WHISP-SM-MIB: View SNMP OID List / Download MIB

VENDOR: MOTOROLA

Home	MIB: WHISP-SM-MIB
Download as:		SNMPv2-CONF, WHISP-GLOBAL-REG-MIB, WHISP-TCV2-MIB, SNMPv2-SMI, WHISP-BOX-MIBV2-MIB, SNMPv2-TC		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
whispSmMibModule	1.3.6.1.4.1.161.19.1.1.13			This module contains MIB definitions for Subscriber Modem.
whispSmConfig	1.3.6.1.4.1.161.19.3.2.1
rfScanList	1.3.6.1.4.1.161.19.3.2.1.1	displaystring	read-write	RF scan list. The frequencies are: 2.4 radios:24150,24175,24200,24225,24250,24275,24300,24325,24350,24375, 24400,24425,24450,24475,24500,24525,24550,24575. 3.5 radios:340000-360000 added and removed dynamically. 4.9 radios:494500-498500 added and removed dynamically. 5.1 radios:5175,5180,5185,5190,5195,5200,5205,5210,5215,5220,5225,5230,5240, 5245,5250,5255,5260,5265,5270,5275,5280,5285,5290,5295,5300,5305, 5310,5315,5320,5325. 5.2 radios:5275,5280,5285,5290,5295,5300,5305,5310,5315,5320,5325. 5.4 FSK radios:5495,5500,5505,5510,5515,5520,5525, 5530,5535,5540,5545,5550,5555,5560,5565,5570,5575,5580,5585,5590,5595, 5600,5605,5610,5615,5620,5625,5630,5635,5640,5645,5650,5655,5660,5665, 5670,5675,5680,5685,5690,5695,5700,5705. 5.4 OFDM radios 5 mhz channels: 547250,547500,547750,548000,548500,548750,549000,549250,549500,549750,550000,550250,550500,550750,551000,551250,551500,551750,552000,552250,552500,552750, 553000,553250,553500,553750,554000,554250,554500,554750,555000,555250,555500,555750,556000,556250,556500,556750,557000,557250,557500,557750,558000,558250,558500,558750,559000,559250,559500,559750, 560000,560250,560500,560750,561000,561250,561500,561750,562000,562250,562500,562750,563000,563250,563500,563750,564000,564250,564500,564750,565000,565250,565500,565750,566000,566250,566500,566750, 567000,567250,567500,567750,568000,568250,568500,568750,569000,569250,569500,569750,570000,570250,570500,570750,571000,571250,571500,571750. 5.4 OFDM radios 10 mhz channels: 547500,548500,549000,549500,550000,550500,551000,551500,552000,552500, 553000,553500,554000,554500,555000,555500,556000,556500,557000,557500,558000,558500,559000,559500, 560000,560500,561000,561500,562000,562500,563000,563500,564000,564500,565000,565500,566000,566500, 567000,567500,568000,568500,569000,569500,570000,570500,571000,571500. 5.4 OFDM radios 20 mhz channels: 547500,548500,549000,549500,550000,550500,551000,551500,552000,552500, 553000,553500,554000,554500,555000,555500,556000,556500,557000,557500,558000,558500,559000,559500, 560000,560500,561000,561500,562000,562500,563000,563500,564000,564500,565000,565500,566000,566500, 567000,567500,568000,568500,569000,569500,570000,570500,571000,571500. 5.7 FSK radios with ISM enabled :5735,5740,5745,5750,5755,5760,5765,5770,5775, 5780,5785,5790,5795,5800,5805,5810,5815,5820,5825,5830,5835,5840. 5.7 OFDM radios 5 mhz channels :572750,573000,573250,573500,573750,574000,574250,574500,574750,575000,575250,575500,575750,576000,576250,576500,576750,577000,577250,577500,577750, 578000,578250,578500,578750,579000,579250,579500,579750,580000,580250,580500,580750,581000,581250,581500,581750,582000,582250,582500,582750,583000,583250,583500,583750,584000, 584250,584500,584750,585000,585250,585500,585750,586000,586250,586500,586750,587000,587250. 5.7 OFDM radios 10 mhz channels:573000,573500,574000,574500,575000,575500,576000,576500,577000,577500, 578000,578500,579000,579500,580000,580500,581000,581500,582000,582500,583000,583500,584000,584500,585000,585500,586000,586500,587000. 5.7 OFDM radios 20 mhz channels :573500,574000,574500,575000,575500,576000,576500,577000,577500, 578000,578500,579000,579500,580000,580500,581000,581500,582000,582500,583000,583500,584000,584500,585000,585500,586000,586500. 5.8 radios:5860,5865,5870,5875,5880,5885,5890,5895,5900,5905,5910. 5805,5810,5815,5820,5825,5830,5835,5840,5845,5850,5855,5860,5865,5870,5875,5880, 5885,5890,5895,5900,5905,5910,5915,5920,5925,5930,5935,5940,5945,5950. 5.9 radios:5735,5740,5745,5750,5755,5760,5765,5770,5775,5780,5785,5790,5795,5800, 5805,5810,5815,5820,5825,5830,5835,5840,5845,5850,5855,5860,5865,5870,5875,5880, 5885,5890,5895,5900,5905,5910,5915,5920,5925,5930,5935,5940,5945,5950. 6.050 radios:5850,5855,5860,5865,5870,5875,5880,5885,5890,5895,5900,5905,5910,5915,5920, 5925,5930,5935,5940,5945,5950,5955,5960,5965,5970,5975,5980,5985,5990,5995,6000, 6005,6010,6015,6020,6025,6030,6035,6040,6045,6050. 900 radios:9060,9070,9080,9090,9100,9110,9120,9130,9140,9150,9160,9170,9180,9190,9200,9220,9230,9240. 0: none. all: All frequencies in the band(s) supported by the radio will be selected. all54: All frequencies in the 5.4 band will be selected (only available on dual band radios). all57: All frequencies in the 5.7 band will be selected (only available on dual band radios). When doing a set, separate values with comma with no white space between values.
powerUpMode	1.3.6.1.4.1.161.19.3.2.1.2	integer	read-write	SM Power Up Mode With No 802.3 Link. 1 -- Power up in Aim mode 2 -- Power up in Operational mode. Enumeration: 'aim': 1, 'operational': 0.
lanIpSm	1.3.6.1.4.1.161.19.3.2.1.3	ipaddress	read-write	LAN IP.
lanMaskSm	1.3.6.1.4.1.161.19.3.2.1.4	ipaddress	read-write	LAN subnet mask.
defaultGwSm	1.3.6.1.4.1.161.19.3.2.1.5	ipaddress	read-write	Default gateway.
networkAccess	1.3.6.1.4.1.161.19.3.2.1.6	integer	read-write	Network accessibility. Public or local IP. For multipoint only. Enumeration: 'publicIP': 1, 'localIP': 0.
authKeySm	1.3.6.1.4.1.161.19.3.2.1.7	displaystring	read-write	Authentication key. It should be equal or less than 32 characters long.
enable8023link	1.3.6.1.4.1.161.19.3.2.1.8	integer	read-write	To enable or disable 802.3 link. For SMs only. Enumeration: 'disabled': 0, 'enabled': 1.
authKeyOption	1.3.6.1.4.1.161.19.3.2.1.9	integer	read-write	This option is for SMs only. Backhaul timing slave always uses the set key. 0 - Use default key. 1 - Use set key. Enumeration: 'useDefault': 0, 'useKeySet': 1.
timingPulseGated	1.3.6.1.4.1.161.19.3.2.1.10	integer	read-write	0 - Disable (Always propagate the frame timing pulse). 1 - Enable (If SM out of sync then dont propagate the frame timing pulse). Enumeration: 'enable': 1, 'disable': 0.
naptPrivateIP	1.3.6.1.4.1.161.19.3.2.1.11	ipaddress	read-write	NAPT private IP address. Only the first three bytes can be changed when NAPT is enabled.
naptPrivateSubnetMask	1.3.6.1.4.1.161.19.3.2.1.12	ipaddress	read-write	NAPT private subnet mask. Only the last byte can be changed when NAPT is enabled. The address will always be: 255.255.255.x.
naptPublicIP	1.3.6.1.4.1.161.19.3.2.1.13	ipaddress	read-write	IP Address of NAPT Public Interface. The variable is available only when NAPT is enabled.
naptPublicSubnetMask	1.3.6.1.4.1.161.19.3.2.1.14	ipaddress	read-write	Subnet mask for NAPT Public Interface. The variable is available only when NAPT is enabled.
naptPublicGatewayIP	1.3.6.1.4.1.161.19.3.2.1.15	ipaddress	read-write	IP Address of NAPT Public Interface Gateway. The variable is available only when NAPT is enabled.
