WHISP-BOX-MIBV2-MIB: View SNMP OID List / Download MIB

VENDOR: MOTOROLA


 Home MIB: WHISP-BOX-MIBV2-MIB
Download as:   
SNMPv2-CONF, WHISP-GLOBAL-REG-MIB, WHISP-TCV2-MIB, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 whispBoxLevelMibModule 1.3.6.1.4.1.161.19.1.1.8
This module contains generic Box-Level MIB definitions for Canopy Radios.
 whispBoxStatus 1.3.6.1.4.1.161.19.3.3.1
     whispBoxSoftwareVer 1.3.6.1.4.1.161.19.3.3.1.1 displaystring read-only
Version of software. Should be noted in the event customer has technical difficulties and need to contact technical support.
     whispBoxFPGAVer 1.3.6.1.4.1.161.19.3.3.1.2 displaystring read-only
Version of FPGA.
     whispBoxEsn 1.3.6.1.4.1.161.19.3.3.1.3 displaystring read-only
Electronic serial number(MAC address) assigned to Radio.
     whispBoxBoot 1.3.6.1.4.1.161.19.3.3.1.4 displaystring read-only
Software boot version.
     boxTemperature 1.3.6.1.4.1.161.19.3.3.1.5 displaystring read-only
Radio temperature.
     boxDeviceType 1.3.6.1.4.1.161.19.3.3.1.6 displaystring read-only
The type of the device.
     boxDeviceTypeID 1.3.6.1.4.1.161.19.3.3.1.7 displaystring read-only
Device type ID.
     boxEncryption 1.3.6.1.4.1.161.19.3.3.1.8 displaystring read-only
Device encryption type.
     etherLinkStatus 1.3.6.1.4.1.161.19.3.3.1.9 displaystring read-only
Ethernet link status.
     boxFrequency 1.3.6.1.4.1.161.19.3.3.1.10 displaystring read-only
Frequency band of the device.
     platformVer 1.3.6.1.4.1.161.19.3.3.1.11 integer read-only
Hardware platform version. For internal use.
     platformType 1.3.6.1.4.1.161.19.3.3.1.12 displaystring read-only
Platform type: Canopy, Canopy Lite, Canopy Lite - Advantage, Advantage, Russian, Russian - Advantage.
     dhcpLanIp 1.3.6.1.4.1.161.19.3.3.1.13 ipaddress read-only
LAN interface IP obtained through DHCP.
     dhcpLanSubnetMask 1.3.6.1.4.1.161.19.3.3.1.14 ipaddress read-only
LAN interface Subnet Mask obtained through DHCP.
     dhcpLanGateway 1.3.6.1.4.1.161.19.3.3.1.15 ipaddress read-only
LAN interface Gateway obtained through DHCP.
     dhcpRfPublicIp 1.3.6.1.4.1.161.19.3.3.1.16 ipaddress read-only
RF Public interface IP obtained through DHCP.
     dhcpRfPublicSubnetMask 1.3.6.1.4.1.161.19.3.3.1.17 ipaddress read-only
RF Public interface Subnet Mask obtained through DHCP.
     dhcpRfPublicGateway 1.3.6.1.4.1.161.19.3.3.1.18 ipaddress read-only
RF Public interface Gateway obtained through DHCP.
     lanDhcpStatus 1.3.6.1.4.1.161.19.3.3.1.19 displaystring read-only
Display LAN interface current DHPC status.
     rfPublicDhcpStatus 1.3.6.1.4.1.161.19.3.3.1.20 displaystring read-only
Display RF Public interface current DHPC status.
     inSyncCount 1.3.6.1.4.1.161.19.3.3.1.21 integer read-only
Counter for number of In Synchronization.
     outSyncCount 1.3.6.1.4.1.161.19.3.3.1.22 integer read-only
Counter for number of Out of Synchronization.
     pllOutLockCount 1.3.6.1.4.1.161.19.3.3.1.23 integer read-only
Counter for number of PLL out of Lock.
     txCalFailure 1.3.6.1.4.1.161.19.3.3.1.24 integer read-only
Counter for number of TX Calibration failure.
     swVersion 1.3.6.1.4.1.161.19.3.3.1.25 displaystring read-only
Software version information.
     pldVersion 1.3.6.1.4.1.161.19.3.3.1.26 displaystring read-only
PLD version information.
     platformInfo 1.3.6.1.4.1.161.19.3.3.1.27 displaystring read-only
Platform information.
     antPolarization 1.3.6.1.4.1.161.19.3.3.1.28 displaystring read-only
Antenna polarization for FSK radios.
     packetOverloadCounter 1.3.6.1.4.1.161.19.3.3.1.29 counter32 read-only
Total packet overload count.
     whispBoxP11Personality 1.3.6.1.4.1.161.19.3.3.1.30 displaystring read-only
Board Personality Configuration of P11 and P12 radios.
     whispBoxP11FPGAType 1.3.6.1.4.1.161.19.3.3.1.31 displaystring read-only
FPGA Type on P11 and P12 radios.
     whispBoxP11BstrapFPGAVer 1.3.6.1.4.1.161.19.3.3.1.32 displaystring read-only
P11 Bootstrap FPGA Version.
     numDFSDetections 1.3.6.1.4.1.161.19.3.3.1.33 counter32 read-only
Number of DFS/LBT Detections since last boot.
     rxOverrunPkts 1.3.6.1.4.1.161.19.3.3.1.34 counter32 read-only
Counter for number of received overrun packets error.
     boxTemperatureC 1.3.6.1.4.1.161.19.3.3.1.35 integer read-only
Radio temperature in Celsius.
     boxTemperatureF 1.3.6.1.4.1.161.19.3.3.1.36 integer read-only
Radio temperature in Fahrenheit.
     bridgeCbFecStatbin 1.3.6.1.4.1.161.19.3.3.1.37 counter32 read-only
Bridge CB FEC Stats bin
     bridgeCbFecStatbout 1.3.6.1.4.1.161.19.3.3.1.38 counter32 read-only
Bridge CB FEC Stats bout
     bridgeCbFecStatbtoss 1.3.6.1.4.1.161.19.3.3.1.39 counter32 read-only
Bridge CB FEC Stats btoss
     bridgeCbFecStatbtosscap 1.3.6.1.4.1.161.19.3.3.1.40 counter32 read-only
Bridge CB FEC Stats btosscap
     bridgeCbFecStatuin 1.3.6.1.4.1.161.19.3.3.1.41 counter32 read-only
Bridge CB FEC Stats uin
     bridgeCbFecStatuout 1.3.6.1.4.1.161.19.3.3.1.42 counter32 read-only
Bridge CB FEC Stats uout
     bridgeCbFecStatutoss 1.3.6.1.4.1.161.19.3.3.1.43 counter32 read-only
Bridge CB FEC Stats utoss
     bridgeCbFecStatutosscap 1.3.6.1.4.1.161.19.3.3.1.44 counter32 read-only
Bridge CB FEC Stats utosscap
     bridgeCbRFStatbin 1.3.6.1.4.1.161.19.3.3.1.45 counter32 read-only
Bridge CB RF Stats bin
     bridgeCbRFStatbout 1.3.6.1.4.1.161.19.3.3.1.46 counter32 read-only
Bridge CB RF Stats bout
     bridgeCbRFStatbtoss 1.3.6.1.4.1.161.19.3.3.1.47 counter32 read-only
Bridge CB RF Stats btoss
     bridgeCbRFStatbtosscap 1.3.6.1.4.1.161.19.3.3.1.48 counter32 read-only
Bridge CB RF Stats btosscap
     bridgeCbRFStatuin 1.3.6.1.4.1.161.19.3.3.1.49 counter32 read-only
Bridge CB RF Stats uin
     bridgeCbRFStatuout 1.3.6.1.4.1.161.19.3.3.1.50 counter32 read-only
Bridge CB RF Stats uout
     bridgeCbRFStatutoss 1.3.6.1.4.1.161.19.3.3.1.51 counter32 read-only
Bridge CB RF Stats utoss
     bridgeCbRFStatutosscap 1.3.6.1.4.1.161.19.3.3.1.52 counter32 read-only
Bridge CB RF Stats utosscap
     bridgeCbErrStatNI1QSend 1.3.6.1.4.1.161.19.3.3.1.53 counter32 read-only
Bridge CB Error Stats ErrNI1QSend
     bridgeCbErrStatNI2QSend 1.3.6.1.4.1.161.19.3.3.1.54 counter32 read-only
Bridge CB Error Stats ErrNI2QSend
     bridgeCbErrStatBridgeFull 1.3.6.1.4.1.161.19.3.3.1.55 counter32 read-only
Bridge CB Error Stats BridgeFull
     bridgeCbErrStatSendMsg 1.3.6.1.4.1.161.19.3.3.1.56 counter32 read-only
Bridge CB Error Stats SendMsg
     bridgeCbErrStatAPFecQSend 1.3.6.1.4.1.161.19.3.3.1.57 counter32 read-only
Bridge CB Error Stats APFecQSend
     bridgeCbErrStatApRfQSend 1.3.6.1.4.1.161.19.3.3.1.58 counter32 read-only
Bridge CB Error Stats ApRfQSend
     rfStatXmtUDataCnt 1.3.6.1.4.1.161.19.3.3.1.59 counter32 read-only
RF Scheduler Stats Transmit Unicast Data Count
     rfStatXmtBDataCnt 1.3.6.1.4.1.161.19.3.3.1.60 counter32 read-only
RF Scheduler Stats Transmit Broadcast Data Count
     rfStatRcvUDataCnt 1.3.6.1.4.1.161.19.3.3.1.61 counter32 read-only
RF Scheduler Stats Receive Unicast Data Count
     rfStatRcvBDataCnt 1.3.6.1.4.1.161.19.3.3.1.62 counter32 read-only
RF Scheduler Stats Receive Broadcast Data Count
     rfStatXmtCntlCnt 1.3.6.1.4.1.161.19.3.3.1.63 counter32 read-only
