WS-INFRA-CLUSTER-MIB: View SNMP OID List / Download MIB

VENDOR: SYMBOL TECHNOLOGIES


 Home MIB: WS-INFRA-CLUSTER-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wsInfraClusterMIB 1.3.6.1.4.1.388.14.1.8.1
The Cluster module is responsible for providing a minimal interrupted service to the network in the case of a switch failure by making the other standby switch take over the un-adopted Access ports. The core functionalities of the Cluster module are as listed below: - Manage and process automatic port adoption by switch(es) in the event of network or any switch failure. - Manage the cluster license. - Act as a tunnel between the application modules of CC across the switches. All Cluster related configuration parameters (except of course wsInfraClusterEnable itself) can be modified only if Cluster Protocol is disabled.
     wsInfraClusterSwitchIP 1.3.6.1.4.1.388.14.1.8.1.1 ipaddress read-write
The IP Address of the switch in the cluster context.
     wsInfraClusterEnable 1.3.6.1.4.1.388.14.1.8.1.2 integer read-write
Enable or disable the Cluster feature. Enumeration: 'enable': 1, 'disable': 2.
     wsInfraClusterMode 1.3.6.1.4.1.388.14.1.8.1.3 integer read-write
Set the mode to either Active or Standby. This object can not be set when Cluster feature is enabled. Disable the Cluster feature using wsInfraClusterEnable before setting this object. Enumeration: 'active': 1, 'standby': 2.
     wsInfraClusterId 1.3.6.1.4.1.388.14.1.8.1.4 unsigned32 read-write
Cluster/Group id. This object can not be set when Cluster feature is enabled. Disable the Cluster feature using wsInfraClusterEnable before setting this object.
     wsInfraClusterDiscoveryInterval 1.3.6.1.4.1.388.14.1.8.1.5 unsigned32 read-write
During this time switches try to discover other switches in the cluster. This object can not be set when Cluster feature is enabled. Disable the Cluster feature using wsInfraClusterEnable before setting this object.
     wsInfraClusterHoldInterval 1.3.6.1.4.1.388.14.1.8.1.6 unsigned32 read-write
Time to announce that the neighbour switch is down if no heartbeats received during this period of time. This object can not be set when Cluster feature is enabled. Disable the Cluster feature using wsInfraClusterEnable before setting this object.
     wsInfraClusterHBInterval 1.3.6.1.4.1.388.14.1.8.1.7 unsigned32 read-write
The frequency in which heartbeats are sent. This object can not be set when Cluster feature is enabled. Disable the Cluster feature using wsInfraClusterEnable before setting this object.
     wsInfraClusterHandleSTP 1.3.6.1.4.1.388.14.1.8.1.8 integer read-write
Whether the STP convergence time needs to be handled or not. Enumeration: 'false': 2, 'true': 1.
     wsInfraClusterSwitchState 1.3.6.1.4.1.388.14.1.8.1.9 integer read-only
The current state of the switch in the cluster. Enumeration: 'disabled': 1, 'online': 4, 'startup': 2, 'discovery': 3.
     wsInfraClusterLicNum 1.3.6.1.4.1.388.14.1.8.1.10 unsigned32 read-only
The cluster license number.
     wsInfraClusterInstalledLicNum 1.3.6.1.4.1.388.14.1.8.1.11 unsigned32 read-only
Installed license number of the switch.
     wsInfraClusterApCnt 1.3.6.1.4.1.388.14.1.8.1.12 unsigned32 read-only
Total number of APs adopted in the cluster by all the switches.
     wsInfraClusterVersion 1.3.6.1.4.1.388.14.1.8.1.13 displaystring read-only
The version of the Cluster Module.
     wsInfraClusterHistory 1.3.6.1.4.1.388.14.1.8.1.14
           wsInfraClusterHistoryTable 1.3.6.1.4.1.388.14.1.8.1.14.1 no-access
List of history entries for the state changes of the switch.
               wsInfraClusterHistoryEntry 1.3.6.1.4.1.388.14.1.8.1.14.1.1 no-access
Defines an entry in the wsInfraClusterHistoryTable.
                   wsInfraClusterHistoryIndex 1.3.6.1.4.1.388.14.1.8.1.14.1.1.1 unsigned32 no-access
Simple Index.
                   wsInfraClusterHistoryState 1.3.6.1.4.1.388.14.1.8.1.14.1.1.2 integer read-only
Switch states. Enumeration: 'disabled': 1, 'online': 4, 'startup': 2, 'discovery': 3.