naptRFPublicIP	1.3.6.1.4.1.161.19.3.2.1.16	ipaddress	read-write	IP Address of RF Public Interface. The variable is available only when NAPT is enabled.
naptRFPublicSubnetMask	1.3.6.1.4.1.161.19.3.2.1.17	ipaddress	read-write	Subnet mask of RF Public Interface. The variable is available only when NAPT is enabled.
naptRFPublicGateway	1.3.6.1.4.1.161.19.3.2.1.18	ipaddress	read-write	IP Address of RF Public Interface Gateway. The variable is available only when NAPT is enabled.
naptEnable	1.3.6.1.4.1.161.19.3.2.1.19	integer	read-write	To enable or disable NAPT. For multipoint only. 1=Enable NAPT, 0=Disable NAPT. Enumeration: 'disabled': 0, 'enabled': 1.
arpCacheTimeout	1.3.6.1.4.1.161.19.3.2.1.20	integer	read-write	ARP cache time out in unit of minutes. For multipoint only. Range from 1-30.
tcpGarbageCollectTmout	1.3.6.1.4.1.161.19.3.2.1.21	integer	read-write	Units of minutes for TCP garbage collection. For multipoint only. Range 4-1440.
udpGarbageCollectTmout	1.3.6.1.4.1.161.19.3.2.1.22	integer	read-write	Units of minutes for UDP garbage collection. For multipoint only. Range 1-1440.
dhcpClientEnable	1.3.6.1.4.1.161.19.3.2.1.23	integer	read-write	To enable or disable DHCP client. For multipoint SM's with NAPT enabled. Enumeration: 'disabled': 0, 'enabled': 1.
dhcpServerEnable	1.3.6.1.4.1.161.19.3.2.1.24	integer	read-write	To enable or disable DHCP server. For multipoint SM's with NAPT enabled. Enumeration: 'disabled': 0, 'enabled': 1.
dhcpServerLeaseTime	1.3.6.1.4.1.161.19.3.2.1.25	integer	read-write	Units of days for DHCP server lease time. For multipoint SM's with NAPT enabled. Range from 1-30.
dhcpIPStart	1.3.6.1.4.1.161.19.3.2.1.26	ipaddress	read-write	The last byte will be set for the starting IP that our DHCP server gives away. The first 3 bytes of the starting IP are the same as those of NAPT private IP
dnsAutomatic	1.3.6.1.4.1.161.19.3.2.1.27	integer	read-write	To have DHCP Server obtain DNS information automatically or manually. Enumeration: 'automatically': 1, 'manually': 0.
prefferedDNSIP	1.3.6.1.4.1.161.19.3.2.1.28	ipaddress	read-write	The preferred DNS IP when we are configured for static DNS (Not used when configured for automatic DNS).
alternateDNSIP	1.3.6.1.4.1.161.19.3.2.1.29	ipaddress	read-write	The alternate DNS IP when we are configured for static DNS (Not used when configured for automatic DNS).
dmzIP	1.3.6.1.4.1.161.19.3.2.1.30	ipaddress	read-write	Only the last byte of DMZ Host IP will be set. The first 3 bytes of DMZ IP are the same as those of NAPT private IP.
dmzEnable	1.3.6.1.4.1.161.19.3.2.1.31	integer	read-write	To enable or disable DMZ host functionality. Enumeration: 'disabled': 0, 'enabled': 1.
dhcpNumIPsToLease	1.3.6.1.4.1.161.19.3.2.1.32	integer	read-write	Number of IP addresses that our DHCP server can give away.
pppoeFilter	1.3.6.1.4.1.161.19.3.2.1.33	integer	read-write	To set PPPoE packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB. Enumeration: 'filterOn': 1, 'filterOff': 0.
smbFilter	1.3.6.1.4.1.161.19.3.2.1.34	integer	read-write	To set SMB packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB. Enumeration: 'filterOn': 1, 'filterOff': 0.
snmpFilter	1.3.6.1.4.1.161.19.3.2.1.35	integer	read-write	To set SNMP packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB. Enumeration: 'filterOn': 1, 'filterOff': 0.
userP1Filter	1.3.6.1.4.1.161.19.3.2.1.36	integer	read-write	To set user defined port 1 packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB. Enumeration: 'filterOn': 1, 'filterOff': 0.
userP2Filter	1.3.6.1.4.1.161.19.3.2.1.37	integer	read-write	To set user defined port 2 packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB. Enumeration: 'filterOn': 1, 'filterOff': 0.
userP3Filter	1.3.6.1.4.1.161.19.3.2.1.38	integer	read-write	To set user defined port 3 packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB. Enumeration: 'filterOn': 1, 'filterOff': 0.
allOtherIpFilter	1.3.6.1.4.1.161.19.3.2.1.39	integer	read-write	To set all other IPv4 packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB. Enumeration: 'filterOn': 1, 'filterOff': 0.
upLinkBCastFilter	1.3.6.1.4.1.161.19.3.2.1.40	integer	read-write	This variable is currently obsolete. Enumeration: 'filterOn': 1, 'filterOff': 0.
arpFilter	1.3.6.1.4.1.161.19.3.2.1.41	integer	read-write	To set ARP packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB. Enumeration: 'filterOn': 1, 'filterOff': 0.
allOthersFilter	1.3.6.1.4.1.161.19.3.2.1.42	integer	read-write	To set all other packet filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB. Enumeration: 'filterOn': 1, 'filterOff': 0.
userDefinedPort1	1.3.6.1.4.1.161.19.3.2.1.43	integer	read-write	An integer value of number one user defined port. Range:0-65535 Obsolete - Use corresponding OID in whipsBoxConfig MIB.
port1TCPFilter	1.3.6.1.4.1.161.19.3.2.1.44	integer	read-write	To set user defined port 1 TCP traffic filter. Obsolete - Use corresponding OID in whipsBoxConfig MIB. Enumeration: 'filterOn': 1, 'filterOff': 0.
port1UDPFilter	1.3.6.1.4.1.161.19.3.2.1.45	integer	read-write	To set user defined port 1 UDP traffic filter. Obsolete - Use corresponding OID in whipsBoxConfig MIB. Enumeration: 'filterOn': 1, 'filterOff': 0.
userDefinedPort2	1.3.6.1.4.1.161.19.3.2.1.46	integer	read-write	An integer value of number two user defined port. Range:0-65535 Obsolete - Use corresponding OID in whipsBoxConfig MIB.
port2TCPFilter	1.3.6.1.4.1.161.19.3.2.1.47	integer	read-write	To set user defined port 2 TCP traffic filter. Obsolete - Use corresponding OID in whipsBoxConfig MIB. Enumeration: 'filterOn': 1, 'filterOff': 0.
port2UDPFilter	1.3.6.1.4.1.161.19.3.2.1.48	integer	read-write	To set user defined port 2 UDP traffic filter. Obsolete - Use corresponding OID in whipsBoxConfig MIB. Enumeration: 'filterOn': 1, 'filterOff': 0.
userDefinedPort3	1.3.6.1.4.1.161.19.3.2.1.49	integer	read-write	An integer value of number three user defined port. Range:0-65535 Obsolete - Use corresponding OID in whipsBoxConfig MIB.
port3TCPFilter	1.3.6.1.4.1.161.19.3.2.1.50	integer	read-write	To set user defined port 3 TCP traffic filter. Obsolete - Use corresponding OID in whipsBoxConfig MIB. Enumeration: 'filterOn': 1, 'filterOff': 0.
port3UDPFilter	1.3.6.1.4.1.161.19.3.2.1.51	integer	read-write	To set user defined port 3 UDP traffic filter. Obsolete - Use corresponding OID in whipsBoxConfig MIB. Enumeration: 'filterOn': 1, 'filterOff': 0.
bootpcFilter	1.3.6.1.4.1.161.19.3.2.1.52	integer	read-write	To set bootp client sourced packets filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB. Enumeration: 'filterOn': 1, 'filterOff': 0.
bootpsFilter	1.3.6.1.4.1.161.19.3.2.1.53	integer	read-write	To set bootp server sourced packets filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB. Enumeration: 'filterOn': 1, 'filterOff': 0.
ip4MultFilter	1.3.6.1.4.1.161.19.3.2.1.54	integer	read-write	To set IPv4 MultiCast packets filter when NAT is disabled. Obsolete - Use corresponding OID in whipsBoxConfig MIB. Enumeration: 'filterOn': 1, 'filterOff': 0.
ingressVID	1.3.6.1.4.1.161.19.3.2.1.55	integer	read-write	Untagged ingress VID.