RF Scheduler Stats Transmit Control Count
     rfStatRcvCntlCnt 1.3.6.1.4.1.161.19.3.3.1.64 counter32 read-only
RF Scheduler Stats Receive Control Count
     rfStatInSyncCount 1.3.6.1.4.1.161.19.3.3.1.65 counter32 read-only
RF Scheduler Stats In Sync Count
     rfStatOutSyncCount 1.3.6.1.4.1.161.19.3.3.1.66 counter32 read-only
RF Scheduler Stats Out Sync Count
     rfStatOverrunCount 1.3.6.1.4.1.161.19.3.3.1.67 counter32 read-only
RF Scheduler Stats Overrun Count
     rfStatUnderrunCount 1.3.6.1.4.1.161.19.3.3.1.68 counter32 read-only
RF Scheduler Stats Underrun Count
     rfStatRcvCorruptDataCount 1.3.6.1.4.1.161.19.3.3.1.69 counter32 read-only
RF Scheduler Stats Receive Corrupt Data Count
     rfStatBadBcastCtlCnt 1.3.6.1.4.1.161.19.3.3.1.70 counter32 read-only
RF Scheduler Stats Bad Broadcast Control Count
     rfStatPLLOutOfLockCnt 1.3.6.1.4.1.161.19.3.3.1.71 counter32 read-only
RF Scheduler Stats PLL Out of Lock Count
     rfStatBeaconVerMismatchCnt 1.3.6.1.4.1.161.19.3.3.1.72 counter32 read-only
RF Scheduler Stats Beacon version Mismatch Count
     rfStatBadFreqBcnRcvCnt 1.3.6.1.4.1.161.19.3.3.1.73 counter32 read-only
RF Scheduler Stats Wrong Frequency Beacon Received Count
     rfStatnonLiteBcnRcvCnt 1.3.6.1.4.1.161.19.3.3.1.74 counter32 read-only
RF Scheduler Stats Non Lite Beacon Received Count
     rfStatUnsupFeatBcnRcvCnt 1.3.6.1.4.1.161.19.3.3.1.75 counter32 read-only
RF Scheduler Stats Unsupported Feature Beacon Received Count
     rfStatUnkwnFeatBcnRcvCnt 1.3.6.1.4.1.161.19.3.3.1.76 counter32 read-only
RF Scheduler Stats Unknown Feature Beacon Received Count
     rfStatTxCalFailCnt 1.3.6.1.4.1.161.19.3.3.1.77 counter32 read-only
RF Scheduler Stats TX Calibration Failures Count
     rfStatBadInSyncIDRcv 1.3.6.1.4.1.161.19.3.3.1.78 counter32 read-only
RF Scheduler Stats Bad In Sync ID Received Count
     rfStatTempOutOfRange 1.3.6.1.4.1.161.19.3.3.1.79 counter32 read-only
RF Scheduler Stats Temperature Out of Range Count
     rfStatRSSIOutOfRange 1.3.6.1.4.1.161.19.3.3.1.80 counter32 read-only
RF Scheduler Stats RSSI Out of Range Count
     rfStatRangeCapEnf 1.3.6.1.4.1.161.19.3.3.1.81 counter32 read-only
RF Scheduler Stats Range Cap Enforced Count
     rfStatRcvLTStart 1.3.6.1.4.1.161.19.3.3.1.82 counter32 read-only
RF Scheduler Stats Rcv LT Start Count
     rfStatRcvLTStartHS 1.3.6.1.4.1.161.19.3.3.1.83 counter32 read-only
RF Scheduler Stats Rcv LT Start HS Count
     rfStatRcvLTResult 1.3.6.1.4.1.161.19.3.3.1.84 counter32 read-only
RF Scheduler Stats Rcv LT Result Count
     rfStatXmtLTResult 1.3.6.1.4.1.161.19.3.3.1.85 counter32 read-only
RF Scheduler Stats Xmt LT Result Count
     whispFeatureKeyOrigin 1.3.6.1.4.1.161.19.3.3.1.86 displaystring read-only
Origin of Feature Key which includes GMT time and location of the Key programming (if time is 0 the key was converted locally)
     radioMSN 1.3.6.1.4.1.161.19.3.3.1.87 displaystring read-only
MSN of the radio.
     updateStatus 1.3.6.1.4.1.161.19.3.3.1.88 integer read-only
Current Status of Device Update
     syslogStatTxSuccesses 1.3.6.1.4.1.161.19.3.3.1.89 integer read-only
The count of Syslog messages sent to UDP layer.
     syslogStatDropped 1.3.6.1.4.1.161.19.3.3.1.90 integer read-only
Number of dropped syslog messages due to device overload and/or resource limitations.
     fecStatLinkLost 1.3.6.1.4.1.161.19.3.3.1.91 counter32 read-only
Ethernet link lost count
     fecStatLinkDetected 1.3.6.1.4.1.161.19.3.3.1.92 counter32 read-only
Ethernet link detected count
     natDhcpStatus 1.3.6.1.4.1.161.19.3.3.1.93 displaystring read-only
Display NAT Public interface current DHPC status.
     fecInDiscardsCount 1.3.6.1.4.1.161.19.3.3.1.94 unsigned32 read-only
Ethernet in discards count.
     fecInErrorsCount 1.3.6.1.4.1.161.19.3.3.1.95 unsigned32 read-only
Ethernet in errors count.
     fecOutDiscardsCount 1.3.6.1.4.1.161.19.3.3.1.96 unsigned32 read-only
Ethernet out discards count.
     fecOutErrorsCount 1.3.6.1.4.1.161.19.3.3.1.97 unsigned32 read-only
Ethernet out errors count.
     rfInDiscardsCount 1.3.6.1.4.1.161.19.3.3.1.98 unsigned32 read-only
RF in discards count.
     rfInErrorsCount 1.3.6.1.4.1.161.19.3.3.1.99 unsigned32 read-only
RF in errors count.
     rfOutDiscardsCount 1.3.6.1.4.1.161.19.3.3.1.100 unsigned32 read-only
RF out discards count.
     rfOutErrorsCount 1.3.6.1.4.1.161.19.3.3.1.101 unsigned32 read-only
RF out errors count.
     fecInDiscardsOverloadCount 1.3.6.1.4.1.161.19.3.3.1.102 counter32 read-only
Ethernet in discards overload.
     fecOutDiscardsOverloadCount 1.3.6.1.4.1.161.19.3.3.1.103 counter32 read-only
Ethernet out discards overload.
     rfInDiscardsOverloadCount 1.3.6.1.4.1.161.19.3.3.1.104 counter32 read-only
Rf in discards overload.
     rfOutDiscardsOverloadCount 1.3.6.1.4.1.161.19.3.3.1.105 counter32 read-only
Rf out discards overload.
     fpgaCompileInfo 1.3.6.1.4.1.161.19.3.3.1.106 displaystring read-only
Display the fpga compiled attributes. (Engineering Only)
     fpgaBuildDate 1.3.6.1.4.1.161.19.3.3.1.107 displaystring read-only
Display the entire fpga build date string. (Engineering Only)
     aggregateBandwidthCap 1.3.6.1.4.1.161.19.3.3.1.108 integer read-only
The maximum aggregate (uplink + downlink) the radio is capable of.
     calibrationStatusBool 1.3.6.1.4.1.161.19.3.3.1.109 integer read-only
Boolean OID to show if device is calibrated. Applicable to FSK and MIMO radios only. Enumeration: 'calibrated': 1, 'notCalibrated': 0.
     calibrationStatusBox 1.3.6.1.4.1.161.19.3.3.1.110 displaystring read-only
String to show if radio is calibrated. Applicable to FSK and MIMO radios only.
     radioEngKeyed 1.3.6.1.4.1.161.19.3.3.1.111 integer read-only
This will be set either as 0 if the engineering key patch is not applied to the radio or 1 if it is applied.
     bridgeCbFecStatfloods 1.3.6.1.4.1.161.19.3.3.1.112 counter32 read-only
Bridge CB RF Stats Floods (Multipoint AP only)
     bridgeCbRFStatfloods 1.3.6.1.4.1.161.19.3.3.1.113 counter32 read-only
Bridge CB RF Stats Floods (Multipoint AP only)
     agcGainRxCH1 1.3.6.1.4.1.161.19.3.3.1.114 integer read-only
Rcv Gain on Catalina Rx CH1 of SM.
     agcGainRxCH2 1.3.6.1.4.1.161.19.3.3.1.115 integer read-only
Rcv Gain on Catalina Rx CH2 of SM.
     antType 1.3.6.1.4.1.161.19.3.3.1.116 integer read-only
Indicates whether the antenna is integrated or external (connectorized). Enumeration: 'integrated': 0, 'external': 1.
     rfStatRcvCorruptControlCount 1.3.6.1.4.1.161.19.3.3.1.117 counter32 read-only
RF Scheduler Stats Receive Corrupt Control Data Count
     rfStatXmtMDataCnt 1.3.6.1.4.1.161.19.3.3.1.217 counter32 read-only
RF Scheduler Stats Transmit Multicast Data Count
     rfStatRcvMDataCnt 1.3.6.1.4.1.161.19.3.3.1.218 counter32 read-only
RF Scheduler Stats Receive Multicast Data Count
 whispBoxConfig 1.3.6.1.4.1.161.19.3.3.2
     linkNegoSpeed 1.3.6.1.4.1.161.19.3.3.2.1 displaystring read-write
Link negotiation speeds. H10BT -- 10 Base T Half Duplex, F10BT -- 10 Base T Full Duplex, H100BT -- 100 Base T Half Duplex, F100BT -- 100 Base T Full Duplex. Separate the values with comma when doing a set. e.g. H10BT,F10BT,H100BT,F100BT
     colorCode 1.3.6.1.4.1.161.19.3.3.2.2 integer read-write
Color code.
