WWP-LEOS-PORT-XCVR-MIB: View SNMP OID List / Download MIB

VENDOR: WORLD WIDE PACKETS


 Home MIB: WWP-LEOS-PORT-XCVR-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, WWP-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wwpLeosPortXcvrMIB 1.3.6.1.4.1.6141.2.60.4
Corrected Units changed watts to uW in descriptions.
     wwpLeosPortXcvrMIBObjects 1.3.6.1.4.1.6141.2.60.4.1
         wwpLeosPortXcvr 1.3.6.1.4.1.6141.2.60.4.1.1
             wwpLeosPortXcvrTable 1.3.6.1.4.1.6141.2.60.4.1.1.1 no-access
This table contains descriptions and settings for each of the physical transceiver devices.
                 wwpLeosPortXcvrEntry 1.3.6.1.4.1.6141.2.60.4.1.1.1.1 no-access
The Transciever Device Entry.
                     wwpLeosPortXcvrId 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.1 integer read-only
The ID for the transceiver.
                     wwpLeosPortXcvrOperState 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.2 integer read-only
The operational state of the transceiver. Enumeration: 'disabled': 1, 'faulted': 5, 'notPresent': 4, 'enabled': 2, 'loopback': 3.
                     wwpLeosPortXcvrIdentiferType 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.3 integer read-only
Type for the transceiver. Enumeration: 'gbic': 2, 'reserved': 5, 'solderedType': 3, 'unknown': 1, 'xpak': 12, 'xenpak': 8, 'sfp': 4, 'xff': 10, 'xbi': 7, 'xfp': 9, 'x2': 13, 'vendorSpecific': 6, 'xfpe': 11.
                     wwpLeosPortXcvrExtIdentiferType 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.4 integer read-only
Extended identifier type for this transceiver. Enumeration: 'unknown': 1, 'sfp-gbic': 2.
                     wwpLeosPortXcvrConnectorType 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.5 integer read-only
Type of connector. unknown(1), sc(2), fiberChannelStyle1(3), fiberChannelStyle2(4), bnc/tnc(5), coaxialHeader(6), fiberJack(7), lc(8), mt-rj(9), mu(10), sg(11), opticalPitTail(12), reserved(13..32), hssdc(33), copperPitTail(34), reserved(35..128), vendorSpecific(129..256).
                     wwpLeosPortXcvrType 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.6 integer read-only
Type of Transceiver.
                     wwpLeosPortXcvrVendorName 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.7 displaystring read-only
String containing this transceiver's vendor name.
                     wwpLeosPortXcvrVendorOUI 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.8 octet string read-only
String containing this transceiver's vendor OUI.
                     wwpLeosPortXcvrVendorPN 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.9 displaystring read-only
String containing this transceiver's vendor OUI.
                     wwpLeosPortXcvrRevNum 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.10 displaystring read-only
String containing this transceiver's part revision number.
                     wwpLeosPortXcvrSerialNum 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.11 displaystring read-only
String containing this transceiver's part serial number.
                     wwpLeosPortXcvrEncodingType 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.12 integer read-only
If wwpLeosPortXcvrIdentiferType is SFP, then the following values is defined for the encoding type: unspecified(1), 8B10B(2), 4b5b(3), NRZ(4), Manchester(5), SONET(6), reserved(7-256) If wwpLeosPortXcvrIdentiferType is XFP, then the following values is defined for the encoding type: Bit 7: 64B/66B (yes/no) Bit 6: 8B10B (yes/no) Bit 5: Sonet Scrambled (yes/no) Bit 4: NRZ (yes/no) Bit 3: RZ (yes/no) Bit 2: Tx Dither Support (yes/no) Bit 1: Reserved Bit 0: Reserved Multiple bits can be set at once in the case of XFP. For instance, to indicate support for NRZ(4) and Sonet scrambled (5), the user would see this object with the value of 16 + 32 = 48
                     wwpLeosPortXcvrMfgDate 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.13 displaystring read-only
The transceiver's manufacture date in string.
                     wwpLeosPortXcvrComplianceVer 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.14 integer read-only
This represents the compliance version. Value 1 means digital diagnostic functionality not included or undefined Value 2 means includes functionality defined in Rev 9.0 SFF-8472 Value 3 means TBD Value 4 means TBD.
