WINS-MIB: View SNMP OID List / Download MIB

VENDOR: MICROSOFT


 Home MIB: WINS-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, MSFT-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wins 1.3.6.1.4.1.311.1.2
     par 1.3.6.1.4.1.311.1.2.1
         parWinsStartTime 1.3.6.1.4.1.311.1.2.1.1 displaystring read-only
Wins start time
         parLastPScvTime 1.3.6.1.4.1.311.1.2.1.2 displaystring read-only
Most recent date and time at which planned scavenging took place. Planned scavenging happens at intervals specified in the registry. Scavenging involves changing owned non-refreshed entries to the released state. Further, replicas may be changed to tombstones, tombstones maye be deleted and revalidation of old replicas may take place
         parLastATScvTime 1.3.6.1.4.1.311.1.2.1.3 displaystring read-only
Most recent data and time at which scavenging as a result of administrative action took place
         parLastTombScvTime 1.3.6.1.4.1.311.1.2.1.4 displaystring read-only
Most recent data and time at which replica tombstone scavenging took place
         parLastVerifyScvTime 1.3.6.1.4.1.311.1.2.1.5 displaystring read-only
Most recent data and time at which revalidation of old active replicas took place
         parLastPRplTime 1.3.6.1.4.1.311.1.2.1.6 displaystring read-only
Most recent data and time at which planned replication took place. Planned replication happens at intervals specified in the registry
         parLastATRplTime 1.3.6.1.4.1.311.1.2.1.7 displaystring read-only
Most recent data and time at which administrator triggered replication took place.
         parLastNTRplTime 1.3.6.1.4.1.311.1.2.1.8 displaystring read-only
Most recent data and time at which network triggered replication took place. Network triggered replication happens as a result of an update notification message from a remote WINS
         parLastACTRplTime 1.3.6.1.4.1.311.1.2.1.9 displaystring read-only
Most recent data and time at which address change triggered replication took place. Address change triggered replication happens when the address of an owned name changes due to a new registration
         parLastInitDbTime 1.3.6.1.4.1.311.1.2.1.10 displaystring read-only
Most recent data and time at which the local database was populated statically from one or more data files
         parLastCounterResetTime 1.3.6.1.4.1.311.1.2.1.11 displaystring read-only
Most recent data and time at which the local counters were initialized to zero
         parWinsTotalNoOfReg 1.3.6.1.4.1.311.1.2.1.12 counter read-only
This variable indicates the number of registrations received
         parWinsTotalNoOfQueries 1.3.6.1.4.1.311.1.2.1.13 counter read-only
This variable indicates the number of queries received
         parWinsTotalNoOfRel 1.3.6.1.4.1.311.1.2.1.14 counter read-only
This variable indicates the number of releases received
         parWinsTotalNoOfSuccRel 1.3.6.1.4.1.311.1.2.1.15 counter read-only
This variable indicates the number of releases that succeeded
         parWinsTotalNoOfFailRel 1.3.6.1.4.1.311.1.2.1.16 counter read-only
This variable indicates the number of releases that failed
         parWinsTotalNoOfSuccQueries 1.3.6.1.4.1.311.1.2.1.17 counter read-only
This variable indicates the number of queries that succeeded
         parWinsTotalNoOfFailQueries 1.3.6.1.4.1.311.1.2.1.18 counter read-only
This variable indicates the number of queries that failed
         parRefreshInterval 1.3.6.1.4.1.311.1.2.1.19 integer read-write
This variable indicates the refresh interval. Unit is in milliseconds
         parTombstoneInterval 1.3.6.1.4.1.311.1.2.1.20 integer read-write
This variable indicates the tombstone interval, Unit is in milliseconds
         parTombstoneTimeout 1.3.6.1.4.1.311.1.2.1.21 integer read-write
This variable indicates the tombstone timeout. Unit is in milliseconds
         parVerifyInterval 1.3.6.1.4.1.311.1.2.1.22 integer read-write
This variable indicates the verify interval Unit is in milliseconds.