lowPriorityUplinkCIR	1.3.6.1.4.1.161.19.3.2.1.56	integer	read-write	Low priority uplink CIR.
lowPriorityDownlinkCIR	1.3.6.1.4.1.161.19.3.2.1.57	integer	read-write	Low priority downlink CIR.
hiPriorityChannel	1.3.6.1.4.1.161.19.3.2.1.58	integer	read-write	To enable or disable high priority channel. Enumeration: 'disabled': 0, 'enable': 1.
hiPriorityUplinkCIR	1.3.6.1.4.1.161.19.3.2.1.59	integer	read-write	High priority uplink CIR.
hiPriorityDownlinkCIR	1.3.6.1.4.1.161.19.3.2.1.60	integer	read-write	High priority downlink CIR.
smRateAdapt	1.3.6.1.4.1.161.19.3.2.1.61	integer	read-write	Rate adaptation parameter. 0: no rate adaptation. 1: 1x and 2x adaptation. 2: 1x,2x and 3x adaptation. Enumeration: 'onex': 0, 'onextwoxthreex': 2, 'onextwox': 1.
upLnkDataRate	1.3.6.1.4.1.161.19.3.2.1.62	integer	read-write	Sustained uplink bandwidth cap.
upLnkLimit	1.3.6.1.4.1.161.19.3.2.1.63	integer	read-write	Burst uplink bandwidth cap.
dwnLnkDataRate	1.3.6.1.4.1.161.19.3.2.1.64	integer	read-write	Sustained downlink bandwidth cap.
dwnLnkLimit	1.3.6.1.4.1.161.19.3.2.1.65	integer	read-write	Burst downlink bandwidth cap.
dfsConfig	1.3.6.1.4.1.161.19.3.2.1.66	integer	read-write	To configure proper regions for Dynamic Frequency Shifting. For 5.2/5.4/5.7 GHz radios. Enumeration: 'enable': 1, 'disable': 0.
ethAccessFilterEnable	1.3.6.1.4.1.161.19.3.2.1.67	integer	read-write	To enable or disable Ethernet Port access filtering to SM Management Functions. (0) - Ethernet access to SM Management allowed. (1) - Ethernet access to SM Management blocked. Enumeration: 'enable': 1, 'disable': 0.
ipAccessFilterEnable	1.3.6.1.4.1.161.19.3.2.1.68	integer	read-write	To enable or disable IP access filtering to Management functions. (0) - IP access will be allowed from all addresses. (1) - IP access will be controlled using allowedIPAccess1-3 entries. Enumeration: 'enable': 1, 'disable': 0.
allowedIPAccess1	1.3.6.1.4.1.161.19.3.2.1.69	ipaddress	read-write	Allow access to SM Management from this IP. 0 is default setting to allow from all IPs.
allowedIPAccess2	1.3.6.1.4.1.161.19.3.2.1.70	ipaddress	read-write	Allow access to SM Management from this IP. 0 is default setting to allow from all IPs.
allowedIPAccess3	1.3.6.1.4.1.161.19.3.2.1.71	ipaddress	read-write	Allow access to SM Management from this IP. 0 is default setting to allow from all IPs.
rfDhcpState	1.3.6.1.4.1.161.19.3.2.1.72	integer	read-write	To enable or disable RF Interface DHCP feature. Enumeration: 'disabled': 0, 'enabled': 1.
bCastMIR	1.3.6.1.4.1.161.19.3.2.1.73	integer	read-write	To enable and set Broadcast/ Multicast MIR feature. Use value of 0 to disable. Units are in kbps Enumeration: 'disabled': 0.
bhsReReg	1.3.6.1.4.1.161.19.3.2.1.74	integer	read-write	Allows BHS re-registration every 24 hours. Enable allows re-registration and Disable does not. 24 Hour Encryption Refresh. Enumeration: 'disabled': 0, 'enabled': 1.
smLEDModeFlag	1.3.6.1.4.1.161.19.3.2.1.75	integer	read-write	To set LED Panel Operation to Revised Mode(1) or to Legacy Mode(0) Enumeration: 'legacy': 0, 'revised': 1.
ethAccessEnable	1.3.6.1.4.1.161.19.3.2.1.76	integer	read-write	To enable or disable Ethernet Port access to SM Management Functions. (1) - Ethernet access to SM Management allowed. (0) - Ethernet access to SM Management blocked. Enumeration: 'enable': 1, 'disable': 0.
pppoeEnable	1.3.6.1.4.1.161.19.3.2.1.77	integer	read-write	Enable or disable PPPoE on the SM. NAT MUST be enabled prior and Translation Bridging MUST be DISABLED on the AP. Enumeration: 'enable': 1, 'disable': 0.
pppoeAuthenticationType	1.3.6.1.4.1.161.19.3.2.1.78	integer	read-write	Set the PPPoE Authentication Type to either None or CHAP/pap Enumeration: 'none': 0, 'chap-pap': 1.
pppoeAccessConcentrator	1.3.6.1.4.1.161.19.3.2.1.79	displaystring	read-write	Set the PPPoE Access Concentrator Name. Less than or equal to 32 characters
pppoeServiceName	1.3.6.1.4.1.161.19.3.2.1.80	displaystring	read-write	Set the PPPoE Service Name. Less than or equal to 32 characters
pppoeUserName	1.3.6.1.4.1.161.19.3.2.1.81	displaystring	read-write	Set the PPPoE Username. Less than or equal to 32 characters
pppoePassword	1.3.6.1.4.1.161.19.3.2.1.82	displaystring	read-write	Set the PPPoE Password. Less than or equal to 32 characters
pppoeTCPMSSClampEnable	1.3.6.1.4.1.161.19.3.2.1.83	integer	read-write	Enable or disable TCP MSS Clamping. Enabling this will cause the SM to edit the TCP MSS in TCP SYN and SYN-ACK packets. This will allow for a workaround for MTU issues so that the TCP session will only go up to the clamped MSS. If you are using PMTUD reliably, this should not be needed. Enumeration: 'enable': 1, 'disable': 0.
pppoeMTUOverrideEnable	1.3.6.1.4.1.161.19.3.2.1.84	integer	read-write	Enable the overriding of the PPP link's MTU. Normally, the PPP link will set the MTU to the MRU of the PPPoE Server, but this may be overridden. If the MRU of the PPPoE server is smaller than the desired MTU, the smaller MTU will be used. Enumeration: 'enable': 1, 'disable': 0.
pppoeMTUOverrideValue	1.3.6.1.4.1.161.19.3.2.1.85	integer	read-write	Enable the overriding of the PPP link's MTU. Normally, the PPP link will set the MTU to the MRU of the PPPoE Server, but this may be overridden. If the MRU of the PPPoE server is smaller than the desired MTU, the smaller MTU will be used. Max MTU of a PPPoE link is 1492.
pppoeTimerType	1.3.6.1.4.1.161.19.3.2.1.86	integer	read-write	Set the PPPoE Timer type. Can be a Keep Alive timer where the link will be checked periodically and automatically redialed if the link is down. Also could be an Idle Timeout where the link will be automatically dropped after an idle period and redialed if user data is present. Keep Alive timers are in seconds while Idle Timeout timers are in minutes. Enumeration: 'idleTimeout': 2, 'keepAlive': 1.
pppoeTimeoutPeriod	1.3.6.1.4.1.161.19.3.2.1.87	integer	read-write	The Timeout Period. The use of this depends on the Timer Type. If the Timer Type is KeepAlive, then the timeout period is in seconds. If the Timer Type is Idle Timeout, then the timeout period is in minutes. Minimum values are 20 seconds for KeepAlive timer, and 5 minutes for Idle Timeout.
timedSpectrumAnalysisDuration	1.3.6.1.4.1.161.19.3.2.1.88	integer	read-write	As of release 13.0.2 this value is depricated. Please use the OID in whispBoxConfig. Value in seconds for a timed spectrum analysis. Range is 10-1000 seconds.
spectrumAnalysisOnBoot	1.3.6.1.4.1.161.19.3.2.1.89	integer	read-write	To enable or disable Spectrum Analysis on boot up for one scan through the band. (0) - Disabled (1) - Enabled Enumeration: 'enable': 1, 'disable': 0.
spectrumAnalysisAction	1.3.6.1.4.1.161.19.3.2.1.90	integer	read-write	As of release 13.0.2, this OID has been deprecated. Please use the OID in whispBoxConfig. Start or stop timed or continuous Spectrum Analysis and also give status. (0) - Stop Spectrum Analysis (1) - Start Timed Spectrum Analysis (2) - Start Continuous Spectrum Analysis (3) - Idle, no Spectrum Analysis results. (4) - Idle, Spectrum Analysis results available. (5) - Timed or Remote Spectrum Analysis in progress. (6) - Continuous Spectrum Analysis in progress. Note: Continuous mode has a max of 24 hours. Enumeration: 'stopSpectrumAnalysis': 0, 'startTimedSpectrumAnalysis': 1, 'startContinuousSpectrumAnalysis': 2, 'idleNoSpectrumAnalysis': 3, 'idleCompleteSpectrumAnalysis': 4, 'inProgressTimedSpectrumAnalysis': 5, 'inProgressContinuousSpectrumAnalysis': 6.
