WLSX-SWITCH-MIB: View SNMP OID List / Download MIB

VENDOR: ARUBA


 Home MIB: WLSX-SWITCH-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, ARUBA-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wlsxSwitchMIB 1.3.6.1.4.1.14823.2.2.1.1
This MIB module defines MIB objects which provide System level information about the Aruba switches.
     wlsxSystemXGroup 1.3.6.1.4.1.14823.2.2.1.1.1
         wlsxHostname 1.3.6.1.4.1.14823.2.2.1.1.1.1 displaystring read-only
Name of the switch.
         wlsxModelName 1.3.6.1.4.1.14823.2.2.1.1.1.2 displaystring read-only
Model Name of the switch.
         wlsxSwitchIp 1.3.6.1.4.1.14823.2.2.1.1.1.3 ipaddress read-only
Switch IP as configured by the user. This IP address uniquely identifies the switch.
         wlsxSwitchRole 1.3.6.1.4.1.14823.2.2.1.1.1.4 integer read-only
Role of this switch in the Switch Domain. Enumeration: 'local': 2, 'standbymaster': 3, 'master': 1.
         wlsxSwitchMasterIp 1.3.6.1.4.1.14823.2.2.1.1.1.5 ipaddress read-only
Master IP of the switch
         wlsxSwitchListTable 1.3.6.1.4.1.14823.2.2.1.1.1.6 no-access
This Table will list all the switches in the Switch Domain. It will be populated only on the master switch. Local switches return empty table.
             wlsxSwitchListEntry 1.3.6.1.4.1.14823.2.2.1.1.1.6.1 no-access
Switch List Entry
                 switchListSwitchIPAddress 1.3.6.1.4.1.14823.2.2.1.1.1.6.1.1 ipaddress no-access
IP Address of the switch.
                 switchListSwitchRole 1.3.6.1.4.1.14823.2.2.1.1.1.6.1.2 integer read-only
Role of the Switch. Enumeration: 'local': 2, 'standbymaster': 3, 'master': 1.
         wlsxSwitchLicenseCount 1.3.6.1.4.1.14823.2.2.1.1.1.7 integer32 read-only
The number of licenses installed on the switch
         wlsxSwitchLicenseTable 1.3.6.1.4.1.14823.2.2.1.1.1.8 no-access
This table lists all licenses installed on the switch.
             wlsxLicenseEntry 1.3.6.1.4.1.14823.2.2.1.1.1.8.1 no-access
License Entry
                 licenseIndex 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.1 integer32 no-access
License ID number
                 licenseKey 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.2 displaystring read-only
License Key
                 licenseInstalled 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.3 displaystring read-only
License installation time
                 licenseExpires 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.4 displaystring read-only
License expiry time
                 licenseFlags 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.5 displaystring read-only
License flags; E - enabled; A - auto-generated; R - reboot required to activate
                 licenseService 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.6 displaystring read-only
The service enabled by this license.
         wlsxSysXProcessorTable 1.3.6.1.4.1.14823.2.2.1.1.1.9 no-access
The table of processors contained by the switch.
             wlsxSysXProcessorEntry 1.3.6.1.4.1.14823.2.2.1.1.1.9.1 no-access
An entry for one processor contained by the switch.
                 sysXProcessorID 1.3.6.1.4.1.14823.2.2.1.1.1.9.1.1 integer32 no-access
Processor Index.
                 sysXProcessorDescr 1.3.6.1.4.1.14823.2.2.1.1.1.9.1.2 displaystring read-only
description of the processor.
                 sysXProcessorLoad 1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3 integer32 read-only
The average, over the last minute, of the percentage of time that this processor was not idle.
         wlsxSysXStorageTable 1.3.6.1.4.1.14823.2.2.1.1.1.10 no-access
The table of Storage-devices contained by the switch.
               wlsxSysXStorageEntry 1.3.6.1.4.1.14823.2.2.1.1.1.10.1 no-access
An entry for one long-term storage device contained by the switch.