         parVersCounterStartValLowWord 1.3.6.1.4.1.311.1.2.1.23 counter read-write
This variable indicates the low word of the version counter that WINS should start with
         parVersCounterStartValHighWord 1.3.6.1.4.1.311.1.2.1.24 counter read-write
This variable indicates the High word of the version counter that WINS should start with
         parRplOnlyWCnfPnrs 1.3.6.1.4.1.311.1.2.1.25 integer read-write
This variable indicates whether or not replication should be done with non-configures pnrs. If not set to zero, replication will be done only with partners listed in the registry (except when an update notification comes in)
         parStaticDataInit 1.3.6.1.4.1.311.1.2.1.26 integer read-write
This variable indicates whether Static data should be read in at initialization and reconfiguration time. Update of any mib variable in the parameters group constitutes reconfigurations
         parLogFlag 1.3.6.1.4.1.311.1.2.1.27 integer read-write
This variable indicates whether logging should be done. Default behaviour is to do logging
         parLogFileName 1.3.6.1.4.1.311.1.2.1.28 displaystring read-write
This variable gives the path to the log file
         parBackupDirPath 1.3.6.1.4.1.311.1.2.1.29 displaystring read-write
This variable gives the path to the backup dir
         parDoBackupOnTerm 1.3.6.1.4.1.311.1.2.1.30 integer read-write
This variable specifies whether WINS should do backup on termination. Setting it 1 holds no meaning unless parBackupDirPath is set also Enumeration: 'yes': 1, 'no': 0.
         parMigrateOn 1.3.6.1.4.1.311.1.2.1.31 integer read-write
This variable specifies whether static records in the wins database should be treated as dynamic records during conflicts with new dynamic registrations. Enumeration: 'yes': 1, 'no': 0.
     pull 1.3.6.1.4.1.311.1.2.2
         pullInitTime 1.3.6.1.4.1.311.1.2.2.1 integer read-write
This variable indicates whether pull should be done at WINS invocation and at reconfiguration. If any pull group's mib variable is set, that constitutes reconfiguration
         pullCommRetryCount 1.3.6.1.4.1.311.1.2.2.2 integer read-write
This variable gives the retry count in case of comm failure when doing pull replication. This is the max. number of retries that will be done at the interval specified for the Partner before WINS will stop for a certain number (canned) of replication time intervals before starting again.
         pullPnrTable 1.3.6.1.4.1.311.1.2.2.3 read-write
A list of Partners with which pull replication needs to be done
             pPullPnrEntry 1.3.6.1.4.1.311.1.2.2.3.1 read-write
This is the row corresponding to a partner
                 pullPnrAdd 1.3.6.1.4.1.311.1.2.2.3.1.1 ipaddress read-write
This is the address of the remote WINS partner
                 pullPnrSpTime 1.3.6.1.4.1.311.1.2.2.3.1.2 displaystring read-write
This variable gives the specific time at which pull replication should occur
                 pullPnrTimeInterval 1.3.6.1.4.1.311.1.2.2.3.1.3 integer read-write
This variable gives the time interval for pull replication
                 pullPnrMemberPrec 1.3.6.1.4.1.311.1.2.2.3.1.4 integer read-write
This is the precedence to be given to members of the special group pulled from the WINS. Note: the precedence of locally registered members of a special group is more than any replicas pulled in Enumeration: 'high': 1, 'low': 0.
                 pullPnrNoOfSuccRpls 1.3.6.1.4.1.311.1.2.2.3.1.5 counter read-only
The number of times replication was successful with the WINS after invocation or reset of counters
                 pullPnrNoOfCommFails 1.3.6.1.4.1.311.1.2.2.3.1.6 counter read-only
The number of times replication was unsuccessful with the WINS due to comm. failure (after invocation or reset of counters
                 pullPnrVersNoLowWord 1.3.6.1.4.1.311.1.2.2.3.1.7 counter read-only
The low word of the highest vers. no found in records owned by this WINS.
                 pullPnrVersNoHighWord 1.3.6.1.4.1.311.1.2.2.3.1.8 counter read-only
The high word of the highest vers. no found in records owned by this WINS.
     push 1.3.6.1.4.1.311.1.2.3
         pushInitTime 1.3.6.1.4.1.311.1.2.3.1 integer read-write
This variable indicates whether a push (i.e. notification message) should be done at invocation.