     displayOnlyAccess 1.3.6.1.4.1.161.19.3.3.2.3 displaystring read-write
This variable is deprecated.
     fullAccess 1.3.6.1.4.1.161.19.3.3.2.4 displaystring read-write
Full access password.
     webAutoUpdate 1.3.6.1.4.1.161.19.3.3.2.5 integer read-write
Web page auto update in seconds. 0 means disabled.
     pass1Status 1.3.6.1.4.1.161.19.3.3.2.6 displaystring read-only
Password 1(display only) status.
     pass2Status 1.3.6.1.4.1.161.19.3.3.2.7 displaystring read-only
Password 2(full access) status.
     bridgeEntryTimeout 1.3.6.1.4.1.161.19.3.3.2.8 integer read-write
Bridge table time out Range : 25 -- 1440 Minutes.
     snmpMibPerm 1.3.6.1.4.1.161.19.3.3.2.9 integer read-write
Read/Write permission for MIB groups. Enumeration: 'readWrite': 0, 'readOnly': 1.
     bhTimingMode 1.3.6.1.4.1.161.19.3.3.2.10 integer read-write
Variable to switch between Timing Master and Timing Slave. For Backhaul units only. Enumeration: 'timingMaster': 1, 'timeingSlave': 0.
     bhModulation 1.3.6.1.4.1.161.19.3.3.2.11 integer read-write
Modulation scheme. For Backhaul units only. Only level 4 backhaul can be changed to 20Mbits/Second. Enumeration: 'twentyMbitsPerSecond': 1, 'tenMbitsPerSecond': 0.
     powerControl 1.3.6.1.4.1.161.19.3.3.2.12 integer read-write
Power control. Enumeration: 'low': 0, 'normal': 1.
     extFilterDelay 1.3.6.1.4.1.161.19.3.3.2.13 integer read-write
External Filters Delay. For 900MHz radios only.
     antennaGain 1.3.6.1.4.1.161.19.3.3.2.14 integer read-write
External Antenna Gain. For radios that uses an external antenna or the DFS feature.
     eirp 1.3.6.1.4.1.161.19.3.3.2.15 integer read-write
This variable is deprecated.
     dynamicLearning 1.3.6.1.4.1.161.19.3.3.2.16 integer read-write
To enable VLAN dynamic learning. Enumeration: 'disabled': 0, 'enabled': 1.
     managementVID 1.3.6.1.4.1.161.19.3.3.2.17 integer read-write
Management VLAN VID.
     agingTimeout 1.3.6.1.4.1.161.19.3.3.2.18 integer read-write
Aging timeout.
     frameType 1.3.6.1.4.1.161.19.3.3.2.19 integer read-write
Allow only tagged frame. Enumeration: 'taggedonly': 1, 'allframes': 0, 'untaggedonly': 2.
     addVlanMember 1.3.6.1.4.1.161.19.3.3.2.20 integer read-write
Add VLAN memeber.
     removeVlanMember 1.3.6.1.4.1.161.19.3.3.2.21 integer read-write
Remove VLAN memeber.
     scheduling 1.3.6.1.4.1.161.19.3.3.2.22 integer read-write
To use hardware or software scheduling Enumeration: 'hardware': 1.
     transmitterOP 1.3.6.1.4.1.161.19.3.3.2.23 integer read-write
Transmitter output power. This is not available on OFDM SMs.
     bridgeEnable 1.3.6.1.4.1.161.19.3.3.2.24 integer read-write
Disable or enable bridging functionality for a BH unit. Enumeration: 'enable': 0, 'disable': 1.
     fecEnable 1.3.6.1.4.1.161.19.3.3.2.25 integer read-write
Disable or enable FEC error correction functionality for multipoint units. Enumeration: 'enable': 1, 'disable': 0.
     trapIP1 1.3.6.1.4.1.161.19.3.3.2.26 ipaddress read-write
Obsoleted. Configure with whispBoxDNS.trap1.
     trapIP2 1.3.6.1.4.1.161.19.3.3.2.27 ipaddress read-write
Obsoleted. Configure with whispBoxDNS.trap2.
     trapIP3 1.3.6.1.4.1.161.19.3.3.2.28 ipaddress read-write
Obsoleted. Configure with whispBoxDNS.trap3.
     trapIP4 1.3.6.1.4.1.161.19.3.3.2.29 ipaddress read-write
Obsoleted. Configure with whispBoxDNS.trap4.
     trapIP5 1.3.6.1.4.1.161.19.3.3.2.30 ipaddress read-write
Obsoleted. Configure with whispBoxDNS.trap5.
     trapIP6 1.3.6.1.4.1.161.19.3.3.2.31 ipaddress read-write
Obsoleted. Configure with whispBoxDNS.trap6.
     trapIP7 1.3.6.1.4.1.161.19.3.3.2.32 ipaddress read-write
Obsoleted. Configure with whispBoxDNS.trap7.
     trapIP8 1.3.6.1.4.1.161.19.3.3.2.33 ipaddress read-write
Obsoleted. Configure with whispBoxDNS.trap8.
     trapIP9 1.3.6.1.4.1.161.19.3.3.2.34 ipaddress read-write
Obsoleted. Configure with whispBoxDNS.trap9.
     trapIP10 1.3.6.1.4.1.161.19.3.3.2.35 ipaddress read-write
Obsoleted. Configure with whispBoxDNS.trap10.
     commStringRWrite 1.3.6.1.4.1.161.19.3.3.2.36 displaystring read-write
Read/Write Community string. This is a write-only OID.
     subnetMask 1.3.6.1.4.1.161.19.3.3.2.37 integer read-write
Subnet mask for the management IP 1.
     mngtIP 1.3.6.1.4.1.161.19.3.3.2.38 ipaddress read-write
Management IP address 1.
     allowVIDAccess 1.3.6.1.4.1.161.19.3.3.2.39 integer read-write
Allow or disallow local SM management VID access. Enumeration: 'enable': 0, 'disable': 1.
     setDefaultPlug 1.3.6.1.4.1.161.19.3.3.2.40 integer read-write
If enable parameters are set to Factory Defaults upon default plug detection. Enumeration: 'enable': 1, 'disable': 0.
     hwsCompatibility 1.3.6.1.4.1.161.19.3.3.2.41 integer read-write
If enable, it ensures 6.0 compatibility with HWS. Enumeration: 'enable': 0, 'disable': 1.
     gpsInput 1.3.6.1.4.1.161.19.3.3.2.42 integer read-write
Values 1, 2, 3 have been deprecated. (0) Generate AP sync signal. (1) Deprecated. Sync AP to received signal (Timing Port/UGPS). It will set AutoSync. (2) Deprecated. Sync AP to received signal (Power Port). It will set AutoSync plus Free Run. (3) Deprecated. Sync AP using iGPS (Only on devices which support it). It will set AutoSync plus Free Run. (4) AutoSync. (5) AutoSync plus Free Run. Enumeration: 'autoSync': 4, 'autoSyncFreeRun': 5, 'syncToReceivedSignalTimingPort': 1, 'syncToiGPS': 3, 'generateSyncSignal': 0, 'syncToReceivedSignalPowerPort': 2.
     ism 1.3.6.1.4.1.161.19.3.3.2.43 integer read-write
Enable ISM on 5.7GHz frequency band radios. Enumeration: 'enable': 1, 'disable': 0.
     hiPriority 1.3.6.1.4.1.161.19.3.3.2.44 integer read-write
Enable Hi Priority Data Queue on BH radios. Enumeration: 'enable': 1, 'disable': 0.
     userName 1.3.6.1.4.1.161.19.3.3.2.45 displaystring read-write
User name.
     userPassword 1.3.6.1.4.1.161.19.3.3.2.46 displaystring read-write
User password.
     userAccessLevel 1.3.6.1.4.1.161.19.3.3.2.47 integer read-write
User access level.
     deleteUser 1.3.6.1.4.1.161.19.3.3.2.48 displaystring read-write
User name to remove.
     twoXRate 1.3.6.1.4.1.161.19.3.3.2.49 integer read-write
To enable or disable double rate. Enumeration: 'disabled': 0, 'enabled': 1.
     lanDhcpState 1.3.6.1.4.1.161.19.3.3.2.50 integer read-write
To enable or disable LAN Interface DHCP feature. Enumeration: 'disabled': 0, 'enabled': 1.
     sessionTimeout 1.3.6.1.4.1.161.19.3.3.2.51 integer read-write
Timer for Telnet, Web and FTP sessions.
     vlanMemberSource 1.3.6.1.4.1.161.19.3.3.2.52 integer read-write
Specified the VLAN member source to display. 0=configured, 1=active configuration. Note that this OID is internal to SNMP and is not available at the Web Interface. Enumeration: 'active': 1, 'configured': 0.
     addCustomFreqList 1.3.6.1.4.1.161.19.3.3.2.53 displaystring read-write
Add Custom Frequencies. Frequencies can be added in a list separated by commas. Example: 355000, 345000 Frequencies must be in increments of .05 MHz. Examples: 340025, 340050 A get will return the current custom frequency list. Max string length entered cannot exceed 128 character. Note if there is not enough room for all the frequencies none will be added. For use on 3.5/3.6 GHz MIMO OFDM Radios only.
     removeCustomFreqList 1.3.6.1.4.1.161.19.3.3.2.54 displaystring read-write
Remove Custom Frequencies. Frequencies can be removed in a list separated by commas. Example: 355000, 345000 A get will return the current custom frequencies. For use on 3.5 GHz OFDM Radios only.
     allowColocation 1.3.6.1.4.1.161.19.3.3.2.55 integer read-write
Allow or disallow Colocation for software scheduling Backhaul Timing Masters with hardware scheduling Backhaul Timing Masters. Enumeration: 'enable': 1, 'disable': 0.