                   wsInfraClusterHistoryTime 1.3.6.1.4.1.388.14.1.8.1.14.1.1.3 dateandtime read-only
The time at which state change happened.
                   wsInfraClusterHistoryEventTrigger 1.3.6.1.4.1.388.14.1.8.1.14.1.1.4 integer read-only
The event that triggered the state change. Enumeration: 'discoveryDone': 4, 'enable': 1, 'startupDone': 3, 'disable': 2.
                   wsInfraClusterHistoryDesc 1.3.6.1.4.1.388.14.1.8.1.14.1.1.5 displaystring read-only
Description of the event and state change reason.
     wsInfraClusterConfig 1.3.6.1.4.1.388.14.1.8.1.15
           wsInfraClusterConfigTable 1.3.6.1.4.1.388.14.1.8.1.15.1 no-access
This table is used to configure the IP address of the switches in the cluster including this switch. It can be modified only if Cluster Protocol is disabled i.e. when wsInfraClusterEnable is set to 'disable'.
               wsInfraClusterConfigEntry 1.3.6.1.4.1.388.14.1.8.1.15.1.1 no-access
Defines an entry in the wsInfraClusterConfigTable.
                   wsInfraClusterConfigIndex 1.3.6.1.4.1.388.14.1.8.1.15.1.1.1 integer read-only
Description.
                   wsInfraClusterMemberIpAddr 1.3.6.1.4.1.388.14.1.8.1.15.1.1.2 ipaddress read-only
Unique IP address of the switch.
                   wsInfraClusterCfgRowStatus 1.3.6.1.4.1.388.14.1.8.1.15.1.1.3 rowstatus read-only
SNMP row status about the configured object. The row creation fails with error status as 'Bad Value' if the Cluster Config Table already contains the max number of peers specified by the Cluster Protocol Specification.
                   wsInfraClustertNumHBSent 1.3.6.1.4.1.388.14.1.8.1.15.1.1.4 unsigned32 read-only
The number of HeartBeats sent from this switch to a peer switch in the cluster.
                   wsInfraClusterNumHBRcvd 1.3.6.1.4.1.388.14.1.8.1.15.1.1.5 unsigned32 read-only
The number of HeartBeats received from the peer switch in the cluster.
                   wsInfraClusterLastSeen 1.3.6.1.4.1.388.14.1.8.1.15.1.1.6 dateandtime read-only
The time at which the last heartbeat received from the peer switch.
                   wsInfraClusterFirstSeen 1.3.6.1.4.1.388.14.1.8.1.15.1.1.7 dateandtime read-only
The time at which the peer switch was first seen.
                   wsInfraClusterNumUpdMesgSent 1.3.6.1.4.1.388.14.1.8.1.15.1.1.8 unsigned32 read-only
The number of Update Messages sent from this switch to a peer switch in the cluster.
                   wsInfraClusterNumUpdMesgRecd 1.3.6.1.4.1.388.14.1.8.1.15.1.1.9 unsigned32 read-only
The number of Update Messages received from the peer switch in the cluster.
                   wsInfraClusterStatus 1.3.6.1.4.1.388.14.1.8.1.15.1.1.10 integer read-only
The status of the peer switch. Enumeration: 'peerSeen': 3, 'peerConfigured': 1, 'peerNotSeen': 4, 'peerInvalid': 2, 'peerEstablished': 5.
                   wsInfraClusterAdoptionCnt 1.3.6.1.4.1.388.14.1.8.1.15.1.1.11 unsigned32 read-only
Number of APs adopted by the peer switch in cluster.
                   wsInfraClusterSwitchMode 1.3.6.1.4.1.388.14.1.8.1.15.1.1.12 integer read-only
Whether the Peer Switch's mode is primary or standby. Enumeration: 'active': 1, 'standby': 2.
                   wsInfraClusterInstalLicValue 1.3.6.1.4.1.388.14.1.8.1.15.1.1.13 unsigned32 read-only
The value of the Installed License of the peer switch.