                   sysXStorageIndex 1.3.6.1.4.1.14823.2.2.1.1.1.10.1.1 integer32 no-access
                   sysXStorageType 1.3.6.1.4.1.14823.2.2.1.1.1.10.1.2 integer read-only
Enumeration: 'ram': 1, 'flashMemory': 2.
                   sysXStorageSize 1.3.6.1.4.1.14823.2.2.1.1.1.10.1.3 integer32 read-only
size of the storage filesystem in MB.
                   sysXStorageUsed 1.3.6.1.4.1.14823.2.2.1.1.1.10.1.4 integer32 read-only
size of the storage filesystem in MB.
                   sysXStorageName 1.3.6.1.4.1.14823.2.2.1.1.1.10.1.5 displaystring read-only
name of the storage filesystem.
         wlsxSysXMemoryTable 1.3.6.1.4.1.14823.2.2.1.1.1.11 no-access
The memory status of the switch
               wlsxSysXMemoryEntry 1.3.6.1.4.1.14823.2.2.1.1.1.11.1 no-access
An entry for one memory region on the switch. Currently, only the CP region is monitored.
                   sysXMemoryIndex 1.3.6.1.4.1.14823.2.2.1.1.1.11.1.1 integer32 no-access
                   sysXMemorySize 1.3.6.1.4.1.14823.2.2.1.1.1.11.1.2 integer32 read-only
Total memory in KB.
                   sysXMemoryUsed 1.3.6.1.4.1.14823.2.2.1.1.1.11.1.3 integer32 read-only
Used memory in KB.
                   sysXMemoryFree 1.3.6.1.4.1.14823.2.2.1.1.1.11.1.4 integer32 read-only
Free memory in KB.
         wlsxSwitchLicenseSerialNumber 1.3.6.1.4.1.14823.2.2.1.1.1.12 displaystring read-only
The license serial number of the switch
     wlsxUserInfoGroup 1.3.6.1.4.1.14823.2.2.1.1.2
         wlsxSwitchUserTable 1.3.6.1.4.1.14823.2.2.1.1.2.1 no-access
This Table lists all the users (both wired and wireless) currently connected to the switch. Users are identified by their IP address.
             wlsxSwitchUserEntry 1.3.6.1.4.1.14823.2.2.1.1.2.1.1 no-access
User Entry
                 userIpAddress 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.1 ipaddress no-access
IP Address from which the user connected to the switch.
                 userPhyAddress 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.2 macaddress read-only
Physical Address of the station from which the user connected to the switch.
                 userName 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.3 displaystring read-only
Name of the User.
                 userRole 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.4 displaystring read-only
The Role configured for this user.
                 userUpTime 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.5 timeticks read-only
Time since the user is connected to the switch.
                 userAuthenticationMethod 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.6 integer read-only
Authentication mechanism used by the user to connect to the switch. Enumeration: 'web': 3, 'none': 1, 'dot1x': 4, 'mac': 6, 'other': 2, 'vpn': 5.
                 userLocation 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.7 displaystring read-only
Location of the access point (in Building.Floor.... format), which the user used to connect to the switch.
                 userServerName 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.8 displaystring read-only
Name of the Back-end authentication server, used to authenticate the user.
                 userConnectedVlan 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.9 integer32 read-only
Vlan on which the user is connected to the switch.
                 userConnectedSlot 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.10 integer32 read-only
Slot on switch, where the user connection terminates.
                 userConnectedPort 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.11 integer32 read-only
Port on switch, where the user connection terminates.
                 userBWContractName 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.12 displaystring read-only
Name of the Bandwidth Contract applied to this user.
                 userBWContractUsage 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.13 integer read-only
Indicates how the Bandwidth Contract is used. Enumeration: 'shared': 2, 'user': 1.
                 userConnectedModule 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.14 integer32 read-only
The module to which the user is connected, if wired.
         wlsxSwitchStationMgmtTable 1.3.6.1.4.1.14823.2.2.1.1.2.2 no-access
This Table lists all the wireless stations associated with the Access points connected to this switch.