     changeUsrPwd 1.3.6.1.4.1.161.19.3.3.2.56 displaystring read-write
Allow to change the password of a given user of a given user. Usage: userName,password.
     mngtIP2 1.3.6.1.4.1.161.19.3.3.2.57 ipaddress read-write
Management IP address 2.
     subnetMask2 1.3.6.1.4.1.161.19.3.3.2.58 integer read-write
Subnet mask for the management IP 2.
     mngtIP3 1.3.6.1.4.1.161.19.3.3.2.59 ipaddress read-write
Management IP address 3.
     subnetMask3 1.3.6.1.4.1.161.19.3.3.2.60 integer read-write
Subnet mask for the management IP 3.
     mngtIP4 1.3.6.1.4.1.161.19.3.3.2.61 ipaddress read-write
Management IP address 4.
     subnetMask4 1.3.6.1.4.1.161.19.3.3.2.62 integer read-write
Subnet mask for the management IP 4.
     mngtIP5 1.3.6.1.4.1.161.19.3.3.2.63 ipaddress read-write
Management IP address 5.
     subnetMask5 1.3.6.1.4.1.161.19.3.3.2.64 integer read-write
Subnet mask for the management IP 5.
     mngtIP6 1.3.6.1.4.1.161.19.3.3.2.65 ipaddress read-write
Management IP address 6.
     subnetMask6 1.3.6.1.4.1.161.19.3.3.2.66 integer read-write
Subnet mask for the management IP 6.
     mngtIP7 1.3.6.1.4.1.161.19.3.3.2.67 ipaddress read-write
Management IP address 7.
     subnetMask7 1.3.6.1.4.1.161.19.3.3.2.68 integer read-write
Subnet mask for the management IP 7.
     mngtIP8 1.3.6.1.4.1.161.19.3.3.2.69 ipaddress read-write
Management IP address 8.
     subnetMask8 1.3.6.1.4.1.161.19.3.3.2.70 integer read-write
Subnet mask for the management IP 8.
     mngtIP9 1.3.6.1.4.1.161.19.3.3.2.71 ipaddress read-write
Management IP address 9.
     subnetMask9 1.3.6.1.4.1.161.19.3.3.2.72 integer read-write
Subnet mask for the management IP 9.
     mngtIP10 1.3.6.1.4.1.161.19.3.3.2.73 ipaddress read-write
Management IP address 10.
     subnetMask10 1.3.6.1.4.1.161.19.3.3.2.74 integer read-write
Subnet mask for the management IP 10.
     bhvlanEnable 1.3.6.1.4.1.161.19.3.3.2.75 integer read-write
To enable or disable VLAN for Backhaul Master/Slave. Enumeration: 'enable': 1, 'disable': 0.
     lldpBroadcastEnable 1.3.6.1.4.1.161.19.3.3.2.76 integer read-write
To enable Broadcast of LLDP message, if disabled LLDP uses multicast Enumeration: 'enable': 1, 'disable': 0.
     regionCode 1.3.6.1.4.1.161.19.3.3.2.77 integer read-write
Set Region Code for the Unit. Used the individual region[Region] OIDs instead. Enumeration: 'brazil': 5, 'canada': 3, 'none': 0, 'australia': 6, 'europe': 4, 'indonesia': 10, 'india': 8, 'us': 2, 'other': 1, 'ireland': 11, 'russia': 7, 'spain': 9.
     russiaRegion 1.3.6.1.4.1.161.19.3.3.2.78 integer read-write
Set Category Region for Russian 5.9/6.05 GHz Radio Only. Use setting under regionAsia now. Enumeration: 'category1': 1, 'category3': 3, 'category2': 2, 'category4': 4.
     commStringROnly 1.3.6.1.4.1.161.19.3.3.2.79 displaystring read-write
Set Read Only commnunity string.
     ethernetLinkSpeed 1.3.6.1.4.1.161.19.3.3.2.80 integer read-write
Set/Get Ethernet link speed and duplex settings. Note that the Gigabit options are only valid for boards that support Gigabit speeds. Enumeration: 'forced100F': 8, 'auto10F-10H': 3, 'auto100H-10F-10H': 7, 'auto1000F-100F-100H-10F-10H': 63, 'auto100H-10H': 5, 'forced100H': 4, 'auto100F-100H-10F-10H': 15, 'auto100F-100H': 12, 'forced10H': 1, 'forced10F': 2, 'auto100F-100H-10H': 13.
     cyclicPrefix 1.3.6.1.4.1.161.19.3.3.2.81 integer read-write
Cyclic Prefix value, for OFDM Radios only. Deprecated for MIMO SMs. For PMP430 SMs, this value is only used while in PMP430 mode (1/16 is forced in PMP450 mode). Enumeration: 'one-quarter-one-eighth': 3, 'one-eighth-one-sixteenth': 5, 'one-quarter-one-sixteenth': 4, 'one-sixteenth': 2, 'one-quarter': 0, 'one-quarter-one-eighth-one-sixteenth': 6, 'one-eighth': 1.
     numberCustomFreq 1.3.6.1.4.1.161.19.3.3.2.82 integer read-only
Number of custom frequencies added. There is a maximum of 100. For use on 3.5 GHz OFDM Radios only.
     channelBandwidth 1.3.6.1.4.1.161.19.3.3.2.83 displaystring read-only
The current channel bandwidth in MHz. For use on OFDM Radios only. Obsoleted for MIMO SMs.
     setDefaults 1.3.6.1.4.1.161.19.3.3.2.84 integer read-write
Setting this to 1 will set the radio to Factory Defaults after the next reboot. Setting this to 0 will undo Factory Defaults if and only if Factory Defaults have been set previously without rebooting. Reading this OID will return 0 if Factory Defaults are not set, or a 2 if Factory Defaults are set and we are now awaiting a reboot. NOTE: this operation is reversible as long as you write a 0 to this OID prior to reboot. As a security measure, this OID is only valid when the radio was booted with the default plug inserted. If the default plug was not inserted on boot, then attempting to set this OID will fail. Enumeration: 'factoryDefaultsSet-AwaitingReboot': 2, 'noChangeOrUndoFactoryDefaults': 0, 'setToFactoryDefaults': 1.
     radioRateAdapt 1.3.6.1.4.1.161.19.3.3.2.85 integer read-write
Rate adaptation parameter. 0: no rate adaptation. 1: 1x and 2x adaptation. 2: 1x, 2x and 3x adaptation (OFDM only). 3: 1x, 2x, 3x and 4x adaption (OFDM only). 4: 1x (MIMO duplicate on both paths). 5: 1x/2x (MIMO). 7: 1x/2x/4x (MIMO). 8: 1x/2x/4x/6x (MIMO). 9: 1x/2x/4x/6x/8x (MIMO). For PMP430 radios this applies to Downlink Rate Adapt only. Use radioRateAdaptUL for setting uplink rate adapt on PMP430 radios. Enumeration: 'onexmimo': 4, 'onextwoxthreexfourx': 3, 'onextwox': 1, 'onextwoxfourxsixx': 8, 'onextwoxmimo': 5, 'onextwoxfourxsixxeightx': 9, 'onextwoxthreex': 2, 'onextwoxfourx': 7, 'onex': 0.
     siteInfoViewable 1.3.6.1.4.1.161.19.3.3.2.86 integer read-write
Enable non login users the ability to view Site Information Enumeration: 'enable': 1, 'disable': 0.
     largeVCQ 1.3.6.1.4.1.161.19.3.3.2.87 integer read-write
Enable or disable Large VC Qs for SM or PTP radios. Enable when Uplink is being used for camera video feed. Enumeration: 'enable': 1, 'disable': 0.
     latitude 1.3.6.1.4.1.161.19.3.3.2.88 displaystring read-write
The latitude setting of this unit in decimal degrees.
     longitude 1.3.6.1.4.1.161.19.3.3.2.89 displaystring read-write
The longitude setting of this unit in decimal degrees.
     height 1.3.6.1.4.1.161.19.3.3.2.90 integer read-write
The height setting of this unit in meters.
     bandwidth 1.3.6.1.4.1.161.19.3.3.2.91 integer read-write
Radio bandwidth setting. Deprecated for MIMO SMs. Instead use bandwidthScan. Enumeration: 'bandwidth10-20mhz': 10, 'bandwidth5-20mhz': 9, 'bandwidth10mhz': 3, 'bandwidth5-10mhz': 8, 'bandwidth5mhz': 1, 'bandwidth20mhz': 5, 'bandwidth5-10-20mhz': 11.
     dataScramblingMethod 1.3.6.1.4.1.161.19.3.3.2.92 integer read-only
This OID is for OFDM only and is obsolete. Enumeration: 'r10DataScrambling': 1, 'legacyDataScrambling': 0.
     portVID 1.3.6.1.4.1.161.19.3.3.2.93 integer read-write
Backhaul Port VID (PVID).
     radioRateAdaptUL 1.3.6.1.4.1.161.19.3.3.2.94 integer read-write
Uplink Rate adaptation parameter (OFDM PMP430 only). 0: no rate adaptation. 1: 1x and 2x adaptation. 2: 1x, 2x and 3x adaptation. 3: 1x, 2x, 3x and 4x adaption. For PMP430 radios this applies to Uplink Rate Adapt only. Use radioRateAdapt for setting downlink rate adapt. 4x rate adapt not permitted on AES, 20MHz, 1/16 CP radios. Enumeration: 'onexmimo': 4, 'onextwoxthreexfourx': 3, 'onextwox': 1, 'onextwoxfourxsixx': 8, 'onextwoxmimo': 5, 'onextwoxfourxsixxeightx': 9, 'onextwoxthreex': 2, 'onextwoxfourx': 7, 'onex': 0.