pppoeConnectOD	1.3.6.1.4.1.161.19.3.2.1.91	integer	read-write	Force a manual PPPoE connection attempt. Enumeration: 'connectOnDemand': 1.
pppoeDisconnectOD	1.3.6.1.4.1.161.19.3.2.1.92	integer	read-write	Force a manual PPPoE disconnection. Enumeration: 'disconnectOnDemand': 1.
smAntennaType	1.3.6.1.4.1.161.19.3.2.1.93	integer	read-write	Deprecated. See whispBoxStatus.antType for antenna type information. Enumeration: 'integrated': 0, 'external': 1.
natConnectionType	1.3.6.1.4.1.161.19.3.2.1.94	integer	read-write	To configure the SM NAT connection type. Options are Static IP, DHCP, or PPPoE. Enumeration: 'dhcp': 1, 'staticIP': 0, 'pppoe': 2.
wanPingReplyEnable	1.3.6.1.4.1.161.19.3.2.1.95	integer	read-write	Allow Ping replies from SM WAN interface. Applies to both NAT and PPPoE WAN interfaces. Enumeration: 'enable': 1, 'disable': 0.
packetFilterDirection	1.3.6.1.4.1.161.19.3.2.1.96	integer	read-write	To packet filter direction when NAT is disabled. Upstream is default. Obsolete - Use corresponding OID in whipsBoxConfig MIB. Enumeration: 'downstream': 2, 'upstream': 1.
colorCode2	1.3.6.1.4.1.161.19.3.2.1.97	integer	read-write	Second Color code.
colorCodepriority2	1.3.6.1.4.1.161.19.3.2.1.98	integer	read-write	Priority setting for second color code. Enumeration: 'disable': 0, 'primary': 1, 'tertiary': 3, 'secondary': 2.
colorCode3	1.3.6.1.4.1.161.19.3.2.1.99	integer	read-write	Third Color code.
colorCodepriority3	1.3.6.1.4.1.161.19.3.2.1.100	integer	read-write	Priority setting for the third color code. Enumeration: 'disable': 0, 'primary': 1, 'tertiary': 3, 'secondary': 2.
colorCode4	1.3.6.1.4.1.161.19.3.2.1.101	integer	read-write	Fourth Color code.
colorCodepriority4	1.3.6.1.4.1.161.19.3.2.1.102	integer	read-write	Priority setting for the fourth color code. Enumeration: 'disable': 0, 'primary': 1, 'tertiary': 3, 'secondary': 2.
colorCode5	1.3.6.1.4.1.161.19.3.2.1.103	integer	read-write	Fifth Color code.
colorCodepriority5	1.3.6.1.4.1.161.19.3.2.1.104	integer	read-write	Priority setting for the fifth color code. Enumeration: 'disable': 0, 'primary': 1, 'tertiary': 3, 'secondary': 2.
colorCode6	1.3.6.1.4.1.161.19.3.2.1.105	integer	read-write	Sixth Color code.
colorCodepriority6	1.3.6.1.4.1.161.19.3.2.1.106	integer	read-write	Priority setting for the sixth color code. Enumeration: 'disable': 0, 'primary': 1, 'tertiary': 3, 'secondary': 2.
colorCode7	1.3.6.1.4.1.161.19.3.2.1.107	integer	read-write	Seventh Color code.
colorCodepriority7	1.3.6.1.4.1.161.19.3.2.1.108	integer	read-write	Priority setting for the seventh color code. Enumeration: 'disable': 0, 'primary': 1, 'tertiary': 3, 'secondary': 2.
colorCode8	1.3.6.1.4.1.161.19.3.2.1.109	integer	read-write	Eighth Color code.
colorCodepriority8	1.3.6.1.4.1.161.19.3.2.1.110	integer	read-write	Priority setting for the eighth color code. Enumeration: 'disable': 0, 'primary': 1, 'tertiary': 3, 'secondary': 2.
colorCode9	1.3.6.1.4.1.161.19.3.2.1.111	integer	read-write	Ninth Color code.
colorCodepriority9	1.3.6.1.4.1.161.19.3.2.1.112	integer	read-write	Priority setting for the ninth color code. Enumeration: 'disable': 0, 'primary': 1, 'tertiary': 3, 'secondary': 2.
colorCode10	1.3.6.1.4.1.161.19.3.2.1.113	integer	read-write	Tenth Color code.
colorCodepriority10	1.3.6.1.4.1.161.19.3.2.1.114	integer	read-write	Priority setting for the tenth color code. Enumeration: 'disable': 0, 'primary': 1, 'tertiary': 3, 'secondary': 2.
natDNSProxyEnable	1.3.6.1.4.1.161.19.3.2.1.115	integer	read-write	If enabled, the SM will advertise itself as the DNS server when it sends out DHCP client leases and forward DNS queries automatically. If disabled, the SM will forward on upstream DNS server information when it sends out DHCP client leases. Enumeration: 'disabled': 0, 'enabled': 1.
allIpv4Filter	1.3.6.1.4.1.161.19.3.2.1.116	integer	read-write	To set all IPv4 packet filter when NAT is disabled. Enabling this will automatically enable all of the known IP filters (SMB, SNMP, Bootp, IPv4 Mcast, User Defined Ports, and All Other IPv4). Obsolete - Use corresponding OID in whipsBoxConfig MIB. Enumeration: 'filterOn': 1, 'filterOff': 0.
spectrumAnalysisDisplay	1.3.6.1.4.1.161.19.3.2.1.117	integer	read-write	The display for Spectrum Analyzer: (0) - Averaging over entire period (1) - Instantaneous showing the last reading Enumeration: 'averaging': 0, 'instantaneous': 1.
syslogSMXmitSetting	1.3.6.1.4.1.161.19.3.2.1.118	integer	read-write	Obtains Syslog transmit configuration from AP/BHM if set to 0, overrides if 1 or 2. Transmits syslog data to Syslog server if enabled(1), stops if disabled (2). Enumeration: 'obtain-from-AP': 0, 'enable': 1, 'disable': 2.
syslogServerApPreferred	1.3.6.1.4.1.161.19.3.2.1.119	integer	read-write	Uses Syslog server configuration from AP/BHM if enabled and available, otherwise uses local configuration. Enumeration: 'use-AP-preferred': 1, 'use-local': 0.
syslogMinLevelApPreferred	1.3.6.1.4.1.161.19.3.2.1.120	integer	read-write	Uses Syslog minimum transmit level configuration from AP/BHM if available, otherwise uses local configuration. Enumeration: 'use-AP-preferred': 1, 'use-local': 0.
syslogSMXmitControl	1.3.6.1.4.1.161.19.3.2.1.121	integer	read-write	Obtains Syslog transmit configuration from AP/BHM if available, or specifies the local transmit state. Enumeration: 'obtain-from-AP-default-enabled': 1, 'enable': 3, 'disable': 2, 'obtain-from-AP-default-disabled': 0.
eapPeerAAAServerCommonName	1.3.6.1.4.1.161.19.3.2.1.126	displaystring	read-write	THIS OID IS CURRENTLY UNUSED: EAP Peer Server Common Name
rfScanListBandFilter	1.3.6.1.4.1.161.19.3.2.1.127	integer	read-write	This element is obsolete. Enumeration: 'band5700': 9, 'band5400': 8.
upLnkMaxBurstDataRate	1.3.6.1.4.1.161.19.3.2.1.128	integer	read-write	Maximum burst uplink rate.
dwnLnkMaxBurstDataRate	1.3.6.1.4.1.161.19.3.2.1.129	integer	read-write	Maximum burst downlink rate.
cyclicPrefixScan	1.3.6.1.4.1.161.19.3.2.1.130	displaystring	read-write	Cyclic Prefix value for frequency scanning used by MIMO SMs only. When setting use a comma delimited list of cyclic prefixes with no spaces. For example: 1/8,1/16
bandwidthScan	1.3.6.1.4.1.161.19.3.2.1.131	displaystring	read-write	Bandwidth values for frequency scanning used by MIMO SMs only. When setting use a comma delimited list of bandwidths. For example: 10, 20
apSelection	1.3.6.1.4.1.161.19.3.2.1.132	integer	read-write	This OID affects what AP to attempt to register to when Canopy SMs scan see more than one AP that are valid in it's configuration. (0) - Default, Canopy radios after scanning select the best AP that will optimize for estimated throughput. (1) - Select the AP with the best receive power level. Note this is only if multiple APs fit the current scan configuration, and will be overriden by color codes, RADIUS, etc. Enumeration: 'powerLevel': 1, 'optimizeForThroughput': 0.