             wlsxSwitchStationMgmtEntry 1.3.6.1.4.1.14823.2.2.1.1.2.2.1 no-access
Station Management Entry
                 staPhyAddress 1.3.6.1.4.1.14823.2.2.1.1.2.2.1.1 macaddress no-access
The Physical Address of the Station.
                 staAccessPointBSSID 1.3.6.1.4.1.14823.2.2.1.1.2.2.1.2 macaddress no-access
BSSID of the Access point through which the station is connected to the switch
                 staUserName 1.3.6.1.4.1.14823.2.2.1.1.2.2.1.3 displaystring read-only
Name of the User connecting from this station.
                 staUserRole 1.3.6.1.4.1.14823.2.2.1.1.2.2.1.4 displaystring read-only
User Role.
                 staAssociationID 1.3.6.1.4.1.14823.2.2.1.1.2.2.1.5 unsigned32 read-only
AID with which the Station is associated with this system.
                 staAccessPointESSID 1.3.6.1.4.1.14823.2.2.1.1.2.2.1.6 displaystring read-only
ESSID of the Access point
                 staSignalToNoiseRatio 1.3.6.1.4.1.14823.2.2.1.1.2.2.1.7 integer32 read-only
SNR for the BSSID.
                 staTransmitRate 1.3.6.1.4.1.14823.2.2.1.1.2.2.1.8 integer read-only
Indicates Transmit rate of the channel Enumeration: 'rate24Mbps': 9, 'rate18Mbps': 8, 'rate1Mbps': 1, 'rate5point5Mbps': 3, 'rate11Mbps': 6, 'rate48Mbps': 11, 'rate9Mbps': 5, 'rate36Mbps': 10, 'rate54Mbps': 12, 'rate6Mbps': 4, 'rate2Mbps': 2, 'rate12Mbps': 7.
                 staReceiveRate 1.3.6.1.4.1.14823.2.2.1.1.2.2.1.9 integer read-only
Indicates Receive rate of the channel Enumeration: 'rate24Mbps': 9, 'rate18Mbps': 8, 'rate1Mbps': 1, 'rate5point5Mbps': 3, 'rate11Mbps': 6, 'rate48Mbps': 11, 'rate9Mbps': 5, 'rate36Mbps': 10, 'rate54Mbps': 12, 'rate6Mbps': 4, 'rate2Mbps': 2, 'rate12Mbps': 7.
         wlsxSwitchStationStatsTable 1.3.6.1.4.1.14823.2.2.1.1.2.3 no-access
This Table lists the statistics of all the wireless stations associated with the Access points connected to this switch.
             wlsxSwitchStationStatsEntry 1.3.6.1.4.1.14823.2.2.1.1.2.3.1 no-access
Station Statistics Entry
                 staTxPackets 1.3.6.1.4.1.14823.2.2.1.1.2.3.1.1 counter32 read-only
Total Packets Transmitted by the station.
                 staTxBytes 1.3.6.1.4.1.14823.2.2.1.1.2.3.1.2 counter32 read-only
Total Bytes Transmitted by the station.
                 staRxPackets 1.3.6.1.4.1.14823.2.2.1.1.2.3.1.3 counter32 read-only
Total Packets Received by the Station
                 staRxBytes 1.3.6.1.4.1.14823.2.2.1.1.2.3.1.4 counter32 read-only
Total Bytes Received by the station.
                 staBwRate 1.3.6.1.4.1.14823.2.2.1.1.2.3.1.5 integer32 read-only
Bandwidth Rate in Kbps of the station.
                 staFrameRetryRate 1.3.6.1.4.1.14823.2.2.1.1.2.3.1.6 integer32 read-only
Station Frame Retry Rate.
                 staFrameLowSpeedRate 1.3.6.1.4.1.14823.2.2.1.1.2.3.1.7 integer32 read-only
Station Frame Low Speed Rate.