                   wsInfraClusterUptime 1.3.6.1.4.1.388.14.1.8.1.15.1.1.14 dateandtime read-only
Uptime of member switch
                   wsInfraClusterNumMusAdopted 1.3.6.1.4.1.388.14.1.8.1.15.1.1.15 unsigned32 read-only
Number of MUs adopted by the member switch
                   wsInfraClusterNumRadiosAdopted 1.3.6.1.4.1.388.14.1.8.1.15.1.1.16 unsigned32 read-only
Number of radios adopted by the member switch
                   wsInfraClusterNumSelfHealingRadios 1.3.6.1.4.1.388.14.1.8.1.15.1.1.17 unsigned32 read-only
Number of radios in self healing mode in the member switch
                   wsInfraClusterNumRogueAps 1.3.6.1.4.1.388.14.1.8.1.15.1.1.18 unsigned32 read-only
Number of rogue APs detected by the member switch
                   wsInfraClusterCfgRunningImgVer 1.3.6.1.4.1.388.14.1.8.1.15.1.1.19 displaystring read-only
Version of the running image on the member switch
                   wsInfraClusterCfgPortAdoptionCapacity 1.3.6.1.4.1.388.14.1.8.1.15.1.1.20 unsigned32 read-only
Port adoption capacity of the member switch
           wsInfraClusterPeerStatTable 1.3.6.1.4.1.388.14.1.8.1.15.2 no-access
Statistics about different switches in the cluster.
               wsInfraClusterPeerStatEntry 1.3.6.1.4.1.388.14.1.8.1.15.2.1 no-access
Defines an entry in the wsInfraClusterPeerStatTable.
                   wsInfraClusterStatNumHBSent 1.3.6.1.4.1.388.14.1.8.1.15.2.1.1 unsigned32 read-only
The number of HeartBeats sent from this switch to a peer switch in the cluster.
     wsInfraClusterUpAndFullyConnected 1.3.6.1.4.1.388.14.1.8.1.16 integer read-only
Indicates if cluster is up and fully connected Enumeration: 'yes': 2, 'no': 1.
     wsInfraClusterTotalApsAdopted 1.3.6.1.4.1.388.14.1.8.1.17 integer32 read-only
Total number of APs adopted by the cluster
     wsInfraClusterTotalRadiosAdopted 1.3.6.1.4.1.388.14.1.8.1.18 integer32 read-only
Total number of radios adopted by the cluster
     wsInfraClusterTotalMusAssociated 1.3.6.1.4.1.388.14.1.8.1.19 integer32 read-only
Total number of MUs adopted by the cluster
     wsInfraClusterTotalRogueAps 1.3.6.1.4.1.388.14.1.8.1.20 integer32 read-only
Total number of rogue APs detected by the cluster
     wsInfraClusterTotalPortAdoptionCapacity 1.3.6.1.4.1.388.14.1.8.1.21 integer32 read-only
Total port adoption capacity of the cluster
     wsInfraClusterTotalSelfHealingRadios 1.3.6.1.4.1.388.14.1.8.1.22 integer32 read-only
Total number of radios in self healing mode in the cluster
     wsInfraClusterMusAdoptedCnt 1.3.6.1.4.1.388.14.1.8.1.23 integer32 read-only
Number of MUs adopted by the switch
     wsInfraClusterRadiosAdoptedCnt 1.3.6.1.4.1.388.14.1.8.1.24 integer32 read-only
Number of radios adopted by the switch
     wsInfraClusterSelfHealingRadioCnt 1.3.6.1.4.1.388.14.1.8.1.25 integer32 read-only
Number of radios in self healing mode in the switch
     wsInfraClusterRogueApCnt 1.3.6.1.4.1.388.14.1.8.1.26 integer32 read-only
Number of rogue APs detected by the switch
     wsInfraClusterRunningImgVer 1.3.6.1.4.1.388.14.1.8.1.27 displaystring read-only
Version of the running image on the switch
     wsInfraClusterPortAdoptionCapacity 1.3.6.1.4.1.388.14.1.8.1.28 integer32 read-only
Port adoption capacity of the switch
     wsInfraClusterAutoRevert 1.3.6.1.4.1.388.14.1.8.1.29 integer read-write
Enable or disable automatic revert. This object can not be set when Cluster feature is enabled. Disable the Cluster feature using wsInfraClusterEnable before setting this object. Enumeration: 'enable': 1, 'disable': 2.
     wsInfraClusterAutoRevertDelay 1.3.6.1.4.1.388.14.1.8.1.30 unsigned32 read-write
Auto-revert delay (in minutes - ranging from 1 to 1800). This object can not be set when Cluster feature is enabled. Disable the Cluster feature using wsInfraClusterEnable before setting this object.