radioBandscanConfig	1.3.6.1.4.1.161.19.3.2.1.133	integer	read-write	Used to determine when frequency, cyclic prefix and bandwidth settings take effect for band scanning MIMO SMs. 0 - Instant 1 - Delayed 2 - Apply changes Enumeration: 'apply': 2, 'instant': 0, 'delayed': 1.
forcepoweradjust	1.3.6.1.4.1.161.19.3.2.1.134	integer	read-write	This will force a multipoint SM to initiate an asynchronous power adjust sequence.
clearBerrResults	1.3.6.1.4.1.161.19.3.2.1.135	integer	read-write	This will clear the BERR results.
berrautoupdateflag	1.3.6.1.4.1.161.19.3.2.1.136	integer	read-write	This indicates if the once a second BERR updating of counters is enabled. 1 = enabled 0 = disabled
testSMBER	1.3.6.1.4.1.161.19.3.2.1.137	integer	read-write	0 - Disable (Return the SM to a normal operation state). 1 - Enable (Set SM into a BERR test state). Enumeration: 'enable': 1, 'disable': 0.
allowedIPAccessNMLength1	1.3.6.1.4.1.161.19.3.2.1.138	integer	read-write	Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed
allowedIPAccessNMLength2	1.3.6.1.4.1.161.19.3.2.1.139	integer	read-write	Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed
allowedIPAccessNMLength3	1.3.6.1.4.1.161.19.3.2.1.140	integer	read-write	Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed
naptRemoteManage	1.3.6.1.4.1.161.19.3.2.1.141	integer	read-write	To enable or disable Remote Management. For multipoint only. 0=Disable Remote Management, 1=Enable - Standalone Config, 2=Enable - Use WAN Interface. Enumeration: 'enable-wan': 2, 'disable': 0, 'enable-standalone': 1.
spectrumAnalysisScanBandwidth	1.3.6.1.4.1.161.19.3.2.1.142	integer	read-write	Scanning Bandwidth used for the Spectrum Analyzer. Only available on PMP 450. Enumeration: 'bandwidth10MHz': 1, 'bandwidth20MHz': 2, 'bandwidth5MHz': 0.
berDeModSelect	1.3.6.1.4.1.161.19.3.2.1.143	integer	read-write	The BER demodulation level the SM is set. 0 for QPSK, 1 for 16-QAM, 2 for 64-QAM, and 3 for 256-QAM. Enumeration: 'qpsk': 0, 'qam-256': 3, 'qam-64': 2, 'qam-16': 1.
multicastVCRcvRate	1.3.6.1.4.1.161.19.3.2.1.144	displaystring	read-only	Multicast VC Receive Rate
pmp430ApRegistrationOptions	1.3.6.1.4.1.161.19.3.2.1.145	integer	read-write	Selects AP types (430 and/or 450) that are available for the PMP430 SM. When both AP types are selected, if the SM does not register to an AP, it will reboot to scan the other AP type. Enumeration: 'both': 3, 'pmp450': 2, 'pmp430': 1.
switchRadioModeAndReboot	1.3.6.1.4.1.161.19.3.2.1.146	integer	read-write	Setting this to 1 will force switch the SM to the other radio mode and immediately reboot the unit. When the unit finishes rebooting, it will be in finishedReboot state. Only will be allowed to be set if both registration options are configured. PMP 430 SM only. Introduced in release 12.2. Enumeration: 'finishedReboot': 0, 'switchRadioModeAndReboot': 1.
whispSmStatus	1.3.6.1.4.1.161.19.3.2.2
sessionStatus	1.3.6.1.4.1.161.19.3.2.2.1	displaystring	read-only	SM registered or not.
rssi	1.3.6.1.4.1.161.19.3.2.2.2	integer	read-only	Radio signal strength index. FSK only.
jitter	1.3.6.1.4.1.161.19.3.2.2.3	gauge32	read-only	A measure of multipath interference. Applicable to FSK radios only.
airDelay	1.3.6.1.4.1.161.19.3.2.2.4	unsigned32	read-only	Round trip delay in bits.
radioSlicingSm	1.3.6.1.4.1.161.19.3.2.2.5	integer	read-only	This variable is deprecated.
radioTxGainSm	1.3.6.1.4.1.161.19.3.2.2.6	integer	read-only	Radio transmission gain setting. Applicable to FSK radios only.
calibrationStatus	1.3.6.1.4.1.161.19.3.2.2.7	displaystring	read-only	Varible deprecated. Please use calibrationStatusBox.
radioDbm	1.3.6.1.4.1.161.19.3.2.2.8	displaystring	read-only	Rx Power level. For MIMO this is the combined power of the horizontal and vertical paths.
registeredToAp	1.3.6.1.4.1.161.19.3.2.2.9	displaystring	read-only	AP MAC address that the SM registered to.
dhcpCip	1.3.6.1.4.1.161.19.3.2.2.10	ipaddress	read-only	Assigned IP address to DHCP client.
dhcpSip	1.3.6.1.4.1.161.19.3.2.2.11	ipaddress	read-only	Public DHCP server IP.
dhcpClientLease	1.3.6.1.4.1.161.19.3.2.2.12	timeticks	read-only	DHCP client lease time.
dhcpCSMask	1.3.6.1.4.1.161.19.3.2.2.13	ipaddress	read-only	Public DHCP server subnet mask.
dhcpDfltRterIP	1.3.6.1.4.1.161.19.3.2.2.14	ipaddress	read-only	Public default router IP address.
dhcpcdns1	1.3.6.1.4.1.161.19.3.2.2.15	ipaddress	read-only	Primary public domain name server.
dhcpcdns2	1.3.6.1.4.1.161.19.3.2.2.16	ipaddress	read-only	Secondary public domain name server.
dhcpcdns3	1.3.6.1.4.1.161.19.3.2.2.17	ipaddress	read-only	Third public domain name server.
dhcpDomName	1.3.6.1.4.1.161.19.3.2.2.18	displaystring	read-only	Public domain name server.
dhcpServerTable	1.3.6.1.4.1.161.19.3.2.2.19		no-access	The table of DHCP server hosts.
dhcpServerEntry	1.3.6.1.4.1.161.19.3.2.2.19.1		no-access	Entry of DHCP server hosts.
hostIp	1.3.6.1.4.1.161.19.3.2.2.19.1.1	ipaddress	read-only	DHCP server IP address.
hostMacAddress	1.3.6.1.4.1.161.19.3.2.2.19.1.2	physaddress	read-only	Private host MAC address.
hostLease	1.3.6.1.4.1.161.19.3.2.2.19.1.3	timeticks	read-only	Lease time assigned by DHCP server host.
adaptRate	1.3.6.1.4.1.161.19.3.2.2.20	displaystring	read-only	VC adapt rate.
radioDbmInt	1.3.6.1.4.1.161.19.3.2.2.21	integer	read-only	Radio power level(integer). For MIMO radios this is the combined power of the horiztontal and vertical paths.
dfsStatus	1.3.6.1.4.1.161.19.3.2.2.22	displaystring	read-only	Dynamic frequency shifting status. For DFS Radio only.
radioTxPwr	1.3.6.1.4.1.161.19.3.2.2.23	displaystring	read-only	Tx Power level. Valid for FSK and OFDM SMs.
activeRegion	1.3.6.1.4.1.161.19.3.2.2.24	displaystring	read-only	The active region of the radio.
snmpBerLevel	1.3.6.1.4.1.161.19.3.2.2.25	integer	read-only	BER level. For PMP450 systems: 2=MIMO QPSK, 4=MIMO 16-QAM, 6=MIMO64-QAM, 8=256-QAM For non PMP450: 2=2 level BER, 4=4 level BER. Enumeration: 'mimo256QAM': 8, 'mimo64QAM': 6, 'fourLevelOrMimo16QAM': 4, 'twoLevelOrMimoQPSK': 2.
nbBitsRcvd	1.3.6.1.4.1.161.19.3.2.2.26	counter64	read-only	Number of BER bits received (non MIMO platforms only).
nbPriBitsErr	1.3.6.1.4.1.161.19.3.2.2.27	counter32	read-only	Number of Primary bit errors (non MIMO platforms only).
nbSndBitsErr	1.3.6.1.4.1.161.19.3.2.2.28	counter32	read-only	Number of secondary bit errors (non MIMO platforms only).