     providerVID 1.3.6.1.4.1.161.19.3.3.2.95 integer read-write
Provider VID for QinQ VLAN.
     mac1VIDMapAddr 1.3.6.1.4.1.161.19.3.3.2.96 macaddress read-write
MAC Address for Entry 1 in MAC Address VID Mapping Table.
     mac1VIDMapVid 1.3.6.1.4.1.161.19.3.3.2.97 integer read-write
VID for Entry 1 in MAC Address VID Mapping Table.
     mac2VIDMapAddr 1.3.6.1.4.1.161.19.3.3.2.98 macaddress read-write
MAC Address for Entry 2 in MAC Address VID Mapping Table.
     mac2VIDMapVid 1.3.6.1.4.1.161.19.3.3.2.99 integer read-write
VID for Entry 2 in MAC Address VID Mapping Table.
     mac3VIDMapAddr 1.3.6.1.4.1.161.19.3.3.2.100 macaddress read-write
MAC Address for Entry 3 in MAC Address VID Mapping Table.
     mac3VIDMapVid 1.3.6.1.4.1.161.19.3.3.2.101 integer read-write
VID for Entry 3 in MAC Address VID Mapping Table.
     mac4VIDMapAddr 1.3.6.1.4.1.161.19.3.3.2.102 macaddress read-write
MAC Address for Entry 4 in MAC Address VID Mapping Table.
     mac4VIDMapVid 1.3.6.1.4.1.161.19.3.3.2.103 integer read-write
VID for Entry 4 in MAC Address VID Mapping Table.
     mac5VIDMapAddr 1.3.6.1.4.1.161.19.3.3.2.104 macaddress read-write
MAC Address for Entry 5 in MAC Address VID Mapping Table.
     mac5VIDMapVid 1.3.6.1.4.1.161.19.3.3.2.105 integer read-write
VID for Entry 5 in MAC Address VID Mapping Table.
     mac6VIDMapAddr 1.3.6.1.4.1.161.19.3.3.2.106 macaddress read-write
MAC Address for Entry 6 in MAC Address VID Mapping Table.
     mac6VIDMapVid 1.3.6.1.4.1.161.19.3.3.2.107 integer read-write
VID for Entry 6 in MAC Address VID Mapping Table.
     mac7VIDMapAddr 1.3.6.1.4.1.161.19.3.3.2.108 macaddress read-write
MAC Address for Entry 7 in MAC Address VID Mapping Table.
     mac7VIDMapVid 1.3.6.1.4.1.161.19.3.3.2.109 integer read-write
VID for Entry 7 in MAC Address VID Mapping Table.
     mac8VIDMapAddr 1.3.6.1.4.1.161.19.3.3.2.110 macaddress read-write
MAC Address for Entry 8 in MAC Address VID Mapping Table.
     mac8VIDMapVid 1.3.6.1.4.1.161.19.3.3.2.111 integer read-write
VID for Entry 8 in MAC Address VID Mapping Table.
     mac9VIDMapAddr 1.3.6.1.4.1.161.19.3.3.2.112 macaddress read-write
MAC Address for Entry 9 in MAC Address VID Mapping Table.
     mac9VIDMapVid 1.3.6.1.4.1.161.19.3.3.2.113 integer read-write
VID for Entry 9 in MAC Address VID Mapping Table.
     mac10VIDMapAddr 1.3.6.1.4.1.161.19.3.3.2.114 macaddress read-write
MAC Address for Entry 10 in MAC Address VID Mapping Table.
     mac10VIDMapVid 1.3.6.1.4.1.161.19.3.3.2.115 integer read-write
VID for Entry 10 in MAC Address VID Mapping Table.
     vlanPortType 1.3.6.1.4.1.161.19.3.3.2.116 integer read-write
VLAN Port Type for VLAN interface. Default is Q. Enumeration: 'q': 0, 'qinq': 1.
     vlanAcceptQinQFrames 1.3.6.1.4.1.161.19.3.3.2.117 integer read-write
Allow/Disallow packets already doubly-tagged (QinQ) to ingress the FEC of BHM, BHS, or MP SM. Not configurable on MP AP. Enumeration: 'enable': 1, 'disable': 0.
     whispWebUserAccessMode 1.3.6.1.4.1.161.19.3.3.2.118 integer read-write
This variable selects if web page users for the radio should be authenticated locally or via a centralised remote Radius server Enumeration: 'remote': 1, 'remotethenlocal': 2, 'local': 0.
     usrAccountEnableAccounting 1.3.6.1.4.1.161.19.3.3.2.119 integer read-write
Select the level of accounting information to be reported to the server Enumeration: 'deviceAccess': 1, 'all': 3, 'disable': 0, 'dataUsage': 2.
     allowRejectThenLocal 1.3.6.1.4.1.161.19.3.3.2.120 integer read-write
Control for allowing local authenication if the AAA remote server Enumeration: 'allowLocalAuthIfAAAReject': 1, 'doNotAllowLocalAuthifAAAReject': 0.
     snrCalculation 1.3.6.1.4.1.161.19.3.3.2.121 integer read-write
This OID is deprecated. Receive quality calulation is always on since it no longer affects packet per second performance. Enumeration: 'enable': 1, 'disable': 0.
     priorityPrecedence 1.3.6.1.4.1.161.19.3.3.2.122 integer read-write
Allows user to decide if 802.1p or DiffServ priority bits should be used first when making priority decisions. Enumeration: 'diffservThenEight021p': 1, 'eight021pThenDiffServ': 0.
     installationColorCode 1.3.6.1.4.1.161.19.3.3.2.123 integer read-write
Installation Color Code. Allows non-configured SMs to register to an AP with UCC enabled in order to facilitate remote provisioning. Enumeration: 'disabled': 0, 'enabled': 1.
     apSmMode 1.3.6.1.4.1.161.19.3.3.2.124 integer read-write
Set AP to SM or SM to AP. Useful for facillitating scripting of running Spectrum Analyzer on an AP. Radio must have AP Feature Key. 1 - Set to SM, 0 - Set to AP. Enumeration: 'ap': 0, 'sm': 1.
     pppoeFilter 1.3.6.1.4.1.161.19.3.3.2.125 integer read-write
To set PPPoE packet filter. Enumeration: 'filterOn': 1, 'filterOff': 0.
     smbFilter 1.3.6.1.4.1.161.19.3.3.2.126 integer read-write
To set SMB packet filter. Enumeration: 'filterOn': 1, 'filterOff': 0.
     snmpFilter 1.3.6.1.4.1.161.19.3.3.2.127 integer read-write
To set SNMP packet filter. Enumeration: 'filterOn': 1, 'filterOff': 0.
     userP1Filter 1.3.6.1.4.1.161.19.3.3.2.128 integer read-write
To set user defined port 1 packet filter. Enumeration: 'filterOn': 1, 'filterOff': 0.
     userP2Filter 1.3.6.1.4.1.161.19.3.3.2.129 integer read-write
To set user defined port 2 packet filter. Enumeration: 'filterOn': 1, 'filterOff': 0.
     userP3Filter 1.3.6.1.4.1.161.19.3.3.2.130 integer read-write
To set user defined port 3 packet filter. Enumeration: 'filterOn': 1, 'filterOff': 0.
     allOtherIpFilter 1.3.6.1.4.1.161.19.3.3.2.131 integer read-write
To set all other IPv4 packet filter. Enumeration: 'filterOn': 1, 'filterOff': 0.
     allIpv4Filter 1.3.6.1.4.1.161.19.3.3.2.132 integer read-write
To set all IPv4 packet filter. Enabling this will automatically enable all of the known IP filters (SMB, SNMP, Bootp, IPv4 Mcast, User Defined Ports, and All Other IPv4). Enumeration: 'filterOn': 1, 'filterOff': 0.
     arpFilter 1.3.6.1.4.1.161.19.3.3.2.133 integer read-write
To set ARP packet filter. Enumeration: 'filterOn': 1, 'filterOff': 0.
     allOthersFilter 1.3.6.1.4.1.161.19.3.3.2.134 integer read-write
To set all other packet filter when. Enumeration: 'filterOn': 1, 'filterOff': 0.
     userDefinedPort1 1.3.6.1.4.1.161.19.3.3.2.135 integer read-write
An integer value of number one user defined port. Range:0-65535
     port1TCPFilter 1.3.6.1.4.1.161.19.3.3.2.136 integer read-write
To set user defined port 1 TCP traffic filter. Enumeration: 'filterOn': 1, 'filterOff': 0.
     port1UDPFilter 1.3.6.1.4.1.161.19.3.3.2.137 integer read-write
To set user defined port 1 UDP traffic filter. Enumeration: 'filterOn': 1, 'filterOff': 0.
     userDefinedPort2 1.3.6.1.4.1.161.19.3.3.2.138 integer read-write
An integer value of number two user defined port. Range:0-65535
     port2TCPFilter 1.3.6.1.4.1.161.19.3.3.2.139 integer read-write
To set user defined port 2 TCP traffic filter. Enumeration: 'filterOn': 1, 'filterOff': 0.
     port2UDPFilter 1.3.6.1.4.1.161.19.3.3.2.140 integer read-write
To set user defined port 2 UDP traffic filter. Enumeration: 'filterOn': 1, 'filterOff': 0.
     userDefinedPort3 1.3.6.1.4.1.161.19.3.3.2.141 integer read-write
An integer value of number three user defined port. Range:0-65535
     port3TCPFilter 1.3.6.1.4.1.161.19.3.3.2.142 integer read-write
To set user defined port 3 TCP traffic filter. Enumeration: 'filterOn': 1, 'filterOff': 0.
     port3UDPFilter 1.3.6.1.4.1.161.19.3.3.2.143 integer read-write
To set user defined port 3 UDP traffic filter. Enumeration: 'filterOn': 1, 'filterOff': 0.