                 staFrameNonUnicastRate 1.3.6.1.4.1.14823.2.2.1.1.2.3.1.8 integer32 read-only
Station Frame Non Unicast Packet Rate.
                 staFrameFragmentationRate 1.3.6.1.4.1.14823.2.2.1.1.2.3.1.9 integer32 read-only
Station Frame Fragmentation Rate.
                 staFrameReceiveErrorRate 1.3.6.1.4.1.14823.2.2.1.1.2.3.1.10 integer32 read-only
Station Frame Receive Error Rate.
     wlsxAccessPointInfoGroup 1.3.6.1.4.1.14823.2.2.1.1.3
         wlsxSwitchTotalNumAccessPoints 1.3.6.1.4.1.14823.2.2.1.1.3.1 unsigned32 read-only
Total Number of Access Points Connected to this switch.
         wlsxSwitchTotalNumStationsAssociated 1.3.6.1.4.1.14823.2.2.1.1.3.2 unsigned32 read-only
Total Number of Stations Associated to this switch.
         wlsxSwitchAccessPointTable 1.3.6.1.4.1.14823.2.2.1.1.3.3 no-access
This Table lists all the Access Points Connected to this switch.
             wlsxSwitchAccessPointEntry 1.3.6.1.4.1.14823.2.2.1.1.3.3.1 no-access
Station Management Entry
                 apBSSID 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.1 macaddress no-access
The Physical Address of the Access Point.
                 apESSID 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.2 displaystring read-only
ESSID of the Access Point
                 apSlot 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.3 unsigned32 read-only
Slot to which the Access Point is connected.
                 apPort 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.4 unsigned32 read-only
Port to which the Access Point is connected.
                 apIpAddress 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.5 ipaddress read-only
Address of the Access Point.
                 apPhyType 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.6 integer read-only
Physical Layer Protocol support of the AP. Enumeration: 'dot11g': 3, 'dot11b': 2, 'dot11a': 1.
                 apType 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.7 integer read-only
Indicates whether the Access point is an Air Monitor or regular AP. Enumeration: 'ap': 1, 'am': 2.
                 apCurrentChannel 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.8 integer read-only
The Current Operating frequency channel.
                 apLocation 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.9 displaystring read-only
Location of the AP defined in Building.Floor.... mode.
                 apTotalTime 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.10 timeticks read-only
Time since the Ap is connected to the switch
                 apInactiveTime 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.11 timeticks read-only
Time since the Ap has been inactive
                 apLoadBalancing 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.12 truthvalue read-only
Indicates whether Load balancing is enabled or not.
                 apChannelNoise 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.13 integer32 read-only
Indicates the noise on the channel
                 apSignalToNoiseRatio 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.14 integer32 read-only
SNR for the BSSID.
                 apTransmitRate 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.15 integer read-only
Indicates Transmit rate of the channel Enumeration: 'rate24Mbps': 9, 'rate18Mbps': 8, 'rate1Mbps': 1, 'rate5point5Mbps': 3, 'rate11Mbps': 6, 'rate48Mbps': 11, 'rate9Mbps': 5, 'rate36Mbps': 10, 'rate54Mbps': 12, 'rate6Mbps': 4, 'rate2Mbps': 2, 'rate12Mbps': 7.
                 apReceiveRate 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.16 integer read-only
Indicates Receive rate of the channel Enumeration: 'rate24Mbps': 9, 'rate18Mbps': 8, 'rate1Mbps': 1, 'rate5point5Mbps': 3, 'rate11Mbps': 6, 'rate48Mbps': 11, 'rate9Mbps': 5, 'rate36Mbps': 10, 'rate54Mbps': 12, 'rate6Mbps': 4, 'rate2Mbps': 2, 'rate12Mbps': 7.
         wlsxSwitchGlobalAPTable 1.3.6.1.4.1.14823.2.2.1.1.3.4 no-access
This Table lists all the Access Points Connected in the Switch Domain. This table is valid only on a Master switch. On a Local switch, the table is empty.