                     wwpLeosPortXcvrWaveLength 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.15 integer read-only
This represents the wavelength of the transceiver. Units are nano meter.
                     wwpLeosPortXcvrTemperature 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.16 integer read-only
This represents the temperature of the transceiver. Units are in degrees C
                     wwpLeosPortXcvrVcc 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.17 integer read-only
This represents the voltage of the transceiver.
                     wwpLeosPortXcvrBias 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.18 integer read-only
This represents the bias of the transceiver.
                     wwpLeosPortXcvrRxPower 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.19 integer read-only
This represents the measured receive power of the transceiver. Units are micro Watts.
                     wwpLeosPortXcvrTxState 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.20 integer read-only
Indicates whether this transceiver is currently set to transmit. Enumeration: 'disabled': 2, 'enabled': 1.
                     wwpLeosPortXcvrTxFaultStatus 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.21 integer read-only
Indicates the fault status of this transceiver. Enumeration: 'fault': 1, 'noFault': 2.
                     wwpLeosPortXcvrRxRateStatus 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.22 integer read-only
Indicates the Rx rate status of this transceiver. Enumeration: 'disabled': 2, 'enabled': 1.
                     wwpLeosPortXcvr9by125um 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.23 integer read-only
Indicates the link length for 9/125um fiber.
                     wwpLeosPortXcvr50by125um 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.24 integer read-only
Indicates the link length for 50/125um fiber.
                     wwpLeosPortXcvr62dot5by125um 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.25 integer read-only
Indicates the link length for 62.5/125um fiber.
                     wwpLeosPortXcvrCu 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.26 integer read-only
Indicates the link length for copper.
                     wwpLeosPortXcvrTxOutputPw 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.27 integer read-only
Indicates the Tx Output power for the transceiver. Units are micro Watts.
                     wwpLeosPortXcvrLosState 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.28 truthvalue read-only
Indicates the Loss Of Signal State for the optical transceiver. Ports without optical transceiver will always report 'false'.
                     wwpLeosPortXcvrDiagSupported 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.29 truthvalue read-only
Indicates if diagnostics are supported on this transceiver.
                     wwpLeosPortXcvrEnhDiagAlarmSupported 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.30 truthvalue read-only
Indicates if enhanced diagnostics alarms / warnings implemented.
                     wwpLeosPortXcvrEnhDiagSoftTxDisableSupported 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.31 truthvalue read-only
Indicates if enhanced diagnostics soft Tx disable control is implemented.
                     wwpLeosPortXcvrEnhDiagSoftTxFaultSupported 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.32 truthvalue read-only
Indicates if enhanced diagnostics soft Tx fault monitoring is implemented.
                     wwpLeosPortXcvrEnhDiagRxLosSupported 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.33 truthvalue read-only
Indicates if enhanced diagnostics Rx LOS monitoring is implemented.
                     wwpLeosPortXcvrHighTempAlarmThreshold 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.34 integer32 read-only
Indicates the higher threshold for temperature alarm.
                     wwpLeosPortXcvrLowTempAlarmThreshold 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.35 integer32 read-only
Indicates the lower threshold for temperature alarm.
                     wwpLeosPortXcvrHighVccAlarmThreshold 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.36 integer32 read-only
Indicates the higher threshold for voltage alarm.
                     wwpLeosPortXcvrLowVccAlarmThreshold 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.37 integer32 read-only
Indicates the lower threshold for voltage alarm.
                     wwpLeosPortXcvrHighBiasAlarmThreshold 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.38 integer32 read-only
Indicates the higher threshold for bias alarm.
                     wwpLeosPortXcvrLowBiasAlarmThreshold 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.39 integer32 read-only
Indicates the lower threshold for bias alarm.
                     wwpLeosPortXcvrHighTxPwAlarmThreshold 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.40 integer32 read-only
Indicates the higher threshold for Tx power alarm. Units are micro watts
                     wwpLeosPortXcvrLowTxPwAlarmThreshold 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.41 integer32 read-only
Indicates the lower threshold for Tx power alarm. Units are micro watts.
                     wwpLeosPortXcvrHighRxPwAlarmThreshold 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.42 integer32 read-only
Indicates the higher threshold for Rx power alarm. Units are micro watts.