primaryBER	1.3.6.1.4.1.161.19.3.2.2.29	integer	read-only	Obsoleted, invalid type to represent this data. Measured Primary Bit Error Rate.
secondaryBER	1.3.6.1.4.1.161.19.3.2.2.30	integer	read-only	Obsoleted, invalid type to represent this data. Measured Secondary Bit Error Rate.
totalBER	1.3.6.1.4.1.161.19.3.2.2.31	integer	read-only	Obsoleted, invalid type to represent this data. Measured Total Bit Error Rate.
minRSSI	1.3.6.1.4.1.161.19.3.2.2.32	integer	read-only	Measured Min. RSSI. Applicable to FSK radios only.
maxRSSI	1.3.6.1.4.1.161.19.3.2.2.33	integer	read-only	Measured Max. RSSI. Applicable to FSK radios only.
minJitter	1.3.6.1.4.1.161.19.3.2.2.34	gauge32	read-only	Measured Min. Jitter. Applicable to FSK radios only.
maxJitter	1.3.6.1.4.1.161.19.3.2.2.35	gauge32	read-only	Measured Max. Jitter. Applicable to FSK radios only.
smSessionTimer	1.3.6.1.4.1.161.19.3.2.2.36	timeticks	read-only	SM current session timer.
pppoeSessionStatus	1.3.6.1.4.1.161.19.3.2.2.37	displaystring	read-only	Current PPPoE Session Status
pppoeSessionID	1.3.6.1.4.1.161.19.3.2.2.38	integer	read-only	Current PPPoE Session ID
pppoeIPCPAddress	1.3.6.1.4.1.161.19.3.2.2.39	ipaddress	read-only	Current PPPoE IPCP IP Address
pppoeMTUOverrideEn	1.3.6.1.4.1.161.19.3.2.2.40	integer	read-only	Current PPPoE MTU Override Setting Enumeration: 'disabled': 0, 'enabled': 1.
pppoeMTUValue	1.3.6.1.4.1.161.19.3.2.2.41	integer	read-only	Current PPPoE MTU Value
pppoeTimerTypeValue	1.3.6.1.4.1.161.19.3.2.2.42	integer	read-only	Current PPPoE Timer Type. 0 is disabled, 1 is Keep Alive timer, and 2 is Idle Timeout timer. Enumeration: 'disabled': 0, 'idleTimeout': 2, 'keepAlive': 1.
pppoeTimeoutValue	1.3.6.1.4.1.161.19.3.2.2.43	integer	read-only	Current PPPoE Timeout Period. The use of this depends on the Timer Type. If the Timer Type is KeepAlive, then the timeout period is in seconds. If the Timer Type is Idle Timeout, then the timeout period is in minutes.
pppoeDNSServer1	1.3.6.1.4.1.161.19.3.2.2.44	ipaddress	read-only	PPPoE DNS Server 1
pppoeDNSServer2	1.3.6.1.4.1.161.19.3.2.2.45	ipaddress	read-only	PPPoE DNS Server 2
pppoeControlBytesSent	1.3.6.1.4.1.161.19.3.2.2.46	counter32	read-only	PPPoE Control Bytes Sent
pppoeControlBytesReceived	1.3.6.1.4.1.161.19.3.2.2.47	counter32	read-only	PPPoE Control Bytes Received
pppoeDataBytesSent	1.3.6.1.4.1.161.19.3.2.2.48	counter32	read-only	PPPoE Data Bytes Sent
pppoeDataBytesReceived	1.3.6.1.4.1.161.19.3.2.2.49	counter32	read-only	PPPoE Data Bytes Received
pppoeEnabledStatus	1.3.6.1.4.1.161.19.3.2.2.50	integer	read-only	PPPoE Enabled Enumeration: 'disabled': 0, 'enabled': 1.
pppoeTCPMSSClampEnableStatus	1.3.6.1.4.1.161.19.3.2.2.51	integer	read-only	PPPoE TCP MSS Clamping Enable Enumeration: 'disabled': 0, 'enabled': 1.
pppoeACNameStatus	1.3.6.1.4.1.161.19.3.2.2.52	displaystring	read-only	Current PPPoE Access Concentrator In Use
pppoeSvcNameStatus	1.3.6.1.4.1.161.19.3.2.2.53	displaystring	read-only	Current PPPoE Service Name In Use
pppoeSessUptime	1.3.6.1.4.1.161.19.3.2.2.54	timeticks	read-only	Uptime of current PPPoE Session in ticks
primaryBERDisplay	1.3.6.1.4.1.161.19.3.2.2.55	displaystring	read-only	Measured Primary Bit Error Rate. Non MIMO platforms only.
secondaryBERDisplay	1.3.6.1.4.1.161.19.3.2.2.56	displaystring	read-only	Measured Secondary Bit Error Rate. FSK platforms only.
totalBERDisplay	1.3.6.1.4.1.161.19.3.2.2.57	displaystring	read-only	Measured Total Bit Error Rate. For MIMO this is combined both paths.
minRadioDbm	1.3.6.1.4.1.161.19.3.2.2.58	integer	read-only	Maximum receive power of beacon in dBm. For MIMO radios, this is only available in the vertical path.
maxRadioDbm	1.3.6.1.4.1.161.19.3.2.2.59	integer	read-only	Maximum receive power of beacon in dBm. For MIMO radios, this is only available in the vertical path.
pppoeSessIdleTime	1.3.6.1.4.1.161.19.3.2.2.60	timeticks	read-only	Idle Time of current PPPoE Session in ticks
radioDbmAvg	1.3.6.1.4.1.161.19.3.2.2.61	integer	read-only	Average Receive Power of the AP's beacon in dBm. OFDM Radios only. For MIMO this is only the verical path, as the beacon is not transmitted on horizontal.
zoltarFPGAFreqOffset	1.3.6.1.4.1.161.19.3.2.2.62	integer	read-only	FPGA peek of 70001088
zoltarSWFreqOffset	1.3.6.1.4.1.161.19.3.2.2.63	integer	read-only	FPGA peek of 7000108C
airDelayns	1.3.6.1.4.1.161.19.3.2.2.64	unsigned32	read-only	Round trip delay in nanoseconds.
currentColorCode	1.3.6.1.4.1.161.19.3.2.2.65	integer	read-only	The current Color Code of the Registered AP/BHM. A value of -1 is return when the device is not registered.
currentColorCodePri	1.3.6.1.4.1.161.19.3.2.2.66	integer	read-only	The current priority of the Registered color code Enumeration: 'none': 0, 'primary': 1, 'tertiary': 3, 'secondary': 2.
currentChanFreq	1.3.6.1.4.1.161.19.3.2.2.67	unsigned32	read-only	The Current Channel Frequency of the AP/BHM when in session.
linkQualityBeacon	1.3.6.1.4.1.161.19.3.2.2.68	displaystring	read-only	Engineering only. Link Quality for incoming beacons. For Gen II OFDM radios and forward. For PMP450 and forward this is vertical path.
dhcpServerPktXmt	1.3.6.1.4.1.161.19.3.2.2.72	counter32	read-only	Number of packets transmitted by SM DHCP Server
dhcpServerPktRcv	1.3.6.1.4.1.161.19.3.2.2.73	counter32	read-only	Number of packets received by SM DHCP Server
dhcpServerPktToss	1.3.6.1.4.1.161.19.3.2.2.74	counter32	read-only	Number of packets tossed by SM DHCP Server
receiveFragmentsModulationPercentage	1.3.6.1.4.1.161.19.3.2.2.86	displaystring	read-only	Engineering use only. The percentage of recent fragments received at which modulation. For Gen II OFDM only and forward.
fragmentsReceived1XVertical	1.3.6.1.4.1.161.19.3.2.2.87	counter32	read-only	Engineering use only. Number of fragments received in 1x modulation. For GenII OFDM only and forward. For MIMO this is the vertical path.
fragmentsReceived2XVertical	1.3.6.1.4.1.161.19.3.2.2.88	counter32	read-only	Engineering use only. Number of fragments received in 2x modulation. For GenII OFDM only and forward. For MIMO this is the vertical path.
fragmentsReceived3XVertical	1.3.6.1.4.1.161.19.3.2.2.89	counter32	read-only	Engineering use only. Number of fragments received in 3x modulation. For GenII OFDM only and forward. For MIMO this is the vertical path.
fragmentsReceived4XVertical	1.3.6.1.4.1.161.19.3.2.2.90	counter32	read-only	Engineering use only. Number of fragments received in 4x modulation. For GenII OFDM only and forward. For MIMO this is the vertical path.