             wlsxSwitchGlobalAPEntry 1.3.6.1.4.1.14823.2.2.1.1.3.4.1 no-access
Station Management Entry
                 globalAPLocation 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.1 displaystring no-access
Physical Location of the AP, defined in Building.Floor.Location format.
                 globalAPAddress 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.2 ipaddress no-access
Address of the Access Point.
                 globalAPLocalSwitch 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.3 ipaddress read-only
IP Address of the Local Switch this Access Point is connected to.
                 globalAPdot11aPhyAddr 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.4 macaddress read-only
Physical Mac address of the module supporting dot11a in the Access Point. AP can have support for both dot11a and dot11b physical layer.
                 globalAPdot11bPhyAddr 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.5 macaddress read-only
Physical Mac address of the module supporting dot11b in the Access Point. AP can have support for both dot11a and dot11b physical layer.
                 globalAPState 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.6 integer read-only
State of the AP. 1 -- AP is UP. 2 -- AP is DOWN. 3-7 -- Values are deprecated.
                 globalAPdot11gPhyAddr 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.7 macaddress read-only
Physical Mac address of the module supporting dot11g in the Access Point. AP can have support for both a,b,g physical layer.
         wlsxSwitchAccessPointStatsTable 1.3.6.1.4.1.14823.2.2.1.1.3.5 no-access
This Table lists the statistics of all the Access Points Connected to this switch.
             wlsxSwitchAccessPointStatsEntry 1.3.6.1.4.1.14823.2.2.1.1.3.5.1 no-access
Ap Stats Entry.
                 apStatsChannel 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.1 integer read-only
Channel on which the ap is operating.
                 apChannelBwRate 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.2 integer32 read-only
Bandwidth Rate in Kbps of the apChannel.
                 apChannelFrameRetryRate 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.3 integer32 read-only
Ap Channel Frame Retry Rate.
                 apChannelFrameLowSpeedRate 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.4 integer32 read-only
Ap Channel Frame Low Speed Rate.
                 apChannelFrameNonUnicastRate 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.5 integer32 read-only
Ap Channel Frame Non Unicast Packet Rate.
                 apChannelFrameFragmentationRate 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.6 integer32 read-only
Ap Channel Frame Fragmentation Rate.
                 apChannelFrameReceiveErrorRate 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.7 integer32 read-only
Ap Channel Frame Receive Error Rate.
                 apBSSTxPackets 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.8 counter32 read-only
Total Packets Transmitted by the ap on this BSSID.
                 apBSSTxBytes 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.9 counter32 read-only
Total Bytes Transmitted by the ap on this BSSID.
                 apBSSRxPackets 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.10 counter32 read-only
Total Packets Received by the ap on this BSSID
                 apBSSRxBytes 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.11 counter32 read-only
Total Bytes Received by the ap on this BSSID.
                 apBSSBwRate 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.12 integer32 read-only
Bandwidth Rate in Kbps of the ap on this BSSID.
                 apBSSFrameRetryRate 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.13 integer32 read-only
Frame Retry Rate on this BSSID.
                 apBSSFrameLowSpeedRate 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.14 integer32 read-only
Frame Low Speed Rate on this BSSID.
                 apBSSFrameNonUnicastRate 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.15 integer32 read-only
Frame Non Unicast Packet Rate on this BSSID.
                 apBSSFrameFragmentationRate 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.16 integer32 read-only
Frame Fragmentation Rate on this BSSID.
                 apBSSFrameReceiveErrorRate 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.17 integer32 read-only
Frame Receive Error Rate on this BSSID.
     wlsxSwitchTraps 1.3.6.1.4.1.14823.2.2.1.1.100
             wlsxSwitchTrapObjectsGroup 1.3.6.1.4.1.14823.2.2.1.1.100.100
                     wlsxAuthServerName 1.3.6.1.4.1.14823.2.2.1.1.100.100.1 displaystring read-only
This Object is used in the traps to indicate the Authentication Server, used for Authentication.