     wsInfraClusterManualRevert 1.3.6.1.4.1.388.14.1.8.1.31 integer read-write
Set manual revert Enumeration: 'manualRevertNow': 1.
     wsInfraClusterDhcpRedundancy 1.3.6.1.4.1.388.14.1.8.1.32 integer read-write
Enable or disable the DHCP redundancy feature. This object can not be set when Cluster feature is enabled. Disable the Cluster feature using wsInfraClusterEnable before setting this object. Enumeration: 'enable': 1, 'disable': 2.
     wsInfraClusterActiveDhcpServerSwitch 1.3.6.1.4.1.388.14.1.8.1.33 displaystring read-only
IP address of the switch running the active DHCP server. Other values this field could take are: NotApplicable - when redundancy is disabled. Unknown - when at any given time if there is no active DHCP server switch or the current switch is not participating in DHCP redundancy.
     wsInfraClusterResetActiveDhcpServer 1.3.6.1.4.1.388.14.1.8.1.34 integer read-write
Reset the active DHCP server. If the current switch is running active DHCP server, then the DHCP server will be reset. Otherwise, this action will be ignored. Enumeration: 'resetActiveDhcpServer': 1.
     wsInfraCriticalResourceIp 1.3.6.1.4.1.388.14.1.8.1.35 ipaddress read-write
IP address of the Critical Resource for the cluster switches. This object can not be set when Cluster feature is enabled. Disable the Cluster feature using wsInfraClusterEnable before setting this object.
     wsInfraClusterDynApLoadBal 1.3.6.1.4.1.388.14.1.8.1.36
           wsInfraClusterDynApLoadBalEnable 1.3.6.1.4.1.388.14.1.8.1.36.1 truthvalue read-write
Enable or disable dynamic AP load balance feature. Default is disabled.
           wsInfraClusterDynApLoadBalApproach 1.3.6.1.4.1.388.14.1.8.1.36.2 integer read-write
This determines whether to the trigger dynamic AP load balance on scheduled time or immediately when AP imbalance is detected. Enumeration: 'runtime': 2, 'schedule': 1.
           wsInfraClusterDynApLoadBalSched 1.3.6.1.4.1.388.14.1.8.1.36.3
               wsInfraClusterDynApLoadBalSchedStartTime 1.3.6.1.4.1.388.14.1.8.1.36.3.1 dateandtime read-write
If trigger for dynamic AP load balance is scheduled time then this configuration parameter determines the start time to initiate dynamic AP load balance.
               wsInfraClusterDynApLoadBalSchedInterval 1.3.6.1.4.1.388.14.1.8.1.36.3.2 unsigned32 read-write
If trigger for dynamic AP load balance is scheduled time then this configuration parameter determines the interval or frequency at which dynamic AP load balance will be triggered. Default value is 1 day.
           wsInfraClusterDynApLoadBalStart 1.3.6.1.4.1.388.14.1.8.1.36.4 doactionnow read-write
Command to initiate dynamic AP load balance.
           wsInfraClusterDynApLoadBalMUThrshld 1.3.6.1.4.1.388.14.1.8.1.36.5 integer read-write
This specifies per AP MU threshold value. If AP associated MU count is equal to or greater than this threshold value then AP will not be reset. It also depends on trigger for dynamic AP load balance. Default value is 32 MUs.
     wsInfraClusterLicensingAlgorithm 1.3.6.1.4.1.388.14.1.8.1.37 integer read-write
Set the redundancy licensing algorithm to either Max or Aggregation. This object can not be set when Redundancy feature is enabled. Disable the Redundancy feature using wsInfraClusterEnable before setting this object. Enumeration: 'max': 1, 'aggregation': 2.
     wsInfrastructureMIBConformance 1.3.6.1.4.1.388.14.1.8.1.100
             wsInfrastructureMIBCompliances 1.3.6.1.4.1.388.14.1.8.1.100.1
                 wsInfrastructureMIBCompliance 1.3.6.1.4.1.388.14.1.8.1.100.1.1
Description.
             wsInfrastructureMIBGroups 1.3.6.1.4.1.388.14.1.8.1.100.2
                 wsInfrastructureMIBGroup 1.3.6.1.4.1.388.14.1.8.1.100.2.1
Description.
                 wsInfrastructureMIBObsoleteGroup 1.3.6.1.4.1.388.14.1.8.1.100.2.2
Description.