
           wwpLeosTrafficProfileMIBCompliances 1.3.6.1.4.1.6141.2.60.27.3.1
           wwpLeosTrafficProfileMIBGroups 1.3.6.1.4.1.6141.2.60.27.3.2