                     wlsxAuthServerTimeout 1.3.6.1.4.1.14823.2.2.1.1.100.100.2 integer32 read-only
This Object is used in the traps to indicate the Authentication Server Timeout.
                     wlsxFanNumber 1.3.6.1.4.1.14823.2.2.1.1.100.100.4 integer32 read-only
This Object is used in the traps to indicate a failing fan number.
                     wlsxLineCardNumber 1.3.6.1.4.1.14823.2.2.1.1.100.100.5 integer32 read-only
This Object is used in the traps to indicate a Line Card in the switch.
                     wlsxVoltageType 1.3.6.1.4.1.14823.2.2.1.1.100.100.6 displaystring read-only
This Object is used in the traps to indicate the type of the voltage.
                     wlsxVoltageValue 1.3.6.1.4.1.14823.2.2.1.1.100.100.7 displaystring read-only
This Object is used in the traps to indicate the voltage value in Float.
                     wlsxTemperatureValue 1.3.6.1.4.1.14823.2.2.1.1.100.100.8 displaystring read-only
This Object is used in the traps to indicate Temperature Value.
                     wlsxProcessName 1.3.6.1.4.1.14823.2.2.1.1.100.100.9 displaystring read-only
This Object is used in the traps to indicate a process name.
                     wlsxStationMacAddress 1.3.6.1.4.1.14823.2.2.1.1.100.100.10 macaddress read-only
The Physical Address of the Station.
                     wlsxStationBlackListReason 1.3.6.1.4.1.14823.2.2.1.1.100.100.11 integer read-only
The Reason for which a station is black listed. Enumeration: 'authFailure': 3, 'userDefined': 1, 'sessionBlacklist': 7, 'synFlood': 6, 'other': 100, 'sessionFlood': 5, 'pingFlood': 4, 'ipSpoofing': 8, 'mitmAttack': 2.
                     wlsxSpoofedIpAddress 1.3.6.1.4.1.14823.2.2.1.1.100.100.12 ipaddress read-only
This Object is used in a trap to identify a Spoofed IP Address.
                     wlsxSpoofedOldPhyAddress 1.3.6.1.4.1.14823.2.2.1.1.100.100.13 macaddress read-only
This Object is used in a trap to identify a Old Mac Address.
                     wlsxSpoofedNewPhyAddress 1.3.6.1.4.1.14823.2.2.1.1.100.100.14 macaddress read-only
This Object is used in a trap to identify a New Mac Address.
                     wlsxDBName 1.3.6.1.4.1.14823.2.2.1.1.100.100.15 displaystring read-only
This Object is used in a trap to identify name of the Database.
                     wlsxDBUserName 1.3.6.1.4.1.14823.2.2.1.1.100.100.16 displaystring read-only
This Object is used in a trap to identify name of the Database user.
                     wlsxDBIpAddress 1.3.6.1.4.1.14823.2.2.1.1.100.100.17 ipaddress read-only
This Object is used in a trap to identify the IpAddress of the DB.
                     wlsxDBType 1.3.6.1.4.1.14823.2.2.1.1.100.100.18 integer read-only
This Object is used in a trap to identify the Port of the user. Enumeration: 'mssql': 1, 'mysql': 2.
                     wlsxVrID 1.3.6.1.4.1.14823.2.2.1.1.100.100.19 integer32 read-only
This Object contains the Virtual Router Identifier.
                     wlsxVrMasterIp 1.3.6.1.4.1.14823.2.2.1.1.100.100.20 ipaddress read-only
This Object contains the Master IP address.
                     wlsxVrrpOperState 1.3.6.1.4.1.14823.2.2.1.1.100.100.21 integer read-only
This Object represents the VRRP operational state. Enumeration: 'initialize': 1, 'master': 3, 'backup': 2.
                     wlsxApTxPower 1.3.6.1.4.1.14823.2.2.1.1.100.100.22 integer32 read-only
This Object contains the value of the AP Transmit Power.