                     wwpLeosPortXcvrLowRxPwAlarmThreshold 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.43 integer32 read-only
Indicates the lower threshold for Rx power alarm. Units are micro watts.
                     wwpLeosPortXcvrEnhDiagRateSelectSupported 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.44 truthvalue read-only
Indicates if enhanced diagnostics soft rate select control is implemented.
                     wwpLeosPortXcvrAdminState 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.45 integer read-write
The admin state of the transceiver. Enumeration: 'disabled': 1, 'enabled': 2, 'loopback': 3.
                     wwpLeosPortXcvrXfpMinBitRate 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.70 integer read-only
This represents the minimum bit rate.
                     wwpLeosPortXcvrXfpMaxBitRate 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.71 integer read-only
This represents the maximum bit rate.
                     wwpLeosPortXcvrXfpLinkLenSmf1km 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.72 integer read-only
This represents the length (SMF fiber) 1km.
                     wwpLeosPortXcvrXfpLinkLenE50u2m 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.73 integer read-only
This represents the length (ext. BW MMF) 2m.
                     wwpLeosPortXcvrXfpLinkLen50u1m 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.74 integer read-only
This represents the length (50um) 1m.
                     wwpLeosPortXcvrXfpLinkLen62dot5u1m 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.75 integer read-only
This represents the length (62.5um) 1m.
                     wwpLeosPortXcvrXfpLinkLenCopper1m 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.76 integer read-only
This represents the length (copper) 1m.
                     wwpLeosPortXcvrXfpDevTech 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.77 integer read-only
This represents the device technology. Enumeration: 'dfb1550nm': 6, 'reserved': 11, 'vcsel1310nm': 2, 'vcsel850nm': 1, 'vcsel1550nm': 3, 'eml1310nm': 7, 'eml1550nm': 8, 'fp1310nm': 4, 'copperOrOther': 9, 'dfb1310nm': 5, 'tunable1550nm': 10.
                     wwpLeosPortXcvrXfpTransmitterTech 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.78 integer read-only
This represents the device transmitter technology: Bit 3: Wavelength Control (active/none) Bit 2: Transmitter Cooling (cooled/uncooled) Bit 1: Detector Type (apd/pin) Bit 0: Transmitter Tuning (Tunable/non-Tunable)
                     wwpLeosPortXcvrXfpCdrSupport 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.79 integer read-only
This represents the CDR support: Bit 7: 9.95 Gb/s (yes/no) Bit 6: 10.3 Gb/s (yes/no) Bit 5: 10.5 Gb/s (yes/no) Bit 4: 10.7 Gb/s (yes/no) Bit 3: 11.1 Gb/s (yes/no) Bit 2: N/A Bit 1: Lineside Loopback (yes/no) Bit 0: XFI Loopback (yes/no)
                     wwpLeosPortXcvrXfpWaveLengthTol 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.80 integer read-only
This represents the wavelength tolerance.
                     wwpLeosPortXcvrXfpMaxCaseTemp 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.81 integer read-only
This represents the maximum case temperature.
                     wwpLeosPortXcvrXfpMaxPower 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.82 integer read-only
This represents the maximum power dissipation.
                     wwpLeosPortXcvrXfpMax5vCurrent 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.83 integer read-only
This represents the 5.0 Volt Max Current.
                     wwpLeosPortXcvrXfpMax3p3vCurrent 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.84 integer read-only
This represents the 3.3 Volt Max Current.
                     wwpLeosPortXcvrXfpMax1p8vCurrent 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.85 integer read-only
This represents the 1.8 Volt Max Current.
                     wwpLeosPortXcvrXfpMaxNeg5p2vCurrent 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.86 integer read-only
This represents the -5.2 Volt Max Current.
                     wwpLeosPortXcvrXfpDiagMonitorType 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.87 integer read-only
This represents the diag monitor type: Bit 4 indicates BER support. Bit 3 indidates the Rx Power Meas. type of Avg or OMA.