     bootpcFilter 1.3.6.1.4.1.161.19.3.3.2.144 integer read-write
To set bootp client sourced packets filter. Enumeration: 'filterOn': 1, 'filterOff': 0.
     bootpsFilter 1.3.6.1.4.1.161.19.3.3.2.145 integer read-write
To set bootp server sourced packets filter. Enumeration: 'filterOn': 1, 'filterOff': 0.
     ip4MultFilter 1.3.6.1.4.1.161.19.3.3.2.146 integer read-write
To set IPv4 MultiCast packets filter when NAT is disabled. Enumeration: 'filterOn': 1, 'filterOff': 0.
     packetFilterDirection 1.3.6.1.4.1.161.19.3.3.2.147 integer read-write
To set packet filter direction. Upstream is default. Enumeration: 'downstream': 2, 'upstream': 1.
     encryptionConfig 1.3.6.1.4.1.161.19.3.3.2.148 integer read-write
For supported radio, set the encryption algorithm to use. DES by default. Cannot be set if encryption is disabled. Enumeration: 'aes': 1, 'des': 0.
     pppoeCtlPriority 1.3.6.1.4.1.161.19.3.3.2.149 integer read-write
Prioritization of PPPoE Control packets. Enumeration: 'high': 1, 'normal': 0.
     ftpPort 1.3.6.1.4.1.161.19.3.3.2.150 integer read-write
Port used to for FTP. Default is 21.
     httpPort 1.3.6.1.4.1.161.19.3.3.2.151 integer read-write
Port used to for HTTP. Default is 80.
     snmpPort 1.3.6.1.4.1.161.19.3.3.2.153 integer read-write
Port used to for SNMP. Default is 161.
     snmpTrapPort 1.3.6.1.4.1.161.19.3.3.2.154 integer read-write
Port used to for SNMP Traps. Default is 162.
     syslogDomainNameAppend 1.3.6.1.4.1.161.19.3.3.2.156 integer read-write
Select whether to append the configured management domain name to the Syslog server name. For example, if dnsMgmtDomainName is set to 'example.com', syslogServerAddr is set to 'syslog1', and syslogDomainNameAppend is set to appendDomain, the Syslog Server name used would be 'syslog1.example.com'. Enumeration: 'appendDomain': 1, 'disableDomain': 0.
     syslogServerAddr 1.3.6.1.4.1.161.19.3.3.2.157 displaystring read-write
Syslog server address either in dotted decimal notation or a Fully Qualified Domain Name
     syslogServerPort 1.3.6.1.4.1.161.19.3.3.2.158 integer read-write
Listening port on the Syslog server. Default is 514.
     syslogMinLevel 1.3.6.1.4.1.161.19.3.3.2.159 integer read-write
Sets the minimum syslog severity to transmit. Messages with a lower severity value (i.e. numerically higher) than this will not be transmitted. Enumeration: 'info': 6, 'notice': 5, 'alert': 1, 'warning': 4, 'critical': 2, 'error': 3, 'debug': 7, 'fatal': 0.
     lan1DhcpRelease 1.3.6.1.4.1.161.19.3.3.2.201 integer read-write
Setting the variable to '1' will release LAN1's IP address and send a DHCP Release Message to the DHCP server. Applicable only when NAT is disabled. Enumeration: 'releaseIP': 1.
     lan1DhcpRenew 1.3.6.1.4.1.161.19.3.3.2.202 integer read-write
Setting the variable to '1' will renew LAN1's lease time for its current IP address. Applicable only when NAT is disabled. Enumeration: 'renewIP': 1.
     lan3DhcpRelease 1.3.6.1.4.1.161.19.3.3.2.203 integer read-write
Setting the variable to '1' will release LAN3's (RF Public) IP address and send a DHCP Release Message to the DHCP server. Applicable only when NAT is enabled. Enumeration: 'releaseIP': 1.
     lan3DhcpRenew 1.3.6.1.4.1.161.19.3.3.2.204 integer read-write
Setting the variable to '1' will renew LAN3's (RF Public) lease time for its current IP address. Applicable only when NAT is enabled. Enumeration: 'renewIP': 1.
     natDhcpRelease 1.3.6.1.4.1.161.19.3.3.2.205 integer read-write
Setting the variable to '1' will release WAN's (NAT Public) IP address and send a DHCP Release Message to the DHCP server. Applicable only when NAT is enabled. Enumeration: 'releaseIP': 1.
     natDhcpRenew 1.3.6.1.4.1.161.19.3.3.2.206 integer read-write
Setting the variable to '1' will renew WAN's (NAT Public) lease time for its current IP address. Applicable only when NAT is enabled. Enumeration: 'renewIP': 1.
     region 1.3.6.1.4.1.161.19.3.3.2.207 integer read-only
Set Region Code for the Unit. Enumeration: 'europe': 3, 'none': 0, 'northAmerica': 2, 'otherRegulatory': 1, 'southAmerica': 4, 'africa': 7, 'asia': 6, 'oceania': 5.
     regionAsia 1.3.6.1.4.1.161.19.3.3.2.208 integer read-write
Country Code for Asia. Enumeration: 'none': 0, 'indonesia': 3, 'india': 2, 'russiacategory2': 5, 'russiacategory3': 6, 'russiacategory1': 4, 'russiacategory4': 7, 'vietnam': 8.
     regionEurope 1.3.6.1.4.1.161.19.3.3.2.209 integer read-write
Country Code for Europe. Enumeration: 'none': 0, 'unitedkingdom': 14, 'portugal': 11, 'denmark': 4, 'finland': 5, 'serbia': 13, 'liechtenstein': 9, 'iceland': 8, 'germany': 6, 'ireland': 3, 'greece': 7, 'switzerland': 12, 'norway': 10, 'spain': 2.
     regionNorthAmerica 1.3.6.1.4.1.161.19.3.3.2.210 integer read-write
Country Code for North America. Enumeration: 'canada': 3, 'none': 0, 'mexico': 4, 'unitedStates': 2.
     regionOceania 1.3.6.1.4.1.161.19.3.3.2.211 integer read-write
Country Code for Oceania. Enumeration: 'none': 0, 'australia': 2.
     regionSouthAmerica 1.3.6.1.4.1.161.19.3.3.2.212 integer read-write
Country Code for South America. Enumeration: 'brazil': 2, 'none': 0.
     regionOtherRegulatory 1.3.6.1.4.1.161.19.3.3.2.213 integer read-write
Regulatory setting for governing regulatory body. Enumeration: 'otherETSI': 3, 'none': 0, 'other': 1, 'otherFCC': 2.
     interleave 1.3.6.1.4.1.161.19.3.3.2.214 integer read-write
Engineering use only. Enumeration: 'default': 0, 'disabled': 1, 'enabled': 2.
     receiveQualityDebug 1.3.6.1.4.1.161.19.3.3.2.215 integer read-write
Enable or disable receive quality calculations for every packet. Enabling(1) will calulate receive quality on all receiving packets. Due to load on CPU, will slightly packet per second capabilities on AP/BH. Default to disabled for all radios. Only applicable to GenII OFDM products and up. Enumeration: 'enable': 1, 'disable': 0.
     apType 1.3.6.1.4.1.161.19.3.3.2.216 integer read-write
AP Mode of Operation. In standardAP mode, all possible sync sources will be made availble and used for autoSync operation. In remoteAP mode, sync over power port will not be available as a sync source. Remote AP mode is where the AP's timing port is connected to an SM's timing port via a sync cable. In this mode, GPS data is unavailable and sync over power port shouldn't be used. If sync over power is desired, and a CMM or other sync over power device is in use, then select standardAP mode. Enumeration: 'remoteAP': 1, 'standardAP': 0.
     regionAfrica 1.3.6.1.4.1.161.19.3.3.2.217 integer read-write
Country Code for Africa. Enumeration: 'none': 0, 'algeria': 2.
     addCustomFreqMimo 1.3.6.1.4.1.161.19.3.3.2.218 displaystring read-write
Adds a particular frequency, applicable for both the AP and SM.
     removeCustomFreqMimo 1.3.6.1.4.1.161.19.3.3.2.219 displaystring read-write
Removes a particular frequency, applicable for both the AP and SM.
     timedSpectrumAnalysisDurationBox 1.3.6.1.4.1.161.19.3.3.2.220 integer read-write
Value in seconds for a timed spectrum analysis. Range is 10-1000 seconds.
     spectrumAnalysisActionBox 1.3.6.1.4.1.161.19.3.3.2.221 integer read-write
Start or stop timed or continuous Spectrum Analysis and also give status. (0) - Stop Spectrum Analysis (1) - Start Timed Spectrum Analysis (2) - Start Continuous Spectrum Analysis (3) - Idle, no Spectrum Analysis results. (4) - Idle, Spectrum Analysis results available. (5) - Timed or Remote Spectrum Analysis in progress. (6) - Continuous Spectrum Analysis in progress. Note: Continuous mode has a max of 24 hours. (7) - Spectrum Analyzer not ready. Enumeration: 'stopSpectrumAnalysis': 0, 'startTimedSpectrumAnalysis': 1, 'startContinuousSpectrumAnalysis': 2, 'idleNoSpectrumAnalysis': 3, 'notReady': 7, 'idleCompleteSpectrumAnalysis': 4, 'inProgressTimedSpectrumAnalysis': 5, 'inProgressContinuousSpectrumAnalysis': 6.
 whispBoxControls 1.3.6.1.4.1.161.19.3.3.3
     saveFlash 1.3.6.1.4.1.161.19.3.3.3.1 integer read-write
This variable is currently deprecated. Enumeration: 'saveToFlash': 1, 'doNotSaveToFlash': 0.
     reboot 1.3.6.1.4.1.161.19.3.3.3.2 integer read-write
Setting the variable to 1 will reboot the unit. When the unit finishes rebooting, it will be in finishedReboot state. Enumeration: 'finishedReboot': 0, 'reboot': 1.