                     wlsxESIServerGrpName 1.3.6.1.4.1.14823.2.2.1.1.100.100.23 displaystring read-only
This Object represents the External Services Interface (ESI) Server Group name
                     wlsxESIServerName 1.3.6.1.4.1.14823.2.2.1.1.100.100.24 displaystring read-only
This Object represents the External Services Interface (ESI) Server name
                     wlsxESIServerIpaddress 1.3.6.1.4.1.14823.2.2.1.1.100.100.25 ipaddress read-only
This Object represents the External Services Interface (ESI) Server IP Address
                     wlsxLicenseDaysRemaining 1.3.6.1.4.1.14823.2.2.1.1.100.100.26 integer32 read-only
This Object represents number of the days remaining prior to a license expiry
                     wlsxSlotNumber 1.3.6.1.4.1.14823.2.2.1.1.100.100.27 integer32 read-only
This Object is used in the traps to indicate a Line Card in the switch. This value matches the value of sysExtCardSlot.
             wlsxSwitchIPChanged 1.3.6.1.4.1.14823.2.2.1.1.100.1001
A trap which indicates that the switch IP address has changed.
             wlsxSwitchRoleChange 1.3.6.1.4.1.14823.2.2.1.1.100.1002
A trap which indicates that the role of the switch has changed in the Domain.
             wlsxUserEntryCreated 1.3.6.1.4.1.14823.2.2.1.1.100.1003
A trap which indicates that a New user is created.
             wlsxUserEntryDeleted 1.3.6.1.4.1.14823.2.2.1.1.100.1004
A trap which indicates that a user is deleted.
             wlsxUserEntryAuthenticated 1.3.6.1.4.1.14823.2.2.1.1.100.1005
A trap which indicates that a user is Authenticated.
             wlsxUserEntryDeAuthenticated 1.3.6.1.4.1.14823.2.2.1.1.100.1006
A trap which indicates that a user is Deauthenticated.
             wlsxUserAuthenticationFailed 1.3.6.1.4.1.14823.2.2.1.1.100.1007
A trap which indicates that a user authentication has failed.
             wlsxAuthServerReqTimedOut 1.3.6.1.4.1.14823.2.2.1.1.100.1008
A trap which indicates that the authentication server request timed out.
             wlsxAuthServerTimedOut 1.3.6.1.4.1.14823.2.2.1.1.100.1009
A trap which indicates that the authentication server timed out.
             wlsxAuthServerIsUp 1.3.6.1.4.1.14823.2.2.1.1.100.1010
A trap which indicates that the authentication server is up.
             wlsxAuthMaxUserEntries 1.3.6.1.4.1.14823.2.2.1.1.100.1011
A trap which indicates that the User Entries table is full and cannot add any more entries.
             wlsxAuthMaxAclEntries 1.3.6.1.4.1.14823.2.2.1.1.100.1012
A trap which indicates that the Acl Entries table is full and cannot add any more entries.
             wlsxAuthMaxBWContracts 1.3.6.1.4.1.14823.2.2.1.1.100.1013
A trap which indicates that the switch reached the maximum number of configurable Bandwidth contracts.
             wlsxPowerSupplyFailure 1.3.6.1.4.1.14823.2.2.1.1.100.1014
A trap which indicates that the power supply has failed.
             wlsxFanFailure 1.3.6.1.4.1.14823.2.2.1.1.100.1015
A trap which indicates that the fan has failed.
             wlsxOutOfRangeVoltage 1.3.6.1.4.1.14823.2.2.1.1.100.1016
A trap which indicates that the switch received out of range voltage.
             wlsxOutOfRangeTemperature 1.3.6.1.4.1.14823.2.2.1.1.100.1017
A trap which indicates that the Temperature is out of bounds.
             wlsxLCInserted 1.3.6.1.4.1.14823.2.2.1.1.100.1018
A trap which indicates that a Line card is inserted.
             wlsxSCInserted 1.3.6.1.4.1.14823.2.2.1.1.100.1019
A trap which indicates that a supervisory card is inserted.