                     wwpLeosPortXcvrXfpEnhancedOptions 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.88 integer read-only
This represents the enhanced options: Bit 7: VPS Support (yes/no) Bit 6: Soft TX_DISABLE (yes/no) Bit 5: Soft P_down (yes/no) Bit 4: VPS LV Regulator Mode (yes/no) Bit 3: VPS bypassed Reg. Mode (yes/no) Bit 2: Active FEC Ctrl (yes/no) Bit 1: Wavelength or frequency Tunability (yes/no) Bit 0: CMU Support Mode (yes/no)
                     wwpLeosPortXcvrXfpAuxMonitoringInput1 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.89 integer read-only
This represents the Aux monitoring of A/D input 1. Enumeration: 'unknown': 15, 'none': 1, 'reserved': 3, 'voltageNeg5p2V': 10, 'voltage5VCurrent': 11, 'voltage3p3VCurrent': 12, 'laserWavelength': 6, 'voltageNeg5p2VCurrent': 14, 'voltage1p8VCurrent': 13, 'aPDBiasVoltage': 2, 'voltage5V': 7, 'voltage3p3V': 8, 'voltage1p8V': 9, 'tECCurrentMa': 4, 'laserTemp': 5.
                     wwpLeosPortXcvrXfpAuxMonitoringInput2 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.90 integer read-only
This represents the Aux monitoring of A/D input 2. Enumeration: 'unknown': 15, 'none': 1, 'reserved': 3, 'voltageNeg5p2V': 10, 'voltage5VCurrent': 11, 'voltage3p3VCurrent': 12, 'laserWavelength': 6, 'voltageNeg5p2VCurrent': 14, 'voltage1p8VCurrent': 13, 'aPDBiasVoltage': 2, 'voltage5V': 7, 'voltage3p3V': 8, 'voltage1p8V': 9, 'tECCurrentMa': 4, 'laserTemp': 5.
                     wwpLeosPortXcvrAdminFrequency 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.91 unsigned32 read-write
The admin frequency of the transceiver in GHz
                     wwpLeosPortXcvrXfpLaserFirstFrequency 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.92 unsigned32 read-only
This represents the first frequency in GHz
                     wwpLeosPortXcvrXfpLaserLastFrquency 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.93 unsigned32 read-only
This represents the last frequency in GHz
                     wwpLeosPortXcvrXfpMaxGridScacing 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.94 integer read-only
This represents the maximun support grid spacing in GHz
                     wwpLeosPortXcvrXfpChannelNum 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.95 integer read-only
This represents the channel number
                     wwpLeosPortXcvrXfpFrequencyError 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.96 integer read-only
This represents the frequency error
                     wwpLeosPortXcvrAdminWavelength 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.97 unsigned32 read-write
The admin wavelength of the transceiver in pico-meter
                     wwpLeosPortXcvrAdminChannel 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.98 unsigned32 read-write
The admin channel number of the transceiver
                     wwpLeosPortXcvrXfpLaserFirstWavelenth 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.99 unsigned32 read-only
This represents the first wavelength in pico meter
                     wwpLeosPortXcvrXfpLaserLastWavelength 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.100 unsigned32 read-only
This represents the last wavelength in pico meter
                     wwpLeosPortXcvrXfpLaserFirstChannel 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.101 unsigned32 read-only
This represents the first channel number
                     wwpLeosPortXcvrXfpLaserLastChannel 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.102 unsigned32 read-only
This represents the last channel number
                     wwpLeosPortXcvrOperFrequency 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.103 unsigned32 read-only
The operational frequency of the transceiver in GHz
                     wwpLeosPortXcvrOperWavelength 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.104 unsigned32 read-only
The operational wavelength of the transceiver in pico-meter
                     wwpLeosPortXcvrRxDbmPower 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.105 integer32 read-only
Indicates the Rx power level in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating point and divide by 10,000.
                     wwpLeosPortXcvrTxDbmPower 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.106 integer32 read-only
Indicates the Tx power level in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating point and divide by 10,000.
                     wwpLeosPortXcvrHighTxDbmPwAlarmThreshold 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.107 integer32 read-only
Indicates the higher threshold for Tx power alarm in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating point and divide by 10,000.
                     wwpLeosPortXcvrLowTxDbmPwAlarmThreshold 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.108 integer32 read-only
Indicates the lower threshold for Tx power alarm in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating point and divide by 10,000.
                     wwpLeosPortXcvrHighRxDbmPwAlarmThreshold 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.109 integer32 read-only
Indicates the higher threshold for Rx power alarm in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating point and divide by 10,000.