     clearEventLog 1.3.6.1.4.1.161.19.3.3.3.3 integer read-write
Setting the variable to 1 will clear the event log. Enumeration: 'notClear': 0, 'clear': 1.
     rebootIfRequired 1.3.6.1.4.1.161.19.3.3.3.4 integer read-write
Setting the variable to 1 will reboot the unit if reboot is required. Enumeration: 'rebootRequired': 1, 'rebootNotRequired': 0.
     clearBERStats 1.3.6.1.4.1.161.19.3.3.3.5 integer read-write
Set to clear the BER statistics by sending a 'clearBERStats'. Value is set back to 'doNotClearBERStats' When action is complete. Enumeration: 'clearBERStats': 1, 'doNotClearBERStats': 0.
     updateDevice 1.3.6.1.4.1.161.19.3.3.3.6 integer read-write
Use to update the software on the device Enumeration: 'enable': 1, 'disable': 0.
 whispBoxBridgeTable 1.3.6.1.4.1.161.19.3.3.4 no-access
Bridge table.
     whispBoxBridgeEntry 1.3.6.1.4.1.161.19.3.3.4.1 no-access
Bridge entry.
         whispBridgeMacAddr 1.3.6.1.4.1.161.19.3.3.4.1.1 macaddress read-only
MAC Address of the registered enity.
         whispBridgeDesLuid 1.3.6.1.4.1.161.19.3.3.4.1.2 whispluid read-only
This is the Local Unit Identifier assigned to Subscriber Modems.
         whispBridgeAge 1.3.6.1.4.1.161.19.3.3.4.1.3 integer read-only
Table entry last access age in minutes.
         whispBridgeExt 1.3.6.1.4.1.161.19.3.3.4.1.4 integer read-only
Timeout extension flag for entries which also reside in the PNA APR cache.
         whispBridgeHash 1.3.6.1.4.1.161.19.3.3.4.1.5 integer read-only
Hash table array index.
         whispBridgeCAM 1.3.6.1.4.1.161.19.3.3.4.1.6 integer read-only
This entry is deprecated.
 whispBoxEventLog 1.3.6.1.4.1.161.19.3.3.5
     whispBoxEvntLog 1.3.6.1.4.1.161.19.3.3.5.1 eventstring read-only
Event log for AP and SM.
 whispBoxConf 1.3.6.1.4.1.161.19.3.3.6
     whispBoxGroups 1.3.6.1.4.1.161.19.3.3.6.1
         whispBoxAttributesGroup 1.3.6.1.4.1.161.19.3.3.6.1.1
Canopy Box Level Attributes group.
         whispBoxControlGroup 1.3.6.1.4.1.161.19.3.3.6.1.2
Canopy Box Level control group.
         whispBoxBTGroup 1.3.6.1.4.1.161.19.3.3.6.1.3
Canopy Box Bridging Table group.
         whispBoxVLANTableGroup 1.3.6.1.4.1.161.19.3.3.6.1.4
Canopy Box VLAN member Table group.
         whispBoxCPTableGroup 1.3.6.1.4.1.161.19.3.3.6.1.5
Code Point Table group.
         whispBoxUserTableGroup 1.3.6.1.4.1.161.19.3.3.6.1.6
Canopy Box User Information Table group.
         whispLayer2NeighborTableGroup 1.3.6.1.4.1.161.19.3.3.6.1.7
Canopy Box Layer 2 Neighbor information.
         whispBoxNotifGroup 1.3.6.1.4.1.161.19.3.3.6.1.8
Canopy Box Notification Group.
 whispBoxBridgeVar 1.3.6.1.4.1.161.19.3.3.7
     whispBridgeTbUsed 1.3.6.1.4.1.161.19.3.3.7.1 integer read-only
Number of used entries in bridging table.
     whispBridgeTbFree 1.3.6.1.4.1.161.19.3.3.7.2 integer read-only
Number of free entries in bridging table.
     whispBridgeTbErr 1.3.6.1.4.1.161.19.3.3.7.3 integer read-only
Bridging table errors.
 whispVLANTable 1.3.6.1.4.1.161.19.3.3.8 no-access
VLAN member table.
     whispVLANEntry 1.3.6.1.4.1.161.19.3.3.8.1 no-access
VLAN entry.
         whispVID 1.3.6.1.4.1.161.19.3.3.8.1.1 integer read-only
VLAN member ID.
         whispVType 1.3.6.1.4.1.161.19.3.3.8.1.2 displaystring read-only
VLAN member type.
         whispVAge 1.3.6.1.4.1.161.19.3.3.8.1.3 integer read-only
VLAN member age.
 whispBoxCPVar 1.3.6.1.4.1.161.19.3.3.9
     codePoint0 1.3.6.1.4.1.161.19.3.3.9.1 integer read-only
Code Point 0.
     codePoint1 1.3.6.1.4.1.161.19.3.3.9.2 integer read-write
Code Point 1.
     codePoint2 1.3.6.1.4.1.161.19.3.3.9.3 integer read-write
Code Point 2.
     codePoint3 1.3.6.1.4.1.161.19.3.3.9.4 integer read-write
Code Point 3.
     codePoint4 1.3.6.1.4.1.161.19.3.3.9.5 integer read-write
Code Point 4.
     codePoint5 1.3.6.1.4.1.161.19.3.3.9.6 integer read-write
Code Point 5.
     codePoint6 1.3.6.1.4.1.161.19.3.3.9.7 integer read-write
Code Point 6.
     codePoint7 1.3.6.1.4.1.161.19.3.3.9.8 integer read-write
Code Point 7.
     codePoint8 1.3.6.1.4.1.161.19.3.3.9.9 integer read-write
Code Point 8.
     codePoint9 1.3.6.1.4.1.161.19.3.3.9.10 integer read-write
Code Point 9.
     codePoint10 1.3.6.1.4.1.161.19.3.3.9.11 integer read-write
Code Point 10.
     codePoint11 1.3.6.1.4.1.161.19.3.3.9.12 integer read-write
Code Point 11.
     codePoint12 1.3.6.1.4.1.161.19.3.3.9.13 integer read-write
Code Point 12.
     codePoint13 1.3.6.1.4.1.161.19.3.3.9.14 integer read-write
Code Point 13.
     codePoint14 1.3.6.1.4.1.161.19.3.3.9.15 integer read-write
Code Point 14.
     codePoint15 1.3.6.1.4.1.161.19.3.3.9.16 integer read-write
Code Point 15.
     codePoint16 1.3.6.1.4.1.161.19.3.3.9.17 integer read-write
Code Point 16.
     codePoint17 1.3.6.1.4.1.161.19.3.3.9.18 integer read-write
Code Point 17.
     codePoint18 1.3.6.1.4.1.161.19.3.3.9.19 integer read-write
Code Point 18.
     codePoint19 1.3.6.1.4.1.161.19.3.3.9.20 integer read-write
Code Point 19.
     codePoint20 1.3.6.1.4.1.161.19.3.3.9.21 integer read-write
Code Point 20.
     codePoint21 1.3.6.1.4.1.161.19.3.3.9.22 integer read-write
Code Point 21.
     codePoint22 1.3.6.1.4.1.161.19.3.3.9.23 integer read-write
Code Point 22.
     codePoint23 1.3.6.1.4.1.161.19.3.3.9.24 integer read-write
Code Point 23.
     codePoint24 1.3.6.1.4.1.161.19.3.3.9.25 integer read-write
Code Point 24.
     codePoint25 1.3.6.1.4.1.161.19.3.3.9.26 integer read-write
Code Point 25.
     codePoint26 1.3.6.1.4.1.161.19.3.3.9.27 integer read-write
Code Point 26.
     codePoint27 1.3.6.1.4.1.161.19.3.3.9.28 integer read-write
Code Point 27.
     codePoint28 1.3.6.1.4.1.161.19.3.3.9.29 integer read-write
Code Point 28.
     codePoint29 1.3.6.1.4.1.161.19.3.3.9.30 integer read-write
Code Point 29.
     codePoint30 1.3.6.1.4.1.161.19.3.3.9.31 integer read-write
Code Point 30.
     codePoint31 1.3.6.1.4.1.161.19.3.3.9.32 integer read-write
Code Point 31.
     codePoint32 1.3.6.1.4.1.161.19.3.3.9.33 integer read-write
Code Point 32.
     codePoint33 1.3.6.1.4.1.161.19.3.3.9.34 integer read-write
Code Point 33.
     codePoint34 1.3.6.1.4.1.161.19.3.3.9.35 integer read-write
Code Point 34.
     codePoint35 1.3.6.1.4.1.161.19.3.3.9.36 integer read-write
Code Point 35.
     codePoint36 1.3.6.1.4.1.161.19.3.3.9.37 integer read-write
Code Point 36.
     codePoint37 1.3.6.1.4.1.161.19.3.3.9.38 integer read-write
Code Point 37.
     codePoint38 1.3.6.1.4.1.161.19.3.3.9.39 integer read-write
Code Point 38.
     codePoint39 1.3.6.1.4.1.161.19.3.3.9.40 integer read-write
Code Point 39.
     codePoint40 1.3.6.1.4.1.161.19.3.3.9.41 integer read-write
Code Point 40.
     codePoint41 1.3.6.1.4.1.161.19.3.3.9.42 integer read-write
Code Point 41.
     codePoint42 1.3.6.1.4.1.161.19.3.3.9.43 integer read-write
Code Point 42.
     codePoint43 1.3.6.1.4.1.161.19.3.3.9.44 integer read-write
Code Point 43.
     codePoint44 1.3.6.1.4.1.161.19.3.3.9.45 integer read-write
Code Point 44.
     codePoint45 1.3.6.1.4.1.161.19.3.3.9.46 integer read-write
Code Point 45.