         pushRplOnAddChg 1.3.6.1.4.1.311.1.2.3.2 integer read-write
This variable indicates whether a notification message should be sent when address changes
         pushPnrTable 1.3.6.1.4.1.311.1.2.3.3 read-write
A list of WINS Partners with which push replication is to be initiated
             pushPnrEntry 1.3.6.1.4.1.311.1.2.3.3.1 read-write
This is the row corresponding to the WINS pnr
                 pushPnrAdd 1.3.6.1.4.1.311.1.2.3.3.1.1 ipaddress read-write
Address of the WINS partner
                 pushPnrUpdateCount 1.3.6.1.4.1.311.1.2.3.3.1.2 integer read-write
This variable indicates the # of updates that should result in a push message
     datafiles 1.3.6.1.4.1.311.1.2.4
         dfDatafilesTable 1.3.6.1.4.1.311.1.2.4.1 read-write
A list of datafiles specified under the Datafiles key in the registry. These files are used for statically initialization of the WINS database
             dfDatafileEntry 1.3.6.1.4.1.311.1.2.4.1.1 read-write
data file name
                 dfDatafileIndex 1.3.6.1.4.1.311.1.2.4.1.1.1 integer no-access
Used for indexing entries in the datafiles table. It has no other use
                 dfDatafileName 1.3.6.1.4.1.311.1.2.4.1.1.2 displaystring read-write
Name of the datafile to use for static initialization
     cmd 1.3.6.1.4.1.311.1.2.5
         cmdPullTrigger 1.3.6.1.4.1.311.1.2.5.1 ipaddress read-write
This variable when set will cause the WINS to pull from the remote WINS identified by the IpAddress
         cmdPushTrigger 1.3.6.1.4.1.311.1.2.5.2 ipaddress read-write
This variable when set will cause the WINS to push a notification message to the remote WINS identified by the IpAddress
         cmdDeleteWins 1.3.6.1.4.1.311.1.2.5.3 ipaddress read-write
This variable when set will cause all information pertaining to a WINS (data records, context information to be deleted from the local WINS. Use this only when owner-address mapping table is getting to near capacity. NOTE: deletion of all information pertaining to the managed WINS is not permitted
         cmdDoScavenging 1.3.6.1.4.1.311.1.2.5.4 integer read-write
This variable when set will cause WINS to do scavenging. Enumeration: 'yes': 1, 'no': 0.
         cmdDoStaticInit 1.3.6.1.4.1.311.1.2.5.5 displaystring read-write
When set WINS will do static initialization using the file specified as the value. If 0 is specified, WINS will do static initialization using the files specified in the registry (can be read-written using Datafile table
         cmdNoOfWrkThds 1.3.6.1.4.1.311.1.2.5.6 integer read-write
Sets the number of worker threads in WINS
         cmdPriorityClass 1.3.6.1.4.1.311.1.2.5.7 integer read-write
Set the priority class of WINS to normal or high Enumeration: 'high': 1, 'normal': 0.
         cmdResetCounters 1.3.6.1.4.1.311.1.2.5.8 integer read-write
Reset the counters. Value is ignored
         cmdDeleteDbRecs 1.3.6.1.4.1.311.1.2.5.9 ipaddress read-write
This variable when set will cause all date records pertaining to a WINS to be deleted from the local WINS. Note: Only data records are deleted.
         cmdDRPopulateTable 1.3.6.1.4.1.311.1.2.5.10 ipaddress read-write
This variable can set to retrieve records of a WINS whose Ip address is provided. When set the table is populated right-away
         cmdDRDataRecordsTable 1.3.6.1.4.1.311.1.2.5.11 read-only
This is the table that stores the data records The records are sorted lexicographically by name Note: the table is cached (to save on overhead on WINS) To repopulate the table, set cmdDRDataRecordsTable mib var
               cmdDRRecordEntry 1.3.6.1.4.1.311.1.2.5.11.1 read-write
data record owned by WINS whose address was specified when CmdDRRecordsTable was set
                   cmdDRRecordName 1.3.6.1.4.1.311.1.2.5.11.1.1 octet string read-only
Name in the record
                   cmdDRRecordAddress 1.3.6.1.4.1.311.1.2.5.11.1.2 octet string read-only
Address(es) of the record. If the record is a multihomed record or a special group, the addresses are returned sequentially in pairs. Each pair is comprised of the address of the owner wins followed by the address of the machine (multihomed)/member (special group). Note: Following snmp's convention, the records are always returned in network byte order
                   cmdDRRecordType 1.3.6.1.4.1.311.1.2.5.11.1.3 integer read-only
Type of the record Enumeration: 'multihomed': 3, 'specialgroup': 2, 'unique': 0, 'normalgroup': 1.
                   cmdDRRecordPersistenceType 1.3.6.1.4.1.311.1.2.5.11.1.4 integer read-only
Persistence type of the record Enumeration: 'dynamic': 1, 'static': 0.
                   cmdDRRecordState 1.3.6.1.4.1.311.1.2.5.11.1.5 integer read-only
State of the record. Enumeration: 'active': 0, 'released': 1, 'tombstone': 2, 'deleted': 3.
         cmdWinsVersNoLowWord 1.3.6.1.4.1.311.1.2.5.12 integer read-only
The low word of the version number counter of the WINS
         cmdWinsVersNoHighWord 1.3.6.1.4.1.311.1.2.5.13 integer read-only
The high word of the version number counter of the WINS