                     wwpLeosPortXcvrLowRxDbmPwAlarmThreshold 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.110 integer32 read-only
Indicates the lower threshold for Rx power alarm in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating point and divide by 10,000.
         wwpLeosPortXcvrNotif 1.3.6.1.4.1.6141.2.60.4.1.2
             wwpLeosPortXcvrEventType 1.3.6.1.4.1.6141.2.60.4.1.2.1 integer read-only
Indicates if the Xcvr specified by the wwpLeosPortXcvrId has come up, gone down or has been selected. Enumeration: 'disabled': 4, 'enabled': 3, 'removed': 2, 'inserted': 1.
             wwpLeosPortXcvrErrorType 1.3.6.1.4.1.6141.2.60.4.1.2.2 integer read-only
Indicates if the Xcvr specified by the wwpLeosPortXcvrId is faulted because of checksum failure or optical fault. This object only makes sense if transceiver has been detected faulted otherwise it returns none. Enumeration: 'none': 0, 'opticalFault': 2, 'chksumFailed': 1.
     wwpLeosPortXcvrMIBNotificationPrefix 1.3.6.1.4.1.6141.2.60.4.2
         wwpLeosPortXcvrMIBNotifications 1.3.6.1.4.1.6141.2.60.4.2.0
             wwpLeosPortXcvrLinkStateChangeNotification 1.3.6.1.4.1.6141.2.60.4.2.0.4
A wwpLeosPortXcvrLinkStateChangeNotification is sent if the Xcvr state has changed.
             wwpLeosPortXcvrErrorTypeNotification 1.3.6.1.4.1.6141.2.60.4.2.0.5
A wwpLeosPortXcvrErrorTypeNotification is sent if the Xcvr is detected faulted because of some reason. Reason of failure is specified by wwpLeosPortXcvrErrorType.
             wwpLeosPortXcvrTempHighNotification 1.3.6.1.4.1.6141.2.60.4.2.0.6
A wwpLeosPortXcvrTempHighNotification is sent if the Xcvr temperature exceeds the threshold.
             wwpLeosPortXcvrTempLowNotification 1.3.6.1.4.1.6141.2.60.4.2.0.7
A wwpLeosPortXcvrTempLowNotification is sent if the Xcvr temperature decreases the threshold.
             wwpLeosPortXcvrTempNormalNotification 1.3.6.1.4.1.6141.2.60.4.2.0.8
A wwpLeosPortXcvrTempNormalNotification is sent if the Xcvr temperature returns back to normal state.
             wwpLeosPortXcvrVoltageHighNotification 1.3.6.1.4.1.6141.2.60.4.2.0.9
A wwpLeosPortXcvrVoltageHighNotification is sent if the Xcvr voltage exceeds the threshold.
             wwpLeosPortXcvrVoltageLowNotification 1.3.6.1.4.1.6141.2.60.4.2.0.10
A wwpLeosPortXcvrVoltageLowNotification is sent if the Xcvr voltage decreases the threshold.
             wwpLeosPortXcvrVoltageNormalNotification 1.3.6.1.4.1.6141.2.60.4.2.0.11
A wwpLeosPortXcvrVoltageNormalNotification is sent if the Xcvr voltage returns back to normal state.
             wwpLeosPortXcvrBiasHighNotification 1.3.6.1.4.1.6141.2.60.4.2.0.12
A wwpLeosPortXcvrBiasHighNotification is sent if the Xcvr Bias exceeds the threshold.
             wwpLeosPortXcvrBiasLowNotification 1.3.6.1.4.1.6141.2.60.4.2.0.13
A wwpLeosPortXcvrBiasLowNotification is sent if the Xcvr voltage decreases the threshold.
             wwpLeosPortXcvrBiasNormalNotification 1.3.6.1.4.1.6141.2.60.4.2.0.14
A wwpLeosPortXcvrBiasNormalNotification is sent if the Xcvr Bias returns back to normal state.
             wwpLeosPortXcvrTxPowerHighNotification 1.3.6.1.4.1.6141.2.60.4.2.0.15
A wwpLeosPortXcvrTxPowerHighNotification is sent if the Xcvr TxPower exceeds the threshold.