     codePoint46 1.3.6.1.4.1.161.19.3.3.9.47 integer read-write
Code Point 46.
     codePoint47 1.3.6.1.4.1.161.19.3.3.9.48 integer read-write
Code Point 47.
     codePoint48 1.3.6.1.4.1.161.19.3.3.9.49 integer read-only
Code Point 48.
     codePoint49 1.3.6.1.4.1.161.19.3.3.9.50 integer read-write
Code Point 49.
     codePoint50 1.3.6.1.4.1.161.19.3.3.9.51 integer read-write
Code Point 50.
     codePoint51 1.3.6.1.4.1.161.19.3.3.9.52 integer read-write
Code Point 51.
     codePoint52 1.3.6.1.4.1.161.19.3.3.9.53 integer read-write
Code Point 52.
     codePoint53 1.3.6.1.4.1.161.19.3.3.9.54 integer read-write
Code Point 53.
     codePoint54 1.3.6.1.4.1.161.19.3.3.9.55 integer read-write
Code Point 54.
     codePoint55 1.3.6.1.4.1.161.19.3.3.9.56 integer read-write
Code Point 55.
     codePoint56 1.3.6.1.4.1.161.19.3.3.9.57 integer read-only
Code Point 56.
     codePoint57 1.3.6.1.4.1.161.19.3.3.9.58 integer read-write
Code Point 57.
     codePoint58 1.3.6.1.4.1.161.19.3.3.9.59 integer read-write
Code Point 58.
     codePoint59 1.3.6.1.4.1.161.19.3.3.9.60 integer read-write
Code Point 59.
     codePoint60 1.3.6.1.4.1.161.19.3.3.9.61 integer read-write
Code Point 60.
     codePoint61 1.3.6.1.4.1.161.19.3.3.9.62 integer read-write
Code Point 61.
     codePoint62 1.3.6.1.4.1.161.19.3.3.9.63 integer read-write
Code Point 62.
     codePoint63 1.3.6.1.4.1.161.19.3.3.9.64 integer read-write
Code Point 63.
 whispUserTable 1.3.6.1.4.1.161.19.3.3.10 no-access
User information table.
       whispUserEntry 1.3.6.1.4.1.161.19.3.3.10.1 no-access
User entry.
           entryIndex 1.3.6.1.4.1.161.19.3.3.10.1.1 integer read-only
User information table index.
           userLoginName 1.3.6.1.4.1.161.19.3.3.10.1.2 displaystring read-only
User name.
           userPswd 1.3.6.1.4.1.161.19.3.3.10.1.3 displaystring read-only
User password.
           accessLevel 1.3.6.1.4.1.161.19.3.3.10.1.4 integer read-only
User access level.
           loginStatus 1.3.6.1.4.1.161.19.3.3.10.1.5 integer read-only
User current status.
           loginMethod 1.3.6.1.4.1.161.19.3.3.10.1.6 integer read-only
User login method.
           sessionTime 1.3.6.1.4.1.161.19.3.3.10.1.7 integer read-only
Users logged in session time.
 whispLayer2NeighborTable 1.3.6.1.4.1.161.19.3.3.11 no-access
Neighbor information table.
       whispLayer2NeighborEntry 1.3.6.1.4.1.161.19.3.3.11.1 no-access
Neighbor Entry.
           entryL2Index 1.3.6.1.4.1.161.19.3.3.11.1.1 integer read-only
Neighbor information table index.
           neighborMAC 1.3.6.1.4.1.161.19.3.3.11.1.2 displaystring read-only
Neighbor MAC.
           neighborIP 1.3.6.1.4.1.161.19.3.3.11.1.3 displaystring read-only
Neighbor IP.
           neighborSiteName 1.3.6.1.4.1.161.19.3.3.11.1.4 displaystring read-only
Neighbor Site Name.
 whispBoxEvent 1.3.6.1.4.1.161.19.3.3.12
       whispBoxDHCPClientEvent 1.3.6.1.4.1.161.19.3.3.12.1
           boxLan1DHCPClientEvent 1.3.6.1.4.1.161.19.3.3.12.1.1
Lan1 DHCP Client has received a new address via DHCP
 whispBoxDNS 1.3.6.1.4.1.161.19.3.3.13
       dnsIpState 1.3.6.1.4.1.161.19.3.3.13.1 integer read-write
Configuration for DNS server IP addresses of the management interface are learned: 0 : Manual, must configure dnsPrimaryMgmtIP and dnsAlternateMgmtIP 1 : Automatic, DNS servers IP addresses are learned from DHCP response of the interface Enumeration: 'automatic': 1, 'manual': 0.
       dnsPrimaryMgmtIP 1.3.6.1.4.1.161.19.3.3.13.2 ipaddress read-write
Primary DNS IP address for the management interface.
       dnsAlternateMgmtIP 1.3.6.1.4.1.161.19.3.3.13.3 ipaddress read-write
Secondary DNS IP address for the management interface.
       dnsMgmtDomainName 1.3.6.1.4.1.161.19.3.3.13.4 displaystring read-write
Domain Name to use for management DNS configuration. This domain name may be concatonated to DNS names used configured for the management interface.
       trapDomainNameAppend 1.3.6.1.4.1.161.19.3.3.13.5 integer read-write
Select whether to append the configured management domain name to the configured trap names. For example, if dnsMgmtDomainName is set to 'example.com', trap1 is set to 'trap1', and trapDomainNameAppend is set to appendDomain, the trap1 name used would be 'trap1.example.com'. Enumeration: 'appendDomain': 1, 'disableDomain': 0.
       trap1 1.3.6.1.4.1.161.19.3.3.13.6 displaystring read-write
SNMP Trap IP Address 1. Format is either an IP address or DNS name.
       trap2 1.3.6.1.4.1.161.19.3.3.13.7 displaystring read-write
SNMP Trap IP Address 2. Format is either an IP address or DNS name.
       trap3 1.3.6.1.4.1.161.19.3.3.13.8 displaystring read-write
SNMP Trap IP Address 3. Format is either an IP address or DNS name.
       trap4 1.3.6.1.4.1.161.19.3.3.13.9 displaystring read-write
SNMP Trap IP Address 4. Format is either an IP address or DNS name.
       trap5 1.3.6.1.4.1.161.19.3.3.13.10 displaystring read-write
SNMP Trap IP Address 5. Format is either an IP address or DNS name.
       trap6 1.3.6.1.4.1.161.19.3.3.13.11 displaystring read-write
SNMP Trap IP Address 6. Format is either an IP address or DNS name.
       trap7 1.3.6.1.4.1.161.19.3.3.13.12 displaystring read-write
SNMP Trap IP Address 7. Format is either an IP address or DNS name.
       trap8 1.3.6.1.4.1.161.19.3.3.13.13 displaystring read-write
SNMP Trap IP Address 8. Format is either an IP address or DNS name.
       trap9 1.3.6.1.4.1.161.19.3.3.13.14 displaystring read-write
SNMP Trap IP Address 9. Format is either an IP address or DNS name.
       trap10 1.3.6.1.4.1.161.19.3.3.13.15 displaystring read-write
SNMP Trap IP Address 10. Format is either an IP address or DNS name.
 whispBoxRFPhysical 1.3.6.1.4.1.161.19.3.3.15
       whispBoxRFPhysicalRadios 1.3.6.1.4.1.161.19.3.3.15.1 no-access
Radio information table.
           whispBoxRFPhysicalRadioEntry 1.3.6.1.4.1.161.19.3.3.15.1.1 no-access
Radio information table entry.
               radioIndex 1.3.6.1.4.1.161.19.3.3.15.1.1.1 integer read-only
Radio Index.
               radioType 1.3.6.1.4.1.161.19.3.3.15.1.1.2 integer read-only
Indicates if the radio is FSK or OFDM. Enumeration: 'fsk': 0, 'ofdm': 1.
               radioPaths 1.3.6.1.4.1.161.19.3.3.15.1.1.3 integer read-only
Indicates number of paths. For FSK or OFDM (non-MIMO), this is 1. For MIMO, it can be greater (with a current maximum of 2).
       whispBoxRFPhysicalRadioPaths 1.3.6.1.4.1.161.19.3.3.15.2 no-access
Radio path information table.
           whispBoxRFPhysicalRadioPathEntry 1.3.6.1.4.1.161.19.3.3.15.2.1 no-access
Radio path table entry.
               pathIndex 1.3.6.1.4.1.161.19.3.3.15.2.1.1 integer read-only
Path Index.
       whispBoxRFPhysicalRadioFrequencies 1.3.6.1.4.1.161.19.3.3.15.3 no-access
Available frequency information table.
           whispBoxRFPhysicalRadioFrequencyEntry 1.3.6.1.4.1.161.19.3.3.15.3.1 no-access
Available frequency table entry.
               frequency 1.3.6.1.4.1.161.19.3.3.15.3.1.1 integer read-only
Frequency.
 whispBoxRFConfig 1.3.6.1.4.1.161.19.3.3.16
       whispBoxRFConfigRadios 1.3.6.1.4.1.161.19.3.3.16.1 no-access
Radio configuration table.
           whispBoxRFConfigRadioEntry 1.3.6.1.4.1.161.19.3.3.16.1.1 no-access
Radio config table entry.
               radioConfigIndex 1.3.6.1.4.1.161.19.3.3.16.1.1.1 integer read-only
Radio Config Index.
               radioFrequencyBand 1.3.6.1.4.1.161.19.3.3.16.1.1.2 integer read-only
Currently configured radio band. Enumeration: 'band3700': 4, 'band5200': 7, 'band3500': 3, 'band6050': 12, 'band700': 0, 'band4900': 5, 'band900': 1, 'band5400': 8, 'band2400': 2, 'band5900': 11, 'band5700': 9, 'band5100': 6, 'band5800': 10.