             wlsxGBICInserted 1.3.6.1.4.1.14823.2.2.1.1.100.1020
A trap which indicates that a GBIC is inserted in a line card.
             wlsxProcessDied 1.3.6.1.4.1.14823.2.2.1.1.100.1021
A trap which indicates that a process has died.
             wlsxProcessExceedsMemoryLimits 1.3.6.1.4.1.14823.2.2.1.1.100.1022
A trap which indicates that a process is consuming large amounts of memory.
             wlsxLowOnFlashSpace 1.3.6.1.4.1.14823.2.2.1.1.100.1023
A trap which indicates that the switch is running low on flash space.
             wlsxLowMemory 1.3.6.1.4.1.14823.2.2.1.1.100.1024
A trap which indicates that the system free memory is low.
             wlsxFanTrayRemoved 1.3.6.1.4.1.14823.2.2.1.1.100.1025
A trap which indicates that the fan tray is removed.
             wlsxFanTrayInserted 1.3.6.1.4.1.14823.2.2.1.1.100.1026
A trap which indicates that the fan tray is removed.
             wlsxLCRemoved 1.3.6.1.4.1.14823.2.2.1.1.100.1027
A trap which indicates that a Line card is removed.
             wlsxSCRemoved 1.3.6.1.4.1.14823.2.2.1.1.100.1028
A trap which indicates that a supervisory card is removed.
             wlsxPowerSupplyMissing 1.3.6.1.4.1.14823.2.2.1.1.100.1029
A trap which indicates that the power supply is missing.
             wlsxAccessPointIsUp 1.3.6.1.4.1.14823.2.2.1.1.100.1030
A trap which indicates that an Access point at Location apLocation and Address apIpAddress is up.
             wlsxAccessPointIsDown 1.3.6.1.4.1.14823.2.2.1.1.100.1031
A trap which indicates that an Access point at Location apLocation and Address apIpAddress is down.
             wlsxCoverageHoleDetected 1.3.6.1.4.1.14823.2.2.1.1.100.1032
A trap which indicates that an Access point at Location apLocation and Address apIpAddress has detected a Coverage Hole.
             wlsxChannelChanged 1.3.6.1.4.1.14823.2.2.1.1.100.1033
A trap which indicates that an Access point at Location apLocation and Address apIpAddress has changed the channel to apCurrentChannel.
             wlsxStationAddedToBlackList 1.3.6.1.4.1.14823.2.2.1.1.100.1034
A trap which indicates that a station with address wlsxStationMacAddress is black listed for wlsxStationBlackListReason reason.
             wlsxStationRemovedFromBlackList 1.3.6.1.4.1.14823.2.2.1.1.100.1035
A trap which indicates that a station with address wlsxStationMacAddress is removed from black list.
             wlsxIpSpoofingDetected 1.3.6.1.4.1.14823.2.2.1.1.100.1036
A trap indicating that the switch detected IP Spoofing.
             wlsxDBCommunicationFailure 1.3.6.1.4.1.14823.2.2.1.1.100.1037
A trap to indicate that communication with Database failed.
             wlsxVrrpStateChange 1.3.6.1.4.1.14823.2.2.1.1.100.1038
A trap which indicates that VRRP State has changed on the switch.
             wlsxAPRadioAttributesChanged 1.3.6.1.4.1.14823.2.2.1.1.100.1039
A trap which indicates changes in the Radio attributes of an Access Point at location apLocation and address apIpAddress. Ap channel is apCurrentChannel, and Transmit power is apTxPower.
             wlsxESIServerUp 1.3.6.1.4.1.14823.2.2.1.1.100.1040
A trap which indicates that a ESI server in group with is up
             wlsxESIServerDown 1.3.6.1.4.1.14823.2.2.1.1.100.1041
A trap which indicates that a ESI server in group with is down
             wlsxLicenseExpiry 1.3.6.1.4.1.14823.2.2.1.1.100.1042
A trap which indicates that one or more licenses on the switch will expire in days