             wwpLeosPortXcvrTxPowerLowNotification 1.3.6.1.4.1.6141.2.60.4.2.0.16
A wwpLeosPortXcvrTxPowerLowNotification is sent if the Xcvr voltage decreases the threshold.
             wwpLeosPortXcvrTxPowerNormalNotification 1.3.6.1.4.1.6141.2.60.4.2.0.17
A wwpLeosPortXcvrTxPowerNormalNotification is sent if the Xcvr TxPower returns back to normal state.
             wwpLeosPortXcvrRxPowerHighNotification 1.3.6.1.4.1.6141.2.60.4.2.0.18
A wwpLeosPortXcvrRxPowerHighNotification is sent if the Xcvr RxPower exceeds the threshold.
             wwpLeosPortXcvrRxPowerLowNotification 1.3.6.1.4.1.6141.2.60.4.2.0.19
A wwpLeosPortXcvrRxPowerLowNotification is sent if the Xcvr voltage decreases the threshold.
             wwpLeosPortXcvrRxPowerNormalNotification 1.3.6.1.4.1.6141.2.60.4.2.0.20
A wwpLeosPortXcvrRxPowerNormalNotification is sent if the Xcvr RxPower returns back to normal state.
             wwpLeosPortXcvrSpeedInfoMissingNotification 1.3.6.1.4.1.6141.2.60.4.2.0.21
A wwpLeosPortXcvrSpeedInfoMissingNotification is sent if the Xcvr speed information is not found.
             wwpLeosPortXcvrBiasHighWarningNotification 1.3.6.1.4.1.6141.2.60.4.2.0.22
A wwpLeosPortXcvrBiasHighNotification is sent if the Xcvr Bias exceeds the warning threshold.
             wwpLeosPortXcvrBiasLowWarningNotification 1.3.6.1.4.1.6141.2.60.4.2.0.23
A wwpLeosPortXcvrBiasLowNotification is sent if the Xcvr voltage decreases below the warning threshold.
             wwpLeosPortXcvrTempHighWarningNotification 1.3.6.1.4.1.6141.2.60.4.2.0.24
A wwpLeosPortXcvrTempHighNotification is sent if the Xcvr temperature exceeds the warning threshold.
             wwpLeosPortXcvrTempLowWarningNotification 1.3.6.1.4.1.6141.2.60.4.2.0.25
A wwpLeosPortXcvrTempLowNotification is sent if the Xcvr temperature decreases below the warning threshold.
             wwpLeosPortXcvrVoltageHighWarningNotification 1.3.6.1.4.1.6141.2.60.4.2.0.26
A wwpLeosPortXcvrVoltageHighNotification is sent if the Xcvr voltage exceeds the warning threshold.
             wwpLeosPortXcvrVoltageLowWarningNotification 1.3.6.1.4.1.6141.2.60.4.2.0.27
A wwpLeosPortXcvrVoltageLowNotification is sent if the Xcvr voltage decreases below the warning threshold.
             wwpLeosPortXcvrTxPowerHighWarningNotification 1.3.6.1.4.1.6141.2.60.4.2.0.28
A wwpLeosPortXcvrTxPowerHighNotification is sent if the Xcvr TxPower exceeds the warning threshold.
             wwpLeosPortXcvrTxPowerLowWarningNotification 1.3.6.1.4.1.6141.2.60.4.2.0.29
A wwpLeosPortXcvrTxPowerLowNotification is sent if the Xcvr TxPower decreases below the warning threshold.
             wwpLeosPortXcvrRxPowerHighWarningNotification 1.3.6.1.4.1.6141.2.60.4.2.0.30
A wwpLeosPortXcvrRxPowerHighNotification is sent if the Xcvr RxPower exceeds the warning threshold.
             wwpLeosPortXcvrRxPowerLowWarningNotification 1.3.6.1.4.1.6141.2.60.4.2.0.31
A wwpLeosPortXcvrRxPowerLowNotification is sent if the Xcvr RxPower decreases below the warning threshold.
     wwpLeosPortXcvrMIBConformance 1.3.6.1.4.1.6141.2.60.4.3
         wwpLeosPortXcvrMIBCompliances 1.3.6.1.4.1.6141.2.60.4.3.1
         wwpLeosPortXcvrMIBGroups 1.3.6.1.4.1.6141.2.60.4.3.2