linkQualityData1XVertical	1.3.6.1.4.1.161.19.3.2.2.91	displaystring	read-only	Engineering use only. Link Quality for the data VC for QPSK modulation (1X). For Gen II OFDM radios and forward only. For MIMO this is the vertical path.
linkQualityData2XVertical	1.3.6.1.4.1.161.19.3.2.2.92	displaystring	read-only	Engineering use only. Link Quality for the data VC for 16-QAM modulation (2X). For Gen II OFDM radios and forward only. For MIMO this is the vertical path.
linkQualityData3XVertical	1.3.6.1.4.1.161.19.3.2.2.93	displaystring	read-only	Engineering use only. Link Quality for the data VC for 64-QAM modulation (3X). For Gen II OFDM radios and forward only. For MIMO this is the vertical path.
linkQualityData4XVertical	1.3.6.1.4.1.161.19.3.2.2.94	displaystring	read-only	Engineering use only. Link Quality for the data VC for 256-QAM modulation (4X). For Gen II OFDM radios and forward only. For MIMO this is the vertical path.
signalToNoiseRatioSMVertical	1.3.6.1.4.1.161.19.3.2.2.95	integer	read-only	An estimated signal to noise ratio based on the last received data. For GenII OFDM only and forward. For MIMO this is the vertical antenna. Will return zero if Signal to Noise Ratio Calculation is disabled.
rfStatTxSuppressionCount	1.3.6.1.4.1.161.19.3.2.2.96	counter32	read-only	RF Scheduler Stats DFS TX Suppression Count
bridgecbUplinkCreditRate	1.3.6.1.4.1.161.19.3.2.2.97	unsigned32	read-only	Sustained uplink data rate.
bridgecbUplinkCreditLimit	1.3.6.1.4.1.161.19.3.2.2.98	unsigned32	read-only	Uplink Burst Allocation.
bridgecbDownlinkCreditRate	1.3.6.1.4.1.161.19.3.2.2.99	unsigned32	read-only	Sustained uplink data rate.
bridgecbDownlinkCreditLimit	1.3.6.1.4.1.161.19.3.2.2.100	unsigned32	read-only	Uplink Burst Allocation.
mimoQpskBerDisplay	1.3.6.1.4.1.161.19.3.2.2.101	displaystring	read-only	QPSK BER statistics. MIMO platforms only.
mimo16QamBerDisplay	1.3.6.1.4.1.161.19.3.2.2.102	displaystring	read-only	16-QAM BER statistics MIMO platforms only. Engineering use only.
mimo64QamBerDisplay	1.3.6.1.4.1.161.19.3.2.2.103	displaystring	read-only	64-QAM BER statistics MIMO platforms only. Engineering use only.
mimo256QamBerDisplay	1.3.6.1.4.1.161.19.3.2.2.104	displaystring	read-only	256-QAM BER statistics MIMO platforms only. Engineering use only.
mimoBerRcvModulationType	1.3.6.1.4.1.161.19.3.2.2.105	displaystring	read-only	Receive modulation type. MIMO platforms only.
signalToNoiseRatioSMHorizontal	1.3.6.1.4.1.161.19.3.2.2.106	integer	read-only	An estimated signal to noise ratio based on the last received data for horizontal antenna. MIMO radios only. Will return zero if Signal to Noise Ratio Calculation is disabled.
maxRadioDbmDeprecated	1.3.6.1.4.1.161.19.3.2.2.107	integer	read-only	This OID was inadvertently moved in 12.0.2. Please use maxRadioDbm. This OID is deprecated and kept for backwards compatibility.
signalStrengthRatio	1.3.6.1.4.1.161.19.3.2.2.108	displaystring	read-only	Signal Strength Ratio in dB is the power received by the vertical antenna input (dB) - power received by the horizontal antenna input (dB). MIMO radios only.
fragmentsReceived1XHorizontal	1.3.6.1.4.1.161.19.3.2.2.109	counter32	read-only	Engineering use only. Number of fragments received in 1x modulation. For MIMO radios only. For MIMO this is the horizontal path.
fragmentsReceived2XHorizontal	1.3.6.1.4.1.161.19.3.2.2.110	counter32	read-only	Engineering use only. Number of fragments received in 2x modulation. For MIMO radios only. For MIMO this is the horizontal path.
fragmentsReceived3XHorizontal	1.3.6.1.4.1.161.19.3.2.2.111	counter32	read-only	Engineering use only. Number of fragments received in 3x modulation. For MIMO radios only. For MIMO this is the horizontal path.
fragmentsReceived4XHorizontal	1.3.6.1.4.1.161.19.3.2.2.112	counter32	read-only	Engineering use only. Number of fragments received in 4x modulation. For MIMO radios only. For MIMO this is the horizontal path.
linkQualityData1XHorizontal	1.3.6.1.4.1.161.19.3.2.2.113	displaystring	read-only	Engineering use only. Link Quality for the data VC for QPSK modulation (1X). For MIMO radios only. For MIMO this is the horizontal path.
linkQualityData2XHorizontal	1.3.6.1.4.1.161.19.3.2.2.114	displaystring	read-only	Engineering use only. Link Quality for the data VC for 16-QAM modulation (2X). For MIMO radios only. For MIMO this is the horizontal path.
linkQualityData3XHorizontal	1.3.6.1.4.1.161.19.3.2.2.115	displaystring	read-only	Engineering use only. Link Quality for the data VC for 64-QAM modulation (3X). For MIMO radios only. For MIMO this is the horizontal path.
linkQualityData4XHorizontal	1.3.6.1.4.1.161.19.3.2.2.116	displaystring	read-only	Engineering use only. Link Quality for the data VC for 256-QAM modulation (4X). For MIMO radios only. For MIMO this is the horizontal path.
radioDbmHorizontal	1.3.6.1.4.1.161.19.3.2.2.117	displaystring	read-only	Receive power level of the horizontal antenna in dBm. MIMO radios only.
radioDbmVertical	1.3.6.1.4.1.161.19.3.2.2.118	displaystring	read-only	Receive power level of the vertical antenna in dBm. MIMO radios only.
bridgecbDownlinkMaxBurstBitRate	1.3.6.1.4.1.161.19.3.2.2.119	unsigned32	read-only	Maximum burst downlink rate.
bridgecbUplinkMaxBurstBitRate	1.3.6.1.4.1.161.19.3.2.2.120	unsigned32	read-only	Maximum burst uplink Rate.
currentCyclicPrefix	1.3.6.1.4.1.161.19.3.2.2.121	integer	read-only	The Current Cyclic Prefix of the AP/BHM when in session. Enumeration: 'one-quarter': 0, 'one-eighth': 1, 'one-sixteenth': 2.
currentBandwidth	1.3.6.1.4.1.161.19.3.2.2.122	integer	read-only	The Current Bandwidth of the AP/BHM when in session. Enumeration: 'bandwidth10mhz': 3, 'bandwidth20mhz': 5, 'bandwidth5mhz': 1.
berPwrRxFPGAPathA	1.3.6.1.4.1.161.19.3.2.2.123	integer	read-only	BER power level on FPGA Rx Path A of SM.
berPwrRxFPGAPathB	1.3.6.1.4.1.161.19.3.2.2.124	integer	read-only	BER power level on FPGA Rx Path B of SM.
rawBERPwrRxPathA	1.3.6.1.4.1.161.19.3.2.2.125	integer	read-only	Raw unadjusted BER power level on FPGA Rx Path A of SM.
rawBERPwrRxPathB	1.3.6.1.4.1.161.19.3.2.2.126	integer	read-only	Raw unadjusted BER power level on FPGA Rx Path B of SM.
radioModeStatus	1.3.6.1.4.1.161.19.3.2.2.127	integer	read-only	The current radio mode that SM is operating in. PMP 430 SMs only. Introduced in release 12.2. Enumeration: 'pmp450Interoperability': 2, 'undefined': 0, 'pmp430': 1.
adaptRateLowPri	1.3.6.1.4.1.161.19.3.2.2.128	integer	read-only	The current transmitting rate of the low priority VC. 0 : SM is not in session 1 : 1X QPSK SISO 2 : 2X 16-QAM SISO or QPSK MIMO 3 : 3X 64-QAM SISO 4 : 4X 256-QAM SISO or 16-QAM MIMO 6 : 6X 64-QAM MIMO 8 : 8X 256-QAM MIMO Enumeration: 'rete3X': 3, 'rate6X': 6, 'rate1X': 1, 'rate2X': 2, 'rate8X': 8, 'noSession': 0, 'rate4X': 4.
adaptRateHighPri	1.3.6.1.4.1.161.19.3.2.2.129	integer	read-only	The current transmitting rate of the high priority VC. -1 : High Priority Channel not configured 0 : SM is not in session 1 : 1X QPSK SISO 2 : 2X 16-QAM SISO or QPSK MIMO 3 : 3X 64-QAM SISO 4 : 4X 256-QAM SISO or 16-QAM MIMO 6 : 6X 64-QAM MIMO 8 : 8X 256-QAM MIMO Enumeration: 'rete3X': 3, 'rate6X': 6, 'rate1X': 1, 'rate2X': 2, 'rate8X': 8, 'noHighPriorityChannel': -1, 'noSession': 0, 'rate4X': 4.
bitErrorsQSPKpathA	1.3.6.1.4.1.161.19.3.2.2.130	counter64	read-only	Number of bit errors received from BER packet at QPSK path A. Valid MIMO platforms only.
bitErrorsQSPKpathB	1.3.6.1.4.1.161.19.3.2.2.131	counter64	read-only	Number of bit errors received from BER packet at QPSK path B. Valid MIMO platforms only.
bitErrors16QAMpathA	1.3.6.1.4.1.161.19.3.2.2.132	counter64	read-only	Number of bit errors received from BER packet at 16-QAM path A. Valid MIMO platforms only. Engineering use only.
bitErrors16QAMpathB	1.3.6.1.4.1.161.19.3.2.2.133	counter64	read-only	Number of bit errors received from BER packet at 16-QAM path B. Valid MIMO platforms only. Engineering use only.
bitErrors64QAMpathA	1.3.6.1.4.1.161.19.3.2.2.134	counter64	read-only	Number of bit errors received from BER packet at 64-QAM path A. Valid MIMO platforms only. Engineering use only.
bitErrors64QAMpathB	1.3.6.1.4.1.161.19.3.2.2.135	counter64	read-only	Number of bit errors received from BER packet at 64-QAM path B. Valid MIMO platforms only. Engineering use only.
bitErrors256QAMpathA	1.3.6.1.4.1.161.19.3.2.2.136	counter64	read-only	Number of bit errors received from BER packet at 256-QAM path A. Valid MIMO platforms only. Engineering use only.
bitErrors256QAMpathB	1.3.6.1.4.1.161.19.3.2.2.137	counter64	read-only	Number of bit errors received from BER packet at 256-QAM path B. Valid MIMO platforms only. Engineering use only.
bitsReceivedPerPathModulation	1.3.6.1.4.1.161.19.3.2.2.138	counter64	read-only	Number of bit received from BER. To calculate Bit Error Rate, take bit errors at a modulation and path and divide by this OID. To get combined BER add errors and divide by this multiplied by each path and modulation. i.e. MIMO QPSK combined BER = ((errors on path A) + (errors on path B))/(bits recieved per path modulation * 2) Valid MIMO platforms only.
whispSmGroups	1.3.6.1.4.1.161.19.3.2.3
whispSmConfigGroup	1.3.6.1.4.1.161.19.3.2.3.1			Canopy Subscriber Module configuration group.
whispSmStatusGroup	1.3.6.1.4.1.161.19.3.2.3.2			Canopy Subscriber Module status group.
whispSmNotifGroup	1.3.6.1.4.1.161.19.3.2.3.3			WHiSP SMs notification group.
whispMappingTableGroup	1.3.6.1.4.1.161.19.3.2.3.4			Canopy SM NAT port mapping Table group.
whispSmEvent	1.3.6.1.4.1.161.19.3.2.4
whispSmDfsEvent	1.3.6.1.4.1.161.19.3.2.4.1
whispRadarDetected	1.3.6.1.4.1.161.19.3.2.4.1.1			Radar detected transmit stopped.
whispRadarEnd	1.3.6.1.4.1.161.19.3.2.4.1.2			Radar ended back to normal transmit.
whispSmSpAnEvent	1.3.6.1.4.1.161.19.3.2.4.2
enterSpectrumAnalysis	1.3.6.1.4.1.161.19.3.2.4.2.1			Entering spectrum analysis. physAddress - MAC address of the SM
availableSpectrumAnalysis	1.3.6.1.4.1.161.19.3.2.4.2.2			Spectrum analysis is complete, SM is re-registered with AP and results are available. physAddress - MAC address of the SM
whispSmDHCPClientEvent	1.3.6.1.4.1.161.19.3.2.4.3
smNatWanDHCPClientEvent	1.3.6.1.4.1.161.19.3.2.4.3.1			NAT WAN DHCP Client has received a new address via DHCP.
smNatRFPubDHCPClientEvent	1.3.6.1.4.1.161.19.3.2.4.3.2			NAT RF Public DHCP Client has received a new address via DHCP.
whispMappingTable	1.3.6.1.4.1.161.19.3.2.5		no-access	NAT port mapping information table.
whispMappingEntry	1.3.6.1.4.1.161.19.3.2.5.1		no-access	Mapping table entry.
tableIndex	1.3.6.1.4.1.161.19.3.2.5.1.1	integer	read-only	User information table index.
protocol	1.3.6.1.4.1.161.19.3.2.5.1.2	integer	read-write	Protocol type: 0:both UDP and TCP, 1:UDP, 2:TCP.
port	1.3.6.1.4.1.161.19.3.2.5.1.3	integer	read-write	Application port number. e.g. 23=telnet, 21=ftp etc. Should be a positive integer.
localIp	1.3.6.1.4.1.161.19.3.2.5.1.4	ipaddress	read-write	IP of local host to which the incoming packet mapped to an application should be forwarded.
whispSmTranslationTable	1.3.6.1.4.1.161.19.3.2.6		no-access	Translation Table.
whispSmTranslationTableEntry	1.3.6.1.4.1.161.19.3.2.6.1		no-access	Translation Table Entry.
whispTranslationTableIndex	1.3.6.1.4.1.161.19.3.2.6.1.1	integer	read-only	Index into translation table.
whispTranslationTableMacAddr	1.3.6.1.4.1.161.19.3.2.6.1.2	macaddress	read-only	MAC Address of the registered enity.
whispTranslationTableIpAddr	1.3.6.1.4.1.161.19.3.2.6.1.3	ipaddress	read-only	Ip Address of the registered entity.
whispTranslationTableAge	1.3.6.1.4.1.161.19.3.2.6.1.4	counter32	read-only	Age of the registered entity.
whispSmSecurity	1.3.6.1.4.1.161.19.3.2.7
certTable	1.3.6.1.4.1.161.19.3.2.7.1		no-access	The table of CA Certificates on SM.
certEntry	1.3.6.1.4.1.161.19.3.2.7.1.1		no-access	Entry of Certifcates.
certIndex	1.3.6.1.4.1.161.19.3.2.7.1.1.1	integer	read-only	User information table index.
cert	1.3.6.1.4.1.161.19.3.2.7.1.1.2	integer	read-only	0: Inactive 1: Active Enumeration: 'active': 1, 'inactive': 0.
action	1.3.6.1.4.1.161.19.3.2.7.1.1.3	integer	read-write	0: No Operation 1: Delete Certificate Enumeration: 'noop': 0, 'delete': 1.
certificateDN	1.3.6.1.4.1.161.19.3.2.7.1.1.4	displaystring	read-only	Distinguished Name of Certificate 2
numAuthCerts	1.3.6.1.4.1.161.19.3.2.7.2	integer	read-only	can have a max value of 2
authenticationEnforce	1.3.6.1.4.1.161.19.3.2.7.3	integer	read-write	enforce SM to register with specifed Auth Enabled AP Enumeration: 'presharedkey': 2, 'disable': 0, 'aaa': 1.
phase1	1.3.6.1.4.1.161.19.3.2.7.4	integer	read-write	Select the outer method for EAP Authentication Enumeration: 'eapttls': 0, 'eapMSChapV2': 1.
phase2	1.3.6.1.4.1.161.19.3.2.7.5	integer	read-write	Select the outer method for EAP Authentication Enumeration: 'pap': 0, 'chap': 1, 'mschapv2': 2.
authOuterId	1.3.6.1.4.1.161.19.3.2.7.6	octet string	read-write	EAP Peer Username
authPassword	1.3.6.1.4.1.161.19.3.2.7.7	displaystring	read-write	EAP Peer password
authUsername	1.3.6.1.4.1.161.19.3.2.7.8	displaystring	read-write	EAP Peer Identity
useRealm	1.3.6.1.4.1.161.19.3.2.7.9	integer	read-write	Enable or disable the use of realm option. Enumeration: 'enable': 1, 'disable': 0.
realm	1.3.6.1.4.1.161.19.3.2.7.10	displaystring	read-write	EAP Peer Realm
whispSmControls	1.3.6.1.4.1.161.19.3.2.8
clearLinkStats	1.3.6.1.4.1.161.19.3.2.8.1	integer	read-write	Setting this to a nonzero value will clear